[U-Boot] [PATCH v2 2/2] board:freescale:usb: Add device-tree fixup support for xhci controller

[Sriram Dash <sriram.dash@nxp.com>]

Please find my reply inline

-----Original Message-----
From: Marek Vasut [mailto:marex at denx.de] 
Sent: Thursday, February 25, 2016 11:31 PM
To: Sriram Dash <sriram.dash@nxp.com>; u-boot at lists.denx.de
Cc: york sun <york.sun@nxp.com>; Ramneek Mehresh <ramneek.mehresh@nxp.com>; Rajesh Bhagat <rajesh.bhagat@nxp.com>
Subject: Re: [PATCH v2 2/2] board:freescale:usb: Add device-tree fixup support for xhci controller

On 02/24/2016 05:44 AM, Sriram Dash wrote:
> Enables usb device-tree fixup code to incorporate xhci controller
> 
> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@nxp.com>
> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
> ---
>  board/freescale/common/Makefile |  4 +++-
>  board/freescale/common/usb.c    | 11 +++++++++--
>  include/fdt_support.h           |  4 ++--
>  3 files changed, 14 insertions(+), 5 deletions(-)
> 
> diff --git a/board/freescale/common/Makefile 
> b/board/freescale/common/Makefile index 62de45c..8388f47 100644
> --- a/board/freescale/common/Makefile
> +++ b/board/freescale/common/Makefile
> @@ -13,7 +13,9 @@ MINIMAL=y
>  endif
>  endif
>  
> -obj-$(CONFIG_USB_EHCI_FSL) += usb.o
> +ifneq ($(filter y,$(CONFIG_USB_EHCI_FSL) $(CONFIG_USB_XHCI_FSL)),) 
> +obj-y += usb.o endif

Please just add:

obj-$(CONFIG_USB_XHCI_FSL) += usb.o

here. Kbuild takes care of duplicities.

[Sriram] 
Accepted, Will change in v3 of patch

>  ifdef MINIMAL
>  # necessary to create built-in.o
> diff --git a/board/freescale/common/usb.c 
> b/board/freescale/common/usb.c index 7a35e92..b06daa0 100644
> --- a/board/freescale/common/usb.c
> +++ b/board/freescale/common/usb.c
> @@ -23,6 +23,7 @@ static const char *fdt_usb_get_node_type(void *blob, 
> int start_offset,  {
>  	const char *compat_dr = "fsl-usb2-dr";
>  	const char *compat_mph = "fsl-usb2-mph";
> +	const char *compat_snps = "snps,dwc3";

Will you add more random variables here once you add another DT compat string for another controller? You might want to learn about C arrays :)

[Sriram] Accepted, Will change in v3 of patch


>  	const char *node_type = NULL;
>  
>  	*node_offset = fdt_node_offset_by_compatible(blob, start_offset, @@ 
> -32,8 +33,14 @@ static const char *fdt_usb_get_node_type(void *blob, int start_offset,
>  							     start_offset,
>  							     compat_dr);
>  		if (*node_offset < 0) {
> -			printf("ERROR: could not find compatible node: %s\n",
> -			       fdt_strerror(*node_offset));
> +			*node_offset = fdt_node_offset_by_compatible
> +				       (blob, start_offset, compat_snps);
> +			if (*node_offset < 0) {
> +				printf("ERROR:could not find node:%s",
> +				       fdt_strerror(*node_offset));
> +			} else {
> +				node_type = compat_snps;
> +			}
>  		} else {
>  			node_type = compat_dr;
>  		}
> diff --git a/include/fdt_support.h b/include/fdt_support.h index 
> 296add0..d34e959 100644
> --- a/include/fdt_support.h
> +++ b/include/fdt_support.h
> @@ -113,11 +113,11 @@ void fdt_fixup_qe_firmware(void *fdt);
>   */
>  int fdt_fixup_display(void *blob, const char *path, const char 
> *display);
>  
> -#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
> +#if defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL)

This change looks unrelated.

[Sriram] fdt_fixup_dr_usb is currently for fixing device tree for EHCI. We are planning to use this 
for XHCI also. 

>  void fdt_fixup_dr_usb(void *blob, bd_t *bd);  #else  static inline 
> void fdt_fixup_dr_usb(void *blob, bd_t *bd) {} -#endif /* 
> defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
> +#endif /* defined(CONFIG_USB_EHCI_FSL) || 
> +defined(CONFIG_USB_XHCI_FSL) */
>  
>  #if defined(CONFIG_SYS_FSL_SEC_COMPAT)
>  void fdt_fixup_crypto_node(void *blob, int sec_rev);
>