* dmar pte read access not set error messages on hp dl388 gen8 systems
@ 2019-12-02 6:34 Jerry Snitselaar
2019-12-02 6:41 ` Lu Baolu
0 siblings, 1 reply; 30+ messages in thread
From: Jerry Snitselaar @ 2019-12-02 6:34 UTC (permalink / raw)
To: iommu, Joerg Roedel, Lu Baolu
We are seeing DMAR PTE read access not set errors when booting a
kernel with default passthrough, both with a test kernel and with
a 5.4.0 kernel. Previously we would see a number of identity mappings
being set related to the rmrrs, and now they aren't seen and we get
the dmar pte errors as devices touch those regions. From what I can tell
currently df4f3c603aeb ("iommu/vt-d: Remove static identity map code")
removed the bit of code in init_dmars that used to set up those
mappings:
- /*
- * For each rmrr
- * for each dev attached to rmrr
- * do
- * locate drhd for dev, alloc domain for dev
- * allocate free domain
- * allocate page table entries for rmrr
- * if context not allocated for bus
- * allocate and init context
- * set present in root table for this bus
- * init context with domain, translation etc
- * endfor
- * endfor
- */
- pr_info("Setting RMRR:\n");
- for_each_rmrr_units(rmrr) {
- /* some BIOS lists non-exist devices in DMAR table. */
- for_each_active_dev_scope(rmrr->devices, rmrr->devices_cnt,
- i, dev) {
- ret = iommu_prepare_rmrr_dev(rmrr, dev);
- if (ret)
- pr_err("Mapping reserved region failed\n");
- }
- }
si_domain_init now has code that sets identity maps for devices in rmrrs, but
only for certain devices.
With iommu=nopt, the system boots up without issue.
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-02 6:34 dmar pte read access not set error messages on hp dl388 gen8 systems Jerry Snitselaar
@ 2019-12-02 6:41 ` Lu Baolu
2019-12-02 7:14 ` Jerry Snitselaar
0 siblings, 1 reply; 30+ messages in thread
From: Lu Baolu @ 2019-12-02 6:41 UTC (permalink / raw)
To: Jerry Snitselaar, iommu, Joerg Roedel
Hi,
On 12/2/19 2:34 PM, Jerry Snitselaar wrote:
> We are seeing DMAR PTE read access not set errors when booting a
> kernel with default passthrough, both with a test kernel and with
> a 5.4.0 kernel. Previously we would see a number of identity mappings
> being set related to the rmrrs, and now they aren't seen and we get
> the dmar pte errors as devices touch those regions. From what I can tell
> currently df4f3c603aeb ("iommu/vt-d: Remove static identity map code")
> removed the bit of code in init_dmars that used to set up those
> mappings:
>
> - /*
> - * For each rmrr
> - * for each dev attached to rmrr
> - * do
> - * locate drhd for dev, alloc domain for dev
> - * allocate free domain
> - * allocate page table entries for rmrr
> - * if context not allocated for bus
> - * allocate and init context
> - * set present in root table for this bus
> - * init context with domain, translation etc
> - * endfor
> - * endfor
> - */
> - pr_info("Setting RMRR:\n");
> - for_each_rmrr_units(rmrr) {
> - /* some BIOS lists non-exist devices in DMAR table. */
> - for_each_active_dev_scope(rmrr->devices, rmrr->devices_cnt,
> - i, dev) {
> - ret = iommu_prepare_rmrr_dev(rmrr, dev);
> - if (ret)
> - pr_err("Mapping reserved region failed\n");
> - }
> - }
>
> si_domain_init now has code that sets identity maps for devices in
> rmrrs, but
> only for certain devices.
On which device, are you seeing this error? Is it a rmrr locked device?
Best regards,
baolu
>
> With iommu=nopt, the system boots up without issue.
>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-02 6:41 ` Lu Baolu
@ 2019-12-02 7:14 ` Jerry Snitselaar
2019-12-02 16:13 ` Jerry Snitselaar
0 siblings, 1 reply; 30+ messages in thread
From: Jerry Snitselaar @ 2019-12-02 7:14 UTC (permalink / raw)
To: Lu Baolu; +Cc: iommu
On Mon Dec 02 19, Lu Baolu wrote:
>Hi,
>
>On 12/2/19 2:34 PM, Jerry Snitselaar wrote:
>>We are seeing DMAR PTE read access not set errors when booting a
>>kernel with default passthrough, both with a test kernel and with
>>a 5.4.0 kernel. Previously we would see a number of identity mappings
>>being set related to the rmrrs, and now they aren't seen and we get
>>the dmar pte errors as devices touch those regions. From what I can tell
>>currently df4f3c603aeb ("iommu/vt-d: Remove static identity map code")
>>removed the bit of code in init_dmars that used to set up those
>>mappings:
>>
>>- /*
>>- * For each rmrr
>>- * for each dev attached to rmrr
>>- * do
>>- * locate drhd for dev, alloc domain for dev
>>- * allocate free domain
>>- * allocate page table entries for rmrr
>>- * if context not allocated for bus
>>- * allocate and init context
>>- * set present in root table for this bus
>>- * init context with domain, translation etc
>>- * endfor
>>- * endfor
>>- */
>>- pr_info("Setting RMRR:\n");
>>- for_each_rmrr_units(rmrr) {
>>- /* some BIOS lists non-exist devices in DMAR table. */
>>- for_each_active_dev_scope(rmrr->devices, rmrr->devices_cnt,
>>- i, dev) {
>>- ret = iommu_prepare_rmrr_dev(rmrr, dev);
>>- if (ret)
>>- pr_err("Mapping reserved region failed\n");
>>- }
>>- }
>>
>>si_domain_init now has code that sets identity maps for devices in
>>rmrrs, but
>>only for certain devices.
>
>On which device, are you seeing this error? Is it a rmrr locked device?
>
>Best regards,
>baolu
>
Almost all of the messages are for the ilo, but there also is a message for
the smart array raid bus controller.
>>
>>With iommu=nopt, the system boots up without issue.
>>
>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-02 7:14 ` Jerry Snitselaar
@ 2019-12-02 16:13 ` Jerry Snitselaar
2019-12-03 1:59 ` Lu Baolu
0 siblings, 1 reply; 30+ messages in thread
From: Jerry Snitselaar @ 2019-12-02 16:13 UTC (permalink / raw)
To: Lu Baolu, iommu, Joerg Roedel
On Mon Dec 02 19, Jerry Snitselaar wrote:
>On Mon Dec 02 19, Lu Baolu wrote:
>>Hi,
>>
>>On 12/2/19 2:34 PM, Jerry Snitselaar wrote:
>>>We are seeing DMAR PTE read access not set errors when booting a
>>>kernel with default passthrough, both with a test kernel and with
>>>a 5.4.0 kernel. Previously we would see a number of identity mappings
>>>being set related to the rmrrs, and now they aren't seen and we get
>>>the dmar pte errors as devices touch those regions. From what I can tell
>>>currently df4f3c603aeb ("iommu/vt-d: Remove static identity map code")
>>>removed the bit of code in init_dmars that used to set up those
>>>mappings:
>>>
>>>- /*
>>>- * For each rmrr
>>>- * for each dev attached to rmrr
>>>- * do
>>>- * locate drhd for dev, alloc domain for dev
>>>- * allocate free domain
>>>- * allocate page table entries for rmrr
>>>- * if context not allocated for bus
>>>- * allocate and init context
>>>- * set present in root table for this bus
>>>- * init context with domain, translation etc
>>>- * endfor
>>>- * endfor
>>>- */
>>>- pr_info("Setting RMRR:\n");
>>>- for_each_rmrr_units(rmrr) {
>>>- /* some BIOS lists non-exist devices in DMAR table. */
>>>- for_each_active_dev_scope(rmrr->devices, rmrr->devices_cnt,
>>>- i, dev) {
>>>- ret = iommu_prepare_rmrr_dev(rmrr, dev);
>>>- if (ret)
>>>- pr_err("Mapping reserved region failed\n");
>>>- }
>>>- }
>>>
>>>si_domain_init now has code that sets identity maps for devices in
>>>rmrrs, but
>>>only for certain devices.
>>
>>On which device, are you seeing this error? Is it a rmrr locked device?
>>
>>Best regards,
>>baolu
>>
>
>Almost all of the messages are for the ilo, but there also is a message for
>the smart array raid bus controller.
>
Also seeing it with a dl380 gen9 system, where the raid bus controller
is getting the error.
>>>
>>>With iommu=nopt, the system boots up without issue.
>>>
>>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-02 16:13 ` Jerry Snitselaar
@ 2019-12-03 1:59 ` Lu Baolu
2019-12-03 9:56 ` Jerry Snitselaar
0 siblings, 1 reply; 30+ messages in thread
From: Lu Baolu @ 2019-12-03 1:59 UTC (permalink / raw)
To: Jerry Snitselaar, iommu, Joerg Roedel
Hi,
On 12/3/19 12:13 AM, Jerry Snitselaar wrote:
> On Mon Dec 02 19, Jerry Snitselaar wrote:
>> On Mon Dec 02 19, Lu Baolu wrote:
>>> Hi,
>>>
>>> On 12/2/19 2:34 PM, Jerry Snitselaar wrote:
>>>> We are seeing DMAR PTE read access not set errors when booting a
>>>> kernel with default passthrough, both with a test kernel and with
>>>> a 5.4.0 kernel. Previously we would see a number of identity mappings
>>>> being set related to the rmrrs, and now they aren't seen and we get
>>>> the dmar pte errors as devices touch those regions. From what I can
>>>> tell
>>>> currently df4f3c603aeb ("iommu/vt-d: Remove static identity map code")
>>>> removed the bit of code in init_dmars that used to set up those
>>>> mappings:
>>>>
>>>> - /*
>>>> - * For each rmrr
>>>> - * for each dev attached to rmrr
>>>> - * do
>>>> - * locate drhd for dev, alloc domain for dev
>>>> - * allocate free domain
>>>> - * allocate page table entries for rmrr
>>>> - * if context not allocated for bus
>>>> - * allocate and init context
>>>> - * set present in root table for this bus
>>>> - * init context with domain, translation etc
>>>> - * endfor
>>>> - * endfor
>>>> - */
>>>> - pr_info("Setting RMRR:\n");
>>>> - for_each_rmrr_units(rmrr) {
>>>> - /* some BIOS lists non-exist devices in DMAR table. */
>>>> - for_each_active_dev_scope(rmrr->devices,
>>>> rmrr->devices_cnt,
>>>> - i, dev) {
>>>> - ret = iommu_prepare_rmrr_dev(rmrr, dev);
>>>> - if (ret)
>>>> - pr_err("Mapping reserved region
>>>> failed\n");
>>>> - }
>>>> - }
>>>>
>>>> si_domain_init now has code that sets identity maps for devices in
>>>> rmrrs, but
>>>> only for certain devices.
>>>
>>> On which device, are you seeing this error? Is it a rmrr locked device?
>>>
>>> Best regards,
>>> baolu
>>>
>>
>> Almost all of the messages are for the ilo, but there also is a
>> message for
>> the smart array raid bus controller.
>>
>
> Also seeing it with a dl380 gen9 system, where the raid bus controller
> is getting the error.
Does it help if you remove
if (device_is_rmrr_locked(dev))
continue;
in si_domain_init()?
Best regards,
baolu
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-03 1:59 ` Lu Baolu
@ 2019-12-03 9:56 ` Jerry Snitselaar
2019-12-04 0:17 ` Lu Baolu
0 siblings, 1 reply; 30+ messages in thread
From: Jerry Snitselaar @ 2019-12-03 9:56 UTC (permalink / raw)
To: Lu Baolu; +Cc: iommu
On Tue Dec 03 19, Lu Baolu wrote:
>Hi,
>
>On 12/3/19 12:13 AM, Jerry Snitselaar wrote:
>>On Mon Dec 02 19, Jerry Snitselaar wrote:
>>>On Mon Dec 02 19, Lu Baolu wrote:
>>>>Hi,
>>>>
>>>>On 12/2/19 2:34 PM, Jerry Snitselaar wrote:
>>>>>We are seeing DMAR PTE read access not set errors when booting a
>>>>>kernel with default passthrough, both with a test kernel and with
>>>>>a 5.4.0 kernel. Previously we would see a number of identity mappings
>>>>>being set related to the rmrrs, and now they aren't seen and we get
>>>>>the dmar pte errors as devices touch those regions. From what
>>>>>I can tell
>>>>>currently df4f3c603aeb ("iommu/vt-d: Remove static identity map code")
>>>>>removed the bit of code in init_dmars that used to set up those
>>>>>mappings:
>>>>>
>>>>>- /*
>>>>>- * For each rmrr
>>>>>- * for each dev attached to rmrr
>>>>>- * do
>>>>>- * locate drhd for dev, alloc domain for dev
>>>>>- * allocate free domain
>>>>>- * allocate page table entries for rmrr
>>>>>- * if context not allocated for bus
>>>>>- * allocate and init context
>>>>>- * set present in root table for this bus
>>>>>- * init context with domain, translation etc
>>>>>- * endfor
>>>>>- * endfor
>>>>>- */
>>>>>- pr_info("Setting RMRR:\n");
>>>>>- for_each_rmrr_units(rmrr) {
>>>>>- /* some BIOS lists non-exist devices in DMAR table. */
>>>>>- for_each_active_dev_scope(rmrr->devices,
>>>>>rmrr->devices_cnt,
>>>>>- i, dev) {
>>>>>- ret = iommu_prepare_rmrr_dev(rmrr, dev);
>>>>>- if (ret)
>>>>>- pr_err("Mapping reserved
>>>>>region failed\n");
>>>>>- }
>>>>>- }
>>>>>
>>>>>si_domain_init now has code that sets identity maps for
>>>>>devices in rmrrs, but
>>>>>only for certain devices.
>>>>
>>>>On which device, are you seeing this error? Is it a rmrr locked device?
>>>>
>>>>Best regards,
>>>>baolu
>>>>
>>>
>>>Almost all of the messages are for the ilo, but there also is a
>>>message for
>>>the smart array raid bus controller.
>>>
>>
>>Also seeing it with a dl380 gen9 system, where the raid bus controller
>>is getting the error.
>
>Does it help if you remove
>
> if (device_is_rmrr_locked(dev))
> continue;
>
>in si_domain_init()?
>
Unfortunately it still spits out a bunch of error messages.
>Best regards,
>baolu
>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-03 9:56 ` Jerry Snitselaar
@ 2019-12-04 0:17 ` Lu Baolu
2019-12-04 20:53 ` Jerry Snitselaar
0 siblings, 1 reply; 30+ messages in thread
From: Lu Baolu @ 2019-12-04 0:17 UTC (permalink / raw)
To: Jerry Snitselaar; +Cc: iommu
Hi,
On 12/3/19 5:56 PM, Jerry Snitselaar wrote:
> On Tue Dec 03 19, Lu Baolu wrote:
>> Hi,
>>
>> On 12/3/19 12:13 AM, Jerry Snitselaar wrote:
>>> On Mon Dec 02 19, Jerry Snitselaar wrote:
>>>> On Mon Dec 02 19, Lu Baolu wrote:
>>>>> Hi,
>>>>>
>>>>> On 12/2/19 2:34 PM, Jerry Snitselaar wrote:
>>>>>> We are seeing DMAR PTE read access not set errors when booting a
>>>>>> kernel with default passthrough, both with a test kernel and with
>>>>>> a 5.4.0 kernel. Previously we would see a number of identity mappings
>>>>>> being set related to the rmrrs, and now they aren't seen and we get
>>>>>> the dmar pte errors as devices touch those regions. From what I
>>>>>> can tell
>>>>>> currently df4f3c603aeb ("iommu/vt-d: Remove static identity map
>>>>>> code")
>>>>>> removed the bit of code in init_dmars that used to set up those
>>>>>> mappings:
>>>>>>
>>>>>> - /*
>>>>>> - * For each rmrr
>>>>>> - * for each dev attached to rmrr
>>>>>> - * do
>>>>>> - * locate drhd for dev, alloc domain for dev
>>>>>> - * allocate free domain
>>>>>> - * allocate page table entries for rmrr
>>>>>> - * if context not allocated for bus
>>>>>> - * allocate and init context
>>>>>> - * set present in root table for this bus
>>>>>> - * init context with domain, translation etc
>>>>>> - * endfor
>>>>>> - * endfor
>>>>>> - */
>>>>>> - pr_info("Setting RMRR:\n");
>>>>>> - for_each_rmrr_units(rmrr) {
>>>>>> - /* some BIOS lists non-exist devices in DMAR
>>>>>> table. */
>>>>>> - for_each_active_dev_scope(rmrr->devices,
>>>>>> rmrr->devices_cnt,
>>>>>> - i, dev) {
>>>>>> - ret = iommu_prepare_rmrr_dev(rmrr, dev);
>>>>>> - if (ret)
>>>>>> - pr_err("Mapping reserved region
>>>>>> failed\n");
>>>>>> - }
>>>>>> - }
>>>>>>
>>>>>> si_domain_init now has code that sets identity maps for devices in
>>>>>> rmrrs, but
>>>>>> only for certain devices.
>>>>>
>>>>> On which device, are you seeing this error? Is it a rmrr locked
>>>>> device?
>>>>>
>>>>> Best regards,
>>>>> baolu
>>>>>
>>>>
>>>> Almost all of the messages are for the ilo, but there also is a
>>>> message for
>>>> the smart array raid bus controller.
>>>>
>>>
>>> Also seeing it with a dl380 gen9 system, where the raid bus controller
>>> is getting the error.
>>
>> Does it help if you remove
>>
>> if (device_is_rmrr_locked(dev))
>> continue;
>>
>> in si_domain_init()?
>>
>
> Unfortunately it still spits out a bunch of error messages.
Can you please show me the whole dmesg?
Best regards,
-baolu
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-04 0:17 ` Lu Baolu
@ 2019-12-04 20:53 ` Jerry Snitselaar
2019-12-05 1:39 ` Lu Baolu
0 siblings, 1 reply; 30+ messages in thread
From: Jerry Snitselaar @ 2019-12-04 20:53 UTC (permalink / raw)
To: Lu Baolu; +Cc: iommu
[-- Attachment #1: Type: text/plain, Size: 3467 bytes --]
On Wed Dec 04 19, Lu Baolu wrote:
>Hi,
>
>On 12/3/19 5:56 PM, Jerry Snitselaar wrote:
>>On Tue Dec 03 19, Lu Baolu wrote:
>>>Hi,
>>>
>>>On 12/3/19 12:13 AM, Jerry Snitselaar wrote:
>>>>On Mon Dec 02 19, Jerry Snitselaar wrote:
>>>>>On Mon Dec 02 19, Lu Baolu wrote:
>>>>>>Hi,
>>>>>>
>>>>>>On 12/2/19 2:34 PM, Jerry Snitselaar wrote:
>>>>>>>We are seeing DMAR PTE read access not set errors when booting a
>>>>>>>kernel with default passthrough, both with a test kernel and with
>>>>>>>a 5.4.0 kernel. Previously we would see a number of identity mappings
>>>>>>>being set related to the rmrrs, and now they aren't seen and we get
>>>>>>>the dmar pte errors as devices touch those regions. From
>>>>>>>what I can tell
>>>>>>>currently df4f3c603aeb ("iommu/vt-d: Remove static
>>>>>>>identity map code")
>>>>>>>removed the bit of code in init_dmars that used to set up those
>>>>>>>mappings:
>>>>>>>
>>>>>>>- /*
>>>>>>>- * For each rmrr
>>>>>>>- * for each dev attached to rmrr
>>>>>>>- * do
>>>>>>>- * locate drhd for dev, alloc domain for dev
>>>>>>>- * allocate free domain
>>>>>>>- * allocate page table entries for rmrr
>>>>>>>- * if context not allocated for bus
>>>>>>>- * allocate and init context
>>>>>>>- * set present in root table for this bus
>>>>>>>- * init context with domain, translation etc
>>>>>>>- * endfor
>>>>>>>- * endfor
>>>>>>>- */
>>>>>>>- pr_info("Setting RMRR:\n");
>>>>>>>- for_each_rmrr_units(rmrr) {
>>>>>>>- /* some BIOS lists non-exist devices in
>>>>>>>DMAR table. */
>>>>>>>- for_each_active_dev_scope(rmrr->devices,
>>>>>>>rmrr->devices_cnt,
>>>>>>>- i, dev) {
>>>>>>>- ret = iommu_prepare_rmrr_dev(rmrr, dev);
>>>>>>>- if (ret)
>>>>>>>- pr_err("Mapping reserved
>>>>>>>region failed\n");
>>>>>>>- }
>>>>>>>- }
>>>>>>>
>>>>>>>si_domain_init now has code that sets identity maps for
>>>>>>>devices in rmrrs, but
>>>>>>>only for certain devices.
>>>>>>
>>>>>>On which device, are you seeing this error? Is it a rmrr
>>>>>>locked device?
>>>>>>
>>>>>>Best regards,
>>>>>>baolu
>>>>>>
>>>>>
>>>>>Almost all of the messages are for the ilo, but there also is
>>>>>a message for
>>>>>the smart array raid bus controller.
>>>>>
>>>>
>>>>Also seeing it with a dl380 gen9 system, where the raid bus controller
>>>>is getting the error.
>>>
>>>Does it help if you remove
>>>
>>> if (device_is_rmrr_locked(dev))
>>> continue;
>>>
>>>in si_domain_init()?
>>>
>>
>>Unfortunately it still spits out a bunch of error messages.
>
>Can you please show me the whole dmesg?
>
>Best regards,
>-baolu
>
Attaching console output (can't get to a point to actually log in) and
config that is used to build that kernel.
[-- Attachment #2: dl388-console --]
[-- Type: text/plain, Size: 105112 bytes --]
[ 0.000000] Linux version 5.4.0-1.elrdy.x86_64 (mockbuild@x86-vm-08.build.eng.bos.redhat.com) (gcc version 8.2.1 20180905 (Red Hat 8.2.1-3) (GCC)) #1 SMP Tue Nov 26 20:14:26 UTC 2019
[ 0.000000] Command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.4.0-1.elrdy.x86_64 root=/dev/mapper/rhel_hp--dl388g8--07-root ro intel_iommu=on ksdevice=bootif crashkernel=auto resume=/dev/mapper/rhel_hp--dl388g8--07-swap rd.lvm.lv=rhel_hp-dl388g8-07/root rd.lvm.lv=rhel_hp-dl388g8-07/swap console=ttyS1,115200n81
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bddabfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bddac000-0x00000000bddddfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bddde000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000c3fffefff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: HP ProLiant DL388p Gen8, BIOS P70 07/01/2015
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2294.447 MHz processor
[ 0.001492] last_pfn = 0xc3ffff max_arch_pfn = 0x400000000
[ 0.001826] x86/PAT: Configuron [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002255] last_pfn = 0xbddac max_arch_pfn = 0x400000000
[ 0.007931] found SMP MP-table at [mem 0x000f4f80-0x000f4f8f]
[ 0.008003] Using GB pages for direct mapping
[ 0.008308] RAMDISK: [mem 0x349fc000-0x364f5fff]
[ 0.008312] ACPI: Early table checksum verification disabled
[ 0.008316] ACPI: RSDP 0x00000000000F4F00 000024 (v02 HP )
[ 0.008320] ACPI: XSDT 0x00000000BDDAED00 0000EC (v01 HP ProLiant 00000002 �? 0000162E)
[ 0.008325] ACPI: FACP 0x00000000BDDAEE40 0000F4 (v03 HP ProLiant 00000002 �? 0000162E)
[ 0.008329] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20190816/tbfadt-674)
[ 0.008332] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20190816/tbfadt-674)
[ 0.008335] ACPI: DSDT 0x00000000BDDAEF40 0026DC (v01 HP DSDT 00000001 INTL 20030228)
[ 0.008338] ACPI: FACS 0x00000000BDDAC140 000040
[ 0.008340] ACPI: FACS 0x00000000BDDAC140 000040
[ 0.008343] ACPI: SPCR 0x00000000BDDAC180 000050 (v01 HP S 0000162E)
[ 0.008346] ACPI: MCFG 0x00000000BDDAC200 00003C (v01 HP ProLiant 00000001 00000000)
[ 0.008348] ACPI: HPET 0x00000000BDDAC240 000038 (v01 HP ProLiant 00000002 �? 0000162E)
[ 0.008351] ACPI: FFFF 0x00000000BDDAC280 000064 (v02 HP ProLiant 00000002 �? 0000162E)
[ 0.008354] ACPI: SPMI 0x00000000BDDAC300 000040 (v05 HP ProLiant 00000001 �? 0000162E)
[ 0.008357] ACPI: ERST 0x00000000BDDAC340 000230 (v01 HP ProLiant 00000001 �? 0000162E)
[ 0.008360] ACPI: APIC 0x00000000BDDAC580 00026A (v01 HP ProLiant 00000002 00000000)
[ 0.008363] ACPI: SRAT 0x00000000BDDAC800 000750 (v01 HP Proliant 00000001 �? 0000162E)
[ 0.008366] ACPI: FFFF 0x00000000BDDACF80 000176 (v01 HP ProLiant 00000001 �? 0000162E)
[ 0.008369] ACPI: BERT 0x00000000BDDAD100 000030 (v01 HP ProLiant 00000001 �? 0000162E)
[ 0.008371] ACPI: HEST 0x00000000BDDAD140 0000BC (v01 HP ProLiant 00000001 �? 0000162E)
[ 0.008374] ACPI: DMAR 0x00000000BDDAD200 000720 (v01 HP ProLiant 00000001 �? 0000162E)
[ 0.008377] ACPI: FFFF 0x00000000BDDAEC40 000030 (v01 HP ProLiant 00000001 00000000)
[ 0.008380] ACPI: PCCT 0x00000000BDDAEC80 00006E (v01 HP Proliant 00000001 PH 0000504D)
[ 0.008383] ACPI: SSDT 0x00000000BDDB1640 0007EA (v01 HP DEV_PCI1 00000001 INTL 20120503)
[ 0.008386] ACPI:B1E40 000103 (v03 HP CRSPCI0 00000002 HP 00000001)
[ 0.008389] ACPI: SSDT 0x00000000BDDB1F80 000098 (v03 HP CRSPCI1 00000002 HP 00000001)
[ 0.008392] ACPI: SSDT 0x00000000BDDB2040 00038A (v02 HP riser0 00000002 INTL 20030228)
[ 0.008395] ACPI: SSDT 0x00000000BDDB2400 000536 (v03 HP riser1a 00000002 INTL 20030228)
[ 0.008398] ACPI: SSDT 0x00000000BDDB2940 000537 (v03 HP riser2a 00000002 INTL 20030228)
[ 0.008400] ACPI: SSDT 0x00000000BDDB2E80 000BB9 (v01 HP pcc 00000001 INTL 20120503)
[ 0.008403] ACPI: SSDT 0x00000000BDDB3A40 000377 (v01 HP pmab 00000001 INTL 20120503)
[ 0.008406] ACPI: SSDT 0x00000000BDDB3DC0 005524 (v01 HP pcc2 00000001 INTL 20120503)
[ 0.008409] ACPI: SSDT 0x00000000BDDB9300 003AEC (v01 INTEL PPM RCM 00000001 INTL 20061109)
[ 0.008444] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.008445] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.008446] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.008447] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.008448] SRAT: PXM 0 -> APIC 0x04 0.008448] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.008449] SRAT: PXM 0 -> APIC 0x06 -> Node 0
[ 0.008450] SRAT: PXM 0 -> APIC 0x07 -> Node 0
[ 0.008451] SRAT: PXM 0 -> APIC 0x08 -> Node 0
[ 0.008452] SRAT: PXM 0 -> APIC 0x09 -> Node 0
[ 0.008452] SRAT: PXM 0 -> APIC 0x0a -> Node 0
[ 0.008453] S PXM 0 -> APIC 0x0b -> Node 0
[ 0.008454] SRAT: PXM 1 -> APIC 0x20 -> Node 1
[ 0.008455] SRAT: PXM 1 -> APIC 0x21 -> Node 1
[ 0.008456] SRAT: PXM 1 -> APIC 0x22 -> Node 1
[ 0.008456] SRAT: PXM 1 -> APIC 0x23 -> Node 1
[ 0.008457] SRAT: PXM 1 -> APIC 0x24 -> Node 1
[ 0.008458] SRAT: PXM 1 -> APIC 0x25 -> Node 1
[ 0.008459] SRAT: PXM 1 -> APIC 0x26 -> Node 1
[ 0.008460] SRAT: PXM 1 -> APIC 0x27 -> Node 1
[ 0.008460] SRAT: PXM 1 -> APIC 0x28 -> Node 1
[ 0.008461] SRAT: PXM 1 -> APIC 0x29 -> Node 1
[ 0.008462] SRAT: PXM 1 -> APIC 0x2a -> Node 1
[ 0.008463] SRAT: PXM 1 -> APIC 0x2b -> Node 1
[ 0.008467] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x83fffffff]
[ 0.008469] ACPI: SRAT: Node 1 PXM 1 [mem 0x840000000-0xc3fffffff]
[ 0.008482] NODE_DATA(0) allocated [mem 0x83ffd6000-0x83fffffff]
[ 0.008511] NODE_DATA(1) allocated [mem 0xc3ffd5000-0xc3fffefff]
[ 0.008717] Using crashkernel=auto, the size chosen is a best effort estimation.
[ 0.008720] Reserving 160MB of memory at 2864MB for crashkernel (System RAM: 49117MB)
[ 0.008779] Zone rang8780] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008781] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.008782] Normal [mem 0x0000000100000000-0x0000000c3fffefff]
[ 0.008783] Device empty
[ 0.008784] Movable zone start for each node
[ 0.008788] Early memory node ranges
[ 0.008789] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.008790] node 0: [mem 0x0000000000100000-0x00000000bddabfff]
[ 0.008791] node 0: [mem 0x0000000100000000-0x000000083fffffff]
[ 0.008795] node 1: [mem 0x0000000840000000-0x0000000c3fffefff]
[ 0.008945] Zeroed struct page in unavailable ranges: 8889 pages
[ 0.008947] Initmem setup node 0 [mem 0x0000000000001000-0x000000083fffffff]
[ 0.028213] Initmem setup node 1 [mem 0x0000000840000000-0x0000000c3fffefff]
[ 0.029426] ACPI: PM-Timer IO Port: 0x908
[ 0.029439] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.029451] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.029455] IOAPIC[1]: apic_id 0, version 32, address 0xfec10000, GSI 24-47
[ 0.029459] IOAPIC[2]: apic_id 10, version 32, address 0xfec40000, GSI 48-71
[ 0.029462] ACPI: INT_SRC_OVR (bus 0 bus_irq edge)
[ 0.029464] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.029469] Using ACPI (MADT) for SMP configuration information
[ 0.029471] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.029475] ACPI: SPCR: SPCR table version 1
[ 0.029476] ACPI: SPCR: Unexpected SPCR Access Width. Defaulting to byte size
[ 0.029478] ACPI: SPCR: console: uart,mmio,0x0,9600
[ 0.029481] smpboot: Allowing 64 CPUs, 40 hotplug CPUs
[ 0.029497] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.029499] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.029500] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.029500] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.029501] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.029503] PM: Registered nosave memory: [mem 0xbddac000-0xbddddfff]
[ 0.029504] PM: Registered nosave memory: [mem 0xbddde000-0xcfffffff]
[ 0.029504] PM: Registered nosave memory: [mem 0xd0000000-0xfebfffff]
[ 0.029505] PM: Registered nosave memory: [mem 0xfec00000-0xfee0ffffPM: Registered nosave memory: [mem 0xfee10000-0xff7fffff]
[ 0.029507] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.029509] [mem 0xd0000000-0xfebfffff] available for PCI devices
[ 0.029510] Booting paravirtualized kernel on bare hardware
[ 0.029514] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.029516] Detected CPU family 6 model 45 stepping 7
[ 0.029518] Warning: Intel Processor - this hardware has not undergone testing by Red Hat and might not be certified. Please consult https://hardware.redhat.com for certified hardware.
[ 0.144563] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:2
[ 0.149207] percpu: Embedded 53 pages/cpu s180224 r8192 d28672 u262144
[ 0.149272] Built 2 zonelists, mobility grouping on. Total pages: 12377530
[ 0.149274] Policy zone: Normal
[ 0.149276] Kernel command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.4.0-1.elrdy.x86_64 root=/dev/mapper/rhel_hp--dl388g8--07-root ro intel_iommu=on ksdevice=bootif crashkernel=auto resume=/dev/mapper/rhel_hp--dl388g8--07-swap rd.lvm.lv=rhel_hp-dl388g8-07/root rd.lvm.lv=rhel_hp-dl388g8-07/swap console=ttyS1,115200n81
[ 0.149abled
[ 0.150215] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.188508] Memory: 3115232K/50296088K available (12292K kernel code, 2069K rwdata, 4192K rodata, 2388K init, 6204K bss, 1092768K reserved, 0K cma-reserved)
[ 0.188837] random: get_random_u64 called from cache_random_seq_create+0x7c/0x140 with crng_init=0
[ 0.189039] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=2
[ 0.189067] Kernel/User page tables isolation: enabled
[ 0.189114] ftrace: allocating 37211 entries in 146 pages
[ 0.205224] rcu: Hierarchical RCU implementation.
[ 0.205226] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=64.
[ 0.205227] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.205228] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=64
[ 0.208512] NR_IRQS: 524544, nr_irqs: 1752, preallocated irqs: 16
[ 0.214231] Console: colour VGA+ 80x25
[ 4.054980] printk: console [ttyS1] enabled
[ 4.056422] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[ 4.060179] ACPI: Core revision 201908807] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 4.464766] APIC: Switch to symmetric I/O mode setup
[ 4.466461] DMAR: Host address width 46
[ 4.467747] DMAR: DRHD base: 0x000000fbafe000 flags: 0x0
[ 4.469646] DMAR: dmar0: reg_base_addr fbafe000 ver 1:0 cap d2078c106f0462 ecap f020fe
[ 4.472259] DMAR: DRHD base: 0x000000f4ffe000 flags: 0x1
[ 4.474048] DMAR: dmar1: reg_base_addr f4ffe000 ver 1:0 cap d2078c106f0462 ecap f020fe
[ 4.476678] DMAR: RMRR base: 0x000000bdffd000 end: 0x000000bdffffff
[ 4.478839] DMAR: RMRR base: 0x000000bdff6000 end: 0x000000bdffcfff
[ 4.480929] DMAR: RMRR base: 0x000000bdf83000 end: 0x000000bdf84fff
[ 4.483021] DMAR: RMRR base: 0x000000bdf7f000 end: 0x000000bdf82fff
[ 4.485108] DMAR: RMRR base: 0x000000bdf6f000 end: 0x000000bdf7efff
[ 4.487190] DMAR: RMRR base: 0x000000bdf6e000 end: 0x000000bdf6efff
[ 4.489364] DMAR: RMRR base: 0x000000000f4000 end: 0x000000000f4fff
[ 4.491802] DMAR: RMRR base: 0x000000000e8000 end: 0x000000000e8fff
[ 4.493908] DMAR: RMRR base: 0x000000bddde000 end: 0x000000bdddefff
[ 4.496006] DMAR: ATSR flags: 0x0
[ 4.497119] DMAR-IR: IOAPIC id 10 under DRHD base 0xfbafe000 IOMMU 0
[ 4.499360] DMAR-IR: IOAPIC id 8 under DRHD base 0xf4ffe000 IOMMU 1
[ 4.501477] DMAR-IR: RHD base 0xf4ffe000 IOMMU 1
[ 5.003403] DMAR-IR: HPET id 0 under DRHD base 0xf4ffe000
[ 5.005206] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 5.005206] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 5.010766] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 5.012566] x2apic: IRQ remapping doesn't support X2APIC mode
[ 5.014503] Switched APIC routing to physical flat.
[ 5.016757] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 5.023774] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2112b762dc5, max_idle_ns: 440795270470 ns
[ 5.027299] Calibrating delay loop (skipped), value calculated using timer frequency.. 4588.89 BogoMIPS (lpj=2294447)
[ 5.028298] pid_max: default: 65536 minimum: 512
[ 5.029408] LSM: Security Framework initializing
[ 5.030317] Yama: becoming mindful.
[ 5.031317] SELinux: Initializing.
[ 5.045044] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, vmalloc)
[ 5.051886] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, vmalloc)
[ 5.052555] Mount-cache hash table entrder: 8, 1048576 bytes, vmalloc)
[ 5.053491] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc)
[ 5.054882] mce: CPU0: Thermal monitoring enabled (TM1)
[ 5.055318] process: using mwait in idle threads
[ 5.056300] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 5.057298] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 5.058301] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 5.059299] Spectre V2 : Mitigation: Full generic retpoline
[ 5.060298] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 5.061298] Speculative Store Bypass: Vulnerable
[ 5.062300] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 5.063542] Freeing SMP alternatives memory: 32K
[ 5.065799] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2630 0 @ 2.30GHz (family: 0x6, model: 0x2d, stepping: 0x7)
[ 5.066495] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Broken BIOS detected, complain to your hardware vendor.
[ 5.067299] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
[ 5.068298] Intel PMU driver.
[ 5.069254] ... version: 3
[ 5.069298] ... bit width: 48
[ 5.070298] ... generic registers: 4
.. max period: 00007fffffffffff0000ffffffffffff
[ 5.073298] ... fixed-purpose events: 3
[ 5.074298] ... event mask: 000000070000000f
[ 5.075369] rcu: Hierarchical SRCU implementation.
[ 5.081198] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 5.082350] smp: Bringing up secondary CPUs ...
[ 5.083442] x86: Booting SMP configuration:
[ 5.084301] .... node #0, CPUs: #1 #2 #3 #4 #5
[ 5.095299] .... node #1, CPUs: #6
[ 4.789532] smpboot: CPU 6 Converting physical 0 to logical die 1
[ 5.161533] #7 #8 #9 #10 #11
[ 5.172300] .... node #0, CPUs: #12
[ 5.174555] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 5.176471] #13 #14 #15 #16 #17
[ 5.186301] .... node #1, CPUs: #18 #19 #20 #21 #22 #23
[ 5.198511] smp: Brought up 2 nodes, 24 CPUs
[ 5.200299] smpboot: Max logical packages: 6
[ 5.201300] smpboot: Total of 24 processors activated (110202.88 BogoMIPS)
[ 5.312320] node 1 initialised, 4094148 pages in 108ms
[ 5.455337] node 0 initialised, 7427874 pages in 251ms
[ 5.460037] devtmpfs: initialized
[ 5.460405] x86/mm: Memory block size: 128MB
[ 5.479552] clocksource: jiffies: mask: 0ffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 5.582402] futex hash table entries: 16384 (order: 8, 1048576 bytes, vmalloc)
[ 5.586012] pinctrl core: initialized pinctrl subsystem
[ 5.587885] NET: Registered protocol family 16
[ 5.589620] audit: initializing netlink subsys (disabled)
[ 5.591341] audit: type=2000 audit(1575474035.594:1): state=initialized audit_enabled=0 res=1
[ 5.594307] cpuidle: using governor menu
[ 5.596341] Detected 1 PCC Subspaces
[ 5.597400] Registering PCC driver as Mailbox controller
[ 5.599546] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 5.602302] ACPI: bus type PCI registered
[ 5.603301] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 5.606551] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ 5.609306] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[ 5.611329] PCI: Using configuration type 1 for base access
[ 5.613406] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 5.628303] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 5.633433] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 5.636305] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 5.734389] cryptd: max_cpu_qlen set to 1000
[ 5.755535] ACPI: Added _OSI(Module Device)
[ 5.757304] ACPI: Added _OSI(Processor Device)
[ 5.758300] ACPI: Added _OSI(3.0 _SCP Extension5.872309] ACPI: Added _OSI(Processor Aggregator Device)
[ 6.061308] ACPI: Added _OSI(Linux-Dell-Video)
[ 6.062302] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 6.064299] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 6.070883] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 6.075858] ACPI: Interpreter enabled
[ 6.077312] ACPI: (supports S0 S4 S5)
[ 6.078299] ACPI: Using IOAPIC for interrupt routing
[ 6.080318] HEST: Table parsing has been initialized.
[ 6.082300] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 6.091761] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-1f])
[ 6.093304] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 6.097384] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 6.100300] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 6.104300] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 6.107299] acpi PNP0A08:00: _OSC: platform willing to grant []
[ 6.109299] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 6.111479] PCI host bridge to bus 0000:00
[ 6.112301] pci_bus 0000:0source [mem 0xf4000000-0xf7ffffff window]
[ 6.514317] pci_bus 0000:00: root bus resource [io 0x1000-0x7fff window]
[ 6.517304] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 6.519299] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 6.521299] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window]
[ 6.524299] pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb window]
[ 6.526299] pci_bus 0000:00: root bus resource [io 0x03c0-0x03df window]
[ 6.528299] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 6.531299] pci_bus 0000:00: root bus resource [bus 00-1f]
[ 6.532313] pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
[ 6.534384] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 6.537390] pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
[ 6.539394] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 6.541435] pci 0000:00:01.1: [8086:3c03] type 01 class 0x060400
[ 6.543394] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 6.545425] pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
[ 6.547392] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 6.550423] pci 0000:00:02.1: [8086:3c05] type 01 class 0x060400
[ 6.552391] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[ 00:00:02.2: [8086:3c06] type 01 class 0x060400
[ 7.055402] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 7.057555] pci 0000:00:02.3: [8086:3c07] type 01 class 0x060400
[ 7.060430] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 7.062502] pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
[ 7.064360] pci 0000:00:03.0: enabling Extended Tags
[ 7.066373] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 7.068498] pci 0000:00:03.1: [8086:3c09] type 01 class 0x060400
[ 7.070426] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 7.072493] pci 0000:00:03.2: [8086:3c0a] type 01 class 0x060400
[ 7.075428] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[ 7.077491] pci 0000:00:03.3: [8086:3c0b] type 01 class 0x060400
[ 7.079426] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 7.081506] pci 0000:00:04.0: [8086:3c20] type 00 class 0x088000
[ 7.083328] pci 0000:00:04.0: reg 0x10: [mem 0xf6cf0000-0xf6cf3fff 64bit]
[ 7.086512] pci 0000:00:04.1: [8086:3c21] type 00 class 0x088000
[ 7.088325] pci 0000:00:04.1: reg 0x10: [mem 0xf6ce0000-0xf6ce3fff 64bit]
[ 7.090520] pci 0000:00:04.2: [8086:3c22] type 00 class 0x088000
[ 7.093326] peg 0x10: [mem 0xf6cd0000-0xf6cd3fff 64bit]
[ 7.593460] pci 0000:00:04.3: [8086:3c23] type 00 class 0x088000
[ 7.596321] pci 0000:00:04.3: reg 0x10: [mem 0xf6cc0000-0xf6cc3fff 64bit]
[ 7.598445] pci 0000:00:04.4: [8086:3c24] type 00 class 0x088000
[ 7.600319] pci 0000:00:04.4: reg 0x10: [mem 0xf6cb0000-0xf6cb3fff 64bit]
[ 7.603442] pci 0000:00:04.5: [8086:3c25] type 00 class 0x088000
[ 7.605316] pci 0000:00:04.5: reg 0x10: [mem 0xf6ca0000-0xf6ca3fff 64bit]
[ 7.607431] pci 0000:00:04.6: [8086:3c26] type 00 class 0x088000
[ 7.609316] pci 0000:00:04.6: reg 0x10: [mem 0xf6c90000-0xf6c93fff 64bit]
[ 7.612441] pci 0000:00:04.7: [8086:3c27] type 00 class 0x088000
[ 7.614316] pci 0000:00:04.7: reg 0x10: [mem 0xf6c80000-0xf6c83fff 64bit]
[ 7.616429] pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
[ 7.618434] pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
[ 7.620435] pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
[ 7.623312] pci 0000:00:05.4: reg 0x10: [mem 0xf6c70000-0xf6c70fff]
[ 7.625427] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
[ 7.627413] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
[ 7.629436] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
[ 7.631320] pci 0000:00:1a.0: reg 0x10: [mem 0xf6c60000-0xf6c603ff]
[ 7.633383] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 7.635386] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
[ 7.638392] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 7.640325] pci 000abling UPDCR peer decodes
[ 8.040324] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 8.042300] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 8.044416] pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
[ 8.047381] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 8.049316] pci 0000:00:1c.7: Enabling MPC IRBNCE
[ 8.050299] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled
[ 8.053415] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
[ 8.055319] pci 0000:00:1d.0: reg 0x10: [mem 0xf6c50000-0xf6c503ff]
[ 8.057380] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 8.059380] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 8.061409] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
[ 8.063484] pci 0000:00:1f.2: [8086:1d00] type 00 class 0x01018f
[ 8.066315] pci 0000:00:1f.2: reg 0x10: [io 0x4000-0x4007]
[ 8.068306] pci 0000:00:1f.2: reg 0x14: [io 0x4008-0x400b]
[ 8.069305] pci 0000:00:1f.2: reg 0x18: [io 0x4010-0x4017]
[ 8.071305] pci 0000:00:1f.2: reg 0x1c: [io 0x4018-0x401b]
[ 8.073305] pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x402f]
[ 8.075305] pci 0000:00:1f.2: reg 0x24: [io 0x4030-0x403f]
[ 8.077637] pci 0000:00:01.0: PCI bridge to [bus 08]
[ 8.079340] pci 0000:00:01.1: PCI bridge to [bus 14]
[ 8.081386] pci 0000:03:00.0: [14e4:1657] type 00 class 0x020000
[ 8.083318] pci 0000:0[mem 0xf6bf0000-0xf6bfffff 64bit pref]
[ 8.584325] pci 0000:03:00.0: reg 0x18: [mem 0xf6be0000-0xf6beffff 64bit pref]
[ 8.586307] pci 0000:03:00.0: reg 0x20: [mem 0xf6bd0000-0xf6bdffff 64bit pref]
[ 8.589305] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
[ 8.591355] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 8.593409] pci 0000:03:00.1: [14e4:1657] type 00 class 0x020000
[ 8.596318] pci 0000:03:00.1: reg 0x10: [mem 0xf6bc0000-0xf6bcffff 64bit pref]
[ 8.598307] pci 0000:03:00.1: reg 0x18: [mem 0xf6bb0000-0xf6bbffff 64bit pref]
[ 8.601307] pci 0000:03:00.1: reg 0x20: [mem 0xf6ba0000-0xf6baffff 64bit pref]
[ 8.603304] pci 0000:03:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref]
[ 8.605354] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
[ 8.607399] pci 0000:03:00.2: [14e4:1657] type 00 class 0x020000
[ 8.609318] pci 0000:03:00.2: reg 0x10: [mem 0xf6b90000-0xf6b9ffff 64bit pref]
[ 8.612307] pci 0000:03:00.2: reg 0x18: [mem 0xf6b80000-0xf6b8ffff 64bit pref]
[ 8.614307] pci 0000:03:00.2: reg 0x20: [mem 0xf6b70000-0xf6b7ffff 64bit pref]
[ 8.617304] pci 0000:03:00.2: 0000000-0x0003ffff pref]
[ 9.118372] pci 0000:03:00.2: PME# supported from D0 D3hot D3cold
[ 9.120397] pci 0000:03:00.3: [14e4:1657] type 00 class 0x020000
[ 9.122318] pci 0000:03:00.3: reg 0x10: [mem 0xf6b60000-0xf6b6ffff 64bit pref]
[ 9.125308] pci 0000:03:00.3: reg 0x18: [mem 0xf6b50000-0xf6b5ffff 64bit pref]
[ 9.127307] pci 0000:03:00.3: reg 0x20: [mem 0xf6b40000-0xf6b4ffff 64bit pref]
[ 9.129304] pci 0000:03:00.3: reg 0x30: [mem 0x00000000-0x0003ffff pref]
[ 9.132353] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
[ 9.137346] pci 0000:00:02.0: PCI bridge to [bus 03]
[ 9.139306] pci 0000:00:02.0: bridge window [mem 0xf6b00000-0xf6bfffff 64bit pref]
[ 9.141335] pci 0000:00:02.1: PCI bridge to [bus 15]
[ 9.143350] pci 0000:02:00.0: [103c:323b] type 00 class 0x010400
[ 9.145311] pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7dfffff 64bit]
[ 9.147305] pci 0000:02:00.0: reg 0x18: [mem 0xf7cf0000-0xf7cf03ff 64bit]
[ 9.149303] pci 0000:02:00.0: reg 0x20: [io 0x5000-0x50ff]
[ 9.151307] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 9.154302] pci 0000:02:00.0: enabling Extended Tags
[ 9.1553:00.0: PME# supported from D0 D1 D3hot
[ 9.557378] pci 0000:00:02.2: PCI bridge to [bus 02]
[ 9.558301] pci 0000:00:02.2: bridge window [io 0x5000-0x5fff]
[ 9.560300] pci 0000:00:02.2: bridge window [mem 0xf7c00000-0xf7dfffff]
[ 9.563336] pci 0000:00:02.3: PCI bridge to [bus 16]
[ 9.564548] pci 0000:04:00.0: [111d:8018] type 01 class 0x060400
[ 9.567346] pci 0000:04:00.0: enabling Extended Tags
[ 9.568343] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 9.574323] pci 0000:00:03.0: PCI bridge to [bus 04-07]
[ 9.576301] pci 0000:00:03.0: bridge window [io 0x6000-0x7fff]
[ 9.578300] pci 0000:00:03.0: bridge window [mem 0xf7e00000-0xf7ffffff]
[ 9.581344] pci 0000:05:02.0: [111d:8018] type 01 class 0x060400
[ 9.583345] pci 0000:05:02.0: enabling Extended Tags
[ 9.584348] pci 0000:05:02.0: PME# supported from D0 D3hot D3cold
[ 9.587371] pci 0000:05:04.0: [111d:8018] type 01 class 0x060400
[ 9.589345] pci 0000:05:04.0: enabling Extended Tags
[ 9.591348] pci 0000:05:04.0: PME# supported from D0 D3hot D3cold
[ 9.593375] pci 0000:04:00.0: PCI bridge to [bus 05-07]
[ 9.595303] pci 0000:04:00.0: bridge window [io 0x6000-0x7fff]
[ 9.597301] pci 0000:04:00.0: bridge window [mem 0xf7e00000-0xf7ffffff]
[ 9.599347] pci 0000bc] type 00 class 0x020000
[ 10.100341] pci 0000:06:00.0: reg 0x10: [mem 0xf7ee0000-0xf7efffff]
[ 10.102308] pci 0000:06:00.0: reg 0x14: [mem 0xf7ec0000-0xf7edffff]
[ 10.104308] pci 0000:06:00.0: reg 0x18: [io 0x6000-0x601f]
[ 10.106334] pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 10.108377] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 10.110441] pci 0000:06:00.1: [8086:10bc] type 00 class 0x020000
[ 10.113332] pci 0000:06:00.1: reg 0x10: [mem 0xf7ea0000-0xf7ebffff]
[ 10.115312] pci 0000:06:00.1: reg 0x14: [mem 0xf7e80000-0xf7e9ffff]
[ 10.117313] pci 0000:06:00.1: reg 0x18: [io 0x6020-0x603f]
[ 10.119345] pci 0000:06:00.1: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 10.121379] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
[ 10.126325] pci 0000:05:02.0: PCI bridge to [bus 06]
[ 10.128309] pci 0000:05:02.0: bridge window [io 0x6000-0x6fff]
[ 10.130304] pci 0000:05:02.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 10.132381] pci 0000:07:00.0: [8086:10bc] type 00 class 0x020000
[ 10.135330] pci 0000:07:00.0: reg 0x10: [mem 0xf7fe0000-0xf7ffffff]
[ 10.137312] pci 0000:07:00.0: reg 0x14: [mem 0xf7fc0000-0xf7fdffff]
[ 10.139312] pci 0000:0[io 0x7000-0x701f]
[ 10.639354] pci 0000:07:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 10.641360] pci 0000:07:00.0: PME# supported from D0 D3hot
[ 10.643383] pci 0000:07:00.1: [8086:10bc] type 00 class 0x020000
[ 10.645322] pci 0000:07:00.1: reg 0x10: [mem 0xf7fa0000-0xf7fbffff]
[ 10.648308] pci 0000:07:00.1: reg 0x14: [mem 0xf7f80000-0xf7f9ffff]
[ 10.650308] pci 0000:07:00.1: reg 0x18: [io 0x7020-0x703f]
[ 10.652334] pci 0000:07:00.1: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 10.654359] pci 0000:07:00.1: PME# supported from D0 D3hot
[ 10.659323] pci 0000:05:04.0: PCI bridge to [bus 07]
[ 10.660303] pci 0000:05:04.0: bridge window [io 0x7000-0x7fff]
[ 10.662302] pci 0000:05:04.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 10.665357] pci 0000:00:03.1: PCI bridge to [bus 17]
[ 10.666340] pci 0000:00:03.2: PCI bridge to [bus 18]
[ 10.668340] pci 0000:00:03.3: PCI bridge to [bus 19]
[ 10.670351] pci 0000:00:11.0: PCI bridge to [bus 1b]
[ 10.672578] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[ 10.673373] pci 0000:01:00.0: [103c:3306] type 00 class 0x088000
[ 10.676330] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 10.677312] pci 0000:01:00.0: reg 0x14: [mem 0xf7bf0000-0xf7bf01ff]
[ 10.680312] pci 0000:01:00.0: reg 0x18: [io 0x3400-0x34ff]
[ 10.681526] pci 0000:01:00.1: [102b:0533] type 00 class 0x030000
[ 10.684331] pci 0000:01:00.1: reg 0x10: [mem 0xf5000000-0xf5ffffff pref]
[ 10.686312] pci 0000:01:00.1: reg 0x14: [mem 0xf7be0000-0xf7be3fff]
[ 10.6883110.1: reg 0x18: [mem 0xf7000000-0xf77fffff]
[ 11.089433] pci 0000:01:00.2: [103c:3307] type 00 class 0x088000
[ 11.092339] pci 0000:01:00.2: reg 0x10: [io 0x3800-0x38ff]
[ 11.094316] pci 0000:01:00.2: reg 0x14: [mem 0xf6ff0000-0xf6ff00ff]
[ 11.096316] pci 0000:01:00.2: reg 0x18: [mem 0xf6e00000-0xf6efffff]
[ 11.098316] pci 0000:01:00.2: reg 0x1c: [mem 0xf6d80000-0xf6dfffff]
[ 11.100316] pci 0000:01:00.2: reg 0x20: [mem 0xf6d70000-0xf6d77fff]
[ 11.102316] pci 0000:01:00.2: reg 0x24: [mem 0xf6d60000-0xf6d67fff]
[ 11.104317] pci 0000:01:00.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 11.106393] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
[ 11.109420] pci 0000:01:00.4: [103c:3300] type 00 class 0x0c0300
[ 11.111394] pci 0000:01:00.4: reg 0x20: [io 0x3c00-0x3c1f]
[ 11.116331] pci 0000:00:1c.7: PCI bridge to [bus 01]
[ 11.118306] pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
[ 11.120304] pci 0000:00:1c.7: bridge window [mem 0xf6d00000-0xf7bfffff]
[ 11.122306] pci 0000:00:1c.7: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref]
[ 11.125326] pci_bus 0000:1a: extended config space not accessible
[ 11.127373] pci 0000:00:1e.0: PCI bridge to [bus 1a] (subtractive decode)
[ 11.129312] pci 0dge window [mem 0xf4000000-0xf7ffffff window] (subtractive decode)
[ 11.630318] pci 0000:00:1e.0: bridge window [io 0x1000-0x7fff window] (subtractive decode)
[ 11.633299] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 11.636299] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 11.639299] pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff window] (subtractive decode)
[ 11.642299] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb window] (subtractive decode)
[ 11.644299] pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df window] (subtractive decode)
[ 11.647299] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 11.650680] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
[ 11.653341] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
[ 11.655338] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
[ 11.657337] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[ 11.659337] ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
[ 11.661338] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *7 10 11)
[ 11.663337] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled.
[ 11.665337] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled.
[ 11.667320ridge [PCI1] (domain 0000 [bus 20-3f])
[ 12.168327] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 12.171379] acpi PNP0A08:01: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 12.175300] acpi PNP0A08:01: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 12.178299] acpi PNP0A08:01: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 12.181299] acpi PNP0A08:01: _OSC: platform willing to grant []
[ 12.183299] acpi PNP0A08:01: _OSC failed (AE_SUPPORT); disabling ASPM
[ 12.185396] PCI host bridge to bus 0000:20
[ 12.186300] pci_bus 0000:20: root bus resource [mem 0xf8000000-0xfbffffff window]
[ 12.189299] pci_bus 0000:20: root bus resource [io 0x8000-0xffff window]
[ 12.191299] pci_bus 0000:20: root bus resource [bus 20-3f]
[ 12.193312] pci 0000:20:00.0: [8086:3c01] type 01 class 0x060400
[ 12.195392] pci 0000:20:00.0: PME# supported from D0 D3hot D3cold
[ 12.197388] pci 0000:20:01.0: [8086:3c02] type 01 class 0x060400
[ 12.199398] pci 0000:20:01.0: PME# supported from D0 D3hot D3cold
[ 12.201400] pci 0000:20:01.1: [8086:3c03] type 01 class 0x060400
[ 12.203398] pci 0000:20:01.1: PME# supp3hot D3cold
[ 12.604422] pci 0000:20:02.0: [8086:3c04] type 01 class 0x060400
[ 12.607402] pci 0000:20:02.0: PME# supported from D0 D3hot D3cold
[ 12.609400] pci 0000:20:02.1: [8086:3c05] type 01 class 0x060400
[ 12.611398] pci 0000:20:02.1: PME# supported from D0 D3hot D3cold
[ 12.613397] pci 0000:20:02.2: [8086:3c06] type 01 class 0x060400
[ 12.615398] pci 0000:20:02.2: PME# supported from D0 D3hot D3cold
[ 12.617403] pci 0000:20:02.3: [8086:3c07] type 01 class 0x060400
[ 12.620397] pci 0000:20:02.3: PME# supported from D0 D3hot D3cold
[ 12.622401] pci 0000:20:03.0: [8086:3c08] type 01 class 0x060400
[ 12.624344] pci 0000:20:03.0: enabling Extended Tags
[ 12.626354] pci 0000:20:03.0: PME# supported from D0 D3hot D3cold
[ 12.628406] pci 0000:20:03.1: [8086:3c09] type 01 class 0x060400
[ 12.630397] pci 0000:20:03.1: PME# supported from D0 D3hot D3cold
[ 12.632402] pci 0000:20:03.2: [8086:3c0a] type 01 class 0x060400
[ 12.634397] pci 0000:20:03.2: PME# supported from D0 D3hot D3cold
[ 12.636397] pci 0000:20:03.3: [8086:3c0b] type 01 class 0x060400
[ 12.638398] pci 0000:20:03.3: PME# supported from D0 D3hot D3cold
[ 12.641409] pci 0000:20:04.0: [8086:3c20] type 00 class 0x088000
[ 12.643318] pci 0000:20:04.0: reg 0x10: [mem 0xfbbf0000-0xfbbf3fff 64bit]
[ 12.645434] pci 0000:20:04.1: [8086:3c21] type 00 class 0x088000
[ 12.648317] pci 0000:20:04.1: reg 0x10: [mem 0xfbbe0000-0xfbbe3fff 64bit]
[ 12.650426] pci 0000:20:04.2: [8086:3c22] type 00 class 0x088000
[ 12.652317] pci 0000: [mem 0xfbbd0000-0xfbbd3fff 64bit]
[ 13.153441] pci 0000:20:04.3: [8086:3c23] type 00 class 0x088000
[ 13.155318] pci 0000:20:04.3: reg 0x10: [mem 0xfbbc0000-0xfbbc3fff 64bit]
[ 13.158427] pci 0000:20:04.4: [8086:3c24] type 00 class 0x088000
[ 13.160317] pci 0000:20:04.4: reg 0x10: [mem 0xfbbb0000-0xfbbb3fff 64bit]
[ 13.162426] pci 0000:20:04.5: [8086:3c25] type 00 class 0x088000
[ 13.164317] pci 0000:20:04.5: reg 0x10: [mem 0xfbba0000-0xfbba3fff 64bit]
[ 13.166426] pci 0000:20:04.6: [8086:3c26] type 00 class 0x088000
[ 13.169317] pci 0000:20:04.6: reg 0x10: [mem 0xfbb90000-0xfbb93fff 64bit]
[ 13.171425] pci 0000:20:04.7: [8086:3c27] type 00 class 0x088000
[ 13.173317] pci 0000:20:04.7: reg 0x10: [mem 0xfbb80000-0xfbb83fff 64bit]
[ 13.175417] pci 0000:20:05.0: [8086:3c28] type 00 class 0x088000
[ 13.177420] pci 0000:20:05.2: [8086:3c2a] type 00 class 0x088000
[ 13.179416] pci 0000:20:05.4: [8086:3c2c] type 00 class 0x080020
[ 13.182313] pci 0000:20:05.4: reg 0x10: [mem 0xfbb70000-0xfbb70fff]
[ 13.184444] pci 0000:20:00.0: PCI bridge to [bus 31]
[ 13.186354] pci 0000:20:01.0: PCI bridge to [bus 2a]
[ 1:20:01.1: PCI bridge to [bus 2b]
[ 13.688570] pci 0000:20:02.0: PCI bridge to [bus 27]
[ 13.690343] pci 0000:20:02.1: PCI bridge to [bus 2c]
[ 13.691544] pci 0000:24:00.0: [8086:150e] type 00 class 0x020000
[ 13.694316] pci 0000:24:00.0: reg 0x10: [mem 0xfbf80000-0xfbffffff]
[ 13.696317] pci 0000:24:00.0: reg 0x1c: [mem 0xfbf70000-0xfbf73fff]
[ 13.698317] pci 0000:24:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 13.700352] pci 0000:24:00.0: PME# supported from D0 D3hot D3cold
[ 13.702466] pci 0000:24:00.1: [8086:150e] type 00 class 0x020000
[ 13.705316] pci 0000:24:00.1: reg 0x10: [mem 0xfbe80000-0xfbefffff]
[ 13.707316] pci 0000:24:00.1: reg 0x1c: [mem 0xfbe70000-0xfbe73fff]
[ 13.709367] pci 0000:24:00.1: PME# supported from D0 D3hot D3cold
[ 13.711445] pci 0000:24:00.2: [8086:150e] type 00 class 0x020000
[ 13.713315] pci 0000:24:00.2: reg 0x10: [mem 0xfbd80000-0xfbdfffff]
[ 13.715316] pci 0000:24:00.2: reg 0x1c: [mem 0xfbd70000-0xfbd73fff]
[ 13.717367] pci 0000:24:00.2: PME# supported from D0 D3hot D3cold
[ 13.720437] pci 0000:24:00.3: [8086:150e] type 00 class 0x020000
[ 13.722315] pci 0000:24:00.3: reg 0x10: [mem 0xfbc80000-0xfbcfffff]
[ 13.724316] pci 0000:24:00.3: reg 0x1c: [mem 0xfbc70000-0xfb3.964376] pci 0000:24:00.3: PME# supported from D0 D3hot D3cold
[ 14.130329] pci 0000:20:02.2: PCI bridge to [bus 24]
[ 14.132303] pci 0000:20:02.2: bridge window [mem 0xfbc00000-0xfbffffff]
[ 14.135341] pci 0000:20:02.3: PCI bridge to [bus 2d]
[ 14.136539] pci 0000:20:03.0: PCI bridge to [bus 21]
[ 14.138343] pci 0000:20:03.1: PCI bridge to [bus 2e]
[ 14.140340] pci 0000:20:03.2: PCI bridge to [bus 2f]
[ 14.142340] pci 0000:20:03.3: PCI bridge to [bus 30]
[ 14.144618] iommu: Default domain type: Passthrough
[ 14.146357] pci 0000:01:00.1: vgaarb: setting as boot VGA device
[ 14.147297] pci 0000:01:00.1: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 14.151316] pci 0000:01:00.1: vgaarb: bridge control possible
[ 14.153300] vgaarb: loaded
[ 14.154542] SCSI subsystem initialized
[ 14.156350] ACPI: bus type USB registered
[ 14.157332] usbcore: registered new interface driver usbfs
[ 14.159314] usbcore: registered new interface driver hub
[ 14.161455] usbcore: registered new device driver usb
[ 14.163344] pps_core: LinuxPPS API ver. 1 registered
[ 14.165300] pps_core: Software vght 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 14.666321] PTP clock support registered
[ 14.667384] EDAC MC: Ver: 3.0.0
[ 14.669364] PCI: Using ACPI for IRQ routing
[ 14.670649] PCI: Discovered peer bus 1f
[ 14.672324] PCI host bridge to bus 0000:1f
[ 14.673300] pci_bus 0000:1f: root bus resource [io 0x0000-0xffff]
[ 14.675299] pci_bus 0000:1f: root bus resource [mem 0x00000000-0x3fffffffffff]
[ 14.678299] pci_bus 0000:1f: No busn resource found for root bus, will use [bus 1f-ff]
[ 14.680300] pci_bus 0000:1f: busn_res: can not insert [bus 1f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-1f])
[ 14.684308] pci 0000:1f:08.0: [8086:3c80] type 00 class 0x088000
[ 14.686366] pci 0000:1f:08.3: [8086:3c83] type 00 class 0x088000
[ 14.688369] pci 0000:1f:08.4: [8086:3c84] type 00 class 0x088000
[ 14.690378] pci 0000:1f:09.0: [8086:3c90] type 00 class 0x088000
[ 14.693359] pci 0000:1f:09.3: [8086:3c93] type 00 class 0x088000
[ 14.695370] pci 0000:1f:09.4: [8086:3c94] type 00 class 0x088000
[ 14.697377] pci 0000:1f:0a.0: [8086:3cc0] type 00 class 0x088000
[ 14.699345] pci 0000:1f:0a.1: [8086:3cc1] type 00 class 0x088000
[ 14.701353] pci 0000:1f:0a.2: [8086:3cc2] type 00 class 0x088000
[ 14.703344] pci 0000:1f:0a.3: [8086:3cd0] type 00 class 0x088000
[ 14.705352] pci 0000:1f:0b.0: [8086:3ce0] type 00 class 0x088000
[ 000:1f:0b.3: [8086:3ce3] type 00 class 0x088000
[ 15.208346] pci 0000:1f:0c.0: [8086:3ce8] type 00 class 0x088000
[ 15.210404] pci 0000:1f:0c.1: [8086:3ce8] type 00 class 0x088000
[ 15.212395] pci 0000:1f:0c.2: [8086:3ce8] type 00 class 0x088000
[ 15.214388] pci 0000:1f:0c.6: [8086:3cf4] type 00 class 0x088000
[ 15.216393] pci 0000:1f:0c.7: [8086:3cf6] type 00 class 0x088000
[ 15.219384] pci 0000:1f:0d.0: [8086:3ce8] type 00 class 0x088000
[ 15.221392] pci 0000:1f:0d.1: [8086:3ce8] type 00 class 0x088000
[ 15.223385] pci 0000:1f:0d.2: [8086:3ce8] type 00 class 0x088000
[ 15.225397] pci 0000:1f:0d.6: [8086:3cf5] type 00 class 0x088000
[ 15.227386] pci 0000:1f:0e.0: [8086:3ca0] type 00 class 0x088000
[ 15.230404] pci 0000:1f:0e.1: [8086:3c46] type 00 class 0x110100
[ 15.232401] pci 0000:1f:0f.0: [8086:3ca8] type 00 class 0x088000
[ 15.234430] pci 0000:1f:0f.1: [8086:3c71] type 00 class 0x088000
[ 15.236425] pci 0000:1f:0f.2: [8086:3caa] type 00 class 0x088000
[ 15.238415] pci 0000:1f:0f.3: [8086:3cab] type 00 class 0x088000
[ 15.240421] pci 0000:1f:0f.4: [e 00 class 0x088000
[ 15.641382] pci 0000:1f:0f.5: [8086:3cad] type 00 class 0x088000
[ 15.644368] pci 0000:1f:0f.6: [8086:3cae] type 00 class 0x088000
[ 15.646351] pci 0000:1f:10.0: [8086:3cb0] type 00 class 0x088000
[ 15.648371] pci 0000:1f:10.1: [8086:3cb1] type 00 class 0x088000
[ 15.650368] pci 0000:1f:10.2: [8086:3cb2] type 00 class 0x088000
[ 15.652361] pci 0000:1f:10.3: [8086:3cb3] type 00 class 0x088000
[ 15.654368] pci 0000:1f:10.4: [8086:3cb4] type 00 class 0x088000
[ 15.657362] pci 0000:1f:10.5: [8086:3cb5] type 00 class 0x088000
[ 15.659370] pci 0000:1f:10.6: [8086:3cb6] type 00 class 0x088000
[ 15.661368] pci 0000:1f:10.7: [8086:3cb7] type 00 class 0x088000
[ 15.663360] pci 0000:1f:11.0: [8086:3cb8] type 00 class 0x088000
[ 15.665359] pci 0000:1f:13.0: [8086:3ce4] type 00 class 0x088000
[ 15.667345] pci 0000:1f:13.1: [8086:3c43] type 00 class 0x110100
[ 15.669353] pci 0000:1f:13.4: [8086:3ce6] type 00 class 0x110100
[ 15.671343] pci 0000:1f:13.5: [8086:3c44] type 00 class 0x110100
[ 15.673346] pci 0000:1f:13.6: [8086:3c45] type 00 class 0x088000
[ 15.675353] pci_bus 0000:1f: busn_res: [bpdated to 1f
[ 16.177316] pci_bus 0000:1f: busn_res: can not insert [bus 1f] under domain [bus 00-ff] (conflicts with (null) [bus 00-1f])
[ 16.180733] PCI: Discovered peer bus 3f
[ 16.182355] PCI host bridge to bus 0000:3f
[ 16.184303] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
[ 16.186303] pci_bus 0000:3f: root bus resource [mem 0x00000000-0x3fffffffffff]
[ 16.188301] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[ 16.191303] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 20-3f])
[ 16.195317] pci 0000:3f:08.0: [8086:3c80] type 00 class 0x088000
[ 16.197406] pci 0000:3f:08.3: [8086:3c83] type 00 class 0x088000
[ 16.199430] pci 0000:3f:08.4: [8086:3c84] type 00 class 0x088000
[ 16.202437] pci 0000:3f:09.0: [8086:3c90] type 00 class 0x088000
[ 16.204400] pci 0000:3f:09.3: [8086:3c93] type 00 class 0x088000
[ 16.206432] pci 0000:3f:09.4: [8086:3c94] type 00 class 0x088000
[ 16.208425] pci 0000:3f:0a.0: [8086:3cc0] type 00 class 0x088000
[ 16.211398] pci 0000:3f:0a.1: [8086:3cc1] type 00 class 0x088000
[ 16.213386] pci 0000:3f:0a.2: [8086:3cc2] type 00 class 0x088000
[ 16.215396] pci 0000:3f:0a.3: [8086:3cd0] typ0
[ 16.715382] pci 0000:3f:0b.0: [8086:3ce0] type 00 class 0x088000
[ 16.717355] pci 0000:3f:0b.3: [8086:3ce3] type 00 class 0x088000
[ 16.720350] pci 0000:3f:0c.0: [8086:3ce8] type 00 class 0x088000
[ 16.722358] pci 0000:3f:0c.1: [8086:3ce8] type 00 class 0x088000
[ 16.724356] pci 0000:3f:0c.2: [8086:3ce8] type 00 class 0x088000
[ 16.726350] pci 0000:3f:0c.6: [8086:3cf4] type 00 class 0x088000
[ 16.728350] pci 0000:3f:0c.7: [8086:3cf6] type 00 class 0x088000
[ 16.730347] pci 0000:3f:0d.0: [8086:3ce8] type 00 class 0x088000
[ 16.732350] pci 0000:3f:0d.1: [8086:3ce8] type 00 class 0x088000
[ 16.734348] pci 0000:3f:0d.2: [8086:3ce8] type 00 class 0x088000
[ 16.736352] pci 0000:3f:0d.6: [8086:3cf5] type 00 class 0x088000
[ 16.738348] pci 0000:3f:0e.0: [8086:3ca0] type 00 class 0x088000
[ 16.741357] pci 0000:3f:0e.1: [8086:3c46] type 00 class 0x110100
[ 16.743360] pci 0000:3f:0f.0: [8086:3ca8] type 00 class 0x088000
[ 16.745378] pci 0000:3f:0f.1: [8086:3c71] type 00 class 0x088000
[ 16.747377] pci 0000:3f:0f.2: [8086:3caa] type 00 class 0x088000
[ 16.749371] pci 0000:3f:0f.3: [8086:3cab] type 00 class 0x088000
[ 16.751377] pci 0000:3f:0f.4: [8086:3cac] type 00 class 0x088000
[ 0000:3f:0f.5: [8086:3cad] type 00 class 0x088000
[ 17.155385] pci 0000:3f:0f.6: [8086:3cae] type 00 class 0x088000
[ 17.157351] pci 0000:3f:10.0: [8086:3cb0] type 00 class 0x088000
[ 17.159372] pci 0000:3f:10.1: [8086:3cb1] type 00 class 0x088000
[ 17.161371] pci 0000:3f:10.2: [8086:3cb2] type 00 class 0x088000
[ 17.163365] pci 0000:3f:10.3: [8086:3cb3] type 00 class 0x088000
[ 17.165371] pci 0000:3f:10.4: [8086:3cb4] type 00 class 0x088000
[ 17.167366] pci 0000:3f:10.5: [8086:3cb5] type 00 class 0x088000
[ 17.169373] pci 0000:3f:10.6: [8086:3cb6] type 00 class 0x088000
[ 17.171368] pci 0000:3f:10.7: [8086:3cb7] type 00 class 0x088000
[ 17.174363] pci 0000:3f:11.0: [8086:3cb8] type 00 class 0x088000
[ 17.176356] pci 0000:3f:13.0: [8086:3ce4] type 00 class 0x088000
17.206353] pci 0000:3f:13.4: [8086:3ce6] type 00 class 0x1101000
[ 17.281347] pci 0000:3f:13.5: [8086:3c44] type 00 class 0x110100
[ 17.284348] pci 0000:3f:13.6: [8086:3c45] type 00 class 0x088000
[ 17.286353] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[ 17.288300] pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 20-3f])
[ 17.297541] NetLabel: Initializing
[ Label: domain hash size = 128
[ 17.699311] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 17.701324] NetLabel: unlabeled traffic allowed by default
[ 17.703364] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 17.705300] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 17.709376] clocksource: Switched to clocksource tsc-early
[ 17.729217] VFS: Disk quotas dquot_6.6.0
[ 17.730978] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 17.733600] pnp: PnP ACPI init
[ 17.735324] system 00:00: [mem 0xf4ffe000-0xf4ffffff] could not be reserved
[ 17.738116] system 00:01: [io 0x0408-0x040f] has been reserved
[ 17.740343] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 17.742406] system 00:01: [io 0x0310-0x0315] has been reserved
[ 17.744391] system 00:01: [io 0x0316-0x0317] has been reserved
[ 17.746356] system 00:01: [io 0x0700-0x071f] has been reserved
[ 17.748326] system 00:01: [io 0x0880-0x08ff] has been reserved
[ 17.750291] system 00:01: [io 0x0900-0x097f] has been reserved
[ 17.752338] system 00:01: [io 0x0cd4-0x0cd7] has been reserved
[ 17.754449] system 00:01: [io 0x0cd0-0x0cd3] has been reserved
[ 17.756423] system 00:01: [io 0x0f50-0x0f58] has been reserved
[ 17.758447] system 00:01: [io 0x0ca0-0x0ca1] has been reserved
[ 17.760415] system 00:01: [io 0x0ca4-0x0ca5] has been reserved
[ 17.762680] system 00:01: [io 0x02f8-0x02ff] has been reserved
[ 17.764663] system 00:01: [mefffff] has been reserved
[ 18.266896] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 18.269096] system 00:01: [mem 0xfc000000-0xfc000fff] has been reserved
[ 18.271394] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 18.273559] system 00:01: [mem 0xfed30000-0xfed3ffff] has been reserved
[ 18.275722] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 18.277869] system 00:01: [mem 0xff800000-0xffffffff] has been reserved
[ 18.280573] system 00:06: [mem 0xfbafe000-0xfbafffff] could not be reserved
[ 18.282988] pnp: PnP ACPI: found 7 devices
[ 18.286542] thermal_sys: Registered thermal governor 'fair_share'
[ 18.286543] thermal_sys: Registered thermal governor 'step_wise'
[ 18.288701] thermal_sys: Registered thermal governor 'user_space'
[ 18.295364] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 18.300542] pci 0000:00:02.0: BAR 14: assigned [mem 0xf4000000-0xf40fffff]
[ 18.302889] pci 0000:00:01.0: PCI bridge to [bus 08]
[ 18.304546] pci 0000:00:01.1: PCI bridge to [bus 14]
[ 18.306212] pci 0000:03:00.0: BAR 6: assigned [mem 0xf4000000-0xf403ffff pref]
[ 18.308572] pci 0000:03:00.1: BAR 6: assigned [mem 0xf4040000-0xf407ffff pref]
[ 18.311044] pci 0000:03:00.2: BAR 6: assigned [mem 0xf4080000-0xf40bffff pref]
[ 18.313437] pci 0000:03:00.3: BAR 6: assigned [mem 0xf40c0000-0xf40fffff pref]
[ 18.315877] pci 0000:00:02.0: PCI bridge t8.637415] pci 0000:00:02.0: bridge window [mem 0xf4000000-0xf40fffff]
[ 18.819939] pci 0000:00:02.0: bridge window [mem 0xf6b00000-0xf6bfffff 64bit pref]
[ 18.822597] pci 0000:00:02.1: PCI bridge to [bus 15]
[ 18.824274] pci 0000:02:00.0: BAR 6: assigned [mem 0xf7c00000-0xf7c7ffff pref]
[ 18.826642] pci 0000:00:02.2: PCI bridge to [bus 02]
[ 18.828303] pci 0000:00:02.2: bridge window [io 0x5000-0x5fff]
[ 18.830315] pci 0000:00:02.2: bridge window [mem 0xf7c00000-0xf7dfffff]
[ 18.832578] pci 0000:00:02.3: PCI bridge to [bus 16]
[ 18.834202] pci 0000:06:00.0: BAR 6: assigned [mem 0xf7e00000-0xf7e1ffff pref]
[ 18.836586] pci 0000:06:00.1: BAR 6: assigned [mem 0xf7e20000-0xf7e3ffff pref]
[ 18.838980] pci 0000:05:02.0: PCI bridge to [bus 06]
[ 18.840646] pci 0000:05:02.0: bridge window [io 0x6000-0x6fff]
[ 18.842730] pci 0000:05:02.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 18.844977] pci 0000:07:00.0: BAR 6: assigned [mem 0xf7f00000-0xf7f1ffff pref]
[ 18.847335] pci 0000:07:00.1: BAR 6: assigned [mem 0xf7f20000-0xf7f3ffff pref]
[ 18.849731] pci 0000:05:04.0: PCI bridge to [bus 07]
[ 18.851439] pci 0000:05:04.0: bridge window [io 0x7000-0x7fff]
[ 18.853454] pci 0000:05:04.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 18.855722] pci 0000ridge to [bus 05-07]
[ 19.257355] pci 0000:04:00.0: bridge window [io 0x6000-0x7fff]
[ 19.259407] pci 0000:04:00.0: bridge window [mem 0xf7e00000-0xfffff]
[ 19.361806] pci 0000:00:03.0: PCI bridge to [bus 04-07]
[ 19.363575] pci 0000:00:03.0: bridge window [io 0x6000-0x7fff]
[ 19.365617] pci 0000:00:03.0: bridge window [mem 0xf7e00000-0xf7ffffff]
[ 19.367898] pci 0000:00:03.1: PCI bridge to [bus 17]
[ 19.369544] pci 0000:00:03.2: PCI bridge to [bus 18]
[ 19.371306] pci 0000:00:03.3: PCI bridge to [bus 19]
[ 19.373128] pci 0000:00:11.0: PCI bridge to [bus 1b]
[ 19.374804] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[ 19.376468] pci 0000:01:00.2: BAR 6: assigned [mem 0xf6d00000-0xf6d0ffff pref]
[ 19.378869] pci 0000:00:1c.7: PCI bridge to [bus 01]
[ 19.380511] pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
[ 19.382621] pci 0000:00:1c.7: bridge window [mem 0xf6d00000-0xf7bfffff]
[ 19.384886] pci 0000:00:1c.7: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref]
[ 19.387448] pci 0000:00:1e.0: PCI bridge to [bus 1a]
[ 19.389126] pci_bus 0000:00: resource 4 [mem 0xf4000000-0xf7ffffff window]
[ 19.391497] pci_bus 0000:00: resource 5 [io 0x1000-0x7fff window]
[ 19.393702] pci_bus 0000:00: resource 6 [io 0x0000-0x03af window]
[ 19.395793] pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7 window]
[ 19.397855] pci_bus 0000:00: resource 8 [io 0x0dow]
[ 19.799842] pci_bus 0000:00: resource 9 [io 0x03b0-0x03bb window]
[ 19.801989] pci_bus 0000:00: resource 10 [io 0x03c0-0x03df window]
[ 19.804086] pci_bus 0000:00: resource 11 [mem 0x000a0000-0x000bffff window]
[ 19.806402] pci_bus 0000:03: resource 1 [mem 0xf4000000-0xf40fffff]
[ 19.808484] pci_bus 0000:03: resource 2 [mem 0xf6b00000-0xf6bfffff 64bit pref]
[ 19.810973] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 19.812839] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7dfffff]
[ 19.814923] pci_bus 0000:04: resource 0 [io 0x6000-0x7fff]
[ 19.816775] pci_bus 0000:04: resource 1 [mem 0xf7e00000-0xf7ffffff]
[ 19.819253] pci_bus 0000:05: resource 0 [io 0x6000-0x7fff]
[ 19.821204] pci_bus 0000:05: resource 1 [mem 0xf7e00000-0xf7ffffff]
[ 19.823295] pci_bus 0000:06: resource 0 [io 0x6000-0x6fff]
[ 19.825155] pci_bus 0000:06: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 19.827238] pci_bus 0000:07: resource 0 [io 0x7000-0x7fff]
[ 19.829088] pci_bus 0000:07: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 19.831228] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 19.833094] pci_bus 0000:01: resource 1 [mem 0xf6d00000-0xf7bfffff]
[ 19.835160] pci_bus 0000:01: resource 2 [mem 0xf5000000-0xf5ffffff 64bit pref]
[ 19.837544] pci_bus 0000:1a: resource 4 [memffff window]
[ 20.339881] pci_bus 0000:1a: resource 5 [io 0x1000-0x7fff window]
[ 20.342032] pci_bus 0000:1a: resource 6 [io 0x0000-0x03af window]
[ 20.344092] pci_bus 0000:1a: resource 7 [io 0x03e0-0x0cf7 window]
[ 20.346161] pci_bus 0000:1a: resource 8 [io 0x0d00-0x0fff window]
[ 20.348216] pci_bus 0000:1a: resource 9 [io 0x03b0-0x03bb window]
[ 20.350263] pci_bus 0000:1a: resource 10 [io 0x03c0-0x03df window]
[ 20.352441] pci_bus 0000:1a: resource 11 [mem 0x000a0000-0x000bffff window]
[ 20.354789] pci 0000:20:00.0: PCI bridge to [bus 31]
[ 20.356429] pci 0000:20:01.0: PCI bridge to [bus 2a]
[ 20.358097] pci 0000:20:01.1: PCI bridge to [bus 2b]
[ 20.359730] pci 0000:20:02.0: PCI bridge to [bus 27]
[ 20.361478] pci 0000:20:02.1: PCI bridge to [bus 2c]
[ 20.363145] pci 0000:24:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[ 20.365454] pci 0000:24:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[ 20.367913] pci 0000:20:02.2: PCI bridge to [bus 24]
[ 20.369552] pci 0000:20:02.2: bridge window [mem 0xfbc00000-0xfbffffff]
[ 20.371906] pci 0000:20:02.3: PCI bridge to [bus 2d]
[ 20.373547] pci 0000:20:03.0: PCI bridge to [bus 21]
[ 20.375215] pci 0000:20:0 [bus 2e]
[ 20.876705] pci 0000:20:03.2: PCI bridge to [bus 2f]
[ 20.878386] pci 0000:20:03.3: PCI bridge to [bus 30]
[ 20.880085] pci_bus 0000:20: resource 4 [mem 0xf8000000-0xfbffffff window]
[ 20.882435] pci_bus 0000:20: resource 5 [io 0x8000-0xffff window]
[ 20.884509] pci_bus 0000:24: resource 1 [mem 0xfbc00000-0xfbffffff]
[ 20.886649] pci_bus 0000:1f: resource 4 [io 0x0000-0xffff]
[ 20.888533] pci_bus 0000:1f: resource 5 [mem 0x00000000-0x3fffffffffff]
[ 20.890763] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
[ 20.892658] pci_bus 0000:3f: resource 5 [mem 0x00000000-0x3fffffffffff]
[ 20.895045] NET: Registered protocol family 2
[ 20.897388] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, vmalloc)
[ 20.900812] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc)
[ 20.905111] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
[ 20.907840] TCP: Hash tables configured (established 524288 bind 65536)
[ 20.910523] UDP hash table entries: 32768 (order: 8, 1048576 bytes, vmalloc)
[ 20.913415] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, vmalloc)
[ 20.916705] NET: Registered protocol family 1
[ 20.918202] NET: Registfamily 44
[ 21.332516] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x646 took 12525 usecs
[ 21.347493] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x646 took 12122 usecs
[ 21.350087] pci 0000:01:00.1: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 21.353697] PCI: CLS 64 bytes, default 64
[ 21.355187] Trying to unpack rootfs image as initramfs...
[ 21.961948] Freeing initrd memory: 27624K
[ 21.964834] DMAR: dmar0: Using Queued invalidation
[ 21.966527] DMAR: dmar1: Using Queued invalidation
[ 21.969477] pci 0000:00:00.0: Adding to iommu group 0
[ 21.971390] pci 0000:00:01.0: Adding to iommu group 1
[ 21.973173] pci 0000:00:01.1: Adding to iommu group 2
[ 21.974930] pci 0000:00:02.0: Adding to iommu group 3
[ 21.976672] pci 0000:00:02.1: Adding to iommu group 4
[ 21.978446] pci 0000:00:02.2: Adding to iommu group 5
[ 21.980224] pci 0000:00:02.3: Adding to iommu group 6
[ 21.982096] pci 0000:00:03.0: Adding to iommu group 7
[ 21.983868] pci 0000:00:03.1: Adding to iommu group 8
[ 21.985644] pci 0000:00:03.2: Adding to iommu group 9
[ 21.987484] pci 0000:00:03.3: Adding to iommu group 10
[ 21.989830] pci 0000:00:04.0: Adding to iommu group 11
[ 21.991738] pci 0000:00:04.1: Adding to iommu group 11
[ 21.993557] pci 0000:00:04.2: Adding to iommu group 11
[ 21.995360] pci 0000:00:04.3: Adding to iommu group 11
[ 21.997145] pci 0000:00:04.4: Adding to iommu group 11
[ 21.998915] pci 0000:00:04.5: Adding to iommu group 11
[ 22.000694] pci 0000:00:04.6: Adding to iommu group 11
[ 22.002569] pci 0000:00:04.7: Adding to iommu group 11
[ 22.004556] pci 0000:00:05.0: Adding to iommu group 12
[ 22.006388] pci 0000:00:05.2: Adding to iommu group 12
[ 22.008186] pci 0000:00:05.4: Adding to iommu group 12
[ 22.009968] pci 0000:00:11.0: Adding to iommu group 13
[ 22.011815] pci 0000:00:1a.0: Adding to iommu group 14
[ 22.013605] pci 0000:00:1c.0: Adding to iommu group 15
[ 22.015408] pci 0000:00:1c.7: Adding to iommu group 16
[ 22.017216] pci 0000:00:1d.0: Adding to iommu group 17
[ 22.018991] pci 0000:00:1e.0: Adding to iommu group 18
[ 22.021826] pci 0000:00:1e.0: Using iommu dma mapping
[ 22.023783] pci 0000:00:1f.0: Adding to iommu group 19
[ 22.025667] pci 0000:00:1f.2: Adding to iommu group 19
[ 22.028569] pci 0000:00:1f.2: DMAR: Setting identity map- 0xe8fff]
[ 22.331183] pci 0000:00:1f.2: DMAR: Setting identity map [0xf4000 - 0xf4fff]
[ 22.333546] pci 0000:00:1f.2: DMAR: Setting identity map [0xbdf6e000 - 0xbdf6efff]
[ 22.336099] pci 0000:00:1f.2: DMAR: Setting identity map [0xbdf6f000 - 0xbdf7efff]
[ 22.338604] pci 0000:00:1f.2: DMAR: Setting identity map [0xbdf7f000 - 0xbdf82fff]
[ 22.341189] pci 0000:00:1f.2: DMAR: Setting identity map [0xbdf83000 - 0xbdf84fff]
[ 22.343700] pci 0000:00:1f.2: DMAR: Device uses a private dma domain.
[ 22.346001] pci 0000:03:00.0: Adding to iommu group 20
[ 22.348727] pci 0000:03:00.0: Using iommu dma mapping
[ 22.350644] pci 0000:03:00.1: Adding to iommu group 20
[ 22.352833] pci 0000:03:00.2: Adding to iommu group 20
[ 22.354619] pci 0000:03:00.3: Adding to iommu group 20
[ 22.356423] pci 0000:02:00.0: Adding to iommu group 21
[ 22.358999] pci 0000:02:00.0: Using iommu dma mapping
[ 22.360785] pci 0000:04:00.0: Adding to iommu group 22
[ 22.362623] pci 0000:05:02.0: Adding to iommu group 23
[ 22.364412] pci 0000:05:04.0: Adding to iommu group 24
[ 22.366172] pci 0000:06:00.0: Adding to iommu group 23
[ 22.368762] pci 0000:06:00.0: DMAR: Setting identity map [0xe8000 - 0xe8fff]
[ 22.371290] pci 0000:06:00.0: DMAR: Setting identity map [0xf4000 - 0xf4fff]
[ 22.373646] pci 0000:06:00.0: DMAR: Setting ide000 - 0xbdf6efff]
[ 22.876042] pci 0000:06:00.0: DMAR: Setting identity map [0xbdf6f000 - 0xbdf7efff]
[ 22.878572] pci 0000:06:00.0: DMAR: Setting identity map [0xbdf7f000 - 0xbdf82fff]
[ 22.881167] pci 0000:06:00.0: DMAR: Setting identity map [0xbdf83000 - 0xbdf84fff]
[ 22.883729] pci 0000:06:00.0: DMAR: Device uses a private dma domain.
[ 22.885899] pci 0000:06:00.1: Adding to iommu group 23
[ 22.888675] pci 0000:06:00.1: DMAR: Setting identity map [0xe8000 - 0xe8fff]
[ 22.891216] pci 0000:06:00.1: DMAR: Setting identity map [0xf4000 - 0xf4fff]
[ 22.893576] pci 0000:06:00.1: DMAR: Setting identity map [0xbdf6e000 - 0xbdf6efff]
[ 22.896119] pci 0000:06:00.1: DMAR: Setting identity map [0xbdf6f000 - 0xbdf7efff]
[ 22.898620] pci 0000:06:00.1: DMAR: Setting identity map [0xbdf7f000 - 0xbdf82fff]
[ 22.901232] pci 0000:06:00.1: DMAR: Setting identity map [0xbdf83000 - 0xbdf84fff]
[ 22.903736] pci 0000:06:00.1: DMAR: Device uses a private dma domain.
[ 22.905906] pci 0000:07:00.0: Adding to iommu group 24
[ 22.908705] pci 0000:07:00.0: DMAR: Setting identity map [0xe8000 - 0xe8fff]
[ 22.911149] pci 0000:07:00.0: DMAR: Setting identity map [0xf4000 - 0xf4fff]
[ 22.913483] pci 0000:07:00.0: DMAR: Setting identity map [0xbdf6e000 - 0xbdf6efff]
[ 22.9100.0: DMAR: Setting identity map [0xbdf6f000 - 0xbdf7efff]
[ 23.418361] pci 0000:07:00.0: DMAR: Setting identity map [0xbdf7f000 - 0xbdf82fff]
[ 23.420922] pci 0000:07:00.0: DMAR: Setting identity map [0xbdf83000 - 0xbdf84fff]
[ 23.423506] pci 0000:07:00.0: DMAR: Device uses a private dma domain.
[ 23.425680] pci 0000:07:00.1: Adding to iommu group 24
[ 23.428513] pci 0000:07:00.1: DMAR: Setting identity map [0xe8000 - 0xe8fff]
[ 23.430910] pci 0000:07:00.1: DMAR: Setting identity map [0xf4000 - 0xf4fff]
[ 23.433253] pci 0000:07:00.1: DMAR: Setting identity map [0xbdf6e000 - 0xbdf6efff]
[ 23.435794] pci 0000:07:00.1: DMAR: Setting identity map [0xbdf6f000 - 0xbdf7efff]
[ 23.438329] pci 0000:07:00.1: DMAR: Setting identity map [0xbdf7f000 - 0xbdf82fff]
[ 23.440806] pci 0000:07:00.1: DMAR: Setting identity map [0xbdf83000 - 0xbdf84fff]
[ 23.443733] pci 0000:07:00.1: DMAR: Device uses a private dma domain.
[ 23.446201] pci 0000:01:00.0: Adding to iommu group 25
[ 23.448949] pci 0000:01:00.0: Using iommu dma mapping
[ 23.450807] pci 0000:01:00.1: Adding to iommu group 25
[ 23.452666] pci 0000:01:00.1: DMAR: Device uses a private identity domain.
[ 23.455063] pci 0000:01:00.2: Adding to iommu group 25
[ 23.456881] pci 0000:01:00.4: Adding to iommu group 25
[ 23.458693] pci 0000:01:00.4: DMAR: Device uses a private identity domain.
[ 20000:20:00.0: Adding to iommu group 26
[ 23.863235] pci 0000:20:01.0: Adding to iommu group 27
[ 23.864997] pci 0000:20:01.1: Adding to iommu group 28
[ 23.866787] pci 0000:20:02.0: Adding to iommu group 29
[ 23.868564] pci 0000:20:02.1: Adding to iommu group 30
[ 23.870356] pci 0000:20:02.2: Adding to iommu group 31
[ 23.872220] pci 0000:20:02.3: Adding to iommu group 32
[ 23.874108] pci 0000:20:03.0: Adding to iommu group 33
[ 23.875874] pci 0000:20:03.1: Adding to iommu group 34
[ 23.877645] pci 0000:20:03.2: Adding to iommu group 35
[ 23.879420] pci 0000:20:03.3: Adding to iommu group 36
[ 23.881489] pci 0000:20:04.0: Adding to iommu group 37
[ 23.883311] pci 0000:20:04.1: Adding to iommu group 37
[ 23.885099] pci 0000:20:04.2: Adding to iommu group 37
[ 23.886864] pci 0000:20:04.3: Adding to iommu group 37
[ 23.888666] pci 0000:20:04.4: Adding to iommu group 37
[ 23.890448] pci 0000:20:04.5: Adding to iommu group 37
[ 23.892312] pci 0000:20:04.6: Adding to iommu group 37
[ 23.894083] pci 0000:20:04.7: Adding to iommu group 37
[ 23.895908] pci 0000:20:05.0: Adding to iommu group 38
[ 23.897716] pci 0000:20:05.2: Adding to iommu group 38
[ 23.899485] pci 0000:20:05.4: Adding to iommu group 38
0000:24:00.0: Adding to iommu group 39
[ 24.403648] pci 0000:24:00.0: Using iommu dma mapping
[ 24.405409] pci 0000:24:00.1: Adding to iommu group 40
[ 24.407944] pci 0000:24:00.1: Using iommu dma mapping
[ 24.409766] pci 0000:24:00.2: Adding to iommu group 41
[ 24.412328] pci 0000:24:00.2: Using iommu dma mapping
[ 24.414090] pci 0000:24:00.3: Adding to iommu group 42
[ 24.416661] pci 0000:24:00.3: Using iommu dma mapping
[ 24.418508] pci 0000:1f:08.0: Adding to iommu group 43
[ 24.420275] pci 0000:1f:08.3: Adding to iommu group 43
[ 24.422094] pci 0000:1f:08.4: Adding to iommu group 43
[ 24.423909] pci 0000:1f:09.0: Adding to iommu group 44
[ 24.425662] pci 0000:1f:09.3: Adding to iommu group 44
[ 24.427422] pci 0000:1f:09.4: Adding to iommu group 44
[ 24.429261] pci 0000:1f:0a.0: Adding to iommu group 45
[ 24.431027] pci 0000:1f:0a.1: Adding to iommu group 45
[ 24.432807] pci 0000:1f:0a.2: Adding to iommu group 45
[ 24.434570] pci 0000:1f:0a.3: Adding to iommu group 45
[ 24.436381] pci 0000:1f:0b.0: Adding to iommu 703489] pci 0000:1f:0b.3: Adding to iommu group 46
[ 24.939961] pci 0000:1f:0c.0: Adding to iommu group 47
[ 24.941867] pci 0000:1f:0c.1: Adding to iommu group 47
[ 24.943993] pci 0000:1f:0c.2: Adding to iommu group 47
[ 24.945768] pci 0000:1f:0c.6: Adding to iommu group 47
[ 24.947541] pci 0000:1f:0c.7: Adding to iommu group 47
[ 24.949401] pci 0000:1f:0d.0: Adding to iommu group 48
[ 24.951231] pci 0000:1f:0d.1: Adding to iommu group 48
[ 24.952980] pci 0000:1f:0d.2: Adding to iommu group 48
[ 24.954754] pci 0000:1f:0d.6: Adding to iommu group 48
[ 24.956551] pci 0000:1f:0e.0: Adding to iommu group 49
[ 24.958336] pci 0000:1f:0e.1: Adding to iommu group 49
[ 24.960261] pci 0000:1f:0f.0: Adding to iommu group 50
[ 24.962081] pci 0000:1f:0f.1: Adding to iommu group 50
[ 24.963851] pci 0000:1f:0f.2: Adding to iommu group 50
[ 24.965614] pci 0000:1f:0f.3: Adding to iommu group 50
[ 24.967385] pci 0000:1f:0f.4: Adding to iommu group 50
[ 24.969123] pci 0000:1f:0f.5: Adding to iommu group 50
[ 24.970869] pci 0000:1f:0f.6: Adding to iommu group 50
[ 24.972896] pci 0000:1f:10.0: Adding to iommu group 51
[ 24.974675] pci 0000:1f:10.1: Adding to iommu group 51
[ 24.976455] pci 0000:1f:10.2: Adding to iom[ 25.326604] pci 0000:1f:10.3: Adding to iommu group 51
[ 25.380003] pci 0000:1f:10.4: Adding to iommu group 51
[ 25.381891] pci 0000:1f:10.5: Adding to iommu group 51
[ 25.383686] pci 0000:1f:10.6: Adding to iommu group 51
[ 25.385482] pci 0000:1f:10.7: Adding to iommu group 51
[ 25.387300] pci 0000:1f:11.0: Adding to iommu group 52
[ 25.389312] pci 0000:1f:13.0: Adding to iommu group 53
[ 25.391349] pci 0000:1f:13.1: Adding to iommu group 53
[ 25.393129] pci 0000:1f:13.4: Adding to iommu group 53
[ 25.394894] pci 0000:1f:13.5: Adding to iommu group 53
[ 25.396686] pci 0000:1f:13.6: Adding to iommu group 53
[ 25.398528] pci 0000:3f:08.0: Adding to iommu group 54
[ 25.400352] pci 0000:3f:08.3: Adding to iommu group 54
[ 25.402221] pci 0000:3f:08.4: Adding to iommu group 54
[ 25.404066] pci 0000:3f:09.0: Adding to iommu group 55
[ 25.405879] pci 0000:3f:09.3: Adding to iommu group 55
[ 25.407674] pci 0000:3f:09.4: Adding to iommu group 55
[ 25.409562] pci 0000:3f:0a.0: Adding to iommu group 56
[ 25.411460] pci 0000:3f:0a.1: Adding to iommu group 56
[ 25.413273] pci 0000:3f:0a.2: Adding to iommu group 56
[ 25.415047] pci 0000:3f:0a.3: Adding to iommu group 56
[ 25.416b.0: Adding to iommu group 57
[ 25.918495] pci 0000:3f:0b.3: Adding to iommu group 57
[ 25.920362] pci 0000:3f:0c.0: Adding to iommu group 58
[ 25.922191] pci 0000:3f:0c.1: Adding to iommu group 58
[ 25.923959] pci 0000:3f:0c.2: Adding to iommu group 58
[ 25.925736] pci 0000:3f:0c.6: Adding to iommu group 58
[ 25.927515] pci 0000:3f:0c.7: Adding to iommu group 58
[ 25.929366] pci 0000:3f:0d.0: Adding to iommu group 59
[ 25.931135] pci 0000:3f:0d.1: Adding to iommu group 59
[ 25.932904] pci 0000:3f:0d.2: Adding to iommu group 59
[ 25.934675] pci 0000:3f:0d.6: Adding to iommu group 59
[ 25.936462] pci 0000:3f:0e.0: Adding to iommu group 60
[ 25.938236] pci 0000:3f:0e.1: Adding to iommu group 60
[ 25.940133] pci 0000:3f:0f.0: Adding to iommu group 61
[ 25.941962] pci 0000:3f:0f.1: Adding to iommu group 61
[ 25.944009] pci 0000:3f:0f.2: Adding to iommu group 61
[ 25.945804] pci 0000:3f:0f.3: Adding to iommu group 61
[ 25.947577] pci 0000:3f:0f.4: Adding to iommu group 61
[ 25.949357] pci 0000:3f:0f.5: Adding to iommu group 61
[ 25.951128] pci 0000:3f:0f.6: Adding to iommu group 61
[ 25.953074] pci 0000:3f:10.0: Adding to iommu group 62
[ 25.954857] pci 0000:3f:10.1: Adding to iommu group 62
[ 25.956616] pci 0000:3f:10.2: Adding to iommu group 62
[ 25.958398] pci 0000:3f:10.3: Adding to iommu group 62
[ 25.960159] pci 0000:3f:10.4: Adding to iommu group 62
[ 25.962000] pci 0000:3f:10.5: Adding to[ 26.414163] pci 0000:3f:10.6: Adding to iommu group 62
[ 26.465351] pci 0000:3f:10.7: Adding to iommu group 62
[ 26.467129] pci 0000:3f:11.0: Adding to iommu group 63
[ 26.469007] pci 0000:3f:13.0: Adding to iommu group 64
[ 26.470777] pci 0000:3f:13.1: Adding to iommu group 64
[ 26.472631] pci 0000:3f:13.4: Adding to iommu group 64
[ 26.474409] pci 0000:3f:13.5: Adding to iommu group 64
[ 26.476155] pci 0000:3f:13.6: Adding to iommu group 64
[ 26.477875] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 26.506031] Initialise system trusted keyrings
[ 26.507588] Key type blacklist registered
[ 26.509032] workingset: timestamp_bits=36 max_order=24 bucket_order=0
[ 27.272245] zbud: loaded
[ 27.493313] tsc: Refined TSC clocksource calibration: 2294.470 MHz
[ 27.495552] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2112cd48ccb, max_idle_ns: 440795253384 ns
[ 27.498868] DMAR: DRHD: handling fault status reg 2
[ 27.498868] DMAR: [DMA Read] Request device [02:00.0] PASID ffffffff fault addr bdf83000 [fault reason 06] PTE Read access is not set
[ 27.498868] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr f4000 [fault reason 06] PTE Read access is not set
[ 27.498868] NMI: IOCK error (debug interrupt?) for reason 71 on CPU 0.
[ 27.498868] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-1.elrdy.x86_64 #1
[ 27.498868] Hardware name: HP ProLiant DL388p Gen8, BIOS P70 07/01/2015
[ 27.498868] RIP: 0010:do_IRQ+0x37/0xe0
[ 27.498868] Code: 65 4c 8b 25 63 36 81 77 f7 d3 65 48 89 3d 59 36 81 77 e8 cc c7 6d ff 89 dd 65 c6 05 64 74 82 77 01 65 48 8b 3c ed 40 53 01 00 <48> 85 ff 74 4e 48 81 ff 00 f0 ff ff 77 20 48 8b 47 68 e8 c2 f2 1f
[ 27.498868] RSP: 0000:ffffc19240003fd8 EFLAGS: 00000086
[ 27.498868] RAX: 0000000080000000 RBX: 0000000000000022 RCX: 000000062c138e70
[ 27.498868] RDX: 00000000000f00a5 RSI: 000000062c138e31 RDI: ffff9f10c7c0da00
[ 27.498868] RBP: 0000000000000022 R08: fffffffffff0bdca R09: 0000000000029180
[ 27.498868] R10: 0001009128a2c99d R11: 0000000000000000 R12: 0000000000000000
[ 27.498868] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 27.498868] FS: 0000000000000000(0000) GS:ffff9f109f400000(0000) knlGS:0000000000000000
[ 27.498868] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 27.498868] CR2: ffff9f0fc9e01000 CR3: 000000074900a001 CR4: 00000000000606f0
[ 27.498868] Call Trace:
[ 27.498868] <IRQ>
[ 27.498868] common_interrupt+0xf/0xf
[ 27.498868] </IRQ>
[ 27.498868] RIP: 0010:mwait_idle+0x94/0x1c0
[ 27.498868] Code: 00 5f 01 00 48 89 d1 0f 01 c8 48 8b 00 a8 08 0f 85 a3 00 00 00 e9 07 00 00 00 0f 00 2d 27 79 51 00 31 c0 48 89 c1 fb 0f 01 c9 <65> 8b 2d e5 49 92 77 66 66 66 66 90 e9 7c ff ff ff 65 8b 05 d4 49
[ 27.498868] RSP: 0000:ffffffff89203ea8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd
[ 27.498868] RAX: 0000000000000000 RBX: 0000000000000 RCX: 0000000000000000
[ 27.498868] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000050e994e82
[ 27.498868] RBP: 0000000000000000 R08: fffffffffff0cdba R09: 0000000000029180
[ 27.498868] R10: 00010091281774e6 R11: 0000000000000000 R12: 0000000000000000
[ 27.498868] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 27.498868] ? tick_nohz_idle_stop_tick+0xb3/0xc0
[ 27.498868] do_idle+0x1ad/0x230
[ 27.498868] cpu_startup_entry+0x19/0x20
[ 27.498868] start_kernel+0x521/0x53f
[ 27.498868] secondary_startup_64+0xb6/0xc0
[ 27.498868] NMI: IOCK error (debug interrupt?) for reason 61 on CPU 0.
[ 27.498868] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-1.elrdy.x86_64 #1
[ 27.498868] Hardware name: HP ProLiant DL388p Gen8, BIOS P70 07/01/2015
[ 27.498868] RIP: 0010:do_IRQ+0x37/0xe0
[ 27.498868] Code: 65 4c 8b 25 63 36 81 77 f7 d3 65 48 89 3d 59 36 81 77 e8 cc c7 6d ff 89 dd 65 c6 05 64 74 82 77 01 65 48 8b 3c ed 40 53 01 00 <48> 85 ff 74 4e 48 81 ff 00 f0 ff ff 77 20 48 8b 47 68 e8 c2 f2 1f
[ 27.498868] RSP: 0000:ffffc19240003fd8 EFLAGS: 00000086
[ 27.498868] RAX: 0000000080000000 RBX: 0000000000000022 RCX: 000000062c138e70
[ 27.498868] RDX: 00000000000f00a5 RSI: 000000062c138e30c7c0da00
[ 27.498868] RBP: 0000000000000022 R08: fffffffffff0bdca R09: 0000000000029180
[ 27.498868] R10: 0001009128a2c99d R11: 0000000000000000 R12: 0000000000000000
[ 27.498868] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 27.498868] FS: 0000000000000000(0000) GS:ffff9f109f400000(0000) knlGS:0000000000000000
[ 27.498868] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 27.498868] CR2: ffff9f0fc9e01000 CR3: 000000074900a001 CR4: 00000000000606f0
[ 27.498868] Call Trace:
[ 27.498868] <IRQ>
[ 27.498868] common_interrupt+0xf/0xf
[ 27.498868] </IRQ>
[ 27.498868] RIP: 0010:mwait_idle+0x94/0x1c0
[ 27.498868] Code: 00 5f 01 00 48 89 d1 0f 01 c8 48 8b 00 a8 08 0f 85 a3 00 00 00 e9 07 00 00 00 0f 00 2d 27 79 51 00 31 c0 48 89 c1 fb 0f 01 c9 <65> 8b 2d e5 49 92 77 66 66 66 66 90 e9 7c ff ff ff 65 8b 05 d4 49
[ 27.498868] RSP: 0000:ffffffff89203ea8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd
[ 27.498868] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 27.498868] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000050e994e82
[ 27.498868] RBP: 0000000000000000 R08: fffffffffff0cdba R09: 0000000000029180
[ 27.498868] R10: 00010091281774e6 R11: 0000000000000000 R12: 0000000000000000
[ 27.498868] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 27.498868] ? tick_nohz_idle_stop_tick+0xb3/0xc0
[ 27.498868] do_idle+0x1ad/0x230
[ 27.498868] cpu_sta20
[ 27.498868] start_kernel+0x521/0x53f
[ 27.498868] secondary_startup_64+0xb6/0xc0
[ 27.498868] NMI: IOCK error (debug interrupt?) for reason 71 on CPU 0.
[ 27.498868] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-1.elrdy.x86_64 #1
[ 27.498868] Hardware name: HP ProLiant DL388p Gen8, BIOS P70 07/01/2015
[ 27.498868] RIP: 0010:do_IRQ+0x37/0xe0
[ 27.498868] Code: 65 4c 8b 25 63 36 81 77 f7 d3 65 48 89 3d 59 36 81 77 e8 cc c7 6d ff 89 dd 65 c6 05 64 74 82 77 01 65 48 8b 3c ed 40 53 01 00 <48> 85 ff 74 4e 48 81 ff 00 f0 ff ff 77 20 48 8b 47 68 e8 c2 f2 1f
[ 27.498868] RSP: 0000:ffffc19240003fd8 EFLAGS: 00000086
[ 27.498868] RAX: 0000000080000000 RBX: 0000000000000022 RCX: 000000062c138e70
[ 27.498868] RDX: 00000000000f00a5 RSI: 000000062c138e31 RDI: ffff9f10c7c0da00
[ 27.498868] RBP: 0000000000000022 R08: fffffffffff0bdca R09: 0000000000029180
[ 27.498868] R10: 0001009128a2c99d R11: 0000000000000000 R12: 0000000000000000
[ 27.498868] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 27.498868] FS: 0000000000000000(0000) GS:ffff9f109f400000(0000) knlGS:0000000000000000
[ 27.498868] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 27.498868] CR2: ffff9f0fc9e01000 CR3: 000000074900a001 CR4
[ 27.498868] Call Trace:
[ 27.498868] <IRQ>
[ 27.498868] common_interrupt+0xf/0xf
[ 27.498868] </IRQ>
[ 27.498868] RIP: 0010:mwait_idle+0x94/0x1c0
[ 27.498868] Code: 00 5f 01 00 48 89 d1 0f 01 c8 48 8b 00 a8 08 0f 85 a3 00 00 00 e9 07 00 00 00 0f 00 2d 27 79 51 00 31 c0 48 89 c1 fb 0f 01 c9 <65> 8b 2d e5 49 92 77 66 66 66 66 90 e9 7c ff ff ff 65 8b 05 d4 49
[ 27.498868] RSP: 0000:ffffffff89203ea8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd
[ 27.498868] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 27.498868] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000050e994e82
[ 27.498868] RBP: 0000000000000000 R08: fffffffffff0cdba R09: 0000000000029180
[ 27.498868] R10: 00010091281774e6 R11: 0000000000000000 R12: 0000000000000000
[ 27.498868] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 27.498868] ? tick_nohz_idle_stop_tick+0xb3/0xc0
[ 27.498868] do_idle+0x1ad/0x230
[ 27.498868] cpu_startup_entry+0x19/0x20
[ 27.498868] start_kernel+0x521/0x53f
[ 27.498868] secondary_startup_64+0xb6/0xc0
[ 27.498868] NMI: IOCK error (debug interrupt?) for reason 61 on CPU 0.
[ 27.498868] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-1.elr 27.498868] Hardware name: HP ProLiant DL388p Gen8, BIOS P70 07/01/2015
[ 27.498868] RIP: 0010:do_IRQ+0x37/0xe0
[ 27.498868] Code: 65 4c 8b 25 63 36 81 77 f7 d3 65 48 89 3d 59 36 81 77 e8 cc c7 6d ff 89 dd 65 c6 05 64 74 82 77 01 65 48 8b 3c ed 40 53 01 00 <48> 85 ff 74 4e 48 81 ff 00 f0 ff ff 77 20 48 8b 47 68 e8 c2 f2 1f
[ 27.498868] RSP: 0000:ffffc19240003fd8 EFLAGS: 00000086
[ 27.498868] RAX: 0000000080000000 RBX: 0000000000000022 RCX: 000000062c138e70
[ 27.498868] RDX: 00000000000f00a5 RSI: 000000062c138e31 RDI: ffff9f10c7c0da00
[ 27.498868] RBP: 0000000000000022 R08: fffffffffff0bdca R09: 0000000000029180
[ 27.498868] R10: 0001009128a2c99d R11: 0000000000000000 R12: 0000000000000000
[ 27.498868] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 27.498868] FS: 0000000000000000(0000) GS:ffff9f109f400000(0000) knlGS:0000000000000000
[ 27.498868] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 27.498868] CR2: ffff9f0fc9e01000 CR3: 000000074900a001 CR4: 00000000000606f0
[ 27.498868] Call Trace:
[ 27.498868] <IRQ>
[ 27.498868] common_interrupt+0xf/0xf
[ 27.498868] </IRQ>
[ 27.498868] RIP: 0010:mwait_idle+0x94/0x1c0
[ 27.498868] Code: 00 5f 01 00 48 89 d1 0f 01 c8 48 8b 00 a8 08 0f 85 a3 00 00 00 e9 07 00 00 00 0f 00 2d 27 79 51 00 31 c0 48 89 c1 fb 0f 01 c9 <6592 77 66 66 66 66 90 e9 7c ff ff ff 65 8b 05 d4 49
[ 27.498868] RSP: 0000:ffffffff89203ea8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd
[ 27.498868] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 27.498868] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000050e994e82
[ 27.498868] RBP: 0000000000000000 R08: fffffffffff0cdba R09: 0000000000029180
[ 27.498868] R10: 00010091281774e6 R11: 0000000000000000 R12: 0000000000000000
[ 27.498868] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 27.498868] ? tick_nohz_idle_stop_tick+0xb3/0xc0
[ 27.498868] do_idle+0x1ad/0x230
[ 27.498868] cpu_startup_entry+0x19/0x20
[ 27.498868] start_kernel+0x521/0x53f
[ 27.498868] secondary_startup_64+0xb6/0xc0
[ 37.963387] DMAR: DRHD: handling fault status reg 202
[ 37.964382] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr bdf6f000 [fault reason 06] PTE Read access is not set
[ 37.969040] clocksource: Switched to clocksource tsc
[ 37.976281] NET: Registered protocol family 38
[ 37.977803] Key type asymmetric registered
[ 37.979205] Asymmetric key parser 'x509'38.326117] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 38.354549] DMAR: DRHD: handling fault status reg 302
[ 38.483363] io scheduler mq-deadline registered
[ 38.483229] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr bdf6f000 [fault reason 06] PTE Read access is not set
[ 38.490536] io scheduler kyber registered
[ 38.492001] io scheduler bfq registered
[ 38.493709] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 38.506366] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 38.511473] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 38.514125] ACPI: Power Button [PWRF]
[ 38.517747] thermal LNXTHERM:00: registered as thermal_zone0
[ 38.519998] ACPI: Thermal Zone [THM0] (8 C)
[ 38.521534] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 38.524098] pstore: Registered erst as persistent store backend
[ 38.526185] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[ 38.528992] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 38.551775] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 38.575137] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 38.579209] Non-volatile m1.3
[ 38.980704] Linux agpgart interface v0.103
[ 38.986794] rdac: device handler registered
[ 38.988402] hp_sw: device handler registered
[ 38.989860] emc: device handler registered
[ 38.991391] alua: device handler registered
[ 38.992918] libphy: Fixed MDIO Bus: probed
[ 38.994458] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 38.996624] ehci-pci: EHCI PCI platform driver
[ 38.998539] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 39.000492] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 39.003028] ehci-pci 0000:00:1a.0: debug port 2
[ 39.005587] ehci-pci 0000:00:1a.0: Using iommu dma mapping
[ 39.007421] ehci-pci 0000:00:1a.0: DMAR: 32bit DMA uses non-identity mapping
[ 39.013689] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 39.015990] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf6c60000
[ 39.024342] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 39.026374] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 39.029128] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 39.031521] usb usb1: Product: EHCI Host Controller
[ 39.033235] usb usb1: Manufacturer: Linux 5.4.0-1.elrdy.x86_64 ehci_hcd
[ 39.035433] usb usb1: SerialNumber: 0000:00:1a.0
[ 39.037312] hub 1-0:1.0: USB hub found
[ 39.038602] hub 1-0:1.0: 2 ports detected
[ 39.040601] ehcid.0: EHCI Host Controller
[ 39.442585] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 39.445220] ehci-pci 0000:00:1d.0: debug port 2
[ 39.447471] ehci-pci 0000:00:1d.0: Using iommu dma mapping
[ 39.449784] ehci-pci 0000:00:1d.0: DMAR: 32bit DMA uses non-identity mapping
[ 39.456174] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 39.458515] ehci-pci 0000:00:1d.0: irq 20, io mem 0xf6c50000
[ 39.467348] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 39.469368] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 39.472545] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 39.474963] usb usb2: Product: EHCI Host Controller
[ 39.476605] usb usb2: Manufacturer: Linux 5.4.0-1.elrdy.x86_64 ehci_hcd
[ 39.478797] usb usb2: SerialNumber: 0000:00:1d.0
[ 39.480599] hub 2-0:1.0: USB hub found
[ 39.481906] hub 2-0:1.0: 2 ports detected
[ 39.483594] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 39.485754] ohci-pci: OHCI PCI platform driver
[ 39.487402] uhci_hcd: USB Universal Host Controller Interface driver
[ 3 0000:01:00.4: UHCI Host Controller
[ 39.991418] uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3
[ 39.993992] uhci_hcd 0000:01:00.4: detected 8 ports
[ 39.995643] uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
[ 39.998040] uhci_hcd 0000:01:00.4: irq 16, io base 0x00003c00
[ 40.000159] uhci_hcd 0000:01:00.4: DMAR: 32bit DMA uses non-identity mapping
[ 40.002591] uhci_hcd 0000:01:00.4: unable to allocate consistent memory for frame list
[ 40.005225] uhci_hcd 0000:01:00.4: startup error -16
[ 40.006881] uhci_hcd 0000:01:00.4: USB bus 3 deregistered
[ 40.008891] uhci_hcd 0000:01:00.4: init 0000:01:00.4 fail, -16
[ 40.010882] uhci_hcd: probe of 0000:01:00.4 failed with error -16
[ 40.013260] usbcore: registered new interface driver usbserial_generic
[ 40.015554] usbserial: USB Serial support registered for generic
[ 40.017670] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 40.023064] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 40.024809] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 40.026831] mousedev: PS/2 mouse device common for all mice
[ 40.029084] rtc_cmos 00:0om S4
[ 40.122366] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 40.530546] dmar_fault: 3 callbacks suppressed
[ 40.530547] DMAR: DRHD: handling fault status reg 502
[ 40.530550] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr bdf6f000 [fault reason 06] PTE Read access is not set
[ 40.530862] rtc_cmos 00:03: registered as rtc0
[ 40.541475] rtc_cmos 00:03: alarms up to one day, 114 bytes nvram, hpet irqs
[ 40.543929] intel_pstate: Intel P-state driver initializing
[ 40.548702] hidraw: raw HID events driver (C) Jiri Kosina
[ 40.550559] usbcore: registered new interface driver usbhid
[ 40.552493] usbhid: USB HID core driver
[ 40.553883] drop_monitor: Initializing network drop monitor service
[ 40.556064] Initializing XFRM netlink socket
[ 40.557787] NET: Registered protocol family 10
[ 40.559874] Segment Routing with IPv6
[ 40.561167] NET: Registered protocol family 17
[ 40.562922] mpls_gso: MPLS GSO support
[ 40.567394] microcode: sig=0x206d7, pf=0x1, revision=0x710
[ 40.569957] microcode: Microcode Update Driver: v2.2.
[ 40.569960] IPI shorthand broadcast: enabl4325] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 40.680863] AVX version of gcm_enc/dec engaged.
[ 40.976911] AES CTR mode by8 optimization enabled
[ 41.041865] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 41.044686] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 41.047567] hub 1-1:1.0: USB hub found
[ 41.049124] hub 1-1:1.0: 6 ports detected
[ 41.069397] sched_clock: Marking stable (36280828753, 4788532579)->(42117913144, -1048551812)
[ 41.072745] registered taskstats version 1
[ 41.074169] Loading compiled-in X.509 certificates
[ 41.104029] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 41.106779] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 41.109691] hub 2-1:1.0: USB hub found
[ 41.111144] hub 2-1:1.0: 8 ports detected
[ 41.169154] Loaded X.509 cert 'Red Hat Enterprise Linux kernel signing key: 8c404550f293ed26629b825d4c1d0241b9c443b3'
[ 41.173102] zswap: loaded using pool lzo/zbud
[ 41.174917] pstore: Using crash dump compression: deflate
[ 41.195587] Key type big_key registered
[ 41.205950] Key type encrypted registered
[ 41.207384] ima: No Tund, activating TPM-bypass!
[ 41.357073] DMAR: DRHD: handling fault status reg 602
[ 41.509136] ima: Allocated hash algorithm: sha1
[ 41.510828] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr bdf6f000 [fault reason 06] PTE Read access is not set
[ 41.510865] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[ 41.512456] ima: No architecture policies found
[ 41.520557] evm: Initialising EVM extended attributes:
[ 41.522358] evm: security.selinux
[ 41.523487] evm: security.ima
[ 41.524503] evm: security.capability
[ 41.525743] evm: HMAC attrs: 0x1
[ 41.527889] rtc_cmos 00:03: setting system clock to 2019-12-04T15:41:17 UTC (1575474077)
[ 41.533022] Freeing unused decrypted memory: 2040K
[ 41.555630] Freeing unused kernel image memory: 2388K
[ 41.583373] Write protecting the kernel read-only data: 20480k
[ 41.594712] usb 2-1.3: New USB device found, idVendor=0424, idProduct=2660, bcdDevice= 8.01
[ 41.647397] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 41.681369] hub 2-1.3:1.0: USB hub found
[ 41.699207] hub 2-1.3:1.0: 2 ports detected
[ 41.699596] Freeing unused kernel image memory: 2008K
[ 41.741511] Freeing unused kernel image memory: 1952K
[ 41.779962] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 41.809315] x86/mm: Checking user space page tables
[ 41.845804] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 41.874970] Run /init as init process
[ 42.007276] DMAR: DRHD: handling fault status reg 702
[ 42.009687] ERST: [Firmware Warn]: Firmware does not respond in time.
[ 42.030277] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr e8000 [fault reason 06] PTE Read access is not set
[ 42.115384] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy)
[ 42.229446] systemd[1]: Detected architecture x86-64.
[ 42.252166] systemd[1]: Running in initial RAM disk.
Welcome to Red Hat Enterprise Linux 8.2 Beta (Ootpa) dracut-049-57.git20191031.el8 (Initramfs)!
[ 42.284606] systemd[1]: Set hostname to <hp-dl388g8-07.rhts.eng.pek2.redhat.com>.
[ 42.359206] DMAR: DRHD: handling fault status reg 2
[ 42.432835] random: systemd: uninitialized urandom read (16 bytes read)
[ 42.462642] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 42.483710] random: systemd: uninitialized urandom read (16 bytes read)
[ 42.516832] systemd[1]: Reached target Timers.
[ OK ] Reached target Timers.
[ 42.540427] random: systemd: uninitialized urandom read (16 bytes read)
[ 42.570677] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 42.593644] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 42.623651] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 42.652589] systemd[1]: Starting Setup Virtual Console...
Starting Setup Virtual Console...
Starting Journal Service...
Starting Apply Kernel Variables...
Starting Create list of required st…ce nodes for the current kernel...
[ OK ] Created slice system-systemd\x2dhibernate\x2dresume.slice.
[ OK ] Listening on udev Control Socket.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Reached target Sockets.
[ OK ] Started Hardware RNG Entropy Gatherer Daemon.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Create list of required sta…vice nodes for the current kernel.
Starting Create Static Device Nodes in /dev...
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Started Setup Virtual Console.
Starting dracut cmdline hook...
[ OK ] Started dracut cmdline hook.
Starting dracut pre-udev hook...
[ 43.328740] device-mapper: uevent: version 1.0.3
[ OK ] Started Journal Service.
[ 43.349726] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ OK ] Started dracut pre-udev hook.
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
Starting udev Coldplug all Devices...
Mounting Kernel Configuration File System...
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Started udev Coldplug all Devices.
Starting dracut initqueue hook...
Starting Show Plymouth Boot Screen...
[ OK ] Started Show Plymouth Boot Screen.
[ OK ] Reached target Paths.
[ OK ] Started Forward Password Requests to Plymouth Directory Watch.
[ 44.029570] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 44.059889] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 44.096144] dca service started, version 1.12.1
[ 44.137216] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[ 44.168566] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 44.239195] igb 0000:24:00.0: added PHC on eth0
[ 44.259216] igb 0000:24:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 44.289707] igb 0000:24:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 00:1b:21:85:84:00
[ 44.289709] igb 0000:24:00.0: eth0: PBA No: Unknown
[ 44.289714] igb 0000:24:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 44.425389] igb 0000:24:00.1: added PHC on eth1
[ 44.446311] igb 0000:24:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 44.477181] igb 0000:24:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 00:1b:21:85:84:01
[ 44.509245] igb 0000:24:00.1: eth1: PBA No: Unknown
[ 44.530754] igb 0000:24:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 44.611561] igb 0000:24:00.2: added PHC on eth2
[ 44.631998] igb 0000:24:00.2: Intel(R) Gigabit Ethernet Network Connection
[ 44.649576] random: crng init done
[ 44.663205] igb 0000:24:00.2: eth2: (PCIe:5.0Gb/s:Width x4) 00:1b:21:85:84:02
[ 44.679332] random: 7 urandom warning(s) missed due to ratelimiting
[ 44.743690] igb 0000:24:00.2: eth2: PBA No: Unknown
[ 44.767746] igb 0000:24:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 44.847056] igb 0000:24:00.3: added PHC on eth3
[ 44.868536] igb 0000:24:00.3: Intel(R) Gigabit Ethernet Network Connection
[ 44.900979] igb 0000:24:00.3: eth3: (PCIe:5.0Gb/s:Width x4) 00:1b:21:85:84:03
[ 44.934190] igb 0000:24:00.3: eth3: PBA No: Unknown
[ 44.957079] igb 0000:24:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 44.994901] igb 0000:24:00.3 ens5f3: renamed from eth3
[ 45.026876] igb 0000:24:00.1 ens5f1: renamed from eth1
[ 45.059597] igb 0000:24:00.2 ens5f2: renamed from eth2
[ 45.094957] igb 0000:24:00.0 ens5f0: renamed from eth0
[ 46.364986] dmar_fault: 17 callbacks suppressed
[ 46.364987] DMAR: DRHD: handling fault status reg 602
[ 46.414596] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr bdf6f000 [fault reason 06] PTE Read access is not set
[ 47.367057] DMAR: DRHD: handling fault status reg 702
[ 47.391713] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr bdf6f000 [fault reason 06] PTE Read access is not set
[ 48.172274] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 48.218724] tg3.c:v3.137 (May 11, 2014)
[ 48.239682] HP HPSA Driver (v 3.4.20-170-RH1)
[ 48.260674] hpsa 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 48.296188] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 48.320188] mgag200 0000:01:00.1: remove_conflicting_pci_framebuffers: bar 0: 0xf5000000 -> 0xf5ffffff
[ 48.364098] mgag200 0000:01:00.1: remove_conflicting_pci_framebuffers: bar 1: 0xf7be0000 -> 0xf7be3fff
[ 48.408123] DMAR: DRHD: handling fault status reg 2
[ 48.408126] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr bdf6f000 [fault reason 06] PTE Read access is not set
[ 48.487590] mgag200 0000:01:00.1: remove_conflicting_pci_framebuffers: bar 2: 0xf7000000 -> 0xf77fffff
[ 48.531446] mgag200 0000:01:00.1: vgaarb: deactivate vga console
[ 48.560814] Console: switching to colour dummy device 80x25
[ 48.595089] scsi host0: ata_piix
[ 48.610235] [TTM] Zone kernel: Available graphics memory: 24652642 KiB
[ 48.641241] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 48.672252] [TTM] Initializing pool allocator
[ 48.692793] [TTM] Initializing DMA pool allocator
[ 48.723457] scsi host1: ata_piix
[ 48.738972] ata1: SATA max UDMA/133 cmd 0x4000 ctl 0x4008 bmdma 0x4020 irq 17
[ 48.774438] ata2: SATA max UDMA/133 cmd 0x4010 ctl 0x4018 bmdma 0x4028 irq 17
[ 48.813583] fbcon: mgag200drmfb (fb0) is primary device
[ 48.908103] tg3 0000:03:00.0 eth0: Tigon3 [partno(629133-002) rev 5719001] (PCI Express) MAC address ac:16:2d:84:39:74
[ 48.908108] tg3 0000:03:00.0 eth0: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 48.908111] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ 48.908113] tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 48.921080] tg3 0000:03:00.1 eth1: Tigon3 [partno(629133-002) rev 5719001] (PCI Express) MAC address ac:16:2d:84:39:75
[ 48.921084] tg3 0000:03:00.1 eth1: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 48.921087] tg3 0000:03:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ 48.921090] tg3 0000:03:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
[ 48.922327] Console: switching to colour frame buffer device 128x48
[ 49.111114] DMAR: DRHD: handling fault status reg 102
[ 49.332521] mgag200 0000:01:00.1: fb0: mgag200drmfb frame buffer device
[ 49.368331] [drm] Initialized mgag200 1.0.0 20110418 for 0000:01:00.1 on minor 0
[ 49.409455] tg3 0000:03:00.2 eth2: Tigon3 [partno(629133-002) rev 5719001] (PCI Express) MAC address ac:16:2d:84:39:76
[ 49.461848] tg3 0000:03:00.2 eth2: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 49.508392] tg3 0000:03:00.2 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ 49.545246] tg3 0000:03:00.2 eth2: dma_rwctrl[00000001] dma_mask[64-bit]
[ 49.549783] e1000e 0000:06:00.0 eth3: (PCI Express:2.5GT/s:Width x4) 00:15:17:dc:98:dd
[ 49.613128] e1000e 0000:06:00.0 eth3: Intel(R) PRO/1000 Network Connection
[ 49.613209] e1000e 0000:06:00.0 eth3: MAC: 0, PHY: 4, PBA No: D64202-005
[ 49.676115] e1000e 0000:06:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 49.728846] tg3 0000:03:00.3 eth4: Tigon3 [partno(629133-002) rev 5719001] (PCI Express) MAC address ac:16:2d:84:39:77
[ 49.781375] tg3 0000:03:00.3 eth4: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 49.829247] tg3 0000:03:00.3 eth4: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ 49.865681] tg3 0000:03:00.3 eth4: dma_rwctrl[00000001] dma_mask[64-bit]
[ 49.900835] tg3 0000:03:00.1 eno2: renamed from eth1
[ 49.930935] tg3 0000:03:00.0 eno1: renamed from eth0
[ 49.971618] tg3 0000:03:00.2 eno3: renamed from eth2
[ 50.009587] tg3 0000:03:00.3 eno4: renamed from eth4
[ 50.043917] e1000e 0000:06:00.1 eth0: (PCI Express:2.5GT/s:Width x4) 00:15:17:dc:98:dc
[ 50.081045] e1000e 0000:06:00.1 eth0: Intel(R) PRO/1000 Network Connection
[ 50.113434] e1000e 0000:06:00.1 eth0: MAC: 0, PHY: 4, PBA No: D64202-005
[ 50.145176] e1000e 0000:07:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 50.149349] ata2.01: failed to resume link (SControl 0)
[ 50.224420] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 50.250822] ata2.01: SATA link down (SStatus 4 SControl 0)
[ 50.279009] ata1.01: failed to resume link (SControl 0)
[ 50.315900] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 50.342439] ata1.01: SATA link down (SStatus 4 SControl 0)
[ 50.346316] e1000e 0000:07:00.0 eth1: (PCI Express:2.5GT/s:Width x4) 00:15:17:dc:98:df
[ 50.405652] e1000e 0000:07:00.0 eth1: Intel(R) PRO/1000 Network Connection
[ 50.438096] e1000e 0000:07:00.0 eth1: MAC: 0, PHY: 4, PBA No: D64202-005
[ 50.470082] e1000e 0000:07:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 50.674293] e1000e 0000:07:00.1 eth2: (PCI Express:2.5GT/s:Width x4) 00:15:17:dc:98:de
[ 50.709841] e1000e 0000:07:00.1 eth2: Intel(R) PRO/1000 Network Connection
[ 50.740890] e1000e 0000:07:00.1 eth2: MAC: 0, PHY: 4, PBA No: D64202-005
[ 50.775942] e1000e 0000:07:00.0 ens1f0: renamed from eth1
[ 50.813818] e1000e 0000:07:00.1 ens1f1: renamed from eth2
[ 51.375720] dmar_fault: 8 callbacks suppressed
[ 51.375723] DMAR: DRHD: handling fault status reg 402
[ 51.425802] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr bdf6f000 [fault reason 06] PTE Read access is not set
[ 52.376646] DMAR: DRHD: handling fault status reg 502
[ 52.402441] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr bdf6f000 [fault reason 06] PTE Read access is not set
[ 53.377497] DMAR: DRHD: handling fault status reg 602
[ 53.403884] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr bdf6f000 [fault reason 06] PTE Read access is not set
[ 54.094325] DMAR: DRHD: handling fault status reg 702
[ 56.381429] dmar_fault: 14 callbacks suppressed
[ 56.381432] DMAR: DRHD: handling fault status reg 402
[ 56.431218] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr bdf6f000 [fault reason 06] PTE Read access is not set
[ 56.561356] DMAR: DRHD: handling fault status reg 502
[ 56.584460] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr bdf83000 [fault reason 06] PTE Read access is not set
[ 57.382311] DMAR: DRHD: handling fault status reg 602
[ 57.409148] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr bdf6f000 [fault reason 06] PTE Read access is not set
[ 57.569711] DMAR: DRHD: handling fault status reg 702
[ 61.385588] dmar_fault: 26 callbacks suppressed
[ 61.385591] DMAR: DRHD: handling fault status reg 2
[ 61.434765] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr bdf6f000 [fault reason 06] PTE Read access is not set
[ 61.597887] DMAR: DRHD: handling fault status reg 102
[ 61.621337] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr bdf83000 [fault reason 06] PTE Read access is not set
[ 62.386532] DMAR: DRHD: handling fault status reg 202
[ 62.413871] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr bdf6f000 [fault reason 06] PTE Read access is not set
[ 62.606154] DMAR: DRHD: handling fault status reg 302
[ 66.392231] dmar_fault: 26 callbacks suppressed
[ 66.392233] DMAR: DRHD: handling fault status reg 402
[ 66.441876] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr bdf6f000 [fault reason 06] PTE Read access is not set
[ 66.631917] DMAR: DRHD: handling fault status reg 502
[ 66.655106] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr bdf83000 [fault reason 06] PTE Read access is not set
[ 67.392987] DMAR: DRHD: handling fault s[tatus reg 602
[ 67.419734] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr bdf6f000 [fault reason 06] PTE Read access is not set
[ 67.640410] DMAR: DRHD: handling fault status reg 702
[-- Attachment #3: config-5.4.0-1.elrdy.x86_64 --]
[-- Type: text/plain, Size: 198896 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 5.4.0-1.elrdy.x86_64 Kernel Configuration
#
#
# Compiler: gcc (GCC) 8.2.1 20180905 (Red Hat 8.2.1-3)
#
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=80201
CONFIG_CLANG_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_HEADER_TEST=y
CONFIG_KERNEL_HEADER_TEST=y
CONFIG_UAPI_HEADER_TEST=y
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_SCHED_AVG_IRQ=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_PSI=y
# CONFIG_PSI_DEFAULT_DISABLED is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_NOCB_CPU=y
# end of RCU Subsystem
CONFIG_BUILD_BIN2C=y
# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_RSEQ=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
# CONFIG_SLAB_FREELIST_HARDENED is not set
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DYNAMIC_PHYSICAL_MASK=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_RETPOLINE=y
CONFIG_X86_CPU_RESCTRL=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_AMD_PLATFORM_DEVICE=y
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_X86_HV_CALLBACK_VECTOR=y
CONFIG_XEN=y
# CONFIG_XEN_PV is not set
CONFIG_XEN_PVHVM=y
CONFIG_XEN_PVHVM_SMP=y
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_XEN_PVH is not set
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
CONFIG_PVH=y
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
# CONFIG_ACRN_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
# CONFIG_CALGARY_IOMMU is not set
CONFIG_MAXSMP=y
CONFIG_NR_CPUS_RANGE_BEGIN=8192
CONFIG_NR_CPUS_RANGE_END=8192
CONFIG_NR_CPUS_DEFAULT=8192
CONFIG_NR_CPUS=8192
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=m
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=m
CONFIG_PERF_EVENTS_AMD_POWER=m
# end of Performance monitoring
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_I8K=m
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
# CONFIG_MICROCODE_OLD_INTERFACE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_5LEVEL=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_X86_CPA_STATISTICS=y
CONFIG_AMD_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT is not set
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=m
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_INTEL_UMIP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_MIXED=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
# CONFIG_KEXEC_SIG is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
CONFIG_LIVEPATCH=y
# end of Processor type and features
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_TAD=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_NFIT=m
# CONFIG_NFIT_SECURITY_DEBUG is not set
CONFIG_ACPI_HMAT=y
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
CONFIG_DPTF_POWER=m
CONFIG_ACPI_WATCHDOG=y
CONFIG_ACPI_EXTLOG=m
CONFIG_ACPI_ADXL=y
CONFIG_PMIC_OPREGION=y
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_X86_PM_TIMER=y
CONFIG_SFI=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
# end of CPU Frequency scaling
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
CONFIG_CPU_IDLE_GOV_HALTPOLL=y
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle
CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_MMCONF_FAM10H=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_X86_SYSFB is not set
# end of Bus options (PCI etc.)
#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
# end of Binary Emulations
CONFIG_X86_DEV_DMA_OPS=y
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
CONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
CONFIG_APPLE_PROPERTIES=y
# CONFIG_RESET_ATTACK_MITIGATION is not set
CONFIG_EFI_RCI2_TABLE=y
# end of EFI (Extensible Firmware Interface) Support
CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y
CONFIG_EFI_DEV_PATH_PARSER=y
CONFIG_EFI_EARLYCON=y
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_AMD_SEV=y
CONFIG_KVM_MMU_AUDIT=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
CONFIG_VHOST_VSOCK=m
CONFIG_VHOST=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_64BIT_TIME=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_REFCOUNT=y
# CONFIG_REFCOUNT_FULL is not set
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_PLUGIN_HOSTCC=""
CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
CONFIG_BLK_WBT=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_MQ_RDMA=y
CONFIG_BLK_PM=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_THP_SWAP=y
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
CONFIG_MEM_SOFT_DIRTY=y
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
CONFIG_ZSMALLOC_STAT=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ZONE_DEVICE=y
CONFIG_DEV_PAGEMAP_OPS=y
CONFIG_DEVICE_PRIVATE=y
CONFIG_FRAME_VECTOR=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# end of Memory Management options
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_INTERFACE=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
# CONFIG_SMC is not set
CONFIG_XDP_SOCKETS=y
CONFIG_XDP_SOCKETS_DIAG=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_ESP_OFFLOAD=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_NV=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
# CONFIG_TCP_CONG_CDG is not set
CONFIG_TCP_CONG_BBR=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
# CONFIG_NETFILTER_NETLINK_ACCT is not set
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
CONFIG_NF_LOG_NETDEV=m
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_SET=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_CONNLIMIT=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
CONFIG_NFT_TUNNEL=m
CONFIG_NFT_OBJREF=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB=m
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
CONFIG_NFT_OSF=m
CONFIG_NFT_TPROXY=m
# CONFIG_NFT_SYNPROXY is not set
CONFIG_NF_DUP_NETDEV=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
# CONFIG_NF_FLOW_TABLE is not set
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_IPMAC=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
# CONFIG_IP_VS_MH is not set
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not set
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_LOG_BRIDGE=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_IB=y
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_DIAG=m
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
CONFIG_6LOWPAN=m
# CONFIG_6LOWPAN_DEBUGFS is not set
# CONFIG_6LOWPAN_NHC is not set
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
# CONFIG_NET_SCH_SKBPRIO is not set
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_CAKE=m
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not set
CONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_SFQ is not set
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq_codel"
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_EMATCH_CANID is not set
CONFIG_NET_EMATCH_IPSET=m
# CONFIG_NET_EMATCH_IPT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_SAMPLE=m
# CONFIG_NET_ACT_IPT is not set
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_ACT_MPLS=m
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
# CONFIG_NET_ACT_CONNMARK is not set
CONFIG_NET_ACT_CTINFO=m
CONFIG_NET_ACT_SKBMOD=m
# CONFIG_NET_ACT_IFE is not set
CONFIG_NET_ACT_TUNNEL_KEY=m
CONFIG_NET_ACT_CT=m
CONFIG_NET_TC_SKB_EXT=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_OPENVSWITCH_GENEVE=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_HYPERV_VSOCKETS=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
# CONFIG_MPLS_ROUTING is not set
CONFIG_NET_NSH=y
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
# CONFIG_BPF_STREAM_PARSER is not set
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options
# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
# CONFIG_CAN_J1939 is not set
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_VXCAN is not set
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_KVASER_PCIEFD is not set
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_C_CAN_PCI=m
CONFIG_CAN_CC770=m
# CONFIG_CAN_CC770_ISA is not set
CONFIG_CAN_CC770_PLATFORM=m
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_PEAK_PCIEFD is not set
CONFIG_CAN_SJA1000=m
CONFIG_CAN_EMS_PCI=m
# CONFIG_CAN_F81601 is not set
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_PLX_PCI=m
# CONFIG_CAN_SJA1000_ISA is not set
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_SOFTING=m
#
# CAN SPI interfaces
#
# CONFIG_CAN_HI311X is not set
# CONFIG_CAN_MCP251X is not set
# end of CAN SPI interfaces
#
# CAN USB interfaces
#
CONFIG_CAN_8DEV_USB=m
CONFIG_CAN_EMS_USB=m
CONFIG_CAN_ESD_USB2=m
# CONFIG_CAN_GS_USB is not set
CONFIG_CAN_KVASER_USB=m
# CONFIG_CAN_MCBA_USB is not set
CONFIG_CAN_PEAK_USB=m
# CONFIG_CAN_UCAN is not set
# end of CAN USB interfaces
# CONFIG_CAN_DEBUG_DEVICES is not set
# end of CAN Device Drivers
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
# CONFIG_BT_6LOWPAN is not set
# CONFIG_BT_LEDS is not set
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_DEBUGFS=y
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_BCM=y
# CONFIG_BT_HCIBTUSB_MTK is not set
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_INTEL is not set
# CONFIG_BT_HCIUART_AG6XX is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
# CONFIG_BT_MTKSDIO is not set
# end of Bluetooth device drivers
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
# CONFIG_CFG80211_WEXT is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
# CONFIG_NFC is not set
CONFIG_PSAMPLE=m
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
# CONFIG_LWTUNNEL_BPF is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
CONFIG_FAILOVER=m
CONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIE_ECRC=y
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
# CONFIG_PCIE_PTM is not set
# CONFIG_PCIE_BW is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
# CONFIG_PCI_PF_STUB is not set
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_PCI_P2PDMA is not set
CONFIG_PCI_LABEL=y
CONFIG_PCI_HYPERV=m
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y
#
# PCI controller drivers
#
#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
CONFIG_VMD=y
CONFIG_PCI_HYPERV_INTERFACE=m
#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_HMEM_REPORTING=y
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_SYS_HYPERVISOR=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#
# end of Bus devices
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_GNSS is not set
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
#
# Partition parsers
#
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# end of Partition parsers
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_MCHP23K256 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers
# CONFIG_MTD_ONENAND is not set
# CONFIG_MTD_RAW_NAND is not set
# CONFIG_MTD_SPI_NAND is not set
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers
# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_MTD_HYPERBUS is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_ZRAM=m
CONFIG_ZRAM_WRITEBACK=y
# CONFIG_ZRAM_MEMORY_TRACKING is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_XEN_BLKDEV_FRONTEND=m
CONFIG_VIRTIO_BLK=m
# CONFIG_VIRTIO_BLK_SCSI is not set
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_RSXX is not set
#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_FABRICS=m
CONFIG_NVME_RDMA=m
CONFIG_NVME_FC=m
# CONFIG_NVME_TCP is not set
CONFIG_NVME_TARGET=m
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_RDMA=m
CONFIG_NVME_TARGET_FC=m
CONFIG_NVME_TARGET_FCLOOP=m
# CONFIG_NVME_TARGET_TCP is not set
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
CONFIG_MISC_RTSX=m
CONFIG_PVPANIC=y
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_INTEL_MEI_HDCP is not set
CONFIG_VMWARE_VMCI=m
#
# Intel MIC & related support
#
#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set
#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set
#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
#
# VOP Driver
#
# end of Intel MIC & related support
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_MISC_ALCOR_PCI is not set
CONFIG_MISC_RTSX_PCI=m
CONFIG_MISC_RTSX_USB=m
# CONFIG_HABANA_AI is not set
# end of Misc devices
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
# CONFIG_SCSI_CXGB3_ISCSI is not set
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=m
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_SMARTPQI=m
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
CONFIG_VMWARE_PVSCSI=m
# CONFIG_XEN_SCSI_FRONTEND is not set
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
# CONFIG_FCOE is not set
CONFIG_FCOE_FNIC=m
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
# CONFIG_TCM_QLA2XXX is not set
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_QEDI=m
CONFIG_QEDF=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support
CONFIG_ATA=m
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=m
# CONFIG_MD_CLUSTER is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_WRITECACHE=m
CONFIG_DM_ERA=m
# CONFIG_DM_CLONE is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
# CONFIG_DM_DUST is not set
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
CONFIG_ISCSI_TARGET_CXGB4=m
# CONFIG_SBP_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_IPVLAN_L3S=y
CONFIG_IPVLAN=m
CONFIG_IPVTAP=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
# CONFIG_GTP is not set
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
CONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
CONFIG_NET_VRF=m
CONFIG_VSOCKMON=m
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
# end of Distributed Switch Architecture drivers
CONFIG_ETHERNET=y
CONFIG_MDIO=m
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_ENA_ETHERNET=m
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
CONFIG_AMD_XGBE=m
# CONFIG_AMD_XGBE_DCB is not set
CONFIG_AMD_XGBE_HAVE_ECC=y
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_AQTION=m
# CONFIG_NET_VENDOR_ARC is not set
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_TIGON3_HWMON=y
CONFIG_BNX2X=m
CONFIG_BNX2X_SRIOV=y
# CONFIG_SYSTEMPORT is not set
CONFIG_BNXT=m
CONFIG_BNXT_SRIOV=y
CONFIG_BNXT_FLOWER_OFFLOAD=y
CONFIG_BNXT_DCB=y
# CONFIG_BNXT_HWMON is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
# CONFIG_NET_VENDOR_CADENCE is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
CONFIG_CAVIUM_PTP=y
CONFIG_LIQUIDIO=m
CONFIG_LIQUIDIO_VF=m
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
CONFIG_CHELSIO_T4=m
# CONFIG_CHELSIO_T4_DCB is not set
CONFIG_CHELSIO_T4VF=m
CONFIG_CHELSIO_LIB=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
# CONFIG_NET_VENDOR_CORTINA is not set
# CONFIG_CX_ECAT is not set
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=m
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
# CONFIG_BE2NET_BE2 is not set
# CONFIG_BE2NET_BE3 is not set
CONFIG_BE2NET_LANCER=y
CONFIG_BE2NET_SKYHAWK=y
# CONFIG_NET_VENDOR_EZCHIP is not set
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_GVE=m
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_HINIC=m
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
# CONFIG_E1000 is not set
CONFIG_E1000E=m
CONFIG_E1000E_HWTS=y
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
CONFIG_IGB_DCA=y
CONFIG_IGBVF=m
# CONFIG_IXGB is not set
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBE_IPSEC=y
CONFIG_IXGBEVF=m
CONFIG_IXGBEVF_IPSEC=y
CONFIG_I40E=m
CONFIG_I40E_DCB=y
CONFIG_IAVF=m
CONFIG_I40EVF=m
CONFIG_ICE=m
CONFIG_FM10K=m
CONFIG_IGC=m
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
# CONFIG_MLX4_CORE_GEN2 is not set
CONFIG_MLX5_CORE=m
CONFIG_MLX5_ACCEL=y
CONFIG_MLX5_FPGA=y
CONFIG_MLX5_CORE_EN=y
CONFIG_MLX5_EN_ARFS=y
CONFIG_MLX5_EN_RXNFC=y
CONFIG_MLX5_MPFS=y
CONFIG_MLX5_ESWITCH=y
CONFIG_MLX5_CORE_EN_DCB=y
CONFIG_MLX5_CORE_IPOIB=y
# CONFIG_MLX5_FPGA_IPSEC is not set
# CONFIG_MLX5_FPGA_TLS is not set
# CONFIG_MLX5_TLS is not set
CONFIG_MLX5_SW_STEERING=y
CONFIG_MLXSW_CORE=m
CONFIG_MLXSW_CORE_HWMON=y
CONFIG_MLXSW_CORE_THERMAL=y
CONFIG_MLXSW_PCI=m
CONFIG_MLXSW_I2C=m
CONFIG_MLXSW_SWITCHIB=m
CONFIG_MLXSW_SWITCHX2=m
CONFIG_MLXSW_SPECTRUM=m
CONFIG_MLXSW_SPECTRUM_DCB=y
CONFIG_MLXSW_MINIMAL=m
CONFIG_MLXFW=m
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETERION is not set
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NFP=m
CONFIG_NFP_APP_FLOWER=y
CONFIG_NFP_APP_ABM_NIC=y
# CONFIG_NFP_DEBUG is not set
# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_IONIC=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
# CONFIG_QLCNIC is not set
CONFIG_NETXEN_NIC=m
CONFIG_QED=m
CONFIG_QED_LL2=y
CONFIG_QED_SRIOV=y
CONFIG_QEDE=m
CONFIG_QED_RDMA=y
CONFIG_QED_ISCSI=y
CONFIG_QED_FCOE=y
CONFIG_QED_OOO=y
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
# CONFIG_NET_VENDOR_RENESAS is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_ROCKER=m
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
# CONFIG_SFC_FALCON is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_BCM_UNIMAC=m
CONFIG_MDIO_BITBANG=m
CONFIG_MDIO_CAVIUM=m
# CONFIG_MDIO_GPIO is not set
CONFIG_MDIO_MSCC_MIIM=m
CONFIG_MDIO_THUNDER=m
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
CONFIG_LED_TRIGGER_PHY=y
#
# MII PHY device drivers
#
# CONFIG_ADIN_PHY is not set
CONFIG_AMD_PHY=m
CONFIG_AQUANTIA_PHY=m
CONFIG_AX88796B_PHY=m
CONFIG_AT803X_PHY=m
CONFIG_BCM7XXX_PHY=m
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BROADCOM_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_CORTINA_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_DP83822_PHY=m
CONFIG_DP83TC811_PHY=m
CONFIG_DP83848_PHY=m
CONFIG_DP83867_PHY=m
CONFIG_FIXED_PHY=y
CONFIG_ICPLUS_PHY=m
CONFIG_INTEL_XWAY_PHY=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_LXT_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_MARVELL_10G_PHY=m
CONFIG_MICREL_PHY=m
CONFIG_MICROCHIP_PHY=m
CONFIG_MICROCHIP_T1_PHY=m
CONFIG_MICROSEMI_PHY=m
CONFIG_NATIONAL_PHY=m
# CONFIG_NXP_TJA11XX_PHY is not set
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_RENESAS_PHY=m
CONFIG_ROCKCHIP_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
CONFIG_TERANETICS_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_XILINX_GMII2RGMII=m
CONFIG_MICREL_KS8995MA=m
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
CONFIG_USB_LAN78XX=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET_ENABLE=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_USB_NET_CH9200=m
# CONFIG_USB_NET_AQC111 is not set
CONFIG_WLAN=y
# CONFIG_WLAN_VENDOR_ADMTEK is not set
CONFIG_ATH_COMMON=m
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_COMMON_DEBUG=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_DEBUGFS=y
# CONFIG_ATH9K_STATION_STATISTICS is not set
# CONFIG_ATH9K_DYNACK is not set
CONFIG_ATH9K_WOW=y
CONFIG_ATH9K_RFKILL=y
# CONFIG_ATH9K_CHANNEL_CONTEXT is not set
CONFIG_ATH9K_PCOEM=y
# CONFIG_ATH9K_PCI_NO_EEPROM is not set
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
# CONFIG_ATH9K_HWRNG is not set
# CONFIG_ATH9K_COMMON_SPECTRAL is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
CONFIG_ATH10K=m
CONFIG_ATH10K_CE=y
CONFIG_ATH10K_PCI=m
# CONFIG_ATH10K_SDIO is not set
# CONFIG_ATH10K_USB is not set
# CONFIG_ATH10K_DEBUG is not set
CONFIG_ATH10K_DEBUGFS=y
# CONFIG_ATH10K_SPECTRAL is not set
# CONFIG_ATH10K_TRACING is not set
# CONFIG_WCN36XX is not set
# CONFIG_WLAN_VENDOR_ATMEL is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_PROTO_BCDC=y
CONFIG_BRCMFMAC_PROTO_MSGBUF=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCMFMAC_PCIE=y
# CONFIG_BRCM_TRACING is not set
# CONFIG_BRCMDBG is not set
# CONFIG_WLAN_VENDOR_CISCO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=m
CONFIG_IWLMVM=m
CONFIG_IWLWIFI_OPMODE_MODULAR=y
# CONFIG_IWLWIFI_BCAST_FILTERING is not set
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWLWIFI_DEBUGFS=y
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
# end of Debugging Options
# CONFIG_WLAN_VENDOR_INTERSIL is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
CONFIG_MWIFIEX_USB=m
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT7601U=m
CONFIG_MT76_CORE=m
CONFIG_MT76_LEDS=y
CONFIG_MT76_USB=m
CONFIG_MT76x02_LIB=m
CONFIG_MT76x02_USB=m
CONFIG_MT76x0_COMMON=m
CONFIG_MT76x0U=m
CONFIG_MT76x0E=m
CONFIG_MT76x2_COMMON=m
CONFIG_MT76x2E=m
CONFIG_MT76x2U=m
# CONFIG_MT7603E is not set
# CONFIG_MT7615E is not set
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
# CONFIG_RT2400PCI is not set
# CONFIG_RT2500PCI is not set
# CONFIG_RT61PCI is not set
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
# CONFIG_RT2500USB is not set
# CONFIG_RT73USB is not set
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2X00_LIB_DEBUGFS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8723AE=m
CONFIG_RTL8723BE=m
CONFIG_RTL8188EE=m
CONFIG_RTL8192EE=m
CONFIG_RTL8821AE=m
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_PCI=m
CONFIG_RTLWIFI_USB=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
CONFIG_RTL8723_COMMON=m
CONFIG_RTLBTCOEXIST=m
CONFIG_RTL8XXXU=m
# CONFIG_RTL8XXXU_UNTESTED is not set
CONFIG_RTW88=m
CONFIG_RTW88_CORE=m
CONFIG_RTW88_PCI=m
CONFIG_RTW88_8822BE=y
CONFIG_RTW88_8822CE=y
# CONFIG_RTW88_DEBUG is not set
# CONFIG_RTW88_DEBUGFS is not set
# CONFIG_WLAN_VENDOR_RSI is not set
# CONFIG_WLAN_VENDOR_ST is not set
# CONFIG_WLAN_VENDOR_TI is not set
# CONFIG_WLAN_VENDOR_ZYDAS is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not set
CONFIG_MAC80211_HWSIM=m
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_VIRT_WIFI is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
# CONFIG_SBNI is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ATUSB is not set
# CONFIG_IEEE802154_ADF7242 is not set
# CONFIG_IEEE802154_CA8210 is not set
# CONFIG_IEEE802154_MCR20A is not set
# CONFIG_IEEE802154_HWSIM is not set
CONFIG_XEN_NETDEV_FRONTEND=m
CONFIG_VMXNET3=m
CONFIG_FUJITSU_ES=m
CONFIG_THUNDERBOLT_NET=m
CONFIG_HYPERV_NET=m
CONFIG_NETDEVSIM=m
CONFIG_NET_FAILOVER=m
# CONFIG_ISDN is not set
# CONFIG_NVM is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_APPLESPI is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_VMMOUSE=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_USB_PEGASUS is not set
CONFIG_TABLET_SERIAL_WACOM4=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ADC is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_BU21029 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_EXC3000 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_HIDEEP is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_S6SY761 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
# CONFIG_TOUCHSCREEN_IQS5XX is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MSM_VIBRATOR is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_GP2A=m
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_GPIO_VIBRA is not set
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_PWM_VIBRA is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
CONFIG_RMI4_CORE=m
CONFIG_RMI4_I2C=m
CONFIG_RMI4_SPI=m
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
# CONFIG_RMI4_F54 is not set
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
# CONFIG_ISI is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
# CONFIG_NULL_TTY is not set
CONFIG_LDISC_AUTOLOAD=y
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_KGDB_NMI is not set
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_DEV_BUS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_NVRAM=y
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TCG_XEN is not set
CONFIG_TCG_CRB=y
# CONFIG_TCG_VTPM_PROXY is not set
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
# end of Character devices
# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_AMD_MP2 is not set
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#
CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=m
# end of I2C Hardware Bus support
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_DP83640_PHY=m
CONFIG_PTP_1588_CLOCK_KVM=m
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AMD=m
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SX150X is not set
CONFIG_PINCTRL_BAYTRAIL=y
# CONFIG_PINCTRL_CHERRYVIEW is not set
CONFIG_PINCTRL_INTEL=m
CONFIG_PINCTRL_BROXTON=m
CONFIG_PINCTRL_CANNONLAKE=m
CONFIG_PINCTRL_CEDARFORK=m
CONFIG_PINCTRL_DENVERTON=m
CONFIG_PINCTRL_GEMINILAKE=m
CONFIG_PINCTRL_ICELAKE=m
CONFIG_PINCTRL_LEWISBURG=m
CONFIG_PINCTRL_SUNRISEPOINT=m
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=m
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_AMDPT=m
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_ICH=m
# CONFIG_GPIO_LYNXPOINT is not set
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers
#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders
#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders
#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=m
# end of USB GPIO expanders
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_SMB347=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_AS370 is not set
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ASPEED is not set
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_IIO_HWMON is not set
CONFIG_SENSORS_I5500=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_MLXREG_FAN is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_IBM_CFFPS is not set
# CONFIG_SENSORS_INSPUR_IPSPS is not set
# CONFIG_SENSORS_IR35221 is not set
# CONFIG_SENSORS_IR38064 is not set
# CONFIG_SENSORS_IRPS5401 is not set
# CONFIG_SENSORS_ISL68137 is not set
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC3815 is not set
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX20751 is not set
# CONFIG_SENSORS_MAX31785 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_PXE1610 is not set
# CONFIG_SENSORS_TPS40422 is not set
# CONFIG_SENSORS_TPS53679 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_XGENE is not set
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_PKG_TEMP_THERMAL=m
CONFIG_INTEL_SOC_DTS_IOSF_CORE=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
CONFIG_INT340X_THERMAL=m
CONFIG_ACPI_THERMAL_REL=m
# CONFIG_INT3406_THERMAL is not set
CONFIG_PROC_THERMAL_MMIO_RAPL=y
# end of ACPI INT340X thermal drivers
# CONFIG_INTEL_PCH_THERMAL is not set
# end of Intel thermal drivers
# CONFIG_GENERIC_ADC_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_WDAT_WDT=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_MLX_WDT is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_EBC_C384_WDT is not set
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_TQMX86_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
CONFIG_INTEL_MEI_WDT=m
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
# CONFIG_MEN_A21_WDT is not set
CONFIG_XEN_WDT=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
CONFIG_MFD_INTEL_LPSS_PCI=y
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not set
CONFIG_CEC_CORE=m
# CONFIG_RC_CORE is not set
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_MEDIA_CONTROLLER_DVB=y
CONFIG_VIDEO_DEV=m
# CONFIG_VIDEO_V4L2_SUBDEV_API is not set
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L2_I2C=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_DVB_CORE=m
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set
#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
# CONFIG_USB_GSPCA_DTCS033 is not set
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
# CONFIG_USB_GSPCA_KINECT is not set
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
# CONFIG_USB_GSPCA_STK1135 is not set
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
# CONFIG_USB_GSPCA_TOUPTEK is not set
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
# CONFIG_VIDEO_USBTV is not set
#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
# CONFIG_VIDEO_STK1160_COMMON is not set
# CONFIG_VIDEO_GO7007 is not set
#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
#
# Digital TV USB devices
#
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
# CONFIG_DVB_USB_DVBSKY is not set
# CONFIG_DVB_USB_ZD1301 is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
# CONFIG_DVB_AS102 is not set
#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_V4L2 is not set
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
#
# USB HDMI CEC adapters
#
CONFIG_USB_PULSE8_CEC=m
CONFIG_USB_RAINSHADOW_CEC=m
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
# CONFIG_VIDEO_MEYE is not set
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW5864 is not set
# CONFIG_VIDEO_TW68 is not set
# CONFIG_VIDEO_TW686X is not set
#
# Media capture/analog TV support
#
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DT3155 is not set
#
# Media capture/analog/hybrid TV support
#
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m
#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not set
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set
# CONFIG_DVB_NETUP_UNIDVB is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
CONFIG_CEC_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_SECO_CEC is not set
#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set
#
# Texas Instruments WL128x FM driver (ST based)
#
# end of Texas Instruments WL128x FM driver (ST based)
#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
# CONFIG_SMS_SIANO_DEBUGFS is not set
#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_HIDE_ANCILLARY_SUBDRV=y
CONFIG_MEDIA_ATTACH=y
#
# I2C drivers hidden by 'Autoselect ancillary drivers'
#
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m
#
# Video and audio decoders
#
CONFIG_VIDEO_CX25840=m
#
# Video encoders
#
#
# Camera sensor devices
#
#
# Lens drivers
#
#
# Flash devices
#
#
# Video improvement chips
#
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m
#
# SDR tuner chips
#
#
# Miscellaneous helper chips
#
#
# SPI drivers hidden by 'Autoselect ancillary drivers'
#
#
# Media SPI Adapters
#
# CONFIG_CXD2880_SPI_DRV is not set
# end of Media SPI Adapters
CONFIG_MEDIA_TUNER=m
#
# Tuner drivers hidden by 'Autoselect ancillary drivers'
#
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
#
# DVB Frontend drivers hidden by 'Autoselect ancillary drivers'
#
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_M88DS3103=m
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_TDA10071=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_SI2168=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_MB86A20S=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBH25=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_AF9033=m
#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=m
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_VM=y
CONFIG_DRM_SCHED=m
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
# end of ARM devices
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_USERPTR=y
CONFIG_DRM_AMDGPU=m
# CONFIG_DRM_AMDGPU_SI is not set
# CONFIG_DRM_AMDGPU_CIK is not set
# CONFIG_DRM_AMDGPU_USERPTR is not set
# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
#
# ACP (Audio CoProcessor) Configuration
#
CONFIG_DRM_AMD_ACP=y
# end of ACP (Audio CoProcessor) Configuration
#
# Display Engine Configuration
#
CONFIG_DRM_AMD_DC=y
CONFIG_DRM_AMD_DC_DCN1_0=y
CONFIG_DRM_AMD_DC_DCN2_0=y
CONFIG_DRM_AMD_DC_DCN2_1=y
CONFIG_DRM_AMD_DC_DSC_SUPPORT=y
# CONFIG_DEBUG_KERNEL_DC is not set
# end of Display Engine Configuration
CONFIG_HSA_AMD=y
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=y
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
# CONFIG_NOUVEAU_DEBUG_MMU is not set
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_ALPHA_SUPPORT is not set
CONFIG_DRM_I915_FORCE_PROBE=""
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
CONFIG_DRM_I915_GVT=y
CONFIG_DRM_I915_GVT_KVMGT=m
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
CONFIG_DRM_I915_SPIN_REQUEST=5
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
CONFIG_DRM_ATI_PCIGART=y
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_QXL=m
CONFIG_DRM_BOCHS=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# end of Display Interface Bridges
# CONFIG_DRM_ETNAVIV is not set
CONFIG_DRM_GM12U320=m
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
# CONFIG_TINYDRM_ST7735R is not set
# CONFIG_DRM_XEN is not set
# CONFIG_DRM_VBOXVIDEO is not set
CONFIG_DRM_LEGACY=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
# CONFIG_LCD_OTM3225A is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=m
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_PCM_ELD=y
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_SEQUENCER_OSS=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_SEQ_MIDI_EMUL=m
CONFIG_SND_SEQ_VIRMIDI=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL3_LIB_SEQ=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not set
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=m
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
# CONFIG_SND_YMFPCI is not set
#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_INTEL_DETECT_DMIC=y
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# end of HD-Audio
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_EXT_CORE=m
CONFIG_SND_HDA_PREALLOC_SIZE=512
CONFIG_SND_INTEL_NHLT=m
# CONFIG_SND_SPI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_HIFACE=m
CONFIG_SND_BCD2000=m
CONFIG_SND_USB_LINE6=m
CONFIG_SND_USB_POD=m
CONFIG_SND_USB_PODHD=m
CONFIG_SND_USB_TONEPORT=m
CONFIG_SND_USB_VARIAX=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
CONFIG_SND_DICE=m
CONFIG_SND_OXFW=m
CONFIG_SND_ISIGHT=m
CONFIG_SND_FIREWORKS=m
CONFIG_SND_BEBOB=m
CONFIG_SND_FIREWIRE_DIGI00X=m
CONFIG_SND_FIREWIRE_TASCAM=m
CONFIG_SND_FIREWIRE_MOTU=m
CONFIG_SND_FIREFACE=m
CONFIG_SND_SOC=m
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_TOPOLOGY=y
CONFIG_SND_SOC_ACPI=m
# CONFIG_SND_SOC_AMD_ACP is not set
# CONFIG_SND_SOC_AMD_ACP3x is not set
# CONFIG_SND_ATMEL_SOC is not set
# CONFIG_SND_DESIGNWARE_I2S is not set
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
# CONFIG_SND_SOC_FSL_SAI is not set
# CONFIG_SND_SOC_FSL_AUDMIX is not set
# CONFIG_SND_SOC_FSL_SSI is not set
# CONFIG_SND_SOC_FSL_SPDIF is not set
# CONFIG_SND_SOC_FSL_ESAI is not set
# CONFIG_SND_SOC_FSL_MICFIL is not set
# CONFIG_SND_SOC_IMX_AUDMUX is not set
# end of SoC Audio for Freescale CPUs
# CONFIG_SND_I2S_HI6210_I2S is not set
# CONFIG_SND_SOC_IMG is not set
CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
CONFIG_SND_SST_IPC=m
CONFIG_SND_SST_IPC_ACPI=m
CONFIG_SND_SOC_INTEL_SST_ACPI=m
CONFIG_SND_SOC_INTEL_SST=m
CONFIG_SND_SOC_INTEL_SST_FIRMWARE=m
CONFIG_SND_SOC_INTEL_HASWELL=m
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=m
# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI is not set
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=m
CONFIG_SND_SOC_INTEL_SKYLAKE=m
CONFIG_SND_SOC_INTEL_SKL=m
CONFIG_SND_SOC_INTEL_APL=m
CONFIG_SND_SOC_INTEL_KBL=m
CONFIG_SND_SOC_INTEL_GLK=m
CONFIG_SND_SOC_INTEL_CNL=m
CONFIG_SND_SOC_INTEL_CFL=m
# CONFIG_SND_SOC_INTEL_CML_H is not set
# CONFIG_SND_SOC_INTEL_CML_LP is not set
CONFIG_SND_SOC_INTEL_SKYLAKE_FAMILY=m
CONFIG_SND_SOC_INTEL_SKYLAKE_SSP_CLK=m
CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC=y
CONFIG_SND_SOC_INTEL_SKYLAKE_COMMON=m
CONFIG_SND_SOC_ACPI_INTEL_MATCH=m
CONFIG_SND_SOC_INTEL_MACH=y
# CONFIG_SND_SOC_INTEL_HASWELL_MACH is not set
# CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH is not set
# CONFIG_SND_SOC_INTEL_BROADWELL_MACH is not set
CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH=m
# CONFIG_SND_SOC_INTEL_BYT_CHT_CX2072X_MACH is not set
CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=m
CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=m
CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m
CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m
CONFIG_SND_SOC_INTEL_DA7219_MAX98357A_GENERIC=m
CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=m
CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m
CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH=m
CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH=m
CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH=m
CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH=m
CONFIG_SND_SOC_INTEL_KBL_RT5660_MACH=m
CONFIG_SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH=m
CONFIG_SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH=m
# CONFIG_SND_SOC_MTK_BTCVSD is not set
# CONFIG_SND_SOC_SOF_TOPLEVEL is not set
#
# STMicroelectronics STM32 SOC audio support
#
# end of STMicroelectronics STM32 SOC audio support
# CONFIG_SND_SOC_XILINX_I2S is not set
# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set
# CONFIG_SND_SOC_XILINX_SPDIF is not set
# CONFIG_SND_SOC_XTFPGA_I2S is not set
# CONFIG_ZX_TDM is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
#
# CODEC drivers
#
# CONFIG_SND_SOC_AC97_CODEC is not set
# CONFIG_SND_SOC_ADAU1701 is not set
# CONFIG_SND_SOC_ADAU1761_I2C is not set
# CONFIG_SND_SOC_ADAU1761_SPI is not set
# CONFIG_SND_SOC_ADAU7002 is not set
# CONFIG_SND_SOC_AK4104 is not set
# CONFIG_SND_SOC_AK4118 is not set
# CONFIG_SND_SOC_AK4458 is not set
# CONFIG_SND_SOC_AK4554 is not set
# CONFIG_SND_SOC_AK4613 is not set
# CONFIG_SND_SOC_AK4642 is not set
# CONFIG_SND_SOC_AK5386 is not set
# CONFIG_SND_SOC_AK5558 is not set
# CONFIG_SND_SOC_ALC5623 is not set
# CONFIG_SND_SOC_BD28623 is not set
# CONFIG_SND_SOC_BT_SCO is not set
# CONFIG_SND_SOC_CS35L32 is not set
# CONFIG_SND_SOC_CS35L33 is not set
# CONFIG_SND_SOC_CS35L34 is not set
# CONFIG_SND_SOC_CS35L35 is not set
# CONFIG_SND_SOC_CS35L36 is not set
# CONFIG_SND_SOC_CS42L42 is not set
# CONFIG_SND_SOC_CS42L51_I2C is not set
# CONFIG_SND_SOC_CS42L52 is not set
# CONFIG_SND_SOC_CS42L56 is not set
# CONFIG_SND_SOC_CS42L73 is not set
# CONFIG_SND_SOC_CS4265 is not set
# CONFIG_SND_SOC_CS4270 is not set
# CONFIG_SND_SOC_CS4271_I2C is not set
# CONFIG_SND_SOC_CS4271_SPI is not set
# CONFIG_SND_SOC_CS42XX8_I2C is not set
# CONFIG_SND_SOC_CS43130 is not set
# CONFIG_SND_SOC_CS4341 is not set
# CONFIG_SND_SOC_CS4349 is not set
# CONFIG_SND_SOC_CS53L30 is not set
# CONFIG_SND_SOC_CX2072X is not set
CONFIG_SND_SOC_DA7213=m
CONFIG_SND_SOC_DA7219=m
CONFIG_SND_SOC_DMIC=m
# CONFIG_SND_SOC_ES7134 is not set
# CONFIG_SND_SOC_ES7241 is not set
CONFIG_SND_SOC_ES8316=m
# CONFIG_SND_SOC_ES8328_I2C is not set
# CONFIG_SND_SOC_ES8328_SPI is not set
# CONFIG_SND_SOC_GTM601 is not set
CONFIG_SND_SOC_HDAC_HDMI=m
CONFIG_SND_SOC_HDAC_HDA=m
# CONFIG_SND_SOC_INNO_RK3036 is not set
# CONFIG_SND_SOC_MAX98088 is not set
CONFIG_SND_SOC_MAX98090=m
CONFIG_SND_SOC_MAX98357A=m
# CONFIG_SND_SOC_MAX98504 is not set
# CONFIG_SND_SOC_MAX9867 is not set
CONFIG_SND_SOC_MAX98927=m
CONFIG_SND_SOC_MAX98373=m
# CONFIG_SND_SOC_MAX9860 is not set
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
# CONFIG_SND_SOC_PCM1681 is not set
# CONFIG_SND_SOC_PCM1789_I2C is not set
# CONFIG_SND_SOC_PCM179X_I2C is not set
# CONFIG_SND_SOC_PCM179X_SPI is not set
# CONFIG_SND_SOC_PCM186X_I2C is not set
# CONFIG_SND_SOC_PCM186X_SPI is not set
# CONFIG_SND_SOC_PCM3060_I2C is not set
# CONFIG_SND_SOC_PCM3060_SPI is not set
# CONFIG_SND_SOC_PCM3168A_I2C is not set
# CONFIG_SND_SOC_PCM3168A_SPI is not set
# CONFIG_SND_SOC_PCM512x_I2C is not set
# CONFIG_SND_SOC_PCM512x_SPI is not set
# CONFIG_SND_SOC_RK3328 is not set
CONFIG_SND_SOC_RL6231=m
CONFIG_SND_SOC_RL6347A=m
CONFIG_SND_SOC_RT286=m
CONFIG_SND_SOC_RT298=m
CONFIG_SND_SOC_RT5514=m
CONFIG_SND_SOC_RT5514_SPI=m
# CONFIG_SND_SOC_RT5616 is not set
# CONFIG_SND_SOC_RT5631 is not set
CONFIG_SND_SOC_RT5640=m
CONFIG_SND_SOC_RT5645=m
CONFIG_SND_SOC_RT5651=m
CONFIG_SND_SOC_RT5660=m
CONFIG_SND_SOC_RT5663=m
CONFIG_SND_SOC_RT5670=m
CONFIG_SND_SOC_RT5682=m
# CONFIG_SND_SOC_SGTL5000 is not set
# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set
# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
# CONFIG_SND_SOC_SPDIF is not set
# CONFIG_SND_SOC_SSM2305 is not set
# CONFIG_SND_SOC_SSM2602_SPI is not set
# CONFIG_SND_SOC_SSM2602_I2C is not set
CONFIG_SND_SOC_SSM4567=m
# CONFIG_SND_SOC_STA32X is not set
# CONFIG_SND_SOC_STA350 is not set
# CONFIG_SND_SOC_STI_SAS is not set
# CONFIG_SND_SOC_TAS2552 is not set
# CONFIG_SND_SOC_TAS5086 is not set
# CONFIG_SND_SOC_TAS571X is not set
# CONFIG_SND_SOC_TAS5720 is not set
# CONFIG_SND_SOC_TAS6424 is not set
# CONFIG_SND_SOC_TDA7419 is not set
# CONFIG_SND_SOC_TFA9879 is not set
# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
# CONFIG_SND_SOC_TLV320AIC31XX is not set
# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set
# CONFIG_SND_SOC_TLV320AIC3X is not set
CONFIG_SND_SOC_TS3A227E=m
# CONFIG_SND_SOC_TSCS42XX is not set
# CONFIG_SND_SOC_TSCS454 is not set
# CONFIG_SND_SOC_UDA1334 is not set
# CONFIG_SND_SOC_WM8510 is not set
# CONFIG_SND_SOC_WM8523 is not set
# CONFIG_SND_SOC_WM8524 is not set
# CONFIG_SND_SOC_WM8580 is not set
# CONFIG_SND_SOC_WM8711 is not set
# CONFIG_SND_SOC_WM8728 is not set
# CONFIG_SND_SOC_WM8731 is not set
# CONFIG_SND_SOC_WM8737 is not set
# CONFIG_SND_SOC_WM8741 is not set
# CONFIG_SND_SOC_WM8750 is not set
# CONFIG_SND_SOC_WM8753 is not set
# CONFIG_SND_SOC_WM8770 is not set
# CONFIG_SND_SOC_WM8776 is not set
# CONFIG_SND_SOC_WM8782 is not set
# CONFIG_SND_SOC_WM8804_I2C is not set
# CONFIG_SND_SOC_WM8804_SPI is not set
# CONFIG_SND_SOC_WM8903 is not set
# CONFIG_SND_SOC_WM8904 is not set
# CONFIG_SND_SOC_WM8960 is not set
# CONFIG_SND_SOC_WM8962 is not set
# CONFIG_SND_SOC_WM8974 is not set
# CONFIG_SND_SOC_WM8978 is not set
# CONFIG_SND_SOC_WM8985 is not set
# CONFIG_SND_SOC_ZX_AUD96P22 is not set
# CONFIG_SND_SOC_MAX9759 is not set
# CONFIG_SND_SOC_MT6351 is not set
# CONFIG_SND_SOC_MT6358 is not set
# CONFIG_SND_SOC_NAU8540 is not set
# CONFIG_SND_SOC_NAU8810 is not set
# CONFIG_SND_SOC_NAU8822 is not set
CONFIG_SND_SOC_NAU8824=m
CONFIG_SND_SOC_NAU8825=m
# CONFIG_SND_SOC_TPA6130A2 is not set
# end of CODEC drivers
# CONFIG_SND_SIMPLE_CARD is not set
CONFIG_SND_X86=y
CONFIG_HDMI_LPE_AUDIO=m
CONFIG_SND_SYNTH_EMUX=m
# CONFIG_SND_XEN_FRONTEND is not set
CONFIG_AC97_BUS=m
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=m
CONFIG_HID_APPLEIR=m
CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
CONFIG_HID_BETOP_FF=m
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CORSAIR=m
CONFIG_HID_COUGAR=m
# CONFIG_HID_MACALLY is not set
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CMEDIA=m
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELAN=m
CONFIG_HID_ELECOM=m
CONFIG_HID_ELO=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
CONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not set
CONFIG_HID_GT683R=m
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
# CONFIG_HID_VIEWSONIC is not set
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=m
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTI=m
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PENMOUNT=m
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PRIMAX=m
# CONFIG_HID_RETRODE is not set
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
CONFIG_HID_ALPS=m
# end of Special HID drivers
#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
# end of USB HID support
#
# I2C HID support
#
CONFIG_I2C_HID=m
# end of I2C HID support
#
# Intel ISH HID support
#
CONFIG_INTEL_ISH_HID=m
# CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER is not set
# end of Intel ISH HID support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=m
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DBGCAP=y
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_CDNS3 is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
CONFIG_USB_SERIAL_F8153X=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MXUPORT=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_UPD78F0730=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=m
# CONFIG_USB_HUB_USB251XB is not set
CONFIG_USB_HSIC_USB3503=m
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not set
CONFIG_TYPEC=y
# CONFIG_TYPEC_TCPM is not set
CONFIG_TYPEC_UCSI=y
# CONFIG_UCSI_CCG is not set
CONFIG_UCSI_ACPI=y
# CONFIG_TYPEC_TPS6598X is not set
#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
# CONFIG_TYPEC_MUX_PI3USB30532 is not set
# end of USB Type-C Multiplexer/DeMultiplexer Switch support
#
# USB Type-C Alternate Mode drivers
#
CONFIG_TYPEC_DP_ALTMODE=m
# CONFIG_TYPEC_NVIDIA_ALTMODE is not set
# end of USB Type-C Alternate Mode drivers
CONFIG_USB_ROLE_SWITCH=m
CONFIG_USB_ROLES_INTEL_XHCI=m
CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_SPI is not set
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_REALTEK_PCI=m
CONFIG_MMC_REALTEK_USB=m
CONFIG_MMC_CQHCI=m
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_SDHCI_XENON is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_MEMSTICK_REALTEK_PCI=m
CONFIG_MEMSTICK_REALTEK_USB=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
# CONFIG_LEDS_APU is not set
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_LP8501 is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_MLXCPLD=m
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_DISK=y
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
# CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI is not set
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
# CONFIG_INFINIBAND_MTHCA is not set
# CONFIG_INFINIBAND_QIB is not set
CONFIG_INFINIBAND_CXGB4=m
CONFIG_INFINIBAND_EFA=m
CONFIG_INFINIBAND_I40IW=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_MLX5_INFINIBAND=m
# CONFIG_INFINIBAND_OCRDMA is not set
CONFIG_INFINIBAND_VMWARE_PVRDMA=m
CONFIG_INFINIBAND_USNIC=m
CONFIG_INFINIBAND_BNXT_RE=m
CONFIG_INFINIBAND_HFI1=m
# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set
# CONFIG_SDMA_VERBOSITY is not set
CONFIG_INFINIBAND_QEDR=m
CONFIG_INFINIBAND_RDMAVT=m
CONFIG_RDMA_RXE=m
CONFIG_RDMA_SIW=m
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISER=m
CONFIG_INFINIBAND_ISERT=m
CONFIG_INFINIBAND_OPA_VNIC=m
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
CONFIG_EDAC_GHES=y
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_IE31200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
CONFIG_EDAC_SKX=m
CONFIG_EDAC_I10NM=m
CONFIG_EDAC_PND2=m
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RX4581=m
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_DS3232_HWMON=y
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=m
# CONFIG_RTC_DRV_RV3029_HWMON is not set
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not set
CONFIG_INTEL_IDMA64=m
CONFIG_INTEL_IOATDMA=m
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=y
# CONFIG_DW_EDMA is not set
# CONFIG_DW_EDMA_PCIE is not set
CONFIG_HSU_DMA=y
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_SELFTESTS is not set
# end of DMABUF options
CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
# CONFIG_PANEL is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
CONFIG_UIO_HV_GENERIC=m
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
# CONFIG_VFIO_PCI_IGD is not set
CONFIG_VFIO_MDEV=m
CONFIG_VFIO_MDEV_DEVICE=m
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_PMEM is not set
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_INPUT=m
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_TIMER=y
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m
# end of Microsoft Hyper-V guest support
#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set
CONFIG_XEN_SCRUB_PAGES_DEFAULT=y
CONFIG_XEN_DEV_EVTCHN=m
# CONFIG_XEN_BACKEND is not set
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
# CONFIG_XEN_GRANT_DMA_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
# CONFIG_XEN_PVCALLS_FRONTEND is not set
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
# end of Xen driver support
# CONFIG_GREYBUS is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
# CONFIG_ACER_WIRELESS is not set
# CONFIG_ACERHDF is not set
# CONFIG_ALIENWARE_WMI is not set
CONFIG_ASUS_LAPTOP=m
CONFIG_DCDBAS=m
CONFIG_DELL_SMBIOS=m
CONFIG_DELL_SMBIOS_WMI=y
# CONFIG_DELL_SMBIOS_SMM is not set
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=m
CONFIG_DELL_WMI_DESCRIPTOR=m
CONFIG_DELL_WMI_AIO=m
CONFIG_DELL_WMI_LED=m
CONFIG_DELL_SMO8800=m
CONFIG_DELL_RBTN=m
CONFIG_DELL_RBU=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
CONFIG_AMILO_RFKILL=m
# CONFIG_GPD_POCKET_FAN is not set
CONFIG_HP_ACCEL=m
CONFIG_HP_WIRELESS=m
CONFIG_HP_WMI=m
# CONFIG_LG_LAPTOP is not set
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=m
# CONFIG_SURFACE3_WMI is not set
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ACPI_WMI=m
CONFIG_WMI_BMOF=m
CONFIG_INTEL_WMI_THUNDERBOLT=m
# CONFIG_XIAOMI_WMI is not set
CONFIG_MSI_WMI=m
# CONFIG_PEAQ_WMI is not set
CONFIG_TOPSTAR_LAPTOP=m
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=m
# CONFIG_INTEL_INT0002_VGPIO is not set
CONFIG_INTEL_HID_EVENT=m
CONFIG_INTEL_VBTN=m
CONFIG_INTEL_IPS=m
CONFIG_INTEL_PMC_CORE=m
# CONFIG_IBM_RTL is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_SAMSUNG_Q10=m
CONFIG_APPLE_GMUX=m
CONFIG_INTEL_RST=m
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
CONFIG_MLX_PLATFORM=m
CONFIG_INTEL_TURBO_MAX_3=y
# CONFIG_I2C_MULTI_INSTANTIATE is not set
# CONFIG_INTEL_ATOMISP2_PM is not set
# CONFIG_HUAWEI_WMI is not set
# CONFIG_PCENGINES_APU2 is not set
#
# Intel Speed Select Technology interface support
#
CONFIG_INTEL_SPEED_SELECT_INTERFACE=m
# end of Intel Speed Select Technology interface support
CONFIG_PMC_ATOM=y
# CONFIG_MFD_CROS_EC is not set
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=m
CONFIG_MLXREG_IO=m
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_PWM is not set
# end of Common Clock Framework
CONFIG_HWSPINLOCK=y
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers
CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_V2=m
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y
CONFIG_HYPERV_IOMMU=y
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Aspeed SoC drivers
#
# end of Aspeed SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
# CONFIG_IIO_BUFFER_CB is not set
# CONFIG_IIO_BUFFER_HW_CONSUMER is not set
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
# CONFIG_IIO_CONFIGFS is not set
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
# CONFIG_IIO_SW_DEVICE is not set
# CONFIG_IIO_SW_TRIGGER is not set
#
# Accelerometers
#
# CONFIG_ADIS16201 is not set
# CONFIG_ADIS16209 is not set
# CONFIG_ADXL345_I2C is not set
# CONFIG_ADXL345_SPI is not set
# CONFIG_ADXL372_SPI is not set
# CONFIG_ADXL372_I2C is not set
# CONFIG_BMA180 is not set
# CONFIG_BMA220 is not set
# CONFIG_BMC150_ACCEL is not set
# CONFIG_DA280 is not set
# CONFIG_DA311 is not set
# CONFIG_DMARD09 is not set
# CONFIG_DMARD10 is not set
CONFIG_HID_SENSOR_ACCEL_3D=m
# CONFIG_IIO_ST_ACCEL_3AXIS is not set
# CONFIG_KXSD9 is not set
# CONFIG_KXCJK1013 is not set
# CONFIG_MC3230 is not set
# CONFIG_MMA7455_I2C is not set
# CONFIG_MMA7455_SPI is not set
# CONFIG_MMA7660 is not set
# CONFIG_MMA8452 is not set
# CONFIG_MMA9551 is not set
# CONFIG_MMA9553 is not set
# CONFIG_MXC4005 is not set
# CONFIG_MXC6255 is not set
# CONFIG_SCA3000 is not set
# CONFIG_STK8312 is not set
# CONFIG_STK8BA50 is not set
# end of Accelerometers
#
# Analog to digital converters
#
# CONFIG_AD7124 is not set
# CONFIG_AD7266 is not set
# CONFIG_AD7291 is not set
# CONFIG_AD7298 is not set
# CONFIG_AD7476 is not set
# CONFIG_AD7606_IFACE_PARALLEL is not set
# CONFIG_AD7606_IFACE_SPI is not set
# CONFIG_AD7766 is not set
# CONFIG_AD7768_1 is not set
# CONFIG_AD7780 is not set
# CONFIG_AD7791 is not set
# CONFIG_AD7793 is not set
# CONFIG_AD7887 is not set
# CONFIG_AD7923 is not set
# CONFIG_AD7949 is not set
# CONFIG_AD799X is not set
# CONFIG_HI8435 is not set
# CONFIG_HX711 is not set
# CONFIG_INA2XX_ADC is not set
# CONFIG_LTC2471 is not set
# CONFIG_LTC2485 is not set
# CONFIG_LTC2497 is not set
# CONFIG_MAX1027 is not set
# CONFIG_MAX11100 is not set
# CONFIG_MAX1118 is not set
# CONFIG_MAX1363 is not set
# CONFIG_MAX9611 is not set
# CONFIG_MCP320X is not set
# CONFIG_MCP3422 is not set
# CONFIG_MCP3911 is not set
# CONFIG_NAU7802 is not set
# CONFIG_TI_ADC081C is not set
# CONFIG_TI_ADC0832 is not set
# CONFIG_TI_ADC084S021 is not set
# CONFIG_TI_ADC12138 is not set
# CONFIG_TI_ADC108S102 is not set
# CONFIG_TI_ADC128S052 is not set
# CONFIG_TI_ADC161S626 is not set
# CONFIG_TI_ADS1015 is not set
# CONFIG_TI_ADS7950 is not set
# CONFIG_TI_TLC4541 is not set
# CONFIG_VIPERBOARD_ADC is not set
# CONFIG_XILINX_XADC is not set
# end of Analog to digital converters
#
# Analog Front Ends
#
# end of Analog Front Ends
#
# Amplifiers
#
# CONFIG_AD8366 is not set
# end of Amplifiers
#
# Chemical Sensors
#
# CONFIG_ATLAS_PH_SENSOR is not set
# CONFIG_BME680 is not set
# CONFIG_CCS811 is not set
# CONFIG_IAQCORE is not set
# CONFIG_SENSIRION_SGP30 is not set
# CONFIG_SPS30 is not set
# CONFIG_VZ89X is not set
# end of Chemical Sensors
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
# end of Hid Sensor IIO Common
#
# SSP Sensor Common
#
# CONFIG_IIO_SSP_SENSORHUB is not set
# end of SSP Sensor Common
#
# Digital to analog converters
#
# CONFIG_AD5064 is not set
# CONFIG_AD5360 is not set
# CONFIG_AD5380 is not set
# CONFIG_AD5421 is not set
# CONFIG_AD5446 is not set
# CONFIG_AD5449 is not set
# CONFIG_AD5592R is not set
# CONFIG_AD5593R is not set
# CONFIG_AD5504 is not set
# CONFIG_AD5624R_SPI is not set
# CONFIG_LTC1660 is not set
# CONFIG_LTC2632 is not set
# CONFIG_AD5686_SPI is not set
# CONFIG_AD5696_I2C is not set
# CONFIG_AD5755 is not set
# CONFIG_AD5758 is not set
# CONFIG_AD5761 is not set
# CONFIG_AD5764 is not set
# CONFIG_AD5791 is not set
# CONFIG_AD7303 is not set
# CONFIG_AD8801 is not set
# CONFIG_DS4424 is not set
# CONFIG_M62332 is not set
# CONFIG_MAX517 is not set
# CONFIG_MCP4725 is not set
# CONFIG_MCP4922 is not set
# CONFIG_TI_DAC082S085 is not set
# CONFIG_TI_DAC5571 is not set
# CONFIG_TI_DAC7311 is not set
# CONFIG_TI_DAC7612 is not set
# end of Digital to analog converters
#
# IIO dummy driver
#
# end of IIO dummy driver
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
# CONFIG_AD9523 is not set
# end of Clock Generator/Distribution
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# CONFIG_ADF4350 is not set
# CONFIG_ADF4371 is not set
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL
#
# Digital gyroscope sensors
#
# CONFIG_ADIS16080 is not set
# CONFIG_ADIS16130 is not set
# CONFIG_ADIS16136 is not set
# CONFIG_ADIS16260 is not set
# CONFIG_ADXRS450 is not set
# CONFIG_BMG160 is not set
# CONFIG_FXAS21002C is not set
CONFIG_HID_SENSOR_GYRO_3D=m
# CONFIG_MPU3050_I2C is not set
# CONFIG_IIO_ST_GYRO_3AXIS is not set
# CONFIG_ITG3200 is not set
# end of Digital gyroscope sensors
#
# Health Sensors
#
#
# Heart Rate Monitors
#
# CONFIG_AFE4403 is not set
# CONFIG_AFE4404 is not set
# CONFIG_MAX30100 is not set
# CONFIG_MAX30102 is not set
# end of Heart Rate Monitors
# end of Health Sensors
#
# Humidity sensors
#
# CONFIG_AM2315 is not set
# CONFIG_DHT11 is not set
# CONFIG_HDC100X is not set
CONFIG_HID_SENSOR_HUMIDITY=m
# CONFIG_HTS221 is not set
# CONFIG_HTU21 is not set
# CONFIG_SI7005 is not set
# CONFIG_SI7020 is not set
# end of Humidity sensors
#
# Inertial measurement units
#
# CONFIG_ADIS16400 is not set
# CONFIG_ADIS16460 is not set
# CONFIG_ADIS16480 is not set
# CONFIG_BMI160_I2C is not set
# CONFIG_BMI160_SPI is not set
# CONFIG_KMX61 is not set
# CONFIG_INV_MPU6050_I2C is not set
# CONFIG_INV_MPU6050_SPI is not set
# CONFIG_IIO_ST_LSM6DSX is not set
# end of Inertial measurement units
#
# Light sensors
#
# CONFIG_ACPI_ALS is not set
# CONFIG_ADJD_S311 is not set
# CONFIG_AL3320A is not set
# CONFIG_APDS9300 is not set
# CONFIG_APDS9960 is not set
# CONFIG_BH1750 is not set
# CONFIG_BH1780 is not set
# CONFIG_CM32181 is not set
# CONFIG_CM3232 is not set
# CONFIG_CM3323 is not set
# CONFIG_CM36651 is not set
# CONFIG_GP2AP020A00F is not set
# CONFIG_SENSORS_ISL29018 is not set
# CONFIG_SENSORS_ISL29028 is not set
# CONFIG_ISL29125 is not set
CONFIG_HID_SENSOR_ALS=m
CONFIG_HID_SENSOR_PROX=m
# CONFIG_JSA1212 is not set
# CONFIG_RPR0521 is not set
# CONFIG_LTR501 is not set
# CONFIG_LV0104CS is not set
# CONFIG_MAX44000 is not set
# CONFIG_MAX44009 is not set
# CONFIG_NOA1305 is not set
# CONFIG_OPT3001 is not set
# CONFIG_PA12203001 is not set
# CONFIG_SI1133 is not set
# CONFIG_SI1145 is not set
# CONFIG_STK3310 is not set
# CONFIG_ST_UVIS25 is not set
# CONFIG_TCS3414 is not set
# CONFIG_TCS3472 is not set
# CONFIG_SENSORS_TSL2563 is not set
# CONFIG_TSL2583 is not set
# CONFIG_TSL2772 is not set
# CONFIG_TSL4531 is not set
# CONFIG_US5182D is not set
# CONFIG_VCNL4000 is not set
# CONFIG_VCNL4035 is not set
# CONFIG_VEML6070 is not set
# CONFIG_VL6180 is not set
# CONFIG_ZOPT2201 is not set
# end of Light sensors
#
# Magnetometer sensors
#
# CONFIG_AK8975 is not set
# CONFIG_AK09911 is not set
# CONFIG_BMC150_MAGN_I2C is not set
# CONFIG_BMC150_MAGN_SPI is not set
# CONFIG_MAG3110 is not set
CONFIG_HID_SENSOR_MAGNETOMETER_3D=m
# CONFIG_MMC35240 is not set
# CONFIG_IIO_ST_MAGN_3AXIS is not set
# CONFIG_SENSORS_HMC5843_I2C is not set
# CONFIG_SENSORS_HMC5843_SPI is not set
# CONFIG_SENSORS_RM3100_I2C is not set
# CONFIG_SENSORS_RM3100_SPI is not set
# end of Magnetometer sensors
#
# Multiplexers
#
# end of Multiplexers
#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=m
CONFIG_HID_SENSOR_DEVICE_ROTATION=m
# end of Inclinometer sensors
#
# Triggers - standalone
#
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
# CONFIG_IIO_SYSFS_TRIGGER is not set
# end of Triggers - standalone
#
# Digital potentiometers
#
# CONFIG_AD5272 is not set
# CONFIG_DS1803 is not set
# CONFIG_MAX5432 is not set
# CONFIG_MAX5481 is not set
# CONFIG_MAX5487 is not set
# CONFIG_MCP4018 is not set
# CONFIG_MCP4131 is not set
# CONFIG_MCP4531 is not set
# CONFIG_MCP41010 is not set
# CONFIG_TPL0102 is not set
# end of Digital potentiometers
#
# Digital potentiostats
#
# CONFIG_LMP91000 is not set
# end of Digital potentiostats
#
# Pressure sensors
#
# CONFIG_ABP060MG is not set
# CONFIG_BMP280 is not set
# CONFIG_DPS310 is not set
CONFIG_HID_SENSOR_PRESS=m
# CONFIG_HP03 is not set
# CONFIG_MPL115_I2C is not set
# CONFIG_MPL115_SPI is not set
# CONFIG_MPL3115 is not set
# CONFIG_MS5611 is not set
# CONFIG_MS5637 is not set
# CONFIG_IIO_ST_PRESS is not set
# CONFIG_T5403 is not set
# CONFIG_HP206C is not set
# CONFIG_ZPA2326 is not set
# end of Pressure sensors
#
# Lightning sensors
#
# CONFIG_AS3935 is not set
# end of Lightning sensors
#
# Proximity and distance sensors
#
# CONFIG_ISL29501 is not set
# CONFIG_LIDAR_LITE_V2 is not set
# CONFIG_MB1232 is not set
# CONFIG_RFD77402 is not set
# CONFIG_SRF04 is not set
# CONFIG_SX9500 is not set
# CONFIG_SRF08 is not set
# CONFIG_VL53L0X_I2C is not set
# end of Proximity and distance sensors
#
# Resolver to digital converters
#
# CONFIG_AD2S90 is not set
# CONFIG_AD2S1200 is not set
# end of Resolver to digital converters
#
# Temperature sensors
#
# CONFIG_MAXIM_THERMOCOUPLE is not set
CONFIG_HID_SENSOR_TEMP=m
# CONFIG_MLX90614 is not set
# CONFIG_MLX90632 is not set
# CONFIG_TMP006 is not set
# CONFIG_TMP007 is not set
# CONFIG_TSYS01 is not set
# CONFIG_TSYS02D is not set
# CONFIG_MAX31856 is not set
# end of Temperature sensors
CONFIG_NTB=m
# CONFIG_NTB_MSI is not set
# CONFIG_NTB_AMD is not set
# CONFIG_NTB_IDT is not set
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_SWITCHTEC is not set
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_TRANSPORT is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_LPSS=m
CONFIG_PWM_LPSS_PCI=m
CONFIG_PWM_LPSS_PLATFORM=m
# CONFIG_PWM_PCA9685 is not set
#
# IRQ chip support
#
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_CPCAP_USB is not set
# end of PHY Subsystem
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL_CORE=m
CONFIG_INTEL_RAPL=m
# CONFIG_IDLE_INJECT is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# end of Performance monitor support
CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
CONFIG_THUNDERBOLT=y
#
# Android
#
# CONFIG_ANDROID is not set
# end of Android
CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_BLK=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_ND_PFN=m
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_NVDIMM_KEYS=y
CONFIG_DAX_DRIVER=y
CONFIG_DAX=y
CONFIG_DEV_DAX=m
CONFIG_DEV_DAX_PMEM=m
CONFIG_DEV_DAX_KMEM=m
CONFIG_DEV_DAX_PMEM_COMPAT=m
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_UNISYS_VISORBUS is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=m
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
CONFIG_XFS_ONLINE_SCRUB=y
# CONFIG_XFS_ONLINE_REPAIR is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_FS_DAX=y
CONFIG_FS_DAX_PMD=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
# CONFIG_MANDATORY_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_VIRTIO_FS=m
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_NTFS_FS is not set
# end of DOS/FAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_VMCORE_DEVICE_DUMP=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
# CONFIG_CRAMFS_MTD is not set
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
CONFIG_NFSD_SCSILAYOUT=y
# CONFIG_NFSD_FLEXFILELAYOUT is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set
CONFIG_SUNRPC_DEBUG=y
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_CEPH_FS=m
# CONFIG_CEPH_FSCACHE is not set
CONFIG_CEPH_FS_POSIX_ACL=y
CONFIG_CEPH_FS_SECURITY_LABEL=y
CONFIG_CIFS=m
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SMB_DIRECT is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
# CONFIG_UNICODE is not set
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_PAGE_TABLE_ISOLATION=y
CONFIG_SECURITY_INFINIBAND=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY_FALLBACK=y
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
# CONFIG_INTEGRITY_PLATFORM_KEYRING is not set
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
# CONFIG_IMA_WRITE_POLICY is not set
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
# CONFIG_IMA_ARCH_POLICY is not set
# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set
CONFIG_IMA_APPRAISE_BOOTPARAM=y
# CONFIG_IMA_APPRAISE_MODSIG is not set
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
# CONFIG_EVM_ADD_XATTRS is not set
# CONFIG_EVM_LOAD_X509 is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="yama,integrity,selinux"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=m
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=m
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECRDSA is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=m
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_OFB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_KEYWRAP is not set
CONFIG_CRYPTO_NHPOLY1305=m
CONFIG_CRYPTO_NHPOLY1305_SSE2=m
CONFIG_CRYPTO_NHPOLY1305_AVX2=m
CONFIG_CRYPTO_ADIANTUM=m
CONFIG_CRYPTO_ESSIV=m
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_XXHASH=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=m
CONFIG_CRYPTO_POLY1305_X86_64=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=m
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
#
# Ciphers
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_LIB_ARC4=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_DES3_EDE_X86_64=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CHACHA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
# CONFIG_CRYPTO_SM4 is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_STATS=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
CONFIG_CRYPTO_DEV_SP_CCP=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
CONFIG_CRYPTO_DEV_SP_PSP=y
# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
CONFIG_CRYPTO_DEV_QAT=m
CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
CONFIG_CRYPTO_DEV_QAT_C3XXX=m
CONFIG_CRYPTO_DEV_QAT_C62X=m
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
CONFIG_CRYPTO_DEV_QAT_C62XVF=m
CONFIG_CRYPTO_DEV_NITROX=m
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m
CONFIG_CRYPTO_DEV_CHELSIO=m
CONFIG_CHELSIO_IPSEC_INLINE=y
# CONFIG_CRYPTO_DEV_CHELSIO_TLS is not set
# CONFIG_CRYPTO_DEV_VIRTIO is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE=m
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
# CONFIG_TPM_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
# CONFIG_RAID6_PQ_BENCHMARK is not set
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CORDIC=m
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y
CONFIG_DMA_VIRT_OPS=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_DIMLIB=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_UACCESS_MCSAFE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_SBITMAP=y
CONFIG_PARMAN=m
CONFIG_OBJAGG=m
# CONFIG_STRING_SELFTEST is not set
# end of Library routines
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
# end of printk and dmesg options
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_DEBUG_INFO_BTF is not set
# CONFIG_GDB_SCRIPTS is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_INSTALL=y
CONFIG_HEADERS_CHECK=y
CONFIG_OPTIMIZE_INLINING=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_STACK_VALIDATION=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_CC_HAS_KASAN_GENERIC=y
# CONFIG_KASAN is not set
CONFIG_KASAN_STACK=1
# end of Memory Debugging
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_DEBUG_SHIRQ=y
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_WQ_WATCHDOG is not set
# end of Debug Lockups and Hangs
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_PREEMPTIRQ_EVENTS is not set
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
# CONFIG_BPF_KPROBE_OVERRIDE is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_TRACING_MAP=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_STRSCPY is not set
CONFIG_TEST_KSTRTOX=y
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_BITFIELD is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_OVERFLOW is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_PARMAN is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_VMALLOC is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_BLACKHOLE_DEV is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_MEMCAT_P is not set
CONFIG_TEST_LIVEPATCH=m
# CONFIG_TEST_OBJAGG is not set
# CONFIG_TEST_STACKINIT is not set
# CONFIG_TEST_MEMINIT is not set
# CONFIG_MEMTEST is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_DEFAULT_ENABLE=0x0
CONFIG_KDB_KEYBOARD=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_UBSAN_ALIGNMENT=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_EARLY_PRINTK_USB=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_USB_XDBC=y
CONFIG_X86_PTDUMP_CORE=y
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
CONFIG_DEBUG_WX=y
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of Kernel hacking
#
# Red Hat options
#
CONFIG_RH_DISABLE_DEPRECATED=y
# end of Red Hat options
[-- Attachment #4: Type: text/plain, Size: 156 bytes --]
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-04 20:53 ` Jerry Snitselaar
@ 2019-12-05 1:39 ` Lu Baolu
2019-12-05 2:25 ` Jerry Snitselaar
0 siblings, 1 reply; 30+ messages in thread
From: Lu Baolu @ 2019-12-05 1:39 UTC (permalink / raw)
To: Jerry Snitselaar; +Cc: iommu
Hi,
On 12/5/19 4:53 AM, Jerry Snitselaar wrote:
> Attaching console output (can't get to a point to actually log in) and
> config that is used to build that kernel.
[...]
[ 21.969477] pci 0000:00:00.0: Adding to iommu group 0
[ 21.971390] pci 0000:00:01.0: Adding to iommu group 1
[ 21.973173] pci 0000:00:01.1: Adding to iommu group 2
[ 21.974930] pci 0000:00:02.0: Adding to iommu group 3
[ 21.976672] pci 0000:00:02.1: Adding to iommu group 4
[ 21.978446] pci 0000:00:02.2: Adding to iommu group 5
[ 21.980224] pci 0000:00:02.3: Adding to iommu group 6
[ 21.982096] pci 0000:00:03.0: Adding to iommu group 7
[ 21.983868] pci 0000:00:03.1: Adding to iommu group 8
[ 21.985644] pci 0000:00:03.2: Adding to iommu group 9
[ 21.987484] pci 0000:00:03.3: Adding to iommu group 10
[ 21.989830] pci 0000:00:04.0: Adding to iommu group 11
[ 21.991738] pci 0000:00:04.1: Adding to iommu group 11
[ 21.993557] pci 0000:00:04.2: Adding to iommu group 11
[ 21.995360] pci 0000:00:04.3: Adding to iommu group 11
[ 21.997145] pci 0000:00:04.4: Adding to iommu group 11
[ 21.998915] pci 0000:00:04.5: Adding to iommu group 11
[ 22.000694] pci 0000:00:04.6: Adding to iommu group 11
[ 22.002569] pci 0000:00:04.7: Adding to iommu group 11
[ 22.004556] pci 0000:00:05.0: Adding to iommu group 12
[ 22.006388] pci 0000:00:05.2: Adding to iommu group 12
[ 22.008186] pci 0000:00:05.4: Adding to iommu group 12
[ 22.009968] pci 0000:00:11.0: Adding to iommu group 13
[ 22.011815] pci 0000:00:1a.0: Adding to iommu group 14
[ 22.013605] pci 0000:00:1c.0: Adding to iommu group 15
[ 22.015408] pci 0000:00:1c.7: Adding to iommu group 16
[ 22.017216] pci 0000:00:1d.0: Adding to iommu group 17
[ 22.018991] pci 0000:00:1e.0: Adding to iommu group 18
[ 22.021826] pci 0000:00:1e.0: Using iommu dma mapping
[ 22.023783] pci 0000:00:1f.0: Adding to iommu group 19
[ 22.025667] pci 0000:00:1f.2: Adding to iommu group 19
[ 22.346001] pci 0000:03:00.0: Adding to iommu group 20
[ 22.348727] pci 0000:03:00.0: Using iommu dma mapping
[ 22.350644] pci 0000:03:00.1: Adding to iommu group 20
[ 22.352833] pci 0000:03:00.2: Adding to iommu group 20
[...]
It seems that iommu pci bus probe didn't enumerate device [01:00.2] and
[02:00.0], the corresponding context entries were not setup. Hence dma
fault generated when devices access the memory.
Do these two devices show in "lspci" output? How do these devices get
enumerated by the system?
Best regards,
baolu
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-05 1:39 ` Lu Baolu
@ 2019-12-05 2:25 ` Jerry Snitselaar
2019-12-05 2:44 ` Lu Baolu
0 siblings, 1 reply; 30+ messages in thread
From: Jerry Snitselaar @ 2019-12-05 2:25 UTC (permalink / raw)
To: Lu Baolu; +Cc: iommu
On Thu Dec 05 19, Lu Baolu wrote:
>Hi,
>
>On 12/5/19 4:53 AM, Jerry Snitselaar wrote:
>>Attaching console output (can't get to a point to actually log in) and
>>config that is used to build that kernel.
>
>[...]
>[ 21.969477] pci 0000:00:00.0: Adding to iommu group 0
>[ 21.971390] pci 0000:00:01.0: Adding to iommu group 1
>[ 21.973173] pci 0000:00:01.1: Adding to iommu group 2
>[ 21.974930] pci 0000:00:02.0: Adding to iommu group 3
>[ 21.976672] pci 0000:00:02.1: Adding to iommu group 4
>[ 21.978446] pci 0000:00:02.2: Adding to iommu group 5
>[ 21.980224] pci 0000:00:02.3: Adding to iommu group 6
>[ 21.982096] pci 0000:00:03.0: Adding to iommu group 7
>[ 21.983868] pci 0000:00:03.1: Adding to iommu group 8
>[ 21.985644] pci 0000:00:03.2: Adding to iommu group 9
>[ 21.987484] pci 0000:00:03.3: Adding to iommu group 10
>[ 21.989830] pci 0000:00:04.0: Adding to iommu group 11
>[ 21.991738] pci 0000:00:04.1: Adding to iommu group 11
>[ 21.993557] pci 0000:00:04.2: Adding to iommu group 11
>[ 21.995360] pci 0000:00:04.3: Adding to iommu group 11
>[ 21.997145] pci 0000:00:04.4: Adding to iommu group 11
>[ 21.998915] pci 0000:00:04.5: Adding to iommu group 11
>[ 22.000694] pci 0000:00:04.6: Adding to iommu group 11
>[ 22.002569] pci 0000:00:04.7: Adding to iommu group 11
>[ 22.004556] pci 0000:00:05.0: Adding to iommu group 12
>[ 22.006388] pci 0000:00:05.2: Adding to iommu group 12
>[ 22.008186] pci 0000:00:05.4: Adding to iommu group 12
>[ 22.009968] pci 0000:00:11.0: Adding to iommu group 13
>[ 22.011815] pci 0000:00:1a.0: Adding to iommu group 14
>[ 22.013605] pci 0000:00:1c.0: Adding to iommu group 15
>[ 22.015408] pci 0000:00:1c.7: Adding to iommu group 16
>[ 22.017216] pci 0000:00:1d.0: Adding to iommu group 17
>[ 22.018991] pci 0000:00:1e.0: Adding to iommu group 18
>[ 22.021826] pci 0000:00:1e.0: Using iommu dma mapping
>[ 22.023783] pci 0000:00:1f.0: Adding to iommu group 19
>[ 22.025667] pci 0000:00:1f.2: Adding to iommu group 19
>[ 22.346001] pci 0000:03:00.0: Adding to iommu group 20
>[ 22.348727] pci 0000:03:00.0: Using iommu dma mapping
>[ 22.350644] pci 0000:03:00.1: Adding to iommu group 20
>[ 22.352833] pci 0000:03:00.2: Adding to iommu group 20
>[...]
>
>It seems that iommu pci bus probe didn't enumerate device [01:00.2] and
>[02:00.0], the corresponding context entries were not setup. Hence dma
>fault generated when devices access the memory.
>
>Do these two devices show in "lspci" output? How do these devices get
>enumerated by the system?
>
>Best regards,
>baolu
>
They are there in the output, but it seems out of order:
[ 22.025667] pci 0000:00:1f.2: Adding to iommu group 19
[ 22.028569] pci 0000:00:1f.2: DMAR: Setting identity map- 0xe8fff]
[ 22.331183] pci 0000:00:1f.2: DMAR: Setting identity map [0xf4000 - 0xf4fff]
[ 22.333546] pci 0000:00:1f.2: DMAR: Setting identity map [0xbdf6e000 - 0xbdf6efff]
[ 22.336099] pci 0000:00:1f.2: DMAR: Setting identity map [0xbdf6f000 - 0xbdf7efff]
[ 22.338604] pci 0000:00:1f.2: DMAR: Setting identity map [0xbdf7f000 - 0xbdf82fff]
[ 22.341189] pci 0000:00:1f.2: DMAR: Setting identity map [0xbdf83000 - 0xbdf84fff]
[ 22.343700] pci 0000:00:1f.2: DMAR: Device uses a private dma domain.
[ 22.346001] pci 0000:03:00.0: Adding to iommu group 20
[ 22.348727] pci 0000:03:00.0: Using iommu dma mapping
[ 22.350644] pci 0000:03:00.1: Adding to iommu group 20
[ 22.352833] pci 0000:03:00.2: Adding to iommu group 20
[ 22.354619] pci 0000:03:00.3: Adding to iommu group 20
>> [ 22.356423] pci 0000:02:00.0: Adding to iommu group 21
>> [ 22.358999] pci 0000:02:00.0: Using iommu dma mapping
[ 22.360785] pci 0000:04:00.0: Adding to iommu group 22
[ 22.362623] pci 0000:05:02.0: Adding to iommu group 23
[ 22.364412] pci 0000:05:04.0: Adding to iommu group 24
[ 22.366172] pci 0000:06:00.0: Adding to iommu group 23
[ 22.368762] pci 0000:06:00.0: DMAR: Setting identity map [0xe8000 - 0xe8fff]
[ 22.371290] pci 0000:06:00.0: DMAR: Setting identity map [0xf4000 - 0xf4fff]
[ 22.373646] pci 0000:06:00.0: DMAR: Setting ide000 - 0xbdf6efff]
[ 22.876042] pci 0000:06:00.0: DMAR: Setting identity map [0xbdf6f000 - 0xbdf7efff]
[ 22.878572] pci 0000:06:00.0: DMAR: Setting identity map [0xbdf7f000 - 0xbdf82fff]
[ 22.881167] pci 0000:06:00.0: DMAR: Setting identity map [0xbdf83000 - 0xbdf84fff]
[ 22.883729] pci 0000:06:00.0: DMAR: Device uses a private dma domain.
[ 22.885899] pci 0000:06:00.1: Adding to iommu group 23
[ 22.888675] pci 0000:06:00.1: DMAR: Setting identity map [0xe8000 - 0xe8fff]
[ 22.891216] pci 0000:06:00.1: DMAR: Setting identity map [0xf4000 - 0xf4fff]
[ 22.893576] pci 0000:06:00.1: DMAR: Setting identity map [0xbdf6e000 - 0xbdf6efff]
[ 22.896119] pci 0000:06:00.1: DMAR: Setting identity map [0xbdf6f000 - 0xbdf7efff]
[ 22.898620] pci 0000:06:00.1: DMAR: Setting identity map [0xbdf7f000 - 0xbdf82fff]
[ 22.901232] pci 0000:06:00.1: DMAR: Setting identity map [0xbdf83000 - 0xbdf84fff]
[ 22.903736] pci 0000:06:00.1: DMAR: Device uses a private dma domain.
[ 22.905906] pci 0000:07:00.0: Adding to iommu group 24
[ 22.908705] pci 0000:07:00.0: DMAR: Setting identity map [0xe8000 - 0xe8fff]
[ 22.911149] pci 0000:07:00.0: DMAR: Setting identity map [0xf4000 - 0xf4fff]
[ 22.913483] pci 0000:07:00.0: DMAR: Setting identity map [0xbdf6e000 - 0xbdf6efff]
[ 22.9100.0: DMAR: Setting identity map [0xbdf6f000 - 0xbdf7efff]
[ 23.418361] pci 0000:07:00.0: DMAR: Setting identity map [0xbdf7f000 - 0xbdf82fff]
[ 23.420922] pci 0000:07:00.0: DMAR: Setting identity map [0xbdf83000 - 0xbdf84fff]
[ 23.423506] pci 0000:07:00.0: DMAR: Device uses a private dma domain.
[ 23.425680] pci 0000:07:00.1: Adding to iommu group 24
[ 23.428513] pci 0000:07:00.1: DMAR: Setting identity map [0xe8000 - 0xe8fff]
[ 23.430910] pci 0000:07:00.1: DMAR: Setting identity map [0xf4000 - 0xf4fff]
[ 23.433253] pci 0000:07:00.1: DMAR: Setting identity map [0xbdf6e000 - 0xbdf6efff]
[ 23.435794] pci 0000:07:00.1: DMAR: Setting identity map [0xbdf6f000 - 0xbdf7efff]
[ 23.438329] pci 0000:07:00.1: DMAR: Setting identity map [0xbdf7f000 - 0xbdf82fff]
[ 23.440806] pci 0000:07:00.1: DMAR: Setting identity map [0xbdf83000 - 0xbdf84fff]
[ 23.443733] pci 0000:07:00.1: DMAR: Device uses a private dma domain.
[ 23.446201] pci 0000:01:00.0: Adding to iommu group 25
[ 23.448949] pci 0000:01:00.0: Using iommu dma mapping
[ 23.450807] pci 0000:01:00.1: Adding to iommu group 25
[ 23.452666] pci 0000:01:00.1: DMAR: Device uses a private identity domain.
>> [ 23.455063] pci 0000:01:00.2: Adding to iommu group 25
[ 23.456881] pci 0000:01:00.4: Adding to iommu group 25
[ 23.458693] pci 0000:01:00.4: DMAR: Device uses a private identity domain.
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-05 2:25 ` Jerry Snitselaar
@ 2019-12-05 2:44 ` Lu Baolu
2019-12-05 2:53 ` Jerry Snitselaar
0 siblings, 1 reply; 30+ messages in thread
From: Lu Baolu @ 2019-12-05 2:44 UTC (permalink / raw)
To: Jerry Snitselaar; +Cc: iommu
Hi,
On 12/5/19 10:25 AM, Jerry Snitselaar wrote:
>>
>> It seems that iommu pci bus probe didn't enumerate device [01:00.2] and
>> [02:00.0], the corresponding context entries were not setup. Hence dma
>> fault generated when devices access the memory.
>>
>> Do these two devices show in "lspci" output? How do these devices get
>> enumerated by the system?
>>
>> Best regards,
>> baolu
>>
>
> They are there in the output, but it seems out of order:
[ 23.446201] pci 0000:01:00.0: Adding to iommu group 25
[ 23.448949] pci 0000:01:00.0: Using iommu dma mapping
[ 23.450807] pci 0000:01:00.1: Adding to iommu group 25
[ 23.452666] pci 0000:01:00.1: DMAR: Device uses a private identity
domain.
[ 23.455063] pci 0000:01:00.2: Adding to iommu group 25
[ 23.456881] pci 0000:01:00.4: Adding to iommu group 25
[ 23.458693] pci 0000:01:00.4: DMAR: Device uses a private identity
domain.
Oh, yes!
So device 01:00.0 01:00.1 01:00.2 01:00.4 share a single group. The
default domain for this group has been set to DMA although iommu=pt has
been set. As the result, .0 .2 use DMA, but .1, .4 use IDENTITY. This is
not a valid configuration since all devices in a group should use a same
domain.
Do you mind posting the "lspci -vvv" output of these devices? I want to
figure out why these devices request different domain type.
Best regards,
baolu
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-05 2:44 ` Lu Baolu
@ 2019-12-05 2:53 ` Jerry Snitselaar
2019-12-06 1:52 ` Lu Baolu
0 siblings, 1 reply; 30+ messages in thread
From: Jerry Snitselaar @ 2019-12-05 2:53 UTC (permalink / raw)
To: Lu Baolu; +Cc: iommu
On Thu Dec 05 19, Lu Baolu wrote:
>Hi,
>
>On 12/5/19 10:25 AM, Jerry Snitselaar wrote:
>>>
>>>It seems that iommu pci bus probe didn't enumerate device [01:00.2] and
>>>[02:00.0], the corresponding context entries were not setup. Hence dma
>>>fault generated when devices access the memory.
>>>
>>>Do these two devices show in "lspci" output? How do these devices get
>>>enumerated by the system?
>>>
>>>Best regards,
>>>baolu
>>>
>>
>>They are there in the output, but it seems out of order:
>
>
>[ 23.446201] pci 0000:01:00.0: Adding to iommu group 25
>[ 23.448949] pci 0000:01:00.0: Using iommu dma mapping
>[ 23.450807] pci 0000:01:00.1: Adding to iommu group 25
>[ 23.452666] pci 0000:01:00.1: DMAR: Device uses a private identity
>domain.
>[ 23.455063] pci 0000:01:00.2: Adding to iommu group 25
>[ 23.456881] pci 0000:01:00.4: Adding to iommu group 25
>[ 23.458693] pci 0000:01:00.4: DMAR: Device uses a private identity
>domain.
>
>Oh, yes!
>
>So device 01:00.0 01:00.1 01:00.2 01:00.4 share a single group. The
>default domain for this group has been set to DMA although iommu=pt has
>been set. As the result, .0 .2 use DMA, but .1, .4 use IDENTITY. This is
>not a valid configuration since all devices in a group should use a same
>domain.
>
>Do you mind posting the "lspci -vvv" output of these devices? I want to
>figure out why these devices request different domain type.
>
>Best regards,
>baolu
>
01:00.0 System peripheral: Hewlett-Packard Company Integrated Lights-Out Standard Slave Instrumentation & System Support (rev 05)
Subsystem: Hewlett-Packard Company iLO4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
NUMA node: 0
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at f7bf0000 (32-bit, non-prefetchable) [size=512]
Region 2: I/O ports at 3400 [size=256]
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [c0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s <4us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: hpwdt
Kernel modules: hpwdt
01:00.1 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200EH (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company iLO4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 16
NUMA node: 0
Region 0: Memory at f5000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at f7be0000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at f7000000 (32-bit, non-prefetchable) [size=8M]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [a8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [c0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s <4us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: mgag200
Kernel modules: mgag200
01:00.2 System peripheral: Hewlett-Packard Company Integrated Lights-Out Standard Management Processor Support and Messaging (rev 05)
Subsystem: Hewlett-Packard Company iLO4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 16
NUMA node: 0
Region 0: I/O ports at 3800 [size=256]
Region 1: Memory at f6ff0000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at f6e00000 (32-bit, non-prefetchable) [size=1M]
Region 3: Memory at f6d80000 (32-bit, non-prefetchable) [size=512K]
Region 4: Memory at f6d70000 (32-bit, non-prefetchable) [size=32K]
Region 5: Memory at f6d60000 (32-bit, non-prefetchable) [size=32K]
[virtual] Expansion ROM at f6d00000 [disabled] [size=64K]
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [c0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s <4us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: hpilo
Kernel modules: hpilo
01:00.4 USB controller: Hewlett-Packard Company Integrated Lights-Out Standard Virtual USB Controller (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company iLO4
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 16
NUMA node: 0
Region 4: I/O ports at 3c00 [size=32]
Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [80] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s <4us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [f0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
02:00.0 RAID bus controller: Hewlett-Packard Company Smart Array Gen8 Controllers (rev 01)
Subsystem: Hewlett-Packard Company P420i
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 52
NUMA node: 0
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at f7cf0000 (64-bit, non-prefetchable) [size=1K]
Region 4: I/O ports at 5000 [size=256]
[virtual] Expansion ROM at f7c00000 [disabled] [size=512K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable- Count=1/32 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [b0] MSI-X: Enable+ Count=64 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00003000
Capabilities: [c0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <1us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM not supported
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR+, OBFF Via message
AtomicOpsCap: 32bit+ 64bit+ 128bitCAS+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
AtomicOpsCtl: ReqEn-
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+, EqualizationPhase1+
EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [300 v1] #19
Kernel driver in use: hpsa
Kernel modules: hpsa
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-05 2:53 ` Jerry Snitselaar
@ 2019-12-06 1:52 ` Lu Baolu
2019-12-06 7:24 ` Jerry Snitselaar
0 siblings, 1 reply; 30+ messages in thread
From: Lu Baolu @ 2019-12-06 1:52 UTC (permalink / raw)
To: Jerry Snitselaar; +Cc: iommu
Hi,
On 12/5/19 10:53 AM, Jerry Snitselaar wrote:
> On Thu Dec 05 19, Lu Baolu wrote:
>> Hi,
>>
>> On 12/5/19 10:25 AM, Jerry Snitselaar wrote:
>>>>
>>>> It seems that iommu pci bus probe didn't enumerate device [01:00.2] and
>>>> [02:00.0], the corresponding context entries were not setup. Hence dma
>>>> fault generated when devices access the memory.
>>>>
>>>> Do these two devices show in "lspci" output? How do these devices get
>>>> enumerated by the system?
>>>>
>>>> Best regards,
>>>> baolu
>>>>
>>>
>>> They are there in the output, but it seems out of order:
>>
>>
>> [ 23.446201] pci 0000:01:00.0: Adding to iommu group 25
>> [ 23.448949] pci 0000:01:00.0: Using iommu dma mapping
>> [ 23.450807] pci 0000:01:00.1: Adding to iommu group 25
>> [ 23.452666] pci 0000:01:00.1: DMAR: Device uses a private identity
>> domain.
>> [ 23.455063] pci 0000:01:00.2: Adding to iommu group 25
>> [ 23.456881] pci 0000:01:00.4: Adding to iommu group 25
>> [ 23.458693] pci 0000:01:00.4: DMAR: Device uses a private identity
>> domain.
>>
>> Oh, yes!
>>
>> So device 01:00.0 01:00.1 01:00.2 01:00.4 share a single group. The
>> default domain for this group has been set to DMA although iommu=pt has
>> been set. As the result, .0 .2 use DMA, but .1, .4 use IDENTITY. This is
>> not a valid configuration since all devices in a group should use a same
>> domain.
>>
>> Do you mind posting the "lspci -vvv" output of these devices? I want to
>> figure out why these devices request different domain type.
>>
>> Best regards,
>> baolu
>>
>
> 01:00.0 System peripheral: Hewlett-Packard Company Integrated Lights-Out
> Standard Slave Instrumentation & System Support (rev 05)
> Subsystem: Hewlett-Packard Company iLO4
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 19
> NUMA node: 0
> Region 0: I/O ports at 3000 [size=256]
> Region 1: Memory at f7bf0000 (32-bit, non-prefetchable) [size=512]
> Region 2: I/O ports at 3400 [size=256]
> Capabilities: [78] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [b0] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [c0] Express (v1) Legacy Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> unlimited, L1 unlimited
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
> TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit
> Latency L0s <4us
> ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk-
> DLActive- BWMgmt- ABWMgmt-
> Kernel driver in use: hpwdt
> Kernel modules: hpwdt
>
> 01:00.1 VGA compatible controller: Matrox Electronics Systems Ltd. MGA
> G200EH (prog-if 00 [VGA controller])
> Subsystem: Hewlett-Packard Company iLO4
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 16
> NUMA node: 0
> Region 0: Memory at f5000000 (32-bit, prefetchable) [size=16M]
> Region 1: Memory at f7be0000 (32-bit, non-prefetchable) [size=16K]
> Region 2: Memory at f7000000 (32-bit, non-prefetchable) [size=8M]
> [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
> Capabilities: [a8] Power Management version 3
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [b0] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [c0] Express (v1) Legacy Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> unlimited, L1 unlimited
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
> TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit
> Latency L0s <4us
> ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk-
> DLActive- BWMgmt- ABWMgmt-
> Kernel driver in use: mgag200
> Kernel modules: mgag200
>
> 01:00.2 System peripheral: Hewlett-Packard Company Integrated Lights-Out
> Standard Management Processor Support and Messaging (rev 05)
> Subsystem: Hewlett-Packard Company iLO4
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 16
> NUMA node: 0
> Region 0: I/O ports at 3800 [size=256]
> Region 1: Memory at f6ff0000 (32-bit, non-prefetchable) [size=256]
> Region 2: Memory at f6e00000 (32-bit, non-prefetchable) [size=1M]
> Region 3: Memory at f6d80000 (32-bit, non-prefetchable) [size=512K]
> Region 4: Memory at f6d70000 (32-bit, non-prefetchable) [size=32K]
> Region 5: Memory at f6d60000 (32-bit, non-prefetchable) [size=32K]
> [virtual] Expansion ROM at f6d00000 [disabled] [size=64K]
> Capabilities: [78] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [b0] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [c0] Express (v1) Legacy Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> unlimited, L1 unlimited
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
> TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit
> Latency L0s <4us
> ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk-
> DLActive- BWMgmt- ABWMgmt-
> Kernel driver in use: hpilo
> Kernel modules: hpilo
>
> 01:00.4 USB controller: Hewlett-Packard Company Integrated Lights-Out
> Standard Virtual USB Controller (rev 02) (prog-if 00 [UHCI])
> Subsystem: Hewlett-Packard Company iLO4
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 16
> NUMA node: 0
> Region 4: I/O ports at 3c00 [size=32]
> Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [80] Express (v1) Legacy Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> unlimited, L1 unlimited
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
> TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit
> Latency L0s <4us
> ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk-
> DLActive- BWMgmt- ABWMgmt-
> Capabilities: [f0] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: uhci_hcd
>
> 02:00.0 RAID bus controller: Hewlett-Packard Company Smart Array Gen8
> Controllers (rev 01)
> Subsystem: Hewlett-Packard Company P420i
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 52
> NUMA node: 0
> Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=1M]
> Region 2: Memory at f7cf0000 (64-bit, non-prefetchable) [size=1K]
> Region 4: I/O ports at 5000 [size=256]
> [virtual] Expansion ROM at f7c00000 [disabled] [size=512K]
> Capabilities: [80] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1+,D2-,D3hot+,D3cold-)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [90] MSI: Enable- Count=1/32 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [b0] MSI-X: Enable+ Count=64 Masked-
> Vector table: BAR=0 offset=00002000
> PBA: BAR=0 offset=00003000
> Capabilities: [c0] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us,
> L1 <1us
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> SlotPowerLimit 0.000W
> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
> Unsupported-
> RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 256 bytes, MaxReadReq 4096 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM not supported
> ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk-
> DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR+, OBFF
> Via message
> AtomicOpsCap: 32bit+ 64bit+ 128bitCAS+
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-,
> OBFF Disabled
> AtomicOpsCtl: ReqEn-
> LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB,
> EqualizationComplete+, EqualizationPhase1+
> EqualizationPhase2+, EqualizationPhase3+,
> LinkEqualizationRequest-
> Capabilities: [100 v2] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> UESvrt: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn-
> ECRCChkCap+ ECRCChkEn-
> MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
> HeaderLog: 00000000 00000000 00000000 00000000
> Capabilities: [300 v1] #19
> Kernel driver in use: hpsa
> Kernel modules: hpsa
>
Can you please try below change? Let's check whether the afending
address has been mapped for device 01.00.2.
$ git diff
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index db7bfd4f2d20..d9daf66be849 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -663,6 +663,8 @@ static int iommu_group_create_direct_mappings(struct
iommu_group *group,
ret = iommu_map(domain, addr, addr, pg_size,
entry->prot);
if (ret)
goto out;
+
+ dev_info(dev, "Setting identity map [0x%Lx -
0x%Lx] for group %d\n", addr, addr + pg_size, group->id);
}
}
I am doubting that device 01.00.2 is not in the device scope of
[ 4.485108] DMAR: RMRR base: 0x000000bdf6f000 end: 0x000000bdf7efff
By the way, does device 01.00.2 works well after binding the driver?
Best regards,
baolu
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply related [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-06 1:52 ` Lu Baolu
@ 2019-12-06 7:24 ` Jerry Snitselaar
2019-12-07 1:53 ` Lu Baolu
2019-12-08 6:04 ` Lu Baolu
0 siblings, 2 replies; 30+ messages in thread
From: Jerry Snitselaar @ 2019-12-06 7:24 UTC (permalink / raw)
To: Lu Baolu; +Cc: iommu
[-- Attachment #1: Type: text/plain, Size: 1392 bytes --]
On Fri Dec 06 19, Lu Baolu wrote:
[snip]
>
>Can you please try below change? Let's check whether the afending
>address has been mapped for device 01.00.2.
>
>$ git diff
>diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
>index db7bfd4f2d20..d9daf66be849 100644
>--- a/drivers/iommu/iommu.c
>+++ b/drivers/iommu/iommu.c
>@@ -663,6 +663,8 @@ static int
>iommu_group_create_direct_mappings(struct iommu_group *group,
> ret = iommu_map(domain, addr, addr, pg_size,
>entry->prot);
> if (ret)
> goto out;
>+
>+ dev_info(dev, "Setting identity map [0x%Lx -
>0x%Lx] for group %d\n", addr, addr + pg_size, group->id);
> }
>
> }
>
>I am doubting that device 01.00.2 is not in the device scope of
>
>[ 4.485108] DMAR: RMRR base: 0x000000bdf6f000 end: 0x000000bdf7efff
>
>By the way, does device 01.00.2 works well after binding the driver?
>
When I boot it with passthrough it doesn't get to a point where I can
login. I think the serial console on these systems is tied to the ilo,
so the conserver connection could be making things
worse. Unfortunately the system is remote. I should have more time now
to focus on debugging this.
Attaching console output for the above patch.
Regards,
Jerry
>Best regards,
>baolu
>
[-- Attachment #2: direct-mappings --]
[-- Type: text/plain, Size: 15657 bytes --]
[ 21.833145] DMAR: dmar0: Using Queued invalidation
[ 21.834960] DMAR: dmar1: Using Queued invalidation
[ 21.837860] pci 0000:00:00.0: Adding to iommu group 0
[ 21.839733] pci 0000:00:01.0: Adding to iommu group 1
[ 21.841601] pci 0000:00:01.1: Adding to iommu group 2
[ 21.843410] pci 0000:00:02.0: Adding to iommu group 3
[ 21.845652] pci 0000:00:02.1: Adding to iommu group 4
[ 21.847473] pci 0000:00:02.2: Adding to iommu group 5
[ 21.849299] pci 0000:00:02.3: Adding to iommu group 6
[ 21.851163] pci 0000:00:03.0: Adding to iommu group 7
[ 21.852918] pci 0000:00:03.1: Adding to iommu group 8
[ 21.854720] pci 0000:00:03.2: Adding to iommu group 9
[ 21.856761] pci 0000:00:03.3: Adding to iommu group 10
[ 21.858998] pci 0000:00:04.0: Adding to iommu group 11
[ 21.860937] pci 0000:00:04.1: Adding to iommu group 11
[ 21.863149] pci 0000:00:04.2: Adding to iommu group 11
[ 21.864941] pci 0000:00:04.3: Adding to iommu group 11
[ 21.866744] pci 0000:00:04.4: Adding to iommu group 11
[ 21.868567] pci 0000:00:04.5: Adding to iommu group 11
[ 21.870458] pci 0000:00:04.6: Adding to iommu group 11
[ 21.872254] pci 0000:00:04.7: Adding to iommu group 11
[ 21.874231] pci 0000:00:05.0: Adding to iommu group 12
[ 21.876047] pci 0000:00:05.2: Adding to iommu group 12
[ 21.877908] pci 0000:00:05.4: Adding to iommu group 12
[ 21.879814] pci 0000:00:11.0: Adding to iommu group 13
[ 21.881684] pci 0000:00:1a.0: Adding to iommu group 14
[ 21.883516] pci 0000:00:1c.0: Adding to iommu group 15
[ 21.885324] pci 0000:00:1c.7: Adding to iommu group 16
[ 21.887116] pci 0000:00:1d.0: Adding to iommu group 17
[ 21.888907] pci 0000:00:1e.0: Adding to iommu group 18
[ 21.891913] pci 0000:00:1e.0: Using iommu dma mapping
[ 21.894001] pci 0000:00:1f.0: Adding to iommu group 19
[ 21.895979] pci 0000:00:1f.2: Adding to iommu group 19
[ 21.898870] pci 0000:00:1f.2: DMAR: Setting identity map [0xe8000 - 0xe8fff]
[ 21.901428] pci 0000:00:1f.2: DMAR: Setting identity map [0xf4000 - 0xf4fff]
[ 21.903790] pci 0000:00:1f.2: DMAR: Setting identity map [0xbdf6e000 - 0xbdf6efff]
[ 21.906347] pci 0000:00:1f.2: DMAR: Setting identity map [0xbdf6f000 - 0xbdf7efff]
[ 21.908885] pci 0000:00:1f.2: DMAR: Setting identity map [0xbdf7f000 - 0xbdf82fff]
[ 21.911620] pci 0000:00:1f.2: DMAR: Setting identity map [0xbdf83000 - 0xbdf84fff]
[ 21.914141] pci 0000:00:1f.2: DMAR: Device uses a private dma domain.
[ 21.916690] pci 0000:03:00.0: Adding to iommu group 20
[ 21.919589] pci 0000:03:00.0: Using iommu dma mapping
[ 21.921708] pci 0000:03:00.1: Setting identity map [0xe8000 - 0xe9000] for group 20
[ 21.924309] pci 0000:03:00.1: Setting identity map [0xf4000 - 0xf5000] for group 20
[ 21.926854] pci 0000:03:00.1: Setting identity map [0xbdf6e000 - 0xbdf6f000] for group 20
[ 21.929560] pci 0000:03:00.1: Setting identity map [0xbdf6f000 - 0xbdf70000] for group 20
[ 21.932366] pci 0000:03:00.1: Setting identity map [0xbdf00 - 0xbdf71000] for group 20
[ 22.035075] pci 0000:03:00.1: Setting identity00 - 0xbdf72000] for group 20
[ 22.437744] pci 0000:03:00.1: Setting identityp [0xbdf72000 - 0xbdf73000] for group 20
[ 22.540574] pci 0000:03:00.1: Setting identity map [0xbdf73000 - 0xbdf74000] for group 20
[ 22.543522] pci 0000:03:00.1: Setting identity map [0xbdf74000 - 0xbdf75000] for group 20
[ 22.546270] pci 0000:03:00.1: Setting identity map [0xbdf75000 - 0xbdf76000] for group 20
[ 22.548969] pci 0000:03:00.1: Setting identity map [0xbdf76000 - 0xbdf77000] for group 20
[ 22.551801] pci 0000:03:00.1: Setting identity map [0xbdf77000 - 0xbdf78000] for group 20
[ 22.554471] pci 0000:03:00.1: Setting identity map [0xbdf78000 - 0xbdf79000] for group 20
[ 22.557096] pci 0000:03:00.1: Setting identity map [0xbdf79000 - 0xbdf7a000] for group 20
[ 22.559795] pci 0000:03:00.1: Setting identity map [0xbdf7a000 - 0xbdf7b000] for group 20
[ 22.562529] pci 0000:03:00.1: Setting identity map [0xbdf7b000 - 0xbdf7c000] for group 20
[ 22.565240] pci 0000:03:00.1: Setting identity map [0xbdf7c000 - 0xbdf7d000] for group 20
[ 22.567941] pci 0000:03:00.1: Setting identity map [0xbdf7d000 - 0xbdf7e000] for group 20
[ 22.570725] pci 0000:03:00.1: Setting identity map [0xbdf7e000 - 0xbdf7f000] for group 20
[ 22.573472] pci 0000:03:00.1: Setting identity map [0xbdf7f000 - 0xbdf80000] for group 20
[ 22.576160] pci 0000:03:00.1: Setting identity map [0xbdf80000 - 0xbdf81000] for group 20
[ 22.578883] pci Setting identity map [0xbdf81000 - 0xbdf82000] for group 20
[ 22.981597] pci 0000:03:00.1: Setting identity map [0xbdf82000 - 0xbdf83000] for group 20
[ 22.984383] pci 0000:03:00.1: Setting identity map [0xbdf83000 - 0xbdf84000] for group 20
[ 22.987477] pci 0000:03:00.1: Setting identity map [0xbdf84000 - 0xbdf85000] for group 20
[ 22.990217] pci 0000:03:00.1: Adding to iommu group 20
[ 22.992042] pci 0000:03:00.2: Adding to iommu group 20
[ 22.993837] pci 0000:03:00.3: Adding to iommu group 20
[ 22.995635] pci 0000:02:00.0: Adding to iommu group 21
[ 22.998067] pci 0000:02:00.0: Using iommu dma mapping
[ 22.999885] pci 0000:04:00.0: Adding to iommu group 22
[ 23.001683] pci 0000:05:02.0: Adding to iommu group 23
[ 23.003458] pci 0000:05:04.0: Adding to iommu group 24
[ 23.005189] pci 0000:06:00.0: Adding to iommu group 23
[ 23.007671] pci 0000:06:00.0: DMAR: Setting identity map [0xe8000 - 0xe8fff]
[ 23.010100] pci 0000:06:00.0: DMAR: Setting identity map [0xf4000 - 0xf4fff]
[ 23.012512] pci 0000:06:00.0: DMAR: Setting identity map [0xbdf6e000 - 0xbdf6efff]
[ 23.015026] pci 0000:06:00.0: DMAR: Setting identity map [0xbdf6f000 - 0xbdf7efff]
[ 23.017526] pci 0000:06:00.0: DMAR:map [0xbdf7f000 - 0xbdf82fff]
[ 23.519906] pci 0000:06:00.0: DMAR: Setting identity map [0xbdf83000 - 0xbdf84fff]
[ 23.522565] pci 0000:06:00.0: DMAR: Device uses a private dma domain.
[ 23.524746] pci 0000:06:00.1: Adding to iommu group 23
[ 23.527624] pci 0000:06:00.1: DMAR: Setting identity map [0xe8000 - 0xe8fff]
[ 23.530068] pci 0000:06:00.1: DMAR: Setting identity map [0xf4000 - 0xf4fff]
[ 23.532469] pci 0000:06:00.1: DMAR: Setting identity map [0xbdf6e000 - 0xbdf6efff]
[ 23.534990] pci 0000:06:00.1: DMAR: Setting identity map [0xbdf6f000 - 0xbdf7efff]
[ 23.537505] pci 0000:06:00.1: DMAR: Setting identity map [0xbdf7f000 - 0xbdf82fff]
[ 23.540005] pci 0000:06:00.1: DMAR: Setting identity map [0xbdf83000 - 0xbdf84fff]
[ 23.542588] pci 0000:06:00.1: DMAR: Device uses a private dma domain.
[ 23.544745] pci 0000:07:00.0: Adding to iommu group 24
[ 23.547493] pci 0000:07:00.0: DMAR: Setting identity map [0xe8000 - 0xe8fff]
[ 23.549882] pci 0000:07:00.0: DMAR: Setting identity map [0xf4000 - 0xf4fff]
[ 23.552241] pci 0000:07:00.0: DMAR: Setting identity map [0xbdf6e000 - 0xbdf6efff]
[ 23.554781] pci 0000:07:00.0: DMAR: Setting identity 0xbdf7efff]
[ 24.057156] pci 0000:07:00.0: DMAR: Setting identity map [0xbdf7f000 - 0xbdf82fff]
[ 24.059713] pci 0000:07:00.0: DMAR: Setting identity map [0xbdf83000 - 0xbdf84fff]
[ 24.062355] pci 0000:07:00.0: DMAR: Device uses a private dma domain.
[ 24.064527] pci 0000:07:00.1: Adding to iommu group 24
[ 24.067080] pci 0000:07:00.1: DMAR: Setting identity map [0xe8000 - 0xe8fff]
[ 24.069454] pci 0000:07:00.1: DMAR: Setting identity map [0xf4000 - 0xf4fff]
[ 24.071886] pci 0000:07:00.1: DMAR: Setting identity map [0xbdf6e000 - 0xbdf6efff]
[ 24.074449] pci 0000:07:00.1: DMAR: Setting identity map [0xbdf6f000 - 0xbdf7efff]
[ 24.076935] pci 0000:07:00.1: DMAR: Setting identity map [0xbdf7f000 - 0xbdf82fff]
[ 24.079460] pci 0000:07:00.1: DMAR: Setting identity map [0xbdf83000 - 0xbdf84fff]
[ 24.082101] pci 0000:07:00.1: DMAR: Device uses a private dma domain.
[ 24.084437] pci 0000:01:00.0: Adding to iommu group 25
[ 24.087304] pci 0000:01:00.0: Using iommu dma mapping
[ 24.089151] pci 0000:01:00.1: Adding to iommu group 25
[ 24.090974] pci 0000:01:00.1: DMAR: Device uses a private identity domain.
[ 24.093322] pci 0000:01:00.2: Adding to iommu group 25
[ 24.095073] pci 0000:01:00iommu group 25
[ 24.496813] pci 0000:01:00.4: DMAR: Device uses a private identity domain.
[ 24.499147] pci 0000:20:00.0: Adding to iommu group 26
[ 24.501024] pci 0000:20:01.0: Adding to iommu group 27
[ 24.502809] pci 0000:20:01.1: Adding to iommu group 28
[ 24.504565] pci 0000:20:02.0: Adding to iommu group 29
[ 24.506303] pci 0000:20:02.1: Adding to iommu group 30
[ 24.508073] pci 0000:20:02.2: Adding to iommu group 31
[ 24.509843] pci 0000:20:02.3: Adding to iommu group 32
[ 24.511726] pci 0000:20:03.0: Adding to iommu group 33
[ 24.513520] pci 0000:20:03.1: Adding to iommu group 34
[ 24.515275] pci 0000:20:03.2: Adding to iommu group 35
[ 24.517049] pci 0000:20:03.3: Adding to iommu group 36
[ 24.519033] pci 0000:20:04.0: Adding to iommu group 37
[ 24.520935] pci 0000:20:04.1: Adding to iommu group 37
[ 24.522714] pci 0000:20:04.2: Adding to iommu group 37
[ 24.524498] pci 0000:20:04.3: Adding to iommu group 37
[ 24.526242] pci 0000:20:04.4: Adding to iommu group 37
[ 24.528055] pci 0000:20:04.5: Adding to iommu group 37
[ 24.529829] pci 0000:20:04.6: Adding to iommu group 37
[ 24.531694] pci 0000:20:04.7: Adding to iommu group 37
[ 24.533545] pci 0000:20:05.0: Adding to iommu group 38
[ 24.535316] pci 0000:20:05.2: Adding to iommu group 38
[ 24.537106] pci 0000:20:05.4: Adding to iommu group 38
[ 24.538893] pci 0000:24:00.0: Adding to iommu group 39
[ 24.541532] pci 0000:24:00.0: Using iommu dma mapping
[ 24.543317] pci 0000:24:00.1: Adding to iommu group 40
[ 24.545811] pci 0000:24:00.1: Using iommu dma mapping
[ 24.547663] pci 0000:24:00.2: Adding to iommu group 41
[ 24.550232] pci 0000:24:00.2: Using iomm 24.962894] pci 0000:24:00.3: Adding to iommu group 42
[ 25.054536] pci 0000:24:00.3: Using iommu dma mapping
[ 25.056415] pci 0000:1f:08.0: Adding to iommu group 43
[ 25.058192] pci 0000:1f:08.3: Adding to iommu group 43
[ 25.060061] pci 0000:1f:08.4: Adding to iommu group 43
[ 25.061907] pci 0000:1f:09.0: Adding to iommu group 44
[ 25.063712] pci 0000:1f:09.3: Adding to iommu group 44
[ 25.065540] pci 0000:1f:09.4: Adding to iommu group 44
[ 25.067393] pci 0000:1f:0a.0: Adding to iommu group 45
[ 25.069174] pci 0000:1f:0a.1: Adding to iommu group 45
[ 25.071034] pci 0000:1f:0a.2: Adding to iommu group 45
[ 25.072825] pci 0000:1f:0a.3: Adding to iommu group 45
[ 25.074653] pci 0000:1f:0b.0: Adding to iommu group 46
[ 25.076441] pci 0000:1f:0b.3: Adding to iommu group 46
[ 25.078287] pci 0000:1f:0c.0: Adding to iommu group 47
[ 25.080119] pci 0000:1f:0c.1: Adding to iommu group 47
[ 25.081922] pci 0000:1f:0c.2: Adding to iommu group 47
[ 25.083703] pci 0000:1f:0c.6: Adding to iommu group 47
[ 25.085509] pci 0000:1f:0c.7: Adding to iommu group 47
[ 25.087669] pci 0000:1f:0d.0: Adding to iommu group 48
[ 25.089506] pci 0000:1f:0d.1: Adding to iommu group 48
[ 25.091349] pci 0000:1f:0d.2: Adding to[ 25.558963] pci 0000:1f:0d.6: Adding to iommu group 48
[ 25.595177] pci 0000:1f:0e.0: Adding to iommu group 49
[ 25.597051] pci 0000:1f:0e.1: Adding to iommu group 49
[ 25.599218] pci 0000:1f:0f.0: Adding to iommu group 50
[ 25.601170] pci 0000:1f:0f.1: Adding to iommu group 50
[ 25.603056] pci 0000:1f:0f.2: Adding to iommu group 50
[ 25.604894] pci 0000:1f:0f.3: Adding to iommu group 50
[ 25.606751] pci 0000:1f:0f.4: Adding to iommu group 50
[ 25.608594] pci 0000:1f:0f.5: Adding to iommu group 50
[ 25.610436] pci 0000:1f:0f.6: Adding to iommu group 50
[ 25.613043] pci 0000:1f:10.0: Adding to iommu group 51
[ 25.614906] pci 0000:1f:10.1: Adding to iommu group 51
[ 25.616759] pci 0000:1f:10.2: Adding to iommu group 51
[ 25.618603] pci 0000:1f:10.3: Adding to iommu group 51
[ 25.620458] pci 0000:1f:10.4: Adding to iommu group 51
[ 25.622266] pci 0000:1f:10.5: Adding to iommu group 51
[ 25.624154] pci 0000:1f:10.6: Adding to iommu group 51
[ 25.626088] pci 0000:1f:10.7: Adding to iommu group 51
[ 25.627980] pci 0000:1f:11.0: Adding to iommu group 52
[ 25.630043] pci 0000:1f:13.0: Adding to iommu 25.931279] pci 0000:1f:13.1: Adding to iommu group 53
[ 26.033506] pci 0000:1f:13.4: Adding to iommu group 53
[ 26.035287] pci 0000:1f:13.5: Adding to iommu group 53
[ 26.037070] pci 0000:1f:13.6: Adding to iommu group 53
[ 26.038925] pci 0000:3f:08.0: Adding to iommu group 54
[ 26.040799] pci 0000:3f:08.3: Adding to iommu group 54
[ 26.042586] pci 0000:3f:08.4: Adding to iommu group 54
[ 26.044397] pci 0000:3f:09.0: Adding to iommu group 55
[ 26.046198] pci 0000:3f:09.3: Adding to iommu group 55
[ 26.047991] pci 0000:3f:09.4: Adding to iommu group 55
[ 26.049854] pci 0000:3f:0a.0: Adding to iommu group 56
[ 26.051740] pci 0000:3f:0a.1: Adding to iommu group 56
[ 26.053526] pci 0000:3f:0a.2: Adding to iommu group 56
[ 26.055285] pci 0000:3f:0a.3: Adding to iommu group 56
[ 26.057294] pci 0000:3f:0b.0: Adding to iommu group 57
[ 26.059107] pci 0000:3f:0b.3: Adding to iommu group 57
[ 26.061092] pci 0000:3f:0c.0: Adding to iommu group 58
[ 26.062881] pci 0000:3f:0c.1: Adding to iommu group 58
[ 26.064666] pci 0000:3f:0c.2: Adding to iommu group 58
[ 26.066430] pci 0000:3f:0c.6: Adding to iommu group 58
[ 26.068214] pci 0g to iommu group 58
[ 26.570012] pci 0000:3f:0d.0: Adding to iommu group 59
[ 26.571914] pci 0000:3f:0d.1: Adding to iommu group 59
[ 26.573717] pci 0000:3f:0d.2: Adding to iommu group 59
[ 26.575480] pci 0000:3f:0d.6: Adding to iommu group 59
[ 26.577292] pci 0000:3f:0e.0: Adding to iommu group 60
[ 26.579095] pci 0000:3f:0e.1: Adding to iommu group 60
[ 26.581097] pci 0000:3f:0f.0: Adding to iommu group 61
[ 26.582907] pci 0000:3f:0f.1: Adding to iommu group 61
[ 26.584692] pci 0000:3f:0f.2: Adding to iommu group 61
[ 26.586468] pci 0000:3f:0f.3: Adding to iommu group 61
[ 26.588240] pci 0000:3f:0f.4: Adding to iommu group 61
[ 26.590054] pci 0000:3f:0f.5: Adding to iommu group 61
[ 26.591912] pci 0000:3f:0f.6: Adding to iommu group 61
[ 26.593870] pci 0000:3f:10.0: Adding to iommu group 62
[ 26.595927] pci 0000:3f:10.1: Adding to iommu group 62
[ 26.597721] pci 0000:3f:10.2: Adding to iommu group 62
[ 26.599485] pci 0000:3f:10.3: Adding to iommu group 62
[ 26.601364] pci 0000:3f:10.4: Adding to iommu group 62
[ 26.603161] pci 0000:3f:10.5: Adding to iommu group 62
[ 26.604967] pci 0000:3f:10.6: Adding to iommu group 62
[ 26.606804] pci 0000:3f:10.7: Adding to iommu group 62
[ 26.608566] pci 0000:3f:11.0: Adding to iommu group 63
[ 26.610464] pci 0000:3f:13.0: Adding to iommu group 64
[ 26.612655] pci 0000:3f:13.1: Adding to iommu group 64
[ 26.614433] pci 0000:3f:13.4: Adding to iommu group 64
[ 26.616233] pci 0000:3f:13.5: Adding to iommu group 64
[ 26.618007] Adding to iommu group 64
[ 27.119637] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 27.899649] DMAR: DRHD: handling fault status reg 2
[ 27.899649] DMAR: [DMA Read] Request device [02:00.0] PASID ffffffff fault addr bdf83000 [fault reason 06] PTE Read access is not set
[ 27.899649] DMAR: [DMA Read] Request device [01:00.2] PASID ffffffff fault addr f4000 [fault reason 06] PTE Read access is not set
[-- Attachment #3: Type: text/plain, Size: 156 bytes --]
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-06 7:24 ` Jerry Snitselaar
@ 2019-12-07 1:53 ` Lu Baolu
2019-12-07 2:29 ` Jerry Snitselaar
2019-12-08 6:04 ` Lu Baolu
1 sibling, 1 reply; 30+ messages in thread
From: Lu Baolu @ 2019-12-07 1:53 UTC (permalink / raw)
To: Jerry Snitselaar; +Cc: iommu
Hi Jerry,
On 12/6/19 3:24 PM, Jerry Snitselaar wrote:
> On Fri Dec 06 19, Lu Baolu wrote:
> [snip]
>>
>> Can you please try below change? Let's check whether the afending
>> address has been mapped for device 01.00.2.
>>
>> $ git diff
>> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
>> index db7bfd4f2d20..d9daf66be849 100644
>> --- a/drivers/iommu/iommu.c
>> +++ b/drivers/iommu/iommu.c
>> @@ -663,6 +663,8 @@ static int
>> iommu_group_create_direct_mappings(struct iommu_group *group,
>> ret = iommu_map(domain, addr, addr, pg_size,
>> entry->prot);
>> if (ret)
>> goto out;
>> +
>> + dev_info(dev, "Setting identity map [0x%Lx -
>> 0x%Lx] for group %d\n", addr, addr + pg_size, group->id);
>> }
>>
>> }
>>
>> I am doubting that device 01.00.2 is not in the device scope of
>>
>> [ 4.485108] DMAR: RMRR base: 0x000000bdf6f000 end: 0x000000bdf7efff
>>
>> By the way, does device 01.00.2 works well after binding the driver?
>>
>
> When I boot it with passthrough it doesn't get to a point where I can
> login. I think the serial console on these systems is tied to the ilo,
> so the conserver connection could be making things
> worse. Unfortunately the system is remote. I should have more time now
> to focus on debugging this.
>
> Attaching console output for the above patch.
It seems that device 01.00.2 isn't in the scope of RMRR [base:
0x000000bdf6f000 end: 0x000000bdf7efff]. But it still tries to access
the address within it, hence faults generated.
You can check it with ACPI/DMAR table.
Best regards,
baolu
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-07 1:53 ` Lu Baolu
@ 2019-12-07 2:29 ` Jerry Snitselaar
2019-12-07 2:41 ` Jerry Snitselaar
0 siblings, 1 reply; 30+ messages in thread
From: Jerry Snitselaar @ 2019-12-07 2:29 UTC (permalink / raw)
To: Lu Baolu; +Cc: iommu
On Sat Dec 07 19, Lu Baolu wrote:
>Hi Jerry,
>
>On 12/6/19 3:24 PM, Jerry Snitselaar wrote:
>>On Fri Dec 06 19, Lu Baolu wrote:
>>[snip]
>>>
>>>Can you please try below change? Let's check whether the afending
>>>address has been mapped for device 01.00.2.
>>>
>>>$ git diff
>>>diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
>>>index db7bfd4f2d20..d9daf66be849 100644
>>>--- a/drivers/iommu/iommu.c
>>>+++ b/drivers/iommu/iommu.c
>>>@@ -663,6 +663,8 @@ static int
>>>iommu_group_create_direct_mappings(struct iommu_group *group,
>>> ret = iommu_map(domain, addr, addr,
>>>pg_size, entry->prot);
>>> if (ret)
>>> goto out;
>>>+
>>>+ dev_info(dev, "Setting identity map [0x%Lx
>>>- 0x%Lx] for group %d\n", addr, addr + pg_size, group->id);
>>> }
>>>
>>> }
>>>
>>>I am doubting that device 01.00.2 is not in the device scope of
>>>
>>>[ 4.485108] DMAR: RMRR base: 0x000000bdf6f000 end: 0x000000bdf7efff
>>>
>>>By the way, does device 01.00.2 works well after binding the driver?
>>>
>>
>>When I boot it with passthrough it doesn't get to a point where I can
>>login. I think the serial console on these systems is tied to the ilo,
>>so the conserver connection could be making things
>>worse. Unfortunately the system is remote. I should have more time now
>>to focus on debugging this.
>>
>>Attaching console output for the above patch.
>
>It seems that device 01.00.2 isn't in the scope of RMRR [base:
>0x000000bdf6f000 end: 0x000000bdf7efff]. But it still tries to access
>the address within it, hence faults generated.
>
>You can check it with ACPI/DMAR table.
>
>Best regards,
>baolu
>
I believe it is the 3rd endpoint device entry in dmar data below.
So question about request_default_domain_for_dev. Since a dma mapping
is already done for 1.00.0, and that sets the default_domain for the
group (I think), won't it bail out for 1.00.2 at this check?
if (group->default_domain && group->default_domain->type == type)
goto out;
output from lspci -t:
\-[0000:00]-+-00.0
+-01.0-[08]--
+-01.1-[14]--
+-02.0-[03]--+-00.0
| +-00.1
| +-00.2
| \-00.3
+-02.1-[15]--
+-02.2-[02]----00.0
+-02.3-[16]--
+-03.0-[04-07]----00.0-[05-07]--+-02.0-[06]--+-00.0
| | \-00.1
| \-04.0-[07]--+-00.0
| \-00.1
+-03.1-[17]--
+-03.2-[18]--
+-03.3-[19]--
+-04.0
+-04.1
+-04.2
+-04.3
+-04.4
+-04.5
+-04.6
+-04.7
+-05.0
+-05.2
+-05.4
+-11.0-[1b]--
+-1a.0
+-1c.0-[0b]--
+-1c.7-[01]--+-00.0
| +-00.1
| +-00.2
| \-00.4
+-1d.0
+-1e.0-[1a]--
+-1f.0
\-1f.2
DMAR table entries for the RMRR:
[302h 0770 2] Subtable Type : 0001 [Reserved Memory Region]
[304h 0772 2] Length : 00CE
[306h 0774 2] Reserved : 0000
[308h 0776 2] PCI Segment Number : 0000
[30Ah 0778 8] Base Address : 00000000BDF6F000
[312h 0786 8] End Address (limit) : 00000000BDF7EFFF
[31Ah 0794 1] Device Scope Type : 01 [PCI Endpoint Device]
[31Bh 0795 1] Entry Length : 0A
[31Ch 0796 2] Reserved : 0000
[31Eh 0798 1] Enumeration ID : 00
[31Fh 0799 1] PCI Bus Number : 00
[320h 0800 2] PCI Path : 02,02
[322h 0802 2] PCI Path : 00,00
[324h 0804 1] Device Scope Type : 01 [PCI Endpoint Device]
[325h 0805 1] Entry Length : 0A
[326h 0806 2] Reserved : 0000
[328h 0808 1] Enumeration ID : 00
[329h 0809 1] PCI Bus Number : 00
[32Ah 0810 2] PCI Path : 1C,07
[32Ch 0812 2] PCI Path : 00,00
[32Eh 0814 1] Device Scope Type : 01 [PCI Endpoint Device]
[32Fh 0815 1] Entry Length : 0A
[330h 0816 2] Reserved : 0000
[332h 0818 1] Enumeration ID : 00
[333h 0819 1] PCI Bus Number : 00
[334h 0820 2] PCI Path : 1C,07
[336h 0822 2] PCI Path : 00,02
[338h 0824 1] Device Scope Type : 01 [PCI Endpoint Device]
[339h 0825 1] Entry Length : 08
[33Ah 0826 2] Reserved : 0000
[33Ch 0828 1] Enumeration ID : 00
[33Dh 0829 1] PCI Bus Number : 00
[33Eh 0830 2] PCI Path : 1F,02
[340h 0832 1] Device Scope Type : 01 [PCI Endpoint Device]
[341h 0833 1] Entry Length : 08
[342h 0834 2] Reserved : 0000
[344h 0836 1] Enumeration ID : 00
[345h 0837 1] PCI Bus Number : 00
[346h 0838 2] PCI Path : 1F,05
[348h 0840 1] Device Scope Type : 01 [PCI Endpoint Device]
[349h 0841 1] Entry Length : 0A
[34Ah 0842 2] Reserved : 0000
[34Ch 0844 1] Enumeration ID : 00
[34Dh 0845 1] PCI Bus Number : 00
[34Eh 0846 2] PCI Path : 02,00
[350h 0848 2] PCI Path : 00,00
[352h 0850 1] Device Scope Type : 01 [PCI Endpoint Device]
[353h 0851 1] Entry Length : 0A
[354h 0852 2] Reserved : 0000
[356h 0854 1] Enumeration ID : 00
[357h 0855 1] PCI Bus Number : 00
[358h 0856 2] PCI Path : 02,00
[35Ah 0858 2] PCI Path : 00,01
[35Ch 0860 1] Device Scope Type : 01 [PCI Endpoint Device]
[35Dh 0861 1] Entry Length : 0A
[35Eh 0862 2] Reserved : 0000
[360h 0864 1] Enumeration ID : 00
[361h 0865 1] PCI Bus Number : 00
[362h 0866 2] PCI Path : 02,00
[364h 0868 2] PCI Path : 00,02
[366h 0870 1] Device Scope Type : 01 [PCI Endpoint Device]
[367h 0871 1] Entry Length : 0A
[368h 0872 2] Reserved : 0000
[36Ah 0874 1] Enumeration ID : 00
[36Bh 0875 1] PCI Bus Number : 00
[36Ch 0876 2] PCI Path : 02,00
[36Eh 0878 2] PCI Path : 00,03
[370h 0880 1] Device Scope Type : 01 [PCI Endpoint Device]
[371h 0881 1] Entry Length : 0E
[372h 0882 2] Reserved : 0000
[374h 0884 1] Enumeration ID : 00
[375h 0885 1] PCI Bus Number : 00
[376h 0886 2] PCI Path : 03,00
[378h 0888 2] PCI Path : 00,00
[37Ah 0890 2] PCI Path : 02,00
[37Ch 0892 2] PCI Path : 00,00
[37Eh 0894 1] Device Scope Type : 01 [PCI Endpoint Device]
[37Fh 0895 1] Entry Length : 0E
[380h 0896 2] Reserved : 0000
[382h 0898 1] Enumeration ID : 00
[383h 0899 1] PCI Bus Number : 00
[384h 0900 2] PCI Path : 03,00
[386h 0902 2] PCI Path : 00,00
[388h 0904 2] PCI Path : 02,00
[38Ah 0906 2] PCI Path : 00,01
[38Ch 0908 1] Device Scope Type : 01 [PCI Endpoint Device]
[38Dh 0909 1] Entry Length : 0E
[38Eh 0910 2] Reserved : 0000
[390h 0912 1] Enumeration ID : 00
[391h 0913 1] PCI Bus Number : 00
[392h 0914 2] PCI Path : 03,00
[394h 0916 2] PCI Path : 00,00
[396h 0918 2] PCI Path : 04,00
[398h 0920 2] PCI Path : 00,00
[39Ah 0922 1] Device Scope Type : 01 [PCI Endpoint Device]
[39Bh 0923 1] Entry Length : 0E
[39Ch 0924 2] Reserved : 0000
[39Eh 0926 1] Enumeration ID : 00
[39Fh 0927 1] PCI Bus Number : 00
[3A0h 0928 2] PCI Path : 03,00
[3A2h 0930 2] PCI Path : 00,00
[3A4h 0932 2] PCI Path : 04,00
[3A6h 0934 2] PCI Path : 00,01
[3A8h 0936 1] Device Scope Type : 01 [PCI Endpoint Device]
[3A9h 0937 1] Entry Length : 0A
[3AAh 0938 2] Reserved : 0000
[3ACh 0940 1] Enumeration ID : 00
[3ADh 0941 1] PCI Bus Number : 20
[3AEh 0942 2] PCI Path : 02,02
[3B0h 0944 2] PCI Path : 00,00
[3B2h 0946 1] Device Scope Type : 01 [PCI Endpoint Device]
[3B3h 0947 1] Entry Length : 0A
[3B4h 0948 2] Reserved : 0000
[3B6h 0950 1] Enumeration ID : 00
[3B7h 0951 1] PCI Bus Number : 20
[3B8h 0952 2] PCI Path : 02,02
[3BAh 0954 2] PCI Path : 00,01
[3BCh 0956 1] Device Scope Type : 01 [PCI Endpoint Device]
[3BDh 0957 1] Entry Length : 0A
[3BEh 0958 2] Reserved : 0000
[3C0h 0960 1] Enumeration ID : 00
[3C1h 0961 1] PCI Bus Number : 20
[3C2h 0962 2] PCI Path : 02,02
[3C4h 0964 2] PCI Path : 00,02
[3C6h 0966 1] Device Scope Type : 01 [PCI Endpoint Device]
[3C7h 0967 1] Entry Length : 0A
[3C8h 0968 2] Reserved : 0000
[3CAh 0970 1] Enumeration ID : 00
[3CBh 0971 1] PCI Bus Number : 20
[3CCh 0972 2] PCI Path : 02,02
[3CEh 0974 2] PCI Path : 00,03
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-07 2:29 ` Jerry Snitselaar
@ 2019-12-07 2:41 ` Jerry Snitselaar
2019-12-08 6:26 ` Lu Baolu
0 siblings, 1 reply; 30+ messages in thread
From: Jerry Snitselaar @ 2019-12-07 2:41 UTC (permalink / raw)
To: Lu Baolu, iommu, Joerg Roedel
On Fri Dec 06 19, Jerry Snitselaar wrote:
>On Sat Dec 07 19, Lu Baolu wrote:
>>Hi Jerry,
>>
>>On 12/6/19 3:24 PM, Jerry Snitselaar wrote:
>>>On Fri Dec 06 19, Lu Baolu wrote:
>>>[snip]
>>>>
>>>>Can you please try below change? Let's check whether the afending
>>>>address has been mapped for device 01.00.2.
>>>>
>>>>$ git diff
>>>>diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
>>>>index db7bfd4f2d20..d9daf66be849 100644
>>>>--- a/drivers/iommu/iommu.c
>>>>+++ b/drivers/iommu/iommu.c
>>>>@@ -663,6 +663,8 @@ static int
>>>>iommu_group_create_direct_mappings(struct iommu_group *group,
>>>> ret = iommu_map(domain, addr, addr,
>>>>pg_size, entry->prot);
>>>> if (ret)
>>>> goto out;
>>>>+
>>>>+ dev_info(dev, "Setting identity map
>>>>[0x%Lx - 0x%Lx] for group %d\n", addr, addr + pg_size,
>>>>group->id);
>>>> }
>>>>
>>>> }
>>>>
>>>>I am doubting that device 01.00.2 is not in the device scope of
>>>>
>>>>[ 4.485108] DMAR: RMRR base: 0x000000bdf6f000 end: 0x000000bdf7efff
>>>>
>>>>By the way, does device 01.00.2 works well after binding the driver?
>>>>
>>>
>>>When I boot it with passthrough it doesn't get to a point where I can
>>>login. I think the serial console on these systems is tied to the ilo,
>>>so the conserver connection could be making things
>>>worse. Unfortunately the system is remote. I should have more time now
>>>to focus on debugging this.
>>>
>>>Attaching console output for the above patch.
>>
>>It seems that device 01.00.2 isn't in the scope of RMRR [base:
>>0x000000bdf6f000 end: 0x000000bdf7efff]. But it still tries to access
>>the address within it, hence faults generated.
>>
>>You can check it with ACPI/DMAR table.
>>
>>Best regards,
>>baolu
>>
>
>I believe it is the 3rd endpoint device entry in dmar data below.
>So question about request_default_domain_for_dev. Since a dma mapping
>is already done for 1.00.0, and that sets the default_domain for the
>group (I think), won't it bail out for 1.00.2 at this check?
>
> if (group->default_domain && group->default_domain->type == type)
> goto out;
>
Or I guess request_default_domain_for_dev wouldn't even be called for 1.00.2.
intel_iommu_add_device it wouldn't even call one of the request
functions with 1.00.2 since domain->type would be dma from 1.00.0, and device_def_domain_type
should return dma.
>
>output from lspci -t:
>
> \-[0000:00]-+-00.0
> +-01.0-[08]--
> +-01.1-[14]--
> +-02.0-[03]--+-00.0
> | +-00.1
> | +-00.2
> | \-00.3
> +-02.1-[15]--
> +-02.2-[02]----00.0
> +-02.3-[16]--
> +-03.0-[04-07]----00.0-[05-07]--+-02.0-[06]--+-00.0
> | | \-00.1
> | \-04.0-[07]--+-00.0
> | \-00.1
> +-03.1-[17]--
> +-03.2-[18]--
> +-03.3-[19]--
> +-04.0
> +-04.1
> +-04.2
> +-04.3
> +-04.4
> +-04.5
> +-04.6
> +-04.7
> +-05.0
> +-05.2
> +-05.4
> +-11.0-[1b]--
> +-1a.0
> +-1c.0-[0b]--
> +-1c.7-[01]--+-00.0
> | +-00.1
> | +-00.2
> | \-00.4
> +-1d.0
> +-1e.0-[1a]--
> +-1f.0
> \-1f.2
>
>DMAR table entries for the RMRR:
>
>[302h 0770 2] Subtable Type : 0001 [Reserved Memory Region]
>[304h 0772 2] Length : 00CE
>
>[306h 0774 2] Reserved : 0000
>[308h 0776 2] PCI Segment Number : 0000
>[30Ah 0778 8] Base Address : 00000000BDF6F000
>[312h 0786 8] End Address (limit) : 00000000BDF7EFFF
>
>[31Ah 0794 1] Device Scope Type : 01 [PCI Endpoint Device]
>[31Bh 0795 1] Entry Length : 0A
>[31Ch 0796 2] Reserved : 0000
>[31Eh 0798 1] Enumeration ID : 00
>[31Fh 0799 1] PCI Bus Number : 00
>
>[320h 0800 2] PCI Path : 02,02
>
>[322h 0802 2] PCI Path : 00,00
>
>
>[324h 0804 1] Device Scope Type : 01 [PCI Endpoint Device]
>[325h 0805 1] Entry Length : 0A
>[326h 0806 2] Reserved : 0000
>[328h 0808 1] Enumeration ID : 00
>[329h 0809 1] PCI Bus Number : 00
>
>[32Ah 0810 2] PCI Path : 1C,07
>
>[32Ch 0812 2] PCI Path : 00,00
>
>
>[32Eh 0814 1] Device Scope Type : 01 [PCI Endpoint Device]
>[32Fh 0815 1] Entry Length : 0A
>[330h 0816 2] Reserved : 0000
>[332h 0818 1] Enumeration ID : 00
>[333h 0819 1] PCI Bus Number : 00
>
>[334h 0820 2] PCI Path : 1C,07
>
>[336h 0822 2] PCI Path : 00,02
>
>
>[338h 0824 1] Device Scope Type : 01 [PCI Endpoint Device]
>[339h 0825 1] Entry Length : 08
>[33Ah 0826 2] Reserved : 0000
>[33Ch 0828 1] Enumeration ID : 00
>[33Dh 0829 1] PCI Bus Number : 00
>
>[33Eh 0830 2] PCI Path : 1F,02
>
>
>[340h 0832 1] Device Scope Type : 01 [PCI Endpoint Device]
>[341h 0833 1] Entry Length : 08
>[342h 0834 2] Reserved : 0000
>[344h 0836 1] Enumeration ID : 00
>[345h 0837 1] PCI Bus Number : 00
>
>[346h 0838 2] PCI Path : 1F,05
>
>
>[348h 0840 1] Device Scope Type : 01 [PCI Endpoint Device]
>[349h 0841 1] Entry Length : 0A
>[34Ah 0842 2] Reserved : 0000
>[34Ch 0844 1] Enumeration ID : 00
>[34Dh 0845 1] PCI Bus Number : 00
>
>[34Eh 0846 2] PCI Path : 02,00
>
>[350h 0848 2] PCI Path : 00,00
>
>
>[352h 0850 1] Device Scope Type : 01 [PCI Endpoint Device]
>[353h 0851 1] Entry Length : 0A
>[354h 0852 2] Reserved : 0000
>[356h 0854 1] Enumeration ID : 00
>[357h 0855 1] PCI Bus Number : 00
>
>[358h 0856 2] PCI Path : 02,00
>
>[35Ah 0858 2] PCI Path : 00,01
>
>
>[35Ch 0860 1] Device Scope Type : 01 [PCI Endpoint Device]
>[35Dh 0861 1] Entry Length : 0A
>[35Eh 0862 2] Reserved : 0000
>[360h 0864 1] Enumeration ID : 00
>[361h 0865 1] PCI Bus Number : 00
>
>[362h 0866 2] PCI Path : 02,00
>
>[364h 0868 2] PCI Path : 00,02
>
>
>[366h 0870 1] Device Scope Type : 01 [PCI Endpoint Device]
>[367h 0871 1] Entry Length : 0A
>[368h 0872 2] Reserved : 0000
>[36Ah 0874 1] Enumeration ID : 00
>[36Bh 0875 1] PCI Bus Number : 00
>
>[36Ch 0876 2] PCI Path : 02,00
>
>[36Eh 0878 2] PCI Path : 00,03
>
>
>[370h 0880 1] Device Scope Type : 01 [PCI Endpoint Device]
>[371h 0881 1] Entry Length : 0E
>[372h 0882 2] Reserved : 0000
>[374h 0884 1] Enumeration ID : 00
>[375h 0885 1] PCI Bus Number : 00
>
>[376h 0886 2] PCI Path : 03,00
>
>[378h 0888 2] PCI Path : 00,00
>
>[37Ah 0890 2] PCI Path : 02,00
>
>[37Ch 0892 2] PCI Path : 00,00
>
>
>[37Eh 0894 1] Device Scope Type : 01 [PCI Endpoint Device]
>[37Fh 0895 1] Entry Length : 0E
>[380h 0896 2] Reserved : 0000
>[382h 0898 1] Enumeration ID : 00
>[383h 0899 1] PCI Bus Number : 00
>
>[384h 0900 2] PCI Path : 03,00
>
>[386h 0902 2] PCI Path : 00,00
>
>[388h 0904 2] PCI Path : 02,00
>
>[38Ah 0906 2] PCI Path : 00,01
>
>
>[38Ch 0908 1] Device Scope Type : 01 [PCI Endpoint Device]
>[38Dh 0909 1] Entry Length : 0E
>[38Eh 0910 2] Reserved : 0000
>[390h 0912 1] Enumeration ID : 00
>[391h 0913 1] PCI Bus Number : 00
>
>[392h 0914 2] PCI Path : 03,00
>
>[394h 0916 2] PCI Path : 00,00
>
>[396h 0918 2] PCI Path : 04,00
>
>[398h 0920 2] PCI Path : 00,00
>
>
>[39Ah 0922 1] Device Scope Type : 01 [PCI Endpoint Device]
>[39Bh 0923 1] Entry Length : 0E
>[39Ch 0924 2] Reserved : 0000
>[39Eh 0926 1] Enumeration ID : 00
>[39Fh 0927 1] PCI Bus Number : 00
>
>[3A0h 0928 2] PCI Path : 03,00
>
>[3A2h 0930 2] PCI Path : 00,00
>
>[3A4h 0932 2] PCI Path : 04,00
>
>[3A6h 0934 2] PCI Path : 00,01
>
>
>[3A8h 0936 1] Device Scope Type : 01 [PCI Endpoint Device]
>[3A9h 0937 1] Entry Length : 0A
>[3AAh 0938 2] Reserved : 0000
>[3ACh 0940 1] Enumeration ID : 00
>[3ADh 0941 1] PCI Bus Number : 20
>
>[3AEh 0942 2] PCI Path : 02,02
>
>[3B0h 0944 2] PCI Path : 00,00
>
>
>[3B2h 0946 1] Device Scope Type : 01 [PCI Endpoint Device]
>[3B3h 0947 1] Entry Length : 0A
>[3B4h 0948 2] Reserved : 0000
>[3B6h 0950 1] Enumeration ID : 00
>[3B7h 0951 1] PCI Bus Number : 20
>
>[3B8h 0952 2] PCI Path : 02,02
>
>[3BAh 0954 2] PCI Path : 00,01
>
>
>[3BCh 0956 1] Device Scope Type : 01 [PCI Endpoint Device]
>[3BDh 0957 1] Entry Length : 0A
>[3BEh 0958 2] Reserved : 0000
>[3C0h 0960 1] Enumeration ID : 00
>[3C1h 0961 1] PCI Bus Number : 20
>
>[3C2h 0962 2] PCI Path : 02,02
>
>[3C4h 0964 2] PCI Path : 00,02
>
>
>[3C6h 0966 1] Device Scope Type : 01 [PCI Endpoint Device]
>[3C7h 0967 1] Entry Length : 0A
>[3C8h 0968 2] Reserved : 0000
>[3CAh 0970 1] Enumeration ID : 00
>[3CBh 0971 1] PCI Bus Number : 20
>
>[3CCh 0972 2] PCI Path : 02,02
>
>[3CEh 0974 2] PCI Path : 00,03
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-06 7:24 ` Jerry Snitselaar
2019-12-07 1:53 ` Lu Baolu
@ 2019-12-08 6:04 ` Lu Baolu
1 sibling, 0 replies; 30+ messages in thread
From: Lu Baolu @ 2019-12-08 6:04 UTC (permalink / raw)
To: Jerry Snitselaar; +Cc: iommu
Hi Jerry,
On 12/6/19 3:24 PM, Jerry Snitselaar wrote:
> On Fri Dec 06 19, Lu Baolu wrote:
> [snip]
>>
>> Can you please try below change? Let's check whether the afending
>> address has been mapped for device 01.00.2.
>>
>> $ git diff
>> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
>> index db7bfd4f2d20..d9daf66be849 100644
>> --- a/drivers/iommu/iommu.c
>> +++ b/drivers/iommu/iommu.c
>> @@ -663,6 +663,8 @@ static int
>> iommu_group_create_direct_mappings(struct iommu_group *group,
>> ret = iommu_map(domain, addr, addr, pg_size,
>> entry->prot);
>> if (ret)
>> goto out;
>> +
>> + dev_info(dev, "Setting identity map [0x%Lx -
>> 0x%Lx] for group %d\n", addr, addr + pg_size, group->id);
>> }
>>
>> }
>>
>> I am doubting that device 01.00.2 is not in the device scope of
>>
>> [ 4.485108] DMAR: RMRR base: 0x000000bdf6f000 end: 0x000000bdf7efff
>>
>> By the way, does device 01.00.2 works well after binding the driver?
>>
>
> When I boot it with passthrough it doesn't get to a point where I can
> login. I think the serial console on these systems is tied to the ilo,
> so the conserver connection could be making things
> worse. Unfortunately the system is remote. I should have more time now
> to focus on debugging this.
>
> Attaching console output for the above patch.
It seems that device 01.00.2 is not in below RMRR
DMAR: RMRR base: 0x000000bdf6f000 end: 0x000000bdf7efff
but it still tries to access the memory address within it. Hence IOMMU
faults generated.
You can check it with the ACPI/DMAR table.
Best regards,
baolu
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-07 2:41 ` Jerry Snitselaar
@ 2019-12-08 6:26 ` Lu Baolu
2019-12-10 0:52 ` Jerry Snitselaar
0 siblings, 1 reply; 30+ messages in thread
From: Lu Baolu @ 2019-12-08 6:26 UTC (permalink / raw)
To: Jerry Snitselaar, iommu, Joerg Roedel
Hi,
On 12/7/19 10:41 AM, Jerry Snitselaar wrote:
> On Fri Dec 06 19, Jerry Snitselaar wrote:
>> On Sat Dec 07 19, Lu Baolu wrote:
>>> Hi Jerry,
>>>
>>> On 12/6/19 3:24 PM, Jerry Snitselaar wrote:
>>>> On Fri Dec 06 19, Lu Baolu wrote:
>>>> [snip]
>>>>>
>>>>> Can you please try below change? Let's check whether the afending
>>>>> address has been mapped for device 01.00.2.
>>>>>
>>>>> $ git diff
>>>>> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
>>>>> index db7bfd4f2d20..d9daf66be849 100644
>>>>> --- a/drivers/iommu/iommu.c
>>>>> +++ b/drivers/iommu/iommu.c
>>>>> @@ -663,6 +663,8 @@ static int
>>>>> iommu_group_create_direct_mappings(struct iommu_group *group,
>>>>> ret = iommu_map(domain, addr, addr, pg_size,
>>>>> entry->prot);
>>>>> if (ret)
>>>>> goto out;
>>>>> +
>>>>> + dev_info(dev, "Setting identity map [0x%Lx
>>>>> - 0x%Lx] for group %d\n", addr, addr + pg_size, group->id);
>>>>> }
>>>>>
>>>>> }
>>>>>
>>>>> I am doubting that device 01.00.2 is not in the device scope of
>>>>>
>>>>> [ 4.485108] DMAR: RMRR base: 0x000000bdf6f000 end: 0x000000bdf7efff
>>>>>
>>>>> By the way, does device 01.00.2 works well after binding the driver?
>>>>>
>>>>
>>>> When I boot it with passthrough it doesn't get to a point where I can
>>>> login. I think the serial console on these systems is tied to the ilo,
>>>> so the conserver connection could be making things
>>>> worse. Unfortunately the system is remote. I should have more time now
>>>> to focus on debugging this.
>>>>
>>>> Attaching console output for the above patch.
>>>
>>> It seems that device 01.00.2 isn't in the scope of RMRR [base:
>>> 0x000000bdf6f000 end: 0x000000bdf7efff]. But it still tries to access
>>> the address within it, hence faults generated.
>>>
>>> You can check it with ACPI/DMAR table.
>>>
>>> Best regards,
>>> baolu
>>>
>>
>> I believe it is the 3rd endpoint device entry in dmar data below.
>> So question about request_default_domain_for_dev. Since a dma mapping
>> is already done for 1.00.0, and that sets the default_domain for the
>> group (I think), won't it bail out for 1.00.2 at this check?
>>
>> if (group->default_domain && group->default_domain->type == type)
>> goto out;
>>
>
> Or I guess request_default_domain_for_dev wouldn't even be called for
> 1.00.2.
> intel_iommu_add_device it wouldn't even call one of the request
> functions with 1.00.2 since domain->type would be dma from 1.00.0, and
> device_def_domain_type
> should return dma.
Can you please add some debug messages and check what really happens
here?
Best regards,
baolu
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-08 6:26 ` Lu Baolu
@ 2019-12-10 0:52 ` Jerry Snitselaar
2019-12-10 1:29 ` Lu Baolu
0 siblings, 1 reply; 30+ messages in thread
From: Jerry Snitselaar @ 2019-12-10 0:52 UTC (permalink / raw)
To: Lu Baolu; +Cc: iommu
On Sun Dec 08 19, Lu Baolu wrote:
>Hi,
>
>On 12/7/19 10:41 AM, Jerry Snitselaar wrote:
>>On Fri Dec 06 19, Jerry Snitselaar wrote:
>>>On Sat Dec 07 19, Lu Baolu wrote:
>>>>Hi Jerry,
>>>>
>>>>On 12/6/19 3:24 PM, Jerry Snitselaar wrote:
>>>>>On Fri Dec 06 19, Lu Baolu wrote:
>>>>>[snip]
>>>>>>
>>>>>>Can you please try below change? Let's check whether the afending
>>>>>>address has been mapped for device 01.00.2.
>>>>>>
>>>>>>$ git diff
>>>>>>diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
>>>>>>index db7bfd4f2d20..d9daf66be849 100644
>>>>>>--- a/drivers/iommu/iommu.c
>>>>>>+++ b/drivers/iommu/iommu.c
>>>>>>@@ -663,6 +663,8 @@ static int
>>>>>>iommu_group_create_direct_mappings(struct iommu_group
>>>>>>*group,
>>>>>> ret = iommu_map(domain, addr, addr,
>>>>>>pg_size, entry->prot);
>>>>>> if (ret)
>>>>>> goto out;
>>>>>>+
>>>>>>+ dev_info(dev, "Setting identity map
>>>>>>[0x%Lx - 0x%Lx] for group %d\n", addr, addr + pg_size,
>>>>>>group->id);
>>>>>> }
>>>>>>
>>>>>> }
>>>>>>
>>>>>>I am doubting that device 01.00.2 is not in the device scope of
>>>>>>
>>>>>>[ 4.485108] DMAR: RMRR base: 0x000000bdf6f000 end: 0x000000bdf7efff
>>>>>>
>>>>>>By the way, does device 01.00.2 works well after binding the driver?
>>>>>>
>>>>>
>>>>>When I boot it with passthrough it doesn't get to a point where I can
>>>>>login. I think the serial console on these systems is tied to the ilo,
>>>>>so the conserver connection could be making things
>>>>>worse. Unfortunately the system is remote. I should have more time now
>>>>>to focus on debugging this.
>>>>>
>>>>>Attaching console output for the above patch.
>>>>
>>>>It seems that device 01.00.2 isn't in the scope of RMRR [base:
>>>>0x000000bdf6f000 end: 0x000000bdf7efff]. But it still tries to access
>>>>the address within it, hence faults generated.
>>>>
>>>>You can check it with ACPI/DMAR table.
>>>>
>>>>Best regards,
>>>>baolu
>>>>
>>>
>>>I believe it is the 3rd endpoint device entry in dmar data below.
>>>So question about request_default_domain_for_dev. Since a dma mapping
>>>is already done for 1.00.0, and that sets the default_domain for the
>>>group (I think), won't it bail out for 1.00.2 at this check?
>>>
>>> if (group->default_domain && group->default_domain->type == type)
>>> goto out;
>>>
>>
>>Or I guess request_default_domain_for_dev wouldn't even be called
>>for 1.00.2.
>>intel_iommu_add_device it wouldn't even call one of the request
>>functions with 1.00.2 since domain->type would be dma from 1.00.0,
>>and device_def_domain_type
>>should return dma.
>
>Can you please add some debug messages and check what really happens
>here?
>
>Best regards,
>baolu
>
[ 25.000544] pci 0000:01:00.0: Adding to iommu group 25
[ 25.502243] pci 0000:01:00.0: DMAR: domain->type is identity << intel_iommu_add_device (alloced in iommu_group_get_for_dev)
[ 25.504239] pci 0000:01:00.0: DMAR: device default domain type is dma. requesting dma domain << intel_iommu_add_device
[ 25.507954] pci 0000:01:00.0: Using iommu dma mapping << request_default_domain_for_dev (now default domain for group is dma)
[ 25.509765] pci 0000:01:00.1: Adding to iommu group 25
[ 25.511514] pci 0000:01:00.1: DMAR: domain->type is dma << intel_iommu_add_device
[ 25.513263] pci 0000:01:00.1: DMAR: device default domain type is identity. requesting identity domain << intel_iommu_add_device
[ 25.516435] pci 0000:01:00.1: don't change mappings of existing devices. << request_default_domain_for_dev
[ 25.518669] pci 0000:01:00.1: DMAR: Device uses a private identity domain. << intel_iommu_add_device
[ 25.521061] pci 0000:01:00.2: Adding to iommu group 25
[ 25.522791] pci 0000:01:00.2: DMAR: domain->type is dma << intel_iommu_add_device
[ 25.524706] pci 0000:01:00.4: Adding to iommu group 25
[ 25.526458] pci 0000:01:00.4: DMAR: domain->type is dma << intel_iommu_add_device
[ 25.528213] pci 0000:01:00.4: DMAR: device default domain type is identity. requesting identity domain << intel_iommu_add_device
[ 25.531284] pci 0000:01:00.4: don't change mappings of existing devices. << request_default_domain_for_dev
[ 25.533500] pci 0000:01:00.4: DMAR: Device uses a private identity domain. << intel_iommu_add_device
So the domain type is dma after 01:00.0 gets added, and when
intel_iommu_add_device is called for 01:00.2 it will go into the if
section. Since the device default domain type for 01:00.2 is dma
nothing happens in there, and it goes on to 01:00.4. Is the "private
identity domain" message really accurate since everyone will use
si_domain? Adding some more debugging.
Regards,
Jerry
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-10 0:52 ` Jerry Snitselaar
@ 2019-12-10 1:29 ` Lu Baolu
2019-12-10 3:47 ` Jerry Snitselaar
0 siblings, 1 reply; 30+ messages in thread
From: Lu Baolu @ 2019-12-10 1:29 UTC (permalink / raw)
To: Jerry Snitselaar; +Cc: iommu
Hi,
On 12/10/19 8:52 AM, Jerry Snitselaar wrote:
> On Sun Dec 08 19, Lu Baolu wrote:
>> Hi,
>>
>> On 12/7/19 10:41 AM, Jerry Snitselaar wrote:
>>> On Fri Dec 06 19, Jerry Snitselaar wrote:
>>>> On Sat Dec 07 19, Lu Baolu wrote:
>>>>> Hi Jerry,
>>>>>
>>>>> On 12/6/19 3:24 PM, Jerry Snitselaar wrote:
>>>>>> On Fri Dec 06 19, Lu Baolu wrote:
>>>>>> [snip]
>>>>>>>
>>>>>>> Can you please try below change? Let's check whether the afending
>>>>>>> address has been mapped for device 01.00.2.
>>>>>>>
>>>>>>> $ git diff
>>>>>>> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
>>>>>>> index db7bfd4f2d20..d9daf66be849 100644
>>>>>>> --- a/drivers/iommu/iommu.c
>>>>>>> +++ b/drivers/iommu/iommu.c
>>>>>>> @@ -663,6 +663,8 @@ static int
>>>>>>> iommu_group_create_direct_mappings(struct iommu_group *group,
>>>>>>> ret = iommu_map(domain, addr, addr,
>>>>>>> pg_size, entry->prot);
>>>>>>> if (ret)
>>>>>>> goto out;
>>>>>>> +
>>>>>>> + dev_info(dev, "Setting identity map
>>>>>>> [0x%Lx - 0x%Lx] for group %d\n", addr, addr + pg_size, group->id);
>>>>>>> }
>>>>>>>
>>>>>>> }
>>>>>>>
>>>>>>> I am doubting that device 01.00.2 is not in the device scope of
>>>>>>>
>>>>>>> [ 4.485108] DMAR: RMRR base: 0x000000bdf6f000 end:
>>>>>>> 0x000000bdf7efff
>>>>>>>
>>>>>>> By the way, does device 01.00.2 works well after binding the driver?
>>>>>>>
>>>>>>
>>>>>> When I boot it with passthrough it doesn't get to a point where I can
>>>>>> login. I think the serial console on these systems is tied to the
>>>>>> ilo,
>>>>>> so the conserver connection could be making things
>>>>>> worse. Unfortunately the system is remote. I should have more time
>>>>>> now
>>>>>> to focus on debugging this.
>>>>>>
>>>>>> Attaching console output for the above patch.
>>>>>
>>>>> It seems that device 01.00.2 isn't in the scope of RMRR [base:
>>>>> 0x000000bdf6f000 end: 0x000000bdf7efff]. But it still tries to access
>>>>> the address within it, hence faults generated.
>>>>>
>>>>> You can check it with ACPI/DMAR table.
>>>>>
>>>>> Best regards,
>>>>> baolu
>>>>>
>>>>
>>>> I believe it is the 3rd endpoint device entry in dmar data below.
>>>> So question about request_default_domain_for_dev. Since a dma mapping
>>>> is already done for 1.00.0, and that sets the default_domain for the
>>>> group (I think), won't it bail out for 1.00.2 at this check?
>>>>
>>>> if (group->default_domain && group->default_domain->type == type)
>>>> goto out;
>>>>
>>>
>>> Or I guess request_default_domain_for_dev wouldn't even be called for
>>> 1.00.2.
>>> intel_iommu_add_device it wouldn't even call one of the request
>>> functions with 1.00.2 since domain->type would be dma from 1.00.0,
>>> and device_def_domain_type
>>> should return dma.
>>
>> Can you please add some debug messages and check what really happens
>> here?
>>
>> Best regards,
>> baolu
>>
>
> [ 25.000544] pci 0000:01:00.0: Adding to iommu group 25
> [ 25.502243] pci 0000:01:00.0: DMAR: domain->type is identity <<
> intel_iommu_add_device (alloced in iommu_group_get_for_dev)
> [ 25.504239] pci 0000:01:00.0: DMAR: device default domain type is
> dma. requesting dma domain << intel_iommu_add_device
> [ 25.507954] pci 0000:01:00.0: Using iommu dma mapping <<
> request_default_domain_for_dev (now default domain for group is dma)
> [ 25.509765] pci 0000:01:00.1: Adding to iommu group 25
> [ 25.511514] pci 0000:01:00.1: DMAR: domain->type is dma <<
> intel_iommu_add_device
> [ 25.513263] pci 0000:01:00.1: DMAR: device default domain type is
> identity. requesting identity domain << intel_iommu_add_device
> [ 25.516435] pci 0000:01:00.1: don't change mappings of existing
> devices. << request_default_domain_for_dev
> [ 25.518669] pci 0000:01:00.1: DMAR: Device uses a private identity
> domain. << intel_iommu_add_device
> [ 25.521061] pci 0000:01:00.2: Adding to iommu group 25
> [ 25.522791] pci 0000:01:00.2: DMAR: domain->type is dma <<
> intel_iommu_add_device
> [ 25.524706] pci 0000:01:00.4: Adding to iommu group 25
> [ 25.526458] pci 0000:01:00.4: DMAR: domain->type is dma <<
> intel_iommu_add_device
> [ 25.528213] pci 0000:01:00.4: DMAR: device default domain type is
> identity. requesting identity domain << intel_iommu_add_device
> [ 25.531284] pci 0000:01:00.4: don't change mappings of existing
> devices. << request_default_domain_for_dev
> [ 25.533500] pci 0000:01:00.4: DMAR: Device uses a private identity
> domain. << intel_iommu_add_device
>
> So the domain type is dma after 01:00.0 gets added, and when
> intel_iommu_add_device is called for 01:00.2 it will go into the if
> section. Since the device default domain type for 01:00.2 is dma
> nothing happens in there, and it goes on to 01:00.4. Is the "private
> identity domain" message really accurate since everyone will use
> si_domain? Adding some more debugging.
The facts that we have seen:
1) 01.00.2 uses the default domain in group 25. The domain type of this
default domain is DMA.
2) iommu_group_create_direct_mappings() *should* be called when adding
01.00.2 into group 25. As the result, RMRR for this device *should*
be identity mapped.
3) By checking DMAR table, RMRR (0x000000bdf6f000 ~ 0x000000bdf7efff) is
reported for device 01.00.2.
The problem is that RMRR (0x000000bdf6f000 ~ 0x000000bdf7efff) hasn't
actually been mapped, as the result IOMMU faults generated when device
try to access this range.
So I guess you could add more debug message to check why
iommu_group_create_direct_mappings() doesn't do the right thing?
Best regards,
baolu
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-10 1:29 ` Lu Baolu
@ 2019-12-10 3:47 ` Jerry Snitselaar
2019-12-10 5:03 ` Lu Baolu
2019-12-10 5:18 ` Jerry Snitselaar
0 siblings, 2 replies; 30+ messages in thread
From: Jerry Snitselaar @ 2019-12-10 3:47 UTC (permalink / raw)
To: Lu Baolu; +Cc: iommu
On Tue Dec 10 19, Lu Baolu wrote:
>Hi,
>
>On 12/10/19 8:52 AM, Jerry Snitselaar wrote:
>>On Sun Dec 08 19, Lu Baolu wrote:
>>>Hi,
>>>
>>>On 12/7/19 10:41 AM, Jerry Snitselaar wrote:
>>>>On Fri Dec 06 19, Jerry Snitselaar wrote:
>>>>>On Sat Dec 07 19, Lu Baolu wrote:
>>>>>>Hi Jerry,
>>>>>>
>>>>>>On 12/6/19 3:24 PM, Jerry Snitselaar wrote:
>>>>>>>On Fri Dec 06 19, Lu Baolu wrote:
>>>>>>>[snip]
>>>>>>>>
>>>>>>>>Can you please try below change? Let's check whether the afending
>>>>>>>>address has been mapped for device 01.00.2.
>>>>>>>>
>>>>>>>>$ git diff
>>>>>>>>diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
>>>>>>>>index db7bfd4f2d20..d9daf66be849 100644
>>>>>>>>--- a/drivers/iommu/iommu.c
>>>>>>>>+++ b/drivers/iommu/iommu.c
>>>>>>>>@@ -663,6 +663,8 @@ static int
>>>>>>>>iommu_group_create_direct_mappings(struct iommu_group
>>>>>>>>*group,
>>>>>>>> ret = iommu_map(domain, addr,
>>>>>>>>addr, pg_size, entry->prot);
>>>>>>>> if (ret)
>>>>>>>> goto out;
>>>>>>>>+
>>>>>>>>+ dev_info(dev, "Setting identity
>>>>>>>>map [0x%Lx - 0x%Lx] for group %d\n", addr, addr +
>>>>>>>>pg_size, group->id);
>>>>>>>> }
>>>>>>>>
>>>>>>>> }
>>>>>>>>
>>>>>>>>I am doubting that device 01.00.2 is not in the device scope of
>>>>>>>>
>>>>>>>>[ 4.485108] DMAR: RMRR base: 0x000000bdf6f000 end:
>>>>>>>>0x000000bdf7efff
>>>>>>>>
>>>>>>>>By the way, does device 01.00.2 works well after binding the driver?
>>>>>>>>
>>>>>>>
>>>>>>>When I boot it with passthrough it doesn't get to a point where I can
>>>>>>>login. I think the serial console on these systems is tied
>>>>>>>to the ilo,
>>>>>>>so the conserver connection could be making things
>>>>>>>worse. Unfortunately the system is remote. I should have
>>>>>>>more time now
>>>>>>>to focus on debugging this.
>>>>>>>
>>>>>>>Attaching console output for the above patch.
>>>>>>
>>>>>>It seems that device 01.00.2 isn't in the scope of RMRR [base:
>>>>>>0x000000bdf6f000 end: 0x000000bdf7efff]. But it still tries to access
>>>>>>the address within it, hence faults generated.
>>>>>>
>>>>>>You can check it with ACPI/DMAR table.
>>>>>>
>>>>>>Best regards,
>>>>>>baolu
>>>>>>
>>>>>
>>>>>I believe it is the 3rd endpoint device entry in dmar data below.
>>>>>So question about request_default_domain_for_dev. Since a dma mapping
>>>>>is already done for 1.00.0, and that sets the default_domain for the
>>>>>group (I think), won't it bail out for 1.00.2 at this check?
>>>>>
>>>>> if (group->default_domain && group->default_domain->type == type)
>>>>> goto out;
>>>>>
>>>>
>>>>Or I guess request_default_domain_for_dev wouldn't even be
>>>>called for 1.00.2.
>>>>intel_iommu_add_device it wouldn't even call one of the request
>>>>functions with 1.00.2 since domain->type would be dma from
>>>>1.00.0, and device_def_domain_type
>>>>should return dma.
>>>
>>>Can you please add some debug messages and check what really happens
>>>here?
>>>
>>>Best regards,
>>>baolu
>>>
>>
>>[ 25.000544] pci 0000:01:00.0: Adding to iommu group 25
>>[ 25.502243] pci 0000:01:00.0: DMAR: domain->type is identity <<
>>intel_iommu_add_device (alloced in iommu_group_get_for_dev)
>>[ 25.504239] pci 0000:01:00.0: DMAR: device default domain type is
>>dma. requesting dma domain << intel_iommu_add_device
>>[ 25.507954] pci 0000:01:00.0: Using iommu dma mapping <<
>>request_default_domain_for_dev (now default domain for group is
>>dma)
>>[ 25.509765] pci 0000:01:00.1: Adding to iommu group 25
>>[ 25.511514] pci 0000:01:00.1: DMAR: domain->type is dma <<
>>intel_iommu_add_device
>>[ 25.513263] pci 0000:01:00.1: DMAR: device default domain type is
>>identity. requesting identity domain << intel_iommu_add_device
>>[ 25.516435] pci 0000:01:00.1: don't change mappings of existing
>>devices. << request_default_domain_for_dev
>>[ 25.518669] pci 0000:01:00.1: DMAR: Device uses a private
>>identity domain. << intel_iommu_add_device
>>[ 25.521061] pci 0000:01:00.2: Adding to iommu group 25
>>[ 25.522791] pci 0000:01:00.2: DMAR: domain->type is dma <<
>>intel_iommu_add_device
>>[ 25.524706] pci 0000:01:00.4: Adding to iommu group 25
>>[ 25.526458] pci 0000:01:00.4: DMAR: domain->type is dma <<
>>intel_iommu_add_device
>>[ 25.528213] pci 0000:01:00.4: DMAR: device default domain type is
>>identity. requesting identity domain << intel_iommu_add_device
>>[ 25.531284] pci 0000:01:00.4: don't change mappings of existing
>>devices. << request_default_domain_for_dev
>>[ 25.533500] pci 0000:01:00.4: DMAR: Device uses a private
>>identity domain. << intel_iommu_add_device
>>
>>So the domain type is dma after 01:00.0 gets added, and when
>>intel_iommu_add_device is called for 01:00.2 it will go into the if
>>section. Since the device default domain type for 01:00.2 is dma
>>nothing happens in there, and it goes on to 01:00.4. Is the "private
>>identity domain" message really accurate since everyone will use
>>si_domain? Adding some more debugging.
>
>The facts that we have seen:
>
>1) 01.00.2 uses the default domain in group 25. The domain type of this
> default domain is DMA.
>
>2) iommu_group_create_direct_mappings() *should* be called when adding
> 01.00.2 into group 25. As the result, RMRR for this device *should*
> be identity mapped.
>
>3) By checking DMAR table, RMRR (0x000000bdf6f000 ~ 0x000000bdf7efff) is
> reported for device 01.00.2.
>
>The problem is that RMRR (0x000000bdf6f000 ~ 0x000000bdf7efff) hasn't
>actually been mapped, as the result IOMMU faults generated when device
>try to access this range.
>
>So I guess you could add more debug message to check why
>iommu_group_create_direct_mappings() doesn't do the right thing?
>
>Best regards,
>baolu
>
A call to iommu_map is failing.
[ 36.686881] pci 0000:01:00.2: iommu_group_add_device: calling iommu_group_create_direct_mappings
[ 36.689843] pci 0000:01:00.2: iommu_group_create_direct_mappings: iterating through mappings
[ 36.692757] pci 0000:01:00.2: iommu_group_create_direct_mappings: calling apply_resv_region
[ 36.695526] pci 0000:01:00.2: e_direct_mappings: entry type is direct
[ 37.198053] iommu: iommu_map: ops->map failed iova 0xbddde000 pa 0x00000000bddde000 pgsize 0x1000
[ 37.201357] pci 0000:01:00.2: iommu_group_create_direct_mappings: iommu_map failed
[ 37.203973] pci 0000:01:00.2: iommu_group_create_direct_mappings: leaving func
[ 37.206385] pci 0000:01:00.2: iommu_group_add_device: calling __iommu_attach_device
[ 37.208950] pci 0000:01:00.2: Adding to iommu group 25
[ 37.210660] pci 0000:01:00.2: DMAR: domain->type is dma
Also fails for 01:00.4:
[ 37.212448] pci 0000:01:00.4: iommu_group_add_device: calling iommu_group_create_direct_mappings
[ 37.215382] pci 0000:01:00.4: iommu_group_create_direct_mappings: iterating through mappings
[ 37.218170] pci 0000:01:00.4: iommu_group_create_direct_mappings: calling apply_resv_region
[ 37.220933] pci 0000:01:00.4: iommu_group_create_direct_mappings: entry type is direct-relaxable
[ 37.223932] iommu: iommu_map: ops->map failed iova 0xbddde000 pa 0x00000000bddde000 pgsize 0x1000
[ 37.226857] pci 0000:01:00.4: iommu_group_create_direct_mappings: iommu_map failed
[ 37.229300] pci 0000:01:00.4: iommu_group_create_direct_mappings: leaving func
[ 37.231648] pci 0000:01:00.4: iommu_group_add_device: calling __iommu_attach_device
[ 37.234194] pci 0000:01:00.4: Adding to iommu group 25
[ 37.236192] pci 0000:01:00.4: DMAR: domain->type is dma
[ 37.237958] pci 0000:01:00.4: DMAR: device default domain type is identity. requesting identity domain
[ 37.241061] pci 0000:01:00.4: don't change mappings of existing d37.489870] pci 0000:01:00.4: DMAR: Device uses a private identity domain.
There is an RMRR for 0xbddde000-0xddddefff:
[63Ah 1594 2] Subtable Type : 0001 [Reserved Memory Region]
[63Ch 1596 2] Length : 0036
[63Eh 1598 2] Reserved : 0000
[640h 1600 2] PCI Segment Number : 0000
[642h 1602 8] Base Address : 00000000BDDDE000
[64Ah 1610 8] End Address (limit) : 00000000BDDDEFFF
[652h 1618 1] Device Scope Type : 01 [PCI Endpoint Device]
[653h 1619 1] Entry Length : 0A
[654h 1620 2] Reserved : 0000
[656h 1622 1] Enumeration ID : 00
[657h 1623 1] PCI Bus Number : 00
[658h 1624 2] PCI Path : 1C,07
[65Ah 1626 2] PCI Path : 00,00
[65Ch 1628 1] Device Scope Type : 01 [PCI Endpoint Device]
[65Dh 1629 1] Entry Length : 0A
[65Eh 1630 2] Reserved : 0000
[660h 1632 1] Enumeration ID : 00
[661h 1633 1] PCI Bus Number : 00
[662h 1634 2] PCI Path : 1C,07
[664h 1636 2] PCI Path : 00,02
[666h 1638 1] Device Scope Type : 01 [PCI Endpoint Device]
[667h 1639 1] Entry Length : 0A
[668h 1640 2] Reserved : 0000
[66Ah 1642 1] Enumeration ID : 00
[66Bh 1643 1] PCI Bus Number : 00
[66Ch 1644 2] PCI Path : 1C,07
[66Eh 1646 2] PCI Path : 00,04
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-10 3:47 ` Jerry Snitselaar
@ 2019-12-10 5:03 ` Lu Baolu
2019-12-10 5:18 ` Jerry Snitselaar
1 sibling, 0 replies; 30+ messages in thread
From: Lu Baolu @ 2019-12-10 5:03 UTC (permalink / raw)
To: Jerry Snitselaar; +Cc: iommu
Hi,
On 12/10/19 11:47 AM, Jerry Snitselaar wrote:
>>>
>>> So the domain type is dma after 01:00.0 gets added, and when
>>> intel_iommu_add_device is called for 01:00.2 it will go into the if
>>> section. Since the device default domain type for 01:00.2 is dma
>>> nothing happens in there, and it goes on to 01:00.4. Is the "private
>>> identity domain" message really accurate since everyone will use
>>> si_domain? Adding some more debugging.
>>
>> The facts that we have seen:
>>
>> 1) 01.00.2 uses the default domain in group 25. The domain type of this
>> default domain is DMA.
>>
>> 2) iommu_group_create_direct_mappings() *should* be called when adding
>> 01.00.2 into group 25. As the result, RMRR for this device *should*
>> be identity mapped.
>>
>> 3) By checking DMAR table, RMRR (0x000000bdf6f000 ~ 0x000000bdf7efff) is
>> reported for device 01.00.2.
>>
>> The problem is that RMRR (0x000000bdf6f000 ~ 0x000000bdf7efff) hasn't
>> actually been mapped, as the result IOMMU faults generated when device
>> try to access this range.
>>
>> So I guess you could add more debug message to check why
>> iommu_group_create_direct_mappings() doesn't do the right thing?
>>
>> Best regards,
>> baolu
>>
>
> A call to iommu_map is failing.
>
> [ 36.686881] pci 0000:01:00.2: iommu_group_add_device: calling
> iommu_group_create_direct_mappings
> [ 36.689843] pci 0000:01:00.2: iommu_group_create_direct_mappings:
> iterating through mappings
> [ 36.692757] pci 0000:01:00.2: iommu_group_create_direct_mappings:
> calling apply_resv_region
> [ 36.695526] pci 0000:01:00.2: e_direct_mappings: entry type is direct
> [ 37.198053] iommu: iommu_map: ops->map failed iova 0xbddde000 pa
> 0x00000000bddde000 pgsize 0x1000
So can you further check why intel_iomm_map() fails here?
Best regards,
baolu
> [ 37.201357] pci 0000:01:00.2: iommu_group_create_direct_mappings:
> iommu_map failed
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-10 3:47 ` Jerry Snitselaar
2019-12-10 5:03 ` Lu Baolu
@ 2019-12-10 5:18 ` Jerry Snitselaar
2019-12-10 5:43 ` Lu Baolu
2019-12-10 5:43 ` Jerry Snitselaar
1 sibling, 2 replies; 30+ messages in thread
From: Jerry Snitselaar @ 2019-12-10 5:18 UTC (permalink / raw)
To: Lu Baolu, iommu, Joerg Roedel
On Mon Dec 09 19, Jerry Snitselaar wrote:
[snip]
>
>A call to iommu_map is failing.
>
>[ 36.686881] pci 0000:01:00.2: iommu_group_add_device: calling iommu_group_create_direct_mappings
>[ 36.689843] pci 0000:01:00.2: iommu_group_create_direct_mappings: iterating through mappings
>[ 36.692757] pci 0000:01:00.2: iommu_group_create_direct_mappings: calling apply_resv_region
>[ 36.695526] pci 0000:01:00.2: e_direct_mappings: entry type is direct
>[ 37.198053] iommu: iommu_map: ops->map failed iova 0xbddde000 pa 0x00000000bddde000 pgsize 0x1000
>[ 37.201357] pci 0000:01:00.2: iommu_group_create_direct_mappings: iommu_map failed
>[ 37.203973] pci 0000:01:00.2: iommu_group_create_direct_mappings: leaving func
>[ 37.206385] pci 0000:01:00.2: iommu_group_add_device: calling __iommu_attach_device
>[ 37.208950] pci 0000:01:00.2: Adding to iommu group 25
>[ 37.210660] pci 0000:01:00.2: DMAR: domain->type is dma
>
It bails at the dmar_domain->flags & DOMAIN_FLAG_LOSE_CHILDREN check
at the beginning of intel_iommu_map. I will verify, but it looks like
that is getting set when intel_iommu_add_device is called for 01:00.1.
request_default_domain_for_dev for 01:00.1 will return -EBUSY because
iommu_group_device_count(group) != 1.
>Also fails for 01:00.4:
>
>[ 37.212448] pci 0000:01:00.4: iommu_group_add_device: calling iommu_group_create_direct_mappings
>[ 37.215382] pci 0000:01:00.4: iommu_group_create_direct_mappings: iterating through mappings
>[ 37.218170] pci 0000:01:00.4: iommu_group_create_direct_mappings: calling apply_resv_region
>[ 37.220933] pci 0000:01:00.4: iommu_group_create_direct_mappings: entry type is direct-relaxable
>[ 37.223932] iommu: iommu_map: ops->map failed iova 0xbddde000 pa 0x00000000bddde000 pgsize 0x1000
>[ 37.226857] pci 0000:01:00.4: iommu_group_create_direct_mappings: iommu_map failed
>[ 37.229300] pci 0000:01:00.4: iommu_group_create_direct_mappings: leaving func
>[ 37.231648] pci 0000:01:00.4: iommu_group_add_device: calling __iommu_attach_device
>[ 37.234194] pci 0000:01:00.4: Adding to iommu group 25
>[ 37.236192] pci 0000:01:00.4: DMAR: domain->type is dma
>[ 37.237958] pci 0000:01:00.4: DMAR: device default domain type is identity. requesting identity domain
>[ 37.241061] pci 0000:01:00.4: don't change mappings of existing d37.489870] pci 0000:01:00.4: DMAR: Device uses a private identity domain.
>
>There is an RMRR for 0xbddde000-0xddddefff:
>
>[63Ah 1594 2] Subtable Type : 0001 [Reserved Memory Region]
>[63Ch 1596 2] Length : 0036
>
>[63Eh 1598 2] Reserved : 0000
>[640h 1600 2] PCI Segment Number : 0000
>[642h 1602 8] Base Address : 00000000BDDDE000
>[64Ah 1610 8] End Address (limit) : 00000000BDDDEFFF
>
>[652h 1618 1] Device Scope Type : 01 [PCI Endpoint Device]
>[653h 1619 1] Entry Length : 0A
>[654h 1620 2] Reserved : 0000
>[656h 1622 1] Enumeration ID : 00
>[657h 1623 1] PCI Bus Number : 00
>
>[658h 1624 2] PCI Path : 1C,07
>
>[65Ah 1626 2] PCI Path : 00,00
>
>
>[65Ch 1628 1] Device Scope Type : 01 [PCI Endpoint Device]
>[65Dh 1629 1] Entry Length : 0A
>[65Eh 1630 2] Reserved : 0000
>[660h 1632 1] Enumeration ID : 00
>[661h 1633 1] PCI Bus Number : 00
>
>[662h 1634 2] PCI Path : 1C,07
>
>[664h 1636 2] PCI Path : 00,02
>
>
>[666h 1638 1] Device Scope Type : 01 [PCI Endpoint Device]
>[667h 1639 1] Entry Length : 0A
>[668h 1640 2] Reserved : 0000
>[66Ah 1642 1] Enumeration ID : 00
>[66Bh 1643 1] PCI Bus Number : 00
>
>[66Ch 1644 2] PCI Path : 1C,07
>
>[66Eh 1646 2] PCI Path : 00,04
>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-10 5:18 ` Jerry Snitselaar
@ 2019-12-10 5:43 ` Lu Baolu
2019-12-10 22:12 ` Jerry Snitselaar
2019-12-10 5:43 ` Jerry Snitselaar
1 sibling, 1 reply; 30+ messages in thread
From: Lu Baolu @ 2019-12-10 5:43 UTC (permalink / raw)
To: Jerry Snitselaar, iommu, Joerg Roedel
Hi,
On 12/10/19 1:18 PM, Jerry Snitselaar wrote:
> On Mon Dec 09 19, Jerry Snitselaar wrote:
> [snip]
>>
>> A call to iommu_map is failing.
>>
>> [ 36.686881] pci 0000:01:00.2: iommu_group_add_device: calling
>> iommu_group_create_direct_mappings
>> [ 36.689843] pci 0000:01:00.2: iommu_group_create_direct_mappings:
>> iterating through mappings
>> [ 36.692757] pci 0000:01:00.2: iommu_group_create_direct_mappings:
>> calling apply_resv_region
>> [ 36.695526] pci 0000:01:00.2: e_direct_mappings: entry type is direct
>> [ 37.198053] iommu: iommu_map: ops->map failed iova 0xbddde000 pa
>> 0x00000000bddde000 pgsize 0x1000
>> [ 37.201357] pci 0000:01:00.2: iommu_group_create_direct_mappings:
>> iommu_map failed
>> [ 37.203973] pci 0000:01:00.2: iommu_group_create_direct_mappings:
>> leaving func
>> [ 37.206385] pci 0000:01:00.2: iommu_group_add_device: calling
>> __iommu_attach_device
>> [ 37.208950] pci 0000:01:00.2: Adding to iommu group 25
>> [ 37.210660] pci 0000:01:00.2: DMAR: domain->type is dma
>>
>
> It bails at the dmar_domain->flags & DOMAIN_FLAG_LOSE_CHILDREN check
> at the beginning of intel_iommu_map. I will verify, but it looks like
> that is getting set when intel_iommu_add_device is called for 01:00.1.
> request_default_domain_for_dev for 01:00.1 will return -EBUSY because
> iommu_group_device_count(group) != 1.
Okay, I will send you a fix patch later. Thanks!
Best regards,
baolu
>
>> Also fails for 01:00.4:
>>
>> [ 37.212448] pci 0000:01:00.4: iommu_group_add_device: calling
>> iommu_group_create_direct_mappings
>> [ 37.215382] pci 0000:01:00.4: iommu_group_create_direct_mappings:
>> iterating through mappings
>> [ 37.218170] pci 0000:01:00.4: iommu_group_create_direct_mappings:
>> calling apply_resv_region
>> [ 37.220933] pci 0000:01:00.4: iommu_group_create_direct_mappings:
>> entry type is direct-relaxable
>> [ 37.223932] iommu: iommu_map: ops->map failed iova 0xbddde000 pa
>> 0x00000000bddde000 pgsize 0x1000
>> [ 37.226857] pci 0000:01:00.4: iommu_group_create_direct_mappings:
>> iommu_map failed
>> [ 37.229300] pci 0000:01:00.4: iommu_group_create_direct_mappings:
>> leaving func
>> [ 37.231648] pci 0000:01:00.4: iommu_group_add_device: calling
>> __iommu_attach_device
>> [ 37.234194] pci 0000:01:00.4: Adding to iommu group 25
>> [ 37.236192] pci 0000:01:00.4: DMAR: domain->type is dma
>> [ 37.237958] pci 0000:01:00.4: DMAR: device default domain type is
>> identity. requesting identity domain
>> [ 37.241061] pci 0000:01:00.4: don't change mappings of existing
>> d37.489870] pci 0000:01:00.4: DMAR: Device uses a private identity
>> domain.
>>
>> There is an RMRR for 0xbddde000-0xddddefff:
>>
>> [63Ah 1594 2] Subtable Type : 0001 [Reserved Memory
>> Region]
>> [63Ch 1596 2] Length : 0036
>>
>> [63Eh 1598 2] Reserved : 0000
>> [640h 1600 2] PCI Segment Number : 0000
>> [642h 1602 8] Base Address : 00000000BDDDE000
>> [64Ah 1610 8] End Address (limit) : 00000000BDDDEFFF
>>
>> [652h 1618 1] Device Scope Type : 01 [PCI Endpoint Device]
>> [653h 1619 1] Entry Length : 0A
>> [654h 1620 2] Reserved : 0000
>> [656h 1622 1] Enumeration ID : 00
>> [657h 1623 1] PCI Bus Number : 00
>>
>> [658h 1624 2] PCI Path : 1C,07
>>
>> [65Ah 1626 2] PCI Path : 00,00
>>
>>
>> [65Ch 1628 1] Device Scope Type : 01 [PCI Endpoint Device]
>> [65Dh 1629 1] Entry Length : 0A
>> [65Eh 1630 2] Reserved : 0000
>> [660h 1632 1] Enumeration ID : 00
>> [661h 1633 1] PCI Bus Number : 00
>>
>> [662h 1634 2] PCI Path : 1C,07
>>
>> [664h 1636 2] PCI Path : 00,02
>>
>>
>> [666h 1638 1] Device Scope Type : 01 [PCI Endpoint Device]
>> [667h 1639 1] Entry Length : 0A
>> [668h 1640 2] Reserved : 0000
>> [66Ah 1642 1] Enumeration ID : 00
>> [66Bh 1643 1] PCI Bus Number : 00
>>
>> [66Ch 1644 2] PCI Path : 1C,07
>>
>> [66Eh 1646 2] PCI Path : 00,04
>>
>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-10 5:18 ` Jerry Snitselaar
2019-12-10 5:43 ` Lu Baolu
@ 2019-12-10 5:43 ` Jerry Snitselaar
2019-12-10 6:16 ` Jerry Snitselaar
1 sibling, 1 reply; 30+ messages in thread
From: Jerry Snitselaar @ 2019-12-10 5:43 UTC (permalink / raw)
To: Lu Baolu, iommu, Joerg Roedel
On Mon Dec 09 19, Jerry Snitselaar wrote:
>On Mon Dec 09 19, Jerry Snitselaar wrote:
>[snip]
>>
>>A call to iommu_map is failing.
>>
>>[ 36.686881] pci 0000:01:00.2: iommu_group_add_device: calling iommu_group_create_direct_mappings
>>[ 36.689843] pci 0000:01:00.2: iommu_group_create_direct_mappings: iterating through mappings
>>[ 36.692757] pci 0000:01:00.2: iommu_group_create_direct_mappings: calling apply_resv_region
>>[ 36.695526] pci 0000:01:00.2: e_direct_mappings: entry type is direct
>>[ 37.198053] iommu: iommu_map: ops->map failed iova 0xbddde000 pa 0x00000000bddde000 pgsize 0x1000
>>[ 37.201357] pci 0000:01:00.2: iommu_group_create_direct_mappings: iommu_map failed
>>[ 37.203973] pci 0000:01:00.2: iommu_group_create_direct_mappings: leaving func
>>[ 37.206385] pci 0000:01:00.2: iommu_group_add_device: calling __iommu_attach_device
>>[ 37.208950] pci 0000:01:00.2: Adding to iommu group 25
>>[ 37.210660] pci 0000:01:00.2: DMAR: domain->type is dma
>>
>
>It bails at the dmar_domain->flags & DOMAIN_FLAG_LOSE_CHILDREN check
>at the beginning of intel_iommu_map. I will verify, but it looks like
>that is getting set when intel_iommu_add_device is called for 01:00.1.
>request_default_domain_for_dev for 01:00.1 will return -EBUSY because
>iommu_group_device_count(group) != 1.
>
Also I see 01:00.0 and others that are the first in a group exiting iommu_group_create_direct_mappings
at the (!domain || domain->type != IOMMU_DOMAIN_DMA) check. In request_default_domain_for_dev default_domain
doesn't getting set until after that call. Should the iommu_group_create_direct_mappings call be moved below
where group->default_domain gets set?
>>Also fails for 01:00.4:
>>
>>[ 37.212448] pci 0000:01:00.4: iommu_group_add_device: calling iommu_group_create_direct_mappings
>>[ 37.215382] pci 0000:01:00.4: iommu_group_create_direct_mappings: iterating through mappings
>>[ 37.218170] pci 0000:01:00.4: iommu_group_create_direct_mappings: calling apply_resv_region
>>[ 37.220933] pci 0000:01:00.4: iommu_group_create_direct_mappings: entry type is direct-relaxable
>>[ 37.223932] iommu: iommu_map: ops->map failed iova 0xbddde000 pa 0x00000000bddde000 pgsize 0x1000
>>[ 37.226857] pci 0000:01:00.4: iommu_group_create_direct_mappings: iommu_map failed
>>[ 37.229300] pci 0000:01:00.4: iommu_group_create_direct_mappings: leaving func
>>[ 37.231648] pci 0000:01:00.4: iommu_group_add_device: calling __iommu_attach_device
>>[ 37.234194] pci 0000:01:00.4: Adding to iommu group 25
>>[ 37.236192] pci 0000:01:00.4: DMAR: domain->type is dma
>>[ 37.237958] pci 0000:01:00.4: DMAR: device default domain type is identity. requesting identity domain
>>[ 37.241061] pci 0000:01:00.4: don't change mappings of existing d37.489870] pci 0000:01:00.4: DMAR: Device uses a private identity domain.
>>
>>There is an RMRR for 0xbddde000-0xddddefff:
>>
>>[63Ah 1594 2] Subtable Type : 0001 [Reserved Memory Region]
>>[63Ch 1596 2] Length : 0036
>>
>>[63Eh 1598 2] Reserved : 0000
>>[640h 1600 2] PCI Segment Number : 0000
>>[642h 1602 8] Base Address : 00000000BDDDE000
>>[64Ah 1610 8] End Address (limit) : 00000000BDDDEFFF
>>
>>[652h 1618 1] Device Scope Type : 01 [PCI Endpoint Device]
>>[653h 1619 1] Entry Length : 0A
>>[654h 1620 2] Reserved : 0000
>>[656h 1622 1] Enumeration ID : 00
>>[657h 1623 1] PCI Bus Number : 00
>>
>>[658h 1624 2] PCI Path : 1C,07
>>
>>[65Ah 1626 2] PCI Path : 00,00
>>
>>
>>[65Ch 1628 1] Device Scope Type : 01 [PCI Endpoint Device]
>>[65Dh 1629 1] Entry Length : 0A
>>[65Eh 1630 2] Reserved : 0000
>>[660h 1632 1] Enumeration ID : 00
>>[661h 1633 1] PCI Bus Number : 00
>>
>>[662h 1634 2] PCI Path : 1C,07
>>
>>[664h 1636 2] PCI Path : 00,02
>>
>>
>>[666h 1638 1] Device Scope Type : 01 [PCI Endpoint Device]
>>[667h 1639 1] Entry Length : 0A
>>[668h 1640 2] Reserved : 0000
>>[66Ah 1642 1] Enumeration ID : 00
>>[66Bh 1643 1] PCI Bus Number : 00
>>
>>[66Ch 1644 2] PCI Path : 1C,07
>>
>>[66Eh 1646 2] PCI Path : 00,04
>>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-10 5:43 ` Jerry Snitselaar
@ 2019-12-10 6:16 ` Jerry Snitselaar
2019-12-10 6:26 ` Lu Baolu
0 siblings, 1 reply; 30+ messages in thread
From: Jerry Snitselaar @ 2019-12-10 6:16 UTC (permalink / raw)
To: Lu Baolu, iommu, Joerg Roedel
On Mon Dec 09 19, Jerry Snitselaar wrote:
>On Mon Dec 09 19, Jerry Snitselaar wrote:
>>On Mon Dec 09 19, Jerry Snitselaar wrote:
>>[snip]
>>>
>>>A call to iommu_map is failing.
>>>
>>>[ 36.686881] pci 0000:01:00.2: iommu_group_add_device: calling iommu_group_create_direct_mappings
>>>[ 36.689843] pci 0000:01:00.2: iommu_group_create_direct_mappings: iterating through mappings
>>>[ 36.692757] pci 0000:01:00.2: iommu_group_create_direct_mappings: calling apply_resv_region
>>>[ 36.695526] pci 0000:01:00.2: e_direct_mappings: entry type is direct
>>>[ 37.198053] iommu: iommu_map: ops->map failed iova 0xbddde000 pa 0x00000000bddde000 pgsize 0x1000
>>>[ 37.201357] pci 0000:01:00.2: iommu_group_create_direct_mappings: iommu_map failed
>>>[ 37.203973] pci 0000:01:00.2: iommu_group_create_direct_mappings: leaving func
>>>[ 37.206385] pci 0000:01:00.2: iommu_group_add_device: calling __iommu_attach_device
>>>[ 37.208950] pci 0000:01:00.2: Adding to iommu group 25
>>>[ 37.210660] pci 0000:01:00.2: DMAR: domain->type is dma
>>>
>>
>>It bails at the dmar_domain->flags & DOMAIN_FLAG_LOSE_CHILDREN check
>>at the beginning of intel_iommu_map. I will verify, but it looks like
>>that is getting set when intel_iommu_add_device is called for 01:00.1.
>>request_default_domain_for_dev for 01:00.1 will return -EBUSY because
>>iommu_group_device_count(group) != 1.
>>
>
>Also I see 01:00.0 and others that are the first in a group exiting iommu_group_create_direct_mappings
>at the (!domain || domain->type != IOMMU_DOMAIN_DMA) check. In request_default_domain_for_dev default_domain
>doesn't getting set until after that call. Should the iommu_group_create_direct_mappings call be moved below
>where group->default_domain gets set?
>
Doing this the system boots, and I don't get any dmar pte read errors. I still see the map failing because
of the DOMAIN_FLAG_LOSE_CHILDREN in those cases mentioned above, but it no longer is spitting out tons of
dmar pte read errors.
>>>Also fails for 01:00.4:
>>>
>>>[ 37.212448] pci 0000:01:00.4: iommu_group_add_device: calling iommu_group_create_direct_mappings
>>>[ 37.215382] pci 0000:01:00.4: iommu_group_create_direct_mappings: iterating through mappings
>>>[ 37.218170] pci 0000:01:00.4: iommu_group_create_direct_mappings: calling apply_resv_region
>>>[ 37.220933] pci 0000:01:00.4: iommu_group_create_direct_mappings: entry type is direct-relaxable
>>>[ 37.223932] iommu: iommu_map: ops->map failed iova 0xbddde000 pa 0x00000000bddde000 pgsize 0x1000
>>>[ 37.226857] pci 0000:01:00.4: iommu_group_create_direct_mappings: iommu_map failed
>>>[ 37.229300] pci 0000:01:00.4: iommu_group_create_direct_mappings: leaving func
>>>[ 37.231648] pci 0000:01:00.4: iommu_group_add_device: calling __iommu_attach_device
>>>[ 37.234194] pci 0000:01:00.4: Adding to iommu group 25
>>>[ 37.236192] pci 0000:01:00.4: DMAR: domain->type is dma
>>>[ 37.237958] pci 0000:01:00.4: DMAR: device default domain type is identity. requesting identity domain
>>>[ 37.241061] pci 0000:01:00.4: don't change mappings of existing d37.489870] pci 0000:01:00.4: DMAR: Device uses a private identity domain.
>>>
>>>There is an RMRR for 0xbddde000-0xddddefff:
>>>
>>>[63Ah 1594 2] Subtable Type : 0001 [Reserved Memory Region]
>>>[63Ch 1596 2] Length : 0036
>>>
>>>[63Eh 1598 2] Reserved : 0000
>>>[640h 1600 2] PCI Segment Number : 0000
>>>[642h 1602 8] Base Address : 00000000BDDDE000
>>>[64Ah 1610 8] End Address (limit) : 00000000BDDDEFFF
>>>
>>>[652h 1618 1] Device Scope Type : 01 [PCI Endpoint Device]
>>>[653h 1619 1] Entry Length : 0A
>>>[654h 1620 2] Reserved : 0000
>>>[656h 1622 1] Enumeration ID : 00
>>>[657h 1623 1] PCI Bus Number : 00
>>>
>>>[658h 1624 2] PCI Path : 1C,07
>>>
>>>[65Ah 1626 2] PCI Path : 00,00
>>>
>>>
>>>[65Ch 1628 1] Device Scope Type : 01 [PCI Endpoint Device]
>>>[65Dh 1629 1] Entry Length : 0A
>>>[65Eh 1630 2] Reserved : 0000
>>>[660h 1632 1] Enumeration ID : 00
>>>[661h 1633 1] PCI Bus Number : 00
>>>
>>>[662h 1634 2] PCI Path : 1C,07
>>>
>>>[664h 1636 2] PCI Path : 00,02
>>>
>>>
>>>[666h 1638 1] Device Scope Type : 01 [PCI Endpoint Device]
>>>[667h 1639 1] Entry Length : 0A
>>>[668h 1640 2] Reserved : 0000
>>>[66Ah 1642 1] Enumeration ID : 00
>>>[66Bh 1643 1] PCI Bus Number : 00
>>>
>>>[66Ch 1644 2] PCI Path : 1C,07
>>>
>>>[66Eh 1646 2] PCI Path : 00,04
>>>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-10 6:16 ` Jerry Snitselaar
@ 2019-12-10 6:26 ` Lu Baolu
2019-12-10 7:44 ` Jerry Snitselaar
0 siblings, 1 reply; 30+ messages in thread
From: Lu Baolu @ 2019-12-10 6:26 UTC (permalink / raw)
To: Jerry Snitselaar, iommu, Joerg Roedel
Hi,
On 12/10/19 2:16 PM, Jerry Snitselaar wrote:
> On Mon Dec 09 19, Jerry Snitselaar wrote:
>> On Mon Dec 09 19, Jerry Snitselaar wrote:
>>> On Mon Dec 09 19, Jerry Snitselaar wrote:
>>> [snip]
>>>>
>>>> A call to iommu_map is failing.
>>>>
>>>> [ 36.686881] pci 0000:01:00.2: iommu_group_add_device: calling
>>>> iommu_group_create_direct_mappings
>>>> [ 36.689843] pci 0000:01:00.2: iommu_group_create_direct_mappings:
>>>> iterating through mappings
>>>> [ 36.692757] pci 0000:01:00.2: iommu_group_create_direct_mappings:
>>>> calling apply_resv_region
>>>> [ 36.695526] pci 0000:01:00.2: e_direct_mappings: entry type is
>>>> direct
>>>> [ 37.198053] iommu: iommu_map: ops->map failed iova 0xbddde000 pa
>>>> 0x00000000bddde000 pgsize 0x1000
>>>> [ 37.201357] pci 0000:01:00.2: iommu_group_create_direct_mappings:
>>>> iommu_map failed
>>>> [ 37.203973] pci 0000:01:00.2: iommu_group_create_direct_mappings:
>>>> leaving func
>>>> [ 37.206385] pci 0000:01:00.2: iommu_group_add_device: calling
>>>> __iommu_attach_device
>>>> [ 37.208950] pci 0000:01:00.2: Adding to iommu group 25
>>>> [ 37.210660] pci 0000:01:00.2: DMAR: domain->type is dma
>>>>
>>>
>>> It bails at the dmar_domain->flags & DOMAIN_FLAG_LOSE_CHILDREN check
>>> at the beginning of intel_iommu_map. I will verify, but it looks like
>>> that is getting set when intel_iommu_add_device is called for 01:00.1.
>>> request_default_domain_for_dev for 01:00.1 will return -EBUSY because
>>> iommu_group_device_count(group) != 1.
>>>
>>
>> Also I see 01:00.0 and others that are the first in a group exiting
>> iommu_group_create_direct_mappings
>> at the (!domain || domain->type != IOMMU_DOMAIN_DMA) check. In
>> request_default_domain_for_dev default_domain
>> doesn't getting set until after that call. Should the
>> iommu_group_create_direct_mappings call be moved below
>> where group->default_domain gets set?
>>
>
> Doing this the system boots, and I don't get any dmar pte read errors. I
> still see the map failing because
> of the DOMAIN_FLAG_LOSE_CHILDREN in those cases mentioned above, but it
> no longer is spitting out tons of
> dmar pte read errors.
You can post a patch if you think this is worth of.
Best regards,
baolu
>
>>>> Also fails for 01:00.4:
>>>>
>>>> [ 37.212448] pci 0000:01:00.4: iommu_group_add_device: calling
>>>> iommu_group_create_direct_mappings
>>>> [ 37.215382] pci 0000:01:00.4: iommu_group_create_direct_mappings:
>>>> iterating through mappings
>>>> [ 37.218170] pci 0000:01:00.4: iommu_group_create_direct_mappings:
>>>> calling apply_resv_region
>>>> [ 37.220933] pci 0000:01:00.4: iommu_group_create_direct_mappings:
>>>> entry type is direct-relaxable
>>>> [ 37.223932] iommu: iommu_map: ops->map failed iova 0xbddde000 pa
>>>> 0x00000000bddde000 pgsize 0x1000
>>>> [ 37.226857] pci 0000:01:00.4: iommu_group_create_direct_mappings:
>>>> iommu_map failed
>>>> [ 37.229300] pci 0000:01:00.4: iommu_group_create_direct_mappings:
>>>> leaving func
>>>> [ 37.231648] pci 0000:01:00.4: iommu_group_add_device: calling
>>>> __iommu_attach_device
>>>> [ 37.234194] pci 0000:01:00.4: Adding to iommu group 25
>>>> [ 37.236192] pci 0000:01:00.4: DMAR: domain->type is dma
>>>> [ 37.237958] pci 0000:01:00.4: DMAR: device default domain type is
>>>> identity. requesting identity domain
>>>> [ 37.241061] pci 0000:01:00.4: don't change mappings of existing
>>>> d37.489870] pci 0000:01:00.4: DMAR: Device uses a private identity
>>>> domain.
>>>>
>>>> There is an RMRR for 0xbddde000-0xddddefff:
>>>>
>>>> [63Ah 1594 2] Subtable Type : 0001 [Reserved Memory
>>>> Region]
>>>> [63Ch 1596 2] Length : 0036
>>>>
>>>> [63Eh 1598 2] Reserved : 0000
>>>> [640h 1600 2] PCI Segment Number : 0000
>>>> [642h 1602 8] Base Address : 00000000BDDDE000
>>>> [64Ah 1610 8] End Address (limit) : 00000000BDDDEFFF
>>>>
>>>> [652h 1618 1] Device Scope Type : 01 [PCI Endpoint Device]
>>>> [653h 1619 1] Entry Length : 0A
>>>> [654h 1620 2] Reserved : 0000
>>>> [656h 1622 1] Enumeration ID : 00
>>>> [657h 1623 1] PCI Bus Number : 00
>>>>
>>>> [658h 1624 2] PCI Path : 1C,07
>>>>
>>>> [65Ah 1626 2] PCI Path : 00,00
>>>>
>>>>
>>>> [65Ch 1628 1] Device Scope Type : 01 [PCI Endpoint Device]
>>>> [65Dh 1629 1] Entry Length : 0A
>>>> [65Eh 1630 2] Reserved : 0000
>>>> [660h 1632 1] Enumeration ID : 00
>>>> [661h 1633 1] PCI Bus Number : 00
>>>>
>>>> [662h 1634 2] PCI Path : 1C,07
>>>>
>>>> [664h 1636 2] PCI Path : 00,02
>>>>
>>>>
>>>> [666h 1638 1] Device Scope Type : 01 [PCI Endpoint Device]
>>>> [667h 1639 1] Entry Length : 0A
>>>> [668h 1640 2] Reserved : 0000
>>>> [66Ah 1642 1] Enumeration ID : 00
>>>> [66Bh 1643 1] PCI Bus Number : 00
>>>>
>>>> [66Ch 1644 2] PCI Path : 1C,07
>>>>
>>>> [66Eh 1646 2] PCI Path : 00,04
>>>>
>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-10 6:26 ` Lu Baolu
@ 2019-12-10 7:44 ` Jerry Snitselaar
0 siblings, 0 replies; 30+ messages in thread
From: Jerry Snitselaar @ 2019-12-10 7:44 UTC (permalink / raw)
To: Lu Baolu; +Cc: iommu
On Tue Dec 10 19, Lu Baolu wrote:
>Hi,
>
>On 12/10/19 2:16 PM, Jerry Snitselaar wrote:
>>On Mon Dec 09 19, Jerry Snitselaar wrote:
>>>On Mon Dec 09 19, Jerry Snitselaar wrote:
>>>>On Mon Dec 09 19, Jerry Snitselaar wrote:
>>>>[snip]
>>>>>
>>>>>A call to iommu_map is failing.
>>>>>
>>>>>[ 36.686881] pci 0000:01:00.2: iommu_group_add_device:
>>>>>calling iommu_group_create_direct_mappings
>>>>>[ 36.689843] pci 0000:01:00.2:
>>>>>iommu_group_create_direct_mappings: iterating through mappings
>>>>>[ 36.692757] pci 0000:01:00.2:
>>>>>iommu_group_create_direct_mappings: calling apply_resv_region
>>>>>[ 36.695526] pci 0000:01:00.2: e_direct_mappings: entry type
>>>>>is direct
>>>>>[ 37.198053] iommu: iommu_map: ops->map failed iova
>>>>>0xbddde000 pa 0x00000000bddde000 pgsize 0x1000
>>>>>[ 37.201357] pci 0000:01:00.2:
>>>>>iommu_group_create_direct_mappings: iommu_map failed
>>>>>[ 37.203973] pci 0000:01:00.2:
>>>>>iommu_group_create_direct_mappings: leaving func
>>>>>[ 37.206385] pci 0000:01:00.2: iommu_group_add_device:
>>>>>calling __iommu_attach_device
>>>>>[ 37.208950] pci 0000:01:00.2: Adding to iommu group 25
>>>>>[ 37.210660] pci 0000:01:00.2: DMAR: domain->type is dma
>>>>>
>>>>
>>>>It bails at the dmar_domain->flags & DOMAIN_FLAG_LOSE_CHILDREN check
>>>>at the beginning of intel_iommu_map. I will verify, but it looks like
>>>>that is getting set when intel_iommu_add_device is called for 01:00.1.
>>>>request_default_domain_for_dev for 01:00.1 will return -EBUSY because
>>>>iommu_group_device_count(group) != 1.
>>>>
>>>
>>>Also I see 01:00.0 and others that are the first in a group
>>>exiting iommu_group_create_direct_mappings
>>>at the (!domain || domain->type != IOMMU_DOMAIN_DMA) check. In
>>>request_default_domain_for_dev default_domain
>>>doesn't getting set until after that call. Should the
>>>iommu_group_create_direct_mappings call be moved below
>>>where group->default_domain gets set?
>>>
>>
>>Doing this the system boots, and I don't get any dmar pte read
>>errors. I still see the map failing because
>>of the DOMAIN_FLAG_LOSE_CHILDREN in those cases mentioned above, but
>>it no longer is spitting out tons of
>>dmar pte read errors.
>
>You can post a patch if you think this is worth of.
>
>Best regards,
>baolu
>
I will send a patch tomorrow. In the case where you have
default passthrough enabled, if the default domain type
for the first device in a group is dma the call will fail, because
iommu_group_create_direct_mappings uses group->default_domain and
that will have an identity type until group->default_domain gets
set right after the iommu_group_create_direct_mappings call.
Regards,
Jerry
>>
>>>>>Also fails for 01:00.4:
>>>>>
>>>>>[ 37.212448] pci 0000:01:00.4: iommu_group_add_device:
>>>>>calling iommu_group_create_direct_mappings
>>>>>[ 37.215382] pci 0000:01:00.4:
>>>>>iommu_group_create_direct_mappings: iterating through mappings
>>>>>[ 37.218170] pci 0000:01:00.4:
>>>>>iommu_group_create_direct_mappings: calling apply_resv_region
>>>>>[ 37.220933] pci 0000:01:00.4:
>>>>>iommu_group_create_direct_mappings: entry type is
>>>>>direct-relaxable
>>>>>[ 37.223932] iommu: iommu_map: ops->map failed iova
>>>>>0xbddde000 pa 0x00000000bddde000 pgsize 0x1000
>>>>>[ 37.226857] pci 0000:01:00.4:
>>>>>iommu_group_create_direct_mappings: iommu_map failed
>>>>>[ 37.229300] pci 0000:01:00.4:
>>>>>iommu_group_create_direct_mappings: leaving func
>>>>>[ 37.231648] pci 0000:01:00.4: iommu_group_add_device:
>>>>>calling __iommu_attach_device
>>>>>[ 37.234194] pci 0000:01:00.4: Adding to iommu group 25
>>>>>[ 37.236192] pci 0000:01:00.4: DMAR: domain->type is dma
>>>>>[ 37.237958] pci 0000:01:00.4: DMAR: device default domain
>>>>>type is identity. requesting identity domain
>>>>>[ 37.241061] pci 0000:01:00.4: don't change mappings of
>>>>>existing d37.489870] pci 0000:01:00.4: DMAR: Device uses a
>>>>>private identity domain.
>>>>>
>>>>>There is an RMRR for 0xbddde000-0xddddefff:
>>>>>
>>>>>[63Ah 1594 2] Subtable Type : 0001 [Reserved
>>>>>Memory Region]
>>>>>[63Ch 1596 2] Length : 0036
>>>>>
>>>>>[63Eh 1598 2] Reserved : 0000
>>>>>[640h 1600 2] PCI Segment Number : 0000
>>>>>[642h 1602 8] Base Address : 00000000BDDDE000
>>>>>[64Ah 1610 8] End Address (limit) : 00000000BDDDEFFF
>>>>>
>>>>>[652h 1618 1] Device Scope Type : 01 [PCI Endpoint Device]
>>>>>[653h 1619 1] Entry Length : 0A
>>>>>[654h 1620 2] Reserved : 0000
>>>>>[656h 1622 1] Enumeration ID : 00
>>>>>[657h 1623 1] PCI Bus Number : 00
>>>>>
>>>>>[658h 1624 2] PCI Path : 1C,07
>>>>>
>>>>>[65Ah 1626 2] PCI Path : 00,00
>>>>>
>>>>>
>>>>>[65Ch 1628 1] Device Scope Type : 01 [PCI Endpoint Device]
>>>>>[65Dh 1629 1] Entry Length : 0A
>>>>>[65Eh 1630 2] Reserved : 0000
>>>>>[660h 1632 1] Enumeration ID : 00
>>>>>[661h 1633 1] PCI Bus Number : 00
>>>>>
>>>>>[662h 1634 2] PCI Path : 1C,07
>>>>>
>>>>>[664h 1636 2] PCI Path : 00,02
>>>>>
>>>>>
>>>>>[666h 1638 1] Device Scope Type : 01 [PCI Endpoint Device]
>>>>>[667h 1639 1] Entry Length : 0A
>>>>>[668h 1640 2] Reserved : 0000
>>>>>[66Ah 1642 1] Enumeration ID : 00
>>>>>[66Bh 1643 1] PCI Bus Number : 00
>>>>>
>>>>>[66Ch 1644 2] PCI Path : 1C,07
>>>>>
>>>>>[66Eh 1646 2] PCI Path : 00,04
>>>>>
>>
>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: dmar pte read access not set error messages on hp dl388 gen8 systems
2019-12-10 5:43 ` Lu Baolu
@ 2019-12-10 22:12 ` Jerry Snitselaar
0 siblings, 0 replies; 30+ messages in thread
From: Jerry Snitselaar @ 2019-12-10 22:12 UTC (permalink / raw)
To: Lu Baolu; +Cc: iommu
On Tue Dec 10 19, Lu Baolu wrote:
>Hi,
>
>On 12/10/19 1:18 PM, Jerry Snitselaar wrote:
>>On Mon Dec 09 19, Jerry Snitselaar wrote:
>>[snip]
>>>
>>>A call to iommu_map is failing.
>>>
>>>[ 36.686881] pci 0000:01:00.2: iommu_group_add_device: calling
>>>iommu_group_create_direct_mappings
>>>[ 36.689843] pci 0000:01:00.2:
>>>iommu_group_create_direct_mappings: iterating through mappings
>>>[ 36.692757] pci 0000:01:00.2:
>>>iommu_group_create_direct_mappings: calling apply_resv_region
>>>[ 36.695526] pci 0000:01:00.2: e_direct_mappings: entry type is direct
>>>[ 37.198053] iommu: iommu_map: ops->map failed iova 0xbddde000
>>>pa 0x00000000bddde000 pgsize 0x1000
>>>[ 37.201357] pci 0000:01:00.2:
>>>iommu_group_create_direct_mappings: iommu_map failed
>>>[ 37.203973] pci 0000:01:00.2:
>>>iommu_group_create_direct_mappings: leaving func
>>>[ 37.206385] pci 0000:01:00.2: iommu_group_add_device: calling
>>>__iommu_attach_device
>>>[ 37.208950] pci 0000:01:00.2: Adding to iommu group 25
>>>[ 37.210660] pci 0000:01:00.2: DMAR: domain->type is dma
>>>
>>
>>It bails at the dmar_domain->flags & DOMAIN_FLAG_LOSE_CHILDREN check
>>at the beginning of intel_iommu_map. I will verify, but it looks like
>>that is getting set when intel_iommu_add_device is called for 01:00.1.
>>request_default_domain_for_dev for 01:00.1 will return -EBUSY because
>>iommu_group_device_count(group) != 1.
>
>Okay, I will send you a fix patch later. Thanks!
>
>Best regards,
>baolu
>
One issue I see is:
[ 38.869182] uhci_hcd 0000:01:00.4: UHCI Host Controller
[ 39.371173] uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3
[ 39.373708] uhci_hcd 0000:01:00.4: detected 8 ports
[ 39.375333] uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
[ 39.377820] uhci_hcd 0000:01:00.4: irq 16, io base 0x00003c00
[ 39.379921] uhci_hcd 0000:01:00.4: DMAR: 32bit DMA uses non-identity mapping
[ 39.382269] uhci_hcd 0000:01:00.4: unable to allocate consistent memory for frame list
[ 39.384920] uhci_hcd 0000:01:00.4: startup error -16
[ 39.386619] uhci_hcd 0000:01:00.4: USB bus 3 deregistered
[ 39.388640] uhci_hcd 0000:01:00.4: init 0000:01:00.4 fail, -16
[ 39.390616] uhci_hcd: probe of 0000:01:00.4 failed with error -16
I'm not sure if this is related to the flag and what is allowed now
by the api. I need to go look at the code to see what it is
doing. I'll try debugging it tonight.
Regards,
Jerry
>>
>>>Also fails for 01:00.4:
>>>
>>>[ 37.212448] pci 0000:01:00.4: iommu_group_add_device: calling
>>>iommu_group_create_direct_mappings
>>>[ 37.215382] pci 0000:01:00.4:
>>>iommu_group_create_direct_mappings: iterating through mappings
>>>[ 37.218170] pci 0000:01:00.4:
>>>iommu_group_create_direct_mappings: calling apply_resv_region
>>>[ 37.220933] pci 0000:01:00.4:
>>>iommu_group_create_direct_mappings: entry type is direct-relaxable
>>>[ 37.223932] iommu: iommu_map: ops->map failed iova 0xbddde000
>>>pa 0x00000000bddde000 pgsize 0x1000
>>>[ 37.226857] pci 0000:01:00.4:
>>>iommu_group_create_direct_mappings: iommu_map failed
>>>[ 37.229300] pci 0000:01:00.4:
>>>iommu_group_create_direct_mappings: leaving func
>>>[ 37.231648] pci 0000:01:00.4: iommu_group_add_device: calling
>>>__iommu_attach_device
>>>[ 37.234194] pci 0000:01:00.4: Adding to iommu group 25
>>>[ 37.236192] pci 0000:01:00.4: DMAR: domain->type is dma
>>>[ 37.237958] pci 0000:01:00.4: DMAR: device default domain type
>>>is identity. requesting identity domain
>>>[ 37.241061] pci 0000:01:00.4: don't change mappings of existing
>>>d37.489870] pci 0000:01:00.4: DMAR: Device uses a private identity
>>>domain.
>>>
>>>There is an RMRR for 0xbddde000-0xddddefff:
>>>
>>>[63Ah 1594 2] Subtable Type : 0001 [Reserved
>>>Memory Region]
>>>[63Ch 1596 2] Length : 0036
>>>
>>>[63Eh 1598 2] Reserved : 0000
>>>[640h 1600 2] PCI Segment Number : 0000
>>>[642h 1602 8] Base Address : 00000000BDDDE000
>>>[64Ah 1610 8] End Address (limit) : 00000000BDDDEFFF
>>>
>>>[652h 1618 1] Device Scope Type : 01 [PCI Endpoint Device]
>>>[653h 1619 1] Entry Length : 0A
>>>[654h 1620 2] Reserved : 0000
>>>[656h 1622 1] Enumeration ID : 00
>>>[657h 1623 1] PCI Bus Number : 00
>>>
>>>[658h 1624 2] PCI Path : 1C,07
>>>
>>>[65Ah 1626 2] PCI Path : 00,00
>>>
>>>
>>>[65Ch 1628 1] Device Scope Type : 01 [PCI Endpoint Device]
>>>[65Dh 1629 1] Entry Length : 0A
>>>[65Eh 1630 2] Reserved : 0000
>>>[660h 1632 1] Enumeration ID : 00
>>>[661h 1633 1] PCI Bus Number : 00
>>>
>>>[662h 1634 2] PCI Path : 1C,07
>>>
>>>[664h 1636 2] PCI Path : 00,02
>>>
>>>
>>>[666h 1638 1] Device Scope Type : 01 [PCI Endpoint Device]
>>>[667h 1639 1] Entry Length : 0A
>>>[668h 1640 2] Reserved : 0000
>>>[66Ah 1642 1] Enumeration ID : 00
>>>[66Bh 1643 1] PCI Bus Number : 00
>>>
>>>[66Ch 1644 2] PCI Path : 1C,07
>>>
>>>[66Eh 1646 2] PCI Path : 00,04
>>>
>>
>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 30+ messages in thread
end of thread, other threads:[~2019-12-10 22:12 UTC | newest]
Thread overview: 30+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-02 6:34 dmar pte read access not set error messages on hp dl388 gen8 systems Jerry Snitselaar
2019-12-02 6:41 ` Lu Baolu
2019-12-02 7:14 ` Jerry Snitselaar
2019-12-02 16:13 ` Jerry Snitselaar
2019-12-03 1:59 ` Lu Baolu
2019-12-03 9:56 ` Jerry Snitselaar
2019-12-04 0:17 ` Lu Baolu
2019-12-04 20:53 ` Jerry Snitselaar
2019-12-05 1:39 ` Lu Baolu
2019-12-05 2:25 ` Jerry Snitselaar
2019-12-05 2:44 ` Lu Baolu
2019-12-05 2:53 ` Jerry Snitselaar
2019-12-06 1:52 ` Lu Baolu
2019-12-06 7:24 ` Jerry Snitselaar
2019-12-07 1:53 ` Lu Baolu
2019-12-07 2:29 ` Jerry Snitselaar
2019-12-07 2:41 ` Jerry Snitselaar
2019-12-08 6:26 ` Lu Baolu
2019-12-10 0:52 ` Jerry Snitselaar
2019-12-10 1:29 ` Lu Baolu
2019-12-10 3:47 ` Jerry Snitselaar
2019-12-10 5:03 ` Lu Baolu
2019-12-10 5:18 ` Jerry Snitselaar
2019-12-10 5:43 ` Lu Baolu
2019-12-10 22:12 ` Jerry Snitselaar
2019-12-10 5:43 ` Jerry Snitselaar
2019-12-10 6:16 ` Jerry Snitselaar
2019-12-10 6:26 ` Lu Baolu
2019-12-10 7:44 ` Jerry Snitselaar
2019-12-08 6:04 ` Lu Baolu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.