* [U-Boot] [GIT PULL] Please pull u-boot-mpc85xx.git
@ 2011-05-19 7:18 Kumar Gala
2011-05-19 19:31 ` Wolfgang Denk
0 siblings, 1 reply; 18+ messages in thread
From: Kumar Gala @ 2011-05-19 7:18 UTC (permalink / raw)
To: u-boot
The following changes since commit 0ea91423f47461bf7eaed2d4aff198076dd07fd5:
Merge branch 'master' of git://git.denx.de/u-boot-arm (2011-05-18 14:31:56 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git master
Shaohui Xie (2):
powerpc/85xx: Enable eSPI support on corenet ds boards
powerpc/85xx: add support for env in MMC/SPI on corenet ds boards
board/freescale/common/Makefile | 2 +
boards.cfg | 7 +++++-
include/configs/corenet_ds.h | 40 +++++++++++++++++++++++++++++++-------
3 files changed, 40 insertions(+), 9 deletions(-)
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mpc85xx.git
2011-05-19 7:18 [U-Boot] [GIT PULL] Please pull u-boot-mpc85xx.git Kumar Gala
@ 2011-05-19 19:31 ` Wolfgang Denk
2011-05-19 19:48 ` Kumar Gala
0 siblings, 1 reply; 18+ messages in thread
From: Wolfgang Denk @ 2011-05-19 19:31 UTC (permalink / raw)
To: u-boot
Dear Kumar Gala,
In message <alpine.LFD.2.00.1105190218380.10786@right.am.freescale.net> you wrote:
> The following changes since commit 0ea91423f47461bf7eaed2d4aff198076dd07fd5:
>
> Merge branch 'master' of git://git.denx.de/u-boot-arm (2011-05-18 14:31:56 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mpc85xx.git master
>
> Shaohui Xie (2):
> powerpc/85xx: Enable eSPI support on corenet ds boards
> powerpc/85xx: add support for env in MMC/SPI on corenet ds boards
>
> board/freescale/common/Makefile | 2 +
> boards.cfg | 7 +++++-
> include/configs/corenet_ds.h | 40 +++++++++++++++++++++++++++++++-------
> 3 files changed, 40 insertions(+), 9 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"We learn from history that we learn nothing from history."
- George Bernard Shaw
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mpc85xx.git
2011-05-19 19:31 ` Wolfgang Denk
@ 2011-05-19 19:48 ` Kumar Gala
0 siblings, 0 replies; 18+ messages in thread
From: Kumar Gala @ 2011-05-19 19:48 UTC (permalink / raw)
To: u-boot
On May 19, 2011, at 2:31 PM, Wolfgang Denk wrote:
> Dear Kumar Gala,
>
> In message <alpine.LFD.2.00.1105190218380.10786@right.am.freescale.net> you wrote:
>> The following changes since commit 0ea91423f47461bf7eaed2d4aff198076dd07fd5:
>>
>> Merge branch 'master' of git://git.denx.de/u-boot-arm (2011-05-18 14:31:56 +0200)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-mpc85xx.git master
>>
>> Shaohui Xie (2):
>> powerpc/85xx: Enable eSPI support on corenet ds boards
>> powerpc/85xx: add support for env in MMC/SPI on corenet ds boards
>>
>> board/freescale/common/Makefile | 2 +
>> boards.cfg | 7 +++++-
>> include/configs/corenet_ds.h | 40 +++++++++++++++++++++++++++++++-------
>> 3 files changed, 40 insertions(+), 9 deletions(-)
>
> Applied, thanks.
>
> Best regards,
>
> Wolfgang Denk
thanks for pulling these in for this release.
- k
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mpc85xx.git
2011-05-26 14:33 Kumar Gala
@ 2011-06-01 20:01 ` Wolfgang Denk
0 siblings, 0 replies; 18+ messages in thread
From: Wolfgang Denk @ 2011-06-01 20:01 UTC (permalink / raw)
To: u-boot
Dear Kumar Gala,
In message <alpine.LFD.2.00.1105260933070.20258@right.am.freescale.net> you wrote:
> The following changes since commit 7a82c208143bbc774ffcb4e53239410f867a0794:
>
> Prepare v2011.06-rc1 (2011-05-19 22:23:50 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-mpc85xx.git master
>
> Kumar Gala (1):
> powerpc/fsl_pci: Fix device tree fixups for newer platforms
>
> README | 5 +++++
> arch/powerpc/include/asm/config_mpc85xx.h | 9 +++++++++
> arch/powerpc/include/asm/fsl_pci.h | 6 +++++-
> 3 files changed, 19 insertions(+), 1 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
To know how another being, another creature feels - that is impos-
sible. - Terry Pratchett, _The Dark Side of the Sun_
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mpc85xx.git
@ 2011-05-26 14:33 Kumar Gala
2011-06-01 20:01 ` Wolfgang Denk
0 siblings, 1 reply; 18+ messages in thread
From: Kumar Gala @ 2011-05-26 14:33 UTC (permalink / raw)
To: u-boot
The following changes since commit 7a82c208143bbc774ffcb4e53239410f867a0794:
Prepare v2011.06-rc1 (2011-05-19 22:23:50 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git master
Kumar Gala (1):
powerpc/fsl_pci: Fix device tree fixups for newer platforms
README | 5 +++++
arch/powerpc/include/asm/config_mpc85xx.h | 9 +++++++++
arch/powerpc/include/asm/fsl_pci.h | 6 +++++-
3 files changed, 19 insertions(+), 1 deletions(-)
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mpc85xx.git
2011-05-19 5:19 ` Wolfgang Denk
@ 2011-05-19 6:49 ` Kumar Gala
0 siblings, 0 replies; 18+ messages in thread
From: Kumar Gala @ 2011-05-19 6:49 UTC (permalink / raw)
To: u-boot
On May 19, 2011, at 12:19 AM, Wolfgang Denk wrote:
> Dear Kumar Gala,
>
> In message <6E487A2B-B7EA-474E-A8DB-0D5639391078@kernel.crashing.org> you wrote:
>>
>>> Sorry - most of these patches were submitted about a month after the
>>> merge window was closed, and they clearly add new features, i. e.
>>> these are not bug fixes. They will not go into this release.
>>>
>>> Not pulled.
>>>
>>> Please stick to the rules!
>>
>> Understood, however I would like to see the eSPI & MMC/SPI patches go
>> into this release as it prevents introduction of a build target
>> 'P4080DS_RAMBOOT_PBL' that we remove right away after the release. As
>> these two patches only impact a FSL specific board the risk is limited
>> to the one board family.
>
> I can't parse that. "It prevents introduction of a build target
> 'P4080DS_RAMBOOT_PBL'' - but we already have that in mainline?
> "that we remove right away after the release" - if you remove it after
> the release, then it should be sufficient to add these patches after
> right before the removal of this thing?
I'm saying previous patches that went into this window added the build target P4080DS_RAMBOOT_PBL. Rather than having this release add it and the next one remove, I'd prefer to just have these two patches applied for this release cycle to have the targets for _SPIFLASH and _SDCARD boot.
> I don't consider this a bug fix.
I know its not a bug fix.
- k
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mpc85xx.git
2011-05-19 4:00 ` Kumar Gala
@ 2011-05-19 5:19 ` Wolfgang Denk
2011-05-19 6:49 ` Kumar Gala
0 siblings, 1 reply; 18+ messages in thread
From: Wolfgang Denk @ 2011-05-19 5:19 UTC (permalink / raw)
To: u-boot
Dear Kumar Gala,
In message <6E487A2B-B7EA-474E-A8DB-0D5639391078@kernel.crashing.org> you wrote:
>
> > Sorry - most of these patches were submitted about a month after the
> > merge window was closed, and they clearly add new features, i. e.
> > these are not bug fixes. They will not go into this release.
> >
> > Not pulled.
> >
> > Please stick to the rules!
>
> Understood, however I would like to see the eSPI & MMC/SPI patches go
> into this release as it prevents introduction of a build target
> 'P4080DS_RAMBOOT_PBL' that we remove right away after the release. As
> these two patches only impact a FSL specific board the risk is limited
> to the one board family.
I can't parse that. "It prevents introduction of a build target
'P4080DS_RAMBOOT_PBL'' - but we already have that in mainline?
"that we remove right away after the release" - if you remove it after
the release, then it should be sufficient to add these patches after
right before the removal of this thing?
I don't consider this a bug fix.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> Is there a way to determine Yesterday's date using Unix utilities?
echo "what is yesterday's date?" | /bin/mail root
-- Randal L. Schwartz in <ukbuh2y982.fsf@julie.teleport.com>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mpc85xx.git
2011-05-18 21:17 ` Wolfgang Denk
@ 2011-05-19 4:00 ` Kumar Gala
2011-05-19 5:19 ` Wolfgang Denk
0 siblings, 1 reply; 18+ messages in thread
From: Kumar Gala @ 2011-05-19 4:00 UTC (permalink / raw)
To: u-boot
On May 18, 2011, at 4:17 PM, Wolfgang Denk wrote:
> Dear Kumar Gala,
>
> In message <alpine.LFD.2.00.1105180943350.20926@right.am.freescale.net> you wrote:
>> The following changes since commit 0ea91423f47461bf7eaed2d4aff198076dd07fd5:
>>
>> Merge branch 'master' of git://git.denx.de/u-boot-arm (2011-05-18 14:31:56 +0200)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-mpc85xx.git master
>>
>> Kumar Gala (1):
>> powerpc/85xx: Add P2041 processor support
>
> Submitted 05/13.
>
>> Mingkai Hu (1):
>> powerpc/p2040: Add various p2040 specific information
>>
>> Ramneek Mehresh (1):
>> qoriq/p1_p2_rdb: Add Dual Role USB support macro for P1020RDB
>
> Submitted 05/10
>
>> Shaohui Xie (2):
>> powerpc/85xx: Enable eSPI support on corenet ds boards
>
> Submitted 05/12
>
>> powerpc/85xx: add support for env in MMC/SPI on corenet ds boards
>
> Submitted 05/12
>
>
> Sorry - most of these patches were submitted about a month after the
> merge window was closed, and they clearly add new features, i. e.
> these are not bug fixes. They will not go into this release.
>
> Not pulled.
>
> Please stick to the rules!
Understood, however I would like to see the eSPI & MMC/SPI patches go into this release as it prevents introduction of a build target 'P4080DS_RAMBOOT_PBL' that we remove right away after the release. As these two patches only impact a FSL specific board the risk is limited to the one board family.
- k
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mpc85xx.git
2011-05-18 14:45 Kumar Gala
@ 2011-05-18 21:17 ` Wolfgang Denk
2011-05-19 4:00 ` Kumar Gala
0 siblings, 1 reply; 18+ messages in thread
From: Wolfgang Denk @ 2011-05-18 21:17 UTC (permalink / raw)
To: u-boot
Dear Kumar Gala,
In message <alpine.LFD.2.00.1105180943350.20926@right.am.freescale.net> you wrote:
> The following changes since commit 0ea91423f47461bf7eaed2d4aff198076dd07fd5:
>
> Merge branch 'master' of git://git.denx.de/u-boot-arm (2011-05-18 14:31:56 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mpc85xx.git master
>
> Kumar Gala (1):
> powerpc/85xx: Add P2041 processor support
Submitted 05/13.
> Mingkai Hu (1):
> powerpc/p2040: Add various p2040 specific information
>
> Ramneek Mehresh (1):
> qoriq/p1_p2_rdb: Add Dual Role USB support macro for P1020RDB
Submitted 05/10
> Shaohui Xie (2):
> powerpc/85xx: Enable eSPI support on corenet ds boards
Submitted 05/12
> powerpc/85xx: add support for env in MMC/SPI on corenet ds boards
Submitted 05/12
Sorry - most of these patches were submitted about a month after the
merge window was closed, and they clearly add new features, i. e.
these are not bug fixes. They will not go into this release.
Not pulled.
Please stick to the rules!
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The management question ... is not _whether_ to build a pilot system
and throw it away. You _will_ do that. The only question is whether
to plan in advance to build a throwaway, or to promise to deliver the
throwaway to customers. - Fred Brooks, "The Mythical Man Month"
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mpc85xx.git
@ 2011-05-18 14:45 Kumar Gala
2011-05-18 21:17 ` Wolfgang Denk
0 siblings, 1 reply; 18+ messages in thread
From: Kumar Gala @ 2011-05-18 14:45 UTC (permalink / raw)
To: u-boot
The following changes since commit 0ea91423f47461bf7eaed2d4aff198076dd07fd5:
Merge branch 'master' of git://git.denx.de/u-boot-arm (2011-05-18 14:31:56 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git master
Kumar Gala (1):
powerpc/85xx: Add P2041 processor support
Mingkai Hu (1):
powerpc/p2040: Add various p2040 specific information
Ramneek Mehresh (1):
qoriq/p1_p2_rdb: Add Dual Role USB support macro for P1020RDB
Shaohui Xie (2):
powerpc/85xx: Enable eSPI support on corenet ds boards
powerpc/85xx: add support for env in MMC/SPI on corenet ds boards
arch/powerpc/cpu/mpc85xx/Makefile | 6 ++
arch/powerpc/cpu/mpc85xx/p2040_ids.c | 106 +++++++++++++++++++++++++++++
arch/powerpc/cpu/mpc85xx/p2040_serdes.c | 24 +++++++
arch/powerpc/cpu/mpc8xxx/cpu.c | 2 +
arch/powerpc/include/asm/config_mpc85xx.h | 15 ++++
arch/powerpc/include/asm/processor.h | 2 +
board/freescale/common/Makefile | 2 +
boards.cfg | 7 ++-
include/configs/P1_P2_RDB.h | 1 +
include/configs/corenet_ds.h | 40 +++++++++--
10 files changed, 196 insertions(+), 9 deletions(-)
create mode 100644 arch/powerpc/cpu/mpc85xx/p2040_ids.c
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mpc85xx.git
2011-02-11 5:46 Kumar Gala
@ 2011-02-11 20:24 ` Wolfgang Denk
0 siblings, 0 replies; 18+ messages in thread
From: Wolfgang Denk @ 2011-02-11 20:24 UTC (permalink / raw)
To: u-boot
Dear Kumar Gala,
In message <Pine.LNX.4.64.1102102344240.18114@localhost.localdomain> you wrote:
> Some fixes for v2011.03:
>
> The following changes since commit 494a7d215bfba17f1a94736df40c332c8713c30e:
> Wolfgang Denk (1):
> Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mpc85xx master
>
> Kumar Gala (1):
> powerpc/85xx: Fix p1_p2_rdb boards.cfg
>
> Priyanka Jain (1):
> powerpc/85xx: corrected p1_p2_rdb EEPROM address
>
> Timur Tabi (1):
> fsl: update CRC after setting EEPROM identifier
>
> York Sun (1):
> powerpc/8xxx: Add additional cycle to write-to-read turnaound for DDR3
>
> arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 3 +++
> arch/powerpc/cpu/mpc8xxx/ddr/ddr.h | 2 +-
> board/freescale/common/sys_eeprom.c | 1 +
> boards.cfg | 26 +++++++++++++-------------
> include/configs/P1_P2_RDB.h | 3 +--
> 5 files changed, 19 insertions(+), 16 deletions(-)
Applied, Thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A morsel of genuine history is a thing so rare as to be always
valuable. - Thomas Jefferson
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mpc85xx.git
@ 2011-02-11 5:46 Kumar Gala
2011-02-11 20:24 ` Wolfgang Denk
0 siblings, 1 reply; 18+ messages in thread
From: Kumar Gala @ 2011-02-11 5:46 UTC (permalink / raw)
To: u-boot
Some fixes for v2011.03:
The following changes since commit 494a7d215bfba17f1a94736df40c332c8713c30e:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx master
Kumar Gala (1):
powerpc/85xx: Fix p1_p2_rdb boards.cfg
Priyanka Jain (1):
powerpc/85xx: corrected p1_p2_rdb EEPROM address
Timur Tabi (1):
fsl: update CRC after setting EEPROM identifier
York Sun (1):
powerpc/8xxx: Add additional cycle to write-to-read turnaound for DDR3
arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 3 +++
arch/powerpc/cpu/mpc8xxx/ddr/ddr.h | 2 +-
board/freescale/common/sys_eeprom.c | 1 +
boards.cfg | 26 +++++++++++++-------------
include/configs/P1_P2_RDB.h | 3 +--
5 files changed, 19 insertions(+), 16 deletions(-)
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mpc85xx.git
2011-01-27 6:49 Kumar Gala
@ 2011-01-31 22:20 ` Wolfgang Denk
0 siblings, 0 replies; 18+ messages in thread
From: Wolfgang Denk @ 2011-01-31 22:20 UTC (permalink / raw)
To: u-boot
Dear Kumar Gala,
In message <Pine.LNX.4.64.1101270047110.28816@localhost.localdomain> you wrote:
> A bug fix, and I felt that Alex had published code well ahead of merge
> window close that this was reasonable to go in (and new board so isn't
> going to break anything).
>
> The following changes since commit 8aba9dceebb14144e07d19593111ee3a999c37fc:
>
> Divides variable of linker flags to LDFLAGS-u-boot and LDFLAGS (2011-01-25 22:22:30 +0100)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-mpc85xx master
>
> Alex Dubov (1):
> mpq101: initial support for Mercury Computer Systems MPQ101 board
>
> York Sun (1):
> p1022ds: fix pixis_reset altbank
>
> MAINTAINERS | 4 +
> board/mercury/mpq101/Makefile | 53 ++++++
> board/mercury/mpq101/law.c | 52 +++++
> board/mercury/mpq101/mpq101.c | 129 +++++++++++++
> board/mercury/mpq101/tlb.c | 82 ++++++++
> board/mercury/mpq101/u-boot.lds | 132 +++++++++++++
> boards.cfg | 1 +
> include/configs/P1022DS.h | 2 +-
> include/configs/mpq101.h | 394 +++++++++++++++++++++++++++++++++++++++
> 9 files changed, 848 insertions(+), 1 deletions(-)
> create mode 100644 board/mercury/mpq101/Makefile
> create mode 100644 board/mercury/mpq101/law.c
> create mode 100644 board/mercury/mpq101/mpq101.c
> create mode 100644 board/mercury/mpq101/tlb.c
> create mode 100644 board/mercury/mpq101/u-boot.lds
> create mode 100644 include/configs/mpq101.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The use of anthropomorphic terminology when dealing with computing
systems is a symptom of professional immaturity. -- Edsger Dijkstra
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mpc85xx.git
@ 2011-01-27 6:49 Kumar Gala
2011-01-31 22:20 ` Wolfgang Denk
0 siblings, 1 reply; 18+ messages in thread
From: Kumar Gala @ 2011-01-27 6:49 UTC (permalink / raw)
To: u-boot
A bug fix, and I felt that Alex had published code well ahead of merge
window close that this was reasonable to go in (and new board so isn't
going to break anything).
The following changes since commit 8aba9dceebb14144e07d19593111ee3a999c37fc:
Divides variable of linker flags to LDFLAGS-u-boot and LDFLAGS (2011-01-25 22:22:30 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx master
Alex Dubov (1):
mpq101: initial support for Mercury Computer Systems MPQ101 board
York Sun (1):
p1022ds: fix pixis_reset altbank
MAINTAINERS | 4 +
board/mercury/mpq101/Makefile | 53 ++++++
board/mercury/mpq101/law.c | 52 +++++
board/mercury/mpq101/mpq101.c | 129 +++++++++++++
board/mercury/mpq101/tlb.c | 82 ++++++++
board/mercury/mpq101/u-boot.lds | 132 +++++++++++++
boards.cfg | 1 +
include/configs/P1022DS.h | 2 +-
include/configs/mpq101.h | 394 +++++++++++++++++++++++++++++++++++++++
9 files changed, 848 insertions(+), 1 deletions(-)
create mode 100644 board/mercury/mpq101/Makefile
create mode 100644 board/mercury/mpq101/law.c
create mode 100644 board/mercury/mpq101/mpq101.c
create mode 100644 board/mercury/mpq101/tlb.c
create mode 100644 board/mercury/mpq101/u-boot.lds
create mode 100644 include/configs/mpq101.h
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mpc85xx.git
2011-01-20 5:01 Kumar Gala
2011-01-20 8:00 ` Kumar Gala
@ 2011-01-25 20:13 ` Wolfgang Denk
1 sibling, 0 replies; 18+ messages in thread
From: Wolfgang Denk @ 2011-01-25 20:13 UTC (permalink / raw)
To: u-boot
Dear Kumar Gala,
In message <Pine.LNX.4.64.1101192300530.993@localhost.localdomain> you wrote:
> The following changes since commit e1ccf97c5d7651664d37c0c5aa243874b8851b2d:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2011-01-17 20:31:46 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mpc85xx master
>
> Dipen Dudhat (1):
> powerpc/85xx: Protect all LBC code with CONFIG_FSL_LBC
>
> Haiying Wang (1):
> 8xxx/ddr: add support to only compute the ddr sdram size
>
> Kumar Gala (6):
> powerpc/85xx: Move RESET_VECTOR_ADDRESS into config.h
> powerpc/p3041: Add various p3041 specific information
> powerpc/p5020: Add various p5020 specific information
> powerpc/p2040: Add various p2040 specific information
> powerpc/8xxx: Add hwconfig APIs to address early parsing used by DDR init
> powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers
>
> Poonam Aggrwal (2):
> powerpc/85xx: Add Support for Freescale P1010 Processor
> powerpc/85xx: Add Support for Freescale P1014 Processor
>
> Prabhakar (1):
> Fix wrong CONFIG_SYS_MPC85xx_SERDES1_ADDR
>
> Prabhakar Kushwaha (1):
> ppc/85xx: Fix compile err when PCI disabled on P1_P2_RDB
>
> York Sun (8):
> mpc8xxx: Display RDIMM if detected
> mpc8xxx: Enable ECC on/off control in hwconfig
> corenet_ds: Enable ECC for corenet_ds
> mpc85xx: Adding more registers and options
> mpc85xx: Enable unique mode registers and dynamic ODT for DDR3
> mpc85xx: Implement workaround for erratum DDR-A003
> corenet_ds: Extend board specific parameters
> powerpc/p4080: Fix warning in serdes code from early use of hwconfig
>
> arch/powerpc/cpu/mpc85xx/Makefile | 6 +
> arch/powerpc/cpu/mpc85xx/cmd_errata.c | 3 +
> arch/powerpc/cpu/mpc85xx/cpu.c | 9 +-
> arch/powerpc/cpu/mpc85xx/ddr-gen3.c | 99 +++++-
> arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 17 +-
> arch/powerpc/cpu/mpc85xx/p2040_serdes.c | 66 ++++
> arch/powerpc/cpu/mpc85xx/p3041_ids.c | 105 ++++++
> arch/powerpc/cpu/mpc85xx/p3041_serdes.c | 151 ++++++++
> arch/powerpc/cpu/mpc85xx/p5020_ids.c | 105 ++++++
> arch/powerpc/cpu/mpc85xx/p5020_serdes.c | 151 ++++++++
> arch/powerpc/cpu/mpc85xx/speed.c | 6 +-
> arch/powerpc/cpu/mpc85xx/u-boot.lds | 8 +-
> arch/powerpc/cpu/mpc8xxx/cpu.c | 8 +-
> arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 262 +++++++++++---
> arch/powerpc/cpu/mpc8xxx/ddr/ddr.h | 8 +-
> .../cpu/mpc8xxx/ddr/lc_common_dimm_params.c | 20 +-
> arch/powerpc/cpu/mpc8xxx/ddr/main.c | 31 ++-
> arch/powerpc/cpu/mpc8xxx/ddr/options.c | 395 ++++++++++++++++++--
> arch/powerpc/include/asm/config.h | 39 +--
> arch/powerpc/include/asm/config_mpc85xx.h | 188 ++++++++++
> arch/powerpc/include/asm/config_mpc86xx.h | 38 ++
> arch/powerpc/include/asm/fsl_ddr_sdram.h | 52 +++
> arch/powerpc/include/asm/immap_85xx.h | 23 +-
> arch/powerpc/include/asm/processor.h | 6 +
> board/freescale/corenet_ds/config.mk | 27 --
> board/freescale/corenet_ds/ddr.c | 159 ++++----
> board/freescale/mpc8536ds/config.mk | 14 +-
> board/freescale/mpc8572ds/config.mk | 4 +-
> board/freescale/p1022ds/config.mk | 10 -
> board/freescale/p1_p2_rdb/config.mk | 14 +-
> board/freescale/p1_p2_rdb/p1_p2_rdb.c | 4 +-
> board/freescale/p1_p2_rdb/tlb.c | 4 +-
> board/freescale/p2020ds/config.mk | 26 --
> board/tqc/tqm85xx/sdram.c | 8 +-
> common/hwconfig.c | 86 +++--
> doc/README.fsl-ddr | 74 ++++-
> drivers/misc/fsl_law.c | 23 +-
> include/configs/MPC8536DS.h | 6 +
> include/configs/MPC8572DS.h | 4 +
> include/configs/P1022DS.h | 4 +
> include/configs/P1_P2_RDB.h | 19 +-
> include/configs/P2020DS.h | 4 +
> include/configs/P4080DS.h | 16 -
> include/configs/corenet_ds.h | 8 +-
> include/hwconfig.h | 68 +++-
> 45 files changed, 1940 insertions(+), 438 deletions(-)
> create mode 100644 arch/powerpc/cpu/mpc85xx/p2040_serdes.c
> create mode 100644 arch/powerpc/cpu/mpc85xx/p3041_ids.c
> create mode 100644 arch/powerpc/cpu/mpc85xx/p3041_serdes.c
> create mode 100644 arch/powerpc/cpu/mpc85xx/p5020_ids.c
> create mode 100644 arch/powerpc/cpu/mpc85xx/p5020_serdes.c
> create mode 100644 arch/powerpc/include/asm/config_mpc85xx.h
> create mode 100644 arch/powerpc/include/asm/config_mpc86xx.h
> delete mode 100644 board/freescale/corenet_ds/config.mk
> delete mode 100644 board/freescale/p1022ds/config.mk
> delete mode 100644 board/freescale/p2020ds/config.mk
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is dangerous to be right on a subject on which the established
authorities are wrong. -- Voltaire
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mpc85xx.git
2011-01-20 8:00 ` Kumar Gala
@ 2011-01-23 17:12 ` Kumar Gala
0 siblings, 0 replies; 18+ messages in thread
From: Kumar Gala @ 2011-01-23 17:12 UTC (permalink / raw)
To: u-boot
On Jan 20, 2011, at 2:00 AM, Kumar Gala wrote:
>
> On Jan 19, 2011, at 11:01 PM, Kumar Gala wrote:
>
>> The following changes since commit e1ccf97c5d7651664d37c0c5aa243874b8851b2d:
>>
>> Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2011-01-17 20:31:46 +0100)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-mpc85xx master
>>
>
> Updated to include:
>
> Kumar Gala (1):
> powerpc/8xxx: Fix compile warning when build for a DDR1 or DDR2 board
poke
- k
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mpc85xx.git
2011-01-20 5:01 Kumar Gala
@ 2011-01-20 8:00 ` Kumar Gala
2011-01-23 17:12 ` Kumar Gala
2011-01-25 20:13 ` Wolfgang Denk
1 sibling, 1 reply; 18+ messages in thread
From: Kumar Gala @ 2011-01-20 8:00 UTC (permalink / raw)
To: u-boot
On Jan 19, 2011, at 11:01 PM, Kumar Gala wrote:
> The following changes since commit e1ccf97c5d7651664d37c0c5aa243874b8851b2d:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2011-01-17 20:31:46 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mpc85xx master
>
Updated to include:
Kumar Gala (1):
powerpc/8xxx: Fix compile warning when build for a DDR1 or DDR2 board
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mpc85xx.git
@ 2011-01-20 5:01 Kumar Gala
2011-01-20 8:00 ` Kumar Gala
2011-01-25 20:13 ` Wolfgang Denk
0 siblings, 2 replies; 18+ messages in thread
From: Kumar Gala @ 2011-01-20 5:01 UTC (permalink / raw)
To: u-boot
The following changes since commit e1ccf97c5d7651664d37c0c5aa243874b8851b2d:
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2011-01-17 20:31:46 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx master
Dipen Dudhat (1):
powerpc/85xx: Protect all LBC code with CONFIG_FSL_LBC
Haiying Wang (1):
8xxx/ddr: add support to only compute the ddr sdram size
Kumar Gala (6):
powerpc/85xx: Move RESET_VECTOR_ADDRESS into config.h
powerpc/p3041: Add various p3041 specific information
powerpc/p5020: Add various p5020 specific information
powerpc/p2040: Add various p2040 specific information
powerpc/8xxx: Add hwconfig APIs to address early parsing used by DDR init
powerpc/8xxx: Introduce 85xx, 86xx, QorIQ config headers
Poonam Aggrwal (2):
powerpc/85xx: Add Support for Freescale P1010 Processor
powerpc/85xx: Add Support for Freescale P1014 Processor
Prabhakar (1):
Fix wrong CONFIG_SYS_MPC85xx_SERDES1_ADDR
Prabhakar Kushwaha (1):
ppc/85xx: Fix compile err when PCI disabled on P1_P2_RDB
York Sun (8):
mpc8xxx: Display RDIMM if detected
mpc8xxx: Enable ECC on/off control in hwconfig
corenet_ds: Enable ECC for corenet_ds
mpc85xx: Adding more registers and options
mpc85xx: Enable unique mode registers and dynamic ODT for DDR3
mpc85xx: Implement workaround for erratum DDR-A003
corenet_ds: Extend board specific parameters
powerpc/p4080: Fix warning in serdes code from early use of hwconfig
arch/powerpc/cpu/mpc85xx/Makefile | 6 +
arch/powerpc/cpu/mpc85xx/cmd_errata.c | 3 +
arch/powerpc/cpu/mpc85xx/cpu.c | 9 +-
arch/powerpc/cpu/mpc85xx/ddr-gen3.c | 99 +++++-
arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 17 +-
arch/powerpc/cpu/mpc85xx/p2040_serdes.c | 66 ++++
arch/powerpc/cpu/mpc85xx/p3041_ids.c | 105 ++++++
arch/powerpc/cpu/mpc85xx/p3041_serdes.c | 151 ++++++++
arch/powerpc/cpu/mpc85xx/p5020_ids.c | 105 ++++++
arch/powerpc/cpu/mpc85xx/p5020_serdes.c | 151 ++++++++
arch/powerpc/cpu/mpc85xx/speed.c | 6 +-
arch/powerpc/cpu/mpc85xx/u-boot.lds | 8 +-
arch/powerpc/cpu/mpc8xxx/cpu.c | 8 +-
arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 262 +++++++++++---
arch/powerpc/cpu/mpc8xxx/ddr/ddr.h | 8 +-
.../cpu/mpc8xxx/ddr/lc_common_dimm_params.c | 20 +-
arch/powerpc/cpu/mpc8xxx/ddr/main.c | 31 ++-
arch/powerpc/cpu/mpc8xxx/ddr/options.c | 395 ++++++++++++++++++--
arch/powerpc/include/asm/config.h | 39 +--
arch/powerpc/include/asm/config_mpc85xx.h | 188 ++++++++++
arch/powerpc/include/asm/config_mpc86xx.h | 38 ++
arch/powerpc/include/asm/fsl_ddr_sdram.h | 52 +++
arch/powerpc/include/asm/immap_85xx.h | 23 +-
arch/powerpc/include/asm/processor.h | 6 +
board/freescale/corenet_ds/config.mk | 27 --
board/freescale/corenet_ds/ddr.c | 159 ++++----
board/freescale/mpc8536ds/config.mk | 14 +-
board/freescale/mpc8572ds/config.mk | 4 +-
board/freescale/p1022ds/config.mk | 10 -
board/freescale/p1_p2_rdb/config.mk | 14 +-
board/freescale/p1_p2_rdb/p1_p2_rdb.c | 4 +-
board/freescale/p1_p2_rdb/tlb.c | 4 +-
board/freescale/p2020ds/config.mk | 26 --
board/tqc/tqm85xx/sdram.c | 8 +-
common/hwconfig.c | 86 +++--
doc/README.fsl-ddr | 74 ++++-
drivers/misc/fsl_law.c | 23 +-
include/configs/MPC8536DS.h | 6 +
include/configs/MPC8572DS.h | 4 +
include/configs/P1022DS.h | 4 +
include/configs/P1_P2_RDB.h | 19 +-
include/configs/P2020DS.h | 4 +
include/configs/P4080DS.h | 16 -
include/configs/corenet_ds.h | 8 +-
include/hwconfig.h | 68 +++-
45 files changed, 1940 insertions(+), 438 deletions(-)
create mode 100644 arch/powerpc/cpu/mpc85xx/p2040_serdes.c
create mode 100644 arch/powerpc/cpu/mpc85xx/p3041_ids.c
create mode 100644 arch/powerpc/cpu/mpc85xx/p3041_serdes.c
create mode 100644 arch/powerpc/cpu/mpc85xx/p5020_ids.c
create mode 100644 arch/powerpc/cpu/mpc85xx/p5020_serdes.c
create mode 100644 arch/powerpc/include/asm/config_mpc85xx.h
create mode 100644 arch/powerpc/include/asm/config_mpc86xx.h
delete mode 100644 board/freescale/corenet_ds/config.mk
delete mode 100644 board/freescale/p1022ds/config.mk
delete mode 100644 board/freescale/p2020ds/config.mk
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2011-06-01 20:01 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-05-19 7:18 [U-Boot] [GIT PULL] Please pull u-boot-mpc85xx.git Kumar Gala
2011-05-19 19:31 ` Wolfgang Denk
2011-05-19 19:48 ` Kumar Gala
-- strict thread matches above, loose matches on Subject: below --
2011-05-26 14:33 Kumar Gala
2011-06-01 20:01 ` Wolfgang Denk
2011-05-18 14:45 Kumar Gala
2011-05-18 21:17 ` Wolfgang Denk
2011-05-19 4:00 ` Kumar Gala
2011-05-19 5:19 ` Wolfgang Denk
2011-05-19 6:49 ` Kumar Gala
2011-02-11 5:46 Kumar Gala
2011-02-11 20:24 ` Wolfgang Denk
2011-01-27 6:49 Kumar Gala
2011-01-31 22:20 ` Wolfgang Denk
2011-01-20 5:01 Kumar Gala
2011-01-20 8:00 ` Kumar Gala
2011-01-23 17:12 ` Kumar Gala
2011-01-25 20:13 ` Wolfgang Denk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.