From mboxrd@z Thu Jan  1 00:00:00 1970
From: york sun <york.sun@nxp.com>
Date: Wed, 12 Oct 2016 03:36:07 +0000
Subject: [U-Boot] [PATCH] board/ls2080qds: add the procedure to deply
	QSPI image.
References: <1476165141-10564-1-git-send-email-yao.yuan@freescale.com>
 <AM4PR0401MB173236BD57140A1A2B11440A9ADA0@AM4PR0401MB1732.eurprd04.prod.outlook.com>
 <DB6PR0401MB2407CCF32934637D82E909B589DD0@DB6PR0401MB2407.eurprd04.prod.outlook.com>
Message-ID: <AM4PR0401MB17325BA0F6164BC3121A2F1A9ADD0@AM4PR0401MB1732.eurprd04.prod.outlook.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 10/11/2016 08:00 PM, Yao Yuan wrote:
>>
>> Yuan Yao,
>>
>> I think the procedure can be applied to many of our boards with QSPI, right? It
>> may be better to move this information out of ls2080aqds.
>>
>
> Hi York,
>
> Yes, but a little difference for "CCSR  write" for different boards.
> But the "CCSR write" should be wrote into uboot code or cw.
> So, should I remove the notes for "CCSR  write" and then move this information for
>  all the boards which support QSPI boot?
>

I think you can put the common practice together with specific examples 
for LS2080A, and other SoCs.

York