All of lore.kernel.org
 help / color / mirror / Atom feed
From: Zhiqiang Hou <zhiqiang.hou@nxp.com>
To: Zhiqiang Hou <Zhiqiang.Hou@freescale.com>,
	"linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
	"computersforpeace@gmail.com" <computersforpeace@gmail.com>,
	"dwmw2@infradead.org" <dwmw2@infradead.org>,
	"jteki@openedev.com" <jteki@openedev.com>,
	"marex@denx.de" <marex@denx.de>
Cc: "Mingkai.Hu@freescale.com" <Mingkai.Hu@freescale.com>
Subject: RE: [PATCHv3 1/2] mtd: spi-nor: Add SPI NOR layer PM support
Date: Thu, 14 Apr 2016 07:59:39 +0000	[thread overview]
Message-ID: <AM4PR04MB21480F724EE67582F72591C184970@AM4PR04MB2148.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <1453454067-32534-1-git-send-email-Zhiqiang.Hou@freescale.com>

Hi,

Any comments?

> -----Original Message-----
> From: Zhiqiang Hou [mailto:Zhiqiang.Hou@freescale.com]
> Sent: 2016年1月22日 17:14
> To: linux-mtd@lists.infradead.org; computersforpeace@gmail.com;
> dwmw2@infradead.org; jteki@openedev.com; marex@denx.de
> Cc: Mingkai.Hu@freescale.com; Hou Zhiqiang <Zhiqiang.Hou@freescale.com>
> Subject: [PATCHv3 1/2] mtd: spi-nor: Add SPI NOR layer PM support
> 
> From: Hou Zhiqiang <Zhiqiang.Hou@freescale.com>
> 
> Add the Power Management API in SPI NOR framework.
> The Power Management system will turn off power supply to SPI flash when
> system suspending, and then the SPI flash will be in the reset state after system
> resuming. As a result, the status&configurations of SPI flash driver will mismatch
> with its current hardware state.
> So reinitialize SPI flash to make sure it is resumed to the correct state.
> And the SPI NOR layer just do common configuration depending on the records in
> structure spi_nor.
> 
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@freescale.com>
> ---
> Tested on T1042D4RDB.
> 
> V3:
>  - Remove the condition #ifdef CONFIG_PM_SLEEP
>  - Define the spi_nor_unprotect_on_powerup() to make it reuseable.
> 
>  drivers/mtd/spi-nor/spi-nor.c | 73 ++++++++++++++++++++++++++++++++++++----
> ---
>  include/linux/mtd/spi-nor.h   |  9 ++++++
>  2 files changed, 71 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index
> ed0c19c..7e416fb 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -1179,6 +1179,26 @@ static int spi_nor_check(struct spi_nor *nor)
>  	return 0;
>  }
> 
> +/*
> + * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up
> + * with the software protection bits set  */ static int
> +spi_nor_unprotect_on_powerup(struct spi_nor *nor) {
> +	const struct flash_info *info = NULL;
> +	int ret = 0;
> +
> +	info = spi_nor_read_id(nor);
> +	if (JEDEC_MFR(info) == SNOR_MFR_ATMEL ||
> +	    JEDEC_MFR(info) == SNOR_MFR_INTEL ||
> +	    JEDEC_MFR(info) == SNOR_MFR_SST) {
> +		write_enable(nor);
> +		ret = write_sr(nor, 0);
> +	}
> +
> +	return ret;
> +}
> +
>  int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
> {
>  	const struct flash_info *info = NULL;
> @@ -1226,17 +1246,9 @@ int spi_nor_scan(struct spi_nor *nor, const char
> *name, enum read_mode mode)
> 
>  	mutex_init(&nor->lock);
> 
> -	/*
> -	 * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up
> -	 * with the software protection bits set
> -	 */
> -
> -	if (JEDEC_MFR(info) == SNOR_MFR_ATMEL ||
> -	    JEDEC_MFR(info) == SNOR_MFR_INTEL ||
> -	    JEDEC_MFR(info) == SNOR_MFR_SST) {
> -		write_enable(nor);
> -		write_sr(nor, 0);
> -	}
> +	ret = spi_nor_unprotect_on_powerup(nor);
> +	if (ret)
> +		return ret;
> 
>  	if (!mtd->name)
>  		mtd->name = dev_name(dev);
> @@ -1402,6 +1414,45 @@ int spi_nor_scan(struct spi_nor *nor, const char
> *name, enum read_mode mode)  }  EXPORT_SYMBOL_GPL(spi_nor_scan);
> 
> +static int spi_nor_hw_reinit(struct spi_nor *nor) {
> +	const struct flash_info *info = NULL;
> +	struct device *dev = nor->dev;
> +	int ret;
> +
> +	info = spi_nor_read_id(nor);
> +
> +	ret = spi_nor_unprotect_on_powerup(nor);
> +	if (ret)
> +		return ret;
> +
> +	if (nor->flash_read == SPI_NOR_QUAD) {
> +		ret = set_quad_mode(nor, info);
> +		if (ret) {
> +			dev_err(dev, "quad mode not supported\n");
> +			return ret;
> +		}
> +	}
> +
> +	if (nor->addr_width == 4 &&
> +			JEDEC_MFR(info) != SNOR_MFR_SPANSION)
> +		set_4byte(nor, info, 1);
> +
> +	return 0;
> +}
> +
> +int spi_nor_suspend(struct spi_nor *nor) {
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(spi_nor_suspend);
> +
> +int spi_nor_resume(struct spi_nor *nor) {
> +	return spi_nor_hw_reinit(nor);
> +}
> +EXPORT_SYMBOL_GPL(spi_nor_resume);
> +
>  static const struct flash_info *spi_nor_match_id(const char *name)  {
>  	const struct flash_info *id = spi_nor_ids; diff --git a/include/linux/mtd/spi-
> nor.h b/include/linux/mtd/spi-nor.h index 62356d5..32f12cc 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -210,4 +210,13 @@ static inline struct device_node
> *spi_nor_get_flash_node(struct spi_nor *nor)
>   */
>  int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode);
> 
> +/**
> + * spi_nor_suspend/resume() - the SPI NOR layer PM API
> + * @nor:	the spi_nor structure
> + *
> + * Return: 0 for success, others for failure.
> + */
> +int spi_nor_suspend(struct spi_nor *nor); int spi_nor_resume(struct
> +spi_nor *nor);
> +
>  #endif
> --

Thanks,
Zhiqiang

      parent reply	other threads:[~2016-04-14  8:00 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-22  9:14 [PATCHv3 1/2] mtd: spi-nor: Add SPI NOR layer PM support Zhiqiang Hou
2016-01-22  9:14 ` [PATCHv3 2/2] mtd: m25p80: Add Power Management support Zhiqiang Hou
2016-04-14  7:59 ` Zhiqiang Hou [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AM4PR04MB21480F724EE67582F72591C184970@AM4PR04MB2148.eurprd04.prod.outlook.com \
    --to=zhiqiang.hou@nxp.com \
    --cc=Mingkai.Hu@freescale.com \
    --cc=Zhiqiang.Hou@freescale.com \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=jteki@openedev.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marex@denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.