From mboxrd@z Thu Jan 1 00:00:00 1970 From: york sun Date: Thu, 5 Jan 2017 16:28:27 +0000 Subject: [U-Boot] [PATCH 00/24] Lift mpc85xx config options to Kconfig References: <1482943430-10231-1-git-send-email-york.sun@nxp.com> <20170105132814.GA24312@bill-the-cat> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 01/05/2017 05:28 AM, Tom Rini wrote: > On Wed, Dec 28, 2016 at 08:43:26AM -0800, York Sun wrote: > >> In this set, more mpc85xx config options are moved into Kconfig, including >> some shared configuration for DDR, crypto, mmc, etc. >> >> York Sun (24): >> powerpc: E500: Move CONFIG_E500 and CONFIG_E500MC to Kconfig >> powerpc: mpc85xx: Move CONFIG_SYS_NUM_TLBCAMS to Kconfig >> powerpc: mpc85xx: Move CONFIG_SYS_PPC_E500_DEBUG_TLB to Kconfig >> crypto: Move SYS_FSL_SEC_COMPAT into driver Kconfig >> crypto: Move CONFIG_SYS_FSL_SEC_LE and _BE to Kconfig >> powerpc: mpc85xx: Remove variant SoCs T1020/T1022/T1013/T1014 >> powerpc: T1023RDB: Remove macro CONFIG_T1023RDB >> powerpc: T1024RDB: Remove macro CONFIG_T1024RDB >> powerpc: T1040QDS: Remove macro CONFIG_T1040QDS >> powerpc: T2080QDS: Remove macro T2080QDS >> powerpc: T2080RDB: Remove macro CONFIG_T2080RDB >> powerpc: T2081QDS: Remove macro T2081QDS >> powerpc: T104xQDS: Remove macro CONFIG_T104xD4QDS >> fsl_ddr: Move DDR config options to driver Kconfig >> arm: layerscape: Move CONFIG_SYS_FSL_ERRATUM_* to Kconfig >> mmc: move CONFIG_SYS_FSL_ERRATUM_ESDHC* to Kconfig >> powerpc: mpc85xx: Move CONFIG_SYS_FSL_ERRATUM_* to Kconfig >> ddr: fsl: Move macro CONFIG_NUM_DDR_CONTROLLERS to Kconfig >> ddr: fsl: Merge macro CONFIG_NUM_DDR_CONTROLLERS and >> CONFIG_SYS_NUM_DDR_CTRLS >> ddr: fsl: Move CONFIG_SYS_FSL_DDR_VER to Kconfig >> powerpc: mpc85xx: Remove unused ifdef in config header >> powerpc: E6500: Move macro CONFIG_E6500 to Kconfig >> powerpc: mpc85xx: Move CONFIG_SYS_FSL_QORIQ_CHASSIS* to Kconfig >> powerpc: mpc85xx: Move macro CONFIG_SYS_PPC64 to Kconfig > > There were a few minor problems in this series which I fixed up. The > only remaining "issue" here is that sbc8641d has a ~3KiB size increase. > This is due to the issue that previously it did _not_ define > CONFIG_SYS_FSL_DDR2 but only CONFIG_SYS_FSL_DDR_86XX and that was a > valid build. Now that CONFIG_SYS_FSL_DDR2 is set too, other files are > being included and linked. > Thanks, Tom. I will look into SBC8641. York