Re: [RFC PATCH v2] bcache: export zoned information for backing device

[Damien Le Moal <Damien.LeMoal@wdc.com>]

On 2020/05/11 1:52, Coly Li wrote:
> This is a very basic zoned device support. With this patch, bcache
> device is able to,
> - Export zoned device attribution via sysfs
> - Response report zones request, e.g. by command 'blkzone report'
> But the bcache device is still NOT able to,
> - Response any zoned device management request or IOCTL command
> 
> Here are the testings I have done,
> - read /sys/block/bcache0/queue/zoned, content is 'host-managed'
> - read /sys/block/bcache0/queue/nr_zones, content is number of zones
>   including all zone types.
> - read /sys/block/bcache0/queue/chunk_sectors, content is zone size
>   in sectors.
> - run 'blkzone report /dev/bcache0', all zones information displayed.
> - run 'blkzone reset /dev/bcache0', operation is rejected with error
>   information: "blkzone: /dev/bcache0: BLKRESETZONE ioctl failed:
>   Operation not supported"

Weird. If report zones works, reset should also, modulo the zone size problem
for the first zone. You may get EINVAL, but not ENOTTY.

> - Sequential writes by dd, I can see some zones' write pointer 'wptr'
>   values updated.
> 
> All of these are very basic testings, if you have better testing
> tools or cases, please offer me hint.
> 
> Thanks in advance for your review and comments.
> 
> Signed-off-by: Coly Li <colyli@suse.de>
> CC: Hannes Reinecke <hare@suse.com>
> CC: Damien Le Moal <damien.lemoal@wdc.com>
> CC: Johannes Thumshirn <johannes.thumshirn@wdc.com>
> ---
>  drivers/md/bcache/bcache.h  | 10 +++++
>  drivers/md/bcache/request.c | 74 +++++++++++++++++++++++++++++++++++++
>  drivers/md/bcache/super.c   | 51 +++++++++++++++++++++----
>  3 files changed, 128 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/md/bcache/bcache.h b/drivers/md/bcache/bcache.h
> index 74a9849ea164..0d298b48707f 100644
> --- a/drivers/md/bcache/bcache.h
> +++ b/drivers/md/bcache/bcache.h
> @@ -221,6 +221,7 @@ BITMASK(GC_MOVE, struct bucket, gc_mark, 15, 1);
>  struct search;
>  struct btree;
>  struct keybuf;
> +struct bch_report_zones_args;
>  
>  struct keybuf_key {
>  	struct rb_node		node;
> @@ -277,6 +278,8 @@ struct bcache_device {
>  			  struct bio *bio, unsigned int sectors);
>  	int (*ioctl)(struct bcache_device *d, fmode_t mode,
>  		     unsigned int cmd, unsigned long arg);
> +	int (*report_zones)(struct bch_report_zones_args *args,
> +			    unsigned int nr_zones);
>  };
>  
>  struct io {
> @@ -748,6 +751,13 @@ struct bbio {
>  	struct bio		bio;
>  };
>  
> +struct bch_report_zones_args {
> +	struct bcache_device *bcache_device;
> +	sector_t sector;
> +	void *orig_data;
> +	report_zones_cb orig_cb;
> +};
> +
>  #define BTREE_PRIO		USHRT_MAX
>  #define INITIAL_PRIO		32768U
>  
> diff --git a/drivers/md/bcache/request.c b/drivers/md/bcache/request.c
> index 71a90fbec314..bd50204caac7 100644
> --- a/drivers/md/bcache/request.c
> +++ b/drivers/md/bcache/request.c
> @@ -1190,6 +1190,19 @@ blk_qc_t cached_dev_make_request(struct request_queue *q, struct bio *bio)
>  		}
>  	}
>  
> +	/*
> +	 * zone management request may change the data layout and content
> +	 * implicitly on backing device, which introduces unacceptible

s/unacceptible/unacceptable

> +	 * inconsistency between the backing device and the cache device.
> +	 * Therefore all zone management related request will be denied here.
> +	 */
> +	if (op_is_zone_mgmt(bio->bi_opf)) {
> +		pr_err_ratelimited("zoned device management request denied.");
> +		bio->bi_status = BLK_STS_NOTSUPP;
> +		bio_endio(bio);
> +		return BLK_QC_T_NONE;

OK. That explains the operation not supported for "blkzone reset". I do not
think this is good. With this, the drive will be writable only exactly once,
without the possibility for the user to reset any zone and rewrite them. All
zone compliant file systems will fail (f2fs, zonefs, btrfs coming).

At the very least REQ_OP_ZONE_RESET should be allowed and trigger an
invalidation on the cache device of all blocks of the zone that are cached.

Note: the zone management operations will need to be remapped like report zones,
but in reverse: the BIO start sector must be increase by the zone size.

> +	}
> +
>  	generic_start_io_acct(q,
>  			      bio_op(bio),
>  			      bio_sectors(bio),
> @@ -1233,6 +1246,24 @@ static int cached_dev_ioctl(struct bcache_device *d, fmode_t mode,
>  	if (dc->io_disable)
>  		return -EIO;
>  
> +	/*
> +	 * zone management ioctl commands may change the data layout
> +	 * and content implicitly on backing device, which introduces
> +	 * unacceptible inconsistency between the backing device and
> +	 * the cache device. Therefore all zone management related
> +	 * ioctl commands will be denied here.
> +	 */
> +	switch (cmd) {
> +	case BLKRESETZONE:
> +	case BLKOPENZONE:
> +	case BLKCLOSEZONE:
> +	case BLKFINISHZONE:
> +		return -EOPNOTSUPP;

Same comment as above. Of note is that only BLKRESETZONE will result in cache
inconsistency if not taken care of with an invalidation of the cached blocks of
the zone on the cache device. Open and close operations have no effect on data.
Finish zone will artificially increase the zone write pointer to the end of the
zone to make it full but without actually writing any data. So there is no need
I think to change anything on the cache device in that case.

> +	default:
> +		/* Other commands fall through*/
> +		break;
> +	}
> +
>  	return __blkdev_driver_ioctl(dc->bdev, mode, cmd, arg);
>  }
>  
> @@ -1261,6 +1292,48 @@ static int cached_dev_congested(void *data, int bits)
>  	return ret;
>  }
>  
> +static int cached_dev_report_zones_cb(struct blk_zone *zone,
> +				      unsigned int idx,
> +				      void *data)
> +{
> +	struct bch_report_zones_args *args = data;
> +	struct bcache_device *d = args->bcache_device;
> +	struct cached_dev *dc = container_of(d, struct cached_dev, disk);
> +	unsigned long data_offset = dc->sb.data_offset;
> +
> +	if (zone->start >= data_offset) {
> +		zone->start -= data_offset;
> +		zone->wp -= data_offset;

Since the zone that contains the super block has to be ignored, the remapping of
the zone start can be done unconditionally. For the write pointer remapping, you
need to handle several cases: conventional zones, full zones and read-only zones
do not have a valid write pointer value, so no updating. You also need to skip
offline zones.

> +	} else {
> +		/*
> +		 * Normally the first zone is conventional zone,
> +		 * we don't need to worry about how to maintain
> +		 * the write pointer.
> +		 * But the zone->len is special, because the
> +		 * sector 0 on bcache device is 8KB offset on
> +		 * backing device indeed.
> +		 */
> +		zone->len -= data_offset;

This should not be necessary if the first zone containing the super block is
skipped entirely.

> +	}
> +
> +	return args->orig_cb(zone, idx, args->orig_data);
> +}
> +
> +static int cached_dev_report_zones(struct bch_report_zones_args *args,
> +				   unsigned int nr_zones)
> +{
> +	struct bcache_device *d = args->bcache_device;
> +	struct cached_dev *dc = container_of(d, struct cached_dev, disk);
> +	sector_t sector = args->sector + dc->sb.data_offset;
> +
> +	/* sector is real LBA of backing device */
> +	return blkdev_report_zones(dc->bdev,
> +				   sector,
> +				   nr_zones,
> +				   cached_dev_report_zones_cb,
> +				   args);
> +}
> +
>  void bch_cached_dev_request_init(struct cached_dev *dc)
>  {
>  	struct gendisk *g = dc->disk.disk;
> @@ -1268,6 +1341,7 @@ void bch_cached_dev_request_init(struct cached_dev *dc)
>  	g->queue->backing_dev_info->congested_fn = cached_dev_congested;
>  	dc->disk.cache_miss			= cached_dev_cache_miss;
>  	dc->disk.ioctl				= cached_dev_ioctl;
> +	dc->disk.report_zones			= cached_dev_report_zones;
>  }
>  
>  /* Flash backed devices */
> diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
> index d98354fa28e3..b7d496040cee 100644
> --- a/drivers/md/bcache/super.c
> +++ b/drivers/md/bcache/super.c
> @@ -679,10 +679,31 @@ static int ioctl_dev(struct block_device *b, fmode_t mode,
>  	return d->ioctl(d, mode, cmd, arg);
>  }
>  
> +static int report_zones_dev(struct gendisk *disk,
> +			    sector_t sector,
> +			    unsigned int nr_zones,
> +			    report_zones_cb cb,
> +			    void *data)
> +{
> +	struct bcache_device *d = disk->private_data;
> +	struct bch_report_zones_args args = {
> +		.bcache_device = d,
> +		.sector = sector,
> +		.orig_data = data,
> +		.orig_cb = cb,
> +	};
> +
> +	if (d->report_zones)
> +		return d->report_zones(&args, nr_zones);

It looks to me like this is not necessary. This function could just be
cached_dev_report_zones() and you can drop the dc->disk.report_zones method.

> +
> +	return -EOPNOTSUPP;
> +}
> +
>  static const struct block_device_operations bcache_ops = {
>  	.open		= open_dev,
>  	.release	= release_dev,
>  	.ioctl		= ioctl_dev,
> +	.report_zones	= report_zones_dev,
>  	.owner		= THIS_MODULE,
>  };
>  
> @@ -815,8 +836,12 @@ static void bcache_device_free(struct bcache_device *d)
>  	closure_debug_destroy(&d->cl);
>  }
>  
> -static int bcache_device_init(struct bcache_device *d, unsigned int block_size,
> -			      sector_t sectors, make_request_fn make_request_fn)
> +static int bcache_device_init(struct cached_dev *dc,
> +			      struct bcache_device *d,
> +			      unsigned int block_size,
> +			      sector_t sectors,
> +			      make_request_fn make_request_fn)
> +
>  {
>  	struct request_queue *q;
>  	const size_t max_stripes = min_t(size_t, INT_MAX,
> @@ -886,6 +911,17 @@ static int bcache_device_init(struct bcache_device *d, unsigned int block_size,
>  	blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, d->disk->queue);
>  	blk_queue_flag_set(QUEUE_FLAG_DISCARD, d->disk->queue);
>  
> +	/*
> +	 * If this is for backing device registration, and it is an
> +	 * zoned device (e.g. host-managed S.M.R. hard drive), set
> +	 * up zoned device attribution properly for sysfs interface.
> +	 */
> +	if (dc && bdev_is_zoned(dc->bdev)) {
> +		q->limits.zoned = bdev_zoned_model(dc->bdev);
> +		q->nr_zones = blkdev_nr_zones(dc->bdev->bd_disk);
> +		q->limits.chunk_sectors = bdev_zone_sectors(dc->bdev);

You need to call blk_revalidate_disk_zones() here:

	blk_revalidate_disk_zones(dc->bdev->bd_disk);

but call it *after* setting the bc device capacity to

	get_capacity(dc->bdev->bd_disk) - bdev_zone_sectors(dc->bdev);

Which I think is in fact the sectors argument to this function ?

With that information blk_revalidate_disk_zones() will check the zones and set
q->nr_zones.


> +	}
> +
>  	blk_queue_write_cache(q, true, true);
>  
>  	return 0;
> @@ -1337,9 +1373,9 @@ static int cached_dev_init(struct cached_dev *dc, unsigned int block_size)
>  		dc->partial_stripes_expensive =
>  			q->limits.raid_partial_stripes_expensive;
>  
> -	ret = bcache_device_init(&dc->disk, block_size,
> -			 dc->bdev->bd_part->nr_sects - dc->sb.data_offset,
> -			 cached_dev_make_request);
> +	ret = bcache_device_init(dc, &dc->disk, block_size,
> +			dc->bdev->bd_part->nr_sects - dc->sb.data_offset,

dc->sb.data_offset should be the device zone size (chunk sectors) to skip the
entire first zone and preserve the "all zones have the same size" constraint.

> +			cached_dev_make_request);
>  	if (ret)
>  		return ret;
>  
> @@ -1451,8 +1487,9 @@ static int flash_dev_run(struct cache_set *c, struct uuid_entry *u)
>  
>  	kobject_init(&d->kobj, &bch_flash_dev_ktype);
>  
> -	if (bcache_device_init(d, block_bytes(c), u->sectors,
> -			flash_dev_make_request))
> +	if (bcache_device_init(NULL, d, block_bytes(c),
> +			       u->sectors,
> +			       flash_dev_make_request))
>  		goto err;
>  
>  	bcache_device_attach(d, c, u - c->uuids);
> 


-- 
Damien Le Moal
Western Digital Research