All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michal Kazior <michal.kazior@tieto.com>
To: Andreas Christoforou <aceoscy@gmail.com>
Cc: Andreas Christoforou <andreaschristofo@gmail.com>,
	"ath10k@lists.infradead.org" <ath10k@lists.infradead.org>
Subject: Re: ath10k raw mode
Date: Mon, 12 Dec 2016 14:33:59 +0100	[thread overview]
Message-ID: <CA+BoTQnzfoHE6SwuM819iA2PwB7sjYmz10Pv9b1C-fBdqMdLjA@mail.gmail.com> (raw)
In-Reply-To: <CAPd_300YffoiqezwWx82GuMiSHgC7kg6JCF8KNZ2_ytj=gnfzQ@mail.gmail.com>

On 12 December 2016 at 14:23, Andreas Christoforou <aceoscy@gmail.com> wrote:
> Dear Michal,
>
> unfortunately I am getting the following error
>
>   [ 50.416483] ath10k_pci 0000:07:00.0: firmware crashed! (uuid
> bdf6b230-c8f5-4e61-b174-93b0980ee5dc)
> [   50.425506] ath10k_pci 0000:07:00.0: qca988x hw2.0 (0x4100016c,
> 0x043202ff sub 0000:0000) fw 10.2.4.70.59-2 fwapi 5 bdapi 1 htt-ver 2.1
> wmi-op 5 htt-op 2 cal otp max-sta 128 raw 1 hwcrypto 0 features
> no-p2p,raw-mode
> [   50.444686] ath10k_pci 0000:07:00.0: debug 1 debugfs 1 tracing 1 dfs 0
> testmode 1
> [   50.454283] ath10k_pci 0000:07:00.0: firmware register dump:
> [   50.460008] ath10k_pci 0000:07:00.0: [00]: 0x4100016C 0x00000000
> 0x0097F8D5 0x00000000
> [   50.467940] ath10k_pci 0000:07:00.0: [04]: 0x00000000 0x00000000
> 0x00000000 0x00000000
> [   50.475908] ath10k_pci 0000:07:00.0: [08]: 0x00000000 0x00000000
> 0x00000000 0x00000000
> [   50.483865] ath10k_pci 0000:07:00.0: [12]: 0x00000000 0x00000000
> 0x00000000 0x00000000
> [   50.491869] ath10k_pci 0000:07:00.0: [16]: 0x00000000 0x00000000
> 0x00000000 0x0097F8D5
> [   50.499851] ath10k_pci 0000:07:00.0: [20]: 0x00000000 0x00401930
> 0x00000000 0x00000000
> [   50.507784] ath10k_pci 0000:07:00.0: [24]: 0x00000000 0x00000000
> 0x00000000 0x00000000
> [   50.515756] ath10k_pci 0000:07:00.0: [28]: 0x00000000 0x00000000
> 0x00000000 0x00000000
> [   50.523721] ath10k_pci 0000:07:00.0: [32]: 0x00000000 0x00000000
> 0x00000000 0x00000000
> [   50.531692] ath10k_pci 0000:07:00.0: [36]: 0x00000000 0x00000000
> 0x00000000 0x00000000
> [   50.539649] ath10k_pci 0000:07:00.0: [40]: 0x00000000 0x00000000
> 0x00000000 0x00000000
> [   50.547592] ath10k_pci 0000:07:00.0: [44]: 0x00000000 0x00000000
> 0x00000000 0x00000000
> [   50.555547] ath10k_pci 0000:07:00.0: [48]: 0x00000000 0x00000000
> 0x00000000 0x00000000
> [   50.563519] ath10k_pci 0000:07:00.0: [52]: 0x00000000 0x00000000
> 0x00000000 0x00000000
> [   50.571478] ath10k_pci 0000:07:00.0: [56]: 0x00000000 0x00000000
> 0x00000000 0x00000000
> [   50.583360] ath10k_warn: 6 callbacks suppressed
> [   50.587916] ath10k_pci 0000:07:00.0: failed to start WMI vdev 0: -108
> [   50.594461] ath10k_pci 0000:07:00.0: failed to start vdev 0 addr
> 00:00:00:00:00:00 on freq 2412: -108
> [   50.705799] ieee80211 phy0: Hardware restart was requested
> [   50.712476] ath10k_pci 0000:07:00.0: failed to flush transmit queue (skip
> 1 ar-state 2): 500
> [   50.722235] ath10k_pci 0000:07:00.0: failed to delete WMI vdev 0: -108

All I can tell from this is seems to crash when you try to start an
interface. Is it a monitor interface? If you intend to inject frames -
it's not supported. I'm not sure if anyone tried monitor mode for
sniffing with raw-mode enabled.


Michał

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  parent reply	other threads:[~2016-12-12 13:34 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-08 19:13 ath10k raw mode Andreas Christoforou
2016-12-09  8:40 ` Michal Kazior
     [not found]   ` <CAPd_300YffoiqezwWx82GuMiSHgC7kg6JCF8KNZ2_ytj=gnfzQ@mail.gmail.com>
2016-12-12 13:33     ` Michal Kazior [this message]
2021-05-23  2:00 Daniel Lenski
2021-05-23  2:18 ` Daniel Lenski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CA+BoTQnzfoHE6SwuM819iA2PwB7sjYmz10Pv9b1C-fBdqMdLjA@mail.gmail.com \
    --to=michal.kazior@tieto.com \
    --cc=aceoscy@gmail.com \
    --cc=andreaschristofo@gmail.com \
    --cc=ath10k@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.