[PATCH] arm64: dts: rockchip: include uhs support for rockpro64

[PATCH] arm64: dts: rockchip: include uhs support for rockpro64

[Christian Löhle]

The DesignWare Host Controller has full UHS-I support, so use it.

Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
---
 arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 6bff8db7d33e..d22a489ec214 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -722,6 +722,7 @@ &sdmmc {
 	max-frequency = <150000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	sd-uhs-sdr104;
 	vmmc-supply = <&vcc3v0_sd>;
 	vqmmc-supply = <&vcc_sdio>;
 	status = "okay";
-- 
2.31.1
Hyperstone GmbH | Line-Eid-Strasse 3 | 78467 Konstanz
Managing Directors: Dr. Jan Peter Berns.
Commercial register of local courts: Freiburg HRB381782

[PATCH] arm64: dts: rockchip: include uhs support for rockpro64

[Christian Löhle]

The DesignWare Host Controller has full UHS-I support, so use it.

Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
---
 arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 6bff8db7d33e..d22a489ec214 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -722,6 +722,7 @@ &sdmmc {
 	max-frequency = <150000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	sd-uhs-sdr104;
 	vmmc-supply = <&vcc3v0_sd>;
 	vqmmc-supply = <&vcc_sdio>;
 	status = "okay";
-- 
2.31.1
Hyperstone GmbH | Line-Eid-Strasse 3 | 78467 Konstanz
Managing Directors: Dr. Jan Peter Berns.
Commercial register of local courts: Freiburg HRB381782


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH] arm64: dts: rockchip: include uhs support for rockpro64

[Christian Löhle]

The DesignWare Host Controller has full UHS-I support, so use it.

Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
---
 arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 6bff8db7d33e..d22a489ec214 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -722,6 +722,7 @@ &sdmmc {
 	max-frequency = <150000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	sd-uhs-sdr104;
 	vmmc-supply = <&vcc3v0_sd>;
 	vqmmc-supply = <&vcc_sdio>;
 	status = "okay";
-- 
2.31.1
Hyperstone GmbH | Line-Eid-Strasse 3 | 78467 Konstanz
Managing Directors: Dr. Jan Peter Berns.
Commercial register of local courts: Freiburg HRB381782


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] arm64: dts: rockchip: include uhs support for rockpro64

[Soeren Moch]

On 27.04.21 08:20, Christian L?hle wrote:
> The DesignWare Host Controller has full UHS-I support, so use it.
Enabling this UHS support makes 'reboot' hang when booting the RockPro64
from SD card. It would work when booting from eMMC, or with a modified
ATF which does a power cycle on reboot.

But for general use it is not save to enable UHS support, or did I miss
some recent changes?

Regards,
Soeren
>
> Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> index 6bff8db7d33e..d22a489ec214 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> @@ -722,6 +722,7 @@ &sdmmc {
>  	max-frequency = <150000000>;
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
> +	sd-uhs-sdr104;
>  	vmmc-supply = <&vcc3v0_sd>;
>  	vqmmc-supply = <&vcc_sdio>;
>  	status = "okay";

Re: [PATCH] arm64: dts: rockchip: include uhs support for rockpro64

[Soeren Moch]

On 27.04.21 08:20, Christian L?hle wrote:
> The DesignWare Host Controller has full UHS-I support, so use it.
Enabling this UHS support makes 'reboot' hang when booting the RockPro64
from SD card. It would work when booting from eMMC, or with a modified
ATF which does a power cycle on reboot.

But for general use it is not save to enable UHS support, or did I miss
some recent changes?

Regards,
Soeren
>
> Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> index 6bff8db7d33e..d22a489ec214 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> @@ -722,6 +722,7 @@ &sdmmc {
>  	max-frequency = <150000000>;
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
> +	sd-uhs-sdr104;
>  	vmmc-supply = <&vcc3v0_sd>;
>  	vqmmc-supply = <&vcc_sdio>;
>  	status = "okay";


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH] arm64: dts: rockchip: include uhs support for rockpro64

[Soeren Moch]

On 27.04.21 08:20, Christian L?hle wrote:
> The DesignWare Host Controller has full UHS-I support, so use it.
Enabling this UHS support makes 'reboot' hang when booting the RockPro64
from SD card. It would work when booting from eMMC, or with a modified
ATF which does a power cycle on reboot.

But for general use it is not save to enable UHS support, or did I miss
some recent changes?

Regards,
Soeren
>
> Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> index 6bff8db7d33e..d22a489ec214 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> @@ -722,6 +722,7 @@ &sdmmc {
>  	max-frequency = <150000000>;
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
> +	sd-uhs-sdr104;
>  	vmmc-supply = <&vcc3v0_sd>;
>  	vqmmc-supply = <&vcc_sdio>;
>  	status = "okay";


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] arm64: dts: rockchip: include uhs support for rockpro64

[Christian Löhle]

Oh okay, I was not aware of this issue
and have not encountered it yet.
But wouldn't it be more appropriate
to get u-boot to power cycle the host controller at boot?


From: Soeren Moch <smoch@web.de>
Sent: Tuesday, April 27, 2021 5:07 PM
To: Christian Löhle <CLoehle@hyperstone.com>; robh+dt@kernel.org <robh+dt@kernel.org>; heiko@sntech.de <heiko@sntech.de>; jbx6244@gmail.com <jbx6244@gmail.com>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arm-kernel@lists.infradead.org <linux-arm-kernel@lists.infradead.org>; linux-rockchip@lists.infradead.org <linux-rockchip@lists.infradead.org>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] arm64: dts: rockchip: include uhs support for rockpro64 
 
On 27.04.21 08:20, Christian L?hle wrote:
> The DesignWare Host Controller has full UHS-I support, so use it.
Enabling this UHS support makes 'reboot' hang when booting the RockPro64
from SD card. It would work when booting from eMMC, or with a modified
ATF which does a power cycle on reboot.

But for general use it is not save to enable UHS support, or did I miss
some recent changes?

Regards,
Soeren
>
> Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> index 6bff8db7d33e..d22a489ec214 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> @@ -722,6 +722,7 @@ &sdmmc {
>        max-frequency = <150000000>;
>        pinctrl-names = "default";
>        pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
> +     sd-uhs-sdr104;
>        vmmc-supply = <&vcc3v0_sd>;
>        vqmmc-supply = <&vcc_sdio>;
>        status = "okay";

Hyperstone GmbH | Line-Eid-Strasse 3 | 78467 Konstanz
Managing Directors: Dr. Jan Peter Berns.
Commercial register of local courts: Freiburg HRB381782

Re: [PATCH] arm64: dts: rockchip: include uhs support for rockpro64

[Christian Löhle]

Oh okay, I was not aware of this issue
and have not encountered it yet.
But wouldn't it be more appropriate
to get u-boot to power cycle the host controller at boot?


From: Soeren Moch <smoch@web.de>
Sent: Tuesday, April 27, 2021 5:07 PM
To: Christian Löhle <CLoehle@hyperstone.com>; robh+dt@kernel.org <robh+dt@kernel.org>; heiko@sntech.de <heiko@sntech.de>; jbx6244@gmail.com <jbx6244@gmail.com>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arm-kernel@lists.infradead.org <linux-arm-kernel@lists.infradead.org>; linux-rockchip@lists.infradead.org <linux-rockchip@lists.infradead.org>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] arm64: dts: rockchip: include uhs support for rockpro64 
 
On 27.04.21 08:20, Christian L?hle wrote:
> The DesignWare Host Controller has full UHS-I support, so use it.
Enabling this UHS support makes 'reboot' hang when booting the RockPro64
from SD card. It would work when booting from eMMC, or with a modified
ATF which does a power cycle on reboot.

But for general use it is not save to enable UHS support, or did I miss
some recent changes?

Regards,
Soeren
>
> Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> index 6bff8db7d33e..d22a489ec214 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> @@ -722,6 +722,7 @@ &sdmmc {
>        max-frequency = <150000000>;
>        pinctrl-names = "default";
>        pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
> +     sd-uhs-sdr104;
>        vmmc-supply = <&vcc3v0_sd>;
>        vqmmc-supply = <&vcc_sdio>;
>        status = "okay";

Hyperstone GmbH | Line-Eid-Strasse 3 | 78467 Konstanz
Managing Directors: Dr. Jan Peter Berns.
Commercial register of local courts: Freiburg HRB381782


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH] arm64: dts: rockchip: include uhs support for rockpro64

[Christian Löhle]

Oh okay, I was not aware of this issue
and have not encountered it yet.
But wouldn't it be more appropriate
to get u-boot to power cycle the host controller at boot?


From: Soeren Moch <smoch@web.de>
Sent: Tuesday, April 27, 2021 5:07 PM
To: Christian Löhle <CLoehle@hyperstone.com>; robh+dt@kernel.org <robh+dt@kernel.org>; heiko@sntech.de <heiko@sntech.de>; jbx6244@gmail.com <jbx6244@gmail.com>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arm-kernel@lists.infradead.org <linux-arm-kernel@lists.infradead.org>; linux-rockchip@lists.infradead.org <linux-rockchip@lists.infradead.org>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] arm64: dts: rockchip: include uhs support for rockpro64 
 
On 27.04.21 08:20, Christian L?hle wrote:
> The DesignWare Host Controller has full UHS-I support, so use it.
Enabling this UHS support makes 'reboot' hang when booting the RockPro64
from SD card. It would work when booting from eMMC, or with a modified
ATF which does a power cycle on reboot.

But for general use it is not save to enable UHS support, or did I miss
some recent changes?

Regards,
Soeren
>
> Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> index 6bff8db7d33e..d22a489ec214 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> @@ -722,6 +722,7 @@ &sdmmc {
>        max-frequency = <150000000>;
>        pinctrl-names = "default";
>        pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
> +     sd-uhs-sdr104;
>        vmmc-supply = <&vcc3v0_sd>;
>        vqmmc-supply = <&vcc_sdio>;
>        status = "okay";

Hyperstone GmbH | Line-Eid-Strasse 3 | 78467 Konstanz
Managing Directors: Dr. Jan Peter Berns.
Commercial register of local courts: Freiburg HRB381782


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] arm64: dts: rockchip: include uhs support for rockpro64

[Soeren Moch]

On 28.04.21 08:28, Christian Löhle wrote:
> Oh okay, I was not aware of this issue
> and have not encountered it yet.
> But wouldn't it be more appropriate
> to get u-boot to power cycle the host controller at boot?
This is not about power-cycling the host controller. We have to
power-cycle the SD card itself to switch it back to default speed and
3.3V operation. This is the mode the boot ROM expects.

Unfortunately there is no separate power switch for SD card power on
RockPro64. So we have to power-cycle the whole SoC. This obviously
cannot be done easily after reboot in u-boot, but can be done in trusted
firmware (TF-A, was called ATF before) at reboot. This is what I use on
my boards, see the hack in [1]. Rockchip seems to prefer soft reset,
maybe someone from Rockchip can comment on the exact reasons.

Regards,
Soeren


[1] https://github.com/s-moch/arm-trusted-firmware-rockpro64
>
>
> From: Soeren Moch <smoch@web.de>
> Sent: Tuesday, April 27, 2021 5:07 PM
> To: Christian Löhle <CLoehle@hyperstone.com>; robh+dt@kernel.org <robh+dt@kernel.org>; heiko@sntech.de <heiko@sntech.de>; jbx6244@gmail.com <jbx6244@gmail.com>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arm-kernel@lists.infradead.org <linux-arm-kernel@lists.infradead.org>; linux-rockchip@lists.infradead.org <linux-rockchip@lists.infradead.org>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
> Subject: Re: [PATCH] arm64: dts: rockchip: include uhs support for rockpro64
>  
> On 27.04.21 08:20, Christian L?hle wrote:
>> The DesignWare Host Controller has full UHS-I support, so use it.
> Enabling this UHS support makes 'reboot' hang when booting the RockPro64
> from SD card. It would work when booting from eMMC, or with a modified
> ATF which does a power cycle on reboot.
>
> But for general use it is not save to enable UHS support, or did I miss
> some recent changes?
>
> Regards,
> Soeren
>> Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
>> ---
>>   arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
>> index 6bff8db7d33e..d22a489ec214 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
>> @@ -722,6 +722,7 @@ &sdmmc {
>>         max-frequency = <150000000>;
>>         pinctrl-names = "default";
>>         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
>> +     sd-uhs-sdr104;
>>         vmmc-supply = <&vcc3v0_sd>;
>>         vqmmc-supply = <&vcc_sdio>;
>>         status = "okay";
> Hyperstone GmbH | Line-Eid-Strasse 3 | 78467 Konstanz
> Managing Directors: Dr. Jan Peter Berns.
> Commercial register of local courts: Freiburg HRB381782
>

Re: [PATCH] arm64: dts: rockchip: include uhs support for rockpro64

[Soeren Moch]

On 28.04.21 08:28, Christian Löhle wrote:
> Oh okay, I was not aware of this issue
> and have not encountered it yet.
> But wouldn't it be more appropriate
> to get u-boot to power cycle the host controller at boot?
This is not about power-cycling the host controller. We have to
power-cycle the SD card itself to switch it back to default speed and
3.3V operation. This is the mode the boot ROM expects.

Unfortunately there is no separate power switch for SD card power on
RockPro64. So we have to power-cycle the whole SoC. This obviously
cannot be done easily after reboot in u-boot, but can be done in trusted
firmware (TF-A, was called ATF before) at reboot. This is what I use on
my boards, see the hack in [1]. Rockchip seems to prefer soft reset,
maybe someone from Rockchip can comment on the exact reasons.

Regards,
Soeren


[1] https://github.com/s-moch/arm-trusted-firmware-rockpro64
>
>
> From: Soeren Moch <smoch@web.de>
> Sent: Tuesday, April 27, 2021 5:07 PM
> To: Christian Löhle <CLoehle@hyperstone.com>; robh+dt@kernel.org <robh+dt@kernel.org>; heiko@sntech.de <heiko@sntech.de>; jbx6244@gmail.com <jbx6244@gmail.com>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arm-kernel@lists.infradead.org <linux-arm-kernel@lists.infradead.org>; linux-rockchip@lists.infradead.org <linux-rockchip@lists.infradead.org>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
> Subject: Re: [PATCH] arm64: dts: rockchip: include uhs support for rockpro64
>  
> On 27.04.21 08:20, Christian L?hle wrote:
>> The DesignWare Host Controller has full UHS-I support, so use it.
> Enabling this UHS support makes 'reboot' hang when booting the RockPro64
> from SD card. It would work when booting from eMMC, or with a modified
> ATF which does a power cycle on reboot.
>
> But for general use it is not save to enable UHS support, or did I miss
> some recent changes?
>
> Regards,
> Soeren
>> Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
>> ---
>>   arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
>> index 6bff8db7d33e..d22a489ec214 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
>> @@ -722,6 +722,7 @@ &sdmmc {
>>         max-frequency = <150000000>;
>>         pinctrl-names = "default";
>>         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
>> +     sd-uhs-sdr104;
>>         vmmc-supply = <&vcc3v0_sd>;
>>         vqmmc-supply = <&vcc_sdio>;
>>         status = "okay";
> Hyperstone GmbH | Line-Eid-Strasse 3 | 78467 Konstanz
> Managing Directors: Dr. Jan Peter Berns.
> Commercial register of local courts: Freiburg HRB381782
>


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH] arm64: dts: rockchip: include uhs support for rockpro64

[Soeren Moch]

On 28.04.21 08:28, Christian Löhle wrote:
> Oh okay, I was not aware of this issue
> and have not encountered it yet.
> But wouldn't it be more appropriate
> to get u-boot to power cycle the host controller at boot?
This is not about power-cycling the host controller. We have to
power-cycle the SD card itself to switch it back to default speed and
3.3V operation. This is the mode the boot ROM expects.

Unfortunately there is no separate power switch for SD card power on
RockPro64. So we have to power-cycle the whole SoC. This obviously
cannot be done easily after reboot in u-boot, but can be done in trusted
firmware (TF-A, was called ATF before) at reboot. This is what I use on
my boards, see the hack in [1]. Rockchip seems to prefer soft reset,
maybe someone from Rockchip can comment on the exact reasons.

Regards,
Soeren


[1] https://github.com/s-moch/arm-trusted-firmware-rockpro64
>
>
> From: Soeren Moch <smoch@web.de>
> Sent: Tuesday, April 27, 2021 5:07 PM
> To: Christian Löhle <CLoehle@hyperstone.com>; robh+dt@kernel.org <robh+dt@kernel.org>; heiko@sntech.de <heiko@sntech.de>; jbx6244@gmail.com <jbx6244@gmail.com>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arm-kernel@lists.infradead.org <linux-arm-kernel@lists.infradead.org>; linux-rockchip@lists.infradead.org <linux-rockchip@lists.infradead.org>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
> Subject: Re: [PATCH] arm64: dts: rockchip: include uhs support for rockpro64
>  
> On 27.04.21 08:20, Christian L?hle wrote:
>> The DesignWare Host Controller has full UHS-I support, so use it.
> Enabling this UHS support makes 'reboot' hang when booting the RockPro64
> from SD card. It would work when booting from eMMC, or with a modified
> ATF which does a power cycle on reboot.
>
> But for general use it is not save to enable UHS support, or did I miss
> some recent changes?
>
> Regards,
> Soeren
>> Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
>> ---
>>   arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
>> index 6bff8db7d33e..d22a489ec214 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
>> @@ -722,6 +722,7 @@ &sdmmc {
>>         max-frequency = <150000000>;
>>         pinctrl-names = "default";
>>         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
>> +     sd-uhs-sdr104;
>>         vmmc-supply = <&vcc3v0_sd>;
>>         vqmmc-supply = <&vcc_sdio>;
>>         status = "okay";
> Hyperstone GmbH | Line-Eid-Strasse 3 | 78467 Konstanz
> Managing Directors: Dr. Jan Peter Berns.
> Commercial register of local courts: Freiburg HRB381782
>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel