From: Mark Knecht <markknecht@gmail.com>
To: Tejun Heo <tj@kernel.org>
Cc: Linux Kernel List <linux-kernel@vger.kernel.org>,
"linux-ide@vger.kernel.org" <linux-ide@vger.kernel.org>
Subject: Re: Drives missing at boot
Date: Tue, 6 Jul 2010 11:13:31 -0700 [thread overview]
Message-ID: <AANLkTikehTO1j6Gd7Y_g32_P6Yg9KB8Z8qwbNJh10aOU@mail.gmail.com> (raw)
In-Reply-To: <4C32CE50.6010501@kernel.org>
[-- Attachment #1: Type: text/plain, Size: 1289 bytes --]
On Mon, Jul 5, 2010 at 11:33 PM, Tejun Heo <tj@kernel.org> wrote:
> Hello,
>
> On 07/05/2010 06:56 PM, Mark Knecht wrote:
>>>>> dmesg output preferably with printk timestamp enabled.
>>>
>>> Can you please apply the attached patch, reproduce the problem and
>>> post the kernel log?
>>
>> I'm sorry. What am I patching? I'm not a kernel developer - not even a
>> programmer - so I'll need some help with this. What's the command I
<SNIP>
>
> Hmm...
>
> $ cd /usr/src/linux && patch -p1 < PATCH_FILE
>
> should do it. You know how to build and install the compiled kernel,
> right?
>
> Thanks.
>
> --
> tejun
>
OK - thanks. The patch seemed to install correctly. I then did
make clean
make && make modules_install
and then a Gentoo command:
modules-rebuild -X rebuild
to pick up any package modules that need to be rebuild when I use a
new kernel. (X drivers, vmware, etc.)
The kernel boots fine:
mark@c2stable ~ $ uname -a
Linux c2stable 2.6.34-gentoo-r1 #4 SMP PREEMPT Tue Jul 6 10:35:15 PDT
2010 x86_64 Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz GenuineIntel
GNU/Linux
mark@c2stable ~ $
I don't know what I'm looking for in the dmesg files but I do see one
message about a SATA Link being down.
Files attached.
Cheers,
Mark
[-- Attachment #2: dmesg.IDEAllDrives --]
[-- Type: application/octet-stream, Size: 62356 bytes --]
[ 0.000000] Linux version 2.6.34-gentoo-r1 (root@c2stable) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #4 SMP PREEMPT Tue Jul 6 10:35:15 PDT 2010
[ 0.000000] Command line: root=/dev/md5
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask F00000000 write-back
[ 0.000000] 2 base 300000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf780000 page 4k
[ 0.000000] kernel direct mapping tables up to bf780000 @ 12000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[ 0.000000] 0100000000 - 0340000000 page 1G
[ 0.000000] kernel direct mapping tables up to 340000000 @ 14000-15000
[ 0.000000] ACPI: RSDP 00000000000fb0c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bf780000 00040 (v01 012810 RSDT1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780200 00084 (v01 012810 FACP1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 0D2BA (v01 A1088 A1088000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 00040
[ 0.000000] ACPI: APIC 00000000bf780390 000D8 (v01 012810 APIC1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 0003C (v01 012810 OEMMCFG 20100128 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 00072 (v01 012810 OEMB1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 00038 (v01 012810 OEMHPET 20100128 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 000B0 (v01 012810 OEMOSFR 20100128 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79ba40 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea000b5fffff] PMD -> [ffff880002000000-ffff88000c7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00340000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf780
[ 0.000000] 0: 0x00100000 -> 0x00340000
[ 0.000000] On node 0 totalpages: 3143439
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765880 pages, LIFO batch:31
[ 0.000000] Normal zone: 32256 pages used for memmap
[ 0.000000] Normal zone: 2327040 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 12
[ 0.000000] SMP: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] early_res array is doubled to 64 at [14000 - 147ff]
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001800000 s75176 r8192 d23128 u131072
[ 0.000000] pcpu-alloc: s75176 r8192 d23128 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096847
[ 0.000000] Kernel command line: root=/dev/md5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] early_res array is doubled to 128 at [14800 - 157ff]
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (60 early reservations)
[ 0.000000] #1 [0001000000 - 0001771144] TEXT DATA BSS
[ 0.000000] #2 [0001772000 - 0001772298] BRK
[ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #5 [000009fc00 - 00000f1310] BIOS reserved
[ 0.000000] #6 [00000f14fc - 00000ff780] BIOS reserved
[ 0.000000] #7 [00000f1310 - 00000f14fc] MP-table mpc
[ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #9 [0000012000 - 0000014000] PGTABLE
[ 0.000000] #10 [00017722c0 - 00017732c0] BOOTMEM
[ 0.000000] #11 [0001771180 - 0001771780] BOOTMEM
[ 0.000000] #12 [0001f74000 - 0001f75000] BOOTMEM
[ 0.000000] #13 [0001f75000 - 0001f76000] BOOTMEM
[ 0.000000] #14 [0002000000 - 000c800000] MEMMAP 0
[ 0.000000] #15 [0001771780 - 0001771900] BOOTMEM
[ 0.000000] #16 [00017732c0 - 000178b2c0] BOOTMEM
[ 0.000000] #17 [000178b2c0 - 00017a32c0] BOOTMEM
[ 0.000000] #18 [00017a4000 - 00017a5000] BOOTMEM
[ 0.000000] #19 [0001771900 - 0001771941] BOOTMEM
[ 0.000000] #20 [0001771980 - 0001771a06] BOOTMEM
[ 0.000000] #21 [0001771a40 - 0001771ca8] BOOTMEM
[ 0.000000] #22 [0001771cc0 - 0001771d28] BOOTMEM
[ 0.000000] #23 [0001771d40 - 0001771da8] BOOTMEM
[ 0.000000] #24 [0001771dc0 - 0001771e28] BOOTMEM
[ 0.000000] #25 [0001771e40 - 0001771ea8] BOOTMEM
[ 0.000000] #26 [0001771ec0 - 0001771f28] BOOTMEM
[ 0.000000] #27 [0001771f40 - 0001771fa8] BOOTMEM
[ 0.000000] #28 [00017a32c0 - 00017a3328] BOOTMEM
[ 0.000000] #29 [00017a3340 - 00017a33a8] BOOTMEM
[ 0.000000] #30 [00017a33c0 - 00017a3428] BOOTMEM
[ 0.000000] #31 [00017a3440 - 00017a34a8] BOOTMEM
[ 0.000000] #32 [0001771fc0 - 0001771fce] BOOTMEM
[ 0.000000] #33 [00017a34c0 - 00017a34ce] BOOTMEM
[ 0.000000] #34 [0001800000 - 000181a000] BOOTMEM
[ 0.000000] #35 [0001820000 - 000183a000] BOOTMEM
[ 0.000000] #36 [0001840000 - 000185a000] BOOTMEM
[ 0.000000] #37 [0001860000 - 000187a000] BOOTMEM
[ 0.000000] #38 [0001880000 - 000189a000] BOOTMEM
[ 0.000000] #39 [00018a0000 - 00018ba000] BOOTMEM
[ 0.000000] #40 [00018c0000 - 00018da000] BOOTMEM
[ 0.000000] #41 [00018e0000 - 00018fa000] BOOTMEM
[ 0.000000] #42 [0001900000 - 000191a000] BOOTMEM
[ 0.000000] #43 [0001920000 - 000193a000] BOOTMEM
[ 0.000000] #44 [0001940000 - 000195a000] BOOTMEM
[ 0.000000] #45 [0001960000 - 000197a000] BOOTMEM
[ 0.000000] #46 [00017a3500 - 00017a3508] BOOTMEM
[ 0.000000] #47 [00017a3540 - 00017a3548] BOOTMEM
[ 0.000000] #48 [00017a3580 - 00017a35b0] BOOTMEM
[ 0.000000] #49 [00017a35c0 - 00017a3620] BOOTMEM
[ 0.000000] #50 [00017a3640 - 00017a3750] BOOTMEM
[ 0.000000] #51 [00017a3780 - 00017a37c8] BOOTMEM
[ 0.000000] #52 [00017a3800 - 00017a3848] BOOTMEM
[ 0.000000] #53 [00017a5000 - 00017ad000] BOOTMEM
[ 0.000000] #54 [000c800000 - 000d800000] BOOTMEM
[ 0.000000] #55 [000d800000 - 000e000000] BOOTMEM
[ 0.000000] #56 [000e000000 - 0012000000] BOOTMEM
[ 0.000000] #57 [00017ad000 - 00017cd000] BOOTMEM
[ 0.000000] #58 [000197a000 - 00019ba000] BOOTMEM
[ 0.000000] #59 [0000015800 - 000001d800] BOOTMEM
[ 0.000000] Memory: 12302060k/13631488k available (3630k kernel code, 1057732k absent, 271696k reserved, 2958k data, 476k init)
[ 0.000000] Experimental preemptable hierarchical RCU implementation.
[ 0.000000] NR_IRQS:640
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 3337.796 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6675.59 BogoMIPS (lpj=3337796)
[ 0.000292] Security Framework initialized
[ 0.000430] Mount-cache hash table entries: 256
[ 0.000636] CPU: Physical Processor ID: 0
[ 0.000760] CPU: Processor Core ID: 0
[ 0.000886] mce: CPU supports 9 MCE banks
[ 0.001020] CPU0: Thermal monitoring enabled (TM1)
[ 0.001152] using mwait in idle threads.
[ 0.001283] Performance Events: Westmere events, Intel PMU driver.
[ 0.001463] ... version: 3
[ 0.001586] ... bit width: 48
[ 0.001710] ... generic registers: 4
[ 0.001833] ... value mask: 0000ffffffffffff
[ 0.001960] ... max period: 000000007fffffff
[ 0.002085] ... fixed-purpose events: 3
[ 0.002215] ... event mask: 000000070000000f
[ 0.002361] Freeing SMP alternatives: 36k freed
[ 0.002490] ACPI: Core revision 20100121
[ 0.041854] Setting APIC routing to physical flat
[ 0.042420] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052523] CPU0: Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz stepping 02
[ 0.157790] APIC calibration not consistent with PM-Timer: 103ms instead of 100ms
[ 0.158015] APIC delta adjusted to PM-Timer: 834372 (867738)
[ 0.164141] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 Ok.
[ 1.201382] Brought up 12 CPUs
[ 1.201505] Total of 12 processors activated (81028.69 BogoMIPS).
[ 1.208015] NET: Registered protocol family 16
[ 1.208285] ACPI: bus type pci registered
[ 1.208468] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.208691] PCI: not using MMCONFIG
[ 1.208813] PCI: Using configuration type 1 for base access
[ 1.210823] bio: create slab <bio-0> at 0
[ 1.212149] ACPI: EC: Look up EC in DSDT
[ 1.213277] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.293487] ACPI: SSDT 00000000bf7980c0 03978 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.294317] ACPI: Interpreter enabled
[ 1.294440] ACPI: (supports S0 S5)
[ 1.294616] ACPI: Using IOAPIC for interrupt routing
[ 1.294780] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.296574] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.321262] ACPI: No dock devices found.
[ 1.321386] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.321714] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.322057] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.322185] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.322313] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.322532] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 1.322753] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 1.322974] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 1.323237] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.323239] pci 0000:00:00.0: PME# disabled
[ 1.323281] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.323283] pci 0000:00:01.0: PME# disabled
[ 1.323326] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.323328] pci 0000:00:03.0: PME# disabled
[ 1.323371] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.323373] pci 0000:00:07.0: PME# disabled
[ 1.323541] pci 0000:00:1a.0: reg 20: [io 0x9800-0x981f]
[ 1.323594] pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
[ 1.323646] pci 0000:00:1a.2: reg 20: [io 0x9c00-0x9c1f]
[ 1.323697] pci 0000:00:1a.7: reg 10: [mem 0xfb9ff000-0xfb9ff3ff]
[ 1.323743] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.323746] pci 0000:00:1a.7: PME# disabled
[ 1.323773] pci 0000:00:1b.0: reg 10: [mem 0xfb9f8000-0xfb9fbfff 64bit]
[ 1.323806] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.323808] pci 0000:00:1b.0: PME# disabled
[ 1.323859] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.323862] pci 0000:00:1c.0: PME# disabled
[ 1.323915] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.323917] pci 0000:00:1c.2: PME# disabled
[ 1.323971] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.323973] pci 0000:00:1c.4: PME# disabled
[ 1.324027] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.324030] pci 0000:00:1c.5: PME# disabled
[ 1.324069] pci 0000:00:1d.0: reg 20: [io 0x9080-0x909f]
[ 1.324122] pci 0000:00:1d.1: reg 20: [io 0x9400-0x941f]
[ 1.324174] pci 0000:00:1d.2: reg 20: [io 0x9480-0x949f]
[ 1.324226] pci 0000:00:1d.7: reg 10: [mem 0xfb9fe000-0xfb9fe3ff]
[ 1.324271] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.324274] pci 0000:00:1d.7: PME# disabled
[ 1.324368] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 1.324590] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 1.324720] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 1.324979] pci 0000:00:1f.2: reg 10: [io 0x8000-0x8007]
[ 1.324983] pci 0000:00:1f.2: reg 14: [io 0x7c00-0x7c03]
[ 1.324989] pci 0000:00:1f.2: reg 18: [io 0x7880-0x7887]
[ 1.324993] pci 0000:00:1f.2: reg 1c: [io 0x7800-0x7803]
[ 1.324997] pci 0000:00:1f.2: reg 20: [io 0x7480-0x748f]
[ 1.325001] pci 0000:00:1f.2: reg 24: [io 0x7400-0x740f]
[ 1.325037] pci 0000:00:1f.3: reg 10: [mem 0xfb9fd000-0xfb9fd0ff 64bit]
[ 1.325047] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 1.325077] pci 0000:00:1f.5: reg 10: [io 0x9000-0x9007]
[ 1.325081] pci 0000:00:1f.5: reg 14: [io 0x8c00-0x8c03]
[ 1.325085] pci 0000:00:1f.5: reg 18: [io 0x8880-0x8887]
[ 1.325089] pci 0000:00:1f.5: reg 1c: [io 0x8800-0x8803]
[ 1.325093] pci 0000:00:1f.5: reg 20: [io 0x8480-0x848f]
[ 1.325097] pci 0000:00:1f.5: reg 24: [io 0x8400-0x840f]
[ 1.325147] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.325273] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.325275] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.325279] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.325306] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.325431] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.325434] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.325437] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.325478] pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.325485] pci 0000:03:00.0: reg 18: [mem 0xfbac0000-0xfbadffff 64bit]
[ 1.325489] pci 0000:03:00.0: reg 20: [io 0xa000-0xa0ff]
[ 1.325495] pci 0000:03:00.0: reg 30: [mem 0xfbaa0000-0xfbabffff pref]
[ 1.325509] pci 0000:03:00.0: supports D1 D2
[ 1.325531] pci 0000:03:00.1: reg 10: [mem 0xfbafc000-0xfbafffff 64bit]
[ 1.325558] pci 0000:03:00.1: supports D1 D2
[ 1.325568] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.325694] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.325697] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.325700] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.325732] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.325858] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.325861] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.325865] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.325932] pci 0000:06:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[ 1.325938] pci 0000:06:00.0: reg 18: [io 0xd800-0xd8ff]
[ 1.325961] pci 0000:06:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[ 1.325997] pci 0000:06:00.0: supports D1 D2
[ 1.325998] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.326002] pci 0000:06:00.0: PME# disabled
[ 1.326011] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.326138] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.326140] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.326145] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.326242] pci 0000:05:00.0: reg 24: [mem 0xfbcfe000-0xfbcfffff]
[ 1.326276] pci 0000:05:00.0: PME# supported from D3hot
[ 1.326280] pci 0000:05:00.0: PME# disabled
[ 1.326319] pci 0000:05:00.1: reg 10: [io 0xcc00-0xcc07]
[ 1.326327] pci 0000:05:00.1: reg 14: [io 0xc880-0xc883]
[ 1.326334] pci 0000:05:00.1: reg 18: [io 0xc800-0xc807]
[ 1.326342] pci 0000:05:00.1: reg 1c: [io 0xc480-0xc483]
[ 1.326349] pci 0000:05:00.1: reg 20: [io 0xc400-0xc40f]
[ 1.326401] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.326528] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.326531] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.326535] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.326599] pci 0000:04:00.0: reg 10: [mem 0xfbbfc000-0xfbbfffff 64bit]
[ 1.326606] pci 0000:04:00.0: reg 18: [io 0xb800-0xb8ff]
[ 1.326628] pci 0000:04:00.0: reg 30: [mem 0xfbbc0000-0xfbbdffff pref]
[ 1.326663] pci 0000:04:00.0: supports D1 D2
[ 1.326664] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.326668] pci 0000:04:00.0: PME# disabled
[ 1.326677] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.326803] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.326806] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.326810] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.326848] pci 0000:08:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff]
[ 1.326854] pci 0000:08:02.0: reg 14: [io 0xec00-0xec7f]
[ 1.326890] pci 0000:08:02.0: supports D2
[ 1.326891] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
[ 1.326894] pci 0000:08:02.0: PME# disabled
[ 1.326930] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 1.327062] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.327064] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.327068] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.327070] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.327071] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.327073] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.327074] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 1.327076] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 1.327077] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 1.327101] pci_bus 0000:00: on NUMA node 0
[ 1.327105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.327335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.327410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 1.327455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 1.327500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 1.327552] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 1.327594] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 1.327636] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 1.327678] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 1.348051] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 1.348534] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 1.348816] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 1.349301] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 1.349782] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 1.350267] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 1.350748] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 1.351232] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 1.351807] SCSI subsystem initialized
[ 1.352042] libata version 3.00 loaded.
[ 1.352126] usbcore: registered new interface driver usbfs
[ 1.352269] usbcore: registered new interface driver hub
[ 1.352416] usbcore: registered new device driver usb
[ 1.352648] PCI: Using ACPI for IRQ routing
[ 1.352772] PCI: pci_cache_line_size set to 64 bytes
[ 1.352854] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 1.352856] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff
[ 1.352927] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.353176] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.360163] Switching to clocksource tsc
[ 1.360711] pnp: PnP ACPI init
[ 1.360836] ACPI: bus type pnp registered
[ 1.363424] pnp: PnP ACPI: found 17 devices
[ 1.363547] ACPI: ACPI bus type pnp unregistered
[ 1.363677] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 1.363803] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 1.363933] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 1.364060] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 1.364187] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 1.364314] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
[ 1.364444] system 00:07: [io 0x0290-0x029f] has been reserved
[ 1.364571] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.364697] system 00:08: [io 0x0800-0x087f] has been reserved
[ 1.364822] system 00:08: [io 0x0500-0x057f] could not be reserved
[ 1.364951] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.365078] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.365204] system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 1.365333] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
[ 1.365461] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.365589] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.365717] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.365846] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.365975] system 00:10: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.366102] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.366229] system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
[ 1.366356] system 00:10: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.371346] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc03fffff]
[ 1.371474] pci 0000:00:1c.2: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.371693] pci 0000:00:1c.4: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.371915] pci 0000:00:1c.5: BAR 9: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.372135] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 1.372261] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.372385] pci 0000:00:01.0: bridge window [io disabled]
[ 1.372512] pci 0000:00:01.0: bridge window [mem disabled]
[ 1.372637] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 1.372765] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.372889] pci 0000:00:03.0: bridge window [io disabled]
[ 1.373017] pci 0000:00:03.0: bridge window [mem disabled]
[ 1.373143] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 1.373271] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.373396] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.373523] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.373651] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.373872] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.373999] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.374127] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 1.374255] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.374477] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.374602] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.374729] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.374858] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.375082] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.375207] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.375334] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.375462] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.375684] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.375809] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.375939] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.376067] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.376290] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 1.376414] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.376542] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.376670] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.376804] pci 0000:00:01.0: setting latency timer to 64
[ 1.376809] pci 0000:00:03.0: setting latency timer to 64
[ 1.376814] pci 0000:00:07.0: setting latency timer to 64
[ 1.376819] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 1.376951] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.377079] pci 0000:00:1c.0: setting latency timer to 64
[ 1.377085] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.377213] pci 0000:00:1c.2: setting latency timer to 64
[ 1.377219] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.377346] pci 0000:00:1c.4: setting latency timer to 64
[ 1.377353] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.377481] pci 0000:00:1c.5: setting latency timer to 64
[ 1.377485] pci 0000:00:1e.0: setting latency timer to 64
[ 1.377488] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.377489] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.377490] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.377491] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.377493] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.377494] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.377496] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 1.377497] pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff]
[ 1.377498] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.377500] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 1.377501] pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff]
[ 1.377502] pci_bus 0000:07: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.377503] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 1.377505] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 1.377506] pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.377507] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 1.377509] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 1.377510] pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.377511] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 1.377512] pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 1.377514] pci_bus 0000:04: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.377515] pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
[ 1.377516] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 1.377518] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 1.377519] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 1.377520] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.377521] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.377523] pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.377524] pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.377566] NET: Registered protocol family 2
[ 1.377740] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.378415] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.379091] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.379317] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.379444] TCP reno registered
[ 1.379566] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.379725] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.379968] NET: Registered protocol family 1
[ 1.380236] RPC: Registered udp transport module.
[ 1.380359] RPC: Registered tcp transport module.
[ 1.380482] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.380748] pci 0000:03:00.0: Boot video device
[ 1.380761] PCI: CLS 256 bytes, default 64
[ 1.380786] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.380915] Placing 64MB software IO TLB between ffff88000e000000 - ffff880012000000
[ 1.381135] software IO TLB at phys 0xe000000 - 0x12000000
[ 1.383321] VFS: Disk quotas dquot_6.5.2
[ 1.383462] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.383846] NTFS driver 2.1.29 [Flags: R/W].
[ 1.384011] fuse init (API version 7.13)
[ 1.384183] msgmni has been set to 24027
[ 1.384537] alg: No test for stdrng (krng)
[ 1.384695] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.384921] io scheduler noop registered
[ 1.385044] io scheduler deadline registered
[ 1.385181] io scheduler cfq registered (default)
[ 1.385369] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.385393] pcieport 0000:00:01.0: irq 48 for MSI/MSI-X
[ 1.385455] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.385478] pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
[ 1.385537] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.385562] pcieport 0000:00:07.0: irq 50 for MSI/MSI-X
[ 1.385624] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.385651] pcieport 0000:00:1c.0: irq 51 for MSI/MSI-X
[ 1.385734] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.385762] pcieport 0000:00:1c.2: irq 52 for MSI/MSI-X
[ 1.385843] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.385872] pcieport 0000:00:1c.4: irq 53 for MSI/MSI-X
[ 1.385956] pcieport 0000:00:1c.5: setting latency timer to 64
[ 1.385984] pcieport 0000:00:1c.5: irq 54 for MSI/MSI-X
[ 1.386081] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.386085] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.386088] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.387585] Non-volatile memory driver v1.3
[ 1.387801] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.388023] ACPI: Power Button [PWRB]
[ 1.388178] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.388397] ACPI: Power Button [PWRF]
[ 1.389025] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.390285] brd: module loaded
[ 1.390826] loop: module loaded
[ 1.391063] ahci 0000:05:00.0: version 3.0
[ 1.391076] ahci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.401341] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.404183] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.404313] ahci 0000:05:00.0: setting latency timer to 64
[ 1.404392] scsi0 : ahci
[ 1.404593] scsi1 : ahci
[ 1.404785] ata1: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16
[ 1.405006] ata2: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16
[ 1.405267] ata_piix 0000:00:1f.2: version 2.13
[ 1.405276] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.405405] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.405674] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.405705] scsi2 : ata_piix
[ 1.405886] scsi3 : ata_piix
[ 1.407271] ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 20
[ 1.407402] ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 20
[ 1.407544] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.407675] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.407940] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.407960] scsi4 : ata_piix
[ 1.408139] scsi5 : ata_piix
[ 1.409324] ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20
[ 1.409453] ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20
[ 1.409666] console [netcon0] enabled
[ 1.409788] netconsole: network logging started
[ 1.409970] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.410108] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.410242] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.410245] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.410408] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.410647] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.414657] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
[ 1.414666] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb9ff000
[ 1.424256] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.424402] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.424530] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.424749] usb usb1: Product: EHCI Host Controller
[ 1.424872] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
[ 1.424998] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.425192] hub 1-0:1.0: USB hub found
[ 1.425318] hub 1-0:1.0: 6 ports detected
[ 1.425481] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.425615] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.425618] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.425774] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.426009] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.429995] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
[ 1.430004] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb9fe000
[ 1.439218] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.439358] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.439486] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.439704] usb usb2: Product: EHCI Host Controller
[ 1.439828] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
[ 1.439954] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.440144] hub 2-0:1.0: USB hub found
[ 1.440268] hub 2-0:1.0: 6 ports detected
[ 1.440444] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.440591] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.440733] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.440863] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.440865] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.441024] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.441262] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
[ 1.441406] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.441536] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.441754] usb usb3: Product: UHCI Host Controller
[ 1.441877] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.442003] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.442193] hub 3-0:1.0: USB hub found
[ 1.442317] hub 3-0:1.0: 2 ports detected
[ 1.442470] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.442600] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.442602] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.442760] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.443002] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[ 1.443146] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.443272] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.443494] usb usb4: Product: UHCI Host Controller
[ 1.443617] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.443743] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.443931] hub 4-0:1.0: USB hub found
[ 1.444055] hub 4-0:1.0: 2 ports detected
[ 1.444205] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.444335] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.444337] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.444497] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.444740] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
[ 1.444883] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.445009] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.445227] usb usb5: Product: UHCI Host Controller
[ 1.445351] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.445479] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.445669] hub 5-0:1.0: USB hub found
[ 1.445793] hub 5-0:1.0: 2 ports detected
[ 1.445943] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.446072] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.446074] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.446231] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.446471] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
[ 1.446614] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.446741] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.446959] usb usb6: Product: UHCI Host Controller
[ 1.447083] usb usb6: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.447209] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.447400] hub 6-0:1.0: USB hub found
[ 1.447523] hub 6-0:1.0: 2 ports detected
[ 1.447674] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.447803] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.447805] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.447963] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.448201] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[ 1.448344] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.448474] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.448692] usb usb7: Product: UHCI Host Controller
[ 1.448815] usb usb7: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.448941] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.449131] hub 7-0:1.0: USB hub found
[ 1.449254] hub 7-0:1.0: 2 ports detected
[ 1.449406] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.449536] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.449538] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.449697] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.449934] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
[ 1.450077] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.450204] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.450425] usb usb8: Product: UHCI Host Controller
[ 1.450549] usb usb8: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.450674] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.450863] hub 8-0:1.0: USB hub found
[ 1.450987] hub 8-0:1.0: 2 ports detected
[ 1.451153] Initializing USB Mass Storage driver...
[ 1.451316] usbcore: registered new interface driver usb-storage
[ 1.451444] USB Mass Storage support registered.
[ 1.451604] usbcore: registered new interface driver libusual
[ 1.451782] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.453568] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.453695] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.453870] mice: PS/2 mouse device common for all mice
[ 1.454099] i2c /dev entries driver
[ 1.454263] md: raid0 personality registered for level 0
[ 1.454388] md: raid1 personality registered for level 1
[ 1.454604] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.454826] cpuidle: using governor ladder
[ 1.454949] cpuidle: using governor menu
[ 1.455191] usbcore: registered new interface driver hiddev
[ 1.455339] usbcore: registered new interface driver usbhid
[ 1.455465] usbhid: USB HID core driver
[ 1.455746] TCP cubic registered
[ 1.455868] NET: Registered protocol family 17
[ 1.456397] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.471089] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.708549] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.708553] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.812253] ata6: link resume succeeded after 1 retries
[ 1.812256] ata5: link resume succeeded after 1 retries
[ 2.042662] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 2.064650] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.064667] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.067908] ata5.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.068051] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.068056] ata6.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.068058] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.071890] ata5.00: configured for UDMA/133
[ 2.074158] ata6.00: configured for UDMA/133
[ 2.204376] usb 3-2: New USB device found, idVendor=051d, idProduct=0002
[ 2.204512] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.204639] usb 3-2: Product: Back-UPS BX1000G FW:869.L1 .D USB FW:L1
[ 2.204767] usb 3-2: Manufacturer: American Power Conversion
[ 2.204892] usb 3-2: SerialNumber: 3B1007X44377
[ 2.288260] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS BX1000G FW:869.L1 .D USB FW:L1 ] on usb-0000:00:1a.0-2/input0
[ 2.351921] ata3.00: SATA link down (SStatus 0 SControl 301)
[ 2.352061] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.366906] ata3.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.369657] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.370874] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.371019] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.376902] ata3.01: configured for UDMA/133
[ 2.377085] scsi 2:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.377253] ata4.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.377254] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.377458] ata4.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.377460] ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.377924] sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.377942] sd 2:0:1:0: Attached scsi generic sg0 type 0
[ 2.378301] sd 2:0:1:0: [sda] Write Protect is off
[ 2.378426] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.378438] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.378726] sda:
[ 2.383091] ata4.00: configured for UDMA/133
[ 2.387945] sda1 sda2 sda3 sda4 <
[ 2.390381] ata4.01: configured for UDMA/133
[ 2.390663] scsi 3:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.390980] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.391012] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 2.391071] scsi 3:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.391175] sd 3:0:1:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.391203] sd 3:0:1:0: Attached scsi generic sg2 type 0
[ 2.391211] sd 3:0:1:0: [sdc] Write Protect is off
[ 2.391213] sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.391228] sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.391281] scsi 4:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.391295] sdc:
[ 2.391380] sd 4:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.391405] sd 4:0:0:0: [sdd] Write Protect is off
[ 2.391406] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.391411] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 2.391417] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.391476] sdd:
[ 2.391576] scsi 5:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.391668] sd 5:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.391693] sd 5:0:0:0: [sde] Write Protect is off
[ 2.391694] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2.391702] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 2.391705] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.391773] sde: sda5 sdd1
[ 2.396105] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 2.403195] sde1
[ 2.403482] sd 5:0:0:0: [sde] Attached SCSI disk
[ 2.406378] sda6 >
[ 2.406623] sdc1
[ 2.406633] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.406635] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.406645] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.407115] sdc2 sdc3 sdc4 < sdc5
[ 2.419324] sd 2:0:1:0: [sda] Attached SCSI disk
[ 2.429255] sdc6 >
[ 2.444492] sdb:
[ 2.457151] sd 3:0:1:0: [sdc] Attached SCSI disk
[ 2.457394] sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
[ 2.493498] usb 8-2: new low speed USB device using uhci_hcd and address 2
[ 2.499011] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.662847] usb 8-2: New USB device found, idVendor=045e, idProduct=0039
[ 2.662982] usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.663113] usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 2.663241] usb 8-2: Manufacturer: Microsoft
[ 2.680939] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[ 2.681249] generic-usb 0003:045E:0039.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2/input0
[ 4.573939] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
[ 4.581438] md: Waiting for all devices to be available before autodetect
[ 4.581566] md: If you don't use raid, use raid=noautodetect
[ 4.581776] md: Autodetecting RAID arrays.
[ 4.646469] md: Scanned 6 and added 6 devices.
[ 4.646601] md: autorun ...
[ 4.646722] md: considering sdb5 ...
[ 4.646845] md: adding sdb5 ...
[ 4.646970] md: sdb3 has different UUID to sdb5
[ 4.647095] md: adding sdc5 ...
[ 4.647217] md: sdc3 has different UUID to sdb5
[ 4.647342] md: adding sda5 ...
[ 4.647464] md: sda3 has different UUID to sdb5
[ 4.647668] md: created md5
[ 4.647789] md: bind<sda5>
[ 4.647914] md: bind<sdc5>
[ 4.648041] md: bind<sdb5>
[ 4.648164] md: running: <sdb5><sdc5><sda5>
[ 4.648456] raid1: raid set md5 active with 3 out of 3 mirrors
[ 4.648594] md5: detected capacity change from 0 to 53694496768
[ 4.648741] md: considering sdb3 ...
[ 4.648864] md: adding sdb3 ...
[ 4.648990] md: adding sdc3 ...
[ 4.649112] md: adding sda3 ...
[ 4.649312] md: created md3
[ 4.649433] md: bind<sda3>
[ 4.649558] md: bind<sdc3>
[ 4.649682] md: bind<sdb3>
[ 4.649805] md: running: <sdb3><sdc3><sda3>
[ 4.650092] raid1: raid set md3 active with 3 out of 3 mirrors
[ 4.650228] md3: detected capacity change from 0 to 53694562304
[ 4.650374] md: ... autorun DONE.
[ 4.650530] md5: unknown partition table
[ 4.689954] kjournald starting. Commit interval 5 seconds
[ 4.689960] EXT3-fs (md5): mounted filesystem with writeback data mode
[ 4.689971] VFS: Mounted root (ext3 filesystem) readonly on device 9:5.
[ 4.690344] Freeing unused kernel memory: 476k freed
[ 4.690524] Write protecting the kernel read-only data: 6144k
[ 4.690730] Freeing unused kernel memory: 448k freed
[ 4.690928] Freeing unused kernel memory: 248k freed
[ 6.569411] udev: starting version 149
[ 6.690502] md3: unknown partition table
[ 6.773971] rtc_cmos 00:03: RTC can wake from S4
[ 6.774001] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 6.774024] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 6.882701] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.882704] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x0400-0x040f 64bit window disabled]
[ 6.882706] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.941923] sky2: driver version 1.27
[ 6.941945] sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.941954] sky2 0000:06:00.0: setting latency timer to 64
[ 6.941984] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.942068] sky2 0000:06:00.0: irq 55 for MSI/MSI-X
[ 6.942289] sky2 0000:06:00.0: eth0: addr e0:cb:4e:97:7a:09
[ 6.942305] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.942314] sky2 0000:04:00.0: setting latency timer to 64
[ 6.942334] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.942417] sky2 0000:04:00.0: irq 56 for MSI/MSI-X
[ 6.942584] sky2 0000:04:00.0: eth1: addr e0:cb:4e:97:80:fd
[ 7.018360] Linux agpgart interface v0.103
[ 7.061931] [drm] Initialized drm 1.1.0 20060810
[ 7.133990] [drm] radeon defaulting to kernel modesetting.
[ 7.133992] [drm] radeon kernel modesetting enabled.
[ 7.134026] radeon 0000:03:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
[ 7.134029] radeon 0000:03:00.0: setting latency timer to 64
[ 7.134890] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8).
[ 7.135082] [drm] register mmio base: 0xFBAC0000
[ 7.135083] [drm] register mmio size: 131072
[ 7.135150] ATOM BIOS: JUNIPER
[ 7.135159] [drm] Clocks initialized !
[ 7.135160] [drm] 1 Power State(s)
[ 7.135161] [drm] State 0 Default (default)
[ 7.135162] [drm] 16 PCIE Lanes
[ 7.135163] [drm] 1 Clock Mode(s)
[ 7.135164] [drm] 0 engine/memory: 850000/1200000
[ 7.135168] [drm] radeon: power management initialized
[ 7.135173] radeon 0000:03:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
[ 7.135175] radeon 0000:03:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
[ 7.135186] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 7.135247] [drm] Detected VRAM RAM=256M, BAR=256M
[ 7.135248] [drm] RAM width 128bits DDR
[ 7.135270] [TTM] Zone kernel: Available graphics memory: 6151634 kiB.
[ 7.135271] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 7.135278] [drm] radeon: 256M of VRAM memory ready
[ 7.135279] [drm] radeon: 512M of GTT memory ready.
[ 7.136626] [drm] Radeon Display Connectors
[ 7.136628] [drm] Connector 0:
[ 7.136629] [drm] DisplayPort
[ 7.136630] [drm] HPD4
[ 7.136632] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 7.136633] [drm] Encoders:
[ 7.136635] [drm] DFP1: INTERNAL_UNIPHY2
[ 7.136636] [drm] Connector 1:
[ 7.136637] [drm] HDMI-A
[ 7.136638] [drm] HPD5
[ 7.136640] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 7.136642] [drm] Encoders:
[ 7.136643] [drm] DFP2: INTERNAL_UNIPHY2
[ 7.136645] [drm] Connector 2:
[ 7.136646] [drm] DVI-I
[ 7.136647] [drm] HPD1
[ 7.136649] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 7.136650] [drm] Encoders:
[ 7.136652] [drm] DFP3: INTERNAL_UNIPHY1
[ 7.136653] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 7.136655] [drm] Connector 3:
[ 7.136656] [drm] DVI-I
[ 7.136657] [drm] HPD6
[ 7.136659] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 7.136661] [drm] Encoders:
[ 7.136662] [drm] DFP4: INTERNAL_UNIPHY
[ 7.136664] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.303867] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.303915] HDA Intel 0000:00:1b.0: irq 57 for MSI/MSI-X
[ 7.303937] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.486184] [drm] fb mappable at 0xD0040000
[ 7.486185] [drm] vram apper at 0xD0000000
[ 7.486186] [drm] size 8294400
[ 7.486187] [drm] fb depth is 24
[ 7.486188] [drm] pitch is 7680
[ 7.493774] Console: switching to colour frame buffer device 240x67
[ 7.497766] fb0: radeondrmfb frame buffer device
[ 7.497767] registered panic notifier
[ 7.497770] [drm] Initialized radeon 2.3.0 20080528 for 0000:03:00.0 on minor 0
[ 7.683309] hda_codec: AD1989B: BIOS auto-probing.
[ 7.685597] HDA Intel 0000:03:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
[ 7.685640] HDA Intel 0000:03:00.1: irq 58 for MSI/MSI-X
[ 7.685657] HDA Intel 0000:03:00.1: setting latency timer to 64
[ 8.309117] EXT3-fs (md5): using internal journal
[ 8.615971] md: md11 stopped.
[ 8.657875] md: bind<sde1>
[ 8.658048] md: bind<sdd1>
[ 8.658542] raid0: looking at sdd1
[ 8.658544] raid0: comparing sdd1(104871936)
[ 8.658545] with sdd1(104871936)
[ 8.658546] raid0: END
[ 8.658546] raid0: ==> UNIQUE
[ 8.658547] raid0: 1 zones
[ 8.658548] raid0: looking at sde1
[ 8.658549] raid0: comparing sde1(104871936)
[ 8.658550] with sdd1(104871936)
[ 8.658551] raid0: EQUAL
[ 8.658552] raid0: FINAL 1 zones
[ 8.658553] raid0: done.
[ 8.658554] raid0 : md_size is 209743872 sectors.
[ 8.658555] ******* md11 configuration *********
[ 8.658556] zone0=[sdd1/sde1/]
[ 8.658558] zone offset=0kb device offset=0kb size=104871936kb
[ 8.658559] **********************************
[ 8.658559]
[ 8.658563] md11: detected capacity change from 0 to 107388862464
[ 8.659021] md11: unknown partition table
[ 8.664395] md: md6 stopped.
[ 8.665354] md: bind<sdb6>
[ 8.665657] md: bind<sdc6>
[ 8.665845] md: bind<sda6>
[ 8.666379] raid1: raid set md6 active with 3 out of 3 mirrors
[ 8.666391] md6: detected capacity change from 0 to 253354939392
[ 8.666632] md6: unknown partition table
[ 9.180550] kjournald starting. Commit interval 5 seconds
[ 9.180554] EXT3-fs (md11): warning: maximal mount count reached, running e2fsck is recommended
[ 9.180812] EXT3-fs (md11): using internal journal
[ 9.180817] EXT3-fs (md11): mounted filesystem with writeback data mode
[ 9.222457] kjournald starting. Commit interval 5 seconds
[ 9.222460] EXT3-fs (md6): warning: maximal mount count reached, running e2fsck is recommended
[ 9.238847] EXT3-fs (md6): using internal journal
[ 9.238852] EXT3-fs (md6): mounted filesystem with writeback data mode
[ 9.306719] Adding 4200992k swap on /dev/sda2. Priority:-1 extents:1 across:4200992k
[ 9.308071] Adding 4200992k swap on /dev/sdb2. Priority:-2 extents:1 across:4200992k
[ 9.309487] Adding 4200992k swap on /dev/sdc2. Priority:-3 extents:1 across:4200992k
[ 15.215185] sky2 0000:06:00.0: eth0: enabling interface
[ 17.133294] sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 26.742950] NET: Registered protocol family 10
[ 28.983183] /dev/vmmon[4193]: Module vmmon: registered with major=10 minor=165
[ 28.983191] /dev/vmmon[4193]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 28.983197] /dev/vmmon[4193]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 28.983198] /dev/vmmon[4193]: Module vmmon: initialized
[ 29.089626] /dev/vmci[4212]: VMCI: Driver initialized.
[ 29.089647] /dev/vmci[4212]: Module vmci: registered with major=10 minor=59
[ 29.089649] /dev/vmci[4212]: Module vmci: initialized
[ 29.387878] /dev/vmnet: open called by PID 4294 (vmnet-bridge)
[ 29.387883] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 29.387902] /dev/vmnet: port on hub 0 successfully opened
[ 29.387913] bridge-eth0: up
[ 29.387915] bridge-eth0: attached
[ 30.600891] /dev/vmnet: open called by PID 4301 (vmnet-dhcpd)
[ 30.600896] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 30.600915] /dev/vmnet: port on hub 1 successfully opened
[ 30.649363] /dev/vmnet: open called by PID 4303 (vmnet-netifup)
[ 30.649368] /dev/vmnet: port on hub 1 successfully opened
[ 30.693440] /dev/vmnet: open called by PID 4306 (vmnet-dhcpd)
[ 30.693445] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 30.693465] /dev/vmnet: port on hub 8 successfully opened
[ 30.791250] /dev/vmnet: open called by PID 4310 (vmnet-natd)
[ 30.791256] /dev/vmnet: port on hub 8 successfully opened
[ 30.799896] /dev/vmnet: open called by PID 4311 (vmnet-netifup)
[ 30.799902] /dev/vmnet: port on hub 8 successfully opened
[ 37.466088] eth0: no IPv6 routers present
[ 41.182014] vmnet8: no IPv6 routers present
[ 41.325622] vmnet1: no IPv6 routers present
[-- Attachment #3: dmesg.IDEDriveMissing --]
[-- Type: application/octet-stream, Size: 60234 bytes --]
[ 0.000000] Linux version 2.6.34-gentoo-r1 (root@c2stable) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #4 SMP PREEMPT Tue Jul 6 10:35:15 PDT 2010
[ 0.000000] Command line: root=/dev/md5
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask F00000000 write-back
[ 0.000000] 2 base 300000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf780000 page 4k
[ 0.000000] kernel direct mapping tables up to bf780000 @ 12000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[ 0.000000] 0100000000 - 0340000000 page 1G
[ 0.000000] kernel direct mapping tables up to 340000000 @ 14000-15000
[ 0.000000] ACPI: RSDP 00000000000fb0c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bf780000 00040 (v01 012810 RSDT1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780200 00084 (v01 012810 FACP1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 0D2BA (v01 A1088 A1088000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 00040
[ 0.000000] ACPI: APIC 00000000bf780390 000D8 (v01 012810 APIC1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 0003C (v01 012810 OEMMCFG 20100128 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 00072 (v01 012810 OEMB1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 00038 (v01 012810 OEMHPET 20100128 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 000B0 (v01 012810 OEMOSFR 20100128 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79ba40 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea000b5fffff] PMD -> [ffff880002000000-ffff88000c7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00340000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf780
[ 0.000000] 0: 0x00100000 -> 0x00340000
[ 0.000000] On node 0 totalpages: 3143439
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765880 pages, LIFO batch:31
[ 0.000000] Normal zone: 32256 pages used for memmap
[ 0.000000] Normal zone: 2327040 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 12
[ 0.000000] SMP: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] early_res array is doubled to 64 at [14000 - 147ff]
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001800000 s75176 r8192 d23128 u131072
[ 0.000000] pcpu-alloc: s75176 r8192 d23128 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096847
[ 0.000000] Kernel command line: root=/dev/md5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] early_res array is doubled to 128 at [14800 - 157ff]
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (60 early reservations)
[ 0.000000] #1 [0001000000 - 0001771144] TEXT DATA BSS
[ 0.000000] #2 [0001772000 - 0001772298] BRK
[ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #5 [000009fc00 - 00000f1310] BIOS reserved
[ 0.000000] #6 [00000f14fc - 00000ff780] BIOS reserved
[ 0.000000] #7 [00000f1310 - 00000f14fc] MP-table mpc
[ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #9 [0000012000 - 0000014000] PGTABLE
[ 0.000000] #10 [00017722c0 - 00017732c0] BOOTMEM
[ 0.000000] #11 [0001771180 - 0001771780] BOOTMEM
[ 0.000000] #12 [0001f74000 - 0001f75000] BOOTMEM
[ 0.000000] #13 [0001f75000 - 0001f76000] BOOTMEM
[ 0.000000] #14 [0002000000 - 000c800000] MEMMAP 0
[ 0.000000] #15 [0001771780 - 0001771900] BOOTMEM
[ 0.000000] #16 [00017732c0 - 000178b2c0] BOOTMEM
[ 0.000000] #17 [000178b2c0 - 00017a32c0] BOOTMEM
[ 0.000000] #18 [00017a4000 - 00017a5000] BOOTMEM
[ 0.000000] #19 [0001771900 - 0001771941] BOOTMEM
[ 0.000000] #20 [0001771980 - 0001771a06] BOOTMEM
[ 0.000000] #21 [0001771a40 - 0001771ca8] BOOTMEM
[ 0.000000] #22 [0001771cc0 - 0001771d28] BOOTMEM
[ 0.000000] #23 [0001771d40 - 0001771da8] BOOTMEM
[ 0.000000] #24 [0001771dc0 - 0001771e28] BOOTMEM
[ 0.000000] #25 [0001771e40 - 0001771ea8] BOOTMEM
[ 0.000000] #26 [0001771ec0 - 0001771f28] BOOTMEM
[ 0.000000] #27 [0001771f40 - 0001771fa8] BOOTMEM
[ 0.000000] #28 [00017a32c0 - 00017a3328] BOOTMEM
[ 0.000000] #29 [00017a3340 - 00017a33a8] BOOTMEM
[ 0.000000] #30 [00017a33c0 - 00017a3428] BOOTMEM
[ 0.000000] #31 [00017a3440 - 00017a34a8] BOOTMEM
[ 0.000000] #32 [0001771fc0 - 0001771fce] BOOTMEM
[ 0.000000] #33 [00017a34c0 - 00017a34ce] BOOTMEM
[ 0.000000] #34 [0001800000 - 000181a000] BOOTMEM
[ 0.000000] #35 [0001820000 - 000183a000] BOOTMEM
[ 0.000000] #36 [0001840000 - 000185a000] BOOTMEM
[ 0.000000] #37 [0001860000 - 000187a000] BOOTMEM
[ 0.000000] #38 [0001880000 - 000189a000] BOOTMEM
[ 0.000000] #39 [00018a0000 - 00018ba000] BOOTMEM
[ 0.000000] #40 [00018c0000 - 00018da000] BOOTMEM
[ 0.000000] #41 [00018e0000 - 00018fa000] BOOTMEM
[ 0.000000] #42 [0001900000 - 000191a000] BOOTMEM
[ 0.000000] #43 [0001920000 - 000193a000] BOOTMEM
[ 0.000000] #44 [0001940000 - 000195a000] BOOTMEM
[ 0.000000] #45 [0001960000 - 000197a000] BOOTMEM
[ 0.000000] #46 [00017a3500 - 00017a3508] BOOTMEM
[ 0.000000] #47 [00017a3540 - 00017a3548] BOOTMEM
[ 0.000000] #48 [00017a3580 - 00017a35b0] BOOTMEM
[ 0.000000] #49 [00017a35c0 - 00017a3620] BOOTMEM
[ 0.000000] #50 [00017a3640 - 00017a3750] BOOTMEM
[ 0.000000] #51 [00017a3780 - 00017a37c8] BOOTMEM
[ 0.000000] #52 [00017a3800 - 00017a3848] BOOTMEM
[ 0.000000] #53 [00017a5000 - 00017ad000] BOOTMEM
[ 0.000000] #54 [000c800000 - 000d800000] BOOTMEM
[ 0.000000] #55 [000d800000 - 000e000000] BOOTMEM
[ 0.000000] #56 [000e000000 - 0012000000] BOOTMEM
[ 0.000000] #57 [00017ad000 - 00017cd000] BOOTMEM
[ 0.000000] #58 [000197a000 - 00019ba000] BOOTMEM
[ 0.000000] #59 [0000015800 - 000001d800] BOOTMEM
[ 0.000000] Memory: 12302060k/13631488k available (3630k kernel code, 1057732k absent, 271696k reserved, 2958k data, 476k init)
[ 0.000000] Experimental preemptable hierarchical RCU implementation.
[ 0.000000] NR_IRQS:640
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 3338.194 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6676.38 BogoMIPS (lpj=3338194)
[ 0.000296] Security Framework initialized
[ 0.000436] Mount-cache hash table entries: 256
[ 0.000642] CPU: Physical Processor ID: 0
[ 0.000767] CPU: Processor Core ID: 0
[ 0.000894] mce: CPU supports 9 MCE banks
[ 0.001030] CPU0: Thermal monitoring enabled (TM1)
[ 0.001163] using mwait in idle threads.
[ 0.001296] Performance Events: Westmere events, Intel PMU driver.
[ 0.001477] ... version: 3
[ 0.001602] ... bit width: 48
[ 0.001727] ... generic registers: 4
[ 0.001852] ... value mask: 0000ffffffffffff
[ 0.001980] ... max period: 000000007fffffff
[ 0.002107] ... fixed-purpose events: 3
[ 0.002239] ... event mask: 000000070000000f
[ 0.002386] Freeing SMP alternatives: 36k freed
[ 0.002517] ACPI: Core revision 20100121
[ 0.041833] Setting APIC routing to physical flat
[ 0.042401] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052507] CPU0: Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz stepping 02
[ 0.159795] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 Ok.
[ 1.204151] Brought up 12 CPUs
[ 1.204276] Total of 12 processors activated (81697.10 BogoMIPS).
[ 1.210793] NET: Registered protocol family 16
[ 1.213689] ACPI: bus type pci registered
[ 1.213870] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.214100] PCI: not using MMCONFIG
[ 1.214223] PCI: Using configuration type 1 for base access
[ 1.216248] bio: create slab <bio-0> at 0
[ 1.217577] ACPI: EC: Look up EC in DSDT
[ 1.218706] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.299202] ACPI: SSDT 00000000bf7980c0 03978 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.300038] ACPI: Interpreter enabled
[ 1.300162] ACPI: (supports S0 S5)
[ 1.300340] ACPI: Using IOAPIC for interrupt routing
[ 1.300504] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.302306] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.327180] ACPI: No dock devices found.
[ 1.327305] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.327636] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.327981] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.328110] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.328239] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.328461] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 1.328684] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 1.328909] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 1.329172] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.329175] pci 0000:00:00.0: PME# disabled
[ 1.329217] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.329219] pci 0000:00:01.0: PME# disabled
[ 1.329261] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.329263] pci 0000:00:03.0: PME# disabled
[ 1.329307] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.329309] pci 0000:00:07.0: PME# disabled
[ 1.329477] pci 0000:00:1a.0: reg 20: [io 0x9800-0x981f]
[ 1.329530] pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
[ 1.329583] pci 0000:00:1a.2: reg 20: [io 0x9c00-0x9c1f]
[ 1.329635] pci 0000:00:1a.7: reg 10: [mem 0xfb9ff000-0xfb9ff3ff]
[ 1.329680] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.329683] pci 0000:00:1a.7: PME# disabled
[ 1.329712] pci 0000:00:1b.0: reg 10: [mem 0xfb9f8000-0xfb9fbfff 64bit]
[ 1.329746] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.329748] pci 0000:00:1b.0: PME# disabled
[ 1.329799] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.329802] pci 0000:00:1c.0: PME# disabled
[ 1.329855] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.329857] pci 0000:00:1c.2: PME# disabled
[ 1.329910] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.329913] pci 0000:00:1c.4: PME# disabled
[ 1.329965] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.329968] pci 0000:00:1c.5: PME# disabled
[ 1.330007] pci 0000:00:1d.0: reg 20: [io 0x9080-0x909f]
[ 1.330060] pci 0000:00:1d.1: reg 20: [io 0x9400-0x941f]
[ 1.330112] pci 0000:00:1d.2: reg 20: [io 0x9480-0x949f]
[ 1.330164] pci 0000:00:1d.7: reg 10: [mem 0xfb9fe000-0xfb9fe3ff]
[ 1.330210] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.330213] pci 0000:00:1d.7: PME# disabled
[ 1.330308] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 1.330532] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 1.330663] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 1.330927] pci 0000:00:1f.2: reg 10: [io 0x8000-0x8007]
[ 1.330931] pci 0000:00:1f.2: reg 14: [io 0x7c00-0x7c03]
[ 1.330935] pci 0000:00:1f.2: reg 18: [io 0x7880-0x7887]
[ 1.330940] pci 0000:00:1f.2: reg 1c: [io 0x7800-0x7803]
[ 1.330944] pci 0000:00:1f.2: reg 20: [io 0x7480-0x748f]
[ 1.330948] pci 0000:00:1f.2: reg 24: [io 0x7400-0x740f]
[ 1.330984] pci 0000:00:1f.3: reg 10: [mem 0xfb9fd000-0xfb9fd0ff 64bit]
[ 1.330994] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 1.331024] pci 0000:00:1f.5: reg 10: [io 0x9000-0x9007]
[ 1.331028] pci 0000:00:1f.5: reg 14: [io 0x8c00-0x8c03]
[ 1.331032] pci 0000:00:1f.5: reg 18: [io 0x8880-0x8887]
[ 1.331036] pci 0000:00:1f.5: reg 1c: [io 0x8800-0x8803]
[ 1.331040] pci 0000:00:1f.5: reg 20: [io 0x8480-0x848f]
[ 1.331044] pci 0000:00:1f.5: reg 24: [io 0x8400-0x840f]
[ 1.331094] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.331221] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.331223] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.331227] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.331254] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.331381] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.331383] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.331387] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.331427] pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.331434] pci 0000:03:00.0: reg 18: [mem 0xfbac0000-0xfbadffff 64bit]
[ 1.331438] pci 0000:03:00.0: reg 20: [io 0xa000-0xa0ff]
[ 1.331444] pci 0000:03:00.0: reg 30: [mem 0xfbaa0000-0xfbabffff pref]
[ 1.331459] pci 0000:03:00.0: supports D1 D2
[ 1.331480] pci 0000:03:00.1: reg 10: [mem 0xfbafc000-0xfbafffff 64bit]
[ 1.331508] pci 0000:03:00.1: supports D1 D2
[ 1.331518] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.331646] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.331649] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.331652] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.331684] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.331814] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.331816] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.331821] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.331886] pci 0000:06:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[ 1.331892] pci 0000:06:00.0: reg 18: [io 0xd800-0xd8ff]
[ 1.331915] pci 0000:06:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[ 1.331950] pci 0000:06:00.0: supports D1 D2
[ 1.331951] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.331955] pci 0000:06:00.0: PME# disabled
[ 1.331964] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.332091] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.332094] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.332098] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.332196] pci 0000:05:00.0: reg 24: [mem 0xfbcfe000-0xfbcfffff]
[ 1.332230] pci 0000:05:00.0: PME# supported from D3hot
[ 1.332234] pci 0000:05:00.0: PME# disabled
[ 1.332274] pci 0000:05:00.1: reg 10: [io 0xcc00-0xcc07]
[ 1.332281] pci 0000:05:00.1: reg 14: [io 0xc880-0xc883]
[ 1.332289] pci 0000:05:00.1: reg 18: [io 0xc800-0xc807]
[ 1.332296] pci 0000:05:00.1: reg 1c: [io 0xc480-0xc483]
[ 1.332303] pci 0000:05:00.1: reg 20: [io 0xc400-0xc40f]
[ 1.332356] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.332483] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.332486] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.332490] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.332557] pci 0000:04:00.0: reg 10: [mem 0xfbbfc000-0xfbbfffff 64bit]
[ 1.332564] pci 0000:04:00.0: reg 18: [io 0xb800-0xb8ff]
[ 1.332586] pci 0000:04:00.0: reg 30: [mem 0xfbbc0000-0xfbbdffff pref]
[ 1.332621] pci 0000:04:00.0: supports D1 D2
[ 1.332623] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.332626] pci 0000:04:00.0: PME# disabled
[ 1.332636] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.332765] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.332768] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.332772] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.332811] pci 0000:08:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff]
[ 1.332816] pci 0000:08:02.0: reg 14: [io 0xec00-0xec7f]
[ 1.332853] pci 0000:08:02.0: supports D2
[ 1.332854] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
[ 1.332857] pci 0000:08:02.0: PME# disabled
[ 1.332893] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 1.333023] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.333026] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.333030] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.333031] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.333033] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.333034] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.333036] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 1.333037] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 1.333039] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 1.333063] pci_bus 0000:00: on NUMA node 0
[ 1.333066] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.333297] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.333372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 1.333417] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 1.333461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 1.333513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 1.333557] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 1.333600] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 1.333642] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 1.354013] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 1.354501] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 1.354787] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 1.355272] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 1.355759] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 1.356243] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 1.356731] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 1.357215] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 1.357797] SCSI subsystem initialized
[ 1.358030] libata version 3.00 loaded.
[ 1.358113] usbcore: registered new interface driver usbfs
[ 1.358258] usbcore: registered new interface driver hub
[ 1.358406] usbcore: registered new device driver usb
[ 1.358647] PCI: Using ACPI for IRQ routing
[ 1.358772] PCI: pci_cache_line_size set to 64 bytes
[ 1.358854] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 1.358855] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff
[ 1.358925] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.359176] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.361315] Switching to clocksource tsc
[ 1.361819] pnp: PnP ACPI init
[ 1.361944] ACPI: bus type pnp registered
[ 1.364476] pnp: PnP ACPI: found 17 devices
[ 1.364603] ACPI: ACPI bus type pnp unregistered
[ 1.364734] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 1.364863] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 1.364991] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 1.365119] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 1.365247] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 1.365375] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
[ 1.365506] system 00:07: [io 0x0290-0x029f] has been reserved
[ 1.365636] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.365764] system 00:08: [io 0x0800-0x087f] has been reserved
[ 1.365891] system 00:08: [io 0x0500-0x057f] could not be reserved
[ 1.366018] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.366147] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.366275] system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 1.366405] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
[ 1.366535] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.366666] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.366797] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.366926] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.367055] system 00:10: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.367183] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.367311] system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
[ 1.367440] system 00:10: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.372161] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc03fffff]
[ 1.372290] pci 0000:00:1c.2: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.372513] pci 0000:00:1c.4: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.372737] pci 0000:00:1c.5: BAR 9: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.372960] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 1.373087] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.373212] pci 0000:00:01.0: bridge window [io disabled]
[ 1.373340] pci 0000:00:01.0: bridge window [mem disabled]
[ 1.373467] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 1.373597] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.373723] pci 0000:00:03.0: bridge window [io disabled]
[ 1.373851] pci 0000:00:03.0: bridge window [mem disabled]
[ 1.373978] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 1.374107] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.374233] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.374362] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.374491] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.374717] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.374843] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.374972] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 1.375102] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.375327] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.375453] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.375583] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.375713] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.375938] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.376064] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.376193] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.376322] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.376549] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.376675] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.376804] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.376934] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.377159] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 1.377284] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.377413] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.377544] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.377679] pci 0000:00:01.0: setting latency timer to 64
[ 1.377684] pci 0000:00:03.0: setting latency timer to 64
[ 1.377690] pci 0000:00:07.0: setting latency timer to 64
[ 1.377695] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 1.377825] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.377954] pci 0000:00:1c.0: setting latency timer to 64
[ 1.377961] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.378090] pci 0000:00:1c.2: setting latency timer to 64
[ 1.378095] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.378224] pci 0000:00:1c.4: setting latency timer to 64
[ 1.378231] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.378360] pci 0000:00:1c.5: setting latency timer to 64
[ 1.378364] pci 0000:00:1e.0: setting latency timer to 64
[ 1.378366] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.378368] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.378369] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.378370] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.378371] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.378373] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.378374] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 1.378375] pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff]
[ 1.378377] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.378378] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 1.378379] pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff]
[ 1.378381] pci_bus 0000:07: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.378382] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 1.378383] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 1.378384] pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.378386] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 1.378387] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 1.378388] pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.378390] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 1.378391] pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 1.378392] pci_bus 0000:04: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.378393] pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
[ 1.378395] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 1.378396] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 1.378397] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 1.378398] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.378400] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.378401] pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.378402] pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.378442] NET: Registered protocol family 2
[ 1.378618] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.379291] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.379973] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.380205] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.380333] TCP reno registered
[ 1.380456] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.380620] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.380864] NET: Registered protocol family 1
[ 1.381153] RPC: Registered udp transport module.
[ 1.381278] RPC: Registered tcp transport module.
[ 1.381402] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.381672] pci 0000:03:00.0: Boot video device
[ 1.381686] PCI: CLS 256 bytes, default 64
[ 1.381711] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.381839] Placing 64MB software IO TLB between ffff88000e000000 - ffff880012000000
[ 1.382061] software IO TLB at phys 0xe000000 - 0x12000000
[ 1.384260] VFS: Disk quotas dquot_6.5.2
[ 1.384403] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.384793] NTFS driver 2.1.29 [Flags: R/W].
[ 1.384955] fuse init (API version 7.13)
[ 1.385128] msgmni has been set to 24027
[ 1.385470] alg: No test for stdrng (krng)
[ 1.385626] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.385850] io scheduler noop registered
[ 1.385973] io scheduler deadline registered
[ 1.386111] io scheduler cfq registered (default)
[ 1.386299] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.386323] pcieport 0000:00:01.0: irq 48 for MSI/MSI-X
[ 1.386387] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.386409] pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
[ 1.386470] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.386492] pcieport 0000:00:07.0: irq 50 for MSI/MSI-X
[ 1.386622] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.386650] pcieport 0000:00:1c.0: irq 51 for MSI/MSI-X
[ 1.386733] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.386761] pcieport 0000:00:1c.2: irq 52 for MSI/MSI-X
[ 1.386841] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.386869] pcieport 0000:00:1c.4: irq 53 for MSI/MSI-X
[ 1.386948] pcieport 0000:00:1c.5: setting latency timer to 64
[ 1.386976] pcieport 0000:00:1c.5: irq 54 for MSI/MSI-X
[ 1.387073] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.387078] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.387081] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.388489] Non-volatile memory driver v1.3
[ 1.388716] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.388941] ACPI: Power Button [PWRB]
[ 1.389098] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.389320] ACPI: Power Button [PWRF]
[ 1.389952] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.391225] brd: module loaded
[ 1.391779] loop: module loaded
[ 1.392014] ahci 0000:05:00.0: version 3.0
[ 1.392027] ahci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.402484] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.402718] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.402849] ahci 0000:05:00.0: setting latency timer to 64
[ 1.402931] scsi0 : ahci
[ 1.403130] scsi1 : ahci
[ 1.405966] ata1: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16
[ 1.406189] ata2: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16
[ 1.406452] ata_piix 0000:00:1f.2: version 2.13
[ 1.406461] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.406592] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.406863] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.406894] scsi2 : ata_piix
[ 1.407076] scsi3 : ata_piix
[ 1.408459] ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 20
[ 1.408591] ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 20
[ 1.408734] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.408866] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.409133] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.409154] scsi4 : ata_piix
[ 1.409335] scsi5 : ata_piix
[ 1.410527] ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20
[ 1.410660] ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20
[ 1.410871] console [netcon0] enabled
[ 1.410995] netconsole: network logging started
[ 1.411177] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.411315] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.411451] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.411453] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.411619] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.411860] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.415863] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
[ 1.415871] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb9ff000
[ 1.425401] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.425547] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.425677] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.425898] usb usb1: Product: EHCI Host Controller
[ 1.426023] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
[ 1.426150] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.426347] hub 1-0:1.0: USB hub found
[ 1.426472] hub 1-0:1.0: 6 ports detected
[ 1.426637] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.426772] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.426774] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.426932] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.427169] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.431171] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
[ 1.431180] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb9fe000
[ 1.440364] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.440506] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.440636] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.440857] usb usb2: Product: EHCI Host Controller
[ 1.440982] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
[ 1.441109] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.441302] hub 2-0:1.0: USB hub found
[ 1.441426] hub 2-0:1.0: 6 ports detected
[ 1.441603] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.441752] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.441896] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.442027] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.442029] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.442190] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.442430] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
[ 1.442578] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.442706] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.442927] usb usb3: Product: UHCI Host Controller
[ 1.443051] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.443179] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.443372] hub 3-0:1.0: USB hub found
[ 1.443497] hub 3-0:1.0: 2 ports detected
[ 1.443652] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.443783] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.443785] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.443943] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.444187] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[ 1.444332] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.444460] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.444684] usb usb4: Product: UHCI Host Controller
[ 1.444809] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.444936] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.445125] hub 4-0:1.0: USB hub found
[ 1.445250] hub 4-0:1.0: 2 ports detected
[ 1.445402] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.445533] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.445535] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.445695] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.445941] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
[ 1.446086] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.446214] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.446435] usb usb5: Product: UHCI Host Controller
[ 1.446562] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.446689] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.446880] hub 5-0:1.0: USB hub found
[ 1.447005] hub 5-0:1.0: 2 ports detected
[ 1.447157] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.447288] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.447290] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.447448] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.447690] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
[ 1.447835] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.447962] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.448183] usb usb6: Product: UHCI Host Controller
[ 1.448308] usb usb6: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.448436] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.448628] hub 6-0:1.0: USB hub found
[ 1.448753] hub 6-0:1.0: 2 ports detected
[ 1.448904] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.449036] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.449038] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.449196] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.449437] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[ 1.449584] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.449712] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.449933] usb usb7: Product: UHCI Host Controller
[ 1.450058] usb usb7: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.450185] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.450376] hub 7-0:1.0: USB hub found
[ 1.450501] hub 7-0:1.0: 2 ports detected
[ 1.450654] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.450785] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.450787] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.450946] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.451186] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
[ 1.451331] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.451459] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.451682] usb usb8: Product: UHCI Host Controller
[ 1.451807] usb usb8: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.451934] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.452124] hub 8-0:1.0: USB hub found
[ 1.452249] hub 8-0:1.0: 2 ports detected
[ 1.452417] Initializing USB Mass Storage driver...
[ 1.452584] usbcore: registered new interface driver usb-storage
[ 1.452711] USB Mass Storage support registered.
[ 1.452872] usbcore: registered new interface driver libusual
[ 1.453050] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.454889] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.455018] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.455193] mice: PS/2 mouse device common for all mice
[ 1.455427] i2c /dev entries driver
[ 1.455590] md: raid0 personality registered for level 0
[ 1.455717] md: raid1 personality registered for level 1
[ 1.455932] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.456157] cpuidle: using governor ladder
[ 1.456281] cpuidle: using governor menu
[ 1.456525] usbcore: registered new interface driver hiddev
[ 1.456677] usbcore: registered new interface driver usbhid
[ 1.456803] usbhid: USB HID core driver
[ 1.457085] TCP cubic registered
[ 1.457208] NET: Registered protocol family 17
[ 1.457732] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.472972] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.710726] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.710729] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.044877] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 2.206546] usb 3-2: New USB device found, idVendor=051d, idProduct=0002
[ 2.206683] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.206812] usb 3-2: Product: Back-UPS BX1000G FW:869.L1 .D USB FW:L1
[ 2.206940] usb 3-2: Manufacturer: American Power Conversion
[ 2.207067] usb 3-2: SerialNumber: 3B1007X44377
[ 2.210522] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.210668] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.216983] ata4.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.217120] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.217433] ata4.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.217585] ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.223759] ata4.00: configured for UDMA/133
[ 2.230302] ata4.01: configured for UDMA/133
[ 2.233461] ata3.00: SATA link down (SStatus 0 SControl 301)
[ 2.233603] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.247860] ata3.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.247996] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.251686] ata3.01: configured for UDMA/133
[ 2.251872] scsi 2:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.252203] sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.252221] sd 2:0:1:0: Attached scsi generic sg0 type 0
[ 2.252592] scsi 3:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.253407] sd 2:0:1:0: [sda] Write Protect is off
[ 2.253408] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.253426] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.253524] sda:
[ 2.255942] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.255976] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 2.256036] scsi 3:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.256132] sd 3:0:1:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.256157] sd 3:0:1:0: [sdc] Write Protect is off
[ 2.256158] sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.256159] sd 3:0:1:0: Attached scsi generic sg2 type 0
[ 2.256169] sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.256233] sdc: sda1 sda2 sda3 sda4 < sdc1 sdc2
[ 2.267155] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.267158] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.267180] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.267655] sdc3 sdc4 < sdc5 sda5 sdc6 >
[ 2.290413] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS BX1000G FW:869.L1 .D USB FW:L1 ] on usb-0000:00:1a.0-2/input0
[ 2.293579] sda6 >
[ 2.305064] sdb:
[ 2.306533] sd 2:0:1:0: [sda] Attached SCSI disk
[ 2.313062] sd 3:0:1:0: [sdc] Attached SCSI disk
[ 2.313190] sdb1 sdb2 sdb3 sdb4 < sdb5
[ 2.328956] ata5: SATA link down (SStatus 0 SControl 301)
[ 2.337495] sdb6 >
[ 2.354922] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.481838] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.485070] ata6.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.485207] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.491826] ata6.00: configured for UDMA/133
[ 2.491998] scsi 5:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.492314] sd 5:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.492354] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 2.492686] sd 5:0:0:0: [sdd] Write Protect is off
[ 2.492815] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.492826] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.493113] sdd:
[ 2.495773] usb 8-2: new low speed USB device using uhci_hcd and address 2
[ 2.503117] sdd1
[ 2.503410] sd 5:0:0:0: [sdd] Attached SCSI disk
[ 2.665098] usb 8-2: New USB device found, idVendor=045e, idProduct=0039
[ 2.665235] usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.665367] usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 2.665496] usb 8-2: Manufacturer: Microsoft
[ 2.683191] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[ 2.683504] generic-usb 0003:045E:0039.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2/input0
[ 4.574284] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
[ 4.581943] md: Waiting for all devices to be available before autodetect
[ 4.582079] md: If you don't use raid, use raid=noautodetect
[ 4.582288] md: Autodetecting RAID arrays.
[ 4.643656] md: Scanned 6 and added 6 devices.
[ 4.643788] md: autorun ...
[ 4.643910] md: considering sdb5 ...
[ 4.644035] md: adding sdb5 ...
[ 4.644159] md: sdb3 has different UUID to sdb5
[ 4.644285] md: adding sda5 ...
[ 4.644408] md: sda3 has different UUID to sdb5
[ 4.644538] md: adding sdc5 ...
[ 4.644662] md: sdc3 has different UUID to sdb5
[ 4.644868] md: created md5
[ 4.644991] md: bind<sdc5>
[ 4.645117] md: bind<sda5>
[ 4.645243] md: bind<sdb5>
[ 4.645368] md: running: <sdb5><sda5><sdc5>
[ 4.645660] raid1: raid set md5 active with 3 out of 3 mirrors
[ 4.645802] md5: detected capacity change from 0 to 53694496768
[ 4.645950] md: considering sdb3 ...
[ 4.646075] md: adding sdb3 ...
[ 4.646199] md: adding sda3 ...
[ 4.646323] md: adding sdc3 ...
[ 4.646527] md: created md3
[ 4.646650] md: bind<sdc3>
[ 4.646776] md: bind<sda3>
[ 4.646901] md: bind<sdb3>
[ 4.647026] md: running: <sdb3><sda3><sdc3>
[ 4.647315] raid1: raid set md3 active with 3 out of 3 mirrors
[ 4.647452] md3: detected capacity change from 0 to 53694562304
[ 4.647602] md: ... autorun DONE.
[ 4.647758] md5: unknown partition table
[ 4.691815] kjournald starting. Commit interval 5 seconds
[ 4.691821] EXT3-fs (md5): mounted filesystem with writeback data mode
[ 4.691832] VFS: Mounted root (ext3 filesystem) readonly on device 9:5.
[ 4.692209] Freeing unused kernel memory: 476k freed
[ 4.692393] Write protecting the kernel read-only data: 6144k
[ 4.692601] Freeing unused kernel memory: 448k freed
[ 4.692797] Freeing unused kernel memory: 248k freed
[ 6.486789] udev: starting version 149
[ 6.580054] rtc_cmos 00:03: RTC can wake from S4
[ 6.580121] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 6.580146] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 6.611062] md3:
[ 6.731884] sky2: driver version 1.27
[ 6.731907] sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.731916] sky2 0000:06:00.0: setting latency timer to 64
[ 6.731943] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.732024] sky2 0000:06:00.0: irq 55 for MSI/MSI-X
[ 6.732193] sky2 0000:06:00.0: eth0: addr e0:cb:4e:97:7a:09
[ 6.732205] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.732211] sky2 0000:04:00.0: setting latency timer to 64
[ 6.732231] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.732311] sky2 0000:04:00.0: irq 56 for MSI/MSI-X
[ 6.732473] sky2 0000:04:00.0: eth1: addr e0:cb:4e:97:80:fd
[ 6.744861] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.744865] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x0400-0x040f disabled]
[ 6.744867] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.752115] unknown partition table
[ 6.842496] Linux agpgart interface v0.103
[ 6.865663] [drm] Initialized drm 1.1.0 20060810
[ 6.945232] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.945290] HDA Intel 0000:00:1b.0: irq 57 for MSI/MSI-X
[ 6.945314] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.956533] [drm] radeon defaulting to kernel modesetting.
[ 6.956534] [drm] radeon kernel modesetting enabled.
[ 6.956565] radeon 0000:03:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
[ 6.956568] radeon 0000:03:00.0: setting latency timer to 64
[ 6.957286] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8).
[ 6.957428] [drm] register mmio base: 0xFBAC0000
[ 6.957429] [drm] register mmio size: 131072
[ 6.957495] ATOM BIOS: JUNIPER
[ 6.957504] [drm] Clocks initialized !
[ 6.957505] [drm] 1 Power State(s)
[ 6.957506] [drm] State 0 Default (default)
[ 6.957507] [drm] 16 PCIE Lanes
[ 6.957508] [drm] 1 Clock Mode(s)
[ 6.957509] [drm] 0 engine/memory: 850000/1200000
[ 6.957514] [drm] radeon: power management initialized
[ 6.957519] radeon 0000:03:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
[ 6.957521] radeon 0000:03:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
[ 6.957531] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 6.957532] [drm] Detected VRAM RAM=256M, BAR=256M
[ 6.957533] [drm] RAM width 128bits DDR
[ 6.957553] [TTM] Zone kernel: Available graphics memory: 6151634 kiB.
[ 6.957554] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 6.957561] [drm] radeon: 256M of VRAM memory ready
[ 6.957562] [drm] radeon: 512M of GTT memory ready.
[ 6.958913] [drm] Radeon Display Connectors
[ 6.958915] [drm] Connector 0:
[ 6.958916] [drm] DisplayPort
[ 6.958918] [drm] HPD4
[ 6.958920] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 6.958921] [drm] Encoders:
[ 6.958923] [drm] DFP1: INTERNAL_UNIPHY2
[ 6.958924] [drm] Connector 1:
[ 6.958926] [drm] HDMI-A
[ 6.958927] [drm] HPD5
[ 6.958929] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 6.958931] [drm] Encoders:
[ 6.958932] [drm] DFP2: INTERNAL_UNIPHY2
[ 6.958934] [drm] Connector 2:
[ 6.958935] [drm] DVI-I
[ 6.958936] [drm] HPD1
[ 6.958938] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 6.958940] [drm] Encoders:
[ 6.958941] [drm] DFP3: INTERNAL_UNIPHY1
[ 6.958942] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 6.958944] [drm] Connector 3:
[ 6.958945] [drm] DVI-I
[ 6.958951] [drm] HPD6
[ 6.958953] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 6.958954] [drm] Encoders:
[ 6.958955] [drm] DFP4: INTERNAL_UNIPHY
[ 6.958957] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.307599] [drm] fb mappable at 0xD0040000
[ 7.307601] [drm] vram apper at 0xD0000000
[ 7.307602] [drm] size 8294400
[ 7.307602] [drm] fb depth is 24
[ 7.307603] [drm] pitch is 7680
[ 7.316065] Console: switching to colour frame buffer device 240x67
[ 7.320027] fb0: radeondrmfb frame buffer device
[ 7.320028] registered panic notifier
[ 7.320031] [drm] Initialized radeon 2.3.0 20080528 for 0000:03:00.0 on minor 0
[ 7.321128] hda_codec: AD1989B: BIOS auto-probing.
[ 7.323402] HDA Intel 0000:03:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
[ 7.323444] HDA Intel 0000:03:00.1: irq 58 for MSI/MSI-X
[ 7.323462] HDA Intel 0000:03:00.1: setting latency timer to 64
[ 8.086540] EXT3-fs (md5): using internal journal
[ 8.362076] md: md11 stopped.
[ 8.385474] md: bind<sdd1>
[ 8.387906] md: md6 stopped.
[ 8.393334] md: bind<sdb6>
[ 8.393719] md: bind<sdc6>
[ 8.403198] md: bind<sda6>
[ 8.403778] raid1: raid set md6 active with 3 out of 3 mirrors
[ 8.403791] md6: detected capacity change from 0 to 253354939392
[ 8.404161] md6: unknown partition table
[ 8.947063] EXT3-fs (md11): error: unable to read superblock
[ 8.975182] kjournald starting. Commit interval 5 seconds
[ 8.975187] EXT3-fs (md6): warning: maximal mount count reached, running e2fsck is recommended
[ 8.995355] EXT3-fs (md6): using internal journal
[ 8.995361] EXT3-fs (md6): mounted filesystem with writeback data mode
[ 9.048862] Adding 4200992k swap on /dev/sda2. Priority:-1 extents:1 across:4200992k
[ 9.050276] Adding 4200992k swap on /dev/sdb2. Priority:-2 extents:1 across:4200992k
[ 9.051611] Adding 4200992k swap on /dev/sdc2. Priority:-3 extents:1 across:4200992k
[ 14.327600] sky2 0000:06:00.0: eth0: enabling interface
[ 16.224803] sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 20.878956] NET: Registered protocol family 10
[ 23.072866] /dev/vmmon[4159]: Module vmmon: registered with major=10 minor=165
[ 23.072874] /dev/vmmon[4159]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 23.072879] /dev/vmmon[4159]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 23.072881] /dev/vmmon[4159]: Module vmmon: initialized
[ 23.144869] /dev/vmci[4178]: VMCI: Driver initialized.
[ 23.144884] /dev/vmci[4178]: Module vmci: registered with major=10 minor=59
[ 23.144886] /dev/vmci[4178]: Module vmci: initialized
[ 23.421937] /dev/vmnet: open called by PID 4260 (vmnet-bridge)
[ 23.421944] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 23.421963] /dev/vmnet: port on hub 0 successfully opened
[ 23.421973] bridge-eth0: up
[ 23.421975] bridge-eth0: attached
[ 24.627203] /dev/vmnet: open called by PID 4267 (vmnet-dhcpd)
[ 24.627207] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 24.627219] /dev/vmnet: port on hub 1 successfully opened
[ 24.675538] /dev/vmnet: open called by PID 4269 (vmnet-netifup)
[ 24.675543] /dev/vmnet: port on hub 1 successfully opened
[ 24.715811] /dev/vmnet: open called by PID 4272 (vmnet-dhcpd)
[ 24.715815] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 24.715827] /dev/vmnet: port on hub 8 successfully opened
[ 24.807422] /dev/vmnet: open called by PID 4276 (vmnet-natd)
[ 24.807427] /dev/vmnet: port on hub 8 successfully opened
[ 24.814063] /dev/vmnet: open called by PID 4277 (vmnet-netifup)
[ 24.814069] /dev/vmnet: port on hub 8 successfully opened
[ 30.962545] eth0: no IPv6 routers present
[ 35.045016] vmnet8: no IPv6 routers present
[ 35.591626] vmnet1: no IPv6 routers present
next prev parent reply other threads:[~2010-07-06 18:13 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-02 17:56 Drives missing at boot Mark Knecht
2010-07-03 15:20 ` Mark Knecht
2010-07-03 16:01 ` Tejun Heo
2010-07-03 16:06 ` Mark Knecht
2010-07-03 16:13 ` Tejun Heo
2010-07-03 16:42 ` Mark Knecht
2010-07-05 6:30 ` Tejun Heo
2010-07-05 16:56 ` Mark Knecht
2010-07-06 6:33 ` Tejun Heo
2010-07-06 18:13 ` Mark Knecht [this message]
2010-07-07 5:50 ` Tejun Heo
2010-07-07 15:34 ` Mark Knecht
2010-07-07 15:48 ` Tejun Heo
2010-07-07 16:15 ` Mark Knecht
2010-07-07 16:19 ` Tejun Heo
2010-07-07 16:27 ` Mark Knecht
2010-07-07 17:06 ` Mark Knecht
2010-07-07 17:26 ` Tejun Heo
2010-07-07 17:32 ` Mark Knecht
2010-07-19 19:31 ` Mark Knecht
2010-07-19 21:01 ` Tejun Heo
2010-07-20 3:14 ` Paul Check
2010-07-20 14:14 ` Tejun Heo
2010-07-20 14:14 ` Tejun Heo
2010-07-20 14:53 ` Mark Knecht
2010-07-20 16:16 ` Mark Knecht
2010-07-21 20:54 ` Mark Knecht
2010-07-21 21:22 ` Paul Check
2010-07-22 12:39 ` Tejun Heo
2010-07-22 12:39 ` Tejun Heo
2010-08-02 22:07 ` Mark Knecht
2010-08-03 18:41 ` Randy Dunlap
2010-08-03 18:47 ` Mark Knecht
2010-08-03 18:55 ` Randy Dunlap
2010-08-04 16:16 ` Mark Knecht
2010-08-03 18:49 ` Jim Paris
2010-08-03 18:53 ` Mark Knecht
2010-07-20 20:52 ` Mark Knecht
2010-07-20 21:19 ` Paul Check
2010-07-20 21:26 ` Mark Knecht
2010-07-20 23:05 ` Paul Check
2010-07-03 18:56 ` Stan Hoeppner
2010-07-03 19:21 ` Mark Knecht
2010-07-03 19:42 ` Stan Hoeppner
2010-07-03 19:57 ` Mark Knecht
2010-07-03 22:31 ` Mark Knecht
2010-07-04 1:25 ` Thomas Fjellstrom
2010-07-05 6:19 ` Tejun Heo
2010-07-05 16:48 ` Mark Knecht
2010-07-05 23:59 ` Robert Hancock
2010-07-06 4:16 ` Mark Knecht
2010-07-06 6:13 ` Stan Hoeppner
2010-07-06 11:26 ` Sander
2010-07-06 6:32 ` Tejun Heo
2010-07-03 20:15 ` Gene Heskett
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AANLkTikehTO1j6Gd7Y_g32_P6Yg9KB8Z8qwbNJh10aOU@mail.gmail.com \
--to=markknecht@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.