Re: [PATCH 03/24] leds: dt-bindings: Add LED_FUNCTION definitions

[Jacek Anaszewski <jacek.anaszewski@gmail.com>]

Hi Rob,

Thanks for the review.

On 11/08/2018 04:13 PM, Rob Herring wrote:
> On Tue, Nov 6, 2018 at 4:07 PM Jacek Anaszewski
> <jacek.anaszewski@gmail.com> wrote:
>>
>> Add common LED function definitions for use in Device Tree.
>> The function names were extracted from existing dts files
>> after eliminating oddities.
>>
>> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
>> Cc: Baolin Wang <baolin.wang@linaro.org>
>> Cc: Daniel Mack <daniel@zonque.org>
>> Cc: Dan Murphy <dmurphy@ti.com>
>> Cc: Linus Walleij <linus.walleij@linaro.org>
>> Cc: Oleh Kravchenko <oleg@kaa.org.ua>
>> Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
>> Cc: Simon Shields <simon@lineageos.org>
>> Cc: Xiaotong Lu <xiaotong.lu@spreadtrum.com>
>> ---
>>  include/dt-bindings/leds/functions.h | 101 +++++++++++++++++++++++++++++++++++
>>  1 file changed, 101 insertions(+)
>>  create mode 100644 include/dt-bindings/leds/functions.h
>>
>> diff --git a/include/dt-bindings/leds/functions.h b/include/dt-bindings/leds/functions.h
>> new file mode 100644
>> index 0000000..3f94e09
>> --- /dev/null
>> +++ b/include/dt-bindings/leds/functions.h
>> @@ -0,0 +1,101 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +
>> +#define LED_FUNCTION_2G "2g"
>> +#define LED_FUNCTION_ACTIVITY "activity"
>> +#define LED_FUNCTION_ADSL "adsl"
>> +#define LED_FUNCTION_ALARM "alarm"
>> +#define LED_FUNCTION_ALIVE "alive"
>> +#define LED_FUNCTION_ALL "all"
>> +#define LED_FUNCTION_APP "app"
>> +#define LED_FUNCTION_AUX "aux"
>> +#define LED_FUNCTION_BACKUP "backup"
>> +#define LED_FUNCTION_BACKLIGHT "backlight"
>> +#define LED_FUNCTION_BACKLIGHT_CLUSTER "backlight_cluster"
> 
> I'd prefer we go further and only define 1 endorsed function name.
> Backlight, disk, network, fault/error all seem to have a few

OK, I'll try to remove semantically akin duplicates.

> duplicates. I'm also thinking the functions make linux,default-trigger
> redundant in some cases.

Yes, this is tempting. Needs more thorough analysis, though.

> I'm not a huge fan of making these defines, but it does make it
> perfectly clear if folks use standard names or not.
> 
>> +#define LED_FUNCTION_BEEP "beep"
>> +#define LED_FUNCTION_BLUETOOTH "bluetooth"
>> +#define LED_FUNCTION_BOOT "boot"
>> +#define LED_FUNCTION_BOTTOM "bottom"
>> +#define LED_FUNCTION_BRICK_STATUS "brick-status"
>> +#define LED_FUNCTION_CEL "cel"
>> +#define LED_FUNCTION_CEL_PWR "cel-pwr"
>> +#define LED_FUNCTION_CEL_RESET "cel-reset"
>> +#define LED_FUNCTION_CHRG "chrg"
>> +#define LED_FUNCTION_COM "com"
>> +#define LED_FUNCTION_COPY "copy"
>> +#define LED_FUNCTION_CPU "cpu"
>> +#define LED_FUNCTION_DEBUG "debug"
>> +#define LED_FUNCTION_DIA "dia"
>> +#define LED_FUNCTION_DISK "disk"
>> +#define LED_FUNCTION_DISPLAY_CLUSTER "display_cluster"
>> +#define LED_FUNCTION_DOWN "down"
>> +#define LED_FUNCTION_DSL "dsl"
>> +#define LED_FUNCTION_ENOCEAN "enocean"
>> +#define LED_FUNCTION_ENTER "enter"
>> +#define LED_FUNCTION_ERROR "error"
>> +#define LED_FUNCTION_ESATA "esata"
>> +#define LED_FUNCTION_ETHERNET_STATUS "ethernet-status"
>> +#define LED_FUNCTION_FAIL "fail"
>> +#define LED_FUNCTION_FAULT "fault"
>> +#define LED_FUNCTION_FLASH "flash"
>> +#define LED_FUNCTION_FRONT "front"
>> +#define LED_FUNCTION_FUNC "func"
>> +#define LED_FUNCTION_GPIO "gpio"
>> +#define LED_FUNCTION_GSM "gsm"
>> +#define LED_FUNCTION_HD "hd"
>> +#define LED_FUNCTION_HDD "hdd"
>> +#define LED_FUNCTION_HDDERR "hdderr"
>> +#define LED_FUNCTION_HEALTH "health"
>> +#define LED_FUNCTION_HEARTBEAT "heartbeat"
>> +#define LED_FUNCTION_HOME "home"
>> +#define LED_FUNCTION_INDICATOR "indicator"
>> +#define LED_FUNCTION_INET "inet"
>> +#define LED_FUNCTION_INFO "info"
>> +#define LED_FUNCTION_INTERNET "internet"
>> +#define LED_FUNCTION_KEYPAD "keypad"
>> +#define LED_FUNCTION_LAN "lan"
>> +#define LED_FUNCTION_LEFT "left"
>> +#define LED_FUNCTION_LIVE "live"
>> +#define LED_FUNCTION_MICROSD "microsd"
>> +#define LED_FUNCTION_MISC "misc"
>> +#define LED_FUNCTION_MMC "mmc"
>> +#define LED_FUNCTION_NAND "nand"
>> +#define LED_FUNCTION_NETWORK "network"
>> +#define LED_FUNCTION_ON "on"
>> +#define LED_FUNCTION_OS "os"
>> +#define LED_FUNCTION_PANEL "panel"
>> +#define LED_FUNCTION_PMU_STAT "pmu_stat"
>> +#define LED_FUNCTION_PROG "prog"
>> +#define LED_FUNCTION_PROGRAMMING "programming"
>> +#define LED_FUNCTION_PULSE "pulse"
>> +#define LED_FUNCTION_PWR "pwr"
>> +#define LED_FUNCTION_QSS "qss"
>> +#define LED_FUNCTION_REAR "rear"
>> +#define LED_FUNCTION_REBUILD "rebuild"
>> +#define LED_FUNCTION_RIGHT "right"
>> +#define LED_FUNCTION_ROUTER "router"
>> +#define LED_FUNCTION_RS "rs"
>> +#define LED_FUNCTION_RX "rx"
>> +#define LED_FUNCTION_SATA "sata"
>> +#define LED_FUNCTION_SD "sd"
>> +#define LED_FUNCTION_SLEEP "sleep"
>> +#define LED_FUNCTION_STANDBY "standby"
>> +#define LED_FUNCTION_STATUS "status"
>> +#define LED_FUNCTION_SW "sw"
>> +#define LED_FUNCTION_SWRDY "swrdy"
>> +#define LED_FUNCTION_SYSTEM "system"
>> +#define LED_FUNCTION_TEL "tel"
>> +#define LED_FUNCTION_TOP "top"
>> +#define LED_FUNCTION_TORCH "torch"
>> +#define LED_FUNCTION_TV "tv"
>> +#define LED_FUNCTION_TX "tx"
>> +#define LED_FUNCTION_UP "up"
>> +#define LED_FUNCTION_USB "usb"
>> +#define LED_FUNCTION_USB_COPY "usb_copy"
>> +#define LED_FUNCTION_USER "user"
>> +#define LED_FUNCTION_USR "usr"
>> +#define LED_FUNCTION_WAN "wan"
>> +#define LED_FUNCTION_WIFI "wifi"
>> +#define LED_FUNCTION_WIRELESS "wireless"
>> +#define LED_FUNCTION_WLAN "wlan"
>> +#define LED_FUNCTION_WMODE "wmode"
>> +#define LED_FUNCTION_WPS "wps"
>> --
>> 2.1.4
>>
> 

-- 
Best regards,
Jacek Anaszewski