From: <valentin.meriel@gmail.com>
To: "Zhang, Yang Z" <yang.z.zhang@intel.com>, xen-devel@lists.xen.org
Subject: Re: Bug Xen-4.4.0-RC6 with Hyper-V on Server 2012 R2.
Date: Wed, 5 Mar 2014 21:59:47 +0100 [thread overview]
Message-ID: <A9DF756F6B2E4AE5A5944393D3452454@ValPC> (raw)
In-Reply-To: <A9667DDFB95DB7438FA9D7D576C3D87E0A9FDE5A@SHSMSX104.ccr.corp.intel.com>
Yeah, thanks it's work ^^.
But i think you should probably add this information on the wiki.
-----Message d'origine-----
From: Zhang, Yang Z
Sent: Wednesday, March 05, 2014 5:32 AM
To: valentin.meriel@gmail.com ; xen-devel@lists.xen.org
Subject: RE: [Xen-devel] Bug Xen-4.4.0-RC6 with Hyper-V on Server 2012 R2.
valentin.meriel@gmail.com wrote on 2014-03-04:
> Ok,
>
> So the two patch work ok, but now the last error is the "screen flush
> issue", in SDL or VNC i did not found a solution (i saw force screen
> refresh in the wiki but, i do not know how to enable it).
I used to modify the QEMU code manually.
hw/display/vga.c
s/full_update = 0/full_update = 1/g
Besides, you can press ctrl_alt_1 to flush scree manually. Or using remote
desktop to connect windows guest.
>
> But thanks for all.
>
> -----Message d'origine-----
> From: Zhang, Yang Z
> Sent: Monday, March 03, 2014 2:54 AM
> To: valentin.meriel@gmail.com ; xen-devel@lists.xen.org
> Subject: RE: [Xen-devel] Bug Xen-4.4.0-RC6 with Hyper-V on Server 2012 R2.
>
> valentin.meriel@gmail.com wrote on 2014-03-03:
>> Ok thank you.
>>
>> I'll try tomorrow, but there is no mention of Hyper-V in the wiki
>> for these patch, only VMware.
>
> For boot hyper-v, there is no patch is needed, only the screen flush
> issue.
> But to boot guest, you need the two patches (It seems one of them is
> accepted).I will update the wiki later.
>
>>
>>
>> From: Zhang, Yang Z <mailto:yang.z.zhang@intel.com> Sent: Monday,
>> March 03, 2014 2:12 AM To: Valentin Meriel
>> <mailto:valentin.meriel@gmail.com>
>> ; xen-devel@lists.xen.org Subject: RE: [Xen-devel] Bug Xen-4.4.0-RC6
>> with Hyper-V on Server 2012 R2.
>>
>>
>> Please refer the following link:
>>
>> http://wiki.xenproject.org/wiki/Xen_nested
>> <http://wiki.xenproject.org/wiki/Xen_nested>
>>
>>
>>
>> Also the following patch is missing if you want to boot VMware,
>> Hyper-v on top of Xen:
>>
>> http://www.gossamer-threads.com/lists/xen/devel/316994
>> <http://www.gossamer-threads.com/lists/xen/devel/316994>
>>
>> http://www.gossamer-threads.com/lists/xen/devel/316993
>> <http://www.gossamer-threads.com/lists/xen/devel/316993>
>>
>>
>>
>>
>>
>> NB: the screen flush has issue with hyper-v: screen stuck but the
>> VM still was running just like you mentioned that “Vm stuck on the
>> first screen”.
>>
>>
>>
>> Best regards,
>>
>> Yang
>>
>>
>>
>> From: xen-devel-bounces@lists.xen.org
>> [mailto:xen-devel-bounces@lists.xen.org] On Behalf Of Valentin
>> Meriel
>> Sent: Monday, March 03, 2014 5:48 AM
>> To: xen-devel@lists.xen.org
>> Subject: [Xen-devel] Bug Xen-4.4.0-RC6 with Hyper-V on Server 2012 R2.
>>
>>
>>
>> Hello,
>>
>> I have a probleme with Xen-4.4.0-rc6.
>>
>> I try to use Hyper-V on Xen 4.4.0, because of none sucess with KVM
>> and Qemu.
>> I want to because i want to passthrough one (or more) VGA card to
>> Hyper-V to test remoteFX (just for test if it work).
>>
>> So on KVM-Qemu i can not install Hyper-V on Windows Server 2012 R2
>> because of an allready runnig Hypervisor.
>> On Xen i have the same "error" but if i add :
>> hap = 1
>> nestedhvm = 1
>> cpuid = ['0x1:ecx=0xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx']
>> to my config file, i can install Hyper-V role, but when the VM
>> restart it does not work, the Vm stuck on the first screen with the
>> Windows logo.
>>
>> To make the VM start again i have to comment out cpuid =
>> ['0x1:ecx=0xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'] and after the VM can
>> start, but when i whant to start the L2 VM (the Hyper-V's VM)
>> Hyper-V cant because one of this service is not started (or something
>> like that).
>>
>> Have you an idea ? Because in the wiki it's say it's work.
>>
>>
>> This is xl dmesg :
>>
>> Xen 4.4-rc (XEN) Xen version 4.4-rc (root@) (gcc (Ubuntu/Linaro
>> 4.8.1-10ubuntu9) 4.8.1) debug=n Sun Mar 2 19:43:21 CET 2014 (XEN)
>> Latest ChangeSet: Mon Feb 24 12:57:53 2014 +0000 git:5be1e95 (XEN)
>> Bootloader: GRUB 2.00-19ubuntu2.1 (XEN) Command line: placeholder (XEN)
>> Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN)
>> VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc
>> information: (XEN) Found 2 MBR signatures (XEN) Found 2 EDD
>> information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 -
>> 000000000009dc00 (usable) (XEN) 000000000009f800 - 00000000000a0000
>> (reserved) (XEN) 00000000000f0000 - 0000000000100000 (reserved) (XEN)
>> 0000000000100000 - 00000000dfeb0000 (usable) (XEN) 00000000dfeb0000 -
>> 00000000dfee1000 (ACPI NVS) (XEN) 00000000dfee1000 - 00000000dfef0000
>> (ACPI data) (XEN) 00000000dfef0000 - 00000000dff00000 (reserved) (XEN)
>> 00000000f4000000 - 00000000f8000000 (reserved) (XEN) 00000000fec00000 -
>> 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000320000000
>> (usable) (XEN) ACPI: RSDP 000F7660, 0014 (r0 GBT ) (XEN) ACPI: RSDT
>> DFEE1040, 0048 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) (XEN) ACPI:
>> FACP DFEE1100, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) (XEN)
>> ACPI: DSDT DFEE11C0, 4F50 (r1 GBT GBTUACPI 1000 MSFT 100000C)
>> (XEN) ACPI: FACS DFEB0000, 0040 (XEN) ACPI: MSDM DFEE6300, 0055 (r3
> GBT
>> GBTUACPI 42302E31 GBTU 1010101) (XEN) ACPI: HPET DFEE63C0, 0038
> (r1
>> GBT GBTUACPI 42302E31 GBTU 98) (XEN) ACPI: MCFG DFEE6440, 003C (r1
>> GBT GBTUACPI 42302E31 GBTU 1010101) (XEN) ACPI: EUDS DFEE6500, 0470
>> (r1 GBT 0 0) (XEN) ACPI: TAMG DFEE6970, 0B3A (r1
> GBT
>> GBT B0 5455312E BG 53450101) (XEN) ACPI: APIC DFEE6180, 012C (r1
> GBT
>> GBTUACPI 42302E31 GBTU 1010101) (XEN) ACPI: SSDT DFEE74C0, 2FD4
> (r1
>> INTEL PPM RCM 80000001 INTL 20061109) (XEN) ACPI: DMAR DFEEA4C0, 00B0
>> (r1 IntelR AWRDACPI 322E3030 DRWA 2) (XEN) System RAM: 12286MB
>> (12581172kB) (XEN) Domain heap initialised (XEN) Processor #0 7:10 APIC
>> version 21 (XEN) Processor #2 7:10 APIC version 21 (XEN) Processor #4
>> 7:10 APIC version 21 (XEN) Processor #6 7:10 APIC version 21 (XEN)
>> Processor #1 7:10 APIC version 21 (XEN) Processor #3 7:10 APIC version
>> 21 (XEN) Processor #5 7:10 APIC version 21 (XEN) Processor #7 7:10 APIC
>> version 21 (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000,
>> GSI 0-23 (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN)
>> Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2664.876
>> MHz processor. (XEN) Initing memory sharing. (XEN) Intel VT-d iommu 0
>> supported page sizes: 4kB. (XEN) Intel VT-d iommu 1 supported page
>> sizes: 4kB. (XEN) Intel VT-d Snoop Control not enabled. (XEN) Intel
>> VT-d Dom0 DMA Passthrough not enabled. (XEN) Intel VT-d Queued
>> Invalidation enabled. (XEN) Intel VT-d Interrupt Remapping enabled.
>> (XEN) Intel VT-d Shared EPT tables not enabled. (XEN)
>> [VT-D]iommu.c:2069: ioapic_to_iommu: ioapic 0 (id: 0x2) is NULL! Will
>> not try to enable Interrupt Remapping. (XEN) I/O virtualisation enabled
>> (XEN) - Dom0 mode: Relaxed (XEN) Interrupt remapping disabled (XEN)
>> ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) Platform
>> timer is 14.318MHz HPET (XEN) Allocated console ring of 16 KiB. (XEN)
>> VMX: Supported advanced features: (XEN) - APIC MMIO access
>> virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables
>> (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI
>> (XEN) - MSR direct-access bitmap (XEN) HVM: ASIDs enabled. (XEN) HVM:
>> VMX enabled (XEN) HVM: Hardware Assisted Paging (HAP) detected (XEN)
>> HVM: HAP page sizes: 4kB, 2MB (XEN) Brought up 8 CPUs (XEN) *** LOADING
>> DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0
>> kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x23fa000 (XEN) PHYSICAL
>> MEMORY ARRANGEMENT: (XEN) Dom0 alloc.:
>> 000000030c000000->0000000310000000 (3041946 pages to be allocated)
>> (XEN) Init. ramdisk: 000000031d13c000->000000031ffff800 (XEN) VIRTUAL
>> MEMORY ARRANGEMENT: (XEN) Loaded kernel:
>> ffffffff81000000->ffffffff823fa000 (XEN) Init. ramdisk:
>> ffffffff823fa000->ffffffff852bd800 (XEN) Phys-Mach map:
>> ffffffff852be000->ffffffff86a2aaf0 (XEN) Start info:
>> ffffffff86a2b000->ffffffff86a2b4b4 (XEN) Page tables:
>> ffffffff86a2c000->ffffffff86a65000 (XEN) Boot stack:
>> ffffffff86a65000->ffffffff86a66000 (XEN) TOTAL:
>> ffffffff80000000->ffffffff86c00000 (XEN) ENTRY ADDRESS:
>> ffffffff81d341e0 (XEN) Dom0 has maximum 8 VCPUs (XEN) Scrubbing Free
>> RAM: .done. (XEN) Initial low memory virq threshold set at 0x4000
>> pages. (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel:
>> Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing
>> VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times
>> to switch input to Xen) (XEN) Freed 280kB init memory.
>>
>>
>> This is xl info :
>>
>> host : val-host-test release :
>> 3.13.3-with-acs version : #1 SMP Mon Feb 17 23:02:44 CET
>> 2014 machine : x86_64 nr_cpus : 8
>> max_cpu_id : 15 nr_nodes : 1
> cores_per_socket
>> : 4 threads_per_core : 2 cpu_mhz : 2664
>> hw_caps :
>>
> bfebfbff:28100800:00000000:00003b00:0098e3bd:00000000:00000001:00000
> 000
>> virt_caps : hvm hvm_directio total_memory :
>> 12286 free_memory : 128 sharing_freed_memory : 0
>> sharing_used_memory : 0 outstanding_claims : 0 free_cpus
>> : 0 xen_major : 4 xen_minor : 4
> xen_extra
>> : -rc xen_version : 4.4-rc xen_caps
>> : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p
>> hvm-3.0-x86_64 xen_scheduler : credit xen_pagesize :
>> 4096 platform_params : virt_start=0xffff800000000000
>> xen_changeset : Mon Feb 24 12:57:53 2014 +0000 git:5be1e95
>> xen_commandline : placeholder cc_compiler : gcc
>> (Ubuntu/Linaro 4.8.1-10ubuntu9) 4.8.1 cc_compile_by : root
>> cc_compile_domain : cc_compile_date : Sun Mar 2 19:43:21
>> CET 2014 xend_config_format : 4
>>
>>
>> And this is my config file :
>>
>> #kernel = 'hvmloader'
>> builder = 'hvm'
>> # Memory reserved for Windows domU, in this case 4GB (adjust to your
>> needs):
>> memory = 4096
>> # Name of the domU:
>> name = 'Windows-Server-2012-R2'
>> # Most CPUs have 4 cores / 8 threads (=8 vcpus). Check your CPU and
>> change as needed!:
>> vcpus = 1
>> # Only for 32 bit guests - don't use for 64 bit:
>> #pae = 1
>> acpi = 1
>> apic = 1
>> hap = 1
>> nestedhvm = 1
>> cpuid = ['0x1:ecx=0xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx']
>> nx = 1
>> on_xend_stop = 'shutdown'
>> # Here my virtual network interfaces - see /etc/network/interfaces below:
>> vif = [ 'mac=00:16:3e:68:e1:01,bridge=br0,model=e1000' ] # I
>> assigned a static MAC address, else it will be changed each time
>> Windows # boots. The address should start with 00:16:3e., the rest is up
>> to you.
>> # Specifying the disks and Windows ISO for installation, adjust to
>> your
>> needs:
>> disk = [
>> 'file:/home/val/Windows-Server-2012-r2-test-vm-xen.img,hda,w'
>> #,'file:/home/val/Partage/Windows-server-2012-R2-RTM-64
>> bits/fr_windows_server_2012_r2_x64_dvd.iso,hdc:cdrom,r' ] # More
>> disks can be added later using this same method. The path to the #
>> device or a file can be added. After the first comma is how the
>> device will # appear. "hda" is the first, "hdb" the second etc.
>> "hda" will appear as IDE, # sda will appear as SCSI or SATA. After the
>> second comma "r"
>> means read # only and "w" is for write. device_model_version =
>> "qemu-xen-traditional" boot = 'c' # The above should be changed once
>> Windows is installed: boot='c' to only # show the Windows file
>> system, else it may try to boot from the ISO image. sdl = 0 vnc = 1
>> vnclisten = '0.0.0.0' vncpasswd = '' keymap = 'fr' stdvga = 0 #
>> nographic=1 #!!!
>> only uncomment this if you are using win8 or are trying # to get a
>> Nvidia card to work. In my case - Nvidia Quadro 2000 - this was not
>> # needed. serial = 'pty' tsc_mode = "default" viridian = 1 #soundhw
>> = 'all' # This allows sharing the USB mouse/keyboard: usb = 1
>> usbdevice = 'tablet' # gfx_passthru=0 is how it works for most AMD
>> cards and my Quadro 2000 card. # gfx_passthru=1 would pass through
>> the graphics card as primary display adapter. # You can change this
>> later for iGPUs or nVidia if needed. # Try it with 0 first!
>> #gfx_passthru = 0 #Enter the PCI IDs you wish to passthru: #pci = [
>> '02:00.0', '02:00.1' , '00:1a.0'
>> ] # The following lets Windows take the local time from the dom0:
>> localtime = 1 #To turn on pci power management globally, use (see
>> remarks under pci=... below): #pci_power_mgmt = 1
>>
>>
>> Thanks, and sorry for the my bad english, i'm french ^^.
>>
>> Valentin Meriel.
>
>
> Best regards,
> Yang
>
Best regards,
Yang
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2014-03-05 20:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-02 21:48 Bug Xen-4.4.0-RC6 with Hyper-V on Server 2012 R2 Valentin Meriel
2014-03-03 1:12 ` Zhang, Yang Z
2014-03-03 1:31 ` valentin.meriel
2014-03-03 1:54 ` Zhang, Yang Z
2014-03-03 19:51 ` valentin.meriel
2014-03-05 4:32 ` Zhang, Yang Z
2014-03-05 20:59 ` valentin.meriel [this message]
2014-03-03 1:52 ` Pasi Kärkkäinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=A9DF756F6B2E4AE5A5944393D3452454@ValPC \
--to=valentin.meriel@gmail.com \
--cc=xen-devel@lists.xen.org \
--cc=yang.z.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.