From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bhaskar U Subject: RE: [PATCH v2 1/1] arm64: Add DTS support for FSL's LS1012A SoC Date: Fri, 30 Sep 2016 11:38:13 +0000 Message-ID: References: <1472207241-18461-1-git-send-email-Bhaskar.Upadhaya@nxp.com> <20160829095239.GM30790@tiger> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20160829095239.GM30790@tiger> Content-Language: en-US List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Shawn Guo Cc: "devicetree@vger.kernel.org" , Pratiyush Srivastava , Stuart Yoder , "oss@buserror.net" , Prabhakar Kushwaha , "linux-devel@gforge.freescale.net" , "linux-arm-kernel@lists.infradead.org" List-Id: devicetree@vger.kernel.org >-----Original Message----- >From: Shawn Guo [mailto:shawnguo@kernel.org] >Sent: Monday, August 29, 2016 3:23 PM >To: Bhaskar U >Cc: devicetree@vger.kernel.org; Stuart Yoder ; >oss@buserror.net; Prabhakar Kushwaha ; linux- >devel@gforge.freescale.net; Pratiyush Srivastava >; linux-arm-kernel@lists.infradead.org >Subject: Re: [PATCH v2 1/1] arm64: Add DTS support for FSL's LS1012A SoC > >On Fri, Aug 26, 2016 at 03:57:21PM +0530, Bhaskar Upadhaya wrote: >> Add the device tree support for FSL LS1012A SoC. >> Following levels of DTSI/DTS files have been created for the LS1012A >> SoC family: >> >> - fsl-ls1012a.dtsi: >> DTS-Include file for FSL LS1012A SoC. >> >> - fsl-ls1012a-frdm.dts: >> DTS file for FSL LS1012A FRDM board. >> >> - fsl-ls1012a-qds.dts: >> DTS file for FSL LS1012A QDS board. >> >> - fsl-ls1012a-rdb.dts: >> DTS file for FSL LS1012A RDB board. >> >> Changes vs version1: >> - Consistent Licensing for dts files >> - Removed the PFE node >> - Update reset node with reboot node >> - Update clocks property in codec node >> - Update regulators node >> - Update timer node >> - Update compatible property of clockgen with "fsl,ls1012a-clockgen" >only >> - Update compatible property of scfg with "fsl,ls1012a-scfg" only >> - Update compatible property with proper ordering in tmu node >> >> Signed-off-by: Prabhakar Kushwaha >> Signed-off-by: Pratiyush Mohan Srivastava >> >> Signed-off-by: Bhaskar Upadhaya >> --- >> arch/arm64/boot/dts/freescale/Makefile | 3 + >> arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 150 +++++++ >> arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 180 ++++++++ >> arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 79 ++++ >> arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 480 >+++++++++++++++++++++ >> 5 files changed, 892 insertions(+) >> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts >> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts >> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts >> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi >> >> diff --git a/arch/arm64/boot/dts/freescale/Makefile >> b/arch/arm64/boot/dts/freescale/Makefile >> index 1b7783d..3503c46 100644 >> --- a/arch/arm64/boot/dts/freescale/Makefile >> +++ b/arch/arm64/boot/dts/freescale/Makefile >> @@ -1,3 +1,6 @@ >> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb >> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb >> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb > >Please try to keep the list sort alphabetically. Ok will make the sequence like below dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb > >> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb >> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb >> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb diff --git >> a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts >> b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts >> new file mode 100644 >> index 0000000..dc6df47 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts >> @@ -0,0 +1,150 @@ >> +/* >> + * Device Tree file for Freescale Layerscape-1012A family SoC. >> + * >> + * Copyright 2016, Freescale Semiconductor >> + * >> + * This file is dual-licensed: you can use it either under the terms >> + * of the GPLv2 or the X11 license, at your option. Note that this >> +dual >> + * licensing only applies to this file, and not this project as a >> + * whole. >> + * >> + * a) This library is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of the >> + * License, or (at your option) any later version. >> + * >> + * This library is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * Or, alternatively, >> + * >> + * b) Permission is hereby granted, free of charge, to any person >> + * obtaining a copy of this software and associated documentation >> + * files (the "Software"), to deal in the Software without >> + * restriction, including without limitation the rights to use, >> + * copy, modify, merge, publish, distribute, sublicense, and/or >> + * sell copies of the Software, and to permit persons to whom the >> + * Software is furnished to do so, subject to the following >> + * conditions: >> + * >> + * The above copyright notice and this permission notice shall be >> + * included in all copies or substantial portions of the Software. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY >KIND, >> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE >WARRANTIES >> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND >> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT >> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, >> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE >OR >> + * OTHER DEALINGS IN THE SOFTWARE. >> + */ >> +/dts-v1/; >> + >> +#include "fsl-ls1012a.dtsi" >> + >> +/ { >> + model = "LS1012A Freedom Board"; >> + compatible = "fsl,ls1012a-frdm", "fsl,ls1012a"; >> + >> + aliases { >> + crypto = &crypto; >> + }; >> + >> + sys_mclk: clock-mclk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <25000000>; >> + }; >> + >> + sound { >> + compatible = "simple-audio-card"; >> + simple-audio-card,format = "i2s"; >> + simple-audio-card,widgets = >> + "Microphone", "Microphone Jack", >> + "Headphone", "Headphone Jack", >> + "Speaker", "Speaker Ext", >> + "Line", "Line In Jack"; >> + simple-audio-card,routing = >> + "MIC_IN", "Microphone Jack", >> + "Microphone Jack", "Mic Bias", >> + "LINE_IN", "Line In Jack", >> + "Headphone Jack", "HP_OUT", >> + "Speaker Ext", "LINE_OUT"; >> + >> + simple-audio-card,cpu { >> + sound-dai = <&sai2>; >> + frame-master; >> + bitclock-master; >> + }; >> + >> + simple-audio-card,codec { >> + sound-dai = <&codec>; >> + frame-master; >> + bitclock-master; >> + system-clock-frequency = <25000000>; >> + }; >> + }; >> +}; >> + >> +&qspi { >> + num-cs = <2>; >> + bus-num = <0>; >> + status = "disabled"; > >Why is it being disabled? Ok, will change like below. status = "okay"; > >> + fsl,ddr-sampling-point = <4>; > >I do not find the bindings for this property, neither how driver supports it. Yes the QSPI DDR mode is not yet up-streamed, so I will remove this property as of now. > >> + >> + qflash0: s25fs512s@0 { >> + compatible = "spansion,m25p80"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + spi-max-frequency = <20000000>; >> + m25p,fast-read; >> + reg = <0>; >> + }; >> +}; >> + >> +&i2c0 { >> + status = "okay"; >> + >> + codec: sgtl5000@a { >> + #sound-dai-cells = <0>; >> + compatible = "fsl,sgtl5000"; >> + reg = <0xa>; >> + VDDA-supply = <®_1p8v>; >> + VDDIO-supply = <®_1p8v>; >> + clocks = <&sys_mclk>; >> + }; >> +}; >> + >> +&duart0 { >> + status = "okay"; >> +}; >> + >> +&esdhc0 { >> + status = "disabled"; > >We prefer to disable devices which have board level options by default in >.dtsi, and enable them per availability in .dts. Ok , will make the status as okay i.e. status = "okay"; > >> +}; >> + >> +&esdhc1 { >> + status = "disabled"; >> +}; >> + >> +&sai2 { >> + status = "disabled"; >> +}; >> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts >> b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts >> new file mode 100644 >> index 0000000..382d070 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts >> @@ -0,0 +1,180 @@ >> +/* >> + * Device Tree file for Freescale Layerscape-1012A family SoC. >> + * >> + * Copyright 2016, Freescale Semiconductor >> + * >> + * This file is dual-licensed: you can use it either under the terms >> + * of the GPLv2 or the X11 license, at your option. Note that this >> +dual >> + * licensing only applies to this file, and not this project as a >> + * whole. >> + * >> + * a) This library is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of the >> + * License, or (at your option) any later version. >> + * >> + * This library is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * Or, alternatively, >> + * >> + * b) Permission is hereby granted, free of charge, to any person >> + * obtaining a copy of this software and associated documentation >> + * files (the "Software"), to deal in the Software without >> + * restriction, including without limitation the rights to use, >> + * copy, modify, merge, publish, distribute, sublicense, and/or >> + * sell copies of the Software, and to permit persons to whom the >> + * Software is furnished to do so, subject to the following >> + * conditions: >> + * >> + * The above copyright notice and this permission notice shall be >> + * included in all copies or substantial portions of the Software. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY >KIND, >> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE >WARRANTIES >> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND >> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT >> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, >> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE >OR >> + * OTHER DEALINGS IN THE SOFTWARE. >> + */ >> +/dts-v1/; >> + >> +#include "fsl-ls1012a.dtsi" >> + >> +/ { >> + model = "LS1012A QDS Board"; >> + compatible = "fsl,ls1012a-qds", "fsl,ls1012a"; >> + >> + aliases { >> + crypto = &crypto; >> + }; >> + >> + sys_mclk: clock-mclk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <24576000>; >> + }; >> + >> + regulators { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg_3p3v: regulator@0 { >> + compatible = "regulator-fixed"; >> + reg = <0x0>; >> + regulator-name = "3P3V"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-always-on; >> + }; >> + }; >> + >> + sound { >> + compatible = "simple-audio-card"; >> + simple-audio-card,format = "i2s"; >> + simple-audio-card,widgets = >> + "Microphone", "Microphone Jack", >> + "Headphone", "Headphone Jack", >> + "Speaker", "Speaker Ext", >> + "Line", "Line In Jack"; >> + simple-audio-card,routing = >> + "MIC_IN", "Microphone Jack", >> + "Microphone Jack", "Mic Bias", >> + "LINE_IN", "Line In Jack", >> + "Headphone Jack", "HP_OUT", >> + "Speaker Ext", "LINE_OUT"; >> + >> + simple-audio-card,cpu { >> + sound-dai = <&sai2>; >> + frame-master; >> + bitclock-master; >> + }; >> + >> + simple-audio-card,codec { >> + sound-dai = <&codec>; >> + frame-master; >> + bitclock-master; >> + system-clock-frequency = <24576000>; >> + }; >> + }; >> +}; >> + >> +&dspi0 { >> + bus-num = <0>; >> + status = "okay"; >> + >> + flash@0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "n25q128a11", "jedec,spi-nor"; /* 16MB */ >> + reg = <0>; >> + spi-max-frequency = <10000000>; /* input clock */ >> + }; >> + >> + flash@1 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "sst,sst25wf040b", "jedec,spi-nor"; /* 512KB */ >> + reg = <1>; >> + spi-max-frequency = <35000000>; /* input clock */ >> + }; >> + >> + flash@2 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "eon,en25s64", "jedec,spi-nor"; /* 8MB */ >> + reg = <2>; >> + spi-max-frequency = <35000000>; /* input clock */ >> + }; >> +}; >> + >> +&qspi { >> + num-cs = <2>; >> + bus-num = <0>; >> + status = "disabled"; >> + >> + qflash0: s25fs512s@0 { >> + compatible = "spansion,m25p80"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + spi-max-frequency = <20000000>; >> + m25p,fast-read; >> + reg = <0>; >> + }; >> +}; >> + >> +&i2c0 { >> + status = "okay"; > >Please have a newline between property list and sub-node. OK > >> + pca9547@77 { >> + compatible = "nxp,pca9547"; >> + reg = <0x77>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + i2c@4 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x4>; >> + >> + codec: sgtl5000@a { >> + #sound-dai-cells = <0>; >> + compatible = "fsl,sgtl5000"; >> + reg = <0xa>; >> + VDDA-supply = <®_3p3v>; >> + VDDIO-supply = <®_3p3v>; >> + clocks = <&sys_mclk>; >> + }; >> + }; >> + }; >> +}; >> + >> +&duart0 { >> + status = "okay"; >> +}; >> + >> +&sai2 { >> + status = "disabled"; >> +}; >> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts >> b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts >> new file mode 100644 >> index 0000000..b609032 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts >> @@ -0,0 +1,79 @@ >> +/* >> + * Device Tree file for Freescale Layerscape-1012A family SoC. >> + * >> + * Copyright 2016, Freescale Semiconductor >> + * >> + * This file is dual-licensed: you can use it either under the terms >> + * of the GPLv2 or the X11 license, at your option. Note that this >> +dual >> + * licensing only applies to this file, and not this project as a >> + * whole. >> + * >> + * a) This library is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of the >> + * License, or (at your option) any later version. >> + * >> + * This library is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * Or, alternatively, >> + * >> + * b) Permission is hereby granted, free of charge, to any person >> + * obtaining a copy of this software and associated documentation >> + * files (the "Software"), to deal in the Software without >> + * restriction, including without limitation the rights to use, >> + * copy, modify, merge, publish, distribute, sublicense, and/or >> + * sell copies of the Software, and to permit persons to whom the >> + * Software is furnished to do so, subject to the following >> + * conditions: >> + * >> + * The above copyright notice and this permission notice shall be >> + * included in all copies or substantial portions of the Software. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY >KIND, >> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE >WARRANTIES >> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND >> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT >> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, >> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE >OR >> + * OTHER DEALINGS IN THE SOFTWARE. >> + */ >> +/dts-v1/; >> + >> +#include "fsl-ls1012a.dtsi" >> + >> +/ { >> + model = "LS1012A RDB Board"; >> + compatible = "fsl,ls1012a-rdb", "fsl,ls1012a"; >> + >> + aliases { >> + crypto = &crypto; >> + }; >> +}; >> + >> +&qspi { >> + num-cs = <2>; >> + bus-num = <0>; >> + status = "disabled"; >> + fsl,ddr-sampling-point = <4>; >> + >> + qflash0: s25fs512s@0 { >> + compatible = "spansion,m25p80"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + spi-max-frequency = <20000000>; >> + m25p,fast-read; >> + reg = <0>; >> + }; >> +}; >> + >> +&i2c0 { >> + status = "okay"; >> +}; >> + >> +&duart0 { >> + status = "okay"; >> +}; >> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi >> b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi >> new file mode 100644 >> index 0000000..80fe028 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi >> @@ -0,0 +1,480 @@ >> +/* >> + * Device Tree Include file for Freescale Layerscape-1012A family SoC. >> + * >> + * Copyright 2016, Freescale Semiconductor >> + * >> + * This file is dual-licensed: you can use it either under the terms >> + * of the GPLv2 or the X11 license, at your option. Note that this >> +dual >> + * licensing only applies to this file, and not this project as a >> + * whole. >> + * >> + * a) This library is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of the >> + * License, or (at your option) any later version. >> + * >> + * This library is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * Or, alternatively, >> + * >> + * b) Permission is hereby granted, free of charge, to any person >> + * obtaining a copy of this software and associated documentation >> + * files (the "Software"), to deal in the Software without >> + * restriction, including without limitation the rights to use, >> + * copy, modify, merge, publish, distribute, sublicense, and/or >> + * sell copies of the Software, and to permit persons to whom the >> + * Software is furnished to do so, subject to the following >> + * conditions: >> + * >> + * The above copyright notice and this permission notice shall be >> + * included in all copies or substantial portions of the Software. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY >KIND, >> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE >WARRANTIES >> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND >> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT >> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, >> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE >OR >> + * OTHER DEALINGS IN THE SOFTWARE. >> + */ >> + >> +#include >> + >> +/ { >> + compatible = "fsl,ls1012a"; >> + interrupt-parent = <&gic>; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + >> + cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + cpu0: cpu@0 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53"; >> + reg = <0x0 0x0>; > >This doesn't match the #address-cells property of 'cpus' node. Ok will make as reg = <0x0>; > >> + clocks = <&clockgen 1 0>; >> + #cooling-cells = <2>; >> + }; >> + }; >> + >> + sysclk: sysclk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <100000000>; >> + clock-output-names = "sysclk"; >> + }; >> + >> + timer { >> + compatible = "arm,armv8-timer"; >> + interrupts = <1 13 0x1>, /* Physical Secure PPI */ >> + <1 14 0x1>, /* Physical Non-Secure PPI */ >> + <1 11 0x1>, /* Virtual PPI */ >> + <1 10 0x1>; /* Hypervisor PPI */ > >Can we use the constant defined in >dt-bindings/interrupt-controller/irq.h to make them a bit more readable? OK, will include the #include in fsl-ls1012a.dtsi and edit the interrupts like below interrupts = <1 13 IRQ_TYPE_EDGE_RISING>, /* Physical Secure PPI */ <1 14 IRQ_TYPE_EDGE_RISING>, /* Physical Non-Secure PPI */ <1 11 IRQ_TYPE_EDGE_RISING>, /* Virtual PPI */ <1 10 IRQ_TYPE_EDGE_RISING>; /* Hypervisor PPI */ > >> + }; >> + >> + pmu { >> + compatible = "arm,armv8-pmuv3"; >> + interrupts = <0 106 0x4>; >> + }; >> + >> + gic: interrupt-controller@1400000 { >> + compatible = "arm,gic-400"; >> + #interrupt-cells = <3>; >> + interrupt-controller; >> + reg = <0x0 0x1401000 0 0x1000>, /* GICD */ >> + <0x0 0x1402000 0 0x2000>, /* GICC */ >> + <0x0 0x1404000 0 0x2000>, /* GICH */ >> + <0x0 0x1406000 0 0x2000>; /* GICV */ >> + interrupts = <1 9 0xf08>; >> + }; >> + >> + soc { >> + compatible = "simple-bus"; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + >> + clockgen: clocking@1ee1000 { >> + compatible = "fsl,ls1012a-clockgen"; > >The compatible cannot be found in binding docs. Still not clear whether we need to add "compatible = "fsl,ls1012a-clockgen";" in Documentation/devicetree/bindings/clock/qoriq-clock.txt as there are contradictory thoughts that whether we need to add each compatible string in the bindings or not ? > >> + reg = <0x0 0x1ee1000 0x0 0x1000>; >> + #clock-cells = <2>; >> + clocks = <&sysclk>; >> + }; >> + >> + scfg: scfg@1570000 { >> + compatible = "fsl,ls1012a-scfg", "syscon"; > >Ditto Same clarification needed that whether we need to add each compatible string in the bindings or not ? If we need to add I will add [compatible = "fsl,ls1012a-scfg", "syscon";] in Documentation/devicetree/bindings/arm/fsl.txt > >> + reg = <0x0 0x1570000 0x0 0x10000>; >> + big-endian; >> + }; >> + >> + dcfg: dcfg@1ee0000 { >> + compatible = "fsl,ls1012a-dcfg", >> + "fsl,ls1043a-dcfg", > >If these compatibles are not documented or used, we can drop them? I guess we >only need "syscon" to get it work? Will remove "fsl,ls1043a-dcfg" from here. > >> + "syscon"; >> + reg = <0x0 0x1ee0000 0x0 0x10000>; >> + big-endian; >> + }; >> + >> + crypto: crypto@1700000 { >> + compatible = "fsl,sec-v5.4", "fsl,sec-v5.0", >> + "fsl,sec-v4.0"; >> + fsl,sec-era = <8>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges = <0x0 0x00 0x1700000 0x100000>; >> + reg = <0x00 0x1700000 0x0 0x100000>; >> + interrupts = <0 75 0x4>; >> + >> + sec_jr0: jr@10000 { >> + compatible = "fsl,sec-v5.4-job-ring", >> + "fsl,sec-v5.0-job-ring", >> + "fsl,sec-v4.0-job-ring"; >> + reg = <0x10000 0x10000>; >> + interrupts = <0 71 0x4>; >> + }; >> + >> + sec_jr1: jr@20000 { >> + compatible = "fsl,sec-v5.4-job-ring", >> + "fsl,sec-v5.0-job-ring", >> + "fsl,sec-v4.0-job-ring"; >> + reg = <0x20000 0x10000>; >> + interrupts = <0 72 0x4>; >> + }; >> + >> + sec_jr2: jr@30000 { >> + compatible = "fsl,sec-v5.4-job-ring", >> + "fsl,sec-v5.0-job-ring", >> + "fsl,sec-v4.0-job-ring"; >> + reg = <0x30000 0x10000>; >> + interrupts = <0 73 0x4>; >> + }; >> + >> + sec_jr3: jr@40000 { >> + compatible = "fsl,sec-v5.4-job-ring", >> + "fsl,sec-v5.0-job-ring", >> + "fsl,sec-v4.0-job-ring"; >> + reg = <0x40000 0x10000>; >> + interrupts = <0 74 0x4>; >> + }; >> + }; >> + >> + reboot { >> + compatible ="syscon-reboot"; >> + regmap = <&dcfg>; >> + offset = <0xb0>; >> + mask = <0x02>; >> + }; > >It might make more sense to put it directly under root like what fsl-ls1043a.dtsi >does. Ok, will follow the way fsl-ls1043a.dtsi does. > >> + >> + rcpm: rcpm@1ee2000 { >> + compatible = "fsl,ls1012a-rcpm"; > >Undocumented/unsupported bindings? That again need confirmation that whether we need to add each compatible string in bindings ?. If we need to add, I will add in Documentation/devicetree/bindings/soc/fsl/rcpm.txt > >> + reg = <0x0 0x1ee2000 0x0 0x10000>; >> + }; >> + >> + esdhc0: esdhc@1560000 { >> + compatible = "fsl,ls1012a-esdhc0", "fsl,esdhc"; >> + reg = <0x0 0x1560000 0x0 0x10000>; >> + interrupts = <0 62 0x4>; >> + clock-frequency = <0>; > >What does a zero of clock-frequency mean? The u-boot will fix up the clock-frequency property with the correct value. So we can drop this property. > >> + voltage-ranges = <1800 1800 3300 3300>; >> + sdhci,auto-cmd12; >> + big-endian; >> + bus-width = <4>; >> + }; >> + >> + esdhc1: esdhc@1580000 { >> + compatible = "fsl,ls1012a-esdhc1", "fsl,esdhc"; >> + reg = <0x0 0x1580000 0x0 0x10000>; >> + interrupts = <0 65 0x4>; >> + clock-frequency = <0>; >> + voltage-ranges = <1800 1800 3300 3300>; >> + sdhci,auto-cmd12; >> + big-endian; >> + bus-width = <4>; >> + }; >> + >> + dspi0: dspi@2100000 { >> + compatible = "fsl,ls1012a-dspi", >> + "fsl,ls1043a-dspi", >> + "fsl,ls1021a-v1.0-dspi"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x0 0x2100000 0x0 0x10000>; >> + interrupts = <0 64 0x4>; >> + clock-names = "dspi"; >> + clocks = <&clockgen 4 0>; >> + spi-num-chipselects = <5>; >> + big-endian; >> + status = "enabled"; >> + }; >> + >> + qspi: quadspi@1550000 { >> + compatible = "fsl,ls1012a-qspi", >> + "fsl,ls1043a-qspi", >> + "fsl,ls1021a-qspi"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x0 0x1550000 0x0 0x10000>, >> + <0x0 0x40000000 0x0 0x4000000>; >> + reg-names = "QuadSPI", "QuadSPI-memory"; >> + interrupts = <0 99 0x4>; >> + clock-names = "qspi_en", "qspi"; >> + clocks = <&clockgen 4 0>, <&clockgen 4 0>; >> + big-endian; >> + amba-base = <0x42000000>; > >I can not find this property in any bindings doc. Amba-base is no longer used for QSPI driver in kernel, So I will remove this property. > >> + }; >> + >> + tmu: tmu@1f00000 { >> + compatible = "fsl,ls1012a-tmu", "fsl,qoriq-tmu"; >> + reg = <0x0 0x1f00000 0x0 0x10000>; >> + interrupts = <0 33 0x4>; >> + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; >> + fsl,tmu-calibration = <0x00000000 0x00000026 >> + 0x00000001 0x0000002d >> + 0x00000002 0x00000032 >> + 0x00000003 0x00000039 >> + 0x00000004 0x0000003f >> + 0x00000005 0x00000046 >> + 0x00000006 0x0000004d >> + 0x00000007 0x00000054 >> + 0x00000008 0x0000005a >> + 0x00000009 0x00000061 >> + 0x0000000a 0x0000006a >> + 0x0000000b 0x00000071 >> + > >Drop the newline. Ok > >> + 0x00010000 0x00000025 >> + 0x00010001 0x0000002c >> + 0x00010002 0x00000035 >> + 0x00010003 0x0000003d >> + 0x00010004 0x00000045 >> + 0x00010005 0x0000004e >> + 0x00010006 0x00000057 >> + 0x00010007 0x00000061 >> + 0x00010008 0x0000006b >> + 0x00010009 0x00000076 >> + > >Ditto OK > >> + 0x00020000 0x00000029 >> + 0x00020001 0x00000033 >> + 0x00020002 0x0000003d >> + 0x00020003 0x00000049 >> + 0x00020004 0x00000056 >> + 0x00020005 0x00000061 >> + 0x00020006 0x0000006d >> + > >Ditto OK > >> + 0x00030000 0x00000021 >> + 0x00030001 0x0000002a >> + 0x00030002 0x0000003c >> + 0x00030003 0x0000004e>; >> + big-endian; >> + #thermal-sensor-cells = <1>; >> + }; >> + >> + thermal-zones { >> + cpu_thermal: cpu-thermal { >> + polling-delay-passive = <1000>; >> + polling-delay = <5000>; >> + > >Ditto OK > >> + thermal-sensors = <&tmu 0>; >> + >> + trips { >> + cpu_alert: cpu-alert { >> + temperature = <85000>; >> + hysteresis = <2000>; >> + type = "passive"; >> + }; > >Have a newline between nodes. OK > >> + cpu_crit: cpu-crit { >> + temperature = <95000>; >> + hysteresis = <2000>; >> + type = "critical"; >> + }; >> + }; >> + >> + cooling-maps { >> + map0 { >> + trip = <&cpu_alert>; >> + cooling-device = >> + <&cpu0 >THERMAL_NO_LIMIT >> + THERMAL_NO_LIMIT>; >> + }; >> + }; >> + }; >> + }; >> + >> + i2c0: i2c@2180000 { >> + compatible = "fsl,vf610-i2c"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x0 0x2180000 0x0 0x10000>; >> + interrupts = <0 56 0x4>; >> + clock-names = "i2c"; > >This property is not needed. Ok, will remove this > >> + clocks = <&clockgen 4 0>; >> + status = "disabled"; >> + }; >> + >> + i2c1: i2c@2190000 { >> + compatible = "fsl,vf610-i2c"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x0 0x2190000 0x0 0x10000>; >> + interrupts = <0 57 0x4>; >> + clock-names = "i2c"; > >Ditto Ok, will remove this > >> + clocks = <&clockgen 4 0>; >> + status = "disabled"; >> + }; >> + >> + >> + duart0: serial@21c0500 { >> + compatible = "fsl,ns16550", "ns16550a"; >> + reg = <0x00 0x21c0500 0x0 0x100>; >> + interrupts = <0 54 0x4>; >> + clocks = <&clockgen 4 0>; >> + }; >> + >> + duart1: serial@21c0600 { >> + compatible = "fsl,ns16550", "ns16550a"; >> + reg = <0x00 0x21c0600 0x0 0x100>; >> + interrupts = <0 54 0x4>; >> + clocks = <&clockgen 4 0>; >> + }; >> + >> + gpio0: gpio@2300000 { >> + compatible = "fsl,qoriq-gpio"; >> + reg = <0x0 0x2300000 0x0 0x10000>; >> + interrupts = <0 66 0x4>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpio1: gpio@2310000 { >> + compatible = "fsl,qoriq-gpio"; >> + reg = <0x0 0x2310000 0x0 0x10000>; >> + interrupts = <0 67 0x4>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + wdog0: wdog@2ad0000 { >> + compatible = "fsl,ls1012a-wdt", >> + "fsl,ls1043a-wdt", >> + "fsl,imx21-wdt"; > >I understand "fsl,imx21-wdt" is the one that kernel driver matches, but why do we >need "fsl,ls1043a-wdt" here? OK, will remove "fsl,ls1043a-wdt", > >> + reg = <0x0 0x2ad0000 0x0 0x10000>; >> + interrupts = <0 83 0x4>; >> + clocks = <&clockgen 4 0>; >> + clock-names = "wdog"; > >clock-names is not required for fsl,imx21-wdt. Ok , will remove clock-names = "wdog"; > >> + big-endian; >> + }; >> + >> + sai1: sai@2b50000 { >> + #sound-dai-cells = <0>; >> + compatible = "fsl,vf610-sai"; >> + reg = <0x0 0x2b50000 0x0 0x10000>; >> + interrupts = <0 148 0x4>; >> + clocks = <&clockgen 4 3>, <&clockgen 4 3>, >> + <&clockgen 4 3>, <&clockgen 4 3>; >> + clock-names = "bus", "mclk1", "mclk2", "mclk3"; >> + dma-names = "tx", "rx"; >> + dmas = <&edma0 1 47>, >> + <&edma0 1 46>; >> + status = "disabled"; >> + }; >> + >> + sai2: sai@2b60000 { >> + #sound-dai-cells = <0>; >> + compatible = "fsl,vf610-sai"; >> + reg = <0x0 0x2b60000 0x0 0x10000>; >> + interrupts = <0 149 0x4>; >> + clocks = <&clockgen 4 3>, <&clockgen 4 3>, >> + <&clockgen 4 3>, <&clockgen 4 3>; >> + clock-names = "bus", "mclk1", "mclk2", "mclk3"; >> + dma-names = "tx", "rx"; >> + dmas = <&edma0 1 45>, >> + <&edma0 1 44>; >> + status = "disabled"; >> + }; >> + >> + edma0: edma@2c00000 { >> + #dma-cells = <2>; >> + compatible = "fsl,vf610-edma"; >> + reg = <0x0 0x2c00000 0x0 0x10000>, >> + <0x0 0x2c10000 0x0 0x10000>, >> + <0x0 0x2c20000 0x0 0x10000>; >> + interrupts = <0 103 0x4>, >> + <0 103 0x4>; >> + interrupt-names = "edma-tx", "edma-err"; >> + dma-channels = <32>; >> + big-endian; >> + clock-names = "dmamux0", "dmamux1"; >> + clocks = <&clockgen 4 3>, >> + <&clockgen 4 3>; >> + }; >> + >> + sata: sata@3200000 { >> + compatible = "fsl,ls1012a-ahci"; >> + reg = <0x0 0x3200000 0x0 0x10000>; >> + interrupts = <0 69 0x4>; >> + clocks = <&clockgen 4 0>; >> + }; >> + >> + msi2: msi-controller2@1572000 { >> + compatible ="fsl,1s1012a-msi", "fsl,1s1021a-msi"; >> + reg = <0x0 0x1572000 0x0 0x4>, >> + <0x0 0x1572004 0x0 0x4>; >> + reg-names = "msiir", "msir"; >> + msi-controller; >> + interrupts = <0 126 0x4>; >> + }; >> + >> + usb@8600000 { >> + compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; >> + reg = <0x0 0x8600000 0x0 0x1000>; >> + interrupts = <0 139 0x4>; >> + dr_mode = "host"; >> + phy_type = "ulpi"; >> + fsl,usb-erratum-a005697; > >It seems to me that fsl,usb-erratum-a005697 is neither documented or supported >by kernel driver at all. Yes the driver part using the erratum is not yet up-streamed, so will remove fsl,usb-erratum-a005697; > >> + }; >> + >> + usb0: usb3@2f00000 { >> + compatible = "snps,dwc3"; >> + reg = <0x0 0x2f00000 0x0 0x10000>; >> + interrupts = <0 60 0x4>; >> + dr_mode = "host"; >> + configure-gfladj; OK will remove this . > >Ditto > >Shawn > >> + snps,dis_rxdet_inp3_quirk; >> + }; >> + >> + pcie@3400000 { >> + compatible = "fsl,ls1012a-pcie", >> + "fsl,ls1043a-pcie", >> + "snps,dw-pcie"; >> + reg = <0x00 0x03400000 0x0 0x00100000 /* controller >registers */ >> + 0x40 0x00000000 0x0 0x00002000>; /* configuration >space */ >> + reg-names = "regs", "config"; >> + interrupts = <0 118 0x4>, /* controller interrupt */ >> + <0 117 0x4>; /* PME interrupt */ >> + interrupt-names = "intr", "pme"; >> + #address-cells = <3>; >> + #size-cells = <2>; >> + device_type = "pci"; >> + num-lanes = <4>; >> + bus-range = <0x0 0xff>; >> + ranges = <0x81000000 0x0 0x00000000 0x40 >0x00010000 0x0 0x00010000 /* downstream I/O */ >> + 0x82000000 0x0 0x40000000 0x40 0x40000000 >0x0 0x40000000>; /* non-prefetchable memory */ >> + msi-parent = <&msi2>; >> + #interrupt-cells = <1>; >> + interrupt-map-mask = <0 0 0 7>; >> + interrupt-map = <0000 0 0 1 &gic 0 110 0x4>, >> + <0000 0 0 2 &gic 0 111 0x4>, >> + <0000 0 0 3 &gic 0 112 0x4>, >> + <0000 0 0 4 &gic 0 113 0x4>; >> + }; >> + }; >> +}; >> -- >> 1.9.1 >> >> >> _______________________________________________ >> linux-arm-kernel mailing list >> linux-arm-kernel@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel From mboxrd@z Thu Jan 1 00:00:00 1970 From: bhaskar.upadhaya@nxp.com (Bhaskar U) Date: Fri, 30 Sep 2016 11:38:13 +0000 Subject: [PATCH v2 1/1] arm64: Add DTS support for FSL's LS1012A SoC In-Reply-To: <20160829095239.GM30790@tiger> References: <1472207241-18461-1-git-send-email-Bhaskar.Upadhaya@nxp.com> <20160829095239.GM30790@tiger> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org >-----Original Message----- >From: Shawn Guo [mailto:shawnguo at kernel.org] >Sent: Monday, August 29, 2016 3:23 PM >To: Bhaskar U >Cc: devicetree at vger.kernel.org; Stuart Yoder ; >oss at buserror.net; Prabhakar Kushwaha ; linux- >devel at gforge.freescale.net; Pratiyush Srivastava >; linux-arm-kernel at lists.infradead.org >Subject: Re: [PATCH v2 1/1] arm64: Add DTS support for FSL's LS1012A SoC > >On Fri, Aug 26, 2016 at 03:57:21PM +0530, Bhaskar Upadhaya wrote: >> Add the device tree support for FSL LS1012A SoC. >> Following levels of DTSI/DTS files have been created for the LS1012A >> SoC family: >> >> - fsl-ls1012a.dtsi: >> DTS-Include file for FSL LS1012A SoC. >> >> - fsl-ls1012a-frdm.dts: >> DTS file for FSL LS1012A FRDM board. >> >> - fsl-ls1012a-qds.dts: >> DTS file for FSL LS1012A QDS board. >> >> - fsl-ls1012a-rdb.dts: >> DTS file for FSL LS1012A RDB board. >> >> Changes vs version1: >> - Consistent Licensing for dts files >> - Removed the PFE node >> - Update reset node with reboot node >> - Update clocks property in codec node >> - Update regulators node >> - Update timer node >> - Update compatible property of clockgen with "fsl,ls1012a-clockgen" >only >> - Update compatible property of scfg with "fsl,ls1012a-scfg" only >> - Update compatible property with proper ordering in tmu node >> >> Signed-off-by: Prabhakar Kushwaha >> Signed-off-by: Pratiyush Mohan Srivastava >> >> Signed-off-by: Bhaskar Upadhaya >> --- >> arch/arm64/boot/dts/freescale/Makefile | 3 + >> arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 150 +++++++ >> arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 180 ++++++++ >> arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 79 ++++ >> arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 480 >+++++++++++++++++++++ >> 5 files changed, 892 insertions(+) >> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts >> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts >> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts >> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi >> >> diff --git a/arch/arm64/boot/dts/freescale/Makefile >> b/arch/arm64/boot/dts/freescale/Makefile >> index 1b7783d..3503c46 100644 >> --- a/arch/arm64/boot/dts/freescale/Makefile >> +++ b/arch/arm64/boot/dts/freescale/Makefile >> @@ -1,3 +1,6 @@ >> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb >> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb >> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb > >Please try to keep the list sort alphabetically. Ok will make the sequence like below dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb > >> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb >> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb >> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb diff --git >> a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts >> b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts >> new file mode 100644 >> index 0000000..dc6df47 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts >> @@ -0,0 +1,150 @@ >> +/* >> + * Device Tree file for Freescale Layerscape-1012A family SoC. >> + * >> + * Copyright 2016, Freescale Semiconductor >> + * >> + * This file is dual-licensed: you can use it either under the terms >> + * of the GPLv2 or the X11 license, at your option. Note that this >> +dual >> + * licensing only applies to this file, and not this project as a >> + * whole. >> + * >> + * a) This library is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of the >> + * License, or (at your option) any later version. >> + * >> + * This library is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * Or, alternatively, >> + * >> + * b) Permission is hereby granted, free of charge, to any person >> + * obtaining a copy of this software and associated documentation >> + * files (the "Software"), to deal in the Software without >> + * restriction, including without limitation the rights to use, >> + * copy, modify, merge, publish, distribute, sublicense, and/or >> + * sell copies of the Software, and to permit persons to whom the >> + * Software is furnished to do so, subject to the following >> + * conditions: >> + * >> + * The above copyright notice and this permission notice shall be >> + * included in all copies or substantial portions of the Software. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY >KIND, >> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE >WARRANTIES >> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND >> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT >> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, >> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE >OR >> + * OTHER DEALINGS IN THE SOFTWARE. >> + */ >> +/dts-v1/; >> + >> +#include "fsl-ls1012a.dtsi" >> + >> +/ { >> + model = "LS1012A Freedom Board"; >> + compatible = "fsl,ls1012a-frdm", "fsl,ls1012a"; >> + >> + aliases { >> + crypto = &crypto; >> + }; >> + >> + sys_mclk: clock-mclk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <25000000>; >> + }; >> + >> + sound { >> + compatible = "simple-audio-card"; >> + simple-audio-card,format = "i2s"; >> + simple-audio-card,widgets = >> + "Microphone", "Microphone Jack", >> + "Headphone", "Headphone Jack", >> + "Speaker", "Speaker Ext", >> + "Line", "Line In Jack"; >> + simple-audio-card,routing = >> + "MIC_IN", "Microphone Jack", >> + "Microphone Jack", "Mic Bias", >> + "LINE_IN", "Line In Jack", >> + "Headphone Jack", "HP_OUT", >> + "Speaker Ext", "LINE_OUT"; >> + >> + simple-audio-card,cpu { >> + sound-dai = <&sai2>; >> + frame-master; >> + bitclock-master; >> + }; >> + >> + simple-audio-card,codec { >> + sound-dai = <&codec>; >> + frame-master; >> + bitclock-master; >> + system-clock-frequency = <25000000>; >> + }; >> + }; >> +}; >> + >> +&qspi { >> + num-cs = <2>; >> + bus-num = <0>; >> + status = "disabled"; > >Why is it being disabled? Ok, will change like below. status = "okay"; > >> + fsl,ddr-sampling-point = <4>; > >I do not find the bindings for this property, neither how driver supports it. Yes the QSPI DDR mode is not yet up-streamed, so I will remove this property as of now. > >> + >> + qflash0: s25fs512s at 0 { >> + compatible = "spansion,m25p80"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + spi-max-frequency = <20000000>; >> + m25p,fast-read; >> + reg = <0>; >> + }; >> +}; >> + >> +&i2c0 { >> + status = "okay"; >> + >> + codec: sgtl5000 at a { >> + #sound-dai-cells = <0>; >> + compatible = "fsl,sgtl5000"; >> + reg = <0xa>; >> + VDDA-supply = <®_1p8v>; >> + VDDIO-supply = <®_1p8v>; >> + clocks = <&sys_mclk>; >> + }; >> +}; >> + >> +&duart0 { >> + status = "okay"; >> +}; >> + >> +&esdhc0 { >> + status = "disabled"; > >We prefer to disable devices which have board level options by default in >.dtsi, and enable them per availability in .dts. Ok , will make the status as okay i.e. status = "okay"; > >> +}; >> + >> +&esdhc1 { >> + status = "disabled"; >> +}; >> + >> +&sai2 { >> + status = "disabled"; >> +}; >> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts >> b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts >> new file mode 100644 >> index 0000000..382d070 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts >> @@ -0,0 +1,180 @@ >> +/* >> + * Device Tree file for Freescale Layerscape-1012A family SoC. >> + * >> + * Copyright 2016, Freescale Semiconductor >> + * >> + * This file is dual-licensed: you can use it either under the terms >> + * of the GPLv2 or the X11 license, at your option. Note that this >> +dual >> + * licensing only applies to this file, and not this project as a >> + * whole. >> + * >> + * a) This library is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of the >> + * License, or (at your option) any later version. >> + * >> + * This library is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * Or, alternatively, >> + * >> + * b) Permission is hereby granted, free of charge, to any person >> + * obtaining a copy of this software and associated documentation >> + * files (the "Software"), to deal in the Software without >> + * restriction, including without limitation the rights to use, >> + * copy, modify, merge, publish, distribute, sublicense, and/or >> + * sell copies of the Software, and to permit persons to whom the >> + * Software is furnished to do so, subject to the following >> + * conditions: >> + * >> + * The above copyright notice and this permission notice shall be >> + * included in all copies or substantial portions of the Software. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY >KIND, >> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE >WARRANTIES >> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND >> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT >> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, >> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE >OR >> + * OTHER DEALINGS IN THE SOFTWARE. >> + */ >> +/dts-v1/; >> + >> +#include "fsl-ls1012a.dtsi" >> + >> +/ { >> + model = "LS1012A QDS Board"; >> + compatible = "fsl,ls1012a-qds", "fsl,ls1012a"; >> + >> + aliases { >> + crypto = &crypto; >> + }; >> + >> + sys_mclk: clock-mclk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <24576000>; >> + }; >> + >> + regulators { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg_3p3v: regulator at 0 { >> + compatible = "regulator-fixed"; >> + reg = <0x0>; >> + regulator-name = "3P3V"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-always-on; >> + }; >> + }; >> + >> + sound { >> + compatible = "simple-audio-card"; >> + simple-audio-card,format = "i2s"; >> + simple-audio-card,widgets = >> + "Microphone", "Microphone Jack", >> + "Headphone", "Headphone Jack", >> + "Speaker", "Speaker Ext", >> + "Line", "Line In Jack"; >> + simple-audio-card,routing = >> + "MIC_IN", "Microphone Jack", >> + "Microphone Jack", "Mic Bias", >> + "LINE_IN", "Line In Jack", >> + "Headphone Jack", "HP_OUT", >> + "Speaker Ext", "LINE_OUT"; >> + >> + simple-audio-card,cpu { >> + sound-dai = <&sai2>; >> + frame-master; >> + bitclock-master; >> + }; >> + >> + simple-audio-card,codec { >> + sound-dai = <&codec>; >> + frame-master; >> + bitclock-master; >> + system-clock-frequency = <24576000>; >> + }; >> + }; >> +}; >> + >> +&dspi0 { >> + bus-num = <0>; >> + status = "okay"; >> + >> + flash at 0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "n25q128a11", "jedec,spi-nor"; /* 16MB */ >> + reg = <0>; >> + spi-max-frequency = <10000000>; /* input clock */ >> + }; >> + >> + flash at 1 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "sst,sst25wf040b", "jedec,spi-nor"; /* 512KB */ >> + reg = <1>; >> + spi-max-frequency = <35000000>; /* input clock */ >> + }; >> + >> + flash at 2 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "eon,en25s64", "jedec,spi-nor"; /* 8MB */ >> + reg = <2>; >> + spi-max-frequency = <35000000>; /* input clock */ >> + }; >> +}; >> + >> +&qspi { >> + num-cs = <2>; >> + bus-num = <0>; >> + status = "disabled"; >> + >> + qflash0: s25fs512s at 0 { >> + compatible = "spansion,m25p80"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + spi-max-frequency = <20000000>; >> + m25p,fast-read; >> + reg = <0>; >> + }; >> +}; >> + >> +&i2c0 { >> + status = "okay"; > >Please have a newline between property list and sub-node. OK > >> + pca9547 at 77 { >> + compatible = "nxp,pca9547"; >> + reg = <0x77>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + i2c at 4 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x4>; >> + >> + codec: sgtl5000 at a { >> + #sound-dai-cells = <0>; >> + compatible = "fsl,sgtl5000"; >> + reg = <0xa>; >> + VDDA-supply = <®_3p3v>; >> + VDDIO-supply = <®_3p3v>; >> + clocks = <&sys_mclk>; >> + }; >> + }; >> + }; >> +}; >> + >> +&duart0 { >> + status = "okay"; >> +}; >> + >> +&sai2 { >> + status = "disabled"; >> +}; >> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts >> b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts >> new file mode 100644 >> index 0000000..b609032 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts >> @@ -0,0 +1,79 @@ >> +/* >> + * Device Tree file for Freescale Layerscape-1012A family SoC. >> + * >> + * Copyright 2016, Freescale Semiconductor >> + * >> + * This file is dual-licensed: you can use it either under the terms >> + * of the GPLv2 or the X11 license, at your option. Note that this >> +dual >> + * licensing only applies to this file, and not this project as a >> + * whole. >> + * >> + * a) This library is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of the >> + * License, or (at your option) any later version. >> + * >> + * This library is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * Or, alternatively, >> + * >> + * b) Permission is hereby granted, free of charge, to any person >> + * obtaining a copy of this software and associated documentation >> + * files (the "Software"), to deal in the Software without >> + * restriction, including without limitation the rights to use, >> + * copy, modify, merge, publish, distribute, sublicense, and/or >> + * sell copies of the Software, and to permit persons to whom the >> + * Software is furnished to do so, subject to the following >> + * conditions: >> + * >> + * The above copyright notice and this permission notice shall be >> + * included in all copies or substantial portions of the Software. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY >KIND, >> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE >WARRANTIES >> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND >> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT >> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, >> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE >OR >> + * OTHER DEALINGS IN THE SOFTWARE. >> + */ >> +/dts-v1/; >> + >> +#include "fsl-ls1012a.dtsi" >> + >> +/ { >> + model = "LS1012A RDB Board"; >> + compatible = "fsl,ls1012a-rdb", "fsl,ls1012a"; >> + >> + aliases { >> + crypto = &crypto; >> + }; >> +}; >> + >> +&qspi { >> + num-cs = <2>; >> + bus-num = <0>; >> + status = "disabled"; >> + fsl,ddr-sampling-point = <4>; >> + >> + qflash0: s25fs512s at 0 { >> + compatible = "spansion,m25p80"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + spi-max-frequency = <20000000>; >> + m25p,fast-read; >> + reg = <0>; >> + }; >> +}; >> + >> +&i2c0 { >> + status = "okay"; >> +}; >> + >> +&duart0 { >> + status = "okay"; >> +}; >> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi >> b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi >> new file mode 100644 >> index 0000000..80fe028 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi >> @@ -0,0 +1,480 @@ >> +/* >> + * Device Tree Include file for Freescale Layerscape-1012A family SoC. >> + * >> + * Copyright 2016, Freescale Semiconductor >> + * >> + * This file is dual-licensed: you can use it either under the terms >> + * of the GPLv2 or the X11 license, at your option. Note that this >> +dual >> + * licensing only applies to this file, and not this project as a >> + * whole. >> + * >> + * a) This library is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of the >> + * License, or (at your option) any later version. >> + * >> + * This library is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * Or, alternatively, >> + * >> + * b) Permission is hereby granted, free of charge, to any person >> + * obtaining a copy of this software and associated documentation >> + * files (the "Software"), to deal in the Software without >> + * restriction, including without limitation the rights to use, >> + * copy, modify, merge, publish, distribute, sublicense, and/or >> + * sell copies of the Software, and to permit persons to whom the >> + * Software is furnished to do so, subject to the following >> + * conditions: >> + * >> + * The above copyright notice and this permission notice shall be >> + * included in all copies or substantial portions of the Software. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY >KIND, >> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE >WARRANTIES >> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND >> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT >> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, >> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE >OR >> + * OTHER DEALINGS IN THE SOFTWARE. >> + */ >> + >> +#include >> + >> +/ { >> + compatible = "fsl,ls1012a"; >> + interrupt-parent = <&gic>; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + >> + cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + cpu0: cpu at 0 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53"; >> + reg = <0x0 0x0>; > >This doesn't match the #address-cells property of 'cpus' node. Ok will make as reg = <0x0>; > >> + clocks = <&clockgen 1 0>; >> + #cooling-cells = <2>; >> + }; >> + }; >> + >> + sysclk: sysclk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <100000000>; >> + clock-output-names = "sysclk"; >> + }; >> + >> + timer { >> + compatible = "arm,armv8-timer"; >> + interrupts = <1 13 0x1>, /* Physical Secure PPI */ >> + <1 14 0x1>, /* Physical Non-Secure PPI */ >> + <1 11 0x1>, /* Virtual PPI */ >> + <1 10 0x1>; /* Hypervisor PPI */ > >Can we use the constant defined in >dt-bindings/interrupt-controller/irq.h to make them a bit more readable? OK, will include the #include in fsl-ls1012a.dtsi and edit the interrupts like below interrupts = <1 13 IRQ_TYPE_EDGE_RISING>, /* Physical Secure PPI */ <1 14 IRQ_TYPE_EDGE_RISING>, /* Physical Non-Secure PPI */ <1 11 IRQ_TYPE_EDGE_RISING>, /* Virtual PPI */ <1 10 IRQ_TYPE_EDGE_RISING>; /* Hypervisor PPI */ > >> + }; >> + >> + pmu { >> + compatible = "arm,armv8-pmuv3"; >> + interrupts = <0 106 0x4>; >> + }; >> + >> + gic: interrupt-controller at 1400000 { >> + compatible = "arm,gic-400"; >> + #interrupt-cells = <3>; >> + interrupt-controller; >> + reg = <0x0 0x1401000 0 0x1000>, /* GICD */ >> + <0x0 0x1402000 0 0x2000>, /* GICC */ >> + <0x0 0x1404000 0 0x2000>, /* GICH */ >> + <0x0 0x1406000 0 0x2000>; /* GICV */ >> + interrupts = <1 9 0xf08>; >> + }; >> + >> + soc { >> + compatible = "simple-bus"; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + >> + clockgen: clocking at 1ee1000 { >> + compatible = "fsl,ls1012a-clockgen"; > >The compatible cannot be found in binding docs. Still not clear whether we need to add "compatible = "fsl,ls1012a-clockgen";" in Documentation/devicetree/bindings/clock/qoriq-clock.txt as there are contradictory thoughts that whether we need to add each compatible string in the bindings or not ? > >> + reg = <0x0 0x1ee1000 0x0 0x1000>; >> + #clock-cells = <2>; >> + clocks = <&sysclk>; >> + }; >> + >> + scfg: scfg at 1570000 { >> + compatible = "fsl,ls1012a-scfg", "syscon"; > >Ditto Same clarification needed that whether we need to add each compatible string in the bindings or not ? If we need to add I will add [compatible = "fsl,ls1012a-scfg", "syscon";] in Documentation/devicetree/bindings/arm/fsl.txt > >> + reg = <0x0 0x1570000 0x0 0x10000>; >> + big-endian; >> + }; >> + >> + dcfg: dcfg at 1ee0000 { >> + compatible = "fsl,ls1012a-dcfg", >> + "fsl,ls1043a-dcfg", > >If these compatibles are not documented or used, we can drop them? I guess we >only need "syscon" to get it work? Will remove "fsl,ls1043a-dcfg" from here. > >> + "syscon"; >> + reg = <0x0 0x1ee0000 0x0 0x10000>; >> + big-endian; >> + }; >> + >> + crypto: crypto at 1700000 { >> + compatible = "fsl,sec-v5.4", "fsl,sec-v5.0", >> + "fsl,sec-v4.0"; >> + fsl,sec-era = <8>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges = <0x0 0x00 0x1700000 0x100000>; >> + reg = <0x00 0x1700000 0x0 0x100000>; >> + interrupts = <0 75 0x4>; >> + >> + sec_jr0: jr at 10000 { >> + compatible = "fsl,sec-v5.4-job-ring", >> + "fsl,sec-v5.0-job-ring", >> + "fsl,sec-v4.0-job-ring"; >> + reg = <0x10000 0x10000>; >> + interrupts = <0 71 0x4>; >> + }; >> + >> + sec_jr1: jr at 20000 { >> + compatible = "fsl,sec-v5.4-job-ring", >> + "fsl,sec-v5.0-job-ring", >> + "fsl,sec-v4.0-job-ring"; >> + reg = <0x20000 0x10000>; >> + interrupts = <0 72 0x4>; >> + }; >> + >> + sec_jr2: jr at 30000 { >> + compatible = "fsl,sec-v5.4-job-ring", >> + "fsl,sec-v5.0-job-ring", >> + "fsl,sec-v4.0-job-ring"; >> + reg = <0x30000 0x10000>; >> + interrupts = <0 73 0x4>; >> + }; >> + >> + sec_jr3: jr at 40000 { >> + compatible = "fsl,sec-v5.4-job-ring", >> + "fsl,sec-v5.0-job-ring", >> + "fsl,sec-v4.0-job-ring"; >> + reg = <0x40000 0x10000>; >> + interrupts = <0 74 0x4>; >> + }; >> + }; >> + >> + reboot { >> + compatible ="syscon-reboot"; >> + regmap = <&dcfg>; >> + offset = <0xb0>; >> + mask = <0x02>; >> + }; > >It might make more sense to put it directly under root like what fsl-ls1043a.dtsi >does. Ok, will follow the way fsl-ls1043a.dtsi does. > >> + >> + rcpm: rcpm at 1ee2000 { >> + compatible = "fsl,ls1012a-rcpm"; > >Undocumented/unsupported bindings? That again need confirmation that whether we need to add each compatible string in bindings ?. If we need to add, I will add in Documentation/devicetree/bindings/soc/fsl/rcpm.txt > >> + reg = <0x0 0x1ee2000 0x0 0x10000>; >> + }; >> + >> + esdhc0: esdhc at 1560000 { >> + compatible = "fsl,ls1012a-esdhc0", "fsl,esdhc"; >> + reg = <0x0 0x1560000 0x0 0x10000>; >> + interrupts = <0 62 0x4>; >> + clock-frequency = <0>; > >What does a zero of clock-frequency mean? The u-boot will fix up the clock-frequency property with the correct value. So we can drop this property. > >> + voltage-ranges = <1800 1800 3300 3300>; >> + sdhci,auto-cmd12; >> + big-endian; >> + bus-width = <4>; >> + }; >> + >> + esdhc1: esdhc at 1580000 { >> + compatible = "fsl,ls1012a-esdhc1", "fsl,esdhc"; >> + reg = <0x0 0x1580000 0x0 0x10000>; >> + interrupts = <0 65 0x4>; >> + clock-frequency = <0>; >> + voltage-ranges = <1800 1800 3300 3300>; >> + sdhci,auto-cmd12; >> + big-endian; >> + bus-width = <4>; >> + }; >> + >> + dspi0: dspi at 2100000 { >> + compatible = "fsl,ls1012a-dspi", >> + "fsl,ls1043a-dspi", >> + "fsl,ls1021a-v1.0-dspi"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x0 0x2100000 0x0 0x10000>; >> + interrupts = <0 64 0x4>; >> + clock-names = "dspi"; >> + clocks = <&clockgen 4 0>; >> + spi-num-chipselects = <5>; >> + big-endian; >> + status = "enabled"; >> + }; >> + >> + qspi: quadspi at 1550000 { >> + compatible = "fsl,ls1012a-qspi", >> + "fsl,ls1043a-qspi", >> + "fsl,ls1021a-qspi"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x0 0x1550000 0x0 0x10000>, >> + <0x0 0x40000000 0x0 0x4000000>; >> + reg-names = "QuadSPI", "QuadSPI-memory"; >> + interrupts = <0 99 0x4>; >> + clock-names = "qspi_en", "qspi"; >> + clocks = <&clockgen 4 0>, <&clockgen 4 0>; >> + big-endian; >> + amba-base = <0x42000000>; > >I can not find this property in any bindings doc. Amba-base is no longer used for QSPI driver in kernel, So I will remove this property. > >> + }; >> + >> + tmu: tmu at 1f00000 { >> + compatible = "fsl,ls1012a-tmu", "fsl,qoriq-tmu"; >> + reg = <0x0 0x1f00000 0x0 0x10000>; >> + interrupts = <0 33 0x4>; >> + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; >> + fsl,tmu-calibration = <0x00000000 0x00000026 >> + 0x00000001 0x0000002d >> + 0x00000002 0x00000032 >> + 0x00000003 0x00000039 >> + 0x00000004 0x0000003f >> + 0x00000005 0x00000046 >> + 0x00000006 0x0000004d >> + 0x00000007 0x00000054 >> + 0x00000008 0x0000005a >> + 0x00000009 0x00000061 >> + 0x0000000a 0x0000006a >> + 0x0000000b 0x00000071 >> + > >Drop the newline. Ok > >> + 0x00010000 0x00000025 >> + 0x00010001 0x0000002c >> + 0x00010002 0x00000035 >> + 0x00010003 0x0000003d >> + 0x00010004 0x00000045 >> + 0x00010005 0x0000004e >> + 0x00010006 0x00000057 >> + 0x00010007 0x00000061 >> + 0x00010008 0x0000006b >> + 0x00010009 0x00000076 >> + > >Ditto OK > >> + 0x00020000 0x00000029 >> + 0x00020001 0x00000033 >> + 0x00020002 0x0000003d >> + 0x00020003 0x00000049 >> + 0x00020004 0x00000056 >> + 0x00020005 0x00000061 >> + 0x00020006 0x0000006d >> + > >Ditto OK > >> + 0x00030000 0x00000021 >> + 0x00030001 0x0000002a >> + 0x00030002 0x0000003c >> + 0x00030003 0x0000004e>; >> + big-endian; >> + #thermal-sensor-cells = <1>; >> + }; >> + >> + thermal-zones { >> + cpu_thermal: cpu-thermal { >> + polling-delay-passive = <1000>; >> + polling-delay = <5000>; >> + > >Ditto OK > >> + thermal-sensors = <&tmu 0>; >> + >> + trips { >> + cpu_alert: cpu-alert { >> + temperature = <85000>; >> + hysteresis = <2000>; >> + type = "passive"; >> + }; > >Have a newline between nodes. OK > >> + cpu_crit: cpu-crit { >> + temperature = <95000>; >> + hysteresis = <2000>; >> + type = "critical"; >> + }; >> + }; >> + >> + cooling-maps { >> + map0 { >> + trip = <&cpu_alert>; >> + cooling-device = >> + <&cpu0 >THERMAL_NO_LIMIT >> + THERMAL_NO_LIMIT>; >> + }; >> + }; >> + }; >> + }; >> + >> + i2c0: i2c at 2180000 { >> + compatible = "fsl,vf610-i2c"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x0 0x2180000 0x0 0x10000>; >> + interrupts = <0 56 0x4>; >> + clock-names = "i2c"; > >This property is not needed. Ok, will remove this > >> + clocks = <&clockgen 4 0>; >> + status = "disabled"; >> + }; >> + >> + i2c1: i2c at 2190000 { >> + compatible = "fsl,vf610-i2c"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x0 0x2190000 0x0 0x10000>; >> + interrupts = <0 57 0x4>; >> + clock-names = "i2c"; > >Ditto Ok, will remove this > >> + clocks = <&clockgen 4 0>; >> + status = "disabled"; >> + }; >> + >> + >> + duart0: serial at 21c0500 { >> + compatible = "fsl,ns16550", "ns16550a"; >> + reg = <0x00 0x21c0500 0x0 0x100>; >> + interrupts = <0 54 0x4>; >> + clocks = <&clockgen 4 0>; >> + }; >> + >> + duart1: serial at 21c0600 { >> + compatible = "fsl,ns16550", "ns16550a"; >> + reg = <0x00 0x21c0600 0x0 0x100>; >> + interrupts = <0 54 0x4>; >> + clocks = <&clockgen 4 0>; >> + }; >> + >> + gpio0: gpio at 2300000 { >> + compatible = "fsl,qoriq-gpio"; >> + reg = <0x0 0x2300000 0x0 0x10000>; >> + interrupts = <0 66 0x4>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpio1: gpio at 2310000 { >> + compatible = "fsl,qoriq-gpio"; >> + reg = <0x0 0x2310000 0x0 0x10000>; >> + interrupts = <0 67 0x4>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + wdog0: wdog at 2ad0000 { >> + compatible = "fsl,ls1012a-wdt", >> + "fsl,ls1043a-wdt", >> + "fsl,imx21-wdt"; > >I understand "fsl,imx21-wdt" is the one that kernel driver matches, but why do we >need "fsl,ls1043a-wdt" here? OK, will remove "fsl,ls1043a-wdt", > >> + reg = <0x0 0x2ad0000 0x0 0x10000>; >> + interrupts = <0 83 0x4>; >> + clocks = <&clockgen 4 0>; >> + clock-names = "wdog"; > >clock-names is not required for fsl,imx21-wdt. Ok , will remove clock-names = "wdog"; > >> + big-endian; >> + }; >> + >> + sai1: sai at 2b50000 { >> + #sound-dai-cells = <0>; >> + compatible = "fsl,vf610-sai"; >> + reg = <0x0 0x2b50000 0x0 0x10000>; >> + interrupts = <0 148 0x4>; >> + clocks = <&clockgen 4 3>, <&clockgen 4 3>, >> + <&clockgen 4 3>, <&clockgen 4 3>; >> + clock-names = "bus", "mclk1", "mclk2", "mclk3"; >> + dma-names = "tx", "rx"; >> + dmas = <&edma0 1 47>, >> + <&edma0 1 46>; >> + status = "disabled"; >> + }; >> + >> + sai2: sai at 2b60000 { >> + #sound-dai-cells = <0>; >> + compatible = "fsl,vf610-sai"; >> + reg = <0x0 0x2b60000 0x0 0x10000>; >> + interrupts = <0 149 0x4>; >> + clocks = <&clockgen 4 3>, <&clockgen 4 3>, >> + <&clockgen 4 3>, <&clockgen 4 3>; >> + clock-names = "bus", "mclk1", "mclk2", "mclk3"; >> + dma-names = "tx", "rx"; >> + dmas = <&edma0 1 45>, >> + <&edma0 1 44>; >> + status = "disabled"; >> + }; >> + >> + edma0: edma at 2c00000 { >> + #dma-cells = <2>; >> + compatible = "fsl,vf610-edma"; >> + reg = <0x0 0x2c00000 0x0 0x10000>, >> + <0x0 0x2c10000 0x0 0x10000>, >> + <0x0 0x2c20000 0x0 0x10000>; >> + interrupts = <0 103 0x4>, >> + <0 103 0x4>; >> + interrupt-names = "edma-tx", "edma-err"; >> + dma-channels = <32>; >> + big-endian; >> + clock-names = "dmamux0", "dmamux1"; >> + clocks = <&clockgen 4 3>, >> + <&clockgen 4 3>; >> + }; >> + >> + sata: sata at 3200000 { >> + compatible = "fsl,ls1012a-ahci"; >> + reg = <0x0 0x3200000 0x0 0x10000>; >> + interrupts = <0 69 0x4>; >> + clocks = <&clockgen 4 0>; >> + }; >> + >> + msi2: msi-controller2 at 1572000 { >> + compatible ="fsl,1s1012a-msi", "fsl,1s1021a-msi"; >> + reg = <0x0 0x1572000 0x0 0x4>, >> + <0x0 0x1572004 0x0 0x4>; >> + reg-names = "msiir", "msir"; >> + msi-controller; >> + interrupts = <0 126 0x4>; >> + }; >> + >> + usb at 8600000 { >> + compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; >> + reg = <0x0 0x8600000 0x0 0x1000>; >> + interrupts = <0 139 0x4>; >> + dr_mode = "host"; >> + phy_type = "ulpi"; >> + fsl,usb-erratum-a005697; > >It seems to me that fsl,usb-erratum-a005697 is neither documented or supported >by kernel driver at all. Yes the driver part using the erratum is not yet up-streamed, so will remove fsl,usb-erratum-a005697; > >> + }; >> + >> + usb0: usb3 at 2f00000 { >> + compatible = "snps,dwc3"; >> + reg = <0x0 0x2f00000 0x0 0x10000>; >> + interrupts = <0 60 0x4>; >> + dr_mode = "host"; >> + configure-gfladj; OK will remove this . > >Ditto > >Shawn > >> + snps,dis_rxdet_inp3_quirk; >> + }; >> + >> + pcie at 3400000 { >> + compatible = "fsl,ls1012a-pcie", >> + "fsl,ls1043a-pcie", >> + "snps,dw-pcie"; >> + reg = <0x00 0x03400000 0x0 0x00100000 /* controller >registers */ >> + 0x40 0x00000000 0x0 0x00002000>; /* configuration >space */ >> + reg-names = "regs", "config"; >> + interrupts = <0 118 0x4>, /* controller interrupt */ >> + <0 117 0x4>; /* PME interrupt */ >> + interrupt-names = "intr", "pme"; >> + #address-cells = <3>; >> + #size-cells = <2>; >> + device_type = "pci"; >> + num-lanes = <4>; >> + bus-range = <0x0 0xff>; >> + ranges = <0x81000000 0x0 0x00000000 0x40 >0x00010000 0x0 0x00010000 /* downstream I/O */ >> + 0x82000000 0x0 0x40000000 0x40 0x40000000 >0x0 0x40000000>; /* non-prefetchable memory */ >> + msi-parent = <&msi2>; >> + #interrupt-cells = <1>; >> + interrupt-map-mask = <0 0 0 7>; >> + interrupt-map = <0000 0 0 1 &gic 0 110 0x4>, >> + <0000 0 0 2 &gic 0 111 0x4>, >> + <0000 0 0 3 &gic 0 112 0x4>, >> + <0000 0 0 4 &gic 0 113 0x4>; >> + }; >> + }; >> +}; >> -- >> 1.9.1 >> >> >> _______________________________________________ >> linux-arm-kernel mailing list >> linux-arm-kernel at lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel