RE: [PATCH V5 00/13] mmc: Add Command Queue support

[Bough Chen <haibo.chen@nxp.com>]

> -----Original Message-----
> From: linux-mmc-owner@vger.kernel.org [mailto:linux-mmc-
> owner@vger.kernel.org] On Behalf Of Adrian Hunter
> Sent: Thursday, August 10, 2017 8:08 PM
> To: Ulf Hansson <ulf.hansson@linaro.org>
> Cc: linux-mmc <linux-mmc@vger.kernel.org>; Bough Chen
> <haibo.chen@nxp.com>; Alex Lemberg <alex.lemberg@sandisk.com>;
> Mateusz Nowak <mateusz.nowak@intel.com>; Yuliy Izrailov
> <Yuliy.Izrailov@sandisk.com>; Jaehoon Chung <jh80.chung@samsung.com>;
> Dong Aisheng <dongas86@gmail.com>; Das Asutosh
> <asutoshd@codeaurora.org>; Zhangfei Gao <zhangfei.gao@gmail.com>;
> Sahitya Tummala <stummala@codeaurora.org>; Harjani Ritesh
> <riteshh@codeaurora.org>; Venu Byravarasu <vbyravarasu@nvidia.com>;
> Linus Walleij <linus.walleij@linaro.org>; Shawn Lin <shawn.lin@rock-chips.com>
> Subject: [PATCH V5 00/13] mmc: Add Command Queue support
> 
> Hi
> 
> Here is V5 of the hardware command queue patches without the software
> command queue patches.
> 
> HW CMDQ offers 25% - 50% better random multi-threaded I/O.  I see a slight 2%
> drop in sequential read speed but no change to sequential write.
> 
> 

Hi Adrian,

My work is based on 4.9 branch, I back port most mmc related patches, but not back port that much block layer related patches, so when I apply your V5 patches, I remove some code, such as "BLK_STS_IOERR" and "REQ_OP_DRV_IN" "REQ_OP_DRV_OUT", change to the old usage. No other change for your V5 patches.

This V5 patches indeed fix the 32bit DMA issue, now my i.MX8 CMDQ can pass all the stress test.
 
So I would like to add:
 
Tested-by: Haibo Chen <haibo.chen@nxp.com>;

Best Regards
Haibo chen

> Changes since V4:
>       mmc: core: Add mmc_retune_hold_now()
> 	Add explanation to commit message.
>       mmc: host: Add CQE interface
> 	Add comments to callback declarations.
>       mmc: core: Turn off CQE before sending commands
> 	Add explanation to commit message.
>       mmc: core: Add support for handling CQE requests
> 	Add comments as requested by Ulf.
>       mmc: core: Remove unused MMC_CAP2_PACKED_CMD
> 	New patch.
>       mmc: mmc: Enable Command Queuing
> 	Adjust for removal of MMC_CAP2_PACKED_CMD.
> 	Add a comment about Packed Commands.
>       mmc: mmc: Enable CQE's
> 	Remove un-necessary check for MMC_CAP2_CQE
>       mmc: block: Use local variables in mmc_blk_data_prep()
> 	New patch.
>       mmc: block: Prepare CQE data
> 	Adjust due to "mmc: block: Use local variables in
> mmc_blk_data_prep()"
> 	Remove priority setting.
> 	Add explanation to commit message.
>       mmc: cqhci: support for command queue enabled host
> 	Fix transfer descriptor setting in cqhci_set_tran_desc() for 32-bit DMA
> 
> Changes since V3:
> 	Adjusted ...blk_end_request...() for new block status codes
> 	Fixed CQHCI transaction descriptor for "no DCMD" case
> 
> Changes since V2:
> 	Dropped patches that have been applied.
> 	Re-based
> 	Added "mmc: sdhci-pci: Add CQHCI support for Intel GLK"
> 
> Changes since V1:
> 
> 	"Share mmc request array between partitions" is dependent
> 	on changes in "Introduce queue semantics", so added that
> 	and block fixes:
> 
> 	Added "Fix is_waiting_last_req set incorrectly"
> 	Added "Fix cmd error reset failure path"
> 	Added "Use local var for mqrq_cur"
> 	Added "Introduce queue semantics"
> 
> Changes since RFC:
> 
> 	Re-based on next.
> 	Added comment about command queue priority.
> 	Added some acks and reviews.
> 
> 
> Adrian Hunter (12):
>       mmc: core: Add mmc_retune_hold_now()
>       mmc: core: Add members to mmc_request and mmc_data for CQE's
>       mmc: host: Add CQE interface
>       mmc: core: Turn off CQE before sending commands
>       mmc: core: Add support for handling CQE requests
>       mmc: core: Remove unused MMC_CAP2_PACKED_CMD
>       mmc: mmc: Enable Command Queuing
>       mmc: mmc: Enable CQE's
>       mmc: block: Use local variables in mmc_blk_data_prep()
>       mmc: block: Prepare CQE data
>       mmc: block: Add CQE support
>       mmc: sdhci-pci: Add CQHCI support for Intel GLK
> 
> Venkat Gopalakrishnan (1):
>       mmc: cqhci: support for command queue enabled host
> 
>  drivers/mmc/core/block.c          |  238 +++++++-
>  drivers/mmc/core/block.h          |    7 +
>  drivers/mmc/core/bus.c            |    7 +
>  drivers/mmc/core/core.c           |  178 +++++-
>  drivers/mmc/core/host.c           |    6 +
>  drivers/mmc/core/host.h           |    1 +
>  drivers/mmc/core/mmc.c            |   42 +-
>  drivers/mmc/core/queue.c          |  273 ++++++++-
>  drivers/mmc/core/queue.h          |   42 +-
>  drivers/mmc/host/Kconfig          |   14 +
>  drivers/mmc/host/Makefile         |    1 +
>  drivers/mmc/host/cqhci.c          | 1154
> +++++++++++++++++++++++++++++++++++++
>  drivers/mmc/host/cqhci.h          |  240 ++++++++
>  drivers/mmc/host/sdhci-pci-core.c |  153 ++++-
>  include/linux/mmc/core.h          |   18 +-
>  include/linux/mmc/host.h          |   63 +-
>  include/trace/events/mmc.h        |   36 +-
>  17 files changed, 2412 insertions(+), 61 deletions(-)  create mode 100644
> drivers/mmc/host/cqhci.c  create mode 100644 drivers/mmc/host/cqhci.h
> 
> 
> Regards
> Adrian
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the
> body of a message to majordomo@vger.kernel.org More majordomo info at
> http://vger.kernel.org/majordomo-info.html