From mboxrd@z Thu Jan  1 00:00:00 1970
From: Peng Fan <peng.fan@nxp.com>
Date: Fri, 17 May 2019 02:17:19 +0000
Subject: [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2
In-Reply-To: <CAOMZO5C-9R1mxEwmxUG3n_DUymXy-S23vU589yzZ=sq63T6+Mg@mail.gmail.com>
References: <CAOMZO5C-9R1mxEwmxUG3n_DUymXy-S23vU589yzZ=sq63T6+Mg@mail.gmail.com>
Message-ID: <AM0PR04MB448175571BDD7A4C3B7EE7B7880B0@AM0PR04MB4481.eurprd04.prod.outlook.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
To: u-boot@lists.denx.de

Hi Fabio

Booting from SD3, it works for me. See below log.

"
U-Boot SPL 2019.07-rc2 (May 17 2019 - 10:24:45 +0800)
Trying to boot from MMC1


U-Boot 2019.07-rc2 (May 17 2019 - 10:24:45 +0800)

CPU:   Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU:   Automotive temperature grade (-40C to 125C)Reset cause: POR
Model: Freescale i.MX6 Quad SABRE Smart Device Board
"

Regards,
Peng.

> -----Original Message-----
> From: Fabio Estevam [mailto:festevam at gmail.com]
> Sent: 2019年5月17日 1:33
> To: Stefano Babic <sbabic@denx.de>; dl-uboot-imx <uboot-imx@nxp.com>
> Cc: Lukasz Majewski <lukma@denx.de>; Jagan Teki
> <jagan@amarulasolutions.com>; Michael Trimarchi
> <michael@amarulasolutions.com>; U-Boot-Denx <u-boot@lists.denx.de>
> Subject: Cannot boot mx6qsabred with 2019.07-rc2
> 
> Hi,
> 
> I get the following error when trying to boot mx6q sabresd with 2019.07-rc2:
> 
> U-Boot SPL 2019.07-rc2 (May 16 2019 - 14:28:55 -0300) Trying to boot from
> MMC1
> spl: could not find mmc device 0. error: -19
> SPL: failed to boot from all boot devices ### ERROR ### Please RESET the
> board ###
> 
> I haven't debugged this yet.
> 
> Does anyone have any ideas?
> 
> Thanks,
> 
> Fabio Estevam