Chris, Take a look at your local.conf and see what is included on EXTRA_IMAGE_FEATURES. Removing them you will save lots of space too. Regards, -- *dS Diego Sueiro /*long live rock 'n roll*/ On Wed, Jan 26, 2011 at 9:58 PM, Tian, Kevin wrote: > > From: Chris Tapp > > Sent: Wednesday, January 26, 2011 9:09 PM > > > > I know this is probably a basic question, but I'm not having much luck ! > > > > I've built poky-image-minimal for atom-pc using the 0.9 Poky release. > > > > This gives me an ext3 rootfs of over 80MB, which doesn't sound minimal > > to me ;-) > > This is a known issue in 0.9. the switch from ipk to rpm leaves some > temporary files > in the final ext3 rootfs, which results the large size. > > > > > Can I reduce the size of the image, or is it expected to be this size? > > > > I've tried changing > > > > IMAGE_ROOTFS_SIZE_ext3 = "500000" > > This configuration option only works when it exceeds the size of generated > rootfs, > or else it will be changed implicitly to the actual size plus some extra > buffer > > > > > in atom-pc.conf to another value, but this didn't make any > > difference to the image that gets created (by re-running bitbake poky- > > image-minimal after making the above change). > > > > I've also tried using > > > > ROOT_FLASH_SIZE = "64" > > > > also without any luck. > > > > Any help would be much appreciated ! > > > > I'd suggest you to use the master to see whether it works for you. > > The alternative is to apply below commit to your 0.9 code: > > commit 5e384038cbd5035377d61a1b77ad23ab69e0cac0 > Author: Richard Purdie > Date: Wed Jan 5 18:56:47 2011 +0000 > > rootfs_rpm.bbclass: Remove temporary work files in install directory, > saving work files in install directory, saving the manifests as logfiles > into ${T} > > Signed-off-by: Richard Purdie > > diff --git a/meta/classes/rootfs_rpm.bbclass > b/meta/classes/rootfs_rpm.bbclass > index 33abe96..2f7d691 100644 > --- a/meta/classes/rootfs_rpm.bbclass > +++ b/meta/classes/rootfs_rpm.bbclass > @@ -202,8 +202,11 @@ EOF > # remove lock files > rm -f ${IMAGE_ROOTFS}${rpmlibdir}/__db.* > > - # remove resolver files and manifests > - rm -f ${IMAGE_ROOTFS}/install/install.manifest > + # Move manifests into the directory with the logs > + mv ${IMAGE_ROOTFS}/install/*.manifest ${T}/ > + > + # Remove all remaining resolver files > + rm -f ${IMAGE_ROOTFS}/install > > log_check rootfs > > Thanks > Kevin > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto >