From mboxrd@z Thu Jan  1 00:00:00 1970
From: Qianyu Gong <qianyu.gong@nxp.com>
Date: Tue, 26 Jan 2016 05:23:55 +0000
Subject: [U-Boot] [Patch V3 2/3] fm: fdt: Move fman ucode fixup to Fman
 driver code
In-Reply-To: <1453742223.27129.10.camel@buserror.net>
References: <1453721834-7772-1-git-send-email-Qianyu.Gong@nxp.com>
 <1453721834-7772-2-git-send-email-Qianyu.Gong@nxp.com>
 <1453742223.27129.10.camel@buserror.net>
Message-ID: <AM2PR04MB09641171C71CBA883A67B86DE7D80@AM2PR04MB0964.eurprd04.prod.outlook.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de


> -----Original Message-----
> From: Scott Wood [mailto:oss at buserror.net]
> Sent: Tuesday, January 26, 2016 1:17 AM
> To: Qianyu Gong <qianyu.gong@nxp.com>; u-boot at lists.denx.de
> Cc: B07421 at freescale.com; Shaohui Xie <shaohui.xie@nxp.com>
> Subject: Re: [U-Boot] [Patch V3 2/3] fm: fdt: Move fman ucode fixup to Fman
> driver code
> 
> On Mon, 2016-01-25 at 19:37 +0800, Gong Qianyu wrote:
> > Both Freescale Layerscape and powerpc/mpc85xx platforms are using
> > fdt_fixup_fman_firmware() to insert Fman ucode blob into the device
> > tree. So move the function to driver code.
> >
> > Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
> > ---
> > V3:
> >  - Remove file changes about "qe.h".
> >    (Should be put in the first patch of this patchset)
> > V2:
> >  - New patch.
> >
> >  arch/powerpc/cpu/mpc85xx/fdt.c | 125
> > ++------------------------------------
> > -
> >  drivers/net/fm/Makefile        |   1 +
> >  drivers/net/fm/fdt.c           | 129
> > +++++++++++++++++++++++++++++++++++++++++
> >  include/fsl_fman.h             |   1 +
> >  4 files changed, 136 insertions(+), 120 deletions(-)
> 
> Again, pass -M -C to git format-patch.
> 
> -Scott

I don't understand but I've already used "git format-patch -M -C --stat ...".

Regards,
Qianyu