From mboxrd@z Thu Jan 1 00:00:00 1970 From: vender007@gmail.com (vinit agrawal) Date: Thu, 6 Jan 2011 21:18:17 +0530 Subject: ARM Cross Compilation Toolchain on x86 machine In-Reply-To: References: Message-ID: To: kernelnewbies@lists.kernelnewbies.org List-Id: kernelnewbies.lists.kernelnewbies.org try this... its a different toolchain based on GCC http://www.codesourcery.com/sgpp/lite/arm --Vinit On Thu, Jan 6, 2011 at 9:08 PM, Madhavi Manchala wrote: > Dear All, > > We are unable to build the ARM cross compilation tools for > arm-elf-gcc-3.4.3 on my x86 machine on which we installed the Ubuntu > 9.10 distribution OS with 2.6.35 kernel version. The gcc version on > x86 machine is 4.3.3. We need to compile some sources on my x86 > machine for our target machine which is based on ARM architecture. We > have gone through following links to build the cross compilation tools > for arm-elf-gcc 3.4.3 on my x86 machine. > > http://www.ailis.de/~k/archives/19-ARM-cross-compiling-howto.html > http://www.kegel.com/crosstool/current/doc/crosstool-howto.html > http://www.kegel.com/crosstool/ > > Unfortunately we end up with different types of errors. When we fix > one error then we get another new error. We tried in different ways to > build the tools on my x86 machine. There is no luck at all. We also > gone through the http://www.gnuarm.com/ site and downloaded the > binaries for gcc 3.4. toolchain. However, we did not find any README > for how to use these binaries. > > Please let us know if there is any clean procedure/document/link for > building/using the arm-elf-gcc 3.4.3 toolchain on my x86 machine. > > Any help would be greatly appreciated and help us a lot. > > Thanks and Regards, > Madhavi M. > > _______________________________________________ > Kernelnewbies mailing list > Kernelnewbies at kernelnewbies.org > http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20110106/4d5cca95/attachment.html