From mboxrd@z Thu Jan 1 00:00:00 1970 From: Minkyu Kang Date: Tue, 19 Oct 2010 11:33:19 +0900 Subject: [U-Boot] [PATCH v3] Add generic support for samsung s3c2440 In-Reply-To: <4C768B8B.5000506@diagraph.com> References: <4C727A5D.8080302@diagraph.com> <4C740D0F.7010101@diagraph.com> <4C768B8B.5000506@diagraph.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear C Nauman, I'm sorry to late review. On 27 August 2010 00:43, C Nauman wrote: > This patch adds generic support for the Samsung s3c2440 processor. > > Global s3c24x0 changes to struct members converting from upper case to to > lower case. > > Signed-off-by: Craig Nauman > Cc: kevin.morfitt at fearnside-systems.co.uk > > --- > - v3 Fixup style problems checkpatch.pl yields one error from David's name > - v2 Fix global s3c24x0 struct members to lower case as requested by Minkyu > - v1 Start from patch posted by Kevin Morfitt 2009-06-19 > > arch/arm/cpu/arm920t/s3c24x0/speed.c ? ? ? ? ? ?| ? 31 +- > arch/arm/cpu/arm920t/s3c24x0/timer.c ? ? ? ? ? ?| ? 23 +- > arch/arm/cpu/arm920t/s3c24x0/usb.c ? ? ? ? ? ? ?| ? 10 +- > arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c ? ? ? ? | ? 12 +- > arch/arm/include/asm/arch-s3c24x0/s3c2440.h ? ? | ?163 ++++++ > arch/arm/include/asm/arch-s3c24x0/s3c24x0.h ? ? | ?672 > +++++++++++++---------- > arch/arm/include/asm/arch-s3c24x0/s3c24x0_cpu.h | ? ?2 + > board/mpl/vcma9/vcma9.c ? ? ? ? ? ? ? ? ? ? ? ? | ? 41 +- > board/samsung/smdk2400/smdk2400.c ? ? ? ? ? ? ? | ? 28 +- > board/samsung/smdk2410/smdk2410.c ? ? ? ? ? ? ? | ? 36 +- > board/sbc2410x/sbc2410x.c ? ? ? ? ? ? ? ? ? ? ? | ? 44 +- > board/trab/cmd_trab.c ? ? ? ? ? ? ? ? ? ? ? ? ? | ? 28 +- > board/trab/rs485.c ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? 40 +- > board/trab/trab.c ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? 67 ++-- > board/trab/trab_fkt.c ? ? ? ? ? ? ? ? ? ? ? ? ? | ?142 +++--- > board/trab/tsc2000.c ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? 39 +- > board/trab/tsc2000.h ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? 86 ++-- > board/trab/vfd.c ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? 90 ++-- > drivers/i2c/s3c24x0_i2c.c ? ? ? ? ? ? ? ? ? ? ? | ?102 ++-- > drivers/mtd/nand/s3c2410_nand.c ? ? ? ? ? ? ? ? | ? 25 +- > drivers/rtc/s3c24x0_rtc.c ? ? ? ? ? ? ? ? ? ? ? | ? 52 +- > drivers/serial/serial_s3c24x0.c ? ? ? ? ? ? ? ? | ? 26 +- > 22 files changed, 1019 insertions(+), 740 deletions(-) > create mode 100644 arch/arm/include/asm/arch-s3c24x0/s3c2440.h > > diff --git a/arch/arm/cpu/arm920t/s3c24x0/speed.c > b/arch/arm/cpu/arm920t/s3c24x0/speed.c > index b13283a..c3e40d4 100644 > --- a/arch/arm/cpu/arm920t/s3c24x0/speed.c > +++ b/arch/arm/cpu/arm920t/s3c24x0/speed.c > @@ -54,9 +54,9 @@ static ulong get_PLLCLK(int pllreg) > ? ? ? ?ulong r, m, p, s; > > ? ? ? ?if (pllreg == MPLL) > - ? ? ? ? ? ? ? r = readl(&clk_power->MPLLCON); > + ? ? ? ? ? ? ? r = readl(&clk_power->mpllcon); > ? ? ? ?else if (pllreg == UPLL) > - ? ? ? ? ? ? ? r = readl(&clk_power->UPLLCON); > + ? ? ? ? ? ? ? r = readl(&clk_power->upllcon); > ? ? ? ?else > ? ? ? ? ? ? ? ?hang(); > > @@ -64,7 +64,13 @@ static ulong get_PLLCLK(int pllreg) > ? ? ? ?p = ((r & 0x003F0) >> 4) + 2; > ? ? ? ?s = r & 0x3; > > +#if defined(CONFIG_S3C2440) > + ? ? ? if (pllreg == MPLL) > + ? ? ? ? ? ? ? return 2 * m * (CONFIG_SYS_CLK_FREQ / (p << s)); > + ? ? ? else maybe this else is not necessary > +#endif > ? ? ? ?return (CONFIG_SYS_CLK_FREQ * m) / (p << s); > + > } > > /* return FCLK frequency */ > @@ -77,8 +83,23 @@ ulong get_FCLK(void) > ulong get_HCLK(void) > { > ? ? ? ?struct s3c24x0_clock_power *clk_power = > s3c24x0_get_base_clock_power(); > - > - ? ? ? return (readl(&clk_power->CLKDIVN) & 2) ? get_FCLK() / 2 : > get_FCLK(); > +#ifdef CONFIG_S3C2440 > + ? ? ? switch (readl(&clk_power->clkdivn) & 0x6) { > + ? ? ? default: > + ? ? ? case 0: > + ? ? ? ? ? ? ? return get_FCLK(); > + ? ? ? case 2: > + ? ? ? ? ? ? ? return get_FCLK() / 2; > + ? ? ? case 4: > + ? ? ? ? ? ? ? return (readl(&clk_power->camdivn) & (1 << 9)) ? > + ? ? ? ? ? ? ? ? ? ? ? get_FCLK() / 8 : get_FCLK() / 4; > + ? ? ? case 6: > + ? ? ? ? ? ? ? return (readl(&clk_power->camdivn) & (1 << 8)) ? > + ? ? ? ? ? ? ? ? ? ? ? get_FCLK() / 6 : get_FCLK() / 3; > + ? ? ? } > +#else > + ? ? ? return (readl(&clk_power->clkdivn) & 2) ? get_FCLK() / 2 : > get_FCLK(); > +#endif > } > > /* return PCLK frequency */ > @@ -86,7 +107,7 @@ ulong get_PCLK(void) > { > ? ? ? ?struct s3c24x0_clock_power *clk_power = > s3c24x0_get_base_clock_power(); > > - ? ? ? return (readl(&clk_power->CLKDIVN) & 1) ? get_HCLK() / 2 : > get_HCLK(); > + ? ? ? return (readl(&clk_power->clkdivn) & 1) ? get_HCLK() / 2 : > get_HCLK(); > } > > /* return UCLK frequency */ > diff --git a/arch/arm/cpu/arm920t/s3c24x0/timer.c > b/arch/arm/cpu/arm920t/s3c24x0/timer.c > index 7d47354..1512f12 100644 > --- a/arch/arm/cpu/arm920t/s3c24x0/timer.c > +++ b/arch/arm/cpu/arm920t/s3c24x0/timer.c > @@ -43,7 +43,7 @@ static inline ulong READ_TIMER(void) > { > ? ? ? ?struct s3c24x0_timers *timers = s3c24x0_get_base_timers(); > > - ? ? ? return readl(&timers->TCNTO4) & 0xffff; > + ? ? ? return readl(&timers->tcnto4) & 0xffff; > } > > static ulong timestamp; > @@ -56,7 +56,7 @@ int timer_init(void) > > ? ? ? ?/* use PWM Timer 4 because it has no output */ > ? ? ? ?/* prescaler for Timer 4 is 16 */ > - ? ? ? writel(0x0f00, &timers->TCFG0); > + ? ? ? writel(0x0f00, &timers->tcfg0); > ? ? ? ?if (timer_load_val == 0) { > ? ? ? ? ? ? ? ?/* > ? ? ? ? ? ? ? ? * for 10 ms clock period @ PCLK with 4 bit divider = 1/2 > @@ -68,13 +68,13 @@ int timer_init(void) > ? ? ? ?} > ? ? ? ?/* load value for 10 ms timeout */ > ? ? ? ?lastdec = timer_load_val; > - ? ? ? writel(timer_load_val, &timers->TCNTB4); > - ? ? ? /* auto load, manual update of Timer 4 */ > - ? ? ? tmr = (readl(&timers->TCON) & ~0x0700000) | 0x0600000; > - ? ? ? writel(tmr, &timers->TCON); > - ? ? ? /* auto load, start Timer 4 */ > + ? ? ? writel(timer_load_val, &timers->tcntb4); > + ? ? ? /* auto load, manual update of timer 4 */ > + ? ? ? tmr = (readl(&timers->tcon) & ~0x0700000) | 0x0600000; > + ? ? ? writel(tmr, &timers->tcon); > + ? ? ? /* auto load, start timer 4 */ > ? ? ? ?tmr = (tmr & ~0x0700000) | 0x0500000; > - ? ? ? writel(tmr, &timers->TCON); > + ? ? ? writel(tmr, &timers->tcon); > ? ? ? ?timestamp = 0; > > ? ? ? ?return (0); > @@ -181,6 +181,7 @@ ulong get_tbclk(void) > ? ? ? ?tbclk = timer_load_val * 100; > #elif defined(CONFIG_SBC2410X) || \ > ? ? ?defined(CONFIG_SMDK2410) || \ > + ? ? ?defined(CONFIG_S3C2440) || \ please tab instead of space. > ? ? ?defined(CONFIG_VCMA9) > ? ? ? ?tbclk = CONFIG_SYS_HZ; > #else > @@ -206,13 +207,13 @@ void reset_cpu(ulong ignored) > ? ? ? ?watchdog = s3c24x0_get_base_watchdog(); > > ? ? ? ?/* Disable watchdog */ > - ? ? ? writel(0x0000, &watchdog->WTCON); > + ? ? ? writel(0x0000, &watchdog->wtcon); > > ? ? ? ?/* Initialize watchdog timer count register */ > - ? ? ? writel(0x0001, &watchdog->WTCNT); > + ? ? ? writel(0x0001, &watchdog->wtcnt); > > ? ? ? ?/* Enable watchdog timer; assert reset at timer timeout */ > - ? ? ? writel(0x0021, &watchdog->WTCON); > + ? ? ? writel(0x0021, &watchdog->wtcon); > > ? ? ? ?while (1) > ? ? ? ? ? ? ? ?/* loop forever and wait for reset to happen */; > diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb.c > b/arch/arm/cpu/arm920t/s3c24x0/usb.c > index e468ed0..226a3f6 100644 > --- a/arch/arm/cpu/arm920t/s3c24x0/usb.c > +++ b/arch/arm/cpu/arm920t/s3c24x0/usb.c > @@ -39,14 +39,14 @@ int usb_cpu_init(void) > ? ? ? ? * Set the 48 MHz UPLL clocking. Values are taken from > ? ? ? ? * "PLL value selection guide", 6-23, s3c2400_UM.pdf. > ? ? ? ? */ > - ? ? ? writel((40 << 12) + (1 << 4) + 2, &clk_power->UPLLCON); > + ? ? ? writel((40 << 12) + (1 << 4) + 2, &clk_power->upllcon); > ? ? ? ?/* 1 = use pads related USB for USB host */ > - ? ? ? writel(readl(&gpio->MISCCR) | 0x8, &gpio->MISCCR); > + ? ? ? writel(readl(&gpio->misccr) | 0x8, &gpio->misccr); > > ? ? ? ?/* > ? ? ? ? * Enable USB host clock. > ? ? ? ? */ > - ? ? ? writel(readl(&clk_power->CLKCON) | (1 << 4), &clk_power->CLKCON); > + ? ? ? writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon); > > ? ? ? ?return 0; > } > @@ -55,14 +55,14 @@ int usb_cpu_stop(void) > { > ? ? ? ?struct s3c24x0_clock_power *clk_power = > s3c24x0_get_base_clock_power(); > ? ? ? ?/* may not want to do this */ > - ? ? ? writel(readl(&clk_power->CLKCON) & ~(1 << 4), &clk_power->CLKCON); > + ? ? ? writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon); > ? ? ? ?return 0; > } > > int usb_cpu_init_fail(void) > { > ? ? ? ?struct s3c24x0_clock_power *clk_power = > s3c24x0_get_base_clock_power(); > - ? ? ? writel(readl(&clk_power->CLKCON) & ~(1 << 4), &clk_power->CLKCON); > + ? ? ? writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon); > ? ? ? ?return 0; > } > > diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c > b/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c > index 5aa8d64..ccc9738 100644 > --- a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c > +++ b/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c > @@ -1666,13 +1666,13 @@ int usb_lowlevel_init(void) > ? ? ? ? * Set the 48 MHz UPLL clocking. Values are taken from > ? ? ? ? * "PLL value selection guide", 6-23, s3c2400_UM.pdf. > ? ? ? ? */ > - ? ? ? clk_power->UPLLCON = ((40 << 12) + (1 << 4) + 2); > - ? ? ? gpio->MISCCR |= 0x8; ? ?/* 1 = use pads related USB for USB host */ > + ? ? ? clk_power->upllcon = ((40 << 12) + (1 << 4) + 2); > + ? ? ? gpio->misccr |= 0x8; ? ?/* 1 = use pads related USB for USB host */ > > ? ? ? ?/* > ? ? ? ? * Enable USB host clock. > ? ? ? ? */ > - ? ? ? clk_power->CLKCON |= (1 << 4); > + ? ? ? clk_power->clkcon |= (1 << 4); > > ? ? ? ?memset(&gohci, 0, sizeof(struct ohci)); > ? ? ? ?memset(&urb_priv, 0, sizeof(struct urb_priv)); > @@ -1709,7 +1709,7 @@ int usb_lowlevel_init(void) > ? ? ? ?if (hc_reset(&gohci) < 0) { > ? ? ? ? ? ? ? ?hc_release_ohci(&gohci); > ? ? ? ? ? ? ? ?/* Initialization failed */ > - ? ? ? ? ? ? ? clk_power->CLKCON &= ~(1 << 4); > + ? ? ? ? ? ? ? clk_power->clkcon &= ~(1 << 4); > ? ? ? ? ? ? ? ?return -1; > ? ? ? ?} > > @@ -1722,7 +1722,7 @@ int usb_lowlevel_init(void) > ? ? ? ? ? ? ? ?err("can't start usb-%s", gohci.slot_name); > ? ? ? ? ? ? ? ?hc_release_ohci(&gohci); > ? ? ? ? ? ? ? ?/* Initialization failed */ > - ? ? ? ? ? ? ? clk_power->CLKCON &= ~(1 << 4); > + ? ? ? ? ? ? ? clk_power->clkcon &= ~(1 << 4); > ? ? ? ? ? ? ? ?return -1; > ? ? ? ?} > #ifdef ?DEBUG > @@ -1748,7 +1748,7 @@ int usb_lowlevel_stop(void) > ? ? ? ?/* call hc_release_ohci() here ? */ > ? ? ? ?hc_reset(&gohci); > ? ? ? ?/* may not want to do this */ > - ? ? ? clk_power->CLKCON &= ~(1 << 4); > + ? ? ? clk_power->clkcon &= ~(1 << 4); > ? ? ? ?return 0; > } > > diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c2440.h > b/arch/arm/include/asm/arch-s3c24x0/s3c2440.h > new file mode 100644 > index 0000000..7e4518e > --- /dev/null > +++ b/arch/arm/include/asm/arch-s3c24x0/s3c2440.h > @@ -0,0 +1,163 @@ > +/* > + * (C) Copyright 2003 > + * David M?ller ELSOFT AG Switzerland. d.mueller at elsoft.ch > + * > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > + * MA 02111-1307 USA > + */ > + > +/************************************************ > + * NAME ? ? ? ? ? ?: s3c2440.h > + * Version ?: 31.3.2003 > + * > + * Based on S3C2440 User's manual Rev x.x > + ************************************************/ > + > +#ifndef __S3C2440_H__ > +#define __S3C2440_H__ > + > +#define S3C24X0_UART_CHANNELS ?3 > +#define S3C24X0_SPI_CHANNELS ? 2 > + > +/* S3C2440 only supports 512 Byte HW ECC */ > +#define S3C2440_ECCSIZE ? ? ? ? ? ? ? ?512 > +#define S3C2440_ECCBYTES ? ? ? 3 > + > +enum s3c24x0_uarts_nr { > + ? ? ? S3C24X0_UART0, > + ? ? ? S3C24X0_UART1, > + ? ? ? S3C24X0_UART2 > +}; > + > +/* S3C2440 device base addresses */ > +#define S3C24X0_MEMCTL_BASE ? ? ? ? ? ?0x48000000 > +#define S3C24X0_USB_HOST_BASE ? ? ? ? ?0x49000000 > +#define S3C24X0_INTERRUPT_BASE ? ? ? ? 0x4A000000 > +#define S3C24X0_DMA_BASE ? ? ? ? ? ? ? 0x4B000000 > +#define S3C24X0_CLOCK_POWER_BASE ? ? ? 0x4C000000 > +#define S3C24X0_LCD_BASE ? ? ? ? ? ? ? 0x4D000000 > +#define S3C2440_NAND_BASE ? ? ? ? ? ? ?0x4E000000 > +#define S3C24X0_UART_BASE ? ? ? ? ? ? ?0x50000000 > +#define S3C24X0_TIMER_BASE ? ? ? ? ? ? 0x51000000 > +#define S3C24X0_USB_DEVICE_BASE ? ? ? ? ? ? ? ?0x52000140 > +#define S3C24X0_WATCHDOG_BASE ? ? ? ? ?0x53000000 > +#define S3C24X0_I2C_BASE ? ? ? ? ? ? ? 0x54000000 > +#define S3C24X0_I2S_BASE ? ? ? ? ? ? ? 0x55000000 > +#define S3C24X0_GPIO_BASE ? ? ? ? ? ? ?0x56000000 > +#define S3C24X0_RTC_BASE ? ? ? ? ? ? ? 0x57000000 > +#define S3C2440_ADC_BASE ? ? ? ? ? ? ? 0x58000000 > +#define S3C24X0_SPI_BASE ? ? ? ? ? ? ? 0x59000000 > +#define S3C2440_SDI_BASE ? ? ? ? ? ? ? 0x5A000000 > + > + please remove this space > +/* include common stuff */ > +#include > + > + Ditto. > +static inline struct s3c24x0_memctl *s3c24x0_get_base_memctl(void) > +{ > + ? ? ? return (struct s3c24x0_memctl *)S3C24X0_MEMCTL_BASE; > +} > + > +static inline struct s3c24x0_usb_host *s3c24x0_get_base_usb_host(void) > +{ > + ? ? ? return (struct s3c24x0_usb_host *)S3C24X0_USB_HOST_BASE; > +} > + > +static inline struct s3c24x0_interrupt *s3c24x0_get_base_interrupt(void) > +{ > + ? ? ? return (struct s3c24x0_interrupt *)S3C24X0_INTERRUPT_BASE; > +} > + > +static inline struct s3c24x0_dmas *s3c24x0_get_base_dmas(void) > +{ > + ? ? ? return (struct s3c24x0_dmas *)S3C24X0_DMA_BASE; > +} > + > +static inline struct s3c24x0_clock_power > *s3c24x0_get_base_clock_power(void) > +{ > + ? ? ? return (struct s3c24x0_clock_power *)S3C24X0_CLOCK_POWER_BASE; > +} > + > +static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void) > +{ > + ? ? ? return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE; > +} > + > +static inline struct s3c2440_nand *s3c2440_get_base_nand(void) > +{ > + ? ? ? return (struct s3c2440_nand *)S3C2440_NAND_BASE; > +} > + > +static inline struct s3c24x0_uart > + ? ? ? *s3c24x0_get_base_uart(enum s3c24x0_uarts_nr n) > +{ > + ? ? ? return (struct s3c24x0_uart *)(S3C24X0_UART_BASE + (n * 0x4000)); > +} > + > +static inline struct s3c24x0_timers *s3c24x0_get_base_timers(void) > +{ > + ? ? ? return (struct s3c24x0_timers *)S3C24X0_TIMER_BASE; > +} > + > +static inline struct s3c24x0_usb_device *s3c24x0_get_base_usb_device(void) > +{ > + ? ? ? return (struct s3c24x0_usb_device *)S3C24X0_USB_DEVICE_BASE; > +} > + > +static inline struct s3c24x0_watchdog *s3c24x0_get_base_watchdog(void) > +{ > + ? ? ? return (struct s3c24x0_watchdog *)S3C24X0_WATCHDOG_BASE; > +} > + > +static inline struct s3c24x0_i2c *s3c24x0_get_base_i2c(void) > +{ > + ? ? ? return (struct s3c24x0_i2c *)S3C24X0_I2C_BASE; > +} > + > +static inline struct s3c24x0_i2s *s3c24x0_get_base_i2s(void) > +{ > + ? ? ? return (struct s3c24x0_i2s *)S3C24X0_I2S_BASE; > +} > + > +static inline struct s3c24x0_gpio *s3c24x0_get_base_gpio(void) > +{ > + ? ? ? return (struct s3c24x0_gpio *)S3C24X0_GPIO_BASE; > +} > + > +static inline struct s3c24x0_rtc *s3c24x0_get_base_rtc(void) > +{ > + ? ? ? return (struct s3c24x0_rtc *)S3C24X0_RTC_BASE; > +} > + > +static inline struct s3c2440_adc *s3c2440_get_base_adc(void) > +{ > + ? ? ? return (struct s3c2440_adc *)S3C2440_ADC_BASE; > +} > + > +static inline struct s3c24x0_spi *s3c24x0_get_base_spi(void) > +{ > + ? ? ? return (struct s3c24x0_spi *)S3C24X0_SPI_BASE; > +} > + > +static inline struct s3c2440_sdi *s3c2440_get_base_sdi(void) > +{ > + ? ? ? return (struct s3c2440_sdi *)S3C2440_SDI_BASE; > +} > + > +#endif /*__S3C2440_H__*/ > diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h > b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h > index 15f53dd..f634d11 100644 > --- a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h > +++ b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h > @@ -33,12 +33,12 @@ > > /* Memory controller (see manual chapter 5) */ > struct s3c24x0_memctl { > - ? ? ? u32 ? ? BWSCON; > - ? ? ? u32 ? ? BANKCON[8]; > - ? ? ? u32 ? ? REFRESH; > - ? ? ? u32 ? ? BANKSIZE; > - ? ? ? u32 ? ? MRSRB6; > - ? ? ? u32 ? ? MRSRB7; > + ? ? ? u32 ? ? bwscon; > + ? ? ? u32 ? ? bankcon[8]; > + ? ? ? u32 ? ? refresh; > + ? ? ? u32 ? ? banksize; > + ? ? ? u32 ? ? mrsrb6; > + ? ? ? u32 ? ? mrsrb7; > }; > > Thanks Minkyu Kang -- from. prom. www.promsoft.net