messages from 2020-09-30 15:20:40 to 2020-09-30 15:34:23 UTC [more...]
[igt-dev] [v4 0/2] New subtest for VRR Flipline mode
2020-09-30 15:34 UTC (4+ messages)
` [igt-dev] [v4 2/2] tests/kms_vrr: Add new subtest to validate "
[PATCH V9 0/4] fuse: Add support for passthrough read/write
2020-09-30 15:33 UTC (2+ messages)
[PATCH] arm: Kconfig: Explain TFABOOT
2020-09-30 15:33 UTC (2+ messages)
Pull request: u-boot-riscv/next 20200930
2020-09-30 15:32 UTC (2+ messages)
[PATCH] mm: Fix potential memory leak in sys_swapon
2020-09-30 15:32 UTC (2+ messages)
[Bug 1897481] [NEW] qemu crashes with VGA pass-through, e-GPU, nvidia 1060
2020-09-30 15:14 UTC (3+ messages)
` [Bug 1897481] "
[PATCH] tools/xenstore: set maximum number of grants needed
2020-09-30 15:31 UTC (6+ messages)
[PATCH v6 1/3] arm64: dts: Add a device tree for the Librem 5 phone
2020-09-30 15:30 UTC (6+ messages)
` [PATCH v6 2/3] MAINTAINERS: Add Purism Librem 5 section to the list
[PATCH v3 0/3] iommu/tegra-smmu: Add PCI support
2020-09-30 15:31 UTC (13+ messages)
` [PATCH v3 1/3] memory: tegra: Add devm_tegra_get_memory_controller()
` [PATCH v3 2/3] iommu/tegra-smmu: Rework .probe_device and .attach_dev
[Intel-gfx] [PATCH v2 00/11] drm/i915: Plumb crtc state to link training code
2020-09-30 15:31 UTC (9+ messages)
` [Intel-gfx] [PATCH v2 06/11] drm/i915: Split ICL MG PHY buf trans per output type
` [Intel-gfx] [PATCH v2 07/11] drm/i915: Split EHL combo "
` [Intel-gfx] [PATCH v2 08/11] drm/i915: Split TGL "
` [Intel-gfx] [PATCH v2 09/11] drm/i915: Split TGL DKL "
[PATCH net-next 0/3] net: atlantic: phy tunables from mac driver
2020-09-30 15:31 UTC (5+ messages)
` ethtool/phy tunables and extack (was Re: [PATCH net-next 0/3] net: atlantic: phy tunables from mac driver)
[PATCH] libxfs: disallow filesystems with reverse mapping and reflink and realtime
2020-09-30 15:31 UTC (2+ messages)
[PATCH v4 0/6] kasan: add workqueue and timer stack for generic KASAN
2020-09-30 15:29 UTC (4+ messages)
[PATCH 000/100] CCS driver
2020-09-30 15:28 UTC (101+ messages)
` [PATCH 001/100] smiapp: Add CCS register definitions and limits
` [PATCH 002/100] smiapp: Use CCS register flags
` [PATCH 003/100] smiapp: Calculate CCS limit offsets and limit buffer size
` [PATCH 004/100] smiapp: Remove macros for defining registers, merge definitions
` [PATCH 005/100] smiapp: Add macros for accessing CCS registers
` [PATCH 006/100] smiapp: Use MIPI CCS version and manufacturer ID information
` [PATCH 007/100] smiapp: Read CCS limit values
` [PATCH 008/100] smiapp: Switch to CCS limits
` [PATCH 009/100] smiapp: Obtain frame descriptor from "
` [PATCH 010/100] smiapp: Use CCS limits in reading data format descriptors
` [PATCH 011/100] smiapp: Use CCS limits in reading binning capabilities
` [PATCH 012/100] smiapp: Use CCS registers
` [PATCH 013/100] smiapp: Remove quirk function for writing a single 8-bit register
` [PATCH 014/100] smiapp: Rename register access functions
` [PATCH 015/100] smiapp: Internal rename to CCS
` [PATCH 016/100] smiapp: Differentiate CCS sensors from SMIA in subdev naming
` [PATCH 017/100] smiapp: Rename as "ccs"
` [PATCH 018/100] ccs: Remove profile concept
` [PATCH 019/100] ccs: Give all subdevs a function
` [PATCH 020/100] dt-bindings: Add vendor prefix for MIPI Alliance
` [PATCH 021/100] dt-bindings: nokia,smia: Fix link-frequencies documentation
` [PATCH 022/100] dt-bindings: nokia,smia: Make vana-supply optional
` [PATCH 023/100] dt-bindings: nokia,smia: Convert to YAML
` [PATCH 024/100] dt-bindings: nokia,smia: Use better active polarity for reset
` [PATCH 025/100] dt-bindings: Amend SMIA bindings with MIPI CCS support
` [PATCH 026/100] dt-bindings: Add bus-type for C-PHY support
` [PATCH 027/100] ccs: Request for "reset" GPIO
` [PATCH 028/100] ccs: Add "mipi,ccs" compatible string
` [PATCH 029/100] ccs: Remove the I²C ID table
` [PATCH 030/100] ccs: Remove remaining support for platform data
` [PATCH 031/100] ccs: Make hwcfg part of the device specific struct
` [PATCH 032/100] ccs: Add CCS static data parser library
` [PATCH 033/100] ccs: Combine revision number major and minor into one
` [PATCH 034/100] ccs: Read CCS static data from firmware binaries
` [PATCH 035/100] ccs: Stop reading arrays after the first zero
` [PATCH 036/100] ccs: The functions to get compose or crop rectangle never return NULL
` [PATCH 037/100] ccs: Replace somewhat harsh internal checks based on BUG with WARN_ON
` [PATCH 038/100] ccs: Refactor register reading a little
` [PATCH 039/100] ccs: Make real to integer number conversion optional
` [PATCH 040/100] ccs: Move limit value real to integer conversion from read to access time
` [PATCH 041/100] ccs: Read ireal numbers correctly
` [PATCH 042/100] smiapp-pll: Rename as ccs-pll
` [PATCH 043/100] ccs: Change my e-mail address
` [PATCH 044/100] ccs: Add support for manufacturer regs from sensor and module files
` [PATCH 045/100] ccs: Use static data read-only registers
` [PATCH 046/100] ccs: Clean up runtime PM usage
` [PATCH 047/100] ccs: Wrap long lines, unwrap short ones
` [PATCH 048/100] ccs: Add device compatible identifiers for telling SMIA and CCS apart
` [PATCH 049/100] ccs: Use longer pre-I²C sleep for CCS compliant devices
` [PATCH 050/100] ccs-pll: Don't use div_u64 to divide a 32-bit number
` [PATCH 051/100] ccs-pll: Split limits and PLL configuration into front and back parts
` [PATCH 052/100] ccs-pll: Use correct VT divisor for calculating VT SYS divisor
` [PATCH 053/100] ccs-pll: End search if there are no better values available
` [PATCH 054/100] ccs-pll: Remove parallel bus support
` [PATCH 055/100] ccs-pll: Differentiate between CSI-2 D-PHY and C-PHY
` [PATCH 056/100] ccs-pll: Move the flags field down, away from 8-bit fields
` [PATCH 057/100] ccs-pll: Document the structs in the header as well as the function
` [PATCH 058/100] ccs-pll: Use the BIT macro
` [PATCH 059/100] ccs-pll: Begin calculation from OP system clock frequency
` [PATCH 060/100] ccs-pll: Fix condition for pre-PLL divider lower bound
` [PATCH 061/100] ccs-pll: Avoid overflow in pre-PLL divisor lower bound search
` [PATCH 062/100] ccs-pll: Fix comment on check against maximum PLL multiplier
` [PATCH 063/100] ccs-pll: Fix check for PLL multiplier upper bound
` [PATCH 064/100] ccs-pll: Use explicit 32-bit unsigned type
` [PATCH 065/100] ccs-pll: Add support for lane speed model
` [PATCH 066/100] ccs: "
` [PATCH 067/100] ccs-pll: Add support for decoupled OP domain calculation
` [PATCH 068/100] ccs-pll: Add support for extended input PLL clock divider
` [PATCH 069/100] ccs-pll: Support two cycles per pixel on OP domain
` [PATCH 070/100] ccs-pll: Add support flexible OP PLL pixel clock divider
` [PATCH 071/100] ccs-pll: Add sanity checks
` [PATCH 072/100] ccs-pll: Add C-PHY support
` [PATCH 073/100] ccs-pll: Split off VT subtree calculation
` [PATCH 074/100] ccs-pll: Check for derating and overrating, support non-derating sensors
` [PATCH 075/100] ccs-pll: Better separate OP and VT sub-tree calculation
` [PATCH 076/100] ccs-pll: Print relevant information on PLL tree
` [PATCH 077/100] ccs-pll: Rework bounds checks
` [PATCH 078/100] ccs-pll: Make VT divisors 16-bit
` [PATCH 079/100] ccs-pll: Fix VT post-PLL divisor calculation
` [PATCH 080/100] ccs-pll: Separate VT divisor limit calculation from the rest
` [PATCH 081/100] ccs-pll: Add trivial dual PLL support
` [PATCH 082/100] ccs: Dual "
` [PATCH 083/100] ccs-pll: Add support for DDR OP system and pixel clocks
` [PATCH 084/100] ccs: Add support for DDR OP SYS and OP PIX clocks
` [PATCH 085/100] ccs: Print written register values
` [PATCH 086/100] ccs-pll: Print pixel rates
` [PATCH 087/100] ccs: Add support for obtaining C-PHY configuration from firmware
` [PATCH 088/100] ccs: Add digital gain support
` [PATCH 089/100] ccs: Add support for old-style SMIA digital gain
` [PATCH 090/100] ccs: Remove analogue gain field
` [PATCH 091/100] ccs: Only add analogue gain control if the device supports it
` [PATCH 092/100] v4l: Add user control base for CCS controls
` [PATCH 093/100] v4l: uapi: Add controls for analogue gain constants
` [PATCH 094/100] ccs: Add support for analogue gain coefficient controls
` [PATCH 095/100] v4l: uapi: Add controls for CCS alternative analogue gain
` [PATCH 096/100] ccs: Add support for alternate analogue global gain
` [PATCH 097/100] ccs: Add debug prints for MSR registers
` [PATCH 098/100] v4l: uapi: Add CCS controls for correction configuration and capabilities
` [PATCH 099/100] ccs: Add shading correction and luminance correction level controls
` [PATCH 100/100] smiapp: Add CCS ACPI device ID
[Intel-gfx] [PATCH] drm/i915: don't conflate is_dgfx with fake lmem
2020-09-30 15:30 UTC
[linux-next:master 11137/12330] drivers/perf/arm-cmn.c:1329:4: warning: format specifies type 'unsigned short' but the argument has underlying type 'unsigned int'
2020-09-30 15:30 UTC
[dpdk-dev] [RFC] app/testpmd: distinguish ICMP identifier fields in packet
2020-09-30 15:30 UTC (4+ messages)
` [dpdk-dev] [RFC v2 1/1] "
Request to create repository google-ipmi-bmc-health
2020-09-30 15:27 UTC
[PATCH v2 0/3] Add reboot mode support
2020-09-30 15:30 UTC (3+ messages)
[PULL 00/13] Block patches
2020-09-30 15:28 UTC (3+ messages)
` [PULL 13/13] qemu/atomic.h: rename atomic_ to qatomic_
[linux-next:master 3272/11956] undefined reference to `ioread64_hi_lo'
2020-09-30 15:29 UTC (2+ messages)
[PATCH] qemu-storage-daemon: Fix help line for --export
2020-09-30 14:59 UTC (3+ messages)
[PULL 0/2] acpi: unit test
2020-09-30 15:18 UTC (2+ messages)
[PATCH v4 1/2] dt-bindings: usb: Add binding for discrete onboard USB hubs
2020-09-30 15:28 UTC (7+ messages)
[PATCH] x86/vdso: Remove retpoline from SGX vDSO call
2020-09-30 15:28 UTC (5+ messages)
[PATCH 0/4] ASoC: SOF: cleanups for 5.10
2020-09-30 15:20 UTC (5+ messages)
` [PATCH 1/4] ASoC: SOF: control: remove const in sizeof()
` [PATCH 2/4] ASoC: SOF: topology: "
` [PATCH 3/4] ASoC: SOF: sof-audio: remove goto used for force-nocodec support
` [PATCH 4/4] ASoC: SOF: loader: handle all SOF_IPC_EXT types
[PATCH v8 0/7] Qualcomm's lpass-hdmi ASoC driver to support audio over dp port
2020-09-30 15:27 UTC (3+ messages)
` [PATCH v8 5/7] ASoC: qcom: Add support for lpass hdmi driver
[PATCH] memcg: introduce per-memcg reclaim interface
2020-09-30 15:26 UTC (3+ messages)
[RFC PATCH seccomp 0/2] seccomp: Add bitmap cache of arg-independent filter results that allow syscalls
2020-09-30 15:19 UTC (9+ messages)
` [PATCH v3 seccomp 0/5] seccomp: Add bitmap cache of constant allow filter results
` [PATCH v3 seccomp 1/5] x86: Enable seccomp architecture tracking
` [PATCH v3 seccomp 2/5] seccomp/cache: Add "emulator" to check if filter is constant allow
` [PATCH v3 seccomp 3/5] seccomp/cache: Lookup syscall allowlist for fast path
` [PATCH v3 seccomp 4/5] selftests/seccomp: Compare bitmap vs filter overhead
` [PATCH v3 seccomp 5/5] seccomp/cache: Report cache data through /proc/pid/seccomp_cache
[PATCH v3 00/11] CMake and Visual Studio
2020-09-30 15:26 UTC (12+ messages)
` [PATCH v4 00/10] "
` [PATCH v4 01/10] cmake: ignore files generated by CMake as run in "
` [PATCH v4 02/10] cmake: do find Git for Windows' shell interpreter
` [PATCH v4 03/10] cmake: ensure that the `vcpkg` packages are found on Windows
` [PATCH v4 04/10] cmake: fall back to using `vcpkg`'s `msgfmt.exe` "
` [PATCH v4 05/10] cmake: quote the path accurately when editing `test-lib.sh`
` [PATCH v4 06/10] cmake (Windows): let the `.dll` files be found when running the tests
` [PATCH v4 07/10] cmake (Windows): complain when encountering an unknown compiler
` [PATCH v4 08/10] cmake (Windows): initialize vcpkg/build dependencies automatically
` [PATCH v4 09/10] cmake (Windows): recommend using Visual Studio's built-in CMake support
` [PATCH v4 10/10] hashmap_for_each_entry(): workaround MSVC's runtime check failure #3
[PATCH v6 0/6] mm: introduce memfd_secret system call to create "secret" memory areas
2020-09-30 15:25 UTC (15+ messages)
` [PATCH v6 5/6] mm: secretmem: use PMD-size pages to amortize direct map fragmentation
[dpdk-dev] [PATCH 0/7] cmdline: support Windows
2020-09-30 15:26 UTC (7+ messages)
` [dpdk-dev] [PATCH v2 "
` [dpdk-dev] [PATCH v2 1/7] cmdline: make implementation opaque
[PATCH v1 00/20] s390x/tcg: Implement Vector enhancements facility and switch to z14
2020-09-30 14:55 UTC (4+ messages)
` [PATCH v1 14/20] s390x/tcg: Implement 32/128 bit for VECTOR FP SQUARE ROOT
` [PATCH v1 18/20] s390x/tcg: Implement VECTOR FP (MAXIMUM|MINIMUM)
` [PATCH v1 20/20] s390x/cpumodel: Bump up QEMU model to a stripped-down IBM z14 GA2
[PATCH v5 00/14] hw/block/nvme: Support Namespace Types and Zoned Namespace Command Set
2020-09-30 15:12 UTC (3+ messages)
` [PATCH v5 09/14] hw/block/nvme: Support "
[PATCH] linux-user: correct errno returned from accept4() syscall
2020-09-30 15:16 UTC
[PATCH 2/2] quectel: Power on/off with a gpio pulse
2020-09-30 15:25 UTC (2+ messages)
[PATCH next v2 0/2] printk: fix reading beyond buffer
2020-09-30 15:25 UTC (3+ messages)
` [PATCH next v2 1/2] printk: avoid and/or handle record truncation
[PATCH 00/10] CMake and Visual Studio
2020-09-30 15:25 UTC (4+ messages)
` [PATCH 08/10] cmake (Windows): initialize vcpkg/build dependencies automatically
[RFC-PATCH 2/4] mm: Add __rcu_alloc_page_lockless() func
2020-09-30 15:25 UTC (11+ messages)
[PATCH v3 0/9] regmap: Add managed API, regmap fields, regmap config
2020-09-30 15:25 UTC (3+ messages)
[dpdk-dev] [PATCH 1/2] net/virtio: setup Tx region for packed ring
2020-09-30 15:24 UTC (4+ messages)
` [dpdk-dev] [PATCH 2/2] net/virtio: use indirect ring in packed datapath
[PATCH v6 0/4] Spilt PCIe node to comply with hardware design
2020-09-30 15:23 UTC (5+ messages)
` [PATCH v6 2/4] PCI: mediatek: Add new method to get shared pcie-cfg base and irq
[PATCH v5 bpf-next 00/12] BPF TCP header options
2020-09-30 15:23 UTC (3+ messages)
` [PATCH v5 bpf-next 09/12] bpf: tcp: Allow bpf prog to write and parse TCP header option
[PATCH v2 0/4] qemu-storage-daemon: Remove QemuOpts from --object parser
2020-09-30 15:10 UTC (4+ messages)
` [PATCH v2 1/4] keyval: Parse help options
[PATCH 1/4] libsepol: Get rid of the old and duplicated symbols
2020-09-30 15:22 UTC (3+ messages)
` [PATCH 4/4] libsemanage: Bump libsemanage.so version
[PATCH v3 bpf-next 0/2] introduce BPF_F_PRESERVE_ELEMS
2020-09-30 15:20 UTC (3+ messages)
` [PATCH v3 bpf-next 1/2] bpf: introduce BPF_F_PRESERVE_ELEMS for perf event array
` [PATCH v3 bpf-next 2/2] selftests/bpf: add tests for BPF_F_PRESERVE_ELEMS
[PATCH 0/6] can: add support for ETAS ES58X CAN USB
2020-09-30 15:21 UTC (3+ messages)
` [PATCH v2 2/6] can: dev: add a helper function to get the correct length of Classical frames
[PATCH v2 1/2] devfreq: qcom: Add L2 Krait Cache devfreq scaling driver
2020-09-30 15:21 UTC (5+ messages)
[PATCH] parisc: Add ioread64_hi_lo() and iowrite64_hi_lo()
2020-09-30 15:20 UTC
[patch V2 00/46] x86, PCI, XEN, genirq ...: Prepare for device MSI
2020-09-30 15:20 UTC (6+ messages)
[dpdk-dev] [PATCH v1 1/1] net/mlx5: support match ICMP identifier fields
2020-09-30 15:20 UTC (4+ messages)
` [dpdk-dev] [PATCH v2 "
page: next (older) | prev (newer) | latest
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.