Re: Linux 2.6.39-rc3

[Jerome Glisse <j.glisse@gmail.com>]

On Mon, Apr 18, 2011 at 11:33 AM, Alex Deucher <alexdeucher@gmail.com> wrote:
> On Mon, Apr 18, 2011 at 11:29 AM, Jerome Glisse <j.glisse@gmail.com> wrote:
>> On Mon, Apr 18, 2011 at 11:23 AM, Alex Deucher <alexdeucher@gmail.com> wrote:
>>> On Sun, Apr 17, 2011 at 10:09 AM, Joerg Roedel <joro@8bytes.org> wrote:
>>>> On Sat, Apr 16, 2011 at 02:54:04PM -0400, Jerome Glisse wrote:
>>>>
>>>>> If you want to go the printk way you can add printk before each test
>>>>> ring_test, ib_test in r600.c this 2 functions are the own that might
>>>>> trigger the first GPU gart activities.
>>>>
>>>> Okay, I found the place in source that triggers this. It happens in the
>>>> function r600_ib_test. The interesting thing is that not the ib-command
>>>> itself is responsible but the fence that is emitted afterwards (proved
>>>> by removing the fence command, where the problem went away).
>>>> I don't know enough about the command semantics to make a guess what
>>>> goes wrong there. But maybe you GPU folks have an idea?
>>>>
>>>
>>> I can't think of anything off hand.  It might be worth disabling the
>>> call to r600_ib_test() in r600_init() and then seeing if you get any
>>> errors when the fences are used later on when X starts or just at that
>>> point in the module load sequence.  What's odd is that when you tested
>>> radeon.no_wb=1 you got the same behavior as that disables shadowing of
>>> fence writes to gpu gart mem, so it wouldn't be writing to memory in
>>> that case.
>>>
>>> Alex
>>>
>>
>> It might be the irq ring write that is faulty.
>
> That's disabled with no_wb=1 as well.
>
> Alex
>

I mean the irq interrupt ring, i don't see this being disabled when no_wb=1

Cheers,
Jerome