From mboxrd@z Thu Jan  1 00:00:00 1970
From: Tan, Ley Foon <ley.foon.tan@intel.com>
Date: Wed, 23 Dec 2020 03:45:27 +0000
Subject: [v5 16/18] arm: socfpga: dts: soc64: Add binman node of FIT image
 with ATF support
In-Reply-To: <20201221164942.11640-17-elly.siew.chin.lim@intel.com>
References: <20201221164942.11640-1-elly.siew.chin.lim@intel.com>
 <20201221164942.11640-17-elly.siew.chin.lim@intel.com>
Message-ID: <BY5PR11MB3893E2AA72C5515C778FBED7CCDE0@BY5PR11MB3893.namprd11.prod.outlook.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de



> -----Original Message-----
> From: Lim, Elly Siew Chin <elly.siew.chin.lim@intel.com>
> Sent: Tuesday, December 22, 2020 12:50 AM
> To: u-boot at lists.denx.de
> Cc: Marek Vasut <marex@denx.de>; Tan, Ley Foon
> <ley.foon.tan@intel.com>; See, Chin Liang <chin.liang.see@intel.com>;
> Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>; Chee, Tien Fong
> <tien.fong.chee@intel.com>; Westergreen, Dalon
> <dalon.westergreen@intel.com>; Simon Glass <sjg@chromium.org>; Gan,
> Yau Wai <yau.wai.gan@intel.com>; Lim, Elly Siew Chin
> <elly.siew.chin.lim@intel.com>
> Subject: [v5 16/18] arm: socfpga: dts: soc64: Add binman node of FIT image
> with ATF support
> 
> Add binman node to device tree to generate the FIT image for u-boot
> (u-boot.itb) and OS kernel (kernel.itb).
> 
> u-boot.itb contains arm trusted firmware (ATF), u-boot proper and u-boot
> device tree for ATF u-boot flow.
> 
> kernel.itb contains Linux Image and Linux device tree.
> 
> Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
> 
> ---
> v5
> ---
> Change 'blob' to 'blob-ext' entry in binman dts node for all input files.
> The input files (u-boot proper, Linux image files) that required to build FIT
> images may not yet ready during u-boot compilation.
> By using 'blob-ext', binman will report warning instead of error during u-boot
> compilation when the input files doesn't exist.
> It wouldn't fail the u-boot compilation. Then, user can prepare the input files
> later, and use binman command to generate the FIT images.
> ---
>  arch/arm/dts/socfpga_agilex-u-boot.dtsi          |   4 +-
>  arch/arm/dts/socfpga_soc64_fit-u-boot.dtsi       | 120
> +++++++++++++++++++++++
>  arch/arm/dts/socfpga_stratix10-u-boot.dtsi       |   8 ++
>  arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi |   4 +-
>  4 files changed, 134 insertions(+), 2 deletions(-)  create mode 100644
> arch/arm/dts/socfpga_soc64_fit-u-boot.dtsi

Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>

Regards
Ley Foon