RE: usb: gadget: dwc2: not getting audio data

From: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
To: Palak SHAH <palak.shah@raritan.com>,
	Maynard CABIENTE <maynard.cabiente@raritan.com>
Cc: "linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>
Subject: RE: usb: gadget: dwc2: not getting audio data
Date: Fri, 24 Feb 2023 10:32:50 +0000	[thread overview]
Message-ID: <BYAPR12MB33990B69E647DC5128417573A7A89@BYAPR12MB3399.namprd12.prod.outlook.com> (raw)
In-Reply-To: <HE1PR0601MB25868FC836C3CD2D07B342958DAB9@HE1PR0601MB2586.eurprd06.prod.outlook.com>

Hi Polak,

>On 2/24/2023 3:04 AM, Palak SHAH wrote:
>From: Palak SHAH <palak.shah@raritan.com>
>Sent: Friday, February 24, 2023 3:04 AM
>To: Minas Harutyunyan <hminas@synopsys.com>; Maynard CABIENTE
><maynard.cabiente@raritan.com>
>Cc: linux-usb@vger.kernel.org
>Subject: RE: usb: gadget: dwc2: not getting audio data
>
>Hi Minas,
>I have attached the log where I connect to the audio gadget (and therefore,
>load the driver). We can do it using command line on a serial prompt or
>using GUI and connecting to Audio gadget.
>
>However, in both cases, I don’t see any EP1(out) data and the register dump.
>Ep1out comes out only when I play a you tube video and I do arecord to
>capture data.

According your device configuration EP1(out) using when you play audio,
and EP1(in) using when you record audio by arecord.
So, after driver loading these both ISOC EP's will not seen in log until
aplay/arecord will not run.

>
>Please let me know if the log doesn’t have the information you need.

No, it's again dmesg. I asked for core all register dump which available
under debugfs's. dwc2 debugfs's under follow directory:
/sys/kernel/debug/usb/dwc2.2.auto/
In your case 'dwc2.2.auto' can be little bit different. In this directory
there are files regdump, hw_params, params, fifo, etc. Just use 'cat regdump'
to get register dump. Please also provide me cat of hw_params, params
and fifo. These last 3 files need to cat just once after driver loading.

>
>Also, I tried changing UAC1_DEF_REQ_NUM 2 changed to 32. I saw a change in
>the behaivor of logs, I got XferCompl all the time, and not ep_disabled.

So, after defining UAC1_DEF_REQ_NUM to 32 playing audio (ep1out) work without
any issue? And increasing req number to 32 fixed issue which we debug till now?

>However, arecord behaivor did not change, meaning I still did not get the
>data. It only changed the logging behaivor.

If you still see issues with arecord (ep1in) then please provide me debug log
for this case and USB trace by Ellisys.

Thanks,
Minas