> Subject: RE: PV resume failed after self migration failed
> Date: Wed, 22 Jun 2011 14:06:18 +1000
> From: james.harper@bendigoit.com.au
> To: tinnycloud@hotmail.com; xen-devel@lists.xensource.com
> 
> > >
> > > The xenvbd driver doesn't do any timeout, windows does the timeout
> and
> > > tells xenvbd to reset. I haven't tested the scenario you describe
> very
> > > recently, and xenvbd is now two different drivers, one for scsiport
> (<=
> > > 2003) and one for storport (>= Vista), so there could be bugs in
> either.
> > >
> > 
> > The bug can be reproduced in 2003 32bit system. We are using scsi
> driver.
> > I put some log in XenVbd_HwScsiResetBus to see if there are not
> completed
> > srb(Like below)
> > but I didn't see the log when XenVbd_HwScsiResetBus called. So No IO
> is in
> > queue.
> 
> Just to confirm, is this the issue that only happens when the migration
> fails in xen and is cancelled?
> 
Exactly.
I've noticed some difference in log.
 
In normal resuming, from the log, we can see event port assign like below:
pdo_event_channel = 5 (Notifying event channel 5)
suspend event channel = 6
XEN_INIT_TYPE_EVENT_CHANNEL - event-channel = 7  (for VBD)
XEN_INIT_TYPE_EVENT_CHANNEL - event-channel = 8  (VIF)
 
when guest resuming locally from suspend(that is migration failed in xen, guest
has already suspended, so it need resuming)
 
pdo_event_channel = 7 ( Notifying event channel 7)

suspend event channel = 8
XEN_INIT_TYPE_EVENT_CHANNEL - event-channel = 9 (vif)
 
VBD port is not allocated, since pdo is waiting fdo change.
 
It looks like port 5 and 6 is still occpuied, or pdo_event_channel bind twice?

> James
>