On 6/7/22 3:12 PM, Alexander Kanavin wrote:
Can you drop insane_skip for a moment and show what errors then happen?


Yes, thank you.

ERROR: xxx-single-group-0.1-r0 do_package_qa: QA Issue: /opt/binstuf/linux-allwinneryocto-armle-opengles_2.0-obj/lib/libfbxsdk.so contained in package xxx-single-group requires libpthread.so.0(GLIBC_2.2), but no providers found in RDEPENDS:xxx-single-group? [file-rdeps]

There are many more of these errors.


Objdump on libfbxsdk.so:

Version References:
  required from libgcc_s.so.1:
    0x0b792650 0x00 12 GCC_3.0
  required from libpthread.so.0:
    0x0d696912 0x00 10 GLIBC_2.2
    0x09691972 0x00 07 GLIBC_2.3.2
    0x0d696911 0x00 05 GLIBC_2.1
    0x0d696910 0x00 03 GLIBC_2.0
  required from libc.so.6:
    0x0d696912 0x00 11 GLIBC_2.2
    0x0d696917 0x00 09 GLIBC_2.7
    0x0d696911 0x00 08 GLIBC_2.1
    0x0d696913 0x00 06 GLIBC_2.3
    0x09691f73 0x00 04 GLIBC_2.1.3
    0x0d696910 0x00 02 GLIBC_2.0

Objdump on libpthread.so.0:

Version definitions:
1 0x01 0x0e2f2c50 libpthread.so.0
2 0x00 0x06969197 GLIBC_2.17
3 0x00 0x06969198 GLIBC_2.18
        GLIBC_2.17
4 0x00 0x06969188 GLIBC_2.28
        GLIBC_2.18
5 0x00 0x069691b0 GLIBC_2.30
        GLIBC_2.28
6 0x00 0x069691b1 GLIBC_2.31
        GLIBC_2.30


The versions don't match hence dnf throws an error. I guess I can defer the error with INSANE_SKIP += "file-rdeps" but then it comes up again when installing.



Alex

On Tue 7. Jun 2022 at 22.57, Rudolf J Streif <rudolf.streif@ibeeto.com> wrote:

On 6/7/22 12:44 PM, Alexander Kanavin wrote:
> Can you show the recipe that you wrote for the blob?

Not exactly as is because of customer names, but below is a sanitized
version:


SUMMARY = "Binary Stuff"

LICENSE = "CLOSED"

SRC_URI = "file://binary_installer.tgz \
           "

do_install() {

     install -d -m 0755 ${D}/opt/binstuff

     tar cf - -C ${WORKDIR}/opt/binstuff . | tar xf - -C ${D}/binstuff

}

FILES:${PN} = "/opt/binstuff"


RDEPENDS:${PN} += "libsystemd libudev libgpiod wayland"
INSANE_SKIP:${PN} += "ldflags file-rdeps arch staticdev"

The recipe itself builds just fine and creates the RPM package. However,
the some of the binaries inside the package have been built against
shared libs of older versions. The libs are there of course but with the
wrong version. Adding file-rdeps to INSANE_SKIP addresses this at build
time. But when installing the package in the rootfs dnf does a
dependency check which then fails.

I don't know if there is an elegant way of overriding dnf to force
installation of the package.


>
> Alex
>
> On Tue, 7 Jun 2022 at 20:59, Rudolf J Streif <rudolf.streif@ibeeto.com> wrote:
>> I have been handed a binary package that I am integrating into a Yocto
>> build.
>>
>> When dnf runs it complains about missing dependencies. These are
>> standard libraries of course but the culprit is the incompatible
>> version. The software runs fine when I install it on the target using
>> the script/tar installation it comes with. Needless to say that YP
>> packaging QA complains about this already when assembling the package.
>> However, there I can silence the complaints with INSANE_SKIP.
>>
>> Unfortunately I have not found a method doing the same when the package
>> is installed by the image class.
>>
>> Is there an elegant way around it?
>>
>>
>> Error:
>>    Problem: conflicting requests
>>     - nothing provides libdl.so.2 needed by
>> xxx-single-group-0.1-r0.cortexa53_crypto
>>     - nothing provides libdl.so.2(GLIBC_2.0) needed by
>> xxx-single-group-0.1-r0.cortexa53_crypto
>>     - nothing provides libdl.so.2(GLIBC_2.1) needed by
>> xxx-single-group-0.1-r0.cortexa53_crypto
>>     - nothing provides libgcc_s.so.1 needed by
>> xxx-single-group-0.1-r0.cortexa53_crypto
>>     - nothing provides libgcc_s.so.1(GCC_3.0) needed by
>> xxx-single-group-0.1-r0.cortexa53_crypto
>>     - nothing provides libm.so.6 needed by
>> xxx-single-group-0.1-r0.cortexa53_crypto
>>     - nothing provides libm.so.6(GLIBC_2.0) needed by
>> xxx-single-group-0.1-r0.cortexa53_crypto
>>     - nothing provides libm.so.6(GLIBC_2.1) needed by
>> xxx-single-group-0.1-r0.cortexa53_crypto
>>     - nothing provides libpthread.so.0 needed by
>> xxx-single-group-0.1-r0.cortexa53_crypto
>>     - nothing provides libpthread.so.0(GLIBC_2.0) needed by
>> xxx-single-group-0.1-r0.cortexa53_crypto
>>     - nothing provides libpthread.so.0(GLIBC_2.1) needed by
>> xxx-single-group-0.1-r0.cortexa53_crypto
>>     - nothing provides libpthread.so.0(GLIBC_2.2) needed by
>> xxx-single-group-0.1-r0.cortexa53_crypto
>>     - nothing provides libpthread.so.0(GLIBC_2.3.2) needed by
>> xxx-single-group-0.1-r0.cortexa53_crypto
>>     - nothing provides librt.so.1 needed by
>> xxx-single-group-0.1-r0.cortexa53_crypto
>>     - nothing provides librt.so.1(GLIBC_2.2) needed by
>> xxx-single-group-0.1-r0.cortexa53_crypto
>> (try to add '--skip-broken' to skip uninstallable packages)
>>
>>
>> --
>> Rudolf J Streif
>> CEO/CTO ibeeto
>> +1.855.442.3386 x700
>>
>>
>> -=-=-=-=-=-=-=-=-=-=-=-
>> Links: You receive all messages sent to this group.
>> View/Reply Online (#57296): https://lists.yoctoproject.org/g/yocto/message/57296
>> Mute This Topic: https://lists.yoctoproject.org/mt/91607892/1686489
>> Group Owner: yocto+owner@lists.yoctoproject.org
>> Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [alex.kanavin@gmail.com]
>> -=-=-=-=-=-=-=-=-=-=-=-
>>
--
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3386 x700

-- 
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3386 x700