* [PATCH] bluetooth: Add another Bluetooth part for Realtek 8852AE
@ 2021-09-27 20:43 Larry Finger
2021-09-28 3:50 ` Tedd An
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Larry Finger @ 2021-09-27 20:43 UTC (permalink / raw)
To: Marcel Holtmann, Gustavo Padovan, Johan Hedberg
Cc: linux-bluetooth, Hilda Wu, Larry Finger, Stable
This Realtek device has both wifi and BT components. The latter reports
a USB ID of 0bda:4852, which is not in the table.
The portion of /sys/kernel/debug/usb/devices pertaining to this device is
T: Bus=06 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=4852 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 60d2fce59a71..7e1e43c216ec 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -384,6 +384,8 @@ static const struct usb_device_id blacklist_table[] = {
/* Realtek 8852AE Bluetooth devices */
{ USB_DEVICE(0x0bda, 0xc852), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x0bda, 0x4852), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
/* Realtek Bluetooth devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
--
2.33.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] bluetooth: Add another Bluetooth part for Realtek 8852AE
2021-09-27 20:43 [PATCH] bluetooth: Add another Bluetooth part for Realtek 8852AE Larry Finger
@ 2021-09-28 3:50 ` Tedd An
2021-09-28 9:43 ` Marcel Holtmann
2022-08-02 16:13 ` Jonathan Weth
2 siblings, 0 replies; 4+ messages in thread
From: Tedd An @ 2021-09-28 3:50 UTC (permalink / raw)
To: Larry Finger, Marcel Holtmann, Gustavo Padovan, Johan Hedberg
Cc: linux-bluetooth, Hilda Wu, Stable
Hi Larry
On 9/27/21, 1:43 PM, "Larry Finger" <larry.finger@gmail.com on behalf of Larry.Finger@lwfinger.net> wrote:
This Realtek device has both wifi and BT components. The latter reports
a USB ID of 0bda:4852, which is not in the table.
The portion of /sys/kernel/debug/usb/devices pertaining to this device is
T: Bus=06 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=4852 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 60d2fce59a71..7e1e43c216ec 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -384,6 +384,8 @@ static const struct usb_device_id blacklist_table[] = {
/* Realtek 8852AE Bluetooth devices */
{ USB_DEVICE(0x0bda, 0xc852), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x0bda, 0x4852), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
Not able to apply patch to the bluetooth-next thus cannot run CI.
Please rebase to the tip and submit again.
/* Realtek Bluetooth devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
--
2.33.0
Regards,
Tedd
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] bluetooth: Add another Bluetooth part for Realtek 8852AE
2021-09-27 20:43 [PATCH] bluetooth: Add another Bluetooth part for Realtek 8852AE Larry Finger
2021-09-28 3:50 ` Tedd An
@ 2021-09-28 9:43 ` Marcel Holtmann
2022-08-02 16:13 ` Jonathan Weth
2 siblings, 0 replies; 4+ messages in thread
From: Marcel Holtmann @ 2021-09-28 9:43 UTC (permalink / raw)
To: Larry Finger
Cc: Gustavo F. Padovan, Johan Hedberg, linux-bluetooth, Hilda Wu, Stable
Hi Larry,
> This Realtek device has both wifi and BT components. The latter reports
> a USB ID of 0bda:4852, which is not in the table.
>
> The portion of /sys/kernel/debug/usb/devices pertaining to this device is
>
> T: Bus=06 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0bda ProdID=4852 Rev= 0.00
> S: Manufacturer=Realtek
> S: Product=Bluetooth Radio
> S: SerialNumber=00e04c000001
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
> Cc: Stable <stable@vger.kernel.org>
> ---
> drivers/bluetooth/btusb.c | 2 ++
> 1 file changed, 2 insertions(+)
patch does not apply cleanly to bluetooth-next tree.
Regards
Marcel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] bluetooth: Add another Bluetooth part for Realtek 8852AE
2021-09-27 20:43 [PATCH] bluetooth: Add another Bluetooth part for Realtek 8852AE Larry Finger
2021-09-28 3:50 ` Tedd An
2021-09-28 9:43 ` Marcel Holtmann
@ 2022-08-02 16:13 ` Jonathan Weth
2 siblings, 0 replies; 4+ messages in thread
From: Jonathan Weth @ 2022-08-02 16:13 UTC (permalink / raw)
To: larry.finger
Cc: gustavo, hildawu, johan.hedberg, linux-bluetooth, marcel, stable
Hi everyone,
>> This Realtek device has both wifi and BT components. The latter reports
>> a USB ID of 0bda:4852, which is not in the table.
>>
>> The portion of /sys/kernel/debug/usb/devices pertaining to this device is
>>
>> T: Bus=06 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
>> D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
>> P: Vendor=0bda ProdID=4852 Rev= 0.00
>> S: Manufacturer=Realtek
>> S: Product=Bluetooth Radio
>> S: SerialNumber=00e04c000001
>> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
>> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
>> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
>> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
>> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
>> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
>> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>>
>> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
>> Cc: Stable <stable@vger.kernel.org>
>> ---
>> drivers/bluetooth/btusb.c | 2 ++
>> 1 file changed, 2 insertions(+)
>
> patch does not apply cleanly to bluetooth-next tree.
Is there any progress according to this fix? I would like to help as
this prevents my bluetooth interface from working but I actually don't
know how.
Regards
Jonathan
--
Jonathan Weth
mail@jonathanweth.de
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-08-02 16:29 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-27 20:43 [PATCH] bluetooth: Add another Bluetooth part for Realtek 8852AE Larry Finger
2021-09-28 3:50 ` Tedd An
2021-09-28 9:43 ` Marcel Holtmann
2022-08-02 16:13 ` Jonathan Weth
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.