[PATCH v5 0/6] Raspberry PI 4 V3D enablement

[PATCH v5 0/6] Raspberry PI 4 V3D enablement

[Peter Robinson]

This is a follow up from my v4 patchset. The power management pieces have
been split out to a separate independent set of patches by Stefan [1]. This
version 5 of the DRM patches are independent and given the V3D driver has
been upstream for some time the two patches to enable it in defconfigs can 
be taken at anytime independent of the enablement for the Raspberry Pi 4.

I've tested this using mesa 22.0.x and Wayland/Gnome on Fedora 36, it's 
more or less stable with basic testing.

Changes since v4:
- Fixes for device tree and bindings
- Split out the power management changes into an independent set
- Rebase to 5.18
- Individual changes in patches

[1] https://www.spinics.net/lists/arm-kernel/msg980342.html

Nicolas Saenz Julienne (1):
  arm64: config: Enable DRM_V3D

Peter Robinson (5):
  dt-bindings: gpu: v3d: Add BCM2711's compatible
  drm/v3d: Get rid of pm code
  drm/v3d: Add support for bcm2711
  ARM: dts: bcm2711: Enable V3D
  ARM: configs: Enable DRM_V3D

 .../devicetree/bindings/gpu/brcm,bcm-v3d.yaml  |  1 +
 arch/arm/boot/dts/bcm2711-rpi.dtsi             |  4 ++++
 arch/arm/boot/dts/bcm2711.dtsi                 | 11 +++++++++++
 arch/arm/configs/bcm2835_defconfig             |  1 +
 arch/arm/configs/multi_v7_defconfig            |  1 +
 arch/arm64/configs/defconfig                   |  1 +
 drivers/gpu/drm/v3d/Kconfig                    |  2 +-
 drivers/gpu/drm/v3d/v3d_debugfs.c              | 18 +-----------------
 drivers/gpu/drm/v3d/v3d_drv.c                  | 12 +-----------
 drivers/gpu/drm/v3d/v3d_gem.c                  | 12 +-----------
 10 files changed, 23 insertions(+), 40 deletions(-)

-- 
2.36.1

[PATCH v5 0/6] Raspberry PI 4 V3D enablement

[Peter Robinson]

This is a follow up from my v4 patchset. The power management pieces have
been split out to a separate independent set of patches by Stefan [1]. This
version 5 of the DRM patches are independent and given the V3D driver has
been upstream for some time the two patches to enable it in defconfigs can 
be taken at anytime independent of the enablement for the Raspberry Pi 4.

I've tested this using mesa 22.0.x and Wayland/Gnome on Fedora 36, it's 
more or less stable with basic testing.

Changes since v4:
- Fixes for device tree and bindings
- Split out the power management changes into an independent set
- Rebase to 5.18
- Individual changes in patches

[1] https://www.spinics.net/lists/arm-kernel/msg980342.html

Nicolas Saenz Julienne (1):
  arm64: config: Enable DRM_V3D

Peter Robinson (5):
  dt-bindings: gpu: v3d: Add BCM2711's compatible
  drm/v3d: Get rid of pm code
  drm/v3d: Add support for bcm2711
  ARM: dts: bcm2711: Enable V3D
  ARM: configs: Enable DRM_V3D

 .../devicetree/bindings/gpu/brcm,bcm-v3d.yaml  |  1 +
 arch/arm/boot/dts/bcm2711-rpi.dtsi             |  4 ++++
 arch/arm/boot/dts/bcm2711.dtsi                 | 11 +++++++++++
 arch/arm/configs/bcm2835_defconfig             |  1 +
 arch/arm/configs/multi_v7_defconfig            |  1 +
 arch/arm64/configs/defconfig                   |  1 +
 drivers/gpu/drm/v3d/Kconfig                    |  2 +-
 drivers/gpu/drm/v3d/v3d_debugfs.c              | 18 +-----------------
 drivers/gpu/drm/v3d/v3d_drv.c                  | 12 +-----------
 drivers/gpu/drm/v3d/v3d_gem.c                  | 12 +-----------
 10 files changed, 23 insertions(+), 40 deletions(-)

-- 
2.36.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 1/6] dt-bindings: gpu: v3d: Add BCM2711's compatible

[Peter Robinson]

BCM2711, Raspberry Pi 4's SoC, contains a V3D core. So add its specific
compatible to the bindings.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
Changes since v5:
- Change compatible to align downstream and othee HW, reorder to suit

 Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
index e6485f7b046f..217c42874f41 100644
--- a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
+++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
@@ -16,6 +16,7 @@ properties:
 
   compatible:
     enum:
+      - brcm,2711-v3d
       - brcm,7268-v3d
       - brcm,7278-v3d
 
-- 
2.36.1

[PATCH v5 1/6] dt-bindings: gpu: v3d: Add BCM2711's compatible

[Peter Robinson]

BCM2711, Raspberry Pi 4's SoC, contains a V3D core. So add its specific
compatible to the bindings.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
Changes since v5:
- Change compatible to align downstream and othee HW, reorder to suit

 Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
index e6485f7b046f..217c42874f41 100644
--- a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
+++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
@@ -16,6 +16,7 @@ properties:
 
   compatible:
     enum:
+      - brcm,2711-v3d
       - brcm,7268-v3d
       - brcm,7278-v3d
 
-- 
2.36.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 2/6] drm/v3d: Get rid of pm code

[Peter Robinson]

Runtime PM doesn't seem to work correctly on this driver. On top of
that, commit 8b6864e3e138 ("drm/v3d/v3d_drv: Remove unused static
variable 'v3d_v3d_pm_ops'") hints that it most likely never did as the
driver's PM ops were not hooked-up.

So, in order to support regular operation with V3D on BCM2711 (Raspberry
Pi 4), get rid of the PM code. PM will be reinstated once we figure out
the underlying issues.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
Changes since v5:
- Rebase

Changes since v3:
- Minor updates for rebase

 drivers/gpu/drm/v3d/v3d_debugfs.c | 18 +-----------------
 drivers/gpu/drm/v3d/v3d_drv.c     | 11 -----------
 drivers/gpu/drm/v3d/v3d_gem.c     | 12 +-----------
 3 files changed, 2 insertions(+), 39 deletions(-)

diff --git a/drivers/gpu/drm/v3d/v3d_debugfs.c b/drivers/gpu/drm/v3d/v3d_debugfs.c
index 29fd13109e43..efbde124c296 100644
--- a/drivers/gpu/drm/v3d/v3d_debugfs.c
+++ b/drivers/gpu/drm/v3d/v3d_debugfs.c
@@ -4,7 +4,6 @@
 #include <linux/circ_buf.h>
 #include <linux/ctype.h>
 #include <linux/debugfs.h>
-#include <linux/pm_runtime.h>
 #include <linux/seq_file.h>
 #include <linux/string_helpers.h>
 
@@ -131,11 +130,7 @@ static int v3d_v3d_debugfs_ident(struct seq_file *m, void *unused)
 	struct drm_device *dev = node->minor->dev;
 	struct v3d_dev *v3d = to_v3d_dev(dev);
 	u32 ident0, ident1, ident2, ident3, cores;
-	int ret, core;
-
-	ret = pm_runtime_get_sync(v3d->drm.dev);
-	if (ret < 0)
-		return ret;
+	int core;
 
 	ident0 = V3D_READ(V3D_HUB_IDENT0);
 	ident1 = V3D_READ(V3D_HUB_IDENT1);
@@ -188,9 +183,6 @@ static int v3d_v3d_debugfs_ident(struct seq_file *m, void *unused)
 			   (misccfg & V3D_MISCCFG_OVRTMUOUT) != 0);
 	}
 
-	pm_runtime_mark_last_busy(v3d->drm.dev);
-	pm_runtime_put_autosuspend(v3d->drm.dev);
-
 	return 0;
 }
 
@@ -218,11 +210,6 @@ static int v3d_measure_clock(struct seq_file *m, void *unused)
 	uint32_t cycles;
 	int core = 0;
 	int measure_ms = 1000;
-	int ret;
-
-	ret = pm_runtime_get_sync(v3d->drm.dev);
-	if (ret < 0)
-		return ret;
 
 	if (v3d->ver >= 40) {
 		V3D_CORE_WRITE(core, V3D_V4_PCTR_0_SRC_0_3,
@@ -246,9 +233,6 @@ static int v3d_measure_clock(struct seq_file *m, void *unused)
 		   cycles / (measure_ms * 1000),
 		   (cycles / (measure_ms * 100)) % 10);
 
-	pm_runtime_mark_last_busy(v3d->drm.dev);
-	pm_runtime_put_autosuspend(v3d->drm.dev);
-
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/v3d/v3d_drv.c b/drivers/gpu/drm/v3d/v3d_drv.c
index 1afcd54fbbd5..56d5f831e48b 100644
--- a/drivers/gpu/drm/v3d/v3d_drv.c
+++ b/drivers/gpu/drm/v3d/v3d_drv.c
@@ -19,7 +19,6 @@
 #include <linux/module.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
 #include <linux/reset.h>
 
 #include <drm/drm_drv.h>
@@ -43,7 +42,6 @@ static int v3d_get_param_ioctl(struct drm_device *dev, void *data,
 {
 	struct v3d_dev *v3d = to_v3d_dev(dev);
 	struct drm_v3d_get_param *args = data;
-	int ret;
 	static const u32 reg_map[] = {
 		[DRM_V3D_PARAM_V3D_UIFCFG] = V3D_HUB_UIFCFG,
 		[DRM_V3D_PARAM_V3D_HUB_IDENT1] = V3D_HUB_IDENT1,
@@ -69,17 +67,12 @@ static int v3d_get_param_ioctl(struct drm_device *dev, void *data,
 		if (args->value != 0)
 			return -EINVAL;
 
-		ret = pm_runtime_get_sync(v3d->drm.dev);
-		if (ret < 0)
-			return ret;
 		if (args->param >= DRM_V3D_PARAM_V3D_CORE0_IDENT0 &&
 		    args->param <= DRM_V3D_PARAM_V3D_CORE0_IDENT2) {
 			args->value = V3D_CORE_READ(0, offset);
 		} else {
 			args->value = V3D_READ(offset);
 		}
-		pm_runtime_mark_last_busy(v3d->drm.dev);
-		pm_runtime_put_autosuspend(v3d->drm.dev);
 		return 0;
 	}
 
@@ -280,10 +273,6 @@ static int v3d_platform_drm_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	pm_runtime_use_autosuspend(dev);
-	pm_runtime_set_autosuspend_delay(dev, 50);
-	pm_runtime_enable(dev);
-
 	ret = v3d_gem_init(drm);
 	if (ret)
 		goto dma_free;
diff --git a/drivers/gpu/drm/v3d/v3d_gem.c b/drivers/gpu/drm/v3d/v3d_gem.c
index 92bc0faee84f..7026214a09f0 100644
--- a/drivers/gpu/drm/v3d/v3d_gem.c
+++ b/drivers/gpu/drm/v3d/v3d_gem.c
@@ -6,7 +6,6 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
 #include <linux/reset.h>
 #include <linux/sched/signal.h>
 #include <linux/uaccess.h>
@@ -367,9 +366,6 @@ v3d_job_free(struct kref *ref)
 	dma_fence_put(job->irq_fence);
 	dma_fence_put(job->done_fence);
 
-	pm_runtime_mark_last_busy(job->v3d->drm.dev);
-	pm_runtime_put_autosuspend(job->v3d->drm.dev);
-
 	if (job->perfmon)
 		v3d_perfmon_put(job->perfmon);
 
@@ -471,14 +467,10 @@ v3d_job_init(struct v3d_dev *v3d, struct drm_file *file_priv,
 	job->v3d = v3d;
 	job->free = free;
 
-	ret = pm_runtime_get_sync(v3d->drm.dev);
-	if (ret < 0)
-		goto fail;
-
 	ret = drm_sched_job_init(&job->base, &v3d_priv->sched_entity[queue],
 				 v3d_priv);
 	if (ret)
-		goto fail_job;
+		goto fail;
 
 	if (has_multisync) {
 		if (se->in_sync_count && se->wait_stage == queue) {
@@ -509,8 +501,6 @@ v3d_job_init(struct v3d_dev *v3d, struct drm_file *file_priv,
 
 fail_deps:
 	drm_sched_job_cleanup(&job->base);
-fail_job:
-	pm_runtime_put_autosuspend(v3d->drm.dev);
 fail:
 	kfree(*container);
 	*container = NULL;
-- 
2.36.1

[PATCH v5 2/6] drm/v3d: Get rid of pm code

[Peter Robinson]

Runtime PM doesn't seem to work correctly on this driver. On top of
that, commit 8b6864e3e138 ("drm/v3d/v3d_drv: Remove unused static
variable 'v3d_v3d_pm_ops'") hints that it most likely never did as the
driver's PM ops were not hooked-up.

So, in order to support regular operation with V3D on BCM2711 (Raspberry
Pi 4), get rid of the PM code. PM will be reinstated once we figure out
the underlying issues.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
Changes since v5:
- Rebase

Changes since v3:
- Minor updates for rebase

 drivers/gpu/drm/v3d/v3d_debugfs.c | 18 +-----------------
 drivers/gpu/drm/v3d/v3d_drv.c     | 11 -----------
 drivers/gpu/drm/v3d/v3d_gem.c     | 12 +-----------
 3 files changed, 2 insertions(+), 39 deletions(-)

diff --git a/drivers/gpu/drm/v3d/v3d_debugfs.c b/drivers/gpu/drm/v3d/v3d_debugfs.c
index 29fd13109e43..efbde124c296 100644
--- a/drivers/gpu/drm/v3d/v3d_debugfs.c
+++ b/drivers/gpu/drm/v3d/v3d_debugfs.c
@@ -4,7 +4,6 @@
 #include <linux/circ_buf.h>
 #include <linux/ctype.h>
 #include <linux/debugfs.h>
-#include <linux/pm_runtime.h>
 #include <linux/seq_file.h>
 #include <linux/string_helpers.h>
 
@@ -131,11 +130,7 @@ static int v3d_v3d_debugfs_ident(struct seq_file *m, void *unused)
 	struct drm_device *dev = node->minor->dev;
 	struct v3d_dev *v3d = to_v3d_dev(dev);
 	u32 ident0, ident1, ident2, ident3, cores;
-	int ret, core;
-
-	ret = pm_runtime_get_sync(v3d->drm.dev);
-	if (ret < 0)
-		return ret;
+	int core;
 
 	ident0 = V3D_READ(V3D_HUB_IDENT0);
 	ident1 = V3D_READ(V3D_HUB_IDENT1);
@@ -188,9 +183,6 @@ static int v3d_v3d_debugfs_ident(struct seq_file *m, void *unused)
 			   (misccfg & V3D_MISCCFG_OVRTMUOUT) != 0);
 	}
 
-	pm_runtime_mark_last_busy(v3d->drm.dev);
-	pm_runtime_put_autosuspend(v3d->drm.dev);
-
 	return 0;
 }
 
@@ -218,11 +210,6 @@ static int v3d_measure_clock(struct seq_file *m, void *unused)
 	uint32_t cycles;
 	int core = 0;
 	int measure_ms = 1000;
-	int ret;
-
-	ret = pm_runtime_get_sync(v3d->drm.dev);
-	if (ret < 0)
-		return ret;
 
 	if (v3d->ver >= 40) {
 		V3D_CORE_WRITE(core, V3D_V4_PCTR_0_SRC_0_3,
@@ -246,9 +233,6 @@ static int v3d_measure_clock(struct seq_file *m, void *unused)
 		   cycles / (measure_ms * 1000),
 		   (cycles / (measure_ms * 100)) % 10);
 
-	pm_runtime_mark_last_busy(v3d->drm.dev);
-	pm_runtime_put_autosuspend(v3d->drm.dev);
-
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/v3d/v3d_drv.c b/drivers/gpu/drm/v3d/v3d_drv.c
index 1afcd54fbbd5..56d5f831e48b 100644
--- a/drivers/gpu/drm/v3d/v3d_drv.c
+++ b/drivers/gpu/drm/v3d/v3d_drv.c
@@ -19,7 +19,6 @@
 #include <linux/module.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
 #include <linux/reset.h>
 
 #include <drm/drm_drv.h>
@@ -43,7 +42,6 @@ static int v3d_get_param_ioctl(struct drm_device *dev, void *data,
 {
 	struct v3d_dev *v3d = to_v3d_dev(dev);
 	struct drm_v3d_get_param *args = data;
-	int ret;
 	static const u32 reg_map[] = {
 		[DRM_V3D_PARAM_V3D_UIFCFG] = V3D_HUB_UIFCFG,
 		[DRM_V3D_PARAM_V3D_HUB_IDENT1] = V3D_HUB_IDENT1,
@@ -69,17 +67,12 @@ static int v3d_get_param_ioctl(struct drm_device *dev, void *data,
 		if (args->value != 0)
 			return -EINVAL;
 
-		ret = pm_runtime_get_sync(v3d->drm.dev);
-		if (ret < 0)
-			return ret;
 		if (args->param >= DRM_V3D_PARAM_V3D_CORE0_IDENT0 &&
 		    args->param <= DRM_V3D_PARAM_V3D_CORE0_IDENT2) {
 			args->value = V3D_CORE_READ(0, offset);
 		} else {
 			args->value = V3D_READ(offset);
 		}
-		pm_runtime_mark_last_busy(v3d->drm.dev);
-		pm_runtime_put_autosuspend(v3d->drm.dev);
 		return 0;
 	}
 
@@ -280,10 +273,6 @@ static int v3d_platform_drm_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	pm_runtime_use_autosuspend(dev);
-	pm_runtime_set_autosuspend_delay(dev, 50);
-	pm_runtime_enable(dev);
-
 	ret = v3d_gem_init(drm);
 	if (ret)
 		goto dma_free;
diff --git a/drivers/gpu/drm/v3d/v3d_gem.c b/drivers/gpu/drm/v3d/v3d_gem.c
index 92bc0faee84f..7026214a09f0 100644
--- a/drivers/gpu/drm/v3d/v3d_gem.c
+++ b/drivers/gpu/drm/v3d/v3d_gem.c
@@ -6,7 +6,6 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
 #include <linux/reset.h>
 #include <linux/sched/signal.h>
 #include <linux/uaccess.h>
@@ -367,9 +366,6 @@ v3d_job_free(struct kref *ref)
 	dma_fence_put(job->irq_fence);
 	dma_fence_put(job->done_fence);
 
-	pm_runtime_mark_last_busy(job->v3d->drm.dev);
-	pm_runtime_put_autosuspend(job->v3d->drm.dev);
-
 	if (job->perfmon)
 		v3d_perfmon_put(job->perfmon);
 
@@ -471,14 +467,10 @@ v3d_job_init(struct v3d_dev *v3d, struct drm_file *file_priv,
 	job->v3d = v3d;
 	job->free = free;
 
-	ret = pm_runtime_get_sync(v3d->drm.dev);
-	if (ret < 0)
-		goto fail;
-
 	ret = drm_sched_job_init(&job->base, &v3d_priv->sched_entity[queue],
 				 v3d_priv);
 	if (ret)
-		goto fail_job;
+		goto fail;
 
 	if (has_multisync) {
 		if (se->in_sync_count && se->wait_stage == queue) {
@@ -509,8 +501,6 @@ v3d_job_init(struct v3d_dev *v3d, struct drm_file *file_priv,
 
 fail_deps:
 	drm_sched_job_cleanup(&job->base);
-fail_job:
-	pm_runtime_put_autosuspend(v3d->drm.dev);
 fail:
 	kfree(*container);
 	*container = NULL;
-- 
2.36.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 3/6] drm/v3d: Add support for bcm2711

[Peter Robinson]

Add compatible string and Kconfig options for bcm2711.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
Changes since v5:
- Change compatible to align downstream and othee HW, reorder to suit

 drivers/gpu/drm/v3d/Kconfig   | 2 +-
 drivers/gpu/drm/v3d/v3d_drv.c | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/v3d/Kconfig b/drivers/gpu/drm/v3d/Kconfig
index e973ec487484..01d91c829107 100644
--- a/drivers/gpu/drm/v3d/Kconfig
+++ b/drivers/gpu/drm/v3d/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config DRM_V3D
 	tristate "Broadcom V3D 3.x and newer"
-	depends on ARCH_BCM || ARCH_BRCMSTB || COMPILE_TEST
+	depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST
 	depends on DRM
 	depends on COMMON_CLK
 	depends on MMU
diff --git a/drivers/gpu/drm/v3d/v3d_drv.c b/drivers/gpu/drm/v3d/v3d_drv.c
index 56d5f831e48b..8c7f910daa28 100644
--- a/drivers/gpu/drm/v3d/v3d_drv.c
+++ b/drivers/gpu/drm/v3d/v3d_drv.c
@@ -191,6 +191,7 @@ static const struct drm_driver v3d_drm_driver = {
 };
 
 static const struct of_device_id v3d_of_match[] = {
+	{ .compatible = "brcm,2711-v3d" },
 	{ .compatible = "brcm,7268-v3d" },
 	{ .compatible = "brcm,7278-v3d" },
 	{},
-- 
2.36.1

[PATCH v5 3/6] drm/v3d: Add support for bcm2711

[Peter Robinson]

Add compatible string and Kconfig options for bcm2711.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
Changes since v5:
- Change compatible to align downstream and othee HW, reorder to suit

 drivers/gpu/drm/v3d/Kconfig   | 2 +-
 drivers/gpu/drm/v3d/v3d_drv.c | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/v3d/Kconfig b/drivers/gpu/drm/v3d/Kconfig
index e973ec487484..01d91c829107 100644
--- a/drivers/gpu/drm/v3d/Kconfig
+++ b/drivers/gpu/drm/v3d/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config DRM_V3D
 	tristate "Broadcom V3D 3.x and newer"
-	depends on ARCH_BCM || ARCH_BRCMSTB || COMPILE_TEST
+	depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST
 	depends on DRM
 	depends on COMMON_CLK
 	depends on MMU
diff --git a/drivers/gpu/drm/v3d/v3d_drv.c b/drivers/gpu/drm/v3d/v3d_drv.c
index 56d5f831e48b..8c7f910daa28 100644
--- a/drivers/gpu/drm/v3d/v3d_drv.c
+++ b/drivers/gpu/drm/v3d/v3d_drv.c
@@ -191,6 +191,7 @@ static const struct drm_driver v3d_drm_driver = {
 };
 
 static const struct of_device_id v3d_of_match[] = {
+	{ .compatible = "brcm,2711-v3d" },
 	{ .compatible = "brcm,7268-v3d" },
 	{ .compatible = "brcm,7278-v3d" },
 	{},
-- 
2.36.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 4/6] ARM: dts: bcm2711: Enable V3D

[Peter Robinson]

This adds the entry for V3D for bcm2711 (used in the Raspberry Pi 4)
and the associated firmware clock entry.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
Changes since v5:
- Move the firmware clock to bcm2711-rpi.dtsi

 arch/arm/boot/dts/bcm2711-rpi.dtsi |  4 ++++
 arch/arm/boot/dts/bcm2711.dtsi     | 11 +++++++++++
 2 files changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi
index ca266c5d9f9b..98817a6675b9 100644
--- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi
@@ -69,6 +69,10 @@ blconfig: nvram@0 {
 	};
 };
 
+&v3d {
+	clocks = <&firmware_clocks 5>;
+};
+
 &vchiq {
 	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 };
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 89af57482bc8..177662257b16 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -601,6 +601,17 @@ genet_mdio: mdio@e14 {
 				#size-cells = <0x0>;
 			};
 		};
+
+		v3d: gpu@7ec00000 {
+			compatible = "brcm,bcm2711-v3d";
+			reg = <0x0 0x7ec00000 0x4000>,
+			      <0x0 0x7ec04000 0x4000>;
+			reg-names = "hub", "core0";
+
+			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
+			resets = <&pm BCM2835_RESET_V3D>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };
 
-- 
2.36.1

[PATCH v5 4/6] ARM: dts: bcm2711: Enable V3D

[Peter Robinson]

This adds the entry for V3D for bcm2711 (used in the Raspberry Pi 4)
and the associated firmware clock entry.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
Changes since v5:
- Move the firmware clock to bcm2711-rpi.dtsi

 arch/arm/boot/dts/bcm2711-rpi.dtsi |  4 ++++
 arch/arm/boot/dts/bcm2711.dtsi     | 11 +++++++++++
 2 files changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi
index ca266c5d9f9b..98817a6675b9 100644
--- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi
@@ -69,6 +69,10 @@ blconfig: nvram@0 {
 	};
 };
 
+&v3d {
+	clocks = <&firmware_clocks 5>;
+};
+
 &vchiq {
 	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 };
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 89af57482bc8..177662257b16 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -601,6 +601,17 @@ genet_mdio: mdio@e14 {
 				#size-cells = <0x0>;
 			};
 		};
+
+		v3d: gpu@7ec00000 {
+			compatible = "brcm,bcm2711-v3d";
+			reg = <0x0 0x7ec00000 0x4000>,
+			      <0x0 0x7ec04000 0x4000>;
+			reg-names = "hub", "core0";
+
+			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
+			resets = <&pm BCM2835_RESET_V3D>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };
 
-- 
2.36.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 5/6] ARM: configs: Enable DRM_V3D

[Peter Robinson]

BCM2711, the SoC used on the Raspberry Pi 4 has a different 3D
render GPU IP than its predecessors. Enable it it on multi v7
and bcm2835 configs.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
Changes since v5:
- Added to bcm2835_defconfig

 arch/arm/configs/bcm2835_defconfig  | 1 +
 arch/arm/configs/multi_v7_defconfig | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index a9ed79b7f871..9270512c14ea 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -106,6 +106,7 @@ CONFIG_REGULATOR_GPIO=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_DRM=y
+CONFIG_DRM_V3D=y
 CONFIG_DRM_VC4=y
 CONFIG_FB_SIMPLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index d6a6811f0539..e2db5cdc66b7 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -731,6 +731,7 @@ CONFIG_DRM_IMX_PARALLEL_DISPLAY=m
 CONFIG_DRM_IMX_TVE=m
 CONFIG_DRM_IMX_LDB=m
 CONFIG_DRM_IMX_HDMI=m
+CONFIG_DRM_V3D=m
 CONFIG_DRM_VC4=m
 CONFIG_DRM_ETNAVIV=m
 CONFIG_DRM_MXSFB=m
-- 
2.36.1

[PATCH v5 5/6] ARM: configs: Enable DRM_V3D

[Peter Robinson]

BCM2711, the SoC used on the Raspberry Pi 4 has a different 3D
render GPU IP than its predecessors. Enable it it on multi v7
and bcm2835 configs.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
Changes since v5:
- Added to bcm2835_defconfig

 arch/arm/configs/bcm2835_defconfig  | 1 +
 arch/arm/configs/multi_v7_defconfig | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index a9ed79b7f871..9270512c14ea 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -106,6 +106,7 @@ CONFIG_REGULATOR_GPIO=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_DRM=y
+CONFIG_DRM_V3D=y
 CONFIG_DRM_VC4=y
 CONFIG_FB_SIMPLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index d6a6811f0539..e2db5cdc66b7 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -731,6 +731,7 @@ CONFIG_DRM_IMX_PARALLEL_DISPLAY=m
 CONFIG_DRM_IMX_TVE=m
 CONFIG_DRM_IMX_LDB=m
 CONFIG_DRM_IMX_HDMI=m
+CONFIG_DRM_V3D=m
 CONFIG_DRM_VC4=m
 CONFIG_DRM_ETNAVIV=m
 CONFIG_DRM_MXSFB=m
-- 
2.36.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 6/6] arm64: config: Enable DRM_V3D

[Peter Robinson]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

BCM2711, the SoC used on the Raspberry Pi 4 has a different GPU than its
predecessors. Enable it.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 50aa3d75ab4f..446bac1ef774 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -738,6 +738,7 @@ CONFIG_DRM_I2C_ADV7511_AUDIO=y
 CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
 CONFIG_DRM_DW_HDMI_CEC=m
 CONFIG_DRM_IMX_DCSS=m
+CONFIG_DRM_V3D=m
 CONFIG_DRM_VC4=m
 CONFIG_DRM_ETNAVIV=m
 CONFIG_DRM_HISI_HIBMC=m
-- 
2.36.1

[PATCH v5 6/6] arm64: config: Enable DRM_V3D

[Peter Robinson]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

BCM2711, the SoC used on the Raspberry Pi 4 has a different GPU than its
predecessors. Enable it.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 50aa3d75ab4f..446bac1ef774 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -738,6 +738,7 @@ CONFIG_DRM_I2C_ADV7511_AUDIO=y
 CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
 CONFIG_DRM_DW_HDMI_CEC=m
 CONFIG_DRM_IMX_DCSS=m
+CONFIG_DRM_V3D=m
 CONFIG_DRM_VC4=m
 CONFIG_DRM_ETNAVIV=m
 CONFIG_DRM_HISI_HIBMC=m
-- 
2.36.1

[PATCH v5 6/6] arm64: config: Enable DRM_V3D

[Peter Robinson]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

BCM2711, the SoC used on the Raspberry Pi 4 has a different GPU than its
predecessors. Enable it.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 50aa3d75ab4f..446bac1ef774 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -738,6 +738,7 @@ CONFIG_DRM_I2C_ADV7511_AUDIO=y
 CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
 CONFIG_DRM_DW_HDMI_CEC=m
 CONFIG_DRM_IMX_DCSS=m
+CONFIG_DRM_V3D=m
 CONFIG_DRM_VC4=m
 CONFIG_DRM_ETNAVIV=m
 CONFIG_DRM_HISI_HIBMC=m
-- 
2.36.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 2/6] drm/v3d: Get rid of pm code

[Emma Anholt]

[-- Attachment #1: Type: text/plain, Size: 955 bytes --]

On Wed, Jun 1, 2022 at 4:03 AM Peter Robinson <pbrobinson@gmail.com> wrote:

> Runtime PM doesn't seem to work correctly on this driver. On top of
> that, commit 8b6864e3e138 ("drm/v3d/v3d_drv: Remove unused static
> variable 'v3d_v3d_pm_ops'") hints that it most likely never did as the
> driver's PM ops were not hooked-up.
>
> So, in order to support regular operation with V3D on BCM2711 (Raspberry
> Pi 4), get rid of the PM code. PM will be reinstated once we figure out
> the underlying issues.
>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
>

If I remember right, I had runtime PM working on non-2711 hardware.  I
never managed to get anyone to help with why 2711's power-on would fail,
and rpi just cranked the clock down as low as it would go as the power
management solution downstream.

I'm not sure what the right thing to do is, given all that.  Just some
context.

[-- Attachment #2: Type: text/html, Size: 1518 bytes --]

Re: [PATCH v5 5/6] ARM: configs: Enable DRM_V3D

[Stefan Wahren]

Am 01.06.22 um 13:02 schrieb Peter Robinson:
> BCM2711, the SoC used on the Raspberry Pi 4 has a different 3D
> render GPU IP than its predecessors. Enable it it on multi v7
> and bcm2835 configs.
>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>

Re: [PATCH v5 5/6] ARM: configs: Enable DRM_V3D

[Stefan Wahren]

Am 01.06.22 um 13:02 schrieb Peter Robinson:
> BCM2711, the SoC used on the Raspberry Pi 4 has a different 3D
> render GPU IP than its predecessors. Enable it it on multi v7
> and bcm2835 configs.
>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 1/6] dt-bindings: gpu: v3d: Add BCM2711's compatible

[Stefan Wahren]

Am 01.06.22 um 13:02 schrieb Peter Robinson:
> BCM2711, Raspberry Pi 4's SoC, contains a V3D core. So add its specific
> compatible to the bindings.
>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>

Re: [PATCH v5 1/6] dt-bindings: gpu: v3d: Add BCM2711's compatible

[Stefan Wahren]

Am 01.06.22 um 13:02 schrieb Peter Robinson:
> BCM2711, Raspberry Pi 4's SoC, contains a V3D core. So add its specific
> compatible to the bindings.
>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 3/6] drm/v3d: Add support for bcm2711

[Stefan Wahren]

[add Melissa]

Am 01.06.22 um 13:02 schrieb Peter Robinson:
> Add compatible string and Kconfig options for bcm2711.
>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
> ---
> Changes since v5:
> - Change compatible to align downstream and othee HW, reorder to suit
>
>   drivers/gpu/drm/v3d/Kconfig   | 2 +-
>   drivers/gpu/drm/v3d/v3d_drv.c | 1 +
>   2 files changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/v3d/Kconfig b/drivers/gpu/drm/v3d/Kconfig
> index e973ec487484..01d91c829107 100644
> --- a/drivers/gpu/drm/v3d/Kconfig
> +++ b/drivers/gpu/drm/v3d/Kconfig
> @@ -1,7 +1,7 @@
>   # SPDX-License-Identifier: GPL-2.0-only
>   config DRM_V3D
>   	tristate "Broadcom V3D 3.x and newer"
> -	depends on ARCH_BCM || ARCH_BRCMSTB || COMPILE_TEST
> +	depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST
>   	depends on DRM
>   	depends on COMMON_CLK
>   	depends on MMU
> diff --git a/drivers/gpu/drm/v3d/v3d_drv.c b/drivers/gpu/drm/v3d/v3d_drv.c
> index 56d5f831e48b..8c7f910daa28 100644
> --- a/drivers/gpu/drm/v3d/v3d_drv.c
> +++ b/drivers/gpu/drm/v3d/v3d_drv.c
> @@ -191,6 +191,7 @@ static const struct drm_driver v3d_drm_driver = {
>   };
>   
>   static const struct of_device_id v3d_of_match[] = {
> +	{ .compatible = "brcm,2711-v3d" },
>   	{ .compatible = "brcm,7268-v3d" },
>   	{ .compatible = "brcm,7278-v3d" },
>   	{},

Re: [PATCH v5 3/6] drm/v3d: Add support for bcm2711

[Stefan Wahren]

[add Melissa]

Am 01.06.22 um 13:02 schrieb Peter Robinson:
> Add compatible string and Kconfig options for bcm2711.
>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
> ---
> Changes since v5:
> - Change compatible to align downstream and othee HW, reorder to suit
>
>   drivers/gpu/drm/v3d/Kconfig   | 2 +-
>   drivers/gpu/drm/v3d/v3d_drv.c | 1 +
>   2 files changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/v3d/Kconfig b/drivers/gpu/drm/v3d/Kconfig
> index e973ec487484..01d91c829107 100644
> --- a/drivers/gpu/drm/v3d/Kconfig
> +++ b/drivers/gpu/drm/v3d/Kconfig
> @@ -1,7 +1,7 @@
>   # SPDX-License-Identifier: GPL-2.0-only
>   config DRM_V3D
>   	tristate "Broadcom V3D 3.x and newer"
> -	depends on ARCH_BCM || ARCH_BRCMSTB || COMPILE_TEST
> +	depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST
>   	depends on DRM
>   	depends on COMMON_CLK
>   	depends on MMU
> diff --git a/drivers/gpu/drm/v3d/v3d_drv.c b/drivers/gpu/drm/v3d/v3d_drv.c
> index 56d5f831e48b..8c7f910daa28 100644
> --- a/drivers/gpu/drm/v3d/v3d_drv.c
> +++ b/drivers/gpu/drm/v3d/v3d_drv.c
> @@ -191,6 +191,7 @@ static const struct drm_driver v3d_drm_driver = {
>   };
>   
>   static const struct of_device_id v3d_of_match[] = {
> +	{ .compatible = "brcm,2711-v3d" },
>   	{ .compatible = "brcm,7268-v3d" },
>   	{ .compatible = "brcm,7278-v3d" },
>   	{},

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 4/6] ARM: dts: bcm2711: Enable V3D

[Stefan Wahren]

Hi Peter,

Am 01.06.22 um 13:02 schrieb Peter Robinson:
> This adds the entry for V3D for bcm2711 (used in the Raspberry Pi 4)
> and the associated firmware clock entry.
>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---
> Changes since v5:
> - Move the firmware clock to bcm2711-rpi.dtsi
>
>   arch/arm/boot/dts/bcm2711-rpi.dtsi |  4 ++++
>   arch/arm/boot/dts/bcm2711.dtsi     | 11 +++++++++++
>   2 files changed, 15 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi
> index ca266c5d9f9b..98817a6675b9 100644
> --- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
> +++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi
> @@ -69,6 +69,10 @@ blconfig: nvram@0 {
>   	};
>   };
>   
> +&v3d {
> +	clocks = <&firmware_clocks 5>;
> +};
> +
>   &vchiq {
>   	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
>   };
> diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
> index 89af57482bc8..177662257b16 100644
> --- a/arch/arm/boot/dts/bcm2711.dtsi
> +++ b/arch/arm/boot/dts/bcm2711.dtsi
> @@ -601,6 +601,17 @@ genet_mdio: mdio@e14 {
>   				#size-cells = <0x0>;
>   			};
>   		};
> +
> +		v3d: gpu@7ec00000 {
> +			compatible = "brcm,bcm2711-v3d";

unfortunately this doesn't match with patch #3 anymore. Except of this 
everything looks good here.

Stefan

> +			reg = <0x0 0x7ec00000 0x4000>,
> +			      <0x0 0x7ec04000 0x4000>;
> +			reg-names = "hub", "core0";
> +
> +			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
> +			resets = <&pm BCM2835_RESET_V3D>;
> +			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> +		};
>   	};
>   };
>   

Re: [PATCH v5 4/6] ARM: dts: bcm2711: Enable V3D

[Stefan Wahren]

Hi Peter,

Am 01.06.22 um 13:02 schrieb Peter Robinson:
> This adds the entry for V3D for bcm2711 (used in the Raspberry Pi 4)
> and the associated firmware clock entry.
>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---
> Changes since v5:
> - Move the firmware clock to bcm2711-rpi.dtsi
>
>   arch/arm/boot/dts/bcm2711-rpi.dtsi |  4 ++++
>   arch/arm/boot/dts/bcm2711.dtsi     | 11 +++++++++++
>   2 files changed, 15 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi
> index ca266c5d9f9b..98817a6675b9 100644
> --- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
> +++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi
> @@ -69,6 +69,10 @@ blconfig: nvram@0 {
>   	};
>   };
>   
> +&v3d {
> +	clocks = <&firmware_clocks 5>;
> +};
> +
>   &vchiq {
>   	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
>   };
> diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
> index 89af57482bc8..177662257b16 100644
> --- a/arch/arm/boot/dts/bcm2711.dtsi
> +++ b/arch/arm/boot/dts/bcm2711.dtsi
> @@ -601,6 +601,17 @@ genet_mdio: mdio@e14 {
>   				#size-cells = <0x0>;
>   			};
>   		};
> +
> +		v3d: gpu@7ec00000 {
> +			compatible = "brcm,bcm2711-v3d";

unfortunately this doesn't match with patch #3 anymore. Except of this 
everything looks good here.

Stefan

> +			reg = <0x0 0x7ec00000 0x4000>,
> +			      <0x0 0x7ec04000 0x4000>;
> +			reg-names = "hub", "core0";
> +
> +			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
> +			resets = <&pm BCM2835_RESET_V3D>;
> +			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> +		};
>   	};
>   };
>   

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 6/6] arm64: config: Enable DRM_V3D

[Stefan Wahren]

Am 01.06.22 um 13:02 schrieb Peter Robinson:
> From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
>
> BCM2711, the SoC used on the Raspberry Pi 4 has a different GPU than its
> predecessors. Enable it.
>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>

Re: [PATCH v5 6/6] arm64: config: Enable DRM_V3D

[Stefan Wahren]

Am 01.06.22 um 13:02 schrieb Peter Robinson:
> From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
>
> BCM2711, the SoC used on the Raspberry Pi 4 has a different GPU than its
> predecessors. Enable it.
>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 4/6] ARM: dts: bcm2711: Enable V3D

[Peter Robinson]

Hi Stefan,

> Am 01.06.22 um 13:02 schrieb Peter Robinson:
> > This adds the entry for V3D for bcm2711 (used in the Raspberry Pi 4)
> > and the associated firmware clock entry.
> >
> > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> > ---
> > Changes since v5:
> > - Move the firmware clock to bcm2711-rpi.dtsi
> >
> >   arch/arm/boot/dts/bcm2711-rpi.dtsi |  4 ++++
> >   arch/arm/boot/dts/bcm2711.dtsi     | 11 +++++++++++
> >   2 files changed, 15 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi
> > index ca266c5d9f9b..98817a6675b9 100644
> > --- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
> > +++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi
> > @@ -69,6 +69,10 @@ blconfig: nvram@0 {
> >       };
> >   };
> >
> > +&v3d {
> > +     clocks = <&firmware_clocks 5>;
> > +};
> > +
> >   &vchiq {
> >       interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> >   };
> > diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
> > index 89af57482bc8..177662257b16 100644
> > --- a/arch/arm/boot/dts/bcm2711.dtsi
> > +++ b/arch/arm/boot/dts/bcm2711.dtsi
> > @@ -601,6 +601,17 @@ genet_mdio: mdio@e14 {
> >                               #size-cells = <0x0>;
> >                       };
> >               };
> > +
> > +             v3d: gpu@7ec00000 {
> > +                     compatible = "brcm,bcm2711-v3d";
>
> unfortunately this doesn't match with patch #3 anymore. Except of this
> everything looks good here.

Good catch, have updated locally, I'll send out a new rev tomorrow,
will give it a day to see if there's other feedback,

P

> Stefan
>
> > +                     reg = <0x0 0x7ec00000 0x4000>,
> > +                           <0x0 0x7ec04000 0x4000>;
> > +                     reg-names = "hub", "core0";
> > +
> > +                     power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
> > +                     resets = <&pm BCM2835_RESET_V3D>;
> > +                     interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> > +             };
> >       };
> >   };
> >

Re: [PATCH v5 4/6] ARM: dts: bcm2711: Enable V3D

[Peter Robinson]

Hi Stefan,

> Am 01.06.22 um 13:02 schrieb Peter Robinson:
> > This adds the entry for V3D for bcm2711 (used in the Raspberry Pi 4)
> > and the associated firmware clock entry.
> >
> > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> > ---
> > Changes since v5:
> > - Move the firmware clock to bcm2711-rpi.dtsi
> >
> >   arch/arm/boot/dts/bcm2711-rpi.dtsi |  4 ++++
> >   arch/arm/boot/dts/bcm2711.dtsi     | 11 +++++++++++
> >   2 files changed, 15 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi
> > index ca266c5d9f9b..98817a6675b9 100644
> > --- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
> > +++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi
> > @@ -69,6 +69,10 @@ blconfig: nvram@0 {
> >       };
> >   };
> >
> > +&v3d {
> > +     clocks = <&firmware_clocks 5>;
> > +};
> > +
> >   &vchiq {
> >       interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> >   };
> > diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
> > index 89af57482bc8..177662257b16 100644
> > --- a/arch/arm/boot/dts/bcm2711.dtsi
> > +++ b/arch/arm/boot/dts/bcm2711.dtsi
> > @@ -601,6 +601,17 @@ genet_mdio: mdio@e14 {
> >                               #size-cells = <0x0>;
> >                       };
> >               };
> > +
> > +             v3d: gpu@7ec00000 {
> > +                     compatible = "brcm,bcm2711-v3d";
>
> unfortunately this doesn't match with patch #3 anymore. Except of this
> everything looks good here.

Good catch, have updated locally, I'll send out a new rev tomorrow,
will give it a day to see if there's other feedback,

P

> Stefan
>
> > +                     reg = <0x0 0x7ec00000 0x4000>,
> > +                           <0x0 0x7ec04000 0x4000>;
> > +                     reg-names = "hub", "core0";
> > +
> > +                     power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
> > +                     resets = <&pm BCM2835_RESET_V3D>;
> > +                     interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> > +             };
> >       };
> >   };
> >

Re: [PATCH v5 4/6] ARM: dts: bcm2711: Enable V3D

[Peter Robinson]

Hi Stefan,

> Am 01.06.22 um 13:02 schrieb Peter Robinson:
> > This adds the entry for V3D for bcm2711 (used in the Raspberry Pi 4)
> > and the associated firmware clock entry.
> >
> > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> > ---
> > Changes since v5:
> > - Move the firmware clock to bcm2711-rpi.dtsi
> >
> >   arch/arm/boot/dts/bcm2711-rpi.dtsi |  4 ++++
> >   arch/arm/boot/dts/bcm2711.dtsi     | 11 +++++++++++
> >   2 files changed, 15 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi
> > index ca266c5d9f9b..98817a6675b9 100644
> > --- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
> > +++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi
> > @@ -69,6 +69,10 @@ blconfig: nvram@0 {
> >       };
> >   };
> >
> > +&v3d {
> > +     clocks = <&firmware_clocks 5>;
> > +};
> > +
> >   &vchiq {
> >       interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> >   };
> > diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
> > index 89af57482bc8..177662257b16 100644
> > --- a/arch/arm/boot/dts/bcm2711.dtsi
> > +++ b/arch/arm/boot/dts/bcm2711.dtsi
> > @@ -601,6 +601,17 @@ genet_mdio: mdio@e14 {
> >                               #size-cells = <0x0>;
> >                       };
> >               };
> > +
> > +             v3d: gpu@7ec00000 {
> > +                     compatible = "brcm,bcm2711-v3d";
>
> unfortunately this doesn't match with patch #3 anymore. Except of this
> everything looks good here.

Good catch, have updated locally, I'll send out a new rev tomorrow,
will give it a day to see if there's other feedback,

P

> Stefan
>
> > +                     reg = <0x0 0x7ec00000 0x4000>,
> > +                           <0x0 0x7ec04000 0x4000>;
> > +                     reg-names = "hub", "core0";
> > +
> > +                     power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
> > +                     resets = <&pm BCM2835_RESET_V3D>;
> > +                     interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> > +             };
> >       };
> >   };
> >

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 1/6] dt-bindings: gpu: v3d: Add BCM2711's compatible

[Rob Herring]

On Wed, 01 Jun 2022 12:02:44 +0100, Peter Robinson wrote:
> BCM2711, Raspberry Pi 4's SoC, contains a V3D core. So add its specific
> compatible to the bindings.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---
> Changes since v5:
> - Change compatible to align downstream and othee HW, reorder to suit
> 
>  Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v5 1/6] dt-bindings: gpu: v3d: Add BCM2711's compatible

[Rob Herring]

On Wed, 01 Jun 2022 12:02:44 +0100, Peter Robinson wrote:
> BCM2711, Raspberry Pi 4's SoC, contains a V3D core. So add its specific
> compatible to the bindings.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---
> Changes since v5:
> - Change compatible to align downstream and othee HW, reorder to suit
> 
>  Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v5 1/6] dt-bindings: gpu: v3d: Add BCM2711's compatible

[Rob Herring]

On Wed, 01 Jun 2022 12:02:44 +0100, Peter Robinson wrote:
> BCM2711, Raspberry Pi 4's SoC, contains a V3D core. So add its specific
> compatible to the bindings.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---
> Changes since v5:
> - Change compatible to align downstream and othee HW, reorder to suit
> 
>  Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 1/6] dt-bindings: gpu: v3d: Add BCM2711's compatible

[Javier Martinez Canillas]

Hello Peter,

On 6/1/22 13:02, Peter Robinson wrote:
> BCM2711, Raspberry Pi 4's SoC, contains a V3D core. So add its specific
> compatible to the bindings.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>

-- 
Best regards,

Javier Martinez Canillas
Linux Engineering
Red Hat

Re: [PATCH v5 1/6] dt-bindings: gpu: v3d: Add BCM2711's compatible

[Javier Martinez Canillas]

Hello Peter,

On 6/1/22 13:02, Peter Robinson wrote:
> BCM2711, Raspberry Pi 4's SoC, contains a V3D core. So add its specific
> compatible to the bindings.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>

-- 
Best regards,

Javier Martinez Canillas
Linux Engineering
Red Hat


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 2/6] drm/v3d: Get rid of pm code

[Javier Martinez Canillas]

On 6/1/22 13:02, Peter Robinson wrote:
> Runtime PM doesn't seem to work correctly on this driver. On top of
> that, commit 8b6864e3e138 ("drm/v3d/v3d_drv: Remove unused static
> variable 'v3d_v3d_pm_ops'") hints that it most likely never did as the
> driver's PM ops were not hooked-up.
> 
> So, in order to support regular operation with V3D on BCM2711 (Raspberry
> Pi 4), get rid of the PM code. PM will be reinstated once we figure out
> the underlying issues.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---

This makes sense to me.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>

-- 
Best regards,

Javier Martinez Canillas
Linux Engineering
Red Hat

Re: [PATCH v5 2/6] drm/v3d: Get rid of pm code

[Javier Martinez Canillas]

On 6/1/22 13:02, Peter Robinson wrote:
> Runtime PM doesn't seem to work correctly on this driver. On top of
> that, commit 8b6864e3e138 ("drm/v3d/v3d_drv: Remove unused static
> variable 'v3d_v3d_pm_ops'") hints that it most likely never did as the
> driver's PM ops were not hooked-up.
> 
> So, in order to support regular operation with V3D on BCM2711 (Raspberry
> Pi 4), get rid of the PM code. PM will be reinstated once we figure out
> the underlying issues.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---

This makes sense to me.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>

-- 
Best regards,

Javier Martinez Canillas
Linux Engineering
Red Hat


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 3/6] drm/v3d: Add support for bcm2711

[Javier Martinez Canillas]

On 6/1/22 13:02, Peter Robinson wrote:
> Add compatible string and Kconfig options for bcm2711.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>

I've one small nit though.

[snip]

>  # SPDX-License-Identifier: GPL-2.0-only
>  config DRM_V3D
>  	tristate "Broadcom V3D 3.x and newer"
> -	depends on ARCH_BCM || ARCH_BRCMSTB || COMPILE_TEST
> +	depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST

The help text for this Kconfig symbol currently says:

        help
          Choose this option if you have a system that has a Broadcom
          V3D 3.x or newer GPU, such as BCM7268.

Maybe you can add "... as BCM7268 or BCM2711." ?

-- 
Best regards,

Javier Martinez Canillas
Linux Engineering
Red Hat

Re: [PATCH v5 3/6] drm/v3d: Add support for bcm2711

[Javier Martinez Canillas]

On 6/1/22 13:02, Peter Robinson wrote:
> Add compatible string and Kconfig options for bcm2711.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>

I've one small nit though.

[snip]

>  # SPDX-License-Identifier: GPL-2.0-only
>  config DRM_V3D
>  	tristate "Broadcom V3D 3.x and newer"
> -	depends on ARCH_BCM || ARCH_BRCMSTB || COMPILE_TEST
> +	depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST

The help text for this Kconfig symbol currently says:

        help
          Choose this option if you have a system that has a Broadcom
          V3D 3.x or newer GPU, such as BCM7268.

Maybe you can add "... as BCM7268 or BCM2711." ?

-- 
Best regards,

Javier Martinez Canillas
Linux Engineering
Red Hat


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 4/6] ARM: dts: bcm2711: Enable V3D

[Javier Martinez Canillas]

On 6/1/22 13:02, Peter Robinson wrote:
> This adds the entry for V3D for bcm2711 (used in the Raspberry Pi 4)
> and the associated firmware clock entry.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---

Once you fix the typo mentioned by Stefan already:

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>

-- 
Best regards,

Javier Martinez Canillas
Linux Engineering
Red Hat

Re: [PATCH v5 4/6] ARM: dts: bcm2711: Enable V3D

[Javier Martinez Canillas]

On 6/1/22 13:02, Peter Robinson wrote:
> This adds the entry for V3D for bcm2711 (used in the Raspberry Pi 4)
> and the associated firmware clock entry.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---

Once you fix the typo mentioned by Stefan already:

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>

-- 
Best regards,

Javier Martinez Canillas
Linux Engineering
Red Hat


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 5/6] ARM: configs: Enable DRM_V3D

[Javier Martinez Canillas]

On 6/1/22 13:02, Peter Robinson wrote:
> BCM2711, the SoC used on the Raspberry Pi 4 has a different 3D
> render GPU IP than its predecessors. Enable it it on multi v7
> and bcm2835 configs.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>

-- 
Best regards,

Javier Martinez Canillas
Linux Engineering
Red Hat

Re: [PATCH v5 5/6] ARM: configs: Enable DRM_V3D

[Javier Martinez Canillas]

On 6/1/22 13:02, Peter Robinson wrote:
> BCM2711, the SoC used on the Raspberry Pi 4 has a different 3D
> render GPU IP than its predecessors. Enable it it on multi v7
> and bcm2835 configs.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>

-- 
Best regards,

Javier Martinez Canillas
Linux Engineering
Red Hat


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 6/6] arm64: config: Enable DRM_V3D

[Javier Martinez Canillas]

On 6/1/22 13:02, Peter Robinson wrote:
> From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> 
> BCM2711, the SoC used on the Raspberry Pi 4 has a different GPU than its
> predecessors. Enable it.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>

-- 
Best regards,

Javier Martinez Canillas
Linux Engineering
Red Hat

Re: [PATCH v5 6/6] arm64: config: Enable DRM_V3D

[Javier Martinez Canillas]

On 6/1/22 13:02, Peter Robinson wrote:
> From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> 
> BCM2711, the SoC used on the Raspberry Pi 4 has a different GPU than its
> predecessors. Enable it.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>

-- 
Best regards,

Javier Martinez Canillas
Linux Engineering
Red Hat


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 2/6] drm/v3d: Get rid of pm code

[nicolas saenz julienne]

On Wed, 2022-06-01 at 12:02 +0100, Peter Robinson wrote:
> Runtime PM doesn't seem to work correctly on this driver. On top of
> that, commit 8b6864e3e138 ("drm/v3d/v3d_drv: Remove unused static
> variable 'v3d_v3d_pm_ops'") hints that it most likely never did as the
> driver's PM ops were not hooked-up.
> 
> So, in order to support regular operation with V3D on BCM2711 (Raspberry
> Pi 4), get rid of the PM code. PM will be reinstated once we figure out
> the underlying issues.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---

Hi Florian, any thoughts on this?
Are brcm,7268-v3d and brcm,7278-v3d using runtime PM downstream?

Nicolas

Re: [PATCH v5 2/6] drm/v3d: Get rid of pm code

[nicolas saenz julienne]

On Wed, 2022-06-01 at 12:02 +0100, Peter Robinson wrote:
> Runtime PM doesn't seem to work correctly on this driver. On top of
> that, commit 8b6864e3e138 ("drm/v3d/v3d_drv: Remove unused static
> variable 'v3d_v3d_pm_ops'") hints that it most likely never did as the
> driver's PM ops were not hooked-up.
> 
> So, in order to support regular operation with V3D on BCM2711 (Raspberry
> Pi 4), get rid of the PM code. PM will be reinstated once we figure out
> the underlying issues.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---

Hi Florian, any thoughts on this?
Are brcm,7268-v3d and brcm,7278-v3d using runtime PM downstream?

Nicolas

Re: [PATCH v5 2/6] drm/v3d: Get rid of pm code

[nicolas saenz julienne]

On Wed, 2022-06-01 at 12:02 +0100, Peter Robinson wrote:
> Runtime PM doesn't seem to work correctly on this driver. On top of
> that, commit 8b6864e3e138 ("drm/v3d/v3d_drv: Remove unused static
> variable 'v3d_v3d_pm_ops'") hints that it most likely never did as the
> driver's PM ops were not hooked-up.
> 
> So, in order to support regular operation with V3D on BCM2711 (Raspberry
> Pi 4), get rid of the PM code. PM will be reinstated once we figure out
> the underlying issues.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---

Hi Florian, any thoughts on this?
Are brcm,7268-v3d and brcm,7278-v3d using runtime PM downstream?

Nicolas

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel