* [PATCH 1/2] Bluetooth: btrtl: rename USB fw for RTL8761
@ 2021-05-28 15:26 Joakim Tjernlund
2021-05-28 15:26 ` [PATCH 2/2] Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device Joakim Tjernlund
` (3 more replies)
0 siblings, 4 replies; 9+ messages in thread
From: Joakim Tjernlund @ 2021-05-28 15:26 UTC (permalink / raw)
To: linux-bluetooth, stable; +Cc: Joakim Tjernlund
From: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
According Realteks own BT drivers firmware RTL8761B is for UART
and RTL8761BU is for USB.
Change existing 8761B to UART and add an 8761BU entry for USB
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
---
drivers/bluetooth/btrtl.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index e7fe5fb22753..ccef8b2cfee2 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -132,12 +132,19 @@ static const struct id_table ic_id_table[] = {
.cfg_name = "rtl_bt/rtl8761a_config" },
/* 8761B */
- { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
+ { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_UART),
.config_needed = false,
.has_rom_version = true,
.fw_name = "rtl_bt/rtl8761b_fw.bin",
.cfg_name = "rtl_bt/rtl8761b_config" },
+ /* 8761BU */
+ { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
+ .config_needed = false,
+ .has_rom_version = true,
+ .fw_name = "rtl_bt/rtl8761bu_fw.bin",
+ .cfg_name = "rtl_bt/rtl8761bu_config" },
+
/* 8822C with UART interface */
{ IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0xa, HCI_UART),
.config_needed = true,
--
2.31.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 2/2] Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device.
2021-05-28 15:26 [PATCH 1/2] Bluetooth: btrtl: rename USB fw for RTL8761 Joakim Tjernlund
@ 2021-05-28 15:26 ` Joakim Tjernlund
2021-05-28 15:40 ` Greg KH
2021-06-02 19:49 ` Marcel Holtmann
2021-05-28 15:40 ` [PATCH 1/2] Bluetooth: btrtl: rename USB fw for RTL8761 Greg KH
` (2 subsequent siblings)
3 siblings, 2 replies; 9+ messages in thread
From: Joakim Tjernlund @ 2021-05-28 15:26 UTC (permalink / raw)
To: linux-bluetooth, stable; +Cc: Joakim Tjernlund
From: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=04 Dev#= 18 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0b05 ProdID=190e Rev= 2.00
S: Manufacturer=Realtek
S: Product=ASUS USB-BT500
S: SerialNumber=xxxxxxxx
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
---
drivers/bluetooth/btusb.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 5d603ef39bad..628f4b22cf69 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -425,6 +425,10 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK },
{ USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK },
+ /* Additional Realtek 8761BU Bluetooth devices */
+ { USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
+
/* Additional Realtek 8821AE Bluetooth devices */
{ USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
{ USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
--
2.31.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH 2/2] Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device.
2021-05-28 15:26 ` [PATCH 2/2] Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device Joakim Tjernlund
@ 2021-05-28 15:40 ` Greg KH
2021-06-02 19:49 ` Marcel Holtmann
1 sibling, 0 replies; 9+ messages in thread
From: Greg KH @ 2021-05-28 15:40 UTC (permalink / raw)
To: Joakim Tjernlund; +Cc: linux-bluetooth, stable
On Fri, May 28, 2021 at 05:26:45PM +0200, Joakim Tjernlund wrote:
> From: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
>
> T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=04 Dev#= 18 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0b05 ProdID=190e Rev= 2.00
> S: Manufacturer=Realtek
> S: Product=ASUS USB-BT500
> S: SerialNumber=xxxxxxxx
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
> ---
> drivers/bluetooth/btusb.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 5d603ef39bad..628f4b22cf69 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -425,6 +425,10 @@ static const struct usb_device_id blacklist_table[] = {
> { USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK },
> { USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK },
>
> + /* Additional Realtek 8761BU Bluetooth devices */
> + { USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK |
> + BTUSB_WIDEBAND_SPEECH },
> +
> /* Additional Realtek 8821AE Bluetooth devices */
> { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
> { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
> --
> 2.31.1
>
<formletter>
This is not the correct way to submit patches for inclusion in the
stable kernel tree. Please read:
https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.
</formletter>
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH 2/2] Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device.
2021-05-28 15:26 ` [PATCH 2/2] Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device Joakim Tjernlund
2021-05-28 15:40 ` Greg KH
@ 2021-06-02 19:49 ` Marcel Holtmann
1 sibling, 0 replies; 9+ messages in thread
From: Marcel Holtmann @ 2021-06-02 19:49 UTC (permalink / raw)
To: Joakim Tjernlund; +Cc: linux-bluetooth, stable
Hi Joakim,
> T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=04 Dev#= 18 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0b05 ProdID=190e Rev= 2.00
> S: Manufacturer=Realtek
> S: Product=ASUS USB-BT500
> S: SerialNumber=xxxxxxxx
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
> ---
> drivers/bluetooth/btusb.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 5d603ef39bad..628f4b22cf69 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -425,6 +425,10 @@ static const struct usb_device_id blacklist_table[] = {
> { USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK },
> { USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK },
>
> + /* Additional Realtek 8761BU Bluetooth devices */
> + { USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK |
> + BTUSB_WIDEBAND_SPEECH },
> +
Applying: Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device.
.git/rebase-apply/patch:15: space before tab in indent.
BTUSB_WIDEBAND_SPEECH },
warning: 1 line adds whitespace errors.
Regards
Marcel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] Bluetooth: btrtl: rename USB fw for RTL8761
2021-05-28 15:26 [PATCH 1/2] Bluetooth: btrtl: rename USB fw for RTL8761 Joakim Tjernlund
2021-05-28 15:26 ` [PATCH 2/2] Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device Joakim Tjernlund
@ 2021-05-28 15:40 ` Greg KH
2021-05-28 16:31 ` [1/2] " bluez.test.bot
2021-06-02 19:50 ` [PATCH 1/2] " Marcel Holtmann
3 siblings, 0 replies; 9+ messages in thread
From: Greg KH @ 2021-05-28 15:40 UTC (permalink / raw)
To: Joakim Tjernlund; +Cc: linux-bluetooth, stable
On Fri, May 28, 2021 at 05:26:44PM +0200, Joakim Tjernlund wrote:
> From: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
>
> According Realteks own BT drivers firmware RTL8761B is for UART
> and RTL8761BU is for USB.
>
> Change existing 8761B to UART and add an 8761BU entry for USB
>
> Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
> ---
> drivers/bluetooth/btrtl.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
> index e7fe5fb22753..ccef8b2cfee2 100644
> --- a/drivers/bluetooth/btrtl.c
> +++ b/drivers/bluetooth/btrtl.c
> @@ -132,12 +132,19 @@ static const struct id_table ic_id_table[] = {
> .cfg_name = "rtl_bt/rtl8761a_config" },
>
> /* 8761B */
> - { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
> + { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_UART),
> .config_needed = false,
> .has_rom_version = true,
> .fw_name = "rtl_bt/rtl8761b_fw.bin",
> .cfg_name = "rtl_bt/rtl8761b_config" },
>
> + /* 8761BU */
> + { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
> + .config_needed = false,
> + .has_rom_version = true,
> + .fw_name = "rtl_bt/rtl8761bu_fw.bin",
> + .cfg_name = "rtl_bt/rtl8761bu_config" },
> +
> /* 8822C with UART interface */
> { IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0xa, HCI_UART),
> .config_needed = true,
> --
> 2.31.1
>
<formletter>
This is not the correct way to submit patches for inclusion in the
stable kernel tree. Please read:
https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.
</formletter>
^ permalink raw reply [flat|nested] 9+ messages in thread* RE: [1/2] Bluetooth: btrtl: rename USB fw for RTL8761
2021-05-28 15:26 [PATCH 1/2] Bluetooth: btrtl: rename USB fw for RTL8761 Joakim Tjernlund
2021-05-28 15:26 ` [PATCH 2/2] Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device Joakim Tjernlund
2021-05-28 15:40 ` [PATCH 1/2] Bluetooth: btrtl: rename USB fw for RTL8761 Greg KH
@ 2021-05-28 16:31 ` bluez.test.bot
2021-06-02 19:50 ` [PATCH 1/2] " Marcel Holtmann
3 siblings, 0 replies; 9+ messages in thread
From: bluez.test.bot @ 2021-05-28 16:31 UTC (permalink / raw)
To: linux-bluetooth, Joakim.Tjernlund
[-- Attachment #1: Type: text/plain, Size: 3675 bytes --]
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=490331
---Test result---
Test Summary:
CheckPatch FAIL 1.07 seconds
GitLint FAIL 0.24 seconds
BuildKernel PASS 672.40 seconds
TestRunner: Setup PASS 437.99 seconds
TestRunner: l2cap-tester PASS 3.25 seconds
TestRunner: bnep-tester PASS 2.24 seconds
TestRunner: mgmt-tester PASS 31.34 seconds
TestRunner: rfcomm-tester PASS 2.43 seconds
TestRunner: sco-tester PASS 2.33 seconds
TestRunner: smp-tester PASS 2.57 seconds
TestRunner: userchan-tester PASS 2.15 seconds
Details
##############################
Test: CheckPatch - FAIL - 1.07 seconds
Run checkpatch.pl script with rule in .checkpatch.conf
Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device.
ERROR: code indent should use tabs where possible
#48: FILE: drivers/bluetooth/btusb.c:437:
+^I ^I^I^I^I^I BTUSB_WIDEBAND_SPEECH },$
WARNING: please, no space before tabs
#48: FILE: drivers/bluetooth/btusb.c:437:
+^I ^I^I^I^I^I BTUSB_WIDEBAND_SPEECH },$
total: 1 errors, 1 warnings, 10 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
NOTE: Whitespace errors detected.
You may wish to use scripts/cleanpatch or scripts/cleanfile
"[PATCH] Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS" has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
##############################
Test: GitLint - FAIL - 0.24 seconds
Run gitlint with rule in .gitlint
Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device.
1: T3 Title has trailing punctuation (.): "Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device."
##############################
Test: BuildKernel - PASS - 672.40 seconds
Build Kernel with minimal configuration supports Bluetooth
##############################
Test: TestRunner: Setup - PASS - 437.99 seconds
Setup environment for running Test Runner
##############################
Test: TestRunner: l2cap-tester - PASS - 3.25 seconds
Run test-runner with l2cap-tester
Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: bnep-tester - PASS - 2.24 seconds
Run test-runner with bnep-tester
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: mgmt-tester - PASS - 31.34 seconds
Run test-runner with mgmt-tester
Total: 433, Passed: 420 (97.0%), Failed: 0, Not Run: 13
##############################
Test: TestRunner: rfcomm-tester - PASS - 2.43 seconds
Run test-runner with rfcomm-tester
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: sco-tester - PASS - 2.33 seconds
Run test-runner with sco-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: smp-tester - PASS - 2.57 seconds
Run test-runner with smp-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: userchan-tester - PASS - 2.15 seconds
Run test-runner with userchan-tester
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0
---
Regards,
Linux Bluetooth
[-- Attachment #2: l2cap-tester.log --]
[-- Type: application/octet-stream, Size: 44349 bytes --]
[-- Attachment #3: bnep-tester.log --]
[-- Type: application/octet-stream, Size: 3555 bytes --]
[-- Attachment #4: mgmt-tester.log --]
[-- Type: application/octet-stream, Size: 568391 bytes --]
[-- Attachment #5: rfcomm-tester.log --]
[-- Type: application/octet-stream, Size: 11676 bytes --]
[-- Attachment #6: sco-tester.log --]
[-- Type: application/octet-stream, Size: 9911 bytes --]
[-- Attachment #7: smp-tester.log --]
[-- Type: application/octet-stream, Size: 11823 bytes --]
[-- Attachment #8: userchan-tester.log --]
[-- Type: application/octet-stream, Size: 5453 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH 1/2] Bluetooth: btrtl: rename USB fw for RTL8761
2021-05-28 15:26 [PATCH 1/2] Bluetooth: btrtl: rename USB fw for RTL8761 Joakim Tjernlund
` (2 preceding siblings ...)
2021-05-28 16:31 ` [1/2] " bluez.test.bot
@ 2021-06-02 19:50 ` Marcel Holtmann
3 siblings, 0 replies; 9+ messages in thread
From: Marcel Holtmann @ 2021-06-02 19:50 UTC (permalink / raw)
To: Joakim Tjernlund; +Cc: linux-bluetooth, stable
Hi Joakim,
> According Realteks own BT drivers firmware RTL8761B is for UART
> and RTL8761BU is for USB.
>
> Change existing 8761B to UART and add an 8761BU entry for USB
>
> Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
> ---
> drivers/bluetooth/btrtl.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
patch has been applied to bluetooth-next tree.
Regards
Marcel
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/2] Bluetooth: btrtl: rename USB fw for RTL8761
@ 2021-05-28 16:46 Joakim Tjernlund
2021-06-02 15:34 ` Joakim Tjernlund
0 siblings, 1 reply; 9+ messages in thread
From: Joakim Tjernlund @ 2021-05-28 16:46 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Joakim Tjernlund, stable
From: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
According Realteks own BT drivers firmware RTL8761B is for UART
and RTL8761BU is for USB.
Change existing 8761B to UART and add an 8761BU entry for USB
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Cc: stable@vger.kernel.org
---
drivers/bluetooth/btrtl.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index e7fe5fb22753..ccef8b2cfee2 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -132,12 +132,19 @@ static const struct id_table ic_id_table[] = {
.cfg_name = "rtl_bt/rtl8761a_config" },
/* 8761B */
- { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
+ { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_UART),
.config_needed = false,
.has_rom_version = true,
.fw_name = "rtl_bt/rtl8761b_fw.bin",
.cfg_name = "rtl_bt/rtl8761b_config" },
+ /* 8761BU */
+ { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
+ .config_needed = false,
+ .has_rom_version = true,
+ .fw_name = "rtl_bt/rtl8761bu_fw.bin",
+ .cfg_name = "rtl_bt/rtl8761bu_config" },
+
/* 8822C with UART interface */
{ IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0xa, HCI_UART),
.config_needed = true,
--
2.31.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH 1/2] Bluetooth: btrtl: rename USB fw for RTL8761
2021-05-28 16:46 Joakim Tjernlund
@ 2021-06-02 15:34 ` Joakim Tjernlund
0 siblings, 0 replies; 9+ messages in thread
From: Joakim Tjernlund @ 2021-06-02 15:34 UTC (permalink / raw)
To: linux-bluetooth; +Cc: stable
Gentle ping ...
On Fri, 2021-05-28 at 18:46 +0200, Joakim Tjernlund wrote:
> From: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
>
> According Realteks own BT drivers firmware RTL8761B is for UART
> and RTL8761BU is for USB.
>
> Change existing 8761B to UART and add an 8761BU entry for USB
>
> Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
> Cc: stable@vger.kernel.org
> ---
> drivers/bluetooth/btrtl.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
> index e7fe5fb22753..ccef8b2cfee2 100644
> --- a/drivers/bluetooth/btrtl.c
> +++ b/drivers/bluetooth/btrtl.c
> @@ -132,12 +132,19 @@ static const struct id_table ic_id_table[] = {
> .cfg_name = "rtl_bt/rtl8761a_config" },
>
>
> /* 8761B */
> - { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
> + { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_UART),
> .config_needed = false,
> .has_rom_version = true,
> .fw_name = "rtl_bt/rtl8761b_fw.bin",
> .cfg_name = "rtl_bt/rtl8761b_config" },
>
>
> + /* 8761BU */
> + { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
> + .config_needed = false,
> + .has_rom_version = true,
> + .fw_name = "rtl_bt/rtl8761bu_fw.bin",
> + .cfg_name = "rtl_bt/rtl8761bu_config" },
> +
> /* 8822C with UART interface */
> { IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0xa, HCI_UART),
> .config_needed = true,
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2021-06-02 19:50 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-28 15:26 [PATCH 1/2] Bluetooth: btrtl: rename USB fw for RTL8761 Joakim Tjernlund
2021-05-28 15:26 ` [PATCH 2/2] Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device Joakim Tjernlund
2021-05-28 15:40 ` Greg KH
2021-06-02 19:49 ` Marcel Holtmann
2021-05-28 15:40 ` [PATCH 1/2] Bluetooth: btrtl: rename USB fw for RTL8761 Greg KH
2021-05-28 16:31 ` [1/2] " bluez.test.bot
2021-06-02 19:50 ` [PATCH 1/2] " Marcel Holtmann
2021-05-28 16:46 Joakim Tjernlund
2021-06-02 15:34 ` Joakim Tjernlund
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.