All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrey Vesnovaty <andreyv@mellanox.com>
To: Ori Kam <orika@mellanox.com>,
	"jerinj@marvell.com" <jerinj@marvell.com>,
	Ferruh Yigit <ferruh.yigit@intel.com>
Cc: dpdk-dev <dev@dpdk.org>, "jer@marvell.com" <jer@marvell.com>,
	Thomas Monjalon <thomas@monjalon.net>,
	Ferruh Yigit <ferruh.yigit@intel.com>,
	Stephen Hemminger <stephen@networkplumber.org>,
	"Richardson, Bruce" <bruce.richardson@intel.com>,
	Slava Ovsiienko <viacheslavo@mellanox.com>,
	Andrey Vesnovaty <andrey.vesnovaty@gmail.com>,
	Marko Kovacevic <marko.kovacevic@intel.com>,
	Radu Nicolau <radu.nicolau@intel.com>,
	Akhil Goyal <akhil.goyal@nxp.com>,
	Tomasz Kantecki <tomasz.kantecki@intel.com>,
	Sunil Kumar Kori <skori@marvell.com>,
	Pavan Nikhilesh <pbhagavatula@marvell.com>,
	John McNamara <john.mcnamara@intel.com>
Subject: Re: [dpdk-dev] [PATCH v2 6/6] examples/flow_filtering: utilize shared RSS action
Date: Thu, 9 Jul 2020 12:25:23 +0000	[thread overview]
Message-ID: <AM6PR0502MB3989D3E1CEFD2E2161554749D6640@AM6PR0502MB3989.eurprd05.prod.outlook.com> (raw)
In-Reply-To: <AM6PR05MB5176DEEE335959314B3949F5DB640@AM6PR05MB5176.eurprd05.prod.outlook.com>

Hi, Jerin and Ferruh

First of all it's  decided to postpone this effort to 20.11.
@jerinj@marvell.com I sincerely believe we can work out great API for
- shared action, context
- action update / modification / replacement
after 20.08 without time pressure & stress.

I'm fully committed and will continue to work on this PATCH.
I'll resend improved version of this patch once 20.08 is out & we will
continue our discussion from here to make it even better.

Many thanks to all participants of this discussion,
Andrey


-----Original Message-----
From: Ori Kam <orika@mellanox.com> 
Sent: Thursday, July 9, 2020 9:09 AM
To: Jerin Jacob <jerinjacobk@gmail.com>; Andrey Vesnovaty <andreyv@mellanox.com>
Cc: dpdk-dev <dev@dpdk.org>; jer@marvell.com; Thomas Monjalon <thomas@monjalon.net>; Ferruh Yigit <ferruh.yigit@intel.com>; Stephen Hemminger <stephen@networkplumber.org>; Richardson, Bruce <bruce.richardson@intel.com>; Slava Ovsiienko <viacheslavo@mellanox.com>; Andrey Vesnovaty <andrey.vesnovaty@gmail.com>; Marko Kovacevic <marko.kovacevic@intel.com>; Radu Nicolau <radu.nicolau@intel.com>; Akhil Goyal <akhil.goyal@nxp.com>; Tomasz Kantecki <tomasz.kantecki@intel.com>; Sunil Kumar Kori <skori@marvell.com>; Pavan Nikhilesh <pbhagavatula@marvell.com>; John McNamara <john.mcnamara@intel.com>
Subject: RE: [PATCH v2 6/6] examples/flow_filtering: utilize shared RSS action

Hi Andrey,

> -----Original Message-----
> From: Jerin Jacob <jerinjacobk@gmail.com>
> Sent: Thursday, July 9, 2020 7:44 AM
> To: Andrey Vesnovaty <andreyv@mellanox.com>
> Cc: dpdk-dev <dev@dpdk.org>; jer@marvell.com; Thomas Monjalon
> <thomas@monjalon.net>; Ferruh Yigit <ferruh.yigit@intel.com>; Stephen
> Hemminger <stephen@networkplumber.org>; Richardson, Bruce
> <bruce.richardson@intel.com>; Ori Kam <orika@mellanox.com>; Slava
> Ovsiienko <viacheslavo@mellanox.com>; Andrey Vesnovaty
> <andrey.vesnovaty@gmail.com>; Marko Kovacevic
> <marko.kovacevic@intel.com>; Radu Nicolau <radu.nicolau@intel.com>; Akhil
> Goyal <akhil.goyal@nxp.com>; Tomasz Kantecki <tomasz.kantecki@intel.com>;
> Sunil Kumar Kori <skori@marvell.com>; Pavan Nikhilesh
> <pbhagavatula@marvell.com>; John McNamara <john.mcnamara@intel.com>
> Subject: Re: [PATCH v2 6/6] examples/flow_filtering: utilize shared RSS action
> 
> On Thu, Jul 9, 2020 at 3:09 AM Andrey Vesnovaty <andreyv@mellanox.com>
> wrote:
> >
> > This commit gives very first shared RSS action usage example and
> > demonstrates shared action capability for in-place update.
> >
> > First application creates shared action during initialization phase.
> 
> What if PMD does not support a shared context, Then this application
> fails to run?
> if so, have a mode or probe the capability(if capability present then
> switches to new mode else fall back to old mode) before changing the
> application behavior.
> 
+1 the new action should be added as a new case and should run only if it is 
the shared action is supported.

> 
> > Later on the flow object created by application uses previously created
> > shared RSS action with 1 queue configured instead of queue action in
> > original application.
> >
> > On each RX queue burst shared RSS action reconfigured via
> > rte_flow_shared_action_update() API to switch queue 0 to 1 & 1 to 0.
> > User supposed to observe consistent queue switches on each packet burst.
> >
> > Signed-off-by: Andrey Vesnovaty <andreyv@mellanox.com>
> > ---
> >  doc/guides/sample_app_ug/flow_filtering.rst | 62 +++++++++++++++++----
> >  examples/flow_filtering/flow_blocks.c       | 30 +++++-----
> >  examples/flow_filtering/main.c              | 41 +++++++++++++-
> >  3 files changed, 105 insertions(+), 28 deletions(-)
> >
> > diff --git a/doc/guides/sample_app_ug/flow_filtering.rst
> b/doc/guides/sample_app_ug/flow_filtering.rst
> > index 5e5a6cd8a0..cfe9334717 100644
> > --- a/doc/guides/sample_app_ug/flow_filtering.rst
> > +++ b/doc/guides/sample_app_ug/flow_filtering.rst
> > @@ -106,7 +106,7 @@ following code:
> >  .. code-block:: c
> >
> >     /* create flow for send packet with */
> > -   flow = generate_ipv4_flow(port_id, selected_queue,
> > +   flow = generate_ipv4_flow(port_id, shared_action,
> >                                  SRC_IP, EMPTY_MASK,
> >                                  DEST_IP, FULL_MASK, &error);
> >     if (!flow) {
> > @@ -242,7 +242,7 @@ The Ethernet port is configured with default settings
> using the
> >     rxq_conf = dev_info.default_rxconf;
> >     rxq_conf.offloads = port_conf.rxmode.offloads;
> >
> > -For this example we are configuring number of rx and tx queues that are
> connected
> > +For this example we are configuring 2 rx and 2 tx queues that are connected
> >  to a single port.
> >
> >  .. code-block:: c
> > @@ -270,13 +270,22 @@ to a single port.
> >            }
> >     }
> >
> > +Before we create the flow we create shared action in order to send it as
> > +actions argument when creating a flow. The action is single queue RSS
> action
> > +similar to action queue with the only difference that shared RSS action
> > +provides update capability after action creation.
> > +
> > +.. code-block:: c
> > +
> > +   shared_action = rte_flow_shared_action_create(port_id, &action, &error);
> > +
> >  In the next step we create and apply the flow rule. which is to send packets
> >  with destination ip equals to 192.168.1.1 to queue number 1. The detail
> >  explanation of the ``generate_ipv4_flow()`` appears later in this document:
> >
> >  .. code-block:: c
> >
> > -   flow = generate_ipv4_flow(port_id, selected_queue,
> > +   flow = generate_ipv4_flow(port_id, shared_action,
> >                               SRC_IP, EMPTY_MASK,
> >                               DEST_IP, FULL_MASK, &error);
> >
> > @@ -339,6 +348,21 @@ looks like the following:
> >                                             printf("\n");
> >                                             rte_pktmbuf_free(m);
> >                                     }
> > +                                   if (rss_queue[0] == 0) {
> > +                                           printf(">>> switching queue 0 -> 1\n");
> > +                                           rss_queue[0] = 1;
> > +                                   } else {
> > +                                           printf(">>> switching queue 1 -> 0\n");
> > +                                           rss_queue[0] = 0;
> > +                                   }
> > +                                   ret = rte_flow_shared_action_update
> > +                                           (port_id, shared_action, &action,
> > +                                            &error);
> > +                                   if (ret)
> > +                                           rte_exit(EXIT_FAILURE,
> > +                                                    ":: error: RSS action update "
> > +                                                    "failed: %s\n",
> > +                                                    rte_strerror(-ret));
> >                             }
> >                     }
> >             }
> > @@ -348,6 +372,8 @@ looks like the following:
> >             rte_eth_dev_close(port_id);
> >     }
> >
> > +On each loop eteration Rx queue switched using
> > +``rte_flow_shared_action_update()`` API.
> >  The main work of the application is reading the packets from all
> >  queues and printing for each packet the destination queue:
> >
> > @@ -365,6 +391,21 @@ queues and printing for each packet the destination
> queue:
> >                               printf(" - queue=0x%x", (unsigned int)i);
> >                               printf("\n");
> >                               rte_pktmbuf_free(m);
> > +                             if (rss_queue[0] == 0) {
> > +                                     printf(">>> switching queue 0 -> 1\n");
> > +                                     rss_queue[0] = 1;
> > +                             } else {
> > +                                     printf(">>> switching queue 1 -> 0\n");
> > +                                     rss_queue[0] = 0;
> > +                             }
> > +                             ret = rte_flow_shared_action_update
> > +                                     (port_id, shared_action, &action,
> > +                                      &error);
> > +                             if (ret)
> > +                                     rte_exit(EXIT_FAILURE,
> > +                                              ":: error: RSS action update "
> > +                                              "failed: %s\n",
> > +                                              rte_strerror(-ret));
> >                          }
> >                  }
> >             }
> > @@ -378,13 +419,15 @@ The forwarding loop can be interrupted and the
> application closed using
> >  The generate_ipv4_flow function
> >  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > +
> >  The generate_ipv4_flow function is responsible for creating the flow rule.
> >  This function is located in the ``flow_blocks.c`` file.
> >
> >  .. code-block:: c
> >
> >     static struct rte_flow *
> > -   generate_ipv4_flow(uint8_t port_id, uint16_t rx_q,
> > +   generate_ipv4_flow(uint8_t port_id,
> > +                   cstructrte_flow_shared_action *shared_action,
> >                     uint32_t src_ip, uint32_t src_mask,
> >                     uint32_t dest_ip, uint32_t dest_mask,
> >                     struct rte_flow_error *error)
> > @@ -393,7 +436,6 @@ This function is located in the ``flow_blocks.c`` file.
> >             struct rte_flow_item pattern[MAX_PATTERN_NUM];
> >             struct rte_flow_action action[MAX_ACTION_NUM];
> >             struct rte_flow *flow = NULL;
> > -           struct rte_flow_action_queue queue = { .index = rx_q };
> >             struct rte_flow_item_ipv4 ip_spec;
> >             struct rte_flow_item_ipv4 ip_mask;
> >
> > @@ -411,8 +453,8 @@ This function is located in the ``flow_blocks.c`` file.
> >              * create the action sequence.
> >              * one action only,  move packet to queue
> >              */
> > -           action[0].type = RTE_FLOW_ACTION_TYPE_QUEUE;
> > -           action[0].conf = &queue;
> > +           action[0].type = RTE_FLOW_ACTION_TYPE_SHARED;
> > +           action[0].conf = shared_action;
> >             action[1].type = RTE_FLOW_ACTION_TYPE_END;
> >
> >             /*
> > @@ -468,12 +510,12 @@ The following part create the flow attributes, in
> our case ingress.
> >     attr.ingress = 1;
> >
> >  The third part defines the action to be taken when a packet matches
> > -the rule. In this case send the packet to queue.
> > +the rule. In this case send the packet to single RSS queue.
> >
> >  .. code-block:: c
> >
> > -   action[0].type = RTE_FLOW_ACTION_TYPE_QUEUE;
> > -   action[0].conf = &queue;
> > +   action[0].type = RTE_FLOW_ACTION_TYPE_SHARED;
> > +   action[0].conf = shared_action;
> >     action[1].type = RTE_FLOW_ACTION_TYPE_END;
> >
> >  The fourth part is responsible for creating the pattern and is built from
> > diff --git a/examples/flow_filtering/flow_blocks.c
> b/examples/flow_filtering/flow_blocks.c
> > index 575d792810..99bfed3172 100644
> > --- a/examples/flow_filtering/flow_blocks.c
> > +++ b/examples/flow_filtering/flow_blocks.c
> > @@ -6,11 +6,11 @@
> >  #define MAX_ACTION_NUM         2
> >
> >  struct rte_flow *
> > -generate_ipv4_flow(uint16_t port_id, uint16_t rx_q,
> > -               uint32_t src_ip, uint32_t src_mask,
> > -               uint32_t dest_ip, uint32_t dest_mask,
> > -               struct rte_flow_error *error);
> > -
> > +generate_ipv4_flow(uint16_t port_id,
> > +                  struct rte_flow_shared_action *shared_action,
> > +                  uint32_t src_ip, uint32_t src_mask,
> > +                  uint32_t dest_ip, uint32_t dest_mask,
> > +                  struct rte_flow_error *error);
> >
> >  /**
> >   * create a flow rule that sends packets with matching src and dest ip
> > @@ -18,8 +18,8 @@ generate_ipv4_flow(uint16_t port_id, uint16_t rx_q,
> >   *
> >   * @param port_id
> >   *   The selected port.
> > - * @param rx_q
> > - *   The selected target queue.
> > + * @param shared_action
> > + *   The shared RSS action with single queue
> >   * @param src_ip
> >   *   The src ip value to match the input packet.
> >   * @param src_mask
> > @@ -35,16 +35,16 @@ generate_ipv4_flow(uint16_t port_id, uint16_t rx_q,
> >   *   A flow if the rule could be created else return NULL.
> >   */
> >  struct rte_flow *
> > -generate_ipv4_flow(uint16_t port_id, uint16_t rx_q,
> > -               uint32_t src_ip, uint32_t src_mask,
> > -               uint32_t dest_ip, uint32_t dest_mask,
> > -               struct rte_flow_error *error)
> > +generate_ipv4_flow(uint16_t port_id,
> > +                  struct rte_flow_shared_action *shared_action,
> > +                  uint32_t src_ip, uint32_t src_mask,
> > +                  uint32_t dest_ip, uint32_t dest_mask,
> > +                  struct rte_flow_error *error)
> >  {
> >         struct rte_flow_attr attr;
> >         struct rte_flow_item pattern[MAX_PATTERN_NUM];
> >         struct rte_flow_action action[MAX_ACTION_NUM];
> >         struct rte_flow *flow = NULL;
> > -       struct rte_flow_action_queue queue = { .index = rx_q };
> >         struct rte_flow_item_ipv4 ip_spec;
> >         struct rte_flow_item_ipv4 ip_mask;
> >         int res;
> > @@ -61,10 +61,10 @@ generate_ipv4_flow(uint16_t port_id, uint16_t rx_q,
> >
> >         /*
> >          * create the action sequence.
> > -        * one action only,  move packet to queue
> > +        * one action only,  move packet to shared RSS queue
> >          */
> > -       action[0].type = RTE_FLOW_ACTION_TYPE_QUEUE;
> > -       action[0].conf = &queue;
> > +       action[0].type = RTE_FLOW_ACTION_TYPE_SHARED;
> > +       action[0].conf = shared_action;
> >         action[1].type = RTE_FLOW_ACTION_TYPE_END;
> >
> >         /*
> > diff --git a/examples/flow_filtering/main.c b/examples/flow_filtering/main.c
> > index cc9e7e7808..d6b18d95fc 100644
> > --- a/examples/flow_filtering/main.c
> > +++ b/examples/flow_filtering/main.c
> > @@ -32,8 +32,7 @@
> >  static volatile bool force_quit;
> >
> >  static uint16_t port_id;
> > -static uint16_t nr_queues = 5;
> > -static uint8_t selected_queue = 1;
> > +static uint16_t nr_queues = 2;
> >  struct rte_mempool *mbuf_pool;
> >  struct rte_flow *flow;
> >
> > @@ -42,6 +41,24 @@ struct rte_flow *flow;
> >  #define FULL_MASK 0xffffffff /* full mask */
> >  #define EMPTY_MASK 0x0 /* empty mask */
> >
> > +struct rte_flow_shared_action *shared_action;
> > +uint16_t rss_queue[1] = {0};
> > +
> > +struct rte_flow_action_rss action_rss = {
> > +               .func = RTE_ETH_HASH_FUNCTION_DEFAULT,
> > +               .level = 0,
> > +               .types = 0,
> > +               .key_len = 0,
> > +               .key = NULL,
> > +               .queue = rss_queue,
> > +               .queue_num = 1,
> > +};
> > +
> > +struct rte_flow_action action = {
> > +       .type = RTE_FLOW_ACTION_TYPE_RSS,
> > +       .conf = &action_rss,
> > +};
> > +
> >  #include "flow_blocks.c"
> >
> >  static inline void
> > @@ -61,6 +78,7 @@ main_loop(void)
> >         uint16_t nb_rx;
> >         uint16_t i;
> >         uint16_t j;
> > +       int ret;
> >
> >         while (!force_quit) {
> >                 for (i = 0; i < nr_queues; i++) {
> > @@ -82,6 +100,21 @@ main_loop(void)
> >
> >                                         rte_pktmbuf_free(m);
> >                                 }
> > +                               if (rss_queue[0] == 0) {
> > +                                       printf(">>> switching queue 0 -> 1\n");
> > +                                       rss_queue[0] = 1;
> > +                               } else {
> > +                                       printf(">>> switching queue 1 -> 0\n");
> > +                                       rss_queue[0] = 0;
> > +                               }
> > +                               ret = rte_flow_shared_action_update
> > +                                       (port_id, shared_action, &action,
> > +                                        &error);
> > +                               if (ret)
> > +                                       rte_exit(EXIT_FAILURE,
> > +                                                ":: error: RSS action update "
> > +                                                "failed: %s\n",
> > +                                                rte_strerror(-ret));
> >                         }
> >                 }
> >         }
> > @@ -243,8 +276,10 @@ main(int argc, char **argv)
> >
> >         init_port();
> >
> > +       shared_action = rte_flow_shared_action_create(port_id, &action,
> &error);
> > +
> >         /* create flow for send packet with */
> > -       flow = generate_ipv4_flow(port_id, selected_queue,
> > +       flow = generate_ipv4_flow(port_id, shared_action,
> >                                 SRC_IP, EMPTY_MASK,
> >                                 DEST_IP, FULL_MASK, &error);
> >         if (!flow) {
> > --
> > 2.26.2
> >

  reply	other threads:[~2020-07-09 12:25 UTC|newest]

Thread overview: 106+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-02 12:05 [dpdk-dev] [PATCH] add flow shared action API Andrey Vesnovaty
2020-07-03 15:02 ` Jerin Jacob
2020-07-03 15:21   ` Thomas Monjalon
2020-07-04  9:54     ` Andrey Vesnovaty
2020-07-04 10:10   ` Andrey Vesnovaty
2020-07-04 12:33     ` Jerin Jacob
2020-07-05 10:26       ` Ori Kam
2020-07-06  9:00         ` Jerin Jacob
2020-07-06 12:28           ` Ori Kam
2020-07-06 13:32             ` Andrey Vesnovaty
2020-07-07  2:30               ` Jerin Jacob
2020-07-07  6:21                 ` Ori Kam
2020-07-07 15:21                   ` Ferruh Yigit
2020-07-07 17:24                     ` Ori Kam
2020-07-07 17:52                       ` Ferruh Yigit
2020-07-07 19:38                   ` Jerin Jacob
2020-07-07 21:03                     ` Ori Kam
2020-07-08  9:25                       ` Jerin Jacob
2020-07-08  9:47                         ` Ori Kam
2020-07-08 11:00                           ` Jerin Jacob
2020-07-08 11:50                             ` Thomas Monjalon
2020-07-08 12:18                             ` Ori Kam
     [not found]                               ` <20200708204015.24429-2-andreyv@mellanox.com>
2020-07-13  8:04                                 ` [dpdk-dev] [PATCH v2 1/6] ethdev: " Kinsella, Ray
2020-07-13 10:16                                   ` Andrew Rybchenko
2020-07-15  8:54                                   ` Andrew Rybchenko
2020-07-15  9:00                                     ` Andrew Rybchenko
2020-09-15 11:30                                     ` Andrey Vesnovaty
     [not found]                               ` <20200708204015.24429-3-andreyv@mellanox.com>
2020-07-13  8:06                                 ` [dpdk-dev] [PATCH v2 2/6] common/mlx5: modify advanced Rx object via DevX Kinsella, Ray
2020-07-08 21:39 ` [dpdk-dev] [PATCH v2 0/6] add flow shared action API + PMD Andrey Vesnovaty
2020-07-08 21:39   ` [dpdk-dev] [PATCH v2 1/6] ethdev: add flow shared action API Andrey Vesnovaty
2020-09-12  2:18     ` Ajit Khaparde
2020-09-15 11:50       ` Andrey Vesnovaty
2020-09-15 15:49         ` Ajit Khaparde
2020-09-16 15:52           ` Andrey Vesnovaty
2020-09-16 19:20             ` Ajit Khaparde
2020-09-17 15:33               ` Andrew Rybchenko
2020-09-17 16:02                 ` Ori Kam
2020-09-24 19:25                   ` Ajit Khaparde
2020-09-26 11:09                     ` Andrey Vesnovaty
2020-10-03 22:06                       ` [dpdk-dev] [PATCH v3 00/10] RTE flow shared action Andrey Vesnovaty
2020-10-03 22:06                         ` [dpdk-dev] [PATCH v3 01/10] ethdev: add flow shared action API Andrey Vesnovaty
2020-10-04 11:10                           ` Ori Kam
2020-10-06 10:22                             ` Andrey Vesnovaty
2020-10-04 17:00                           ` Stephen Hemminger
2020-10-04 17:01                             ` Stephen Hemminger
2020-10-03 22:06                         ` [dpdk-dev] [PATCH v3 02/10] ethdev: add conf arg to shared action icreate API Andrey Vesnovaty
2020-10-04 11:11                           ` Ori Kam
2020-10-06 10:28                             ` Andrey Vesnovaty
2020-10-03 22:06                         ` [dpdk-dev] [PATCH v3 03/10] common/mlx5: modify advanced Rx object via DevX Andrey Vesnovaty
2020-10-03 22:06                         ` [dpdk-dev] [PATCH v3 04/10] net/mlx5: modify hash Rx queue objects Andrey Vesnovaty
2020-10-03 22:06                         ` [dpdk-dev] [PATCH v3 05/10] net/mlx5: shared action PMD Andrey Vesnovaty
2020-10-03 22:06                         ` [dpdk-dev] [PATCH v3 06/10] net/mlx5: shared action PMD create conf arg Andrey Vesnovaty
2020-10-03 22:06                         ` [dpdk-dev] [PATCH v3 07/10] net/mlx5: driver support for shared action Andrey Vesnovaty
2020-10-03 22:06                         ` [dpdk-dev] [PATCH v3 08/10] net/mlx5: shared action create conf drv support Andrey Vesnovaty
2020-10-03 22:06                         ` [dpdk-dev] [PATCH v3 09/10] examples/flow_filtering: utilize shared RSS action Andrey Vesnovaty
2020-10-04 11:21                           ` Ori Kam
2020-10-06 10:34                             ` Andrey Vesnovaty
2020-10-03 22:06                         ` [dpdk-dev] [PATCH v3 10/10] app/testpmd: support shared action Andrey Vesnovaty
2020-10-04 11:28                           ` Ori Kam
2020-10-04 12:04                             ` Ori Kam
2020-10-06 10:36                               ` Andrey Vesnovaty
2020-10-04 11:14                         ` [dpdk-dev] [PATCH v3 00/10] RTE flow " Ori Kam
2020-10-06 10:28                           ` Andrey Vesnovaty
2020-07-08 21:39   ` [dpdk-dev] [PATCH v2 2/6] common/mlx5: modify advanced Rx object via DevX Andrey Vesnovaty
2020-07-08 21:39   ` [dpdk-dev] [PATCH v2 3/6] net/mlx5: modify hash Rx queue objects Andrey Vesnovaty
2020-07-08 21:39   ` [dpdk-dev] [PATCH v2 4/6] net/mlx5: shared action PMD Andrey Vesnovaty
2020-07-08 21:39   ` [dpdk-dev] [PATCH v2 5/6] net/mlx5: driver support for shared action Andrey Vesnovaty
2020-07-08 21:39   ` [dpdk-dev] [PATCH v2 6/6] examples/flow_filtering: utilize shared RSS action Andrey Vesnovaty
2020-07-09  4:44     ` Jerin Jacob
2020-07-09  6:08       ` Ori Kam
2020-07-09 12:25         ` Andrey Vesnovaty [this message]
2020-07-09 12:39           ` Thomas Monjalon
2020-07-09  4:39   ` [dpdk-dev] [PATCH v2 0/6] add flow shared action API + PMD Jerin Jacob
2020-10-06 20:08 ` [dpdk-dev] [PATCH v4 0/2] RTE flow shared action Andrey Vesnovaty
2020-10-06 20:08   ` [dpdk-dev] [PATCH v4 1/2] ethdev: add flow shared action API Andrey Vesnovaty
2020-10-07  6:27     ` Ori Kam
2020-10-06 20:08   ` [dpdk-dev] [PATCH v4 2/2] app/testpmd: support shared action Andrey Vesnovaty
2020-10-07  6:30     ` Ori Kam
2020-10-07 12:56 ` [dpdk-dev] [PATCH v5 0/2] RTE flow " Andrey Vesnovaty
2020-10-07 12:56   ` [dpdk-dev] [PATCH v5 1/2] ethdev: add flow shared action API Andrey Vesnovaty
2020-10-07 13:01     ` Ori Kam
2020-10-07 21:23     ` Ajit Khaparde
2020-10-08  7:28       ` Andrey Vesnovaty
2020-10-07 12:56   ` [dpdk-dev] [PATCH v5 2/2] app/testpmd: support shared action Andrey Vesnovaty
2020-10-07 18:36 ` [dpdk-dev] [PATCH v6 0/2] RTE flow " Andrey Vesnovaty
2020-10-07 18:36   ` [dpdk-dev] [PATCH v6 1/2] ethdev: add flow shared action API Andrey Vesnovaty
2020-10-07 18:36   ` [dpdk-dev] [PATCH v6 2/2] app/testpmd: support shared action Andrey Vesnovaty
2020-10-07 20:01     ` Ajit Khaparde
2020-10-08 10:58       ` Andrey Vesnovaty
2020-10-08 11:51 ` [dpdk-dev] [PATCH v7 0/2] RTE flow " Andrey Vesnovaty
2020-10-08 11:51   ` [dpdk-dev] [PATCH v7 1/2] ethdev: add flow shared action API Andrey Vesnovaty
2020-10-08 22:30     ` Ajit Khaparde
2020-10-14 11:47       ` Andrey Vesnovaty
2020-10-12 14:19     ` Andrew Rybchenko
2020-10-13 20:06       ` Andrey Vesnovaty
2020-10-14  6:49         ` Andrew Rybchenko
2020-10-14  7:22           ` Thomas Monjalon
2020-10-14 11:43             ` Andrey Vesnovaty
2020-10-14 11:42           ` Andrey Vesnovaty
2020-10-08 11:51   ` [dpdk-dev] [PATCH v7 2/2] app/testpmd: support shared action Andrey Vesnovaty
2020-10-08 23:54     ` Ajit Khaparde
2020-10-14 11:40 ` [dpdk-dev] [PATCH v8 0/2] RTE flow " Andrey Vesnovaty
2020-10-14 11:40   ` [dpdk-dev] [PATCH v8 1/2] ethdev: add shared actions to flow API Andrey Vesnovaty
2020-10-14 11:44     ` Andrew Rybchenko
2020-10-14 16:17       ` Ferruh Yigit
2020-10-14 11:40   ` [dpdk-dev] [PATCH v8 2/2] app/testpmd: support shared action Andrey Vesnovaty

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AM6PR0502MB3989D3E1CEFD2E2161554749D6640@AM6PR0502MB3989.eurprd05.prod.outlook.com \
    --to=andreyv@mellanox.com \
    --cc=akhil.goyal@nxp.com \
    --cc=andrey.vesnovaty@gmail.com \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=jer@marvell.com \
    --cc=jerinj@marvell.com \
    --cc=john.mcnamara@intel.com \
    --cc=marko.kovacevic@intel.com \
    --cc=orika@mellanox.com \
    --cc=pbhagavatula@marvell.com \
    --cc=radu.nicolau@intel.com \
    --cc=skori@marvell.com \
    --cc=stephen@networkplumber.org \
    --cc=thomas@monjalon.net \
    --cc=tomasz.kantecki@intel.com \
    --cc=viacheslavo@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.