From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bakhvalov, Denis (Nokia - PL/Wroclaw) Date: Fri, 12 Feb 2016 13:15:08 +0000 Subject: [U-Boot] Problem with mounting a jffs2 partition on flash. In-Reply-To: <56BDC959.7080808@denx.de> References: <201602081712.21810.marex@denx.de> <201602091830.32950.marex@denx.de> <56BB625E.1040207@denx.de> <56BC76E4.6040209@denx.de> <56BC8457.5010702@denx.de> <56BCA12F.1010308@denx.de> <56BCACA2.1080109@denx.de> <56BDC959.7080808@denx.de> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > > I tried mainline U-boot with your patches as well as socfpga branch. > > Still no success. > > Did you try the image I sent you ? That one is tested to work on AV SoCDK. I tried it also. The same result. > > There is no output on the console. > > Once again when I'm uploading old version of U-boot and preloader (from 2013) at least I can see the output on the console. > > > > What could be the next step? > > Press the "WARM RESET" button of the HPS (located top-right, if you have > the board oriented with HPS ethernet on the top-left). Do you > see any console output then ? You do use the top-right miniUSB port > for console, right ? Currently board is integrated in RF unit. I will put off the cover and press it. Best regards, Denis Bakhvalov