From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Content-Type: text/plain; charset=us-ascii Mime-Version: 1.0 (1.0) Subject: Re: [PATCH V4 0/3] Microchip mcp25xxfd can controller driver From: Martin Sperl In-Reply-To: Date: Thu, 21 Jun 2018 17:46:19 +0200 Content-Transfer-Encoding: quoted-printable Message-Id: References: <20180514160313.29597-1-kernel@martin.sperl.org> <6C9DAC2E-F20A-4FCE-A585-6DBCEEF97D08@martin.sperl.org> <4682a3b2-a924-0231-673c-566373cca412@grandegger.com> <51FF051D-FB8D-43B4-ADD8-7FEA380E6DEF@martin.sperl.org> To: Wolfgang Grandegger Cc: linux-can@vger.kernel.org, devicetree , Mark Kleine-Budde , Rob Herring , Mark Rutland , Marcel Birthelmer , Sukkin Pang , Gerhard Bertelsmann List-ID: > On 21.06.2018, at 09:38, Wolfgang Grandegger wrote: >=20 > Hello Martin, all, >=20 > I recently sent a review for: >=20 > [PATCH V3 2/3] can: mcp25xxfd: Add Microchip mcp25xxfd CAN FD driver >=20 > but it did not show up on the linux-can ml. I also cannot find the > original patch. Patch 2/3 from your V3 and V4 series is missing in the > archive. Is there a size limitation? >=20 I have experienced something similar - it shows up in the dt archive but not= in the can-archive... Version 1 and 2 were less than 128k and were accepted and archived. That was one of the reasons why I wanted to split the patches themselves and= not the file... Still I have received your comments and I shall incorporate them hopefully t= his weekend. Martin=