From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mms1.broadcom.com ([216.31.210.17]:2977 "EHLO mms1.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752800Ab0IKRKh convert rfc822-to-8bit (ORCPT ); Sat, 11 Sep 2010 13:10:37 -0400 From: "Henry Ptasinski" To: "Ben Hutchings" , "Greg Kroah-Hartman" cc: "Brett Rudley" , "Nohee Ko" , "linux-wireless@vger.kernel.org" Date: Sat, 11 Sep 2010 10:07:23 -0700 Subject: RE: [PATCH] brcm80211: Fix some initialisation failure paths Message-ID: References: <1284079098.5323.595.camel@localhost> In-Reply-To: <1284079098.5323.595.camel@localhost> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: linux-wireless-owner@vger.kernel.org List-ID: Reviewed, and tested with a BCM43224. Signed-off-by: Henry Ptasinski < henryp@broadcom.com> ________________________________________ From: Ben Hutchings [ben@decadent.org.uk] Sent: Thursday, September 09, 2010 5:38 PM To: Greg Kroah-Hartman Cc: Brett Rudley; Henry Ptasinski; Nohee Ko; linux-wireless@vger.kernel.org Subject: [PATCH] brcm80211: Fix some initialisation failure paths Initialise wl_info::tasklet early so that it's safe to tasklet_kill() it in wl_free(). Remove assertions from wl_free() that may not be true in case of initialisation failure. Call wl_release_fw() in case of failure after wl_request_fw(). Don't rely on wl_firmware::fw_cnt in wl_release_fw(). Signed-off-by: Ben Hutchings --- This is compile-tested only; I don't have any of the supported hardware myself. Ben. drivers/staging/brcm80211/TODO | 1 - drivers/staging/brcm80211/sys/wl_mac80211.c | 25 ++++++++++++------------- 2 files changed, 12 insertions(+), 14 deletions(-) diff --git a/drivers/staging/brcm80211/TODO b/drivers/staging/brcm80211/TODO index aa38d49..5870bca 100644 --- a/drivers/staging/brcm80211/TODO +++ b/drivers/staging/brcm80211/TODO @@ -25,7 +25,6 @@ Bugs - Various occasional asserts/hangs - Scanning during data transfer sometimes causes major slowdowns. Sometimes revcovers when scan is done, other times not. -- Driver does not handle missing firmware gracefully. - Mac80211 API not completely implemented (ie ops_bss_info_changed, ops_get_stats, etc) diff --git a/drivers/staging/brcm80211/sys/wl_mac80211.c b/drivers/staging/brcm80211/sys/wl_mac80211.c index d73ec44..3e0c450 100644 --- a/drivers/staging/brcm80211/sys/wl_mac80211.c +++ b/drivers/staging/brcm80211/sys/wl_mac80211.c @@ -837,6 +837,9 @@ static wl_info_t *wl_attach(uint16 vendor, uint16 device, ulong regs, wl->osh = osh; atomic_set(&wl->callbacks, 0); + /* setup the bottom half handler */ + tasklet_init(&wl->tasklet, wl_dpc, (ulong) wl); + #ifdef WLC_HIGH_ONLY wl->rpc_th = bcm_rpc_tp_attach(osh, NULL); if (wl->rpc_th == NULL) { @@ -905,17 +908,16 @@ static wl_info_t *wl_attach(uint16 vendor, uint16 device, ulong regs, #endif /* common load-time initialization */ - if (! - (wl->wlc = - wlc_attach((void *)wl, vendor, device, unit, wl->piomode, osh, - wl->regsva, wl->bcm_bustype, btparam, &err))) { + wl->wlc = wlc_attach((void *)wl, vendor, device, unit, wl->piomode, osh, + wl->regsva, wl->bcm_bustype, btparam, &err); +#ifndef WLC_HIGH_ONLY + wl_release_fw(wl); +#endif + if (!wl->wlc) { printf("%s: %s driver failed with code %d\n", KBUILD_MODNAME, EPI_VERSION_STR, err); goto fail; } -#ifndef WLC_HIGH_ONLY - wl_release_fw(wl); -#endif wl->pub = wlc_pub(wl->wlc); wl->pub->ieee_hw = hw; @@ -942,9 +944,6 @@ static wl_info_t *wl_attach(uint16 vendor, uint16 device, ulong regs, wlc_iovar_setint(wl->wlc, "sd_drivestrength", sd_drivestrength); #endif - /* setup the bottom half handler */ - tasklet_init(&wl->tasklet, wl_dpc, (ulong) wl); - #ifdef WLC_LOW /* register our interrupt handler */ if (request_irq(irq, wl_isr, IRQF_SHARED, KBUILD_MODNAME, wl)) { @@ -1710,11 +1709,9 @@ void wl_free(wl_info_t * wl) ASSERT(wl); #ifndef WLC_HIGH_ONLY - ASSERT(wl->irq); /* bmac does not use direct interrupt */ /* free ucode data */ if (wl->fw.fw_cnt) wl_ucode_data_free(); - ASSERT(wl->wlc); if (wl->irq) free_irq(wl->irq, wl); #endif @@ -2509,6 +2506,7 @@ static int wl_request_fw(wl_info_t * wl, struct pci_dev *pdev) status = request_firmware(&wl->fw.fw_bin[i], fw_name, device); if (status) { printf("fail to request firmware %s\n", fw_name); + wl_release_fw(wl); return status; } WL_NONE(("request fw %s\n", fw_name)); @@ -2517,6 +2515,7 @@ static int wl_request_fw(wl_info_t * wl, struct pci_dev *pdev) status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device); if (status) { printf("fail to request firmware %s\n", fw_name); + wl_release_fw(wl); return status; } wl->fw.hdr_num_entries[i] = @@ -2539,7 +2538,7 @@ void wl_ucode_free_buf(void *p) static void wl_release_fw(wl_info_t * wl) { int i; - for (i = 0; i < wl->fw.fw_cnt; i++) { + for (i = 0; i < WL_MAX_FW; i++) { release_firmware(wl->fw.fw_bin[i]); release_firmware(wl->fw.fw_hdr[i]); } -- 1.7.1