From mboxrd@z Thu Jan 1 00:00:00 1970 From: BU66ER BAD6ER Subject: Re: Seagate hard disk firmware issue Date: Sat, 30 Apr 2011 13:32:30 +0200 Message-ID: References: <4D3E25AF.1080102@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from mail-gy0-f174.google.com ([209.85.160.174]:63995 "EHLO mail-gy0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754835Ab1D3Lcd convert rfc822-to-8bit (ORCPT ); Sat, 30 Apr 2011 07:32:33 -0400 Received: by gyd10 with SMTP id 10so1532062gyd.19 for ; Sat, 30 Apr 2011 04:32:32 -0700 (PDT) In-Reply-To: Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Hi, Some time ago, I returned my hard disk and got a new one. Lately, I'm having performance issues again and I suspect there is a hardware error again like last time. If you could confirm this I would be most grateful. Thanks in advance! # smartctl -a /dev/sdb smartctl 5.41 2011-03-16 r3296 [x86_64-unknown-linux-gnu-2.6.38-2-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.= net =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Device Model: ST2000DL003-9VT166 Serial Number: 5YD1YD5P =46irmware Version: CC32 User Capacity: 2,000,398,934,016 bytes Device is: Not in smartctl database [for details use: -P showall= ] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Sat Apr 30 12:59:32 2011 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activit= y was completed without error. Auto Offline Data Collection: E= nabled. Self-test execution status: ( 0) The previous self-test routine = completed without error or no self-test h= as ever been run. Total time to complete Offline data collection: ( 623) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate= =2E Auto Offline data collection on/off support. Suspend Offline collection upon= new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before enterin= g power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging support= ed. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30b7) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 096 082 006 Pre-fail Always - 2447656 3 Spin_Up_Time 0x0003 097 092 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 265 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 060 060 030 Pre-fail Always - 1108085 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 717 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 74 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 792 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 065 062 045 Old_age Always - 35 (Min/Max 35/35) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 202 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 265 194 Temperature_Celsius 0x0022 035 040 000 Old_age Always - 35 (0 19 0 0) 195 Hardware_ECC_Recovered 0x001a 015 009 000 Old_age Always - 2447656 197 Current_Pending_Sector 0x0012 096 096 000 Old_age Always - 368 198 Offline_Uncorrectable 0x0010 096 096 000 Old_age Offline - 368 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 9354438771404 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 793142133 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 307847059 SMART Error Log Version: 1 ATA Error Count: 828 (device log contains only the most recent five err= ors) CR =3D Command Register [HEX] FR =3D Features Register [HEX] SC =3D Sector Count Register [HEX] SN =3D Sector Number Register [HEX] CL =3D Cylinder Low Register [HEX] CH =3D Cylinder High Register [HEX] DH =3D Device/Head Register [HEX] DC =3D Device Command Register [HEX] ER =3D Error register [HEX] ST =3D Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=3Ddays, hh=3Dhours, mm=3Dminutes, SS=3Dsec, and sss=3Dmillisec. It "wraps" after 49.710 days. Error 828 occurred at disk power-on lifetime: 705 hours (29 days + 9 ho= urs) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA =3D 0x0fffffff =3D 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ff ff ff ef 00 03:44:18.432 READ DMA EXT 27 00 00 00 00 00 e0 00 03:44:18.431 READ NATIVE MAX ADDRESS EX= T ec 00 00 00 00 00 a0 00 03:44:18.423 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 03:44:18.391 SET FEATURES [Set transfer= mode] 27 00 00 00 00 00 e0 00 03:44:18.391 READ NATIVE MAX ADDRESS EX= T Error 827 occurred at disk power-on lifetime: 705 hours (29 days + 9 ho= urs) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA =3D 0x0fffffff =3D 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ff ff ff ef 00 03:44:15.060 READ DMA EXT 27 00 00 00 00 00 e0 00 03:44:15.059 READ NATIVE MAX ADDRESS EX= T ec 00 00 00 00 00 a0 00 03:44:15.051 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 03:44:15.019 SET FEATURES [Set transfer= mode] 27 00 00 00 00 00 e0 00 03:44:15.019 READ NATIVE MAX ADDRESS EX= T Error 826 occurred at disk power-on lifetime: 705 hours (29 days + 9 ho= urs) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA =3D 0x0fffffff =3D 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ff ff ff ef 00 03:44:11.687 READ DMA EXT 27 00 00 00 00 00 e0 00 03:44:11.686 READ NATIVE MAX ADDRESS EX= T ec 00 00 00 00 00 a0 00 03:44:11.662 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 03:44:11.566 SET FEATURES [Set transfer= mode] 27 00 00 00 00 00 e0 00 03:44:11.566 READ NATIVE MAX ADDRESS EX= T Error 825 occurred at disk power-on lifetime: 705 hours (29 days + 9 ho= urs) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA =3D 0x0fffffff =3D 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ff ff ff ef 00 03:44:08.323 READ DMA EXT 27 00 00 00 00 00 e0 00 03:44:08.322 READ NATIVE MAX ADDRESS EX= T ec 00 00 00 00 00 a0 00 03:44:08.314 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 03:44:08.282 SET FEATURES [Set transfer= mode] 27 00 00 00 00 00 e0 00 03:44:08.282 READ NATIVE MAX ADDRESS EX= T Error 824 occurred at disk power-on lifetime: 705 hours (29 days + 9 ho= urs) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA =3D 0x0fffffff =3D 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ff ff ff ef 00 03:44:04.950 READ DMA EXT 27 00 00 00 00 00 e0 00 03:44:04.949 READ NATIVE MAX ADDRESS EX= T ec 00 00 00 00 00 a0 00 03:44:04.941 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 03:44:04.910 SET FEATURES [Set transfer= mode] 27 00 00 00 00 00 e0 00 03:44:04.909 READ NATIVE MAX ADDRESS EX= T SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute de= lay. On Tue, Jan 25, 2011 at 7:06 AM, BU66ER BAD6ER wro= te: > Dear both, > > Thanks for the input! I will return this hard disk as soon as possibl= e. > > Here below is the latest output. > > Best regards! > > # smartctl -a /dev/sdb > smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local buil= d) > Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforg= e.net > > =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D > Model Family: =A0 =A0 Seagate Barracuda LP > Device Model: =A0 =A0 ST32000542AS > Serial Number: =A0 =A05XW20H7P > Firmware Version: CC34 > User Capacity: =A0 =A02,000,398,934,016 bytes > Device is: =A0 =A0 =A0 =A0In smartctl database [for details use: -P s= how] > ATA Version is: =A0 8 > ATA Standard is: =A0ATA-8-ACS revision 4 > Local Time is: =A0 =A0Tue Jan 25 06:57:27 2011 CET > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: =A0(0x00) Offline data collection act= ivity > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0was never started. > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0Auto Offline Data Collection: Disabled. > Self-test execution status: =A0 =A0 =A0( =A0 0) The previous self-tes= t routine completed > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0without error or no self-test has ever > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0been run. > Total time to complete Offline > data collection: =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 ( 633) seconds. > Offline data collection > capabilities: =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0(0x73) SMART exe= cute Offline immediate. > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0Auto Offline data collection > on/off support. > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0Suspend Offline collection upon new > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0command. > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0No Offline surface scan supported. > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0Self-test supported. > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0Conveyance Self-test supported. > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0Selective Self-test supported. > SMART capabilities: =A0 =A0 =A0 =A0 =A0 =A0(0x0003) Saves SMART data = before entering > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0power-saving mode. > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0Supports SMART auto save timer. > Error logging capability: =A0 =A0 =A0 =A0(0x01) Error logging support= ed. > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0General Purpose Logging supported. > Short self-test routine > recommended polling time: =A0 =A0 =A0 =A0( =A0 1) minutes. > Extended self-test routine > recommended polling time: =A0 =A0 =A0 =A0( 255) minutes. > Conveyance self-test routine > recommended polling time: =A0 =A0 =A0 =A0( =A0 2) minutes. > SCT capabilities: =A0 =A0 =A0 =A0 =A0 =A0 =A0(0x103f) SCT Status supp= orted. > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0SCT Error Recovery Control supported. > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0SCT Feature Control supported. > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0SCT Data Table supported. > > SMART Attributes Data Structure revision number: 10 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME =A0 =A0 =A0 =A0 =A0FLAG =A0 =A0 VALUE WORST THRESH= TYPE > UPDATED =A0WHEN_FAILED RAW_VALUE > =A01 Raw_Read_Error_Rate =A0 =A0 0x000f =A0 096 =A0 085 =A0 006 =A0 =A0= Pre-fail > Always =A0 =A0 =A0 - =A0 =A0 =A0 166323635 > =A03 Spin_Up_Time =A0 =A0 =A0 =A0 =A0 =A00x0003 =A0 100 =A0 100 =A0 0= 00 =A0 =A0Pre-fail > Always =A0 =A0 =A0 - =A0 =A0 =A0 0 > =A04 Start_Stop_Count =A0 =A0 =A0 =A00x0032 =A0 099 =A0 099 =A0 020 =A0= =A0Old_age > Always =A0 =A0 =A0 - =A0 =A0 =A0 1164 > =A05 Reallocated_Sector_Ct =A0 0x0033 =A0 100 =A0 100 =A0 036 =A0 =A0= Pre-fail > Always =A0 =A0 =A0 - =A0 =A0 =A0 0 > =A07 Seek_Error_Rate =A0 =A0 =A0 =A0 0x000f =A0 100 =A0 253 =A0 030 =A0= =A0Pre-fail > Always =A0 =A0 =A0 - =A0 =A0 =A0 499927 > =A09 Power_On_Hours =A0 =A0 =A0 =A0 =A00x0032 =A0 100 =A0 100 =A0 000= =A0 =A0Old_age > Always =A0 =A0 =A0 - =A0 =A0 =A0 334 > =A010 Spin_Retry_Count =A0 =A0 =A0 =A00x0013 =A0 100 =A0 100 =A0 097 = =A0 =A0Pre-fail > Always =A0 =A0 =A0 - =A0 =A0 =A0 0 > =A012 Power_Cycle_Count =A0 =A0 =A0 0x0032 =A0 099 =A0 099 =A0 020 =A0= =A0Old_age > Always =A0 =A0 =A0 - =A0 =A0 =A0 1190 > 183 Runtime_Bad_Block =A0 =A0 =A0 0x0032 =A0 100 =A0 100 =A0 000 =A0 = =A0Old_age > Always =A0 =A0 =A0 - =A0 =A0 =A0 0 > 184 End-to-End_Error =A0 =A0 =A0 =A00x0032 =A0 100 =A0 100 =A0 099 =A0= =A0Old_age > Always =A0 =A0 =A0 - =A0 =A0 =A0 0 > 187 Reported_Uncorrect =A0 =A0 =A00x0032 =A0 001 =A0 001 =A0 000 =A0 = =A0Old_age > Always =A0 =A0 =A0 - =A0 =A0 =A0 495 > 188 Command_Timeout =A0 =A0 =A0 =A0 0x0032 =A0 100 =A0 099 =A0 000 =A0= =A0Old_age > Always =A0 =A0 =A0 - =A0 =A0 =A0 4295032833 > 189 High_Fly_Writes =A0 =A0 =A0 =A0 0x003a =A0 100 =A0 100 =A0 000 =A0= =A0Old_age > Always =A0 =A0 =A0 - =A0 =A0 =A0 0 > 190 Airflow_Temperature_Cel 0x0022 =A0 081 =A0 063 =A0 045 =A0 =A0Old= _age > Always =A0 =A0 =A0 - =A0 =A0 =A0 19 (Lifetime Min/Max 19/19) > 194 Temperature_Celsius =A0 =A0 0x0022 =A0 019 =A0 040 =A0 000 =A0 =A0= Old_age > Always =A0 =A0 =A0 - =A0 =A0 =A0 19 (0 16 0 0) > 195 Hardware_ECC_Recovered =A00x001a =A0 048 =A0 033 =A0 000 =A0 =A0O= ld_age > Always =A0 =A0 =A0 - =A0 =A0 =A0 166323635 > 197 Current_Pending_Sector =A00x0012 =A0 100 =A0 099 =A0 000 =A0 =A0O= ld_age > Always =A0 =A0 =A0 - =A0 =A0 =A0 24 > 198 Offline_Uncorrectable =A0 0x0010 =A0 100 =A0 099 =A0 000 =A0 =A0O= ld_age > Offline =A0 =A0 =A0- =A0 =A0 =A0 24 > 199 UDMA_CRC_Error_Count =A0 =A00x003e =A0 200 =A0 200 =A0 000 =A0 =A0= Old_age > Always =A0 =A0 =A0 - =A0 =A0 =A0 0 > 240 Head_Flying_Hours =A0 =A0 =A0 0x0000 =A0 100 =A0 253 =A0 000 =A0 = =A0Old_age > Offline =A0 =A0 =A0- =A0 =A0 =A0 65979287602589 > 241 Total_LBAs_Written =A0 =A0 =A00x0000 =A0 100 =A0 253 =A0 000 =A0 = =A0Old_age > Offline =A0 =A0 =A0- =A0 =A0 =A0 1931349171 > 242 Total_LBAs_Read =A0 =A0 =A0 =A0 0x0000 =A0 100 =A0 253 =A0 000 =A0= =A0Old_age > Offline =A0 =A0 =A0- =A0 =A0 =A0 2326768434 > > SMART Error Log Version: 1 > ATA Error Count: 573 (device log contains only the most recent five e= rrors) > =A0 =A0 =A0 =A0CR =3D Command Register [HEX] > =A0 =A0 =A0 =A0FR =3D Features Register [HEX] > =A0 =A0 =A0 =A0SC =3D Sector Count Register [HEX] > =A0 =A0 =A0 =A0SN =3D Sector Number Register [HEX] > =A0 =A0 =A0 =A0CL =3D Cylinder Low Register [HEX] > =A0 =A0 =A0 =A0CH =3D Cylinder High Register [HEX] > =A0 =A0 =A0 =A0DH =3D Device/Head Register [HEX] > =A0 =A0 =A0 =A0DC =3D Device Command Register [HEX] > =A0 =A0 =A0 =A0ER =3D Error register [HEX] > =A0 =A0 =A0 =A0ST =3D Status register [HEX] > Powered_Up_Time is measured from power on, and printed as > DDd+hh:mm:SS.sss where DD=3Ddays, hh=3Dhours, mm=3Dminutes, > SS=3Dsec, and sss=3Dmillisec. It "wraps" after 49.710 days. > > Error 573 occurred at disk power-on lifetime: 317 hours (13 days + 5 = hours) > =A0When the command that caused the error occurred, the device was > active or idle. > > =A0After command completion occurred, registers were: > =A0ER ST SC SN CL CH DH > =A0-- -- -- -- -- -- -- > =A040 51 00 83 74 1b 07 =A0Error: UNC at LBA =3D 0x071b7483 =3D 11923= 9811 > > =A0Commands leading to the command that caused the error were: > =A0CR FR SC SN CL CH DH DC =A0 Powered_Up_Time =A0Command/Feature_Nam= e > =A0-- -- -- -- -- -- -- -- =A0---------------- =A0-------------------= - > =A0c8 00 08 7f 74 1b e7 00 =A0 =A0 =A013:20:31.001 =A0READ DMA > =A027 00 00 00 00 00 e0 00 =A0 =A0 =A013:20:31.000 =A0READ NATIVE MAX= ADDRESS EXT > =A0ec 00 00 00 00 00 a0 00 =A0 =A0 =A013:20:30.992 =A0IDENTIFY DEVICE > =A0ef 03 46 00 00 00 a0 00 =A0 =A0 =A013:20:30.986 =A0SET FEATURES [S= et transfer mode] > =A027 00 00 00 00 00 e0 00 =A0 =A0 =A013:20:30.964 =A0READ NATIVE MAX= ADDRESS EXT > > Error 572 occurred at disk power-on lifetime: 317 hours (13 days + 5 = hours) > =A0When the command that caused the error occurred, the device was > active or idle. > > =A0After command completion occurred, registers were: > =A0ER ST SC SN CL CH DH > =A0-- -- -- -- -- -- -- > =A040 51 00 83 74 1b 07 =A0Error: UNC at LBA =3D 0x071b7483 =3D 11923= 9811 > > =A0Commands leading to the command that caused the error were: > =A0CR FR SC SN CL CH DH DC =A0 Powered_Up_Time =A0Command/Feature_Nam= e > =A0-- -- -- -- -- -- -- -- =A0---------------- =A0-------------------= - > =A0c8 00 08 7f 74 1b e7 00 =A0 =A0 =A013:20:27.236 =A0READ DMA > =A027 00 00 00 00 00 e0 00 =A0 =A0 =A013:20:27.235 =A0READ NATIVE MAX= ADDRESS EXT > =A0ec 00 00 00 00 00 a0 00 =A0 =A0 =A013:20:27.227 =A0IDENTIFY DEVICE > =A0ef 03 46 00 00 00 a0 00 =A0 =A0 =A013:20:27.223 =A0SET FEATURES [S= et transfer mode] > =A027 00 00 00 00 00 e0 00 =A0 =A0 =A013:20:27.199 =A0READ NATIVE MAX= ADDRESS EXT > > Error 571 occurred at disk power-on lifetime: 317 hours (13 days + 5 = hours) > =A0When the command that caused the error occurred, the device was > active or idle. > > =A0After command completion occurred, registers were: > =A0ER ST SC SN CL CH DH > =A0-- -- -- -- -- -- -- > =A040 51 00 83 74 1b 07 =A0Error: UNC at LBA =3D 0x071b7483 =3D 11923= 9811 > > =A0Commands leading to the command that caused the error were: > =A0CR FR SC SN CL CH DH DC =A0 Powered_Up_Time =A0Command/Feature_Nam= e > =A0-- -- -- -- -- -- -- -- =A0---------------- =A0-------------------= - > =A0c8 00 08 7f 74 1b e7 00 =A0 =A0 =A013:20:23.451 =A0READ DMA > =A027 00 00 00 00 00 e0 00 =A0 =A0 =A013:20:23.451 =A0READ NATIVE MAX= ADDRESS EXT > =A0ec 00 00 00 00 00 a0 00 =A0 =A0 =A013:20:23.442 =A0IDENTIFY DEVICE > =A0ef 03 46 00 00 00 a0 00 =A0 =A0 =A013:20:23.438 =A0SET FEATURES [S= et transfer mode] > =A027 00 00 00 00 00 e0 00 =A0 =A0 =A013:20:23.407 =A0READ NATIVE MAX= ADDRESS EXT > > Error 570 occurred at disk power-on lifetime: 317 hours (13 days + 5 = hours) > =A0When the command that caused the error occurred, the device was > active or idle. > > =A0After command completion occurred, registers were: > =A0ER ST SC SN CL CH DH > =A0-- -- -- -- -- -- -- > =A040 51 00 83 74 1b 07 =A0Error: UNC at LBA =3D 0x071b7483 =3D 11923= 9811 > > =A0Commands leading to the command that caused the error were: > =A0CR FR SC SN CL CH DH DC =A0 Powered_Up_Time =A0Command/Feature_Nam= e > =A0-- -- -- -- -- -- -- -- =A0---------------- =A0-------------------= - > =A0c8 00 08 7f 74 1b e7 00 =A0 =A0 =A013:20:19.659 =A0READ DMA > =A027 00 00 00 00 00 e0 00 =A0 =A0 =A013:20:19.658 =A0READ NATIVE MAX= ADDRESS EXT > =A0ec 00 00 00 00 00 a0 00 =A0 =A0 =A013:20:19.650 =A0IDENTIFY DEVICE > =A0ef 03 46 00 00 00 a0 00 =A0 =A0 =A013:20:19.619 =A0SET FEATURES [S= et transfer mode] > =A027 00 00 00 00 00 e0 00 =A0 =A0 =A013:20:19.534 =A0READ NATIVE MAX= ADDRESS EXT > > Error 569 occurred at disk power-on lifetime: 317 hours (13 days + 5 = hours) > =A0When the command that caused the error occurred, the device was > active or idle. > > =A0After command completion occurred, registers were: > =A0ER ST SC SN CL CH DH > =A0-- -- -- -- -- -- -- > =A040 51 00 83 74 1b 07 =A0Error: UNC at LBA =3D 0x071b7483 =3D 11923= 9811 > > =A0Commands leading to the command that caused the error were: > =A0CR FR SC SN CL CH DH DC =A0 Powered_Up_Time =A0Command/Feature_Nam= e > =A0-- -- -- -- -- -- -- -- =A0---------------- =A0-------------------= - > =A0c8 00 08 7f 74 1b e7 00 =A0 =A0 =A013:20:15.894 =A0READ DMA > =A027 00 00 00 00 00 e0 00 =A0 =A0 =A013:20:15.893 =A0READ NATIVE MAX= ADDRESS EXT > =A0ec 00 00 00 00 00 a0 00 =A0 =A0 =A013:20:15.885 =A0IDENTIFY DEVICE > =A0ef 03 46 00 00 00 a0 00 =A0 =A0 =A013:20:15.880 =A0SET FEATURES [S= et transfer mode] > =A027 00 00 00 00 00 e0 00 =A0 =A0 =A013:20:15.857 =A0READ NATIVE MAX= ADDRESS EXT > > SMART Self-test log structure revision number 1 > No self-tests have been logged. =A0[To run self-tests, use: smartctl = -t] > > > SMART Selective self-test log data structure revision number 1 > =A0SPAN =A0MIN_LBA =A0MAX_LBA =A0CURRENT_TEST_STATUS > =A0 =A01 =A0 =A0 =A0 =A00 =A0 =A0 =A0 =A00 =A0Not_testing > =A0 =A02 =A0 =A0 =A0 =A00 =A0 =A0 =A0 =A00 =A0Not_testing > =A0 =A03 =A0 =A0 =A0 =A00 =A0 =A0 =A0 =A00 =A0Not_testing > =A0 =A04 =A0 =A0 =A0 =A00 =A0 =A0 =A0 =A00 =A0Not_testing > =A0 =A05 =A0 =A0 =A0 =A00 =A0 =A0 =A0 =A00 =A0Not_testing > Selective self-test flags (0x0): > =A0After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute = delay. > > On Tue, Jan 25, 2011 at 2:21 AM, Robert Hancock wrote: >> On 01/23/2011 05:05 AM, BU66ER BAD6ER wrote: >>> >>> Hi, >>> >>> Four weeks ago I bought a new 2TB Seagate Barracuda internal SATA >>> drive. That drive has two 667GB ext4 partions (667GB unused) and it= is >>> used for storage. My main system (Debian Sid 64-bit and KDE) reside= s >>> on a 40GB SSD, also using ext4. >>> >>> Two weeks ago I noticed a severe performance drop, where any file >>> manager couldn't view directories on the 2TB disk without a one or = two >>> minute penalty. After that I have had three hard freezes of that di= sk >>> and the entire system. Before the freeze there is very much hd >>> activity and finally I need to turn the power off. I have now also >>> made a backup of /dev/sdb1 should it be fatally serious. >>> >>> I was recommended by someone at the #debian irc to make changes to = the >>> spindown_time but that only helped for a few days. Yesterday, the 3= rd >>> freeze came and the system wouldn't even recognize the disk after >>> reboot; just 'clicking' waiting for a response. I showed the kern.l= og >>> to someone at the same channel who concluded that this should be a >>> firmware issue. >>> >>> Here is the latest kern.log which may identify the issue: I hope it >>> contains the relevant details. But first the output of smartctl -a >>> /dev/sdb. >>> >>> I have now set the hdparm spindown_time to 0, disabling disk sleep >>> which seems to have been the culprit as judged on messages in the >>> Dolphin file manager etc. >>> >>> Thanks for any help! >>> >>> >>>> # smartctl -a /dev/sdb >>>> smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local b= uild) >>>> Copyright (C) 2002-10 by Bruce Allen, >>>> http://smartmontools.sourceforge.net >>>> >>>> =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D >>>> Model Family: =A0 =A0 Seagate Barracuda LP >>>> Device Model: =A0 =A0 ST32000542AS >>>> Serial Number: =A0 =A05XW20H7P >>>> Firmware Version: CC34 >>>> User Capacity: =A0 =A02,000,398,934,016 bytes >>>> Device is: =A0 =A0 =A0 =A0In smartctl database [for details use: -= P show] >>>> ATA Version is: =A0 8 >>>> ATA Standard is: =A0ATA-8-ACS revision 4 >>>> Local Time is: =A0 =A0Sun Jan 23 11:50:56 2011 CET >>>> SMART support is: Available - device has SMART capability. >>>> SMART support is: Enabled >>>> >>>> =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D >>>> SMART overall-health self-assessment test result: PASSED >>>> >>>> General SMART Values: >>>> Offline data collection status: =A0(0x00) Offline data collection = activity >>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0 =A0 was never started. >>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0 =A0 Auto Offline Data Collection: >>>> Disabled. >>>> Self-test execution status: =A0 =A0 =A0( =A0 0) The previous self-= test routine >>>> completed >>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0 =A0 without error or no self-test has >>>> ever >>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0 =A0 been run. >>>> Total time to complete Offline >>>> data collection: =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 ( 633) seconds. >>>> Offline data collection >>>> capabilities: =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0(0x73) SMART = execute Offline immediate. >>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0 =A0 Auto Offline data collection >>>> on/off support. >>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0 =A0 Suspend Offline collection upon >>>> new >>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0 =A0 command. >>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0 =A0 No Offline surface scan >>>> supported. >>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0 =A0 Self-test supported. >>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0 =A0 Conveyance Self-test supported. >>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0 =A0 Selective Self-test supported. >>>> SMART capabilities: =A0 =A0 =A0 =A0 =A0 =A0(0x0003) Saves SMART da= ta before entering >>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0 =A0 power-saving mode. >>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0 =A0 Supports SMART auto save timer. >>>> Error logging capability: =A0 =A0 =A0 =A0(0x01) Error logging supp= orted. >>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0 =A0 General Purpose Logging >>>> supported. >>>> Short self-test routine >>>> recommended polling time: =A0 =A0 =A0 =A0( =A0 1) minutes. >>>> Extended self-test routine >>>> recommended polling time: =A0 =A0 =A0 =A0( 255) minutes. >>>> Conveyance self-test routine >>>> recommended polling time: =A0 =A0 =A0 =A0( =A0 2) minutes. >>>> SCT capabilities: =A0 =A0 =A0 =A0 =A0 =A0 =A0(0x103f) SCT Status s= upported. >>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0 =A0 SCT Error Recovery Control >>>> supported. >>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0 =A0 SCT Feature Control supported. >>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0 =A0 SCT Data Table supported. >>>> >>>> SMART Attributes Data Structure revision number: 10 >>>> Vendor Specific SMART Attributes with Thresholds: >>>> ID# ATTRIBUTE_NAME =A0 =A0 =A0 =A0 =A0FLAG =A0 =A0 VALUE WORST THR= ESH TYPE =A0 =A0 =A0UPDATED >>>> =A0WHEN_FAILED RAW_VALUE >>>> =A0 1 Raw_Read_Error_Rate =A0 =A0 0x000f =A0 100 =A0 089 =A0 006 =A0= =A0Pre-fail =A0Always >>>> =A0 =A0 =A0 - =A0 =A0 =A0 184733939 >>>> =A0 3 Spin_Up_Time =A0 =A0 =A0 =A0 =A0 =A00x0003 =A0 100 =A0 100 =A0= 000 =A0 =A0Pre-fail =A0Always >>>> =A0 =A0 =A0 - =A0 =A0 =A0 0 >>>> =A0 4 Start_Stop_Count =A0 =A0 =A0 =A00x0032 =A0 099 =A0 099 =A0 0= 20 =A0 =A0Old_age =A0 Always >>>> =A0 =A0 =A0 - =A0 =A0 =A0 1160 >>>> =A0 5 Reallocated_Sector_Ct =A0 0x0033 =A0 100 =A0 100 =A0 036 =A0= =A0Pre-fail =A0Always >>>> =A0 =A0 =A0 - =A0 =A0 =A0 0 >>>> =A0 7 Seek_Error_Rate =A0 =A0 =A0 =A0 0x000f =A0 100 =A0 253 =A0 0= 30 =A0 =A0Pre-fail =A0Always >>>> =A0 =A0 =A0 - =A0 =A0 =A0 296094 >>>> =A0 9 Power_On_Hours =A0 =A0 =A0 =A0 =A00x0032 =A0 100 =A0 100 =A0= 000 =A0 =A0Old_age =A0 Always >>>> =A0 =A0 =A0 - =A0 =A0 =A0 307 >>>> =A010 Spin_Retry_Count =A0 =A0 =A0 =A00x0013 =A0 100 =A0 100 =A0 0= 97 =A0 =A0Pre-fail =A0Always >>>> =A0 =A0 =A0 - =A0 =A0 =A0 0 >>>> =A012 Power_Cycle_Count =A0 =A0 =A0 0x0032 =A0 099 =A0 099 =A0 020= =A0 =A0Old_age =A0 Always >>>> =A0 =A0 =A0 - =A0 =A0 =A0 1186 >>>> 183 Runtime_Bad_Block =A0 =A0 =A0 0x0032 =A0 100 =A0 100 =A0 000 =A0= =A0Old_age =A0 Always >>>> =A0 =A0 =A0 - =A0 =A0 =A0 0 >>>> 184 End-to-End_Error =A0 =A0 =A0 =A00x0032 =A0 100 =A0 100 =A0 099= =A0 =A0Old_age =A0 Always >>>> =A0 =A0 =A0 - =A0 =A0 =A0 0 >>>> 187 Reported_Uncorrect =A0 =A0 =A00x0032 =A0 001 =A0 001 =A0 000 =A0= =A0Old_age =A0 Always >>>> =A0 =A0 =A0 - =A0 =A0 =A0 225 >>>> 188 Command_Timeout =A0 =A0 =A0 =A0 0x0032 =A0 100 =A0 099 =A0 000= =A0 =A0Old_age =A0 Always >>>> =A0 =A0 =A0 - =A0 =A0 =A0 4295032833 >>>> 189 High_Fly_Writes =A0 =A0 =A0 =A0 0x003a =A0 100 =A0 100 =A0 000= =A0 =A0Old_age =A0 Always >>>> =A0 =A0 =A0 - =A0 =A0 =A0 0 >>>> 190 Airflow_Temperature_Cel 0x0022 =A0 063 =A0 063 =A0 045 =A0 =A0= Old_age =A0 Always >>>> =A0 =A0 =A0 - =A0 =A0 =A0 37 (Lifetime Min/Max 19/37) >>>> 194 Temperature_Celsius =A0 =A0 0x0022 =A0 037 =A0 040 =A0 000 =A0= =A0Old_age =A0 Always >>>> =A0 =A0 =A0 - =A0 =A0 =A0 37 (0 16 0 0) >>>> 195 Hardware_ECC_Recovered =A00x001a =A0 052 =A0 033 =A0 000 =A0 =A0= Old_age =A0 Always >>>> =A0 =A0 =A0 - =A0 =A0 =A0 184733939 >>>> 197 Current_Pending_Sector =A00x0012 =A0 100 =A0 099 =A0 000 =A0 =A0= Old_age =A0 Always >>>> =A0 =A0 =A0 - =A0 =A0 =A0 40 >>>> 198 Offline_Uncorrectable =A0 0x0010 =A0 100 =A0 099 =A0 000 =A0 =A0= Old_age =A0 Offline >>>> =A0 =A0 =A0- =A0 =A0 =A0 40 >>>> 199 UDMA_CRC_Error_Count =A0 =A00x003e =A0 200 =A0 200 =A0 000 =A0= =A0Old_age =A0 Always >>>> =A0 =A0 =A0 - =A0 =A0 =A0 0 >>>> 240 Head_Flying_Hours =A0 =A0 =A0 0x0000 =A0 100 =A0 253 =A0 000 =A0= =A0Old_age =A0 Offline >>>> =A0 =A0 =A0- =A0 =A0 =A0 210019605808507 >>>> 241 Total_LBAs_Written =A0 =A0 =A00x0000 =A0 100 =A0 253 =A0 000 =A0= =A0Old_age =A0 Offline >>>> =A0 =A0 =A0- =A0 =A0 =A0 546635184 >>>> 242 Total_LBAs_Read =A0 =A0 =A0 =A0 0x0000 =A0 100 =A0 253 =A0 000= =A0 =A0Old_age =A0 Offline >>>> =A0 =A0 =A0- =A0 =A0 =A0 2195715347 >> >> The SMART data shows there haven't been many start/stops other than = from >> power cycles, so I don't think spindown is related here. The error l= og >> entries and the Offline_Uncorrectable and Reported_Uncorrect attribu= tes >> would indicate that your drive is having read errors. Think you like= ly need >> a new drive. >> >