From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jon Smirl Date: Sun, 29 Mar 2009 10:29:45 -0400 Subject: [U-Boot] [PATCH v4] board support patch for phyCORE-MPC5200B-tiny In-Reply-To: References: <20090324155637.12279.60059.stgit@localhost> <9e4733910903251214y1058215l6f4b78ab0b2870a7@mail.gmail.com> <20090327201217.58C92832E406@gemini.denx.de> <9e4733910903271348r19317a71m1a7cea7edbe8ac50@mail.gmail.com> Message-ID: <9e4733910903290729n7f10f704xbd191729a99457ad@mail.gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Sun, Mar 29, 2009 at 10:08 AM, Markus Rathgeb wrote: > Hi! > > Have you read the BIOSEMU stuff in the mailing list? > Can you adjust the PCI section and perhaps you can include the video > example (set undef video). I have v1 of the pcm030 hardware and the baseboard doesn't have a PCI slot. I looked at some of your older emails. It looks like the framebuffer is not accessible. You are hanging on a write to the PCI bus. Forget about running the video BIOS initially, just use the memory commands from u-boot to make sure you can read and write the framebuffer. That will ensure that you have your BARs set, PCI timings right, etc. > > Greats, > Markus -- Jon Smirl jonsmirl at gmail.com