Re: [EXTERNAL] [rocko/master][PATCH 18/30] udma-lld-rtos: Added support for udma-lld on rtos (initial version)

["Radhakrishnan, Mahesh" <m-radhakrishnan2@ti.com>]

-----Original Message-----
From: Stiffler, Jacob 
Sent: Thursday, September 27, 2018 12:34 PM
To: Radhakrishnan, Mahesh; meta-ti@yoctoproject.org
Subject: Re: [EXTERNAL] [meta-ti] [rocko/master][PATCH 18/30] udma-lld-rtos: Added support for udma-lld on rtos (initial version)



On 9/27/2018 11:22 AM, Mahesh Radhakrishnan wrote:
> Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2@ti.com>
> ---
>   recipes-bsp/udma-lld/udma-lld-rtos_git.bb | 81 +++++++++++++++++++++++++++++++
>   1 file changed, 81 insertions(+)
>   create mode 100644 recipes-bsp/udma-lld/udma-lld-rtos_git.bb
>
> diff --git a/recipes-bsp/udma-lld/udma-lld-rtos_git.bb b/recipes-bsp/udma-lld/udma-lld-rtos_git.bb
> new file mode 100644
> index 0000000..1a68aa9
> --- /dev/null
> +++ b/recipes-bsp/udma-lld/udma-lld-rtos_git.bb
> @@ -0,0 +1,81 @@
> +SUMMARY = "TI RTOS low level driver for UDMA"
> +DESCRIPTION = "TI RTOS low level driver for Universal DMA module "
> +
> +inherit ti-pdk
> +
> +LICENSE = "BSD-3-Clause"
> +LIC_FILES_CHKSUM = "file://udma.h;beginline=1;endline=31;md5=83d177cf3df55c16b27ae4102b6ade9a"
> +
> +COMPATIBLE_MACHINE = "k3"
> +PACKAGE_ARCH = "${MACHINE_ARCH}"
> +
> +UDMA_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/udma-lld.git"
> +UDMA_LLD_GIT_PROTOCOL = "git"
> +UDMA_LLD_GIT_BRANCH = "master"
> +
> +# Below commit ID corresponds to "DEV.UDMA_LLD.01.00.00.00"
> +UDMA_LLD_SRCREV = "745f7d3fa12cca6507821489451ffe0cfad4609e"
> +
> +BRANCH = "${UDMA_LLD_GIT_BRANCH}"
> +SRC_URI = "${UDMA_LLD_GIT_URI};protocol=${UDMA_LLD_GIT_PROTOCOL};branch=${BRANCH}"
> +
> +SRCREV = "${UDMA_LLD_SRCREV}"
> +PV = "01.00.00.00"
> +PR = "r0"
> +
> +DEPENDS_append = " osal-rtos \
> +                   sciclient-rtos \
> +"
> +
> +# Build with make instead of XDC
> +TI_PDK_XDCMAKE = "0"
> +
> +UDMA_PACKAGE_BASE   = "${S}/../udma_base"
> +UDMA_LLD_ROOTPATH = "${UDMA_PACKAGE_BASE}/package/all/pdk_/packages/ti/drv/udma"
> +
> +export PDK_INSTALL_PATH = "${PDK_INSTALL_DIR}/packages"
> +export PDK_UDMA_ROOT_PATH = "${UDMA_PACKAGE_BASE}/package/all/pdk_/packages"
> +
> +LIMSOCS = ""
> +LIMSOCS_am65xx-evm = "am65xx"
> +
> +LIMBOARDS = ""
> +LIMBOARDS_am65xx-evm = "am65xx_evm"

Can these definitions be added to the machine configuration as was done 
for all others?
This would mean, defining as below, correct?
LIMSOCS_k3 = "am65xx"
LIMBOARDS_k3 = "am65xx_evm"
BOARD_PACKAGE_k3 = "am65xx_evm"


> +
> +BOARD_PACKAGE = ""
> +BOARD_PACKAGE_am65xx-evm = "am65xx_evm"
> +
> +# HTML doc link params
> +PDK_COMP_LINK_TEXT = "UDMA LLD"
> +
> +do_configure() {
> +
> +   # remove any previous package
> +    rm -rf ${UDMA_PACKAGE_BASE}
> +
> +    cd ${S}
> +
> +    # make the release package before building it
> +    make package BOARD=${BOARD_PACKAGE} DEST_ROOT=${UDMA_PACKAGE_BASE} PDK_UDMA_COMP_PATH=${S}
> +}
> +
> +do_compile() {
> +
> +    cd ${UDMA_LLD_ROOTPATH}
> +
> +    # Build am65xx libraries
> +    make clean lib xdc_meta doxygen LIMIT_SOCS="${LIMSOCS}" LIMIT_BOARDS="${LIMBOARDS}"
> +
> +    #archive
> +    tar -cf udma_lld.tar --exclude='*.tar' ./*
> +}
> +
> +do_install() {
> +    cd ${UDMA_LLD_ROOTPATH}
> +    install -d ${D}${PDK_INSTALL_DIR_RECIPE}/packages/ti/drv/udma
> +    find -name "*.tar" -exec tar xf {} --no-same-owner -C ${D}${PDK_INSTALL_DIR_RECIPE}/packages/ti/drv/udma \;
> +}
> +
> +FILES_${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages"
> +
> +INSANE_SKIP_${PN} = "arch ldflags"