All of lore.kernel.org

 messages from 2010-04-15 21:39:42 to 2010-04-15 22:26:55 UTC [more...]

[U-Boot] [PATCH 1/2] Fix comments for map_flash_by_law1
 2010-04-15 22:26 UTC  (3+ messages)

[PATCH] Disable execmem for sparc
 2010-04-15 22:25 UTC  (2+ messages)

[U-Boot] [PATCH] POST: Added ECC memory test for mpc83xx
 2010-04-15 22:25 UTC  (14+ messages)

[Adeos-main] [Vortx86DX] What's wrong with kernels upper than 2.6.30.10 ?
 2010-04-15 22:24 UTC  (3+ messages)

Unreliable next_msg_id (was Re: [PATCH 2/2] Added SQLite history plugin)
 2010-04-15 22:24 UTC  (3+ messages)

[PATCH] ath5k/ath9k: Fix 64 bits TSF reads
 2010-04-15 22:07 UTC  (2+ messages)
` [ath9k-devel] "

[Bug 15792] New: ext4_inode_inode->i_flags modification is racy
 2010-04-15 22:17 UTC  (2+ messages)
` [Bug 15792] "

[PATCH] Add creation of dev/mapper/control to nightly tests
 2010-04-15 22:15 UTC  (2+ messages)

[PATCH 00/12] A dm-raid45 target implemented using md raid5
 2010-04-15 22:14 UTC  (3+ messages)
` [dm-devel] "

[PATCH 00/27] Book3S_32 (PPC32) KVM support
 2010-04-15 22:11 UTC  (56+ messages)
` [PATCH 05/27] PPC: Split context init/destroy functions
` [PATCH 06/27] KVM: PPC: Add kvm_book3s_64.h
` [PATCH 07/27] KVM: PPC: Add kvm_book3s_32.h
` [PATCH 08/27] KVM: PPC: Add fields to shadow vcpu
` [PATCH 12/27] PPC: Add STLU
  ` [PATCH 01/27] KVM: PPC: Name generic 64-bit code generic
  ` [PATCH 02/27] KVM: PPC: Add host MMU Support
  ` [PATCH 03/27] KVM: PPC: Add SR swapping code
  ` [PATCH 04/27] KVM: PPC: Add generic segment switching code
  ` [PATCH 09/27] KVM: PPC: Improve indirect svcpu accessors
  ` [PATCH 10/27] KVM: PPC: Use KVM_BOOK3S_HANDLER
  ` [PATCH 11/27] KVM: PPC: Use CONFIG_PPC_BOOK3S define
  ` [PATCH 13/27] KVM: PPC: Use now shadowed vcpu fields
  ` [PATCH 14/27] KVM: PPC: Extract MMU init
  ` [PATCH 15/27] KVM: PPC: Make real mode handler generic
  ` [PATCH 16/27] KVM: PPC: Make highmem code generic
  ` [PATCH 17/27] KVM: PPC: Make SLB switching code the new segment framework
  ` [PATCH 18/27] KVM: PPC: Release clean pages as clean
  ` [PATCH 23/27] KVM: PPC: Export MMU variables
  ` [PATCH 24/27] PPC: Export SWITCH_FRAME_SIZE
  ` [PATCH 25/27] KVM: PPC: Check max IRQ prio
` [PATCH 19/27] KVM: PPC: Remove fetch fail code
` [PATCH 20/27] KVM: PPC: Add SVCPU to Book3S_32
` [PATCH 21/27] KVM: PPC: Emulate segment fault
` [PATCH 22/27] KVM: PPC: Add Book3S compatibility code
` [PATCH 26/27] KVM: PPC: Add KVM intercept handlers
` [PATCH 27/27] KVM: PPC: Enable Book3S_32 KVM building

mmotm 2010-04-15-14-42 uploaded
 2010-04-15 21:42 UTC 

[PATCH 1/2] ixp4xx: base support for Arcom Vulcan
 2010-04-15 22:05 UTC  (3+ messages)
` [PATCH 2/2] ixp4xx/vulcan: add PCI support

[U-Boot] [PATCH] fec_mx.c: Fix MX27 FEC logic to check validity of the MAC address in fuse
 2010-04-15 22:03 UTC 

[BUG-REPORT] mirror legs in the same PV with --alloc anywhere
 2010-04-15 22:03 UTC  (2+ messages)

ext34_free_inode's mess
 2010-04-15 22:01 UTC  (5+ messages)

Wiki for LXC with Checkpoint/Restart
 2010-04-15 22:00 UTC  (5+ messages)

[PATCH 0/8] Series short description
 2010-04-15 21:59 UTC  (13+ messages)
` [PATCH 1/8] ir-core: change duration to be coded as a u32 integer
` [PATCH 2/8] ir-core: Add JVC support to ir-core
` [PATCH 3/8] ir-core: Add Sony "
` [PATCH 4/8] ir-core: remove ir-functions usage from dm1105
` [PATCH 5/8] ir-core: convert mantis from ir-functions.c
` [PATCH 6/8] ir-core: fix double spinlock init in drivers/media/IR/rc-map.c
` [PATCH 7/8] ir-core: fix table resize during keymap init
` [PATCH 8/8] ir-core: fix some confusing comments

Access to SIM card when Modem is not "Powered"
 2010-04-15 21:54 UTC  (2+ messages)

[PATCH 1/2] qemu-char.c: Fix memory leaks in qemu_chr_open_pty when openpty fails
 2010-04-15 21:41 UTC  (4+ messages)
` [Qemu-devel] "
` [PATCH 2/2] Add a 'screen' backend to qemu-char.c
  ` [Qemu-devel] "

[PATCH 1/3 v4] Add tracing_off_event() to stop tracing when a bug or warning occur
 2010-04-15 21:49 UTC  (7+ messages)
` [PATCH 2/3] Add tracing_off_event() calls to BUG() and WARN() paths
` [PATCH 3/3] Stop tracing on a schedule bug

strange performance issues with OS X 10.6 client
 2010-04-15 21:49 UTC 

[PATCH] reiserfsprogs: fix use after free with fsck_progress
 2010-04-15 21:48 UTC 

[PATCH 8/8] Implement STATUS polling in atmodem driver
 2010-04-15 21:48 UTC  (2+ messages)

[PATCH 7/8] Add AT driver for STK atom
 2010-04-15 21:48 UTC  (2+ messages)

[RFC] perf_events: support for uncore a.k.a. nest units
 2010-04-15 21:16 UTC  (2+ messages)

unstable branch won't come online
 2010-04-15 21:49 UTC  (4+ messages)

[PATCH 5/8] Remove post-sim atoms after SIM is extracted
 2010-04-15 21:45 UTC  (2+ messages)

[PATCH 6/8] Add SIM "Present" property
 2010-04-15 21:44 UTC  (2+ messages)

[PATCH v3 00/97] ath9k: add AR9003 support
 2010-04-15 21:39 UTC  (96+ messages)
` [PATCH v3 01/97] ath9k_hw: start building an abstraction layer for hardware routines
` [PATCH v3 02/97] ath9k_hw: add silicon revision macros for AR9300
` [PATCH v3 03/97] ath9k_hw: add a macro for abstracting generic timer access
` [PATCH v3 04/97] ath9k_hw: fix a missing hex prefix for a register mask
` [PATCH v3 05/97] ath9k_hw: add simple register abstraction for some AR9300 registers
` [PATCH v3 06/97] ath9k_hw: add support for GPIO differences on AR9003
` [PATCH v3 07/97] ath9k_hw: AR9003 does not have AR_RC_AHB skip its setting
` [PATCH v3 09/97] ath9k_hw: Move some RF ops to the private callbacks
` [PATCH v3 11/97] ath9k_hw: add some comments for ath9k_set_power_network_sleep()
` [PATCH v3 12/97] ath9k_hw: add a private callback for PLL control computation
` [PATCH v3 13/97] ath9k_hw: Add the PCI IDs for AR9300 and fill up the pci_id_tables
` [PATCH v3 14/97] ath9k_hw: Add AR9003 PHY support
` [PATCH v3 15/97] ath9k_hw: move init config and default after chip is up
` [PATCH v3 16/97] ath9k_hw: add the AR9003 ar9003_hw_macversion_supported()
` [PATCH v3 17/97] ath9k_hw: disable ANI for AR9003
` [PATCH v3 18/97] ath9k: disable the MIB interrupt if ANI is disabled
` [PATCH v3 19/97] ath9k_hw: Add hw cap flag for EDMA for the AR9003 family
` [PATCH v3 20/97] ath9k_hw: Fill few hw cap for edma
` [PATCH v3 21/97] ath9k_hw: Add abstraction for rx enable
` [PATCH v3 22/97] ath9k_hw: Fill rx_enable() for the AR9003 hardware family
` [PATCH v3 23/97] ath9k_hw: Add few routines for rx edma support
` [PATCH v3 24/97] ath9k_hw: update the chip tests for AR9003
` [PATCH v3 25/97] ath9k_hw: prevent reset control register zeroing on AR9003 reset
` [PATCH v3 26/97] ath9k_hw: Add AR9003 PHY register definitions
` [PATCH v3 27/97] ath9k_hw: add common channel select helpers for ar900[23]
` [PATCH v3 28/97] ath9k_hw: Set the channel on AR9003
` [PATCH v3 29/97] ath9k_hw: Implement PLL control "
` [PATCH v3 30/97] ath9k_hw: Implement spur mitigation "
` [PATCH v3 31/97] ath9k_hw: split initvals.h by hardware family
` [PATCH v3 32/97] ath9k_hw: add initvals for the AR9003 "
` [PATCH v3 33/97] ath9k_hw: add helpers for processing the AR9003 INI
` [PATCH v3 34/97] ath9k_hw: Split off ANI control to the PHY ops
` [PATCH v3 35/97] ath9k_hw: add all the AR9003 PHY callbacks
` [PATCH v3 36/97] ath9k_hw: Define tx control struct for AR9003
` [PATCH v3 37/97] ath9k_hw: Move code which populates ds_data to ath9k_hw
` [PATCH v3 38/97] ath9k_hw: Add abstraction to set/get link pointer
` [PATCH v3 39/97] ath9k: Use abstraction to get "
` [PATCH v3 40/97] ath9k: Use memcpy in ath_clone_txbuf()
` [PATCH v3 41/97] ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this purpose
` [PATCH v3 42/97] ath9k: Make bf_desc of ath_buf opaque
` [PATCH v3 43/97] ath9k: Add Rx EDMA support
` [PATCH v3 44/97] ath9k_hw: Split out the function for reading the noise floor
` [PATCH v3 45/97] ath9k_hw: the eep_map is used only for AR9280 PCI card ini fixup
` [PATCH v3 46/97] ath9k_hw: add a helper for Power Amplifier calibration for AR9002
` [PATCH v3 47/97] ath9k_hw: add a helper for the OLC tem compensation "
` [PATCH v3 48/97] ath9k_hw: rename PA calib for AR9287
` [PATCH v3 49/97] ath9k_hw: shift code for AR9280 OLC temp comp
` [PATCH v3 50/97] ath9k_hw: move the AR9280 OLC temp comp to its own helper
` [PATCH v3 51/97] ath9k_hw: simplify OLC temp compensation for AR9002
` [PATCH v3 52/97] ath9k_hw: rename the PA calib routines to match their families
` [PATCH v3 53/97] ath9k_hw: rename getNoiseFloorThresh() to ath9k_hw_loadnf()
` [PATCH v3 54/97] ath9k_hw: move the cal AR9100 calibration settings
` [PATCH v3 55/97] ath9k_hw: split calib code by hardware families
` [PATCH v3 56/97] ath9k_hw: add the AR9003 ar9003_hw_init_cal callback
` [PATCH v3 57/97] ath9k_hw: add the config_pci_powersave AR9003 callback
` [PATCH v3 58/97] ath9k_hw: split the generic hardware code by hardware family
` [PATCH v3 59/97] ath9k_hw: move the cck channel 14 INI to the AR9002 hw code
` [PATCH v3 60/97] ath9k_hw: move TX/RX gain INI stuff to its own hardware family code
` [PATCH v3 61/97] ath9k_hw: Abstract the routine which returns interrupt status
` [PATCH v3 62/97] ath9k_hw: Initialize interrupt mask for AR9003
` [PATCH v3 63/97] ath9k_hw: abstract the AR_PHY_AGC_CONTROL register access
` [PATCH v3 64/97] ath9k_hw: abstract loading noisefloor
` [PATCH v3 65/97] ath9k_hw: fill in the callbacks for calibration for AR9003
` [PATCH v3 66/97] ath9k_hw: complete AR9003 calibration
` [PATCH v3 67/97] ath9k_hw: rename eep_AR9287_ops to eep_ar9287_ops
` [PATCH v3 68/97] ath9k_hw: restore mac address reading logic
` [PATCH v3 69/97] ath9k_hw: Implement AR9003 eeprom callbacks
` [PATCH v3 70/97] ath9k_hw: add OFDM spur mitigation for AR9003
` [PATCH v3 71/97] ath9k_hw: Fill get_isr() "
` [PATCH v3 72/97] ath9k_hw: move AR9280 PCI EEPROM fix to eeprom_def.c
` [PATCH v3 73/97] ath9k_hw: move the RF claim stuff to AR9002 hardware family
` [PATCH v3 74/97] ath9k_hw: Configure Tx interrupt mitigation timer
` [PATCH v3 75/97] ath9k_hw: add the AR9300 SREV hw name print
` [PATCH v3 76/97] ath9k_hw: add TX/RX gain register initialization for AR9003
` [PATCH v3 77/97] ath9k_hw: Update ath9k_hw_set_dma for AR9300
` [PATCH v3 78/97] ath9k_hw: skip asynch fifo enablement to AR9003
` [PATCH v3 79/97] ath9k_hw: skip WEP aggregation enable code for AR9003
` [PATCH v3 80/97] ath9k: Load SW filtered NF values and start NF cal during full reset "
` [PATCH v3 81/97] ath9k_hw: Define abstraction for tx desc access
` [PATCH v3 82/97] ath9k_hw: Add function to configure tx status ring buffer
` [PATCH v3 83/97] ath9k_hw: move AR9002 mac ops to its own file
` [PATCH v3 84/97] ath9k_hw: Fill descriptor abstrations for AR9003
` [PATCH v3 85/97] ath9k: add RXLP and RXHP to debugfs counters
` [PATCH v3 86/97] ath9k_hw: enable CRC check of descriptors for AR9003
` [PATCH v3 87/97] ath9k_hw: set cwmin and cwmax to 0 for for AR9003 upon txq reset
` [PATCH v3 88/97] ath9k: Setup appropriate tx desc for regular dma and edma
` [PATCH v3 89/97] ath9k: Initialize and configure tx status for EDMA
` [PATCH v3 90/97] ath9k_hw: Compute pointer checksum over the link descriptor
` [PATCH v3 91/97] ath9k: Add Tx EDMA support
` [PATCH v3 92/97] mac80211: add LDPC control flag
` [PATCH v3 93/97] ath9k_hw: add LDPC support for AR9003
` [PATCH v3 94/97] ath9k: add LDPC support
` [PATCH v3 95/97] ath9k: Enable TXOK and TXERR interrupts for TX EDMA
` [PATCH v3 96/97] ath9k_hw: Abort rx if hw is not coming out of full sleep in reset
` [PATCH v3 97/97] ath9k_hw: add the PCI ID for the first AR9300 device