Met vriendelijke groet / kind regards,
Mike Looijmans
Topic Embedded Systems | ||
Eindhovenseweg 32c | T: | +31 (0)499 33 69 79 |
5683 KH Best | F: | +31 (0)499 33 69 70 |
Postbus 440 | E: | mike.looijmans@topic.nl |
5680 AK Best | W: | www.topic.nl |
Dit e-mail bericht en de eventueel daarbij behorende bijlagen zijn uitsluitend bestemd voor de geadresseerde, zoals die blijkt uit het e-mail bericht en/of de bijlagen. Er kunnen gegevens met betrekking tot een derde instaan. Indien u als niet-geadresseerde dit bericht en de bijlagen ontvangt, terwijl u niet bevoegd of gemachtigd bent om dit bericht namens de geadresseerde te ontvangen, wordt u verzocht de afzender hierover direct te informeren en het e-mail bericht met de bijlagen te vernietigen. Ieder gebruik van de inhoud van het e-mail bericht, waaronder de daarbij behorende bijlagen, door een ander dan de geadresseerde is onrechtmatig jegens ons dan wel de eventueel in het e-mail bericht of de bijlagen voorkomende andere personen. TOPIC Embedded Systems is niet aansprakelijk voor enigerlei schade voortvloeiend uit het gebruik en/of acceptatie van dit e-mail bericht of de daarbij behorende bijlagen.
On 02/01/2013 01:59 PM, Mike Looijmans wrote:Well, here's an example of me switching from "vusolo2" to "et9x00" in the current state of OE. I'm migrating this from a year-old or so state of OE-core to the present.
On 02/01/2013 11:29 AM, Burton, Ross wrote:
On 1 February 2013 07:51, Mike Looijmans <mike.looijmans@topic.nl> wrote:
A concrete example might help.
Would be glad to comply, if you care to explain what you need. What
should I
do, which logging to collect (and maybe how)?
To start with just the two machines you are changing between and the
packages/tasks that are re-ran.
On the "old" system (not "classic" openembedded, just a much older oe-core!) switching would result in just immediately building rootfs, and nothing more.
Now when I change MACHINE from one to the other, after just having built, it runs hundreds of tasks, and it takes a few minutes to do all that.
$ export MACHINE=et9x00
$ bitbake my-image
$ export MACHINE=vusolo2
$ bitbake my-image > /tmp/bitbake.log
$ export MACHINE=et9x00
$ bitbake my-image > /tmp/bitbake.log
I've attached the two log files.
WHY is it doing all that? None of these packages are machine specific!
--
Mike Looijmans - Topic Automation
_______________________________________________
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core