From mboxrd@z Thu Jan  1 00:00:00 1970
From: Peng Fan <peng.fan@nxp.com>
Date: Fri, 31 May 2019 06:04:13 +0000
Subject: [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2
In-Reply-To: <CAMty3ZBjWwUddtkPSw-8BrBzwJjQKh-Sk6OOt2HFavfA7PYxEw@mail.gmail.com>
References: <CAOMZO5C-9R1mxEwmxUG3n_DUymXy-S23vU589yzZ=sq63T6+Mg@mail.gmail.com>
 <AM0PR04MB448175571BDD7A4C3B7EE7B7880B0@AM0PR04MB4481.eurprd04.prod.outlook.com>
 <CAOMZO5BwP-axMc0dRYCCPVrPgdEF6ms4Fb3a8GTyqZSo2W+d8Q@mail.gmail.com>
 <AM0PR04MB4481C2009FD8937695086EC0880B0@AM0PR04MB4481.eurprd04.prod.outlook.com>
 <CAOMZO5BMzNvoQU89jmxBK-Kot1ofd=98VkuXD8yApj6+efubtA@mail.gmail.com>
 <CAMty3ZARRzCCS61WL9dVO1WBh7GASSZy5J2cbff+_VpvkjoO=Q@mail.gmail.com>
 <CAOMZO5A97dW1Py6dg8P22C6Ch3EKdKw3NNZ5De09gARBMC6eHA@mail.gmail.com>
 <CAMty3ZBjWwUddtkPSw-8BrBzwJjQKh-Sk6OOt2HFavfA7PYxEw@mail.gmail.com>
Message-ID: <AM0PR04MB4481819C851BBEBD837BB46588190@AM0PR04MB4481.eurprd04.prod.outlook.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Jagan
> Subject: Re: Cannot boot mx6qsabred with 2019.07-rc2
> 
> On Thu, May 23, 2019 at 10:18 PM Fabio Estevam <festevam@gmail.com>
> wrote:
> >
> > On Thu, May 23, 2019 at 1:11 PM Jagan Teki <jagan@amarulasolutions.com>
> wrote:
> >
> > > Don't know whether this is SPL size issue or not? can you try
> > > SPL_OF_PLATDATA and TINY* I can see the size reduced with 64512
> > > bytes (one build issue on fdtdec_get_int undefined)
> >
> > Yes, it does not build with CONFIG_SPL_OF_PLATDATA:
> >
> > lib/built-in.o: In function `fdtdec_parse_phandle_with_args':
> > /home/fabio/u-boot/lib/fdtdec.c:788: undefined reference to
> `fdtdec_get_int'
> 
> Couldn't dig much here, would be happy someone can find this?
> 
> > drivers/built-in.o: In function `fsl_esdhc_probe':
> > /home/fabio/u-boot/drivers/mmc/fsl_esdhc.c:1480: undefined reference
> > to `fdtdec_get_int'
> > /home/fabio/u-boot/drivers/mmc/fsl_esdhc.c:1482: undefined reference
> > to `fdtdec_get_int'
> > /home/fabio/u-boot/drivers/mmc/fsl_esdhc.c:1485: undefined reference
> 
> These we can fix, by supporting platdata support into driver.
> 
> > to `fdtdec_get_int'
> > scripts/Makefile.spl:404: recipe for target 'spl/u-boot-spl' failed
> > make[1]: *** [spl/u-boot-spl] Error 1
> >
> > Thanks for the suggestions, but at this point I prefer to go with the
> > removal of CONFIG_SPL_DM.
> 
> We have 45 days to release, I think we can make these fixes quite normally
> what do you think? fsl_esdhc.c build I can mark a patch in few days if
> required.

Are you working on converting the driver to support OF_PLATDATA?

Regards,
Peng.

> 
> >
> > For 2019.07 it would be really nice if we could fix these two issues:
> >
> > 1. Allow to load a FIT image via Serial Download Protocol
> >
> > 2. Detect the SPL size overflow in build-time
> 
> 1) We are working on this, 2) can be done.