From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bakhvalov, Denis (Nokia - PL/Wroclaw) Date: Fri, 12 Feb 2016 14:00:47 +0000 Subject: [U-Boot] Problem with mounting a jffs2 partition on flash. References: <201602081712.21810.marex@denx.de> <201602091830.32950.marex@denx.de> <56BB625E.1040207@denx.de> <56BC76E4.6040209@denx.de> <56BC8457.5010702@denx.de> <56BCA12F.1010308@denx.de> <56BCACA2.1080109@denx.de> <56BDC959.7080808@denx.de> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Marek, > > Press the "WARM RESET" button of the HPS (located top-right, if you have > > the board oriented with HPS ethernet on the top-left). Do you > > see any console output then ? You do use the top-right miniUSB port > > for console, right ? > > Currently board is integrated in RF unit. I will put off the cover and press it. I took off the cover and: 1. We don't have socfpga dev kit. There is only fpga itself. Sorry for that, but I haven't ever opened the unit before. I assume that the main board is produced by Nokia. 2. Maybe this is the problem, that we are targeting socfpga Dev Kit? 3. I can send you some photos to check. Best regards, Denis Bakhvalov