From mboxrd@z Thu Jan 1 00:00:00 1970 From: Yuvaraj Ranganathan Date: Thu, 29 Jul 2021 09:37:16 +0000 Subject: [Intel-wired-lan] [E1000-devel] Traffic not passing for VLAN ID >= 32 on the I350 SR-IOV enabled NIC In-Reply-To: References: , Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: intel-wired-lan@osuosl.org List-ID: Hi Laurent, Thanks for your help. Below is the information of SR-IOV interface, where VF 2 is directly mapped to VM interface. root at local-node:~# ip link show heth-0-1 5: heth-0-1: mtu 9192 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 58:00:bb:aa:ee:49 brd ff:ff:ff:ff:ff:ff vf 0 MAC aa:81:c7:6f:b4:0a, spoof checking on, link-state auto, trust on vf 1 MAC 16:26:97:40:0f:86, spoof checking on, link-state auto, trust on vf 2 MAC 58:00:bb:aa:ee:60, spoof checking on, link-state auto, trust on vf 3 MAC 22:28:fa:f4:68:1a, spoof checking on, link-state auto, trust on root at local-node:~# On configuring the VLAN >=32 on the VM interface and tried sending outgoing traffic, there is no packet captured in tcpdump at SR-IOV(heth-0-1) interface. In case of VLAN <= 31, the outgoing packet captured in tcpdump at heth-0-1 interface. You help is always appreciated! Thanks, Yuvaraj. From: Laurent Dumont Date: Thursday, 29 July 2021 at 7:41 AM To: Yuvaraj Ranganathan Cc: e1000-devel at lists.sourceforge.net , intel-wired-lan at lists.osuosl.org , Pushp Saurav Subject: Re: [E1000-devel] Traffic not passing for VLAN ID >= 32 on the I350 SR-IOV enabled NIC [External Email. Be cautious of content] Can you show the output of ip link show $SRIOV_INT_NAME_HERE Are you seeing any traffic reaching inside the VM if you tcpdump there? On Tue, Jul 27, 2021 at 10:07 AM Yuvaraj Ranganathan via E1000-devel > wrote: Hi Team, With the SR-IOV enabled on I350 NIC which has 4 VF?s, on configuring VLAN ID from range 1 to 31 on the VM interface, network traffic is fine and no issues. When trying to create an interface with VLAN ID >= 32 on the VM, traffic is not passing to that interface and as per HW specs, VLAN ID?s from 1 to 4096 are supported. VM?s interface is directly mapped to one of the VF on I350 NIC. I am using IGB PF driver version 5.7.2(latest). Could somebody please help! Thanks in advance, Yuvaraj. Juniper Business Use Only _______________________________________________ E1000-devel mailing list E1000-devel at lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel Ethernet, visit https://forums.intel.com/s/topic/0TO0P00000018NbWAI/intel-ethernet Juniper Business Use Only -------------- next part -------------- An HTML attachment was scrubbed... URL: