From mboxrd@z Thu Jan  1 00:00:00 1970
From: Sagar Bijwe <sag.bijwe@gmail.com>
Date: Tue, 15 Feb 2011 14:40:28 +0530
Subject: [ath9k-devel] Progress on Ath9k HT support on Adhoc mode
In-Reply-To: <AANLkTi=Cgfpi6YWDOCh+TJ0EG8Q7=t9WWFmy7Y4FtB2Y@mail.gmail.com>
References: <AANLkTi=Cgfpi6YWDOCh+TJ0EG8Q7=t9WWFmy7Y4FtB2Y@mail.gmail.com>
Message-ID: <AANLkTimfddaZxN_hffX-b2St-OcpChmfvHRDdP9KfgLE@mail.gmail.com>
List-Id: <ath9k-devel.lists.ath9k.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: ath9k-devel@lists.ath9k.org

I would also like  to know that...
-Sagar

On Tue, Feb 15, 2011 at 2:35 PM, Baldomero Coll <baldo.ath9k@gmail.com>wrote:

> Hello,
>
> Can you please tell me how do you select one o two antennas?
>
> I'm using a similar setting than you:
> Linux kernel: 2.6.32-28-generic-pae.
> Driver: compat-wireless-2011-01-17 and iw-0.9.21 with the patch suggested
> by Alex.
> Radio card: Ubiquiti SR71x
>
> Thanks in advance,
> Baldomero
>
>>
>> Hi all,
>>
>> I would like to confirm my findings. My test platform configurations are
>> follow.
>> Board: pcengine alix3d2
>> Linux kernel: 2.6.35 from linux-wireless git
>> Driver: compat-wireless-2011-01-17 and iw-0.9.21 with the patch
>> suggested by Alex.
>> Radio card: Ubiqiti SR71a on channel 36 with HT40+
>> Measurement tool and settings: Iperf, UDP, 100Mb offered load
>>
>> Recored throughput: 50-54Mbps (one antenna); 78-80Mbps (two or three
>> antennas).
>>
>
>
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20110215/051b2569/attachment.htm