Hi, Stefan,
 
Thanks for your help.
 
My platform uses the MICRON MT47H256M8THN DDRII SDRAM and the DDRII SDRAM is soldered on the board.

As I said, my board was similar with "Kilauea" evb, so I created my configuration header file from Kilauea's at U-Boot. In the configuration file, register value for the DDR SDRAM controller is defined. But I have removed DDR autocalibraton related configuration from the configuration file, do you think this will cause any issues?
 
I'm not sure what you mean about "intensive memory test". I use "mm" cmd under U-Boot command prompt to modify value of high 512M memory, and this command works well.
 
About booting Linux, the kernel hangs at the same location. Always after this print info "<4>Mount-cache hash table entries: 512".

Best Regards,
Sun
 
> From: sr@denx.de
> To: linuxppc-dev@ozlabs.org
> Subject: Re: Help!Some memory doesn't work on PPC405Ex based board!
> Date: Tue, 14 Apr 2009 11:23:02 +0200
> CC: sunwx2001@hotmail.com
>
> On Monday 13 April 2009, SunNeo wrote:
> > I'm porting Linux-2.6.29 on PPC405Ex based board, it's very similar to AMCC
> > "Kilauea" evb.
> >
> > In my board, two 512MB DDRII memory is connected to 2 ranks of the 405Ex
> > CPU. This 1GB memory works well at U-Boot-2009.01, but when I boot
> > Linux-2.6.29, the kernel hangs somewhere.
>
> Does it just hang "somewhere", or always at the same location? A random hangup
> could mean that you are having a memory problem (hardware, or wrong
> initialization).
>
> > What interesting is, if I
> > configured the system to use only 512MB memory at U-Boot, the Linux can
> > boot normally.
>
> Are you using DIMM's on your platform? Or soldered chips? Which memory
> initialization code are you using in U-Boot? And which autocalibration code?
>
> Did you do some intensive memory test?
>
> Best regards,
> Stefan

---

把MSN装进手机，更多聊天乐趣等你挖掘！ 立刻下载！