From mboxrd@z Thu Jan  1 00:00:00 1970
From: Madhavi Manchala <madhavi.linux@gmail.com>
Date: Sun, 13 Feb 2011 19:00:58 +0530
Subject: [U-Boot] Is it possible to load the uboot.bin file to RAM area
 instead FLASH?
In-Reply-To: <20110211165703.9F05A1519FD@gemini.denx.de>
References: <AANLkTi=kp2jWpn7FtCLraYKGYAbQq9NGn8yaiO=PFBfU@mail.gmail.com>
	<AANLkTin7zsxVqjKp1Htovf44mtfkNsJR2DF9bSBkTBFR@mail.gmail.com>
	<20110211165703.9F05A1519FD@gemini.denx.de>
Message-ID: <AANLkTik9egsKQisN=vGe+0nCoxodLn0p=_42inzub-+R@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Fri, Feb 11, 2011 at 10:27 PM, Wolfgang Denk <wd@denx.de> wrote:
> Dear Lei Wen,
>
> In message <AANLkTin7zsxVqjKp1Htovf44mtfkNsJR2DF9bSBkTBFR@mail.gmail.com> you wrote:
>>
>> If your sdram is large enough, or the uboot code is small enough, you don't need
>> the dram init. But begin at the TEXT_BASE still is a must.
>
> Hugh? ?You _always_ must make sure the RAM has been initialized first.
>
> Best regards,
>
> Wolfgang Denk

Dear Wolfgang Denk and Lei,

Thanks for your information.

I build one u-boot.bin file for smdk2410 configuration. However, when
I try to load through JTAG, I am seeing the following error.

invalid download offset u-boot.bin

Am I doing any thing wrong? I set RAM BASE address as 0x00000000 in
the confiuration file as our board RAM starts from there only. Shall I
need to modify any thing in the config file?

Thanks in advance.

Regards,
Madhavi M.