All of lore.kernel.org
 help / color / mirror / Atom feed
* arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-09-21 13:20 ` Naresh Kamboju
  0 siblings, 0 replies; 41+ messages in thread
From: Naresh Kamboju @ 2020-09-21 13:20 UTC (permalink / raw)
  To: linux-mtd, open list, Linux-Next Mailing List, lkft-triage,
	open list:IOMMU DRIVERS
  Cc: masonccyang, Richard Weinberger, Joerg Roedel, Miquel Raynal,
	Suram Suram, Zhiqiang.Hou, Poonam Aggrwal, robh, Arnd Bergmann,
	Joerg Roedel

arm64  Freescale Layerscape 2088A RDB Board boot failed with linux-next
5.9.0-rc5-next-20200921 kernel tag version. The kernel warning and then
kernel panic happened.

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>

metadata:
  git branch: master
  git repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
  git commit: b10b8ad862118bf42c28a98b0f067619aadcfb23
  git describe: next-20200921
  make_kernelversion: 5.9.0-rc5
  kernel-config:
https://builds.tuxbuild.com/GxPuM0SSznSoSYYG8deYpQ/kernel.config


crash log,

[    1.811830] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
[    1.818202] nand: Micron MT29F16G08ABACAWP
[    1.822314] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
4096, OOB size: 224
[    1.830078] ------------[ cut here ]------------
[    1.834703] Driver must set ecc.strength when using hardware ECC
[    1.840739] WARNING: CPU: 1 PID: 1 at
drivers/mtd/nand/raw/nand_base.c:5671 nand_scan_with_ids+0x110c/0x1498
[    1.850568] Modules linked in:
[    1.853621] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
5.9.0-rc5-next-20200921 #1
[    1.861015] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
[    1.867368] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
[    1.873373] pc : nand_scan_with_ids+0x110c/0x1498
[    1.878073] lr : nand_scan_with_ids+0x110c/0x1498
[    1.882774] sp : ffff80001005ba50
[    1.886083] x29: ffff80001005ba50 x28: 0000000000000000
[    1.891395] x27: ffff0082edf98638 x26: 0000000000000048
[    1.896706] x25: 000000000000002c x24: ffff0082edf98578
[    1.902018] x23: 0000000000000001 x22: ffff0082ee6b0000
[    1.907329] x21: ffff0082edf98840 x20: 0000000000000000
[    1.912640] x19: ffff0082edf98080 x18: 0000000000000010
[    1.917951] x17: 0000000000000010 x16: 00000000833b5ff2
[    1.923262] x15: ffff0082ee6b0480 x14: ffffffffffffffff
[    1.928572] x13: ffff80009005b737 x12: ffff80001005b73f
[    1.933883] x11: ffff80001005ba50 x10: ffff80001005ba50
[    1.939194] x9 : ffffdc379157bfbc x8 : 657274732e636365
[    1.944504] x7 : 2074657320747375 x6 : ffffdc37937ba000
[    1.949815] x5 : ffffdc37937baa58 x4 : ffff80001005b840
[    1.955125] x3 : 0000000000000000 x2 : ffff0082ee6b0000
[    1.960436] x1 : 4732f0d38a403700 x0 : 0000000000000000
[    1.965748] Call trace:
[    1.968189]  nand_scan_with_ids+0x110c/0x1498
[    1.972542]  fsl_ifc_nand_probe+0x474/0x6e0
[    1.976723]  platform_drv_probe+0x5c/0xb0
[    1.980729]  really_probe+0xf0/0x4d8
[    1.984300]  driver_probe_device+0xfc/0x168
[    1.988480]  device_driver_attach+0x7c/0x88
[    1.992659]  __driver_attach+0xac/0x178
[    1.996490]  bus_for_each_dev+0x78/0xc8
[    2.000321]  driver_attach+0x2c/0x38
[    2.003893]  bus_add_driver+0x14c/0x230
[    2.007724]  driver_register+0x6c/0x128
[    2.011555]  __platform_driver_register+0x50/0x60
[    2.016258]  fsl_ifc_nand_driver_init+0x24/0x30
[    2.020786]  do_one_initcall+0x4c/0x2d0
[    2.024560] ata1: SATA link down (SStatus 0 SControl 300)
[    2.024618]  kernel_init_freeable+0x214/0x280
[    2.024624]  kernel_init+0x1c/0x120
[    2.037849]  ret_from_fork+0x10/0x30
[    2.041420] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
5.9.0-rc5-next-20200921 #1
[    2.048815] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
[    2.055166] Call trace:
[    2.057606]  dump_backtrace+0x0/0x1e0
[    2.061263]  show_stack+0x20/0x30
[    2.064574]  dump_stack+0xf8/0x168
[    2.067972]  __warn+0xfc/0x178
[    2.071023]  report_bug+0xfc/0x170
[    2.074419]  bug_handler+0x28/0x70
[    2.077816]  call_break_hook+0x70/0x88
[    2.080559] ata2: SATA link down (SStatus 0 SControl 300)
[    2.081560]  brk_handler+0x24/0x68
[    2.081566]  do_debug_exception+0xb8/0x130
[    2.094442]  el1_sync_handler+0xd8/0x120
[    2.098360]  el1_sync+0x80/0x100
[    2.101583]  nand_scan_with_ids+0x110c/0x1498
[    2.105935]  fsl_ifc_nand_probe+0x474/0x6e0
[    2.110115]  platform_drv_probe+0x5c/0xb0
[    2.114120]  really_probe+0xf0/0x4d8
[    2.117691]  driver_probe_device+0xfc/0x168
[    2.121871]  device_driver_attach+0x7c/0x88
[    2.126050]  __driver_attach+0xac/0x178
[    2.129882]  bus_for_each_dev+0x78/0xc8
[    2.133714]  driver_attach+0x2c/0x38
[    2.137284]  bus_add_driver+0x14c/0x230
[    2.141116]  driver_register+0x6c/0x128
[    2.144946]  __platform_driver_register+0x50/0x60
[    2.149647]  fsl_ifc_nand_driver_init+0x24/0x30
[    2.154173]  do_one_initcall+0x4c/0x2d0
[    2.158004]  kernel_init_freeable+0x214/0x280
[    2.162358]  kernel_init+0x1c/0x120
[    2.165841]  ret_from_fork+0x10/0x30
[    2.169415] ---[ end trace d051012f465b08eb ]---
[    2.174073] fsl,ifc-nand: probe of 530000000.nand failed with error -22
[    2.181882] spi-nor spi0.0: unrecognized JEDEC id bytes: 1c 38 78 e1 e3 c7
[    2.189409] spi-nor spi1.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00
[    2.196301] spi-nor: probe of spi1.0 failed with error -2
[    2.203202] libphy: Fixed MDIO Bus: probed
[    2.208607] thunder_xcv, ver 1.0
[    2.211860] thunder_bgx, ver 1.0
[    2.215114] nicpf, ver 1.0
[    2.218785] hclge is initializing
[    2.222141] hns3: Hisilicon Ethernet Network Driver for Hip08
Family - version
[    2.229371] hns3: Copyright (c) 2017 Huawei Corporation.
[    2.234716] e1000: Intel(R) PRO/1000 Network Driver
[    2.239598] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    2.245370] e1000e: Intel(R) PRO/1000 Network Driver
[    2.250338] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    2.256403] e1000e 0000:01:00.0: Adding to iommu group 0
[    2.261733] arm-smmu 5000000.iommu: Cannot accommodate DMA offset
for IOMMU page tables
[    2.269752] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
[    2.278544] Mem abort info:
[    2.281334]   ESR = 0x96000004
[    2.284389]   EC = 0x25: DABT (current EL), IL = 32 bits
[    2.289705]   SET = 0, FnV = 0
[    2.292759]   EA = 0, S1PTW = 0
[    2.295900] Data abort info:
[    2.298781]   ISV = 0, ISS = 0x00000004
[    2.302618]   CM = 0, WnR = 0
[    2.305581] [0000000000000000] user address but active_mm is swapper
[    2.311941] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    2.317512] Modules linked in:
[    2.320566] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W
  5.9.0-rc5-next-20200921 #1
[    2.329352] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
[    2.335705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[    2.341715] pc : arm_smmu_flush_iotlb_all+0x28/0x90
[    2.346590] lr : iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
[    2.353203] sp : ffff80001005b9b0
[    2.356511] x29: ffff80001005b9b0 x28: 0000000000000000
[    2.361822] x27: ffffdc3792e904e0 x26: ffff80001005ba48
[    2.367134] x25: ffff0082ee6b0000 x24: ffff0082ed88e0a8
[    2.372445] x23: 00000000fffffff4 x22: 0000000000001000
[    2.377755] x21: ffff80001005ba48 x20: 0000000000000000
[    2.383066] x19: ffff0082cceeeb58 x18: 0000000000000010
[    2.388377] x17: 0000000000000000 x16: 00000000833b5ff2
[    2.393688] x15: ffff0082ee6b0480 x14: 203a756d6d6f692e
[    2.398999] x13: 3030303030303520 x12: 61646f6d6d6f6363
[    2.404311] x11: 6120746f6e6e6143 x10: 6f66207465736666
[    2.409622] x9 : ffffdc3791d31078 x8 : ffff0082ed8ffd00
[    2.414933] x7 : 0000000000000000 x6 : 000000000000003f
[    2.420244] x5 : 0000000000000040 x4 : ffff80001005b970
[    2.425554] x3 : 0000000000000000 x2 : 0000000000000000
[    2.430865] x1 : ffffdc37927dd2f0 x0 : ffff0082cceeeb58
[    2.436176] Call trace:
[    2.438618]  arm_smmu_flush_iotlb_all+0x28/0x90
[    2.443144]  iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
[    2.449409]  iommu_probe_device+0x6c/0x120
[    2.453501]  of_iommu_configure+0x134/0x218
[    2.457683]  of_dma_configure_id+0x110/0x2e8
[    2.461950]  pci_dma_configure+0x4c/0xd8
[    2.465870]  really_probe+0xac/0x4d8
[    2.469441]  driver_probe_device+0xfc/0x168
[    2.473620]  device_driver_attach+0x7c/0x88
[    2.477799]  __driver_attach+0xac/0x178
[    2.481631]  bus_for_each_dev+0x78/0xc8
[    2.485463]  driver_attach+0x2c/0x38
[    2.489033]  bus_add_driver+0x14c/0x230
[    2.492865]  driver_register+0x6c/0x128
[    2.496696]  __pci_register_driver+0x4c/0x58
[    2.500964]  e1000_init_module+0x44/0x50
[    2.504882]  do_one_initcall+0x4c/0x2d0
[    2.508714]  kernel_init_freeable+0x214/0x280
[    2.513068]  kernel_init+0x1c/0x120
[    2.516552]  ret_from_fork+0x10/0x30
[    2.520124] Code: 910003fd a90153f3 aa0003f3 f85a8014 (f9400280)
[    2.526224] ---[ end trace d051012f465b08ec ]---
[    2.530848] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x0000000b
[    2.538506] SMP: stopping secondary CPUs
[    2.542431] Kernel Offset: 0x5c3781480000 from 0xffff800010000000
[    2.548521] PHYS_OFFSET: 0xffffdb6ac0000000
[    2.552700] CPU features: 0x0240022,21806008
[    2.556965] Memory Limit: none

full test log,
https://lavalab.nxp.com/scheduler/job/86650#L849

-- 
Linaro LKFT
https://lkft.linaro.org

^ permalink raw reply	[flat|nested] 41+ messages in thread

* arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-09-21 13:20 ` Naresh Kamboju
  0 siblings, 0 replies; 41+ messages in thread
From: Naresh Kamboju @ 2020-09-21 13:20 UTC (permalink / raw)
  To: linux-mtd, open list, Linux-Next Mailing List, lkft-triage,
	open list:IOMMU DRIVERS
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Joerg Roedel, Miquel Raynal, Suram Suram,
	masonccyang, Zhiqiang.Hou

arm64  Freescale Layerscape 2088A RDB Board boot failed with linux-next
5.9.0-rc5-next-20200921 kernel tag version. The kernel warning and then
kernel panic happened.

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>

metadata:
  git branch: master
  git repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
  git commit: b10b8ad862118bf42c28a98b0f067619aadcfb23
  git describe: next-20200921
  make_kernelversion: 5.9.0-rc5
  kernel-config:
https://builds.tuxbuild.com/GxPuM0SSznSoSYYG8deYpQ/kernel.config


crash log,

[    1.811830] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
[    1.818202] nand: Micron MT29F16G08ABACAWP
[    1.822314] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
4096, OOB size: 224
[    1.830078] ------------[ cut here ]------------
[    1.834703] Driver must set ecc.strength when using hardware ECC
[    1.840739] WARNING: CPU: 1 PID: 1 at
drivers/mtd/nand/raw/nand_base.c:5671 nand_scan_with_ids+0x110c/0x1498
[    1.850568] Modules linked in:
[    1.853621] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
5.9.0-rc5-next-20200921 #1
[    1.861015] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
[    1.867368] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
[    1.873373] pc : nand_scan_with_ids+0x110c/0x1498
[    1.878073] lr : nand_scan_with_ids+0x110c/0x1498
[    1.882774] sp : ffff80001005ba50
[    1.886083] x29: ffff80001005ba50 x28: 0000000000000000
[    1.891395] x27: ffff0082edf98638 x26: 0000000000000048
[    1.896706] x25: 000000000000002c x24: ffff0082edf98578
[    1.902018] x23: 0000000000000001 x22: ffff0082ee6b0000
[    1.907329] x21: ffff0082edf98840 x20: 0000000000000000
[    1.912640] x19: ffff0082edf98080 x18: 0000000000000010
[    1.917951] x17: 0000000000000010 x16: 00000000833b5ff2
[    1.923262] x15: ffff0082ee6b0480 x14: ffffffffffffffff
[    1.928572] x13: ffff80009005b737 x12: ffff80001005b73f
[    1.933883] x11: ffff80001005ba50 x10: ffff80001005ba50
[    1.939194] x9 : ffffdc379157bfbc x8 : 657274732e636365
[    1.944504] x7 : 2074657320747375 x6 : ffffdc37937ba000
[    1.949815] x5 : ffffdc37937baa58 x4 : ffff80001005b840
[    1.955125] x3 : 0000000000000000 x2 : ffff0082ee6b0000
[    1.960436] x1 : 4732f0d38a403700 x0 : 0000000000000000
[    1.965748] Call trace:
[    1.968189]  nand_scan_with_ids+0x110c/0x1498
[    1.972542]  fsl_ifc_nand_probe+0x474/0x6e0
[    1.976723]  platform_drv_probe+0x5c/0xb0
[    1.980729]  really_probe+0xf0/0x4d8
[    1.984300]  driver_probe_device+0xfc/0x168
[    1.988480]  device_driver_attach+0x7c/0x88
[    1.992659]  __driver_attach+0xac/0x178
[    1.996490]  bus_for_each_dev+0x78/0xc8
[    2.000321]  driver_attach+0x2c/0x38
[    2.003893]  bus_add_driver+0x14c/0x230
[    2.007724]  driver_register+0x6c/0x128
[    2.011555]  __platform_driver_register+0x50/0x60
[    2.016258]  fsl_ifc_nand_driver_init+0x24/0x30
[    2.020786]  do_one_initcall+0x4c/0x2d0
[    2.024560] ata1: SATA link down (SStatus 0 SControl 300)
[    2.024618]  kernel_init_freeable+0x214/0x280
[    2.024624]  kernel_init+0x1c/0x120
[    2.037849]  ret_from_fork+0x10/0x30
[    2.041420] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
5.9.0-rc5-next-20200921 #1
[    2.048815] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
[    2.055166] Call trace:
[    2.057606]  dump_backtrace+0x0/0x1e0
[    2.061263]  show_stack+0x20/0x30
[    2.064574]  dump_stack+0xf8/0x168
[    2.067972]  __warn+0xfc/0x178
[    2.071023]  report_bug+0xfc/0x170
[    2.074419]  bug_handler+0x28/0x70
[    2.077816]  call_break_hook+0x70/0x88
[    2.080559] ata2: SATA link down (SStatus 0 SControl 300)
[    2.081560]  brk_handler+0x24/0x68
[    2.081566]  do_debug_exception+0xb8/0x130
[    2.094442]  el1_sync_handler+0xd8/0x120
[    2.098360]  el1_sync+0x80/0x100
[    2.101583]  nand_scan_with_ids+0x110c/0x1498
[    2.105935]  fsl_ifc_nand_probe+0x474/0x6e0
[    2.110115]  platform_drv_probe+0x5c/0xb0
[    2.114120]  really_probe+0xf0/0x4d8
[    2.117691]  driver_probe_device+0xfc/0x168
[    2.121871]  device_driver_attach+0x7c/0x88
[    2.126050]  __driver_attach+0xac/0x178
[    2.129882]  bus_for_each_dev+0x78/0xc8
[    2.133714]  driver_attach+0x2c/0x38
[    2.137284]  bus_add_driver+0x14c/0x230
[    2.141116]  driver_register+0x6c/0x128
[    2.144946]  __platform_driver_register+0x50/0x60
[    2.149647]  fsl_ifc_nand_driver_init+0x24/0x30
[    2.154173]  do_one_initcall+0x4c/0x2d0
[    2.158004]  kernel_init_freeable+0x214/0x280
[    2.162358]  kernel_init+0x1c/0x120
[    2.165841]  ret_from_fork+0x10/0x30
[    2.169415] ---[ end trace d051012f465b08eb ]---
[    2.174073] fsl,ifc-nand: probe of 530000000.nand failed with error -22
[    2.181882] spi-nor spi0.0: unrecognized JEDEC id bytes: 1c 38 78 e1 e3 c7
[    2.189409] spi-nor spi1.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00
[    2.196301] spi-nor: probe of spi1.0 failed with error -2
[    2.203202] libphy: Fixed MDIO Bus: probed
[    2.208607] thunder_xcv, ver 1.0
[    2.211860] thunder_bgx, ver 1.0
[    2.215114] nicpf, ver 1.0
[    2.218785] hclge is initializing
[    2.222141] hns3: Hisilicon Ethernet Network Driver for Hip08
Family - version
[    2.229371] hns3: Copyright (c) 2017 Huawei Corporation.
[    2.234716] e1000: Intel(R) PRO/1000 Network Driver
[    2.239598] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    2.245370] e1000e: Intel(R) PRO/1000 Network Driver
[    2.250338] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    2.256403] e1000e 0000:01:00.0: Adding to iommu group 0
[    2.261733] arm-smmu 5000000.iommu: Cannot accommodate DMA offset
for IOMMU page tables
[    2.269752] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
[    2.278544] Mem abort info:
[    2.281334]   ESR = 0x96000004
[    2.284389]   EC = 0x25: DABT (current EL), IL = 32 bits
[    2.289705]   SET = 0, FnV = 0
[    2.292759]   EA = 0, S1PTW = 0
[    2.295900] Data abort info:
[    2.298781]   ISV = 0, ISS = 0x00000004
[    2.302618]   CM = 0, WnR = 0
[    2.305581] [0000000000000000] user address but active_mm is swapper
[    2.311941] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    2.317512] Modules linked in:
[    2.320566] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W
  5.9.0-rc5-next-20200921 #1
[    2.329352] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
[    2.335705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[    2.341715] pc : arm_smmu_flush_iotlb_all+0x28/0x90
[    2.346590] lr : iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
[    2.353203] sp : ffff80001005b9b0
[    2.356511] x29: ffff80001005b9b0 x28: 0000000000000000
[    2.361822] x27: ffffdc3792e904e0 x26: ffff80001005ba48
[    2.367134] x25: ffff0082ee6b0000 x24: ffff0082ed88e0a8
[    2.372445] x23: 00000000fffffff4 x22: 0000000000001000
[    2.377755] x21: ffff80001005ba48 x20: 0000000000000000
[    2.383066] x19: ffff0082cceeeb58 x18: 0000000000000010
[    2.388377] x17: 0000000000000000 x16: 00000000833b5ff2
[    2.393688] x15: ffff0082ee6b0480 x14: 203a756d6d6f692e
[    2.398999] x13: 3030303030303520 x12: 61646f6d6d6f6363
[    2.404311] x11: 6120746f6e6e6143 x10: 6f66207465736666
[    2.409622] x9 : ffffdc3791d31078 x8 : ffff0082ed8ffd00
[    2.414933] x7 : 0000000000000000 x6 : 000000000000003f
[    2.420244] x5 : 0000000000000040 x4 : ffff80001005b970
[    2.425554] x3 : 0000000000000000 x2 : 0000000000000000
[    2.430865] x1 : ffffdc37927dd2f0 x0 : ffff0082cceeeb58
[    2.436176] Call trace:
[    2.438618]  arm_smmu_flush_iotlb_all+0x28/0x90
[    2.443144]  iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
[    2.449409]  iommu_probe_device+0x6c/0x120
[    2.453501]  of_iommu_configure+0x134/0x218
[    2.457683]  of_dma_configure_id+0x110/0x2e8
[    2.461950]  pci_dma_configure+0x4c/0xd8
[    2.465870]  really_probe+0xac/0x4d8
[    2.469441]  driver_probe_device+0xfc/0x168
[    2.473620]  device_driver_attach+0x7c/0x88
[    2.477799]  __driver_attach+0xac/0x178
[    2.481631]  bus_for_each_dev+0x78/0xc8
[    2.485463]  driver_attach+0x2c/0x38
[    2.489033]  bus_add_driver+0x14c/0x230
[    2.492865]  driver_register+0x6c/0x128
[    2.496696]  __pci_register_driver+0x4c/0x58
[    2.500964]  e1000_init_module+0x44/0x50
[    2.504882]  do_one_initcall+0x4c/0x2d0
[    2.508714]  kernel_init_freeable+0x214/0x280
[    2.513068]  kernel_init+0x1c/0x120
[    2.516552]  ret_from_fork+0x10/0x30
[    2.520124] Code: 910003fd a90153f3 aa0003f3 f85a8014 (f9400280)
[    2.526224] ---[ end trace d051012f465b08ec ]---
[    2.530848] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x0000000b
[    2.538506] SMP: stopping secondary CPUs
[    2.542431] Kernel Offset: 0x5c3781480000 from 0xffff800010000000
[    2.548521] PHYS_OFFSET: 0xffffdb6ac0000000
[    2.552700] CPU features: 0x0240022,21806008
[    2.556965] Memory Limit: none

full test log,
https://lavalab.nxp.com/scheduler/job/86650#L849

-- 
Linaro LKFT
https://lkft.linaro.org

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 41+ messages in thread

* arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-09-21 13:20 ` Naresh Kamboju
  0 siblings, 0 replies; 41+ messages in thread
From: Naresh Kamboju @ 2020-09-21 13:20 UTC (permalink / raw)
  To: linux-mtd, open list, Linux-Next Mailing List, lkft-triage,
	open list:IOMMU DRIVERS
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Miquel Raynal, Suram Suram, masonccyang,
	Zhiqiang.Hou

arm64  Freescale Layerscape 2088A RDB Board boot failed with linux-next
5.9.0-rc5-next-20200921 kernel tag version. The kernel warning and then
kernel panic happened.

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>

metadata:
  git branch: master
  git repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
  git commit: b10b8ad862118bf42c28a98b0f067619aadcfb23
  git describe: next-20200921
  make_kernelversion: 5.9.0-rc5
  kernel-config:
https://builds.tuxbuild.com/GxPuM0SSznSoSYYG8deYpQ/kernel.config


crash log,

[    1.811830] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
[    1.818202] nand: Micron MT29F16G08ABACAWP
[    1.822314] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
4096, OOB size: 224
[    1.830078] ------------[ cut here ]------------
[    1.834703] Driver must set ecc.strength when using hardware ECC
[    1.840739] WARNING: CPU: 1 PID: 1 at
drivers/mtd/nand/raw/nand_base.c:5671 nand_scan_with_ids+0x110c/0x1498
[    1.850568] Modules linked in:
[    1.853621] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
5.9.0-rc5-next-20200921 #1
[    1.861015] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
[    1.867368] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
[    1.873373] pc : nand_scan_with_ids+0x110c/0x1498
[    1.878073] lr : nand_scan_with_ids+0x110c/0x1498
[    1.882774] sp : ffff80001005ba50
[    1.886083] x29: ffff80001005ba50 x28: 0000000000000000
[    1.891395] x27: ffff0082edf98638 x26: 0000000000000048
[    1.896706] x25: 000000000000002c x24: ffff0082edf98578
[    1.902018] x23: 0000000000000001 x22: ffff0082ee6b0000
[    1.907329] x21: ffff0082edf98840 x20: 0000000000000000
[    1.912640] x19: ffff0082edf98080 x18: 0000000000000010
[    1.917951] x17: 0000000000000010 x16: 00000000833b5ff2
[    1.923262] x15: ffff0082ee6b0480 x14: ffffffffffffffff
[    1.928572] x13: ffff80009005b737 x12: ffff80001005b73f
[    1.933883] x11: ffff80001005ba50 x10: ffff80001005ba50
[    1.939194] x9 : ffffdc379157bfbc x8 : 657274732e636365
[    1.944504] x7 : 2074657320747375 x6 : ffffdc37937ba000
[    1.949815] x5 : ffffdc37937baa58 x4 : ffff80001005b840
[    1.955125] x3 : 0000000000000000 x2 : ffff0082ee6b0000
[    1.960436] x1 : 4732f0d38a403700 x0 : 0000000000000000
[    1.965748] Call trace:
[    1.968189]  nand_scan_with_ids+0x110c/0x1498
[    1.972542]  fsl_ifc_nand_probe+0x474/0x6e0
[    1.976723]  platform_drv_probe+0x5c/0xb0
[    1.980729]  really_probe+0xf0/0x4d8
[    1.984300]  driver_probe_device+0xfc/0x168
[    1.988480]  device_driver_attach+0x7c/0x88
[    1.992659]  __driver_attach+0xac/0x178
[    1.996490]  bus_for_each_dev+0x78/0xc8
[    2.000321]  driver_attach+0x2c/0x38
[    2.003893]  bus_add_driver+0x14c/0x230
[    2.007724]  driver_register+0x6c/0x128
[    2.011555]  __platform_driver_register+0x50/0x60
[    2.016258]  fsl_ifc_nand_driver_init+0x24/0x30
[    2.020786]  do_one_initcall+0x4c/0x2d0
[    2.024560] ata1: SATA link down (SStatus 0 SControl 300)
[    2.024618]  kernel_init_freeable+0x214/0x280
[    2.024624]  kernel_init+0x1c/0x120
[    2.037849]  ret_from_fork+0x10/0x30
[    2.041420] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
5.9.0-rc5-next-20200921 #1
[    2.048815] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
[    2.055166] Call trace:
[    2.057606]  dump_backtrace+0x0/0x1e0
[    2.061263]  show_stack+0x20/0x30
[    2.064574]  dump_stack+0xf8/0x168
[    2.067972]  __warn+0xfc/0x178
[    2.071023]  report_bug+0xfc/0x170
[    2.074419]  bug_handler+0x28/0x70
[    2.077816]  call_break_hook+0x70/0x88
[    2.080559] ata2: SATA link down (SStatus 0 SControl 300)
[    2.081560]  brk_handler+0x24/0x68
[    2.081566]  do_debug_exception+0xb8/0x130
[    2.094442]  el1_sync_handler+0xd8/0x120
[    2.098360]  el1_sync+0x80/0x100
[    2.101583]  nand_scan_with_ids+0x110c/0x1498
[    2.105935]  fsl_ifc_nand_probe+0x474/0x6e0
[    2.110115]  platform_drv_probe+0x5c/0xb0
[    2.114120]  really_probe+0xf0/0x4d8
[    2.117691]  driver_probe_device+0xfc/0x168
[    2.121871]  device_driver_attach+0x7c/0x88
[    2.126050]  __driver_attach+0xac/0x178
[    2.129882]  bus_for_each_dev+0x78/0xc8
[    2.133714]  driver_attach+0x2c/0x38
[    2.137284]  bus_add_driver+0x14c/0x230
[    2.141116]  driver_register+0x6c/0x128
[    2.144946]  __platform_driver_register+0x50/0x60
[    2.149647]  fsl_ifc_nand_driver_init+0x24/0x30
[    2.154173]  do_one_initcall+0x4c/0x2d0
[    2.158004]  kernel_init_freeable+0x214/0x280
[    2.162358]  kernel_init+0x1c/0x120
[    2.165841]  ret_from_fork+0x10/0x30
[    2.169415] ---[ end trace d051012f465b08eb ]---
[    2.174073] fsl,ifc-nand: probe of 530000000.nand failed with error -22
[    2.181882] spi-nor spi0.0: unrecognized JEDEC id bytes: 1c 38 78 e1 e3 c7
[    2.189409] spi-nor spi1.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00
[    2.196301] spi-nor: probe of spi1.0 failed with error -2
[    2.203202] libphy: Fixed MDIO Bus: probed
[    2.208607] thunder_xcv, ver 1.0
[    2.211860] thunder_bgx, ver 1.0
[    2.215114] nicpf, ver 1.0
[    2.218785] hclge is initializing
[    2.222141] hns3: Hisilicon Ethernet Network Driver for Hip08
Family - version
[    2.229371] hns3: Copyright (c) 2017 Huawei Corporation.
[    2.234716] e1000: Intel(R) PRO/1000 Network Driver
[    2.239598] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    2.245370] e1000e: Intel(R) PRO/1000 Network Driver
[    2.250338] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    2.256403] e1000e 0000:01:00.0: Adding to iommu group 0
[    2.261733] arm-smmu 5000000.iommu: Cannot accommodate DMA offset
for IOMMU page tables
[    2.269752] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
[    2.278544] Mem abort info:
[    2.281334]   ESR = 0x96000004
[    2.284389]   EC = 0x25: DABT (current EL), IL = 32 bits
[    2.289705]   SET = 0, FnV = 0
[    2.292759]   EA = 0, S1PTW = 0
[    2.295900] Data abort info:
[    2.298781]   ISV = 0, ISS = 0x00000004
[    2.302618]   CM = 0, WnR = 0
[    2.305581] [0000000000000000] user address but active_mm is swapper
[    2.311941] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    2.317512] Modules linked in:
[    2.320566] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W
  5.9.0-rc5-next-20200921 #1
[    2.329352] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
[    2.335705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[    2.341715] pc : arm_smmu_flush_iotlb_all+0x28/0x90
[    2.346590] lr : iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
[    2.353203] sp : ffff80001005b9b0
[    2.356511] x29: ffff80001005b9b0 x28: 0000000000000000
[    2.361822] x27: ffffdc3792e904e0 x26: ffff80001005ba48
[    2.367134] x25: ffff0082ee6b0000 x24: ffff0082ed88e0a8
[    2.372445] x23: 00000000fffffff4 x22: 0000000000001000
[    2.377755] x21: ffff80001005ba48 x20: 0000000000000000
[    2.383066] x19: ffff0082cceeeb58 x18: 0000000000000010
[    2.388377] x17: 0000000000000000 x16: 00000000833b5ff2
[    2.393688] x15: ffff0082ee6b0480 x14: 203a756d6d6f692e
[    2.398999] x13: 3030303030303520 x12: 61646f6d6d6f6363
[    2.404311] x11: 6120746f6e6e6143 x10: 6f66207465736666
[    2.409622] x9 : ffffdc3791d31078 x8 : ffff0082ed8ffd00
[    2.414933] x7 : 0000000000000000 x6 : 000000000000003f
[    2.420244] x5 : 0000000000000040 x4 : ffff80001005b970
[    2.425554] x3 : 0000000000000000 x2 : 0000000000000000
[    2.430865] x1 : ffffdc37927dd2f0 x0 : ffff0082cceeeb58
[    2.436176] Call trace:
[    2.438618]  arm_smmu_flush_iotlb_all+0x28/0x90
[    2.443144]  iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
[    2.449409]  iommu_probe_device+0x6c/0x120
[    2.453501]  of_iommu_configure+0x134/0x218
[    2.457683]  of_dma_configure_id+0x110/0x2e8
[    2.461950]  pci_dma_configure+0x4c/0xd8
[    2.465870]  really_probe+0xac/0x4d8
[    2.469441]  driver_probe_device+0xfc/0x168
[    2.473620]  device_driver_attach+0x7c/0x88
[    2.477799]  __driver_attach+0xac/0x178
[    2.481631]  bus_for_each_dev+0x78/0xc8
[    2.485463]  driver_attach+0x2c/0x38
[    2.489033]  bus_add_driver+0x14c/0x230
[    2.492865]  driver_register+0x6c/0x128
[    2.496696]  __pci_register_driver+0x4c/0x58
[    2.500964]  e1000_init_module+0x44/0x50
[    2.504882]  do_one_initcall+0x4c/0x2d0
[    2.508714]  kernel_init_freeable+0x214/0x280
[    2.513068]  kernel_init+0x1c/0x120
[    2.516552]  ret_from_fork+0x10/0x30
[    2.520124] Code: 910003fd a90153f3 aa0003f3 f85a8014 (f9400280)
[    2.526224] ---[ end trace d051012f465b08ec ]---
[    2.530848] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x0000000b
[    2.538506] SMP: stopping secondary CPUs
[    2.542431] Kernel Offset: 0x5c3781480000 from 0xffff800010000000
[    2.548521] PHYS_OFFSET: 0xffffdb6ac0000000
[    2.552700] CPU features: 0x0240022,21806008
[    2.556965] Memory Limit: none

full test log,
https://lavalab.nxp.com/scheduler/job/86650#L849

-- 
Linaro LKFT
https://lkft.linaro.org
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-09-21 13:20 ` Naresh Kamboju
  (?)
@ 2020-09-21 14:51   ` Robin Murphy
  -1 siblings, 0 replies; 41+ messages in thread
From: Robin Murphy @ 2020-09-21 14:51 UTC (permalink / raw)
  To: Naresh Kamboju, linux-mtd, open list, Linux-Next Mailing List,
	lkft-triage, open list:IOMMU DRIVERS
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Miquel Raynal, Suram Suram, masonccyang,
	Zhiqiang.Hou

On 2020-09-21 14:20, Naresh Kamboju wrote:
[...]
> [    2.256403] e1000e 0000:01:00.0: Adding to iommu group 0
> [    2.261733] arm-smmu 5000000.iommu: Cannot accommodate DMA offset
> for IOMMU page tables

Ah, I know what's going on there - the dma_range_map stuff has 
overlooked a subtlety, but it's easily fixed.

> [    2.269752] Unable to handle kernel NULL pointer dereference at
> virtual address 0000000000000000

...although either way that's really not how we should subsequently 
handle failing to allocate a pagetable. I guess I'll take a look into 
what the deal is there as well :(

Robin.

> [    2.278544] Mem abort info:
> [    2.281334]   ESR = 0x96000004
> [    2.284389]   EC = 0x25: DABT (current EL), IL = 32 bits
> [    2.289705]   SET = 0, FnV = 0
> [    2.292759]   EA = 0, S1PTW = 0
> [    2.295900] Data abort info:
> [    2.298781]   ISV = 0, ISS = 0x00000004
> [    2.302618]   CM = 0, WnR = 0
> [    2.305581] [0000000000000000] user address but active_mm is swapper
> [    2.311941] Internal error: Oops: 96000004 [#1] PREEMPT SMP
> [    2.317512] Modules linked in:
> [    2.320566] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W
>    5.9.0-rc5-next-20200921 #1
> [    2.329352] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
> [    2.335705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
> [    2.341715] pc : arm_smmu_flush_iotlb_all+0x28/0x90
> [    2.346590] lr : iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
> [    2.353203] sp : ffff80001005b9b0
> [    2.356511] x29: ffff80001005b9b0 x28: 0000000000000000
> [    2.361822] x27: ffffdc3792e904e0 x26: ffff80001005ba48
> [    2.367134] x25: ffff0082ee6b0000 x24: ffff0082ed88e0a8
> [    2.372445] x23: 00000000fffffff4 x22: 0000000000001000
> [    2.377755] x21: ffff80001005ba48 x20: 0000000000000000
> [    2.383066] x19: ffff0082cceeeb58 x18: 0000000000000010
> [    2.388377] x17: 0000000000000000 x16: 00000000833b5ff2
> [    2.393688] x15: ffff0082ee6b0480 x14: 203a756d6d6f692e
> [    2.398999] x13: 3030303030303520 x12: 61646f6d6d6f6363
> [    2.404311] x11: 6120746f6e6e6143 x10: 6f66207465736666
> [    2.409622] x9 : ffffdc3791d31078 x8 : ffff0082ed8ffd00
> [    2.414933] x7 : 0000000000000000 x6 : 000000000000003f
> [    2.420244] x5 : 0000000000000040 x4 : ffff80001005b970
> [    2.425554] x3 : 0000000000000000 x2 : 0000000000000000
> [    2.430865] x1 : ffffdc37927dd2f0 x0 : ffff0082cceeeb58
> [    2.436176] Call trace:
> [    2.438618]  arm_smmu_flush_iotlb_all+0x28/0x90
> [    2.443144]  iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
> [    2.449409]  iommu_probe_device+0x6c/0x120
> [    2.453501]  of_iommu_configure+0x134/0x218
> [    2.457683]  of_dma_configure_id+0x110/0x2e8
> [    2.461950]  pci_dma_configure+0x4c/0xd8
> [    2.465870]  really_probe+0xac/0x4d8
> [    2.469441]  driver_probe_device+0xfc/0x168
> [    2.473620]  device_driver_attach+0x7c/0x88
> [    2.477799]  __driver_attach+0xac/0x178
> [    2.481631]  bus_for_each_dev+0x78/0xc8
> [    2.485463]  driver_attach+0x2c/0x38
> [    2.489033]  bus_add_driver+0x14c/0x230
> [    2.492865]  driver_register+0x6c/0x128
> [    2.496696]  __pci_register_driver+0x4c/0x58
> [    2.500964]  e1000_init_module+0x44/0x50
> [    2.504882]  do_one_initcall+0x4c/0x2d0
> [    2.508714]  kernel_init_freeable+0x214/0x280
> [    2.513068]  kernel_init+0x1c/0x120
> [    2.516552]  ret_from_fork+0x10/0x30
> [    2.520124] Code: 910003fd a90153f3 aa0003f3 f85a8014 (f9400280)
> [    2.526224] ---[ end trace d051012f465b08ec ]---
> [    2.530848] Kernel panic - not syncing: Attempted to kill init!
> exitcode=0x0000000b
> [    2.538506] SMP: stopping secondary CPUs
> [    2.542431] Kernel Offset: 0x5c3781480000 from 0xffff800010000000
> [    2.548521] PHYS_OFFSET: 0xffffdb6ac0000000
> [    2.552700] CPU features: 0x0240022,21806008
> [    2.556965] Memory Limit: none
> 
> full test log,
> https://lavalab.nxp.com/scheduler/job/86650#L849
> 

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-09-21 14:51   ` Robin Murphy
  0 siblings, 0 replies; 41+ messages in thread
From: Robin Murphy @ 2020-09-21 14:51 UTC (permalink / raw)
  To: Naresh Kamboju, linux-mtd, open list, Linux-Next Mailing List,
	lkft-triage, open list:IOMMU DRIVERS
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Zhiqiang.Hou, Miquel Raynal, Suram Suram,
	masonccyang

On 2020-09-21 14:20, Naresh Kamboju wrote:
[...]
> [    2.256403] e1000e 0000:01:00.0: Adding to iommu group 0
> [    2.261733] arm-smmu 5000000.iommu: Cannot accommodate DMA offset
> for IOMMU page tables

Ah, I know what's going on there - the dma_range_map stuff has 
overlooked a subtlety, but it's easily fixed.

> [    2.269752] Unable to handle kernel NULL pointer dereference at
> virtual address 0000000000000000

...although either way that's really not how we should subsequently 
handle failing to allocate a pagetable. I guess I'll take a look into 
what the deal is there as well :(

Robin.

> [    2.278544] Mem abort info:
> [    2.281334]   ESR = 0x96000004
> [    2.284389]   EC = 0x25: DABT (current EL), IL = 32 bits
> [    2.289705]   SET = 0, FnV = 0
> [    2.292759]   EA = 0, S1PTW = 0
> [    2.295900] Data abort info:
> [    2.298781]   ISV = 0, ISS = 0x00000004
> [    2.302618]   CM = 0, WnR = 0
> [    2.305581] [0000000000000000] user address but active_mm is swapper
> [    2.311941] Internal error: Oops: 96000004 [#1] PREEMPT SMP
> [    2.317512] Modules linked in:
> [    2.320566] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W
>    5.9.0-rc5-next-20200921 #1
> [    2.329352] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
> [    2.335705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
> [    2.341715] pc : arm_smmu_flush_iotlb_all+0x28/0x90
> [    2.346590] lr : iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
> [    2.353203] sp : ffff80001005b9b0
> [    2.356511] x29: ffff80001005b9b0 x28: 0000000000000000
> [    2.361822] x27: ffffdc3792e904e0 x26: ffff80001005ba48
> [    2.367134] x25: ffff0082ee6b0000 x24: ffff0082ed88e0a8
> [    2.372445] x23: 00000000fffffff4 x22: 0000000000001000
> [    2.377755] x21: ffff80001005ba48 x20: 0000000000000000
> [    2.383066] x19: ffff0082cceeeb58 x18: 0000000000000010
> [    2.388377] x17: 0000000000000000 x16: 00000000833b5ff2
> [    2.393688] x15: ffff0082ee6b0480 x14: 203a756d6d6f692e
> [    2.398999] x13: 3030303030303520 x12: 61646f6d6d6f6363
> [    2.404311] x11: 6120746f6e6e6143 x10: 6f66207465736666
> [    2.409622] x9 : ffffdc3791d31078 x8 : ffff0082ed8ffd00
> [    2.414933] x7 : 0000000000000000 x6 : 000000000000003f
> [    2.420244] x5 : 0000000000000040 x4 : ffff80001005b970
> [    2.425554] x3 : 0000000000000000 x2 : 0000000000000000
> [    2.430865] x1 : ffffdc37927dd2f0 x0 : ffff0082cceeeb58
> [    2.436176] Call trace:
> [    2.438618]  arm_smmu_flush_iotlb_all+0x28/0x90
> [    2.443144]  iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
> [    2.449409]  iommu_probe_device+0x6c/0x120
> [    2.453501]  of_iommu_configure+0x134/0x218
> [    2.457683]  of_dma_configure_id+0x110/0x2e8
> [    2.461950]  pci_dma_configure+0x4c/0xd8
> [    2.465870]  really_probe+0xac/0x4d8
> [    2.469441]  driver_probe_device+0xfc/0x168
> [    2.473620]  device_driver_attach+0x7c/0x88
> [    2.477799]  __driver_attach+0xac/0x178
> [    2.481631]  bus_for_each_dev+0x78/0xc8
> [    2.485463]  driver_attach+0x2c/0x38
> [    2.489033]  bus_add_driver+0x14c/0x230
> [    2.492865]  driver_register+0x6c/0x128
> [    2.496696]  __pci_register_driver+0x4c/0x58
> [    2.500964]  e1000_init_module+0x44/0x50
> [    2.504882]  do_one_initcall+0x4c/0x2d0
> [    2.508714]  kernel_init_freeable+0x214/0x280
> [    2.513068]  kernel_init+0x1c/0x120
> [    2.516552]  ret_from_fork+0x10/0x30
> [    2.520124] Code: 910003fd a90153f3 aa0003f3 f85a8014 (f9400280)
> [    2.526224] ---[ end trace d051012f465b08ec ]---
> [    2.530848] Kernel panic - not syncing: Attempted to kill init!
> exitcode=0x0000000b
> [    2.538506] SMP: stopping secondary CPUs
> [    2.542431] Kernel Offset: 0x5c3781480000 from 0xffff800010000000
> [    2.548521] PHYS_OFFSET: 0xffffdb6ac0000000
> [    2.552700] CPU features: 0x0240022,21806008
> [    2.556965] Memory Limit: none
> 
> full test log,
> https://lavalab.nxp.com/scheduler/job/86650#L849
> 

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-09-21 14:51   ` Robin Murphy
  0 siblings, 0 replies; 41+ messages in thread
From: Robin Murphy @ 2020-09-21 14:51 UTC (permalink / raw)
  To: Naresh Kamboju, linux-mtd, open list, Linux-Next Mailing List,
	lkft-triage, open list:IOMMU DRIVERS
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Zhiqiang.Hou, Miquel Raynal, Suram Suram,
	masonccyang

On 2020-09-21 14:20, Naresh Kamboju wrote:
[...]
> [    2.256403] e1000e 0000:01:00.0: Adding to iommu group 0
> [    2.261733] arm-smmu 5000000.iommu: Cannot accommodate DMA offset
> for IOMMU page tables

Ah, I know what's going on there - the dma_range_map stuff has 
overlooked a subtlety, but it's easily fixed.

> [    2.269752] Unable to handle kernel NULL pointer dereference at
> virtual address 0000000000000000

...although either way that's really not how we should subsequently 
handle failing to allocate a pagetable. I guess I'll take a look into 
what the deal is there as well :(

Robin.

> [    2.278544] Mem abort info:
> [    2.281334]   ESR = 0x96000004
> [    2.284389]   EC = 0x25: DABT (current EL), IL = 32 bits
> [    2.289705]   SET = 0, FnV = 0
> [    2.292759]   EA = 0, S1PTW = 0
> [    2.295900] Data abort info:
> [    2.298781]   ISV = 0, ISS = 0x00000004
> [    2.302618]   CM = 0, WnR = 0
> [    2.305581] [0000000000000000] user address but active_mm is swapper
> [    2.311941] Internal error: Oops: 96000004 [#1] PREEMPT SMP
> [    2.317512] Modules linked in:
> [    2.320566] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W
>    5.9.0-rc5-next-20200921 #1
> [    2.329352] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
> [    2.335705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
> [    2.341715] pc : arm_smmu_flush_iotlb_all+0x28/0x90
> [    2.346590] lr : iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
> [    2.353203] sp : ffff80001005b9b0
> [    2.356511] x29: ffff80001005b9b0 x28: 0000000000000000
> [    2.361822] x27: ffffdc3792e904e0 x26: ffff80001005ba48
> [    2.367134] x25: ffff0082ee6b0000 x24: ffff0082ed88e0a8
> [    2.372445] x23: 00000000fffffff4 x22: 0000000000001000
> [    2.377755] x21: ffff80001005ba48 x20: 0000000000000000
> [    2.383066] x19: ffff0082cceeeb58 x18: 0000000000000010
> [    2.388377] x17: 0000000000000000 x16: 00000000833b5ff2
> [    2.393688] x15: ffff0082ee6b0480 x14: 203a756d6d6f692e
> [    2.398999] x13: 3030303030303520 x12: 61646f6d6d6f6363
> [    2.404311] x11: 6120746f6e6e6143 x10: 6f66207465736666
> [    2.409622] x9 : ffffdc3791d31078 x8 : ffff0082ed8ffd00
> [    2.414933] x7 : 0000000000000000 x6 : 000000000000003f
> [    2.420244] x5 : 0000000000000040 x4 : ffff80001005b970
> [    2.425554] x3 : 0000000000000000 x2 : 0000000000000000
> [    2.430865] x1 : ffffdc37927dd2f0 x0 : ffff0082cceeeb58
> [    2.436176] Call trace:
> [    2.438618]  arm_smmu_flush_iotlb_all+0x28/0x90
> [    2.443144]  iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
> [    2.449409]  iommu_probe_device+0x6c/0x120
> [    2.453501]  of_iommu_configure+0x134/0x218
> [    2.457683]  of_dma_configure_id+0x110/0x2e8
> [    2.461950]  pci_dma_configure+0x4c/0xd8
> [    2.465870]  really_probe+0xac/0x4d8
> [    2.469441]  driver_probe_device+0xfc/0x168
> [    2.473620]  device_driver_attach+0x7c/0x88
> [    2.477799]  __driver_attach+0xac/0x178
> [    2.481631]  bus_for_each_dev+0x78/0xc8
> [    2.485463]  driver_attach+0x2c/0x38
> [    2.489033]  bus_add_driver+0x14c/0x230
> [    2.492865]  driver_register+0x6c/0x128
> [    2.496696]  __pci_register_driver+0x4c/0x58
> [    2.500964]  e1000_init_module+0x44/0x50
> [    2.504882]  do_one_initcall+0x4c/0x2d0
> [    2.508714]  kernel_init_freeable+0x214/0x280
> [    2.513068]  kernel_init+0x1c/0x120
> [    2.516552]  ret_from_fork+0x10/0x30
> [    2.520124] Code: 910003fd a90153f3 aa0003f3 f85a8014 (f9400280)
> [    2.526224] ---[ end trace d051012f465b08ec ]---
> [    2.530848] Kernel panic - not syncing: Attempted to kill init!
> exitcode=0x0000000b
> [    2.538506] SMP: stopping secondary CPUs
> [    2.542431] Kernel Offset: 0x5c3781480000 from 0xffff800010000000
> [    2.548521] PHYS_OFFSET: 0xffffdb6ac0000000
> [    2.552700] CPU features: 0x0240022,21806008
> [    2.556965] Memory Limit: none
> 
> full test log,
> https://lavalab.nxp.com/scheduler/job/86650#L849
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-09-21 13:20 ` Naresh Kamboju
  (?)
@ 2020-09-24  9:03   ` Joerg Roedel
  -1 siblings, 0 replies; 41+ messages in thread
From: Joerg Roedel @ 2020-09-24  9:03 UTC (permalink / raw)
  To: Naresh Kamboju, Will Deacon, Robin Murphy
  Cc: linux-mtd, open list, Linux-Next Mailing List, lkft-triage,
	open list:IOMMU DRIVERS, masonccyang, Richard Weinberger,
	Miquel Raynal, Suram Suram, Zhiqiang.Hou, Poonam Aggrwal, robh,
	Arnd Bergmann, Joerg Roedel

Adding Will and Robin.

On Mon, Sep 21, 2020 at 06:50:40PM +0530, Naresh Kamboju wrote:
> arm64  Freescale Layerscape 2088A RDB Board boot failed with linux-next
> 5.9.0-rc5-next-20200921 kernel tag version. The kernel warning and then
> kernel panic happened.
> 
> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
> 
> metadata:
>   git branch: master
>   git repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
>   git commit: b10b8ad862118bf42c28a98b0f067619aadcfb23
>   git describe: next-20200921
>   make_kernelversion: 5.9.0-rc5
>   kernel-config:
> https://builds.tuxbuild.com/GxPuM0SSznSoSYYG8deYpQ/kernel.config
> 
> 
> crash log,
> 
> [    1.811830] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
> [    1.818202] nand: Micron MT29F16G08ABACAWP
> [    1.822314] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
> 4096, OOB size: 224
> [    1.830078] ------------[ cut here ]------------
> [    1.834703] Driver must set ecc.strength when using hardware ECC
> [    1.840739] WARNING: CPU: 1 PID: 1 at
> drivers/mtd/nand/raw/nand_base.c:5671 nand_scan_with_ids+0x110c/0x1498
> [    1.850568] Modules linked in:
> [    1.853621] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
> 5.9.0-rc5-next-20200921 #1
> [    1.861015] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
> [    1.867368] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
> [    1.873373] pc : nand_scan_with_ids+0x110c/0x1498
> [    1.878073] lr : nand_scan_with_ids+0x110c/0x1498
> [    1.882774] sp : ffff80001005ba50
> [    1.886083] x29: ffff80001005ba50 x28: 0000000000000000
> [    1.891395] x27: ffff0082edf98638 x26: 0000000000000048
> [    1.896706] x25: 000000000000002c x24: ffff0082edf98578
> [    1.902018] x23: 0000000000000001 x22: ffff0082ee6b0000
> [    1.907329] x21: ffff0082edf98840 x20: 0000000000000000
> [    1.912640] x19: ffff0082edf98080 x18: 0000000000000010
> [    1.917951] x17: 0000000000000010 x16: 00000000833b5ff2
> [    1.923262] x15: ffff0082ee6b0480 x14: ffffffffffffffff
> [    1.928572] x13: ffff80009005b737 x12: ffff80001005b73f
> [    1.933883] x11: ffff80001005ba50 x10: ffff80001005ba50
> [    1.939194] x9 : ffffdc379157bfbc x8 : 657274732e636365
> [    1.944504] x7 : 2074657320747375 x6 : ffffdc37937ba000
> [    1.949815] x5 : ffffdc37937baa58 x4 : ffff80001005b840
> [    1.955125] x3 : 0000000000000000 x2 : ffff0082ee6b0000
> [    1.960436] x1 : 4732f0d38a403700 x0 : 0000000000000000
> [    1.965748] Call trace:
> [    1.968189]  nand_scan_with_ids+0x110c/0x1498
> [    1.972542]  fsl_ifc_nand_probe+0x474/0x6e0
> [    1.976723]  platform_drv_probe+0x5c/0xb0
> [    1.980729]  really_probe+0xf0/0x4d8
> [    1.984300]  driver_probe_device+0xfc/0x168
> [    1.988480]  device_driver_attach+0x7c/0x88
> [    1.992659]  __driver_attach+0xac/0x178
> [    1.996490]  bus_for_each_dev+0x78/0xc8
> [    2.000321]  driver_attach+0x2c/0x38
> [    2.003893]  bus_add_driver+0x14c/0x230
> [    2.007724]  driver_register+0x6c/0x128
> [    2.011555]  __platform_driver_register+0x50/0x60
> [    2.016258]  fsl_ifc_nand_driver_init+0x24/0x30
> [    2.020786]  do_one_initcall+0x4c/0x2d0
> [    2.024560] ata1: SATA link down (SStatus 0 SControl 300)
> [    2.024618]  kernel_init_freeable+0x214/0x280
> [    2.024624]  kernel_init+0x1c/0x120
> [    2.037849]  ret_from_fork+0x10/0x30
> [    2.041420] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
> 5.9.0-rc5-next-20200921 #1
> [    2.048815] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
> [    2.055166] Call trace:
> [    2.057606]  dump_backtrace+0x0/0x1e0
> [    2.061263]  show_stack+0x20/0x30
> [    2.064574]  dump_stack+0xf8/0x168
> [    2.067972]  __warn+0xfc/0x178
> [    2.071023]  report_bug+0xfc/0x170
> [    2.074419]  bug_handler+0x28/0x70
> [    2.077816]  call_break_hook+0x70/0x88
> [    2.080559] ata2: SATA link down (SStatus 0 SControl 300)
> [    2.081560]  brk_handler+0x24/0x68
> [    2.081566]  do_debug_exception+0xb8/0x130
> [    2.094442]  el1_sync_handler+0xd8/0x120
> [    2.098360]  el1_sync+0x80/0x100
> [    2.101583]  nand_scan_with_ids+0x110c/0x1498
> [    2.105935]  fsl_ifc_nand_probe+0x474/0x6e0
> [    2.110115]  platform_drv_probe+0x5c/0xb0
> [    2.114120]  really_probe+0xf0/0x4d8
> [    2.117691]  driver_probe_device+0xfc/0x168
> [    2.121871]  device_driver_attach+0x7c/0x88
> [    2.126050]  __driver_attach+0xac/0x178
> [    2.129882]  bus_for_each_dev+0x78/0xc8
> [    2.133714]  driver_attach+0x2c/0x38
> [    2.137284]  bus_add_driver+0x14c/0x230
> [    2.141116]  driver_register+0x6c/0x128
> [    2.144946]  __platform_driver_register+0x50/0x60
> [    2.149647]  fsl_ifc_nand_driver_init+0x24/0x30
> [    2.154173]  do_one_initcall+0x4c/0x2d0
> [    2.158004]  kernel_init_freeable+0x214/0x280
> [    2.162358]  kernel_init+0x1c/0x120
> [    2.165841]  ret_from_fork+0x10/0x30
> [    2.169415] ---[ end trace d051012f465b08eb ]---
> [    2.174073] fsl,ifc-nand: probe of 530000000.nand failed with error -22
> [    2.181882] spi-nor spi0.0: unrecognized JEDEC id bytes: 1c 38 78 e1 e3 c7
> [    2.189409] spi-nor spi1.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00
> [    2.196301] spi-nor: probe of spi1.0 failed with error -2
> [    2.203202] libphy: Fixed MDIO Bus: probed
> [    2.208607] thunder_xcv, ver 1.0
> [    2.211860] thunder_bgx, ver 1.0
> [    2.215114] nicpf, ver 1.0
> [    2.218785] hclge is initializing
> [    2.222141] hns3: Hisilicon Ethernet Network Driver for Hip08
> Family - version
> [    2.229371] hns3: Copyright (c) 2017 Huawei Corporation.
> [    2.234716] e1000: Intel(R) PRO/1000 Network Driver
> [    2.239598] e1000: Copyright (c) 1999-2006 Intel Corporation.
> [    2.245370] e1000e: Intel(R) PRO/1000 Network Driver
> [    2.250338] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
> [    2.256403] e1000e 0000:01:00.0: Adding to iommu group 0
> [    2.261733] arm-smmu 5000000.iommu: Cannot accommodate DMA offset
> for IOMMU page tables
> [    2.269752] Unable to handle kernel NULL pointer dereference at
> virtual address 0000000000000000
> [    2.278544] Mem abort info:
> [    2.281334]   ESR = 0x96000004
> [    2.284389]   EC = 0x25: DABT (current EL), IL = 32 bits
> [    2.289705]   SET = 0, FnV = 0
> [    2.292759]   EA = 0, S1PTW = 0
> [    2.295900] Data abort info:
> [    2.298781]   ISV = 0, ISS = 0x00000004
> [    2.302618]   CM = 0, WnR = 0
> [    2.305581] [0000000000000000] user address but active_mm is swapper
> [    2.311941] Internal error: Oops: 96000004 [#1] PREEMPT SMP
> [    2.317512] Modules linked in:
> [    2.320566] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W
>   5.9.0-rc5-next-20200921 #1
> [    2.329352] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
> [    2.335705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
> [    2.341715] pc : arm_smmu_flush_iotlb_all+0x28/0x90
> [    2.346590] lr : iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
> [    2.353203] sp : ffff80001005b9b0
> [    2.356511] x29: ffff80001005b9b0 x28: 0000000000000000
> [    2.361822] x27: ffffdc3792e904e0 x26: ffff80001005ba48
> [    2.367134] x25: ffff0082ee6b0000 x24: ffff0082ed88e0a8
> [    2.372445] x23: 00000000fffffff4 x22: 0000000000001000
> [    2.377755] x21: ffff80001005ba48 x20: 0000000000000000
> [    2.383066] x19: ffff0082cceeeb58 x18: 0000000000000010
> [    2.388377] x17: 0000000000000000 x16: 00000000833b5ff2
> [    2.393688] x15: ffff0082ee6b0480 x14: 203a756d6d6f692e
> [    2.398999] x13: 3030303030303520 x12: 61646f6d6d6f6363
> [    2.404311] x11: 6120746f6e6e6143 x10: 6f66207465736666
> [    2.409622] x9 : ffffdc3791d31078 x8 : ffff0082ed8ffd00
> [    2.414933] x7 : 0000000000000000 x6 : 000000000000003f
> [    2.420244] x5 : 0000000000000040 x4 : ffff80001005b970
> [    2.425554] x3 : 0000000000000000 x2 : 0000000000000000
> [    2.430865] x1 : ffffdc37927dd2f0 x0 : ffff0082cceeeb58
> [    2.436176] Call trace:
> [    2.438618]  arm_smmu_flush_iotlb_all+0x28/0x90
> [    2.443144]  iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
> [    2.449409]  iommu_probe_device+0x6c/0x120
> [    2.453501]  of_iommu_configure+0x134/0x218
> [    2.457683]  of_dma_configure_id+0x110/0x2e8
> [    2.461950]  pci_dma_configure+0x4c/0xd8
> [    2.465870]  really_probe+0xac/0x4d8
> [    2.469441]  driver_probe_device+0xfc/0x168
> [    2.473620]  device_driver_attach+0x7c/0x88
> [    2.477799]  __driver_attach+0xac/0x178
> [    2.481631]  bus_for_each_dev+0x78/0xc8
> [    2.485463]  driver_attach+0x2c/0x38
> [    2.489033]  bus_add_driver+0x14c/0x230
> [    2.492865]  driver_register+0x6c/0x128
> [    2.496696]  __pci_register_driver+0x4c/0x58
> [    2.500964]  e1000_init_module+0x44/0x50
> [    2.504882]  do_one_initcall+0x4c/0x2d0
> [    2.508714]  kernel_init_freeable+0x214/0x280
> [    2.513068]  kernel_init+0x1c/0x120
> [    2.516552]  ret_from_fork+0x10/0x30
> [    2.520124] Code: 910003fd a90153f3 aa0003f3 f85a8014 (f9400280)
> [    2.526224] ---[ end trace d051012f465b08ec ]---
> [    2.530848] Kernel panic - not syncing: Attempted to kill init!
> exitcode=0x0000000b
> [    2.538506] SMP: stopping secondary CPUs
> [    2.542431] Kernel Offset: 0x5c3781480000 from 0xffff800010000000
> [    2.548521] PHYS_OFFSET: 0xffffdb6ac0000000
> [    2.552700] CPU features: 0x0240022,21806008
> [    2.556965] Memory Limit: none
> 
> full test log,
> https://lavalab.nxp.com/scheduler/job/86650#L849
> 
> -- 
> Linaro LKFT
> https://lkft.linaro.org

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-09-24  9:03   ` Joerg Roedel
  0 siblings, 0 replies; 41+ messages in thread
From: Joerg Roedel @ 2020-09-24  9:03 UTC (permalink / raw)
  To: Naresh Kamboju, Will Deacon, Robin Murphy
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Zhiqiang.Hou, open list, lkft-triage,
	open list:IOMMU DRIVERS, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang

Adding Will and Robin.

On Mon, Sep 21, 2020 at 06:50:40PM +0530, Naresh Kamboju wrote:
> arm64  Freescale Layerscape 2088A RDB Board boot failed with linux-next
> 5.9.0-rc5-next-20200921 kernel tag version. The kernel warning and then
> kernel panic happened.
> 
> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
> 
> metadata:
>   git branch: master
>   git repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
>   git commit: b10b8ad862118bf42c28a98b0f067619aadcfb23
>   git describe: next-20200921
>   make_kernelversion: 5.9.0-rc5
>   kernel-config:
> https://builds.tuxbuild.com/GxPuM0SSznSoSYYG8deYpQ/kernel.config
> 
> 
> crash log,
> 
> [    1.811830] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
> [    1.818202] nand: Micron MT29F16G08ABACAWP
> [    1.822314] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
> 4096, OOB size: 224
> [    1.830078] ------------[ cut here ]------------
> [    1.834703] Driver must set ecc.strength when using hardware ECC
> [    1.840739] WARNING: CPU: 1 PID: 1 at
> drivers/mtd/nand/raw/nand_base.c:5671 nand_scan_with_ids+0x110c/0x1498
> [    1.850568] Modules linked in:
> [    1.853621] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
> 5.9.0-rc5-next-20200921 #1
> [    1.861015] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
> [    1.867368] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
> [    1.873373] pc : nand_scan_with_ids+0x110c/0x1498
> [    1.878073] lr : nand_scan_with_ids+0x110c/0x1498
> [    1.882774] sp : ffff80001005ba50
> [    1.886083] x29: ffff80001005ba50 x28: 0000000000000000
> [    1.891395] x27: ffff0082edf98638 x26: 0000000000000048
> [    1.896706] x25: 000000000000002c x24: ffff0082edf98578
> [    1.902018] x23: 0000000000000001 x22: ffff0082ee6b0000
> [    1.907329] x21: ffff0082edf98840 x20: 0000000000000000
> [    1.912640] x19: ffff0082edf98080 x18: 0000000000000010
> [    1.917951] x17: 0000000000000010 x16: 00000000833b5ff2
> [    1.923262] x15: ffff0082ee6b0480 x14: ffffffffffffffff
> [    1.928572] x13: ffff80009005b737 x12: ffff80001005b73f
> [    1.933883] x11: ffff80001005ba50 x10: ffff80001005ba50
> [    1.939194] x9 : ffffdc379157bfbc x8 : 657274732e636365
> [    1.944504] x7 : 2074657320747375 x6 : ffffdc37937ba000
> [    1.949815] x5 : ffffdc37937baa58 x4 : ffff80001005b840
> [    1.955125] x3 : 0000000000000000 x2 : ffff0082ee6b0000
> [    1.960436] x1 : 4732f0d38a403700 x0 : 0000000000000000
> [    1.965748] Call trace:
> [    1.968189]  nand_scan_with_ids+0x110c/0x1498
> [    1.972542]  fsl_ifc_nand_probe+0x474/0x6e0
> [    1.976723]  platform_drv_probe+0x5c/0xb0
> [    1.980729]  really_probe+0xf0/0x4d8
> [    1.984300]  driver_probe_device+0xfc/0x168
> [    1.988480]  device_driver_attach+0x7c/0x88
> [    1.992659]  __driver_attach+0xac/0x178
> [    1.996490]  bus_for_each_dev+0x78/0xc8
> [    2.000321]  driver_attach+0x2c/0x38
> [    2.003893]  bus_add_driver+0x14c/0x230
> [    2.007724]  driver_register+0x6c/0x128
> [    2.011555]  __platform_driver_register+0x50/0x60
> [    2.016258]  fsl_ifc_nand_driver_init+0x24/0x30
> [    2.020786]  do_one_initcall+0x4c/0x2d0
> [    2.024560] ata1: SATA link down (SStatus 0 SControl 300)
> [    2.024618]  kernel_init_freeable+0x214/0x280
> [    2.024624]  kernel_init+0x1c/0x120
> [    2.037849]  ret_from_fork+0x10/0x30
> [    2.041420] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
> 5.9.0-rc5-next-20200921 #1
> [    2.048815] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
> [    2.055166] Call trace:
> [    2.057606]  dump_backtrace+0x0/0x1e0
> [    2.061263]  show_stack+0x20/0x30
> [    2.064574]  dump_stack+0xf8/0x168
> [    2.067972]  __warn+0xfc/0x178
> [    2.071023]  report_bug+0xfc/0x170
> [    2.074419]  bug_handler+0x28/0x70
> [    2.077816]  call_break_hook+0x70/0x88
> [    2.080559] ata2: SATA link down (SStatus 0 SControl 300)
> [    2.081560]  brk_handler+0x24/0x68
> [    2.081566]  do_debug_exception+0xb8/0x130
> [    2.094442]  el1_sync_handler+0xd8/0x120
> [    2.098360]  el1_sync+0x80/0x100
> [    2.101583]  nand_scan_with_ids+0x110c/0x1498
> [    2.105935]  fsl_ifc_nand_probe+0x474/0x6e0
> [    2.110115]  platform_drv_probe+0x5c/0xb0
> [    2.114120]  really_probe+0xf0/0x4d8
> [    2.117691]  driver_probe_device+0xfc/0x168
> [    2.121871]  device_driver_attach+0x7c/0x88
> [    2.126050]  __driver_attach+0xac/0x178
> [    2.129882]  bus_for_each_dev+0x78/0xc8
> [    2.133714]  driver_attach+0x2c/0x38
> [    2.137284]  bus_add_driver+0x14c/0x230
> [    2.141116]  driver_register+0x6c/0x128
> [    2.144946]  __platform_driver_register+0x50/0x60
> [    2.149647]  fsl_ifc_nand_driver_init+0x24/0x30
> [    2.154173]  do_one_initcall+0x4c/0x2d0
> [    2.158004]  kernel_init_freeable+0x214/0x280
> [    2.162358]  kernel_init+0x1c/0x120
> [    2.165841]  ret_from_fork+0x10/0x30
> [    2.169415] ---[ end trace d051012f465b08eb ]---
> [    2.174073] fsl,ifc-nand: probe of 530000000.nand failed with error -22
> [    2.181882] spi-nor spi0.0: unrecognized JEDEC id bytes: 1c 38 78 e1 e3 c7
> [    2.189409] spi-nor spi1.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00
> [    2.196301] spi-nor: probe of spi1.0 failed with error -2
> [    2.203202] libphy: Fixed MDIO Bus: probed
> [    2.208607] thunder_xcv, ver 1.0
> [    2.211860] thunder_bgx, ver 1.0
> [    2.215114] nicpf, ver 1.0
> [    2.218785] hclge is initializing
> [    2.222141] hns3: Hisilicon Ethernet Network Driver for Hip08
> Family - version
> [    2.229371] hns3: Copyright (c) 2017 Huawei Corporation.
> [    2.234716] e1000: Intel(R) PRO/1000 Network Driver
> [    2.239598] e1000: Copyright (c) 1999-2006 Intel Corporation.
> [    2.245370] e1000e: Intel(R) PRO/1000 Network Driver
> [    2.250338] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
> [    2.256403] e1000e 0000:01:00.0: Adding to iommu group 0
> [    2.261733] arm-smmu 5000000.iommu: Cannot accommodate DMA offset
> for IOMMU page tables
> [    2.269752] Unable to handle kernel NULL pointer dereference at
> virtual address 0000000000000000
> [    2.278544] Mem abort info:
> [    2.281334]   ESR = 0x96000004
> [    2.284389]   EC = 0x25: DABT (current EL), IL = 32 bits
> [    2.289705]   SET = 0, FnV = 0
> [    2.292759]   EA = 0, S1PTW = 0
> [    2.295900] Data abort info:
> [    2.298781]   ISV = 0, ISS = 0x00000004
> [    2.302618]   CM = 0, WnR = 0
> [    2.305581] [0000000000000000] user address but active_mm is swapper
> [    2.311941] Internal error: Oops: 96000004 [#1] PREEMPT SMP
> [    2.317512] Modules linked in:
> [    2.320566] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W
>   5.9.0-rc5-next-20200921 #1
> [    2.329352] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
> [    2.335705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
> [    2.341715] pc : arm_smmu_flush_iotlb_all+0x28/0x90
> [    2.346590] lr : iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
> [    2.353203] sp : ffff80001005b9b0
> [    2.356511] x29: ffff80001005b9b0 x28: 0000000000000000
> [    2.361822] x27: ffffdc3792e904e0 x26: ffff80001005ba48
> [    2.367134] x25: ffff0082ee6b0000 x24: ffff0082ed88e0a8
> [    2.372445] x23: 00000000fffffff4 x22: 0000000000001000
> [    2.377755] x21: ffff80001005ba48 x20: 0000000000000000
> [    2.383066] x19: ffff0082cceeeb58 x18: 0000000000000010
> [    2.388377] x17: 0000000000000000 x16: 00000000833b5ff2
> [    2.393688] x15: ffff0082ee6b0480 x14: 203a756d6d6f692e
> [    2.398999] x13: 3030303030303520 x12: 61646f6d6d6f6363
> [    2.404311] x11: 6120746f6e6e6143 x10: 6f66207465736666
> [    2.409622] x9 : ffffdc3791d31078 x8 : ffff0082ed8ffd00
> [    2.414933] x7 : 0000000000000000 x6 : 000000000000003f
> [    2.420244] x5 : 0000000000000040 x4 : ffff80001005b970
> [    2.425554] x3 : 0000000000000000 x2 : 0000000000000000
> [    2.430865] x1 : ffffdc37927dd2f0 x0 : ffff0082cceeeb58
> [    2.436176] Call trace:
> [    2.438618]  arm_smmu_flush_iotlb_all+0x28/0x90
> [    2.443144]  iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
> [    2.449409]  iommu_probe_device+0x6c/0x120
> [    2.453501]  of_iommu_configure+0x134/0x218
> [    2.457683]  of_dma_configure_id+0x110/0x2e8
> [    2.461950]  pci_dma_configure+0x4c/0xd8
> [    2.465870]  really_probe+0xac/0x4d8
> [    2.469441]  driver_probe_device+0xfc/0x168
> [    2.473620]  device_driver_attach+0x7c/0x88
> [    2.477799]  __driver_attach+0xac/0x178
> [    2.481631]  bus_for_each_dev+0x78/0xc8
> [    2.485463]  driver_attach+0x2c/0x38
> [    2.489033]  bus_add_driver+0x14c/0x230
> [    2.492865]  driver_register+0x6c/0x128
> [    2.496696]  __pci_register_driver+0x4c/0x58
> [    2.500964]  e1000_init_module+0x44/0x50
> [    2.504882]  do_one_initcall+0x4c/0x2d0
> [    2.508714]  kernel_init_freeable+0x214/0x280
> [    2.513068]  kernel_init+0x1c/0x120
> [    2.516552]  ret_from_fork+0x10/0x30
> [    2.520124] Code: 910003fd a90153f3 aa0003f3 f85a8014 (f9400280)
> [    2.526224] ---[ end trace d051012f465b08ec ]---
> [    2.530848] Kernel panic - not syncing: Attempted to kill init!
> exitcode=0x0000000b
> [    2.538506] SMP: stopping secondary CPUs
> [    2.542431] Kernel Offset: 0x5c3781480000 from 0xffff800010000000
> [    2.548521] PHYS_OFFSET: 0xffffdb6ac0000000
> [    2.552700] CPU features: 0x0240022,21806008
> [    2.556965] Memory Limit: none
> 
> full test log,
> https://lavalab.nxp.com/scheduler/job/86650#L849
> 
> -- 
> Linaro LKFT
> https://lkft.linaro.org

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-09-24  9:03   ` Joerg Roedel
  0 siblings, 0 replies; 41+ messages in thread
From: Joerg Roedel @ 2020-09-24  9:03 UTC (permalink / raw)
  To: Naresh Kamboju, Will Deacon, Robin Murphy
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Zhiqiang.Hou, open list, lkft-triage,
	open list:IOMMU DRIVERS, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang

Adding Will and Robin.

On Mon, Sep 21, 2020 at 06:50:40PM +0530, Naresh Kamboju wrote:
> arm64  Freescale Layerscape 2088A RDB Board boot failed with linux-next
> 5.9.0-rc5-next-20200921 kernel tag version. The kernel warning and then
> kernel panic happened.
> 
> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
> 
> metadata:
>   git branch: master
>   git repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
>   git commit: b10b8ad862118bf42c28a98b0f067619aadcfb23
>   git describe: next-20200921
>   make_kernelversion: 5.9.0-rc5
>   kernel-config:
> https://builds.tuxbuild.com/GxPuM0SSznSoSYYG8deYpQ/kernel.config
> 
> 
> crash log,
> 
> [    1.811830] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
> [    1.818202] nand: Micron MT29F16G08ABACAWP
> [    1.822314] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
> 4096, OOB size: 224
> [    1.830078] ------------[ cut here ]------------
> [    1.834703] Driver must set ecc.strength when using hardware ECC
> [    1.840739] WARNING: CPU: 1 PID: 1 at
> drivers/mtd/nand/raw/nand_base.c:5671 nand_scan_with_ids+0x110c/0x1498
> [    1.850568] Modules linked in:
> [    1.853621] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
> 5.9.0-rc5-next-20200921 #1
> [    1.861015] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
> [    1.867368] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
> [    1.873373] pc : nand_scan_with_ids+0x110c/0x1498
> [    1.878073] lr : nand_scan_with_ids+0x110c/0x1498
> [    1.882774] sp : ffff80001005ba50
> [    1.886083] x29: ffff80001005ba50 x28: 0000000000000000
> [    1.891395] x27: ffff0082edf98638 x26: 0000000000000048
> [    1.896706] x25: 000000000000002c x24: ffff0082edf98578
> [    1.902018] x23: 0000000000000001 x22: ffff0082ee6b0000
> [    1.907329] x21: ffff0082edf98840 x20: 0000000000000000
> [    1.912640] x19: ffff0082edf98080 x18: 0000000000000010
> [    1.917951] x17: 0000000000000010 x16: 00000000833b5ff2
> [    1.923262] x15: ffff0082ee6b0480 x14: ffffffffffffffff
> [    1.928572] x13: ffff80009005b737 x12: ffff80001005b73f
> [    1.933883] x11: ffff80001005ba50 x10: ffff80001005ba50
> [    1.939194] x9 : ffffdc379157bfbc x8 : 657274732e636365
> [    1.944504] x7 : 2074657320747375 x6 : ffffdc37937ba000
> [    1.949815] x5 : ffffdc37937baa58 x4 : ffff80001005b840
> [    1.955125] x3 : 0000000000000000 x2 : ffff0082ee6b0000
> [    1.960436] x1 : 4732f0d38a403700 x0 : 0000000000000000
> [    1.965748] Call trace:
> [    1.968189]  nand_scan_with_ids+0x110c/0x1498
> [    1.972542]  fsl_ifc_nand_probe+0x474/0x6e0
> [    1.976723]  platform_drv_probe+0x5c/0xb0
> [    1.980729]  really_probe+0xf0/0x4d8
> [    1.984300]  driver_probe_device+0xfc/0x168
> [    1.988480]  device_driver_attach+0x7c/0x88
> [    1.992659]  __driver_attach+0xac/0x178
> [    1.996490]  bus_for_each_dev+0x78/0xc8
> [    2.000321]  driver_attach+0x2c/0x38
> [    2.003893]  bus_add_driver+0x14c/0x230
> [    2.007724]  driver_register+0x6c/0x128
> [    2.011555]  __platform_driver_register+0x50/0x60
> [    2.016258]  fsl_ifc_nand_driver_init+0x24/0x30
> [    2.020786]  do_one_initcall+0x4c/0x2d0
> [    2.024560] ata1: SATA link down (SStatus 0 SControl 300)
> [    2.024618]  kernel_init_freeable+0x214/0x280
> [    2.024624]  kernel_init+0x1c/0x120
> [    2.037849]  ret_from_fork+0x10/0x30
> [    2.041420] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
> 5.9.0-rc5-next-20200921 #1
> [    2.048815] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
> [    2.055166] Call trace:
> [    2.057606]  dump_backtrace+0x0/0x1e0
> [    2.061263]  show_stack+0x20/0x30
> [    2.064574]  dump_stack+0xf8/0x168
> [    2.067972]  __warn+0xfc/0x178
> [    2.071023]  report_bug+0xfc/0x170
> [    2.074419]  bug_handler+0x28/0x70
> [    2.077816]  call_break_hook+0x70/0x88
> [    2.080559] ata2: SATA link down (SStatus 0 SControl 300)
> [    2.081560]  brk_handler+0x24/0x68
> [    2.081566]  do_debug_exception+0xb8/0x130
> [    2.094442]  el1_sync_handler+0xd8/0x120
> [    2.098360]  el1_sync+0x80/0x100
> [    2.101583]  nand_scan_with_ids+0x110c/0x1498
> [    2.105935]  fsl_ifc_nand_probe+0x474/0x6e0
> [    2.110115]  platform_drv_probe+0x5c/0xb0
> [    2.114120]  really_probe+0xf0/0x4d8
> [    2.117691]  driver_probe_device+0xfc/0x168
> [    2.121871]  device_driver_attach+0x7c/0x88
> [    2.126050]  __driver_attach+0xac/0x178
> [    2.129882]  bus_for_each_dev+0x78/0xc8
> [    2.133714]  driver_attach+0x2c/0x38
> [    2.137284]  bus_add_driver+0x14c/0x230
> [    2.141116]  driver_register+0x6c/0x128
> [    2.144946]  __platform_driver_register+0x50/0x60
> [    2.149647]  fsl_ifc_nand_driver_init+0x24/0x30
> [    2.154173]  do_one_initcall+0x4c/0x2d0
> [    2.158004]  kernel_init_freeable+0x214/0x280
> [    2.162358]  kernel_init+0x1c/0x120
> [    2.165841]  ret_from_fork+0x10/0x30
> [    2.169415] ---[ end trace d051012f465b08eb ]---
> [    2.174073] fsl,ifc-nand: probe of 530000000.nand failed with error -22
> [    2.181882] spi-nor spi0.0: unrecognized JEDEC id bytes: 1c 38 78 e1 e3 c7
> [    2.189409] spi-nor spi1.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00
> [    2.196301] spi-nor: probe of spi1.0 failed with error -2
> [    2.203202] libphy: Fixed MDIO Bus: probed
> [    2.208607] thunder_xcv, ver 1.0
> [    2.211860] thunder_bgx, ver 1.0
> [    2.215114] nicpf, ver 1.0
> [    2.218785] hclge is initializing
> [    2.222141] hns3: Hisilicon Ethernet Network Driver for Hip08
> Family - version
> [    2.229371] hns3: Copyright (c) 2017 Huawei Corporation.
> [    2.234716] e1000: Intel(R) PRO/1000 Network Driver
> [    2.239598] e1000: Copyright (c) 1999-2006 Intel Corporation.
> [    2.245370] e1000e: Intel(R) PRO/1000 Network Driver
> [    2.250338] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
> [    2.256403] e1000e 0000:01:00.0: Adding to iommu group 0
> [    2.261733] arm-smmu 5000000.iommu: Cannot accommodate DMA offset
> for IOMMU page tables
> [    2.269752] Unable to handle kernel NULL pointer dereference at
> virtual address 0000000000000000
> [    2.278544] Mem abort info:
> [    2.281334]   ESR = 0x96000004
> [    2.284389]   EC = 0x25: DABT (current EL), IL = 32 bits
> [    2.289705]   SET = 0, FnV = 0
> [    2.292759]   EA = 0, S1PTW = 0
> [    2.295900] Data abort info:
> [    2.298781]   ISV = 0, ISS = 0x00000004
> [    2.302618]   CM = 0, WnR = 0
> [    2.305581] [0000000000000000] user address but active_mm is swapper
> [    2.311941] Internal error: Oops: 96000004 [#1] PREEMPT SMP
> [    2.317512] Modules linked in:
> [    2.320566] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W
>   5.9.0-rc5-next-20200921 #1
> [    2.329352] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
> [    2.335705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
> [    2.341715] pc : arm_smmu_flush_iotlb_all+0x28/0x90
> [    2.346590] lr : iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
> [    2.353203] sp : ffff80001005b9b0
> [    2.356511] x29: ffff80001005b9b0 x28: 0000000000000000
> [    2.361822] x27: ffffdc3792e904e0 x26: ffff80001005ba48
> [    2.367134] x25: ffff0082ee6b0000 x24: ffff0082ed88e0a8
> [    2.372445] x23: 00000000fffffff4 x22: 0000000000001000
> [    2.377755] x21: ffff80001005ba48 x20: 0000000000000000
> [    2.383066] x19: ffff0082cceeeb58 x18: 0000000000000010
> [    2.388377] x17: 0000000000000000 x16: 00000000833b5ff2
> [    2.393688] x15: ffff0082ee6b0480 x14: 203a756d6d6f692e
> [    2.398999] x13: 3030303030303520 x12: 61646f6d6d6f6363
> [    2.404311] x11: 6120746f6e6e6143 x10: 6f66207465736666
> [    2.409622] x9 : ffffdc3791d31078 x8 : ffff0082ed8ffd00
> [    2.414933] x7 : 0000000000000000 x6 : 000000000000003f
> [    2.420244] x5 : 0000000000000040 x4 : ffff80001005b970
> [    2.425554] x3 : 0000000000000000 x2 : 0000000000000000
> [    2.430865] x1 : ffffdc37927dd2f0 x0 : ffff0082cceeeb58
> [    2.436176] Call trace:
> [    2.438618]  arm_smmu_flush_iotlb_all+0x28/0x90
> [    2.443144]  iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
> [    2.449409]  iommu_probe_device+0x6c/0x120
> [    2.453501]  of_iommu_configure+0x134/0x218
> [    2.457683]  of_dma_configure_id+0x110/0x2e8
> [    2.461950]  pci_dma_configure+0x4c/0xd8
> [    2.465870]  really_probe+0xac/0x4d8
> [    2.469441]  driver_probe_device+0xfc/0x168
> [    2.473620]  device_driver_attach+0x7c/0x88
> [    2.477799]  __driver_attach+0xac/0x178
> [    2.481631]  bus_for_each_dev+0x78/0xc8
> [    2.485463]  driver_attach+0x2c/0x38
> [    2.489033]  bus_add_driver+0x14c/0x230
> [    2.492865]  driver_register+0x6c/0x128
> [    2.496696]  __pci_register_driver+0x4c/0x58
> [    2.500964]  e1000_init_module+0x44/0x50
> [    2.504882]  do_one_initcall+0x4c/0x2d0
> [    2.508714]  kernel_init_freeable+0x214/0x280
> [    2.513068]  kernel_init+0x1c/0x120
> [    2.516552]  ret_from_fork+0x10/0x30
> [    2.520124] Code: 910003fd a90153f3 aa0003f3 f85a8014 (f9400280)
> [    2.526224] ---[ end trace d051012f465b08ec ]---
> [    2.530848] Kernel panic - not syncing: Attempted to kill init!
> exitcode=0x0000000b
> [    2.538506] SMP: stopping secondary CPUs
> [    2.542431] Kernel Offset: 0x5c3781480000 from 0xffff800010000000
> [    2.548521] PHYS_OFFSET: 0xffffdb6ac0000000
> [    2.552700] CPU features: 0x0240022,21806008
> [    2.556965] Memory Limit: none
> 
> full test log,
> https://lavalab.nxp.com/scheduler/job/86650#L849
> 
> -- 
> Linaro LKFT
> https://lkft.linaro.org
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-09-24  9:03   ` Joerg Roedel
  (?)
@ 2020-09-24  9:08     ` Robin Murphy
  -1 siblings, 0 replies; 41+ messages in thread
From: Robin Murphy @ 2020-09-24  9:08 UTC (permalink / raw)
  To: Joerg Roedel, Naresh Kamboju, Will Deacon
  Cc: linux-mtd, open list, Linux-Next Mailing List, lkft-triage,
	open list:IOMMU DRIVERS, masonccyang, Richard Weinberger,
	Miquel Raynal, Suram Suram, Zhiqiang.Hou, Poonam Aggrwal, robh,
	Arnd Bergmann, Joerg Roedel

Hi Joerg,

On 2020-09-24 10:03, Joerg Roedel wrote:
> Adding Will and Robin.

This should be fixed by 
https://lore.kernel.org/linux-iommu/daedc9364a19dc07487e4d07b8768b1e5934abd4.1600700881.git.robin.murphy@arm.com/T/#u 
(already in linux-next).

Thanks,
Robin.

> On Mon, Sep 21, 2020 at 06:50:40PM +0530, Naresh Kamboju wrote:
>> arm64  Freescale Layerscape 2088A RDB Board boot failed with linux-next
>> 5.9.0-rc5-next-20200921 kernel tag version. The kernel warning and then
>> kernel panic happened.
>>
>> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
>>
>> metadata:
>>    git branch: master
>>    git repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
>>    git commit: b10b8ad862118bf42c28a98b0f067619aadcfb23
>>    git describe: next-20200921
>>    make_kernelversion: 5.9.0-rc5
>>    kernel-config:
>> https://builds.tuxbuild.com/GxPuM0SSznSoSYYG8deYpQ/kernel.config
>>
>>
>> crash log,
>>
>> [    1.811830] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
>> [    1.818202] nand: Micron MT29F16G08ABACAWP
>> [    1.822314] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
>> 4096, OOB size: 224
>> [    1.830078] ------------[ cut here ]------------
>> [    1.834703] Driver must set ecc.strength when using hardware ECC
>> [    1.840739] WARNING: CPU: 1 PID: 1 at
>> drivers/mtd/nand/raw/nand_base.c:5671 nand_scan_with_ids+0x110c/0x1498
>> [    1.850568] Modules linked in:
>> [    1.853621] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
>> 5.9.0-rc5-next-20200921 #1
>> [    1.861015] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
>> [    1.867368] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
>> [    1.873373] pc : nand_scan_with_ids+0x110c/0x1498
>> [    1.878073] lr : nand_scan_with_ids+0x110c/0x1498
>> [    1.882774] sp : ffff80001005ba50
>> [    1.886083] x29: ffff80001005ba50 x28: 0000000000000000
>> [    1.891395] x27: ffff0082edf98638 x26: 0000000000000048
>> [    1.896706] x25: 000000000000002c x24: ffff0082edf98578
>> [    1.902018] x23: 0000000000000001 x22: ffff0082ee6b0000
>> [    1.907329] x21: ffff0082edf98840 x20: 0000000000000000
>> [    1.912640] x19: ffff0082edf98080 x18: 0000000000000010
>> [    1.917951] x17: 0000000000000010 x16: 00000000833b5ff2
>> [    1.923262] x15: ffff0082ee6b0480 x14: ffffffffffffffff
>> [    1.928572] x13: ffff80009005b737 x12: ffff80001005b73f
>> [    1.933883] x11: ffff80001005ba50 x10: ffff80001005ba50
>> [    1.939194] x9 : ffffdc379157bfbc x8 : 657274732e636365
>> [    1.944504] x7 : 2074657320747375 x6 : ffffdc37937ba000
>> [    1.949815] x5 : ffffdc37937baa58 x4 : ffff80001005b840
>> [    1.955125] x3 : 0000000000000000 x2 : ffff0082ee6b0000
>> [    1.960436] x1 : 4732f0d38a403700 x0 : 0000000000000000
>> [    1.965748] Call trace:
>> [    1.968189]  nand_scan_with_ids+0x110c/0x1498
>> [    1.972542]  fsl_ifc_nand_probe+0x474/0x6e0
>> [    1.976723]  platform_drv_probe+0x5c/0xb0
>> [    1.980729]  really_probe+0xf0/0x4d8
>> [    1.984300]  driver_probe_device+0xfc/0x168
>> [    1.988480]  device_driver_attach+0x7c/0x88
>> [    1.992659]  __driver_attach+0xac/0x178
>> [    1.996490]  bus_for_each_dev+0x78/0xc8
>> [    2.000321]  driver_attach+0x2c/0x38
>> [    2.003893]  bus_add_driver+0x14c/0x230
>> [    2.007724]  driver_register+0x6c/0x128
>> [    2.011555]  __platform_driver_register+0x50/0x60
>> [    2.016258]  fsl_ifc_nand_driver_init+0x24/0x30
>> [    2.020786]  do_one_initcall+0x4c/0x2d0
>> [    2.024560] ata1: SATA link down (SStatus 0 SControl 300)
>> [    2.024618]  kernel_init_freeable+0x214/0x280
>> [    2.024624]  kernel_init+0x1c/0x120
>> [    2.037849]  ret_from_fork+0x10/0x30
>> [    2.041420] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
>> 5.9.0-rc5-next-20200921 #1
>> [    2.048815] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
>> [    2.055166] Call trace:
>> [    2.057606]  dump_backtrace+0x0/0x1e0
>> [    2.061263]  show_stack+0x20/0x30
>> [    2.064574]  dump_stack+0xf8/0x168
>> [    2.067972]  __warn+0xfc/0x178
>> [    2.071023]  report_bug+0xfc/0x170
>> [    2.074419]  bug_handler+0x28/0x70
>> [    2.077816]  call_break_hook+0x70/0x88
>> [    2.080559] ata2: SATA link down (SStatus 0 SControl 300)
>> [    2.081560]  brk_handler+0x24/0x68
>> [    2.081566]  do_debug_exception+0xb8/0x130
>> [    2.094442]  el1_sync_handler+0xd8/0x120
>> [    2.098360]  el1_sync+0x80/0x100
>> [    2.101583]  nand_scan_with_ids+0x110c/0x1498
>> [    2.105935]  fsl_ifc_nand_probe+0x474/0x6e0
>> [    2.110115]  platform_drv_probe+0x5c/0xb0
>> [    2.114120]  really_probe+0xf0/0x4d8
>> [    2.117691]  driver_probe_device+0xfc/0x168
>> [    2.121871]  device_driver_attach+0x7c/0x88
>> [    2.126050]  __driver_attach+0xac/0x178
>> [    2.129882]  bus_for_each_dev+0x78/0xc8
>> [    2.133714]  driver_attach+0x2c/0x38
>> [    2.137284]  bus_add_driver+0x14c/0x230
>> [    2.141116]  driver_register+0x6c/0x128
>> [    2.144946]  __platform_driver_register+0x50/0x60
>> [    2.149647]  fsl_ifc_nand_driver_init+0x24/0x30
>> [    2.154173]  do_one_initcall+0x4c/0x2d0
>> [    2.158004]  kernel_init_freeable+0x214/0x280
>> [    2.162358]  kernel_init+0x1c/0x120
>> [    2.165841]  ret_from_fork+0x10/0x30
>> [    2.169415] ---[ end trace d051012f465b08eb ]---
>> [    2.174073] fsl,ifc-nand: probe of 530000000.nand failed with error -22
>> [    2.181882] spi-nor spi0.0: unrecognized JEDEC id bytes: 1c 38 78 e1 e3 c7
>> [    2.189409] spi-nor spi1.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00
>> [    2.196301] spi-nor: probe of spi1.0 failed with error -2
>> [    2.203202] libphy: Fixed MDIO Bus: probed
>> [    2.208607] thunder_xcv, ver 1.0
>> [    2.211860] thunder_bgx, ver 1.0
>> [    2.215114] nicpf, ver 1.0
>> [    2.218785] hclge is initializing
>> [    2.222141] hns3: Hisilicon Ethernet Network Driver for Hip08
>> Family - version
>> [    2.229371] hns3: Copyright (c) 2017 Huawei Corporation.
>> [    2.234716] e1000: Intel(R) PRO/1000 Network Driver
>> [    2.239598] e1000: Copyright (c) 1999-2006 Intel Corporation.
>> [    2.245370] e1000e: Intel(R) PRO/1000 Network Driver
>> [    2.250338] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
>> [    2.256403] e1000e 0000:01:00.0: Adding to iommu group 0
>> [    2.261733] arm-smmu 5000000.iommu: Cannot accommodate DMA offset
>> for IOMMU page tables
>> [    2.269752] Unable to handle kernel NULL pointer dereference at
>> virtual address 0000000000000000
>> [    2.278544] Mem abort info:
>> [    2.281334]   ESR = 0x96000004
>> [    2.284389]   EC = 0x25: DABT (current EL), IL = 32 bits
>> [    2.289705]   SET = 0, FnV = 0
>> [    2.292759]   EA = 0, S1PTW = 0
>> [    2.295900] Data abort info:
>> [    2.298781]   ISV = 0, ISS = 0x00000004
>> [    2.302618]   CM = 0, WnR = 0
>> [    2.305581] [0000000000000000] user address but active_mm is swapper
>> [    2.311941] Internal error: Oops: 96000004 [#1] PREEMPT SMP
>> [    2.317512] Modules linked in:
>> [    2.320566] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W
>>    5.9.0-rc5-next-20200921 #1
>> [    2.329352] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
>> [    2.335705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
>> [    2.341715] pc : arm_smmu_flush_iotlb_all+0x28/0x90
>> [    2.346590] lr : iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
>> [    2.353203] sp : ffff80001005b9b0
>> [    2.356511] x29: ffff80001005b9b0 x28: 0000000000000000
>> [    2.361822] x27: ffffdc3792e904e0 x26: ffff80001005ba48
>> [    2.367134] x25: ffff0082ee6b0000 x24: ffff0082ed88e0a8
>> [    2.372445] x23: 00000000fffffff4 x22: 0000000000001000
>> [    2.377755] x21: ffff80001005ba48 x20: 0000000000000000
>> [    2.383066] x19: ffff0082cceeeb58 x18: 0000000000000010
>> [    2.388377] x17: 0000000000000000 x16: 00000000833b5ff2
>> [    2.393688] x15: ffff0082ee6b0480 x14: 203a756d6d6f692e
>> [    2.398999] x13: 3030303030303520 x12: 61646f6d6d6f6363
>> [    2.404311] x11: 6120746f6e6e6143 x10: 6f66207465736666
>> [    2.409622] x9 : ffffdc3791d31078 x8 : ffff0082ed8ffd00
>> [    2.414933] x7 : 0000000000000000 x6 : 000000000000003f
>> [    2.420244] x5 : 0000000000000040 x4 : ffff80001005b970
>> [    2.425554] x3 : 0000000000000000 x2 : 0000000000000000
>> [    2.430865] x1 : ffffdc37927dd2f0 x0 : ffff0082cceeeb58
>> [    2.436176] Call trace:
>> [    2.438618]  arm_smmu_flush_iotlb_all+0x28/0x90
>> [    2.443144]  iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
>> [    2.449409]  iommu_probe_device+0x6c/0x120
>> [    2.453501]  of_iommu_configure+0x134/0x218
>> [    2.457683]  of_dma_configure_id+0x110/0x2e8
>> [    2.461950]  pci_dma_configure+0x4c/0xd8
>> [    2.465870]  really_probe+0xac/0x4d8
>> [    2.469441]  driver_probe_device+0xfc/0x168
>> [    2.473620]  device_driver_attach+0x7c/0x88
>> [    2.477799]  __driver_attach+0xac/0x178
>> [    2.481631]  bus_for_each_dev+0x78/0xc8
>> [    2.485463]  driver_attach+0x2c/0x38
>> [    2.489033]  bus_add_driver+0x14c/0x230
>> [    2.492865]  driver_register+0x6c/0x128
>> [    2.496696]  __pci_register_driver+0x4c/0x58
>> [    2.500964]  e1000_init_module+0x44/0x50
>> [    2.504882]  do_one_initcall+0x4c/0x2d0
>> [    2.508714]  kernel_init_freeable+0x214/0x280
>> [    2.513068]  kernel_init+0x1c/0x120
>> [    2.516552]  ret_from_fork+0x10/0x30
>> [    2.520124] Code: 910003fd a90153f3 aa0003f3 f85a8014 (f9400280)
>> [    2.526224] ---[ end trace d051012f465b08ec ]---
>> [    2.530848] Kernel panic - not syncing: Attempted to kill init!
>> exitcode=0x0000000b
>> [    2.538506] SMP: stopping secondary CPUs
>> [    2.542431] Kernel Offset: 0x5c3781480000 from 0xffff800010000000
>> [    2.548521] PHYS_OFFSET: 0xffffdb6ac0000000
>> [    2.552700] CPU features: 0x0240022,21806008
>> [    2.556965] Memory Limit: none
>>
>> full test log,
>> https://lavalab.nxp.com/scheduler/job/86650#L849
>>
>> -- 
>> Linaro LKFT
>> https://lkft.linaro.org

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-09-24  9:08     ` Robin Murphy
  0 siblings, 0 replies; 41+ messages in thread
From: Robin Murphy @ 2020-09-24  9:08 UTC (permalink / raw)
  To: Joerg Roedel, Naresh Kamboju, Will Deacon
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Zhiqiang.Hou, open list, lkft-triage,
	open list:IOMMU DRIVERS, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang

Hi Joerg,

On 2020-09-24 10:03, Joerg Roedel wrote:
> Adding Will and Robin.

This should be fixed by 
https://lore.kernel.org/linux-iommu/daedc9364a19dc07487e4d07b8768b1e5934abd4.1600700881.git.robin.murphy@arm.com/T/#u 
(already in linux-next).

Thanks,
Robin.

> On Mon, Sep 21, 2020 at 06:50:40PM +0530, Naresh Kamboju wrote:
>> arm64  Freescale Layerscape 2088A RDB Board boot failed with linux-next
>> 5.9.0-rc5-next-20200921 kernel tag version. The kernel warning and then
>> kernel panic happened.
>>
>> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
>>
>> metadata:
>>    git branch: master
>>    git repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
>>    git commit: b10b8ad862118bf42c28a98b0f067619aadcfb23
>>    git describe: next-20200921
>>    make_kernelversion: 5.9.0-rc5
>>    kernel-config:
>> https://builds.tuxbuild.com/GxPuM0SSznSoSYYG8deYpQ/kernel.config
>>
>>
>> crash log,
>>
>> [    1.811830] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
>> [    1.818202] nand: Micron MT29F16G08ABACAWP
>> [    1.822314] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
>> 4096, OOB size: 224
>> [    1.830078] ------------[ cut here ]------------
>> [    1.834703] Driver must set ecc.strength when using hardware ECC
>> [    1.840739] WARNING: CPU: 1 PID: 1 at
>> drivers/mtd/nand/raw/nand_base.c:5671 nand_scan_with_ids+0x110c/0x1498
>> [    1.850568] Modules linked in:
>> [    1.853621] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
>> 5.9.0-rc5-next-20200921 #1
>> [    1.861015] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
>> [    1.867368] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
>> [    1.873373] pc : nand_scan_with_ids+0x110c/0x1498
>> [    1.878073] lr : nand_scan_with_ids+0x110c/0x1498
>> [    1.882774] sp : ffff80001005ba50
>> [    1.886083] x29: ffff80001005ba50 x28: 0000000000000000
>> [    1.891395] x27: ffff0082edf98638 x26: 0000000000000048
>> [    1.896706] x25: 000000000000002c x24: ffff0082edf98578
>> [    1.902018] x23: 0000000000000001 x22: ffff0082ee6b0000
>> [    1.907329] x21: ffff0082edf98840 x20: 0000000000000000
>> [    1.912640] x19: ffff0082edf98080 x18: 0000000000000010
>> [    1.917951] x17: 0000000000000010 x16: 00000000833b5ff2
>> [    1.923262] x15: ffff0082ee6b0480 x14: ffffffffffffffff
>> [    1.928572] x13: ffff80009005b737 x12: ffff80001005b73f
>> [    1.933883] x11: ffff80001005ba50 x10: ffff80001005ba50
>> [    1.939194] x9 : ffffdc379157bfbc x8 : 657274732e636365
>> [    1.944504] x7 : 2074657320747375 x6 : ffffdc37937ba000
>> [    1.949815] x5 : ffffdc37937baa58 x4 : ffff80001005b840
>> [    1.955125] x3 : 0000000000000000 x2 : ffff0082ee6b0000
>> [    1.960436] x1 : 4732f0d38a403700 x0 : 0000000000000000
>> [    1.965748] Call trace:
>> [    1.968189]  nand_scan_with_ids+0x110c/0x1498
>> [    1.972542]  fsl_ifc_nand_probe+0x474/0x6e0
>> [    1.976723]  platform_drv_probe+0x5c/0xb0
>> [    1.980729]  really_probe+0xf0/0x4d8
>> [    1.984300]  driver_probe_device+0xfc/0x168
>> [    1.988480]  device_driver_attach+0x7c/0x88
>> [    1.992659]  __driver_attach+0xac/0x178
>> [    1.996490]  bus_for_each_dev+0x78/0xc8
>> [    2.000321]  driver_attach+0x2c/0x38
>> [    2.003893]  bus_add_driver+0x14c/0x230
>> [    2.007724]  driver_register+0x6c/0x128
>> [    2.011555]  __platform_driver_register+0x50/0x60
>> [    2.016258]  fsl_ifc_nand_driver_init+0x24/0x30
>> [    2.020786]  do_one_initcall+0x4c/0x2d0
>> [    2.024560] ata1: SATA link down (SStatus 0 SControl 300)
>> [    2.024618]  kernel_init_freeable+0x214/0x280
>> [    2.024624]  kernel_init+0x1c/0x120
>> [    2.037849]  ret_from_fork+0x10/0x30
>> [    2.041420] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
>> 5.9.0-rc5-next-20200921 #1
>> [    2.048815] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
>> [    2.055166] Call trace:
>> [    2.057606]  dump_backtrace+0x0/0x1e0
>> [    2.061263]  show_stack+0x20/0x30
>> [    2.064574]  dump_stack+0xf8/0x168
>> [    2.067972]  __warn+0xfc/0x178
>> [    2.071023]  report_bug+0xfc/0x170
>> [    2.074419]  bug_handler+0x28/0x70
>> [    2.077816]  call_break_hook+0x70/0x88
>> [    2.080559] ata2: SATA link down (SStatus 0 SControl 300)
>> [    2.081560]  brk_handler+0x24/0x68
>> [    2.081566]  do_debug_exception+0xb8/0x130
>> [    2.094442]  el1_sync_handler+0xd8/0x120
>> [    2.098360]  el1_sync+0x80/0x100
>> [    2.101583]  nand_scan_with_ids+0x110c/0x1498
>> [    2.105935]  fsl_ifc_nand_probe+0x474/0x6e0
>> [    2.110115]  platform_drv_probe+0x5c/0xb0
>> [    2.114120]  really_probe+0xf0/0x4d8
>> [    2.117691]  driver_probe_device+0xfc/0x168
>> [    2.121871]  device_driver_attach+0x7c/0x88
>> [    2.126050]  __driver_attach+0xac/0x178
>> [    2.129882]  bus_for_each_dev+0x78/0xc8
>> [    2.133714]  driver_attach+0x2c/0x38
>> [    2.137284]  bus_add_driver+0x14c/0x230
>> [    2.141116]  driver_register+0x6c/0x128
>> [    2.144946]  __platform_driver_register+0x50/0x60
>> [    2.149647]  fsl_ifc_nand_driver_init+0x24/0x30
>> [    2.154173]  do_one_initcall+0x4c/0x2d0
>> [    2.158004]  kernel_init_freeable+0x214/0x280
>> [    2.162358]  kernel_init+0x1c/0x120
>> [    2.165841]  ret_from_fork+0x10/0x30
>> [    2.169415] ---[ end trace d051012f465b08eb ]---
>> [    2.174073] fsl,ifc-nand: probe of 530000000.nand failed with error -22
>> [    2.181882] spi-nor spi0.0: unrecognized JEDEC id bytes: 1c 38 78 e1 e3 c7
>> [    2.189409] spi-nor spi1.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00
>> [    2.196301] spi-nor: probe of spi1.0 failed with error -2
>> [    2.203202] libphy: Fixed MDIO Bus: probed
>> [    2.208607] thunder_xcv, ver 1.0
>> [    2.211860] thunder_bgx, ver 1.0
>> [    2.215114] nicpf, ver 1.0
>> [    2.218785] hclge is initializing
>> [    2.222141] hns3: Hisilicon Ethernet Network Driver for Hip08
>> Family - version
>> [    2.229371] hns3: Copyright (c) 2017 Huawei Corporation.
>> [    2.234716] e1000: Intel(R) PRO/1000 Network Driver
>> [    2.239598] e1000: Copyright (c) 1999-2006 Intel Corporation.
>> [    2.245370] e1000e: Intel(R) PRO/1000 Network Driver
>> [    2.250338] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
>> [    2.256403] e1000e 0000:01:00.0: Adding to iommu group 0
>> [    2.261733] arm-smmu 5000000.iommu: Cannot accommodate DMA offset
>> for IOMMU page tables
>> [    2.269752] Unable to handle kernel NULL pointer dereference at
>> virtual address 0000000000000000
>> [    2.278544] Mem abort info:
>> [    2.281334]   ESR = 0x96000004
>> [    2.284389]   EC = 0x25: DABT (current EL), IL = 32 bits
>> [    2.289705]   SET = 0, FnV = 0
>> [    2.292759]   EA = 0, S1PTW = 0
>> [    2.295900] Data abort info:
>> [    2.298781]   ISV = 0, ISS = 0x00000004
>> [    2.302618]   CM = 0, WnR = 0
>> [    2.305581] [0000000000000000] user address but active_mm is swapper
>> [    2.311941] Internal error: Oops: 96000004 [#1] PREEMPT SMP
>> [    2.317512] Modules linked in:
>> [    2.320566] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W
>>    5.9.0-rc5-next-20200921 #1
>> [    2.329352] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
>> [    2.335705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
>> [    2.341715] pc : arm_smmu_flush_iotlb_all+0x28/0x90
>> [    2.346590] lr : iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
>> [    2.353203] sp : ffff80001005b9b0
>> [    2.356511] x29: ffff80001005b9b0 x28: 0000000000000000
>> [    2.361822] x27: ffffdc3792e904e0 x26: ffff80001005ba48
>> [    2.367134] x25: ffff0082ee6b0000 x24: ffff0082ed88e0a8
>> [    2.372445] x23: 00000000fffffff4 x22: 0000000000001000
>> [    2.377755] x21: ffff80001005ba48 x20: 0000000000000000
>> [    2.383066] x19: ffff0082cceeeb58 x18: 0000000000000010
>> [    2.388377] x17: 0000000000000000 x16: 00000000833b5ff2
>> [    2.393688] x15: ffff0082ee6b0480 x14: 203a756d6d6f692e
>> [    2.398999] x13: 3030303030303520 x12: 61646f6d6d6f6363
>> [    2.404311] x11: 6120746f6e6e6143 x10: 6f66207465736666
>> [    2.409622] x9 : ffffdc3791d31078 x8 : ffff0082ed8ffd00
>> [    2.414933] x7 : 0000000000000000 x6 : 000000000000003f
>> [    2.420244] x5 : 0000000000000040 x4 : ffff80001005b970
>> [    2.425554] x3 : 0000000000000000 x2 : 0000000000000000
>> [    2.430865] x1 : ffffdc37927dd2f0 x0 : ffff0082cceeeb58
>> [    2.436176] Call trace:
>> [    2.438618]  arm_smmu_flush_iotlb_all+0x28/0x90
>> [    2.443144]  iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
>> [    2.449409]  iommu_probe_device+0x6c/0x120
>> [    2.453501]  of_iommu_configure+0x134/0x218
>> [    2.457683]  of_dma_configure_id+0x110/0x2e8
>> [    2.461950]  pci_dma_configure+0x4c/0xd8
>> [    2.465870]  really_probe+0xac/0x4d8
>> [    2.469441]  driver_probe_device+0xfc/0x168
>> [    2.473620]  device_driver_attach+0x7c/0x88
>> [    2.477799]  __driver_attach+0xac/0x178
>> [    2.481631]  bus_for_each_dev+0x78/0xc8
>> [    2.485463]  driver_attach+0x2c/0x38
>> [    2.489033]  bus_add_driver+0x14c/0x230
>> [    2.492865]  driver_register+0x6c/0x128
>> [    2.496696]  __pci_register_driver+0x4c/0x58
>> [    2.500964]  e1000_init_module+0x44/0x50
>> [    2.504882]  do_one_initcall+0x4c/0x2d0
>> [    2.508714]  kernel_init_freeable+0x214/0x280
>> [    2.513068]  kernel_init+0x1c/0x120
>> [    2.516552]  ret_from_fork+0x10/0x30
>> [    2.520124] Code: 910003fd a90153f3 aa0003f3 f85a8014 (f9400280)
>> [    2.526224] ---[ end trace d051012f465b08ec ]---
>> [    2.530848] Kernel panic - not syncing: Attempted to kill init!
>> exitcode=0x0000000b
>> [    2.538506] SMP: stopping secondary CPUs
>> [    2.542431] Kernel Offset: 0x5c3781480000 from 0xffff800010000000
>> [    2.548521] PHYS_OFFSET: 0xffffdb6ac0000000
>> [    2.552700] CPU features: 0x0240022,21806008
>> [    2.556965] Memory Limit: none
>>
>> full test log,
>> https://lavalab.nxp.com/scheduler/job/86650#L849
>>
>> -- 
>> Linaro LKFT
>> https://lkft.linaro.org

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-09-24  9:08     ` Robin Murphy
  0 siblings, 0 replies; 41+ messages in thread
From: Robin Murphy @ 2020-09-24  9:08 UTC (permalink / raw)
  To: Joerg Roedel, Naresh Kamboju, Will Deacon
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Zhiqiang.Hou, open list, lkft-triage,
	open list:IOMMU DRIVERS, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang

Hi Joerg,

On 2020-09-24 10:03, Joerg Roedel wrote:
> Adding Will and Robin.

This should be fixed by 
https://lore.kernel.org/linux-iommu/daedc9364a19dc07487e4d07b8768b1e5934abd4.1600700881.git.robin.murphy@arm.com/T/#u 
(already in linux-next).

Thanks,
Robin.

> On Mon, Sep 21, 2020 at 06:50:40PM +0530, Naresh Kamboju wrote:
>> arm64  Freescale Layerscape 2088A RDB Board boot failed with linux-next
>> 5.9.0-rc5-next-20200921 kernel tag version. The kernel warning and then
>> kernel panic happened.
>>
>> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
>>
>> metadata:
>>    git branch: master
>>    git repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
>>    git commit: b10b8ad862118bf42c28a98b0f067619aadcfb23
>>    git describe: next-20200921
>>    make_kernelversion: 5.9.0-rc5
>>    kernel-config:
>> https://builds.tuxbuild.com/GxPuM0SSznSoSYYG8deYpQ/kernel.config
>>
>>
>> crash log,
>>
>> [    1.811830] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
>> [    1.818202] nand: Micron MT29F16G08ABACAWP
>> [    1.822314] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
>> 4096, OOB size: 224
>> [    1.830078] ------------[ cut here ]------------
>> [    1.834703] Driver must set ecc.strength when using hardware ECC
>> [    1.840739] WARNING: CPU: 1 PID: 1 at
>> drivers/mtd/nand/raw/nand_base.c:5671 nand_scan_with_ids+0x110c/0x1498
>> [    1.850568] Modules linked in:
>> [    1.853621] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
>> 5.9.0-rc5-next-20200921 #1
>> [    1.861015] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
>> [    1.867368] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
>> [    1.873373] pc : nand_scan_with_ids+0x110c/0x1498
>> [    1.878073] lr : nand_scan_with_ids+0x110c/0x1498
>> [    1.882774] sp : ffff80001005ba50
>> [    1.886083] x29: ffff80001005ba50 x28: 0000000000000000
>> [    1.891395] x27: ffff0082edf98638 x26: 0000000000000048
>> [    1.896706] x25: 000000000000002c x24: ffff0082edf98578
>> [    1.902018] x23: 0000000000000001 x22: ffff0082ee6b0000
>> [    1.907329] x21: ffff0082edf98840 x20: 0000000000000000
>> [    1.912640] x19: ffff0082edf98080 x18: 0000000000000010
>> [    1.917951] x17: 0000000000000010 x16: 00000000833b5ff2
>> [    1.923262] x15: ffff0082ee6b0480 x14: ffffffffffffffff
>> [    1.928572] x13: ffff80009005b737 x12: ffff80001005b73f
>> [    1.933883] x11: ffff80001005ba50 x10: ffff80001005ba50
>> [    1.939194] x9 : ffffdc379157bfbc x8 : 657274732e636365
>> [    1.944504] x7 : 2074657320747375 x6 : ffffdc37937ba000
>> [    1.949815] x5 : ffffdc37937baa58 x4 : ffff80001005b840
>> [    1.955125] x3 : 0000000000000000 x2 : ffff0082ee6b0000
>> [    1.960436] x1 : 4732f0d38a403700 x0 : 0000000000000000
>> [    1.965748] Call trace:
>> [    1.968189]  nand_scan_with_ids+0x110c/0x1498
>> [    1.972542]  fsl_ifc_nand_probe+0x474/0x6e0
>> [    1.976723]  platform_drv_probe+0x5c/0xb0
>> [    1.980729]  really_probe+0xf0/0x4d8
>> [    1.984300]  driver_probe_device+0xfc/0x168
>> [    1.988480]  device_driver_attach+0x7c/0x88
>> [    1.992659]  __driver_attach+0xac/0x178
>> [    1.996490]  bus_for_each_dev+0x78/0xc8
>> [    2.000321]  driver_attach+0x2c/0x38
>> [    2.003893]  bus_add_driver+0x14c/0x230
>> [    2.007724]  driver_register+0x6c/0x128
>> [    2.011555]  __platform_driver_register+0x50/0x60
>> [    2.016258]  fsl_ifc_nand_driver_init+0x24/0x30
>> [    2.020786]  do_one_initcall+0x4c/0x2d0
>> [    2.024560] ata1: SATA link down (SStatus 0 SControl 300)
>> [    2.024618]  kernel_init_freeable+0x214/0x280
>> [    2.024624]  kernel_init+0x1c/0x120
>> [    2.037849]  ret_from_fork+0x10/0x30
>> [    2.041420] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
>> 5.9.0-rc5-next-20200921 #1
>> [    2.048815] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
>> [    2.055166] Call trace:
>> [    2.057606]  dump_backtrace+0x0/0x1e0
>> [    2.061263]  show_stack+0x20/0x30
>> [    2.064574]  dump_stack+0xf8/0x168
>> [    2.067972]  __warn+0xfc/0x178
>> [    2.071023]  report_bug+0xfc/0x170
>> [    2.074419]  bug_handler+0x28/0x70
>> [    2.077816]  call_break_hook+0x70/0x88
>> [    2.080559] ata2: SATA link down (SStatus 0 SControl 300)
>> [    2.081560]  brk_handler+0x24/0x68
>> [    2.081566]  do_debug_exception+0xb8/0x130
>> [    2.094442]  el1_sync_handler+0xd8/0x120
>> [    2.098360]  el1_sync+0x80/0x100
>> [    2.101583]  nand_scan_with_ids+0x110c/0x1498
>> [    2.105935]  fsl_ifc_nand_probe+0x474/0x6e0
>> [    2.110115]  platform_drv_probe+0x5c/0xb0
>> [    2.114120]  really_probe+0xf0/0x4d8
>> [    2.117691]  driver_probe_device+0xfc/0x168
>> [    2.121871]  device_driver_attach+0x7c/0x88
>> [    2.126050]  __driver_attach+0xac/0x178
>> [    2.129882]  bus_for_each_dev+0x78/0xc8
>> [    2.133714]  driver_attach+0x2c/0x38
>> [    2.137284]  bus_add_driver+0x14c/0x230
>> [    2.141116]  driver_register+0x6c/0x128
>> [    2.144946]  __platform_driver_register+0x50/0x60
>> [    2.149647]  fsl_ifc_nand_driver_init+0x24/0x30
>> [    2.154173]  do_one_initcall+0x4c/0x2d0
>> [    2.158004]  kernel_init_freeable+0x214/0x280
>> [    2.162358]  kernel_init+0x1c/0x120
>> [    2.165841]  ret_from_fork+0x10/0x30
>> [    2.169415] ---[ end trace d051012f465b08eb ]---
>> [    2.174073] fsl,ifc-nand: probe of 530000000.nand failed with error -22
>> [    2.181882] spi-nor spi0.0: unrecognized JEDEC id bytes: 1c 38 78 e1 e3 c7
>> [    2.189409] spi-nor spi1.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00
>> [    2.196301] spi-nor: probe of spi1.0 failed with error -2
>> [    2.203202] libphy: Fixed MDIO Bus: probed
>> [    2.208607] thunder_xcv, ver 1.0
>> [    2.211860] thunder_bgx, ver 1.0
>> [    2.215114] nicpf, ver 1.0
>> [    2.218785] hclge is initializing
>> [    2.222141] hns3: Hisilicon Ethernet Network Driver for Hip08
>> Family - version
>> [    2.229371] hns3: Copyright (c) 2017 Huawei Corporation.
>> [    2.234716] e1000: Intel(R) PRO/1000 Network Driver
>> [    2.239598] e1000: Copyright (c) 1999-2006 Intel Corporation.
>> [    2.245370] e1000e: Intel(R) PRO/1000 Network Driver
>> [    2.250338] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
>> [    2.256403] e1000e 0000:01:00.0: Adding to iommu group 0
>> [    2.261733] arm-smmu 5000000.iommu: Cannot accommodate DMA offset
>> for IOMMU page tables
>> [    2.269752] Unable to handle kernel NULL pointer dereference at
>> virtual address 0000000000000000
>> [    2.278544] Mem abort info:
>> [    2.281334]   ESR = 0x96000004
>> [    2.284389]   EC = 0x25: DABT (current EL), IL = 32 bits
>> [    2.289705]   SET = 0, FnV = 0
>> [    2.292759]   EA = 0, S1PTW = 0
>> [    2.295900] Data abort info:
>> [    2.298781]   ISV = 0, ISS = 0x00000004
>> [    2.302618]   CM = 0, WnR = 0
>> [    2.305581] [0000000000000000] user address but active_mm is swapper
>> [    2.311941] Internal error: Oops: 96000004 [#1] PREEMPT SMP
>> [    2.317512] Modules linked in:
>> [    2.320566] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W
>>    5.9.0-rc5-next-20200921 #1
>> [    2.329352] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
>> [    2.335705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
>> [    2.341715] pc : arm_smmu_flush_iotlb_all+0x28/0x90
>> [    2.346590] lr : iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
>> [    2.353203] sp : ffff80001005b9b0
>> [    2.356511] x29: ffff80001005b9b0 x28: 0000000000000000
>> [    2.361822] x27: ffffdc3792e904e0 x26: ffff80001005ba48
>> [    2.367134] x25: ffff0082ee6b0000 x24: ffff0082ed88e0a8
>> [    2.372445] x23: 00000000fffffff4 x22: 0000000000001000
>> [    2.377755] x21: ffff80001005ba48 x20: 0000000000000000
>> [    2.383066] x19: ffff0082cceeeb58 x18: 0000000000000010
>> [    2.388377] x17: 0000000000000000 x16: 00000000833b5ff2
>> [    2.393688] x15: ffff0082ee6b0480 x14: 203a756d6d6f692e
>> [    2.398999] x13: 3030303030303520 x12: 61646f6d6d6f6363
>> [    2.404311] x11: 6120746f6e6e6143 x10: 6f66207465736666
>> [    2.409622] x9 : ffffdc3791d31078 x8 : ffff0082ed8ffd00
>> [    2.414933] x7 : 0000000000000000 x6 : 000000000000003f
>> [    2.420244] x5 : 0000000000000040 x4 : ffff80001005b970
>> [    2.425554] x3 : 0000000000000000 x2 : 0000000000000000
>> [    2.430865] x1 : ffffdc37927dd2f0 x0 : ffff0082cceeeb58
>> [    2.436176] Call trace:
>> [    2.438618]  arm_smmu_flush_iotlb_all+0x28/0x90
>> [    2.443144]  iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
>> [    2.449409]  iommu_probe_device+0x6c/0x120
>> [    2.453501]  of_iommu_configure+0x134/0x218
>> [    2.457683]  of_dma_configure_id+0x110/0x2e8
>> [    2.461950]  pci_dma_configure+0x4c/0xd8
>> [    2.465870]  really_probe+0xac/0x4d8
>> [    2.469441]  driver_probe_device+0xfc/0x168
>> [    2.473620]  device_driver_attach+0x7c/0x88
>> [    2.477799]  __driver_attach+0xac/0x178
>> [    2.481631]  bus_for_each_dev+0x78/0xc8
>> [    2.485463]  driver_attach+0x2c/0x38
>> [    2.489033]  bus_add_driver+0x14c/0x230
>> [    2.492865]  driver_register+0x6c/0x128
>> [    2.496696]  __pci_register_driver+0x4c/0x58
>> [    2.500964]  e1000_init_module+0x44/0x50
>> [    2.504882]  do_one_initcall+0x4c/0x2d0
>> [    2.508714]  kernel_init_freeable+0x214/0x280
>> [    2.513068]  kernel_init+0x1c/0x120
>> [    2.516552]  ret_from_fork+0x10/0x30
>> [    2.520124] Code: 910003fd a90153f3 aa0003f3 f85a8014 (f9400280)
>> [    2.526224] ---[ end trace d051012f465b08ec ]---
>> [    2.530848] Kernel panic - not syncing: Attempted to kill init!
>> exitcode=0x0000000b
>> [    2.538506] SMP: stopping secondary CPUs
>> [    2.542431] Kernel Offset: 0x5c3781480000 from 0xffff800010000000
>> [    2.548521] PHYS_OFFSET: 0xffffdb6ac0000000
>> [    2.552700] CPU features: 0x0240022,21806008
>> [    2.556965] Memory Limit: none
>>
>> full test log,
>> https://lavalab.nxp.com/scheduler/job/86650#L849
>>
>> -- 
>> Linaro LKFT
>> https://lkft.linaro.org
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-09-24  9:08     ` Robin Murphy
  (?)
@ 2020-09-24  9:25       ` Joerg Roedel
  -1 siblings, 0 replies; 41+ messages in thread
From: Joerg Roedel @ 2020-09-24  9:25 UTC (permalink / raw)
  To: Robin Murphy
  Cc: Naresh Kamboju, Will Deacon, linux-mtd, open list,
	Linux-Next Mailing List, lkft-triage, open list:IOMMU DRIVERS,
	masonccyang, Richard Weinberger, Miquel Raynal, Suram Suram,
	Zhiqiang.Hou, Poonam Aggrwal, robh, Arnd Bergmann, Joerg Roedel

Hi Robin,

On Thu, Sep 24, 2020 at 10:08:46AM +0100, Robin Murphy wrote:
> This should be fixed by https://lore.kernel.org/linux-iommu/daedc9364a19dc07487e4d07b8768b1e5934abd4.1600700881.git.robin.murphy@arm.com/T/#u
> (already in linux-next).

Thanks! The question remains why this goes through the dma-mapping tree,
was it caused by a patch there?

Regards,

	Joerg

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-09-24  9:25       ` Joerg Roedel
  0 siblings, 0 replies; 41+ messages in thread
From: Joerg Roedel @ 2020-09-24  9:25 UTC (permalink / raw)
  To: Robin Murphy
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Naresh Kamboju, open list, lkft-triage,
	open list:IOMMU DRIVERS, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang, Will Deacon,
	Zhiqiang.Hou

Hi Robin,

On Thu, Sep 24, 2020 at 10:08:46AM +0100, Robin Murphy wrote:
> This should be fixed by https://lore.kernel.org/linux-iommu/daedc9364a19dc07487e4d07b8768b1e5934abd4.1600700881.git.robin.murphy@arm.com/T/#u
> (already in linux-next).

Thanks! The question remains why this goes through the dma-mapping tree,
was it caused by a patch there?

Regards,

	Joerg

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-09-24  9:25       ` Joerg Roedel
  0 siblings, 0 replies; 41+ messages in thread
From: Joerg Roedel @ 2020-09-24  9:25 UTC (permalink / raw)
  To: Robin Murphy
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Naresh Kamboju, open list, lkft-triage,
	open list:IOMMU DRIVERS, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang, Will Deacon,
	Zhiqiang.Hou

Hi Robin,

On Thu, Sep 24, 2020 at 10:08:46AM +0100, Robin Murphy wrote:
> This should be fixed by https://lore.kernel.org/linux-iommu/daedc9364a19dc07487e4d07b8768b1e5934abd4.1600700881.git.robin.murphy@arm.com/T/#u
> (already in linux-next).

Thanks! The question remains why this goes through the dma-mapping tree,
was it caused by a patch there?

Regards,

	Joerg
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-09-24  9:25       ` Joerg Roedel
  (?)
@ 2020-09-24  9:36         ` Robin Murphy
  -1 siblings, 0 replies; 41+ messages in thread
From: Robin Murphy @ 2020-09-24  9:36 UTC (permalink / raw)
  To: Joerg Roedel
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Naresh Kamboju, open list, lkft-triage,
	open list:IOMMU DRIVERS, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang, Will Deacon,
	Zhiqiang.Hou

On 2020-09-24 10:25, Joerg Roedel wrote:
> Hi Robin,
> 
> On Thu, Sep 24, 2020 at 10:08:46AM +0100, Robin Murphy wrote:
>> This should be fixed by https://lore.kernel.org/linux-iommu/daedc9364a19dc07487e4d07b8768b1e5934abd4.1600700881.git.robin.murphy@arm.com/T/#u
>> (already in linux-next).
> 
> Thanks! The question remains why this goes through the dma-mapping tree,
> was it caused by a patch there?

Yes, the issue was introduced by one of the changes in "dma-mapping: 
introduce DMA range map, supplanting dma_pfn_offset", so it only existed 
in the dma-mapping/for-next branch anyway.

Robin.

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-09-24  9:36         ` Robin Murphy
  0 siblings, 0 replies; 41+ messages in thread
From: Robin Murphy @ 2020-09-24  9:36 UTC (permalink / raw)
  To: Joerg Roedel
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Naresh Kamboju, open list, lkft-triage,
	open list:IOMMU DRIVERS, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang, Will Deacon,
	Zhiqiang.Hou

On 2020-09-24 10:25, Joerg Roedel wrote:
> Hi Robin,
> 
> On Thu, Sep 24, 2020 at 10:08:46AM +0100, Robin Murphy wrote:
>> This should be fixed by https://lore.kernel.org/linux-iommu/daedc9364a19dc07487e4d07b8768b1e5934abd4.1600700881.git.robin.murphy@arm.com/T/#u
>> (already in linux-next).
> 
> Thanks! The question remains why this goes through the dma-mapping tree,
> was it caused by a patch there?

Yes, the issue was introduced by one of the changes in "dma-mapping: 
introduce DMA range map, supplanting dma_pfn_offset", so it only existed 
in the dma-mapping/for-next branch anyway.

Robin.

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-09-24  9:36         ` Robin Murphy
  0 siblings, 0 replies; 41+ messages in thread
From: Robin Murphy @ 2020-09-24  9:36 UTC (permalink / raw)
  To: Joerg Roedel
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Naresh Kamboju, open list, lkft-triage,
	open list:IOMMU DRIVERS, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang, Will Deacon,
	Zhiqiang.Hou

On 2020-09-24 10:25, Joerg Roedel wrote:
> Hi Robin,
> 
> On Thu, Sep 24, 2020 at 10:08:46AM +0100, Robin Murphy wrote:
>> This should be fixed by https://lore.kernel.org/linux-iommu/daedc9364a19dc07487e4d07b8768b1e5934abd4.1600700881.git.robin.murphy@arm.com/T/#u
>> (already in linux-next).
> 
> Thanks! The question remains why this goes through the dma-mapping tree,
> was it caused by a patch there?

Yes, the issue was introduced by one of the changes in "dma-mapping: 
introduce DMA range map, supplanting dma_pfn_offset", so it only existed 
in the dma-mapping/for-next branch anyway.

Robin.
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-09-24  9:36         ` Robin Murphy
  (?)
@ 2020-09-24  9:56           ` Joerg Roedel
  -1 siblings, 0 replies; 41+ messages in thread
From: Joerg Roedel @ 2020-09-24  9:56 UTC (permalink / raw)
  To: Robin Murphy
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Naresh Kamboju, open list, lkft-triage,
	open list:IOMMU DRIVERS, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang, Will Deacon,
	Zhiqiang.Hou

On Thu, Sep 24, 2020 at 10:36:47AM +0100, Robin Murphy wrote:
> Yes, the issue was introduced by one of the changes in "dma-mapping:
> introduce DMA range map, supplanting dma_pfn_offset", so it only existed in
> the dma-mapping/for-next branch anyway.

Okay, alright then.


^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-09-24  9:56           ` Joerg Roedel
  0 siblings, 0 replies; 41+ messages in thread
From: Joerg Roedel @ 2020-09-24  9:56 UTC (permalink / raw)
  To: Robin Murphy
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Naresh Kamboju, open list, lkft-triage,
	open list:IOMMU DRIVERS, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang, Will Deacon,
	Zhiqiang.Hou

On Thu, Sep 24, 2020 at 10:36:47AM +0100, Robin Murphy wrote:
> Yes, the issue was introduced by one of the changes in "dma-mapping:
> introduce DMA range map, supplanting dma_pfn_offset", so it only existed in
> the dma-mapping/for-next branch anyway.

Okay, alright then.


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-09-24  9:56           ` Joerg Roedel
  0 siblings, 0 replies; 41+ messages in thread
From: Joerg Roedel @ 2020-09-24  9:56 UTC (permalink / raw)
  To: Robin Murphy
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Naresh Kamboju, open list, lkft-triage,
	open list:IOMMU DRIVERS, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang, Will Deacon,
	Zhiqiang.Hou

On Thu, Sep 24, 2020 at 10:36:47AM +0100, Robin Murphy wrote:
> Yes, the issue was introduced by one of the changes in "dma-mapping:
> introduce DMA range map, supplanting dma_pfn_offset", so it only existed in
> the dma-mapping/for-next branch anyway.

Okay, alright then.

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-09-24  9:56           ` Joerg Roedel
  (?)
@ 2020-10-09 13:54             ` Naresh Kamboju
  -1 siblings, 0 replies; 41+ messages in thread
From: Naresh Kamboju @ 2020-10-09 13:54 UTC (permalink / raw)
  To: Joerg Roedel
  Cc: Robin Murphy, Poonam Aggrwal, Rob Herring, Joerg Roedel,
	Arnd Bergmann, Richard Weinberger, open list, lkft-triage,
	open list:IOMMU DRIVERS, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang, Will Deacon, Z.Q. Hou

On Thu, 24 Sep 2020 at 15:26, Joerg Roedel <joro@8bytes.org> wrote:
>
> On Thu, Sep 24, 2020 at 10:36:47AM +0100, Robin Murphy wrote:
> > Yes, the issue was introduced by one of the changes in "dma-mapping:
> > introduce DMA range map, supplanting dma_pfn_offset", so it only existed in
> > the dma-mapping/for-next branch anyway.

FYI,
The reported problem still exists
>
> Okay, alright then.
>

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-10-09 13:54             ` Naresh Kamboju
  0 siblings, 0 replies; 41+ messages in thread
From: Naresh Kamboju @ 2020-10-09 13:54 UTC (permalink / raw)
  To: Joerg Roedel
  Cc: Poonam Aggrwal, Rob Herring, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Z.Q. Hou, Will Deacon, open list,
	lkft-triage, open list:IOMMU DRIVERS, Linux-Next Mailing List,
	linux-mtd, Miquel Raynal, Suram Suram, masonccyang, Robin Murphy

On Thu, 24 Sep 2020 at 15:26, Joerg Roedel <joro@8bytes.org> wrote:
>
> On Thu, Sep 24, 2020 at 10:36:47AM +0100, Robin Murphy wrote:
> > Yes, the issue was introduced by one of the changes in "dma-mapping:
> > introduce DMA range map, supplanting dma_pfn_offset", so it only existed in
> > the dma-mapping/for-next branch anyway.

FYI,
The reported problem still exists
>
> Okay, alright then.
>

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-10-09 13:54             ` Naresh Kamboju
  0 siblings, 0 replies; 41+ messages in thread
From: Naresh Kamboju @ 2020-10-09 13:54 UTC (permalink / raw)
  To: Joerg Roedel
  Cc: Poonam Aggrwal, Rob Herring, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Z.Q. Hou, Will Deacon, open list,
	lkft-triage, open list:IOMMU DRIVERS, Linux-Next Mailing List,
	linux-mtd, Miquel Raynal, Suram Suram, masonccyang, Robin Murphy

On Thu, 24 Sep 2020 at 15:26, Joerg Roedel <joro@8bytes.org> wrote:
>
> On Thu, Sep 24, 2020 at 10:36:47AM +0100, Robin Murphy wrote:
> > Yes, the issue was introduced by one of the changes in "dma-mapping:
> > introduce DMA range map, supplanting dma_pfn_offset", so it only existed in
> > the dma-mapping/for-next branch anyway.

FYI,
The reported problem still exists
>
> Okay, alright then.
>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-10-09 13:54             ` Naresh Kamboju
  (?)
@ 2020-10-09 13:56               ` Naresh Kamboju
  -1 siblings, 0 replies; 41+ messages in thread
From: Naresh Kamboju @ 2020-10-09 13:56 UTC (permalink / raw)
  To: Joerg Roedel
  Cc: Robin Murphy, Poonam Aggrwal, Rob Herring, Joerg Roedel,
	Arnd Bergmann, Richard Weinberger, open list, lkft-triage,
	open list:IOMMU DRIVERS, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang, Will Deacon, Z.Q. Hou

On Fri, 9 Oct 2020 at 19:24, Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
>
>
>
> On Thu, 24 Sep 2020 at 15:26, Joerg Roedel <joro@8bytes.org> wrote:
> >
> > On Thu, Sep 24, 2020 at 10:36:47AM +0100, Robin Murphy wrote:
> > > Yes, the issue was introduced by one of the changes in "dma-mapping:
> > > introduce DMA range map, supplanting dma_pfn_offset", so it only existed in
> > > the dma-mapping/for-next branch anyway.
>

FYI,
The reported problem still exists on 5.9.0-rc8-next-20201009.

[    1.843814] Driver must set ecc.strength when using hardware ECC
[    1.849847] WARNING: CPU: 4 PID: 1 at
drivers/mtd/nand/raw/nand_base.c:5687 nand_scan_with_ids+0x1450/0x1470
[    1.859676] Modules linked in:
[    1.862730] CPU: 4 PID: 1 Comm: swapper/0 Not tainted
5.9.0-rc8-next-20201009 #1
[    1.870125] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
[    1.876478] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
[    1.882483] pc : nand_scan_with_ids+0x1450/0x1470
[    1.887183] lr : nand_scan_with_ids+0x1450/0x1470

full test log,
https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20201009/testrun/3284876/suite/linux-log-parser/test/check-kernel-warning-92014/log

> >
> > Okay, alright then.
> >

- Naresh

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-10-09 13:56               ` Naresh Kamboju
  0 siblings, 0 replies; 41+ messages in thread
From: Naresh Kamboju @ 2020-10-09 13:56 UTC (permalink / raw)
  To: Joerg Roedel
  Cc: Poonam Aggrwal, Rob Herring, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Z.Q. Hou, Will Deacon, open list,
	lkft-triage, open list:IOMMU DRIVERS, Linux-Next Mailing List,
	linux-mtd, Miquel Raynal, Suram Suram, masonccyang, Robin Murphy

On Fri, 9 Oct 2020 at 19:24, Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
>
>
>
> On Thu, 24 Sep 2020 at 15:26, Joerg Roedel <joro@8bytes.org> wrote:
> >
> > On Thu, Sep 24, 2020 at 10:36:47AM +0100, Robin Murphy wrote:
> > > Yes, the issue was introduced by one of the changes in "dma-mapping:
> > > introduce DMA range map, supplanting dma_pfn_offset", so it only existed in
> > > the dma-mapping/for-next branch anyway.
>

FYI,
The reported problem still exists on 5.9.0-rc8-next-20201009.

[    1.843814] Driver must set ecc.strength when using hardware ECC
[    1.849847] WARNING: CPU: 4 PID: 1 at
drivers/mtd/nand/raw/nand_base.c:5687 nand_scan_with_ids+0x1450/0x1470
[    1.859676] Modules linked in:
[    1.862730] CPU: 4 PID: 1 Comm: swapper/0 Not tainted
5.9.0-rc8-next-20201009 #1
[    1.870125] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
[    1.876478] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
[    1.882483] pc : nand_scan_with_ids+0x1450/0x1470
[    1.887183] lr : nand_scan_with_ids+0x1450/0x1470

full test log,
https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20201009/testrun/3284876/suite/linux-log-parser/test/check-kernel-warning-92014/log

> >
> > Okay, alright then.
> >

- Naresh

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-10-09 13:56               ` Naresh Kamboju
  0 siblings, 0 replies; 41+ messages in thread
From: Naresh Kamboju @ 2020-10-09 13:56 UTC (permalink / raw)
  To: Joerg Roedel
  Cc: Poonam Aggrwal, Rob Herring, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Z.Q. Hou, Will Deacon, open list,
	lkft-triage, open list:IOMMU DRIVERS, Linux-Next Mailing List,
	linux-mtd, Miquel Raynal, Suram Suram, masonccyang, Robin Murphy

On Fri, 9 Oct 2020 at 19:24, Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
>
>
>
> On Thu, 24 Sep 2020 at 15:26, Joerg Roedel <joro@8bytes.org> wrote:
> >
> > On Thu, Sep 24, 2020 at 10:36:47AM +0100, Robin Murphy wrote:
> > > Yes, the issue was introduced by one of the changes in "dma-mapping:
> > > introduce DMA range map, supplanting dma_pfn_offset", so it only existed in
> > > the dma-mapping/for-next branch anyway.
>

FYI,
The reported problem still exists on 5.9.0-rc8-next-20201009.

[    1.843814] Driver must set ecc.strength when using hardware ECC
[    1.849847] WARNING: CPU: 4 PID: 1 at
drivers/mtd/nand/raw/nand_base.c:5687 nand_scan_with_ids+0x1450/0x1470
[    1.859676] Modules linked in:
[    1.862730] CPU: 4 PID: 1 Comm: swapper/0 Not tainted
5.9.0-rc8-next-20201009 #1
[    1.870125] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
[    1.876478] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
[    1.882483] pc : nand_scan_with_ids+0x1450/0x1470
[    1.887183] lr : nand_scan_with_ids+0x1450/0x1470

full test log,
https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20201009/testrun/3284876/suite/linux-log-parser/test/check-kernel-warning-92014/log

> >
> > Okay, alright then.
> >

- Naresh
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-10-09 13:56               ` Naresh Kamboju
@ 2020-10-10 18:53                 ` Stephen Rothwell
  -1 siblings, 0 replies; 41+ messages in thread
From: Stephen Rothwell @ 2020-10-10 18:53 UTC (permalink / raw)
  To: Naresh Kamboju
  Cc: Joerg Roedel, Robin Murphy, Poonam Aggrwal, Rob Herring,
	Joerg Roedel, Arnd Bergmann, Richard Weinberger, open list,
	lkft-triage, Linux-Next Mailing List, linux-mtd, Miquel Raynal,
	Suram Suram, masonccyang, Will Deacon, Z.Q. Hou,
	Christoph Hellwig, Jim Quinlan

[-- Attachment #1: Type: text/plain, Size: 1538 bytes --]

Hi Naresh,

Just adding Christoph and Jim to cc]

On Fri, 9 Oct 2020 19:26:24 +0530 Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
>
> On Fri, 9 Oct 2020 at 19:24, Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
> >
> >
> >
> > On Thu, 24 Sep 2020 at 15:26, Joerg Roedel <joro@8bytes.org> wrote:  
> > >
> > > On Thu, Sep 24, 2020 at 10:36:47AM +0100, Robin Murphy wrote:  
> > > > Yes, the issue was introduced by one of the changes in "dma-mapping:
> > > > introduce DMA range map, supplanting dma_pfn_offset", so it only existed in
> > > > the dma-mapping/for-next branch anyway.  
> >  
> 
> FYI,
> The reported problem still exists on 5.9.0-rc8-next-20201009.
> 
> [    1.843814] Driver must set ecc.strength when using hardware ECC
> [    1.849847] WARNING: CPU: 4 PID: 1 at
> drivers/mtd/nand/raw/nand_base.c:5687 nand_scan_with_ids+0x1450/0x1470
> [    1.859676] Modules linked in:
> [    1.862730] CPU: 4 PID: 1 Comm: swapper/0 Not tainted
> 5.9.0-rc8-next-20201009 #1
> [    1.870125] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
> [    1.876478] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
> [    1.882483] pc : nand_scan_with_ids+0x1450/0x1470
> [    1.887183] lr : nand_scan_with_ids+0x1450/0x1470
> 
> full test log,
> https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20201009/testrun/3284876/suite/linux-log-parser/test/check-kernel-warning-92014/log
> 
> > >
> > > Okay, alright then.
> > >  
> 
> - Naresh

-- 
Cheers,
Stephen Rothwell

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-10-10 18:53                 ` Stephen Rothwell
  0 siblings, 0 replies; 41+ messages in thread
From: Stephen Rothwell @ 2020-10-10 18:53 UTC (permalink / raw)
  To: Naresh Kamboju
  Cc: Poonam Aggrwal, Rob Herring, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Joerg Roedel, open list, lkft-triage,
	Christoph Hellwig, Will Deacon, Linux-Next Mailing List,
	linux-mtd, Jim Quinlan, Miquel Raynal, Suram Suram, masonccyang,
	Robin Murphy, Z.Q. Hou


[-- Attachment #1.1: Type: text/plain, Size: 1538 bytes --]

Hi Naresh,

Just adding Christoph and Jim to cc]

On Fri, 9 Oct 2020 19:26:24 +0530 Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
>
> On Fri, 9 Oct 2020 at 19:24, Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
> >
> >
> >
> > On Thu, 24 Sep 2020 at 15:26, Joerg Roedel <joro@8bytes.org> wrote:  
> > >
> > > On Thu, Sep 24, 2020 at 10:36:47AM +0100, Robin Murphy wrote:  
> > > > Yes, the issue was introduced by one of the changes in "dma-mapping:
> > > > introduce DMA range map, supplanting dma_pfn_offset", so it only existed in
> > > > the dma-mapping/for-next branch anyway.  
> >  
> 
> FYI,
> The reported problem still exists on 5.9.0-rc8-next-20201009.
> 
> [    1.843814] Driver must set ecc.strength when using hardware ECC
> [    1.849847] WARNING: CPU: 4 PID: 1 at
> drivers/mtd/nand/raw/nand_base.c:5687 nand_scan_with_ids+0x1450/0x1470
> [    1.859676] Modules linked in:
> [    1.862730] CPU: 4 PID: 1 Comm: swapper/0 Not tainted
> 5.9.0-rc8-next-20201009 #1
> [    1.870125] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
> [    1.876478] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
> [    1.882483] pc : nand_scan_with_ids+0x1450/0x1470
> [    1.887183] lr : nand_scan_with_ids+0x1450/0x1470
> 
> full test log,
> https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20201009/testrun/3284876/suite/linux-log-parser/test/check-kernel-warning-92014/log
> 
> > >
> > > Okay, alright then.
> > >  
> 
> - Naresh

-- 
Cheers,
Stephen Rothwell

[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 144 bytes --]

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-10-10 18:53                 ` Stephen Rothwell
@ 2020-10-11 20:36                   ` Jim Quinlan
  -1 siblings, 0 replies; 41+ messages in thread
From: Jim Quinlan @ 2020-10-11 20:36 UTC (permalink / raw)
  To: Stephen Rothwell
  Cc: Naresh Kamboju, Joerg Roedel, Robin Murphy, Poonam Aggrwal,
	Rob Herring, Joerg Roedel, Arnd Bergmann, Richard Weinberger,
	open list, lkft-triage, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang, Will Deacon, Z.Q. Hou,
	Christoph Hellwig, Florian Fainelli

[-- Attachment #1: Type: text/plain, Size: 2042 bytes --]

On Sat, Oct 10, 2020 at 2:53 PM Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>
> Hi Naresh,
>
> Just adding Christoph and Jim to cc]
>
> On Fri, 9 Oct 2020 19:26:24 +0530 Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
> >
> > On Fri, 9 Oct 2020 at 19:24, Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
> > >
> > >
> > >
> > > On Thu, 24 Sep 2020 at 15:26, Joerg Roedel <joro@8bytes.org> wrote:
> > > >
> > > > On Thu, Sep 24, 2020 at 10:36:47AM +0100, Robin Murphy wrote:
> > > > > Yes, the issue was introduced by one of the changes in "dma-mapping:
> > > > > introduce DMA range map, supplanting dma_pfn_offset", so it only existed in
> > > > > the dma-mapping/for-next branch anyway.
> > >
> >
> > FYI,
> > The reported problem still exists on 5.9.0-rc8-next-20201009.
> >
> > [    1.843814] Driver must set ecc.strength when using hardware ECC
> > [    1.849847] WARNING: CPU: 4 PID: 1 at
> > drivers/mtd/nand/raw/nand_base.c:5687 nand_scan_with_ids+0x1450/0x1470
> > [    1.859676] Modules linked in:
> > [    1.862730] CPU: 4 PID: 1 Comm: swapper/0 Not tainted
> > 5.9.0-rc8-next-20201009 #1
> > [    1.870125] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
> > [    1.876478] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
> > [    1.882483] pc : nand_scan_with_ids+0x1450/0x1470
> > [    1.887183] lr : nand_scan_with_ids+0x1450/0x1470

Hi,

I'm having a hard time coming up with a theory regarding  how a commit
concerning DMA offsets can affect the operation of a NAND driver that
appears not to use DMA or the dma-ranges property.  Does anyone else
have some ideas, or is there perhaps someone familiar with this test
configuration that I can correspond with to get to the bottom of the
warning?

Thanks,
Jim Quinlan
Broadcom STB

> >
> > full test log,
> > https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20201009/testrun/3284876/suite/linux-log-parser/test/check-kernel-warning-92014/log
> >
> > > >
> > > > Okay, alright then.
> > > >
> >
> > - Naresh
>
> --
> Cheers,
> Stephen Rothwell

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4167 bytes --]

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-10-11 20:36                   ` Jim Quinlan
  0 siblings, 0 replies; 41+ messages in thread
From: Jim Quinlan @ 2020-10-11 20:36 UTC (permalink / raw)
  To: Stephen Rothwell
  Cc: Poonam Aggrwal, Rob Herring, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Naresh Kamboju, Z.Q. Hou, open list,
	lkft-triage, Christoph Hellwig, Will Deacon,
	Linux-Next Mailing List, linux-mtd, Miquel Raynal,
	Florian Fainelli, Suram Suram, masonccyang, Robin Murphy,
	Joerg Roedel


[-- Attachment #1.1: Type: text/plain, Size: 2042 bytes --]

On Sat, Oct 10, 2020 at 2:53 PM Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>
> Hi Naresh,
>
> Just adding Christoph and Jim to cc]
>
> On Fri, 9 Oct 2020 19:26:24 +0530 Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
> >
> > On Fri, 9 Oct 2020 at 19:24, Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
> > >
> > >
> > >
> > > On Thu, 24 Sep 2020 at 15:26, Joerg Roedel <joro@8bytes.org> wrote:
> > > >
> > > > On Thu, Sep 24, 2020 at 10:36:47AM +0100, Robin Murphy wrote:
> > > > > Yes, the issue was introduced by one of the changes in "dma-mapping:
> > > > > introduce DMA range map, supplanting dma_pfn_offset", so it only existed in
> > > > > the dma-mapping/for-next branch anyway.
> > >
> >
> > FYI,
> > The reported problem still exists on 5.9.0-rc8-next-20201009.
> >
> > [    1.843814] Driver must set ecc.strength when using hardware ECC
> > [    1.849847] WARNING: CPU: 4 PID: 1 at
> > drivers/mtd/nand/raw/nand_base.c:5687 nand_scan_with_ids+0x1450/0x1470
> > [    1.859676] Modules linked in:
> > [    1.862730] CPU: 4 PID: 1 Comm: swapper/0 Not tainted
> > 5.9.0-rc8-next-20201009 #1
> > [    1.870125] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
> > [    1.876478] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
> > [    1.882483] pc : nand_scan_with_ids+0x1450/0x1470
> > [    1.887183] lr : nand_scan_with_ids+0x1450/0x1470

Hi,

I'm having a hard time coming up with a theory regarding  how a commit
concerning DMA offsets can affect the operation of a NAND driver that
appears not to use DMA or the dma-ranges property.  Does anyone else
have some ideas, or is there perhaps someone familiar with this test
configuration that I can correspond with to get to the bottom of the
warning?

Thanks,
Jim Quinlan
Broadcom STB

> >
> > full test log,
> > https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20201009/testrun/3284876/suite/linux-log-parser/test/check-kernel-warning-92014/log
> >
> > > >
> > > > Okay, alright then.
> > > >
> >
> > - Naresh
>
> --
> Cheers,
> Stephen Rothwell

[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4167 bytes --]

[-- Attachment #2: Type: text/plain, Size: 144 bytes --]

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-10-11 20:36                   ` Jim Quinlan
@ 2020-10-11 21:59                     ` Florian Fainelli
  -1 siblings, 0 replies; 41+ messages in thread
From: Florian Fainelli @ 2020-10-11 21:59 UTC (permalink / raw)
  To: Jim Quinlan, Stephen Rothwell, abhimanyu.saini, Ioana Ciornei,
	Fabio Estevam
  Cc: Naresh Kamboju, Joerg Roedel, Robin Murphy, Poonam Aggrwal,
	Rob Herring, Joerg Roedel, Arnd Bergmann, Richard Weinberger,
	open list, lkft-triage, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang, Will Deacon, Z.Q. Hou,
	Christoph Hellwig

+Abhimanyu, Ioana, Fabio

On 10/11/2020 1:36 PM, Jim Quinlan wrote:
> On Sat, Oct 10, 2020 at 2:53 PM Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>>
>> Hi Naresh,
>>
>> Just adding Christoph and Jim to cc]
>>
>> On Fri, 9 Oct 2020 19:26:24 +0530 Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
>>>
>>> On Fri, 9 Oct 2020 at 19:24, Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
>>>>
>>>>
>>>>
>>>> On Thu, 24 Sep 2020 at 15:26, Joerg Roedel <joro@8bytes.org> wrote:
>>>>>
>>>>> On Thu, Sep 24, 2020 at 10:36:47AM +0100, Robin Murphy wrote:
>>>>>> Yes, the issue was introduced by one of the changes in "dma-mapping:
>>>>>> introduce DMA range map, supplanting dma_pfn_offset", so it only existed in
>>>>>> the dma-mapping/for-next branch anyway.
>>>>
>>>
>>> FYI,
>>> The reported problem still exists on 5.9.0-rc8-next-20201009.
>>>
>>> [    1.843814] Driver must set ecc.strength when using hardware ECC
>>> [    1.849847] WARNING: CPU: 4 PID: 1 at
>>> drivers/mtd/nand/raw/nand_base.c:5687 nand_scan_with_ids+0x1450/0x1470
>>> [    1.859676] Modules linked in:
>>> [    1.862730] CPU: 4 PID: 1 Comm: swapper/0 Not tainted
>>> 5.9.0-rc8-next-20201009 #1
>>> [    1.870125] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
>>> [    1.876478] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
>>> [    1.882483] pc : nand_scan_with_ids+0x1450/0x1470
>>> [    1.887183] lr : nand_scan_with_ids+0x1450/0x1470
> 
> Hi,
> 
> I'm having a hard time coming up with a theory regarding  how a commit
> concerning DMA offsets can affect the operation of a NAND driver that
> appears not to use DMA or the dma-ranges property.  Does anyone else
> have some ideas, or is there perhaps someone familiar with this test
> configuration that I can correspond with to get to the bottom of the
> warning?

I believe you are given only a partial warning and just a glimpse of the 
thread here which is why understanding the connection to the dma ranges 
parsing is not clear. The start of the thread can be found here:

https://lore.kernel.org/lkml/CA+G9fYvuq58q+GsWnzni0sKSHbubuQz-UaK3TASX26V_a7yBVw@mail.gmail.com/

Robin indicated that the IOMMU probe failure was fixed with:

https://lore.kernel.org/linux-iommu/daedc9364a19dc07487e4d07b8768b1e5934abd4.1600700881.git.robin.murphy@arm.com/T/#u

which is confirmed with the new log from Naresh:

https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20201009/testrun/3284876/suite/linux-log-parser/test/check-kernel-warning-92014/log

however the NAND warning still remains. Someone else familiar with these 
NXP development boards should fix the DTS so as to provide the require 
ECC strength property.
-- 
Florian

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-10-11 21:59                     ` Florian Fainelli
  0 siblings, 0 replies; 41+ messages in thread
From: Florian Fainelli @ 2020-10-11 21:59 UTC (permalink / raw)
  To: Jim Quinlan, Stephen Rothwell, abhimanyu.saini, Ioana Ciornei,
	Fabio Estevam
  Cc: Poonam Aggrwal, Rob Herring, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Naresh Kamboju, Z.Q. Hou, open list,
	lkft-triage, Christoph Hellwig, Will Deacon,
	Linux-Next Mailing List, linux-mtd, Miquel Raynal, Suram Suram,
	masonccyang, Robin Murphy, Joerg Roedel

+Abhimanyu, Ioana, Fabio

On 10/11/2020 1:36 PM, Jim Quinlan wrote:
> On Sat, Oct 10, 2020 at 2:53 PM Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>>
>> Hi Naresh,
>>
>> Just adding Christoph and Jim to cc]
>>
>> On Fri, 9 Oct 2020 19:26:24 +0530 Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
>>>
>>> On Fri, 9 Oct 2020 at 19:24, Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
>>>>
>>>>
>>>>
>>>> On Thu, 24 Sep 2020 at 15:26, Joerg Roedel <joro@8bytes.org> wrote:
>>>>>
>>>>> On Thu, Sep 24, 2020 at 10:36:47AM +0100, Robin Murphy wrote:
>>>>>> Yes, the issue was introduced by one of the changes in "dma-mapping:
>>>>>> introduce DMA range map, supplanting dma_pfn_offset", so it only existed in
>>>>>> the dma-mapping/for-next branch anyway.
>>>>
>>>
>>> FYI,
>>> The reported problem still exists on 5.9.0-rc8-next-20201009.
>>>
>>> [    1.843814] Driver must set ecc.strength when using hardware ECC
>>> [    1.849847] WARNING: CPU: 4 PID: 1 at
>>> drivers/mtd/nand/raw/nand_base.c:5687 nand_scan_with_ids+0x1450/0x1470
>>> [    1.859676] Modules linked in:
>>> [    1.862730] CPU: 4 PID: 1 Comm: swapper/0 Not tainted
>>> 5.9.0-rc8-next-20201009 #1
>>> [    1.870125] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
>>> [    1.876478] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
>>> [    1.882483] pc : nand_scan_with_ids+0x1450/0x1470
>>> [    1.887183] lr : nand_scan_with_ids+0x1450/0x1470
> 
> Hi,
> 
> I'm having a hard time coming up with a theory regarding  how a commit
> concerning DMA offsets can affect the operation of a NAND driver that
> appears not to use DMA or the dma-ranges property.  Does anyone else
> have some ideas, or is there perhaps someone familiar with this test
> configuration that I can correspond with to get to the bottom of the
> warning?

I believe you are given only a partial warning and just a glimpse of the 
thread here which is why understanding the connection to the dma ranges 
parsing is not clear. The start of the thread can be found here:

https://lore.kernel.org/lkml/CA+G9fYvuq58q+GsWnzni0sKSHbubuQz-UaK3TASX26V_a7yBVw@mail.gmail.com/

Robin indicated that the IOMMU probe failure was fixed with:

https://lore.kernel.org/linux-iommu/daedc9364a19dc07487e4d07b8768b1e5934abd4.1600700881.git.robin.murphy@arm.com/T/#u

which is confirmed with the new log from Naresh:

https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20201009/testrun/3284876/suite/linux-log-parser/test/check-kernel-warning-92014/log

however the NAND warning still remains. Someone else familiar with these 
NXP development boards should fix the DTS so as to provide the require 
ECC strength property.
-- 
Florian

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-10-11 21:59                     ` Florian Fainelli
@ 2020-10-14 12:28                       ` Fabio Estevam
  -1 siblings, 0 replies; 41+ messages in thread
From: Fabio Estevam @ 2020-10-14 12:28 UTC (permalink / raw)
  To: Florian Fainelli
  Cc: Jim Quinlan, Stephen Rothwell, abhimanyu.saini, Ioana Ciornei,
	Naresh Kamboju, Joerg Roedel, Robin Murphy, Poonam Aggrwal,
	Rob Herring, Joerg Roedel, Arnd Bergmann, Richard Weinberger,
	open list, lkft-triage, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang, Will Deacon, Z.Q. Hou,
	Christoph Hellwig

Hi Florian,

On Sun, Oct 11, 2020 at 6:59 PM Florian Fainelli <f.fainelli@gmail.com> wrote:

> however the NAND warning still remains. Someone else familiar with these
> NXP development boards should fix the DTS so as to provide the require
> ECC strength property.

The ECC NAND warning looks like a regression.

I had originally reported it for an imx27 board and now I also pointed
out that it also affects Layerscape:
https://lore.kernel.org/linux-mtd/20201013193652.0c535c7c@xps13/T/#m09fad7eacdf86aee0834bbd8863d6d5ee2e69f8c

Thanks,

Fabio Estevam

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-10-14 12:28                       ` Fabio Estevam
  0 siblings, 0 replies; 41+ messages in thread
From: Fabio Estevam @ 2020-10-14 12:28 UTC (permalink / raw)
  To: Florian Fainelli
  Cc: Ioana Ciornei, lkft-triage, linux-mtd, Miquel Raynal,
	Will Deacon, Christoph Hellwig, abhimanyu.saini,
	Stephen Rothwell, Richard Weinberger, Naresh Kamboju,
	Linux-Next Mailing List, masonccyang, Poonam Aggrwal,
	Joerg Roedel, Arnd Bergmann, Rob Herring, Z.Q. Hou, open list,
	Jim Quinlan, Suram Suram, Robin Murphy, Joerg Roedel

Hi Florian,

On Sun, Oct 11, 2020 at 6:59 PM Florian Fainelli <f.fainelli@gmail.com> wrote:

> however the NAND warning still remains. Someone else familiar with these
> NXP development boards should fix the DTS so as to provide the require
> ECC strength property.

The ECC NAND warning looks like a regression.

I had originally reported it for an imx27 board and now I also pointed
out that it also affects Layerscape:
https://lore.kernel.org/linux-mtd/20201013193652.0c535c7c@xps13/T/#m09fad7eacdf86aee0834bbd8863d6d5ee2e69f8c

Thanks,

Fabio Estevam

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-10-14 12:28                       ` Fabio Estevam
@ 2020-10-14 12:58                         ` Miquel Raynal
  -1 siblings, 0 replies; 41+ messages in thread
From: Miquel Raynal @ 2020-10-14 12:58 UTC (permalink / raw)
  To: Fabio Estevam
  Cc: Florian Fainelli, Jim Quinlan, Stephen Rothwell, abhimanyu.saini,
	Ioana Ciornei, Naresh Kamboju, Joerg Roedel, Robin Murphy,
	Poonam Aggrwal, Rob Herring, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, open list, lkft-triage,
	Linux-Next Mailing List, linux-mtd, Suram Suram, masonccyang,
	Will Deacon, Z.Q. Hou, Christoph Hellwig

Hello,

Fabio Estevam <festevam@gmail.com> wrote on Wed, 14 Oct 2020 09:28:49
-0300:

> Hi Florian,
> 
> On Sun, Oct 11, 2020 at 6:59 PM Florian Fainelli <f.fainelli@gmail.com> wrote:
> 
> > however the NAND warning still remains. Someone else familiar with these
> > NXP development boards should fix the DTS so as to provide the require
> > ECC strength property.  
> 
> The ECC NAND warning looks like a regression.
> 
> I had originally reported it for an imx27 board and now I also pointed
> out that it also affects Layerscape:
> https://lore.kernel.org/linux-mtd/20201013193652.0c535c7c@xps13/T/#m09fad7eacdf86aee0834bbd8863d6d5ee2e69f8c

I think this thread initially reported two distinct defects, one has
been solved, the second one is in my hands but I couldn't find the root
cause yet. I tried to reproduce, without luck, with another NAND
controller. If someone has an imx based board and a NAND controller on
it, I would appreciate some help.

Thanks,
Miquèl

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-10-14 12:58                         ` Miquel Raynal
  0 siblings, 0 replies; 41+ messages in thread
From: Miquel Raynal @ 2020-10-14 12:58 UTC (permalink / raw)
  To: Fabio Estevam
  Cc: lkft-triage, linux-mtd, Ioana Ciornei, Will Deacon,
	Christoph Hellwig, abhimanyu.saini, Stephen Rothwell,
	Florian Fainelli, Richard Weinberger, Naresh Kamboju,
	Linux-Next Mailing List, masonccyang, Poonam Aggrwal,
	Joerg Roedel, Arnd Bergmann, Rob Herring, Z.Q. Hou, open list,
	Jim Quinlan, Suram Suram, Robin Murphy, Joerg Roedel

Hello,

Fabio Estevam <festevam@gmail.com> wrote on Wed, 14 Oct 2020 09:28:49
-0300:

> Hi Florian,
> 
> On Sun, Oct 11, 2020 at 6:59 PM Florian Fainelli <f.fainelli@gmail.com> wrote:
> 
> > however the NAND warning still remains. Someone else familiar with these
> > NXP development boards should fix the DTS so as to provide the require
> > ECC strength property.  
> 
> The ECC NAND warning looks like a regression.
> 
> I had originally reported it for an imx27 board and now I also pointed
> out that it also affects Layerscape:
> https://lore.kernel.org/linux-mtd/20201013193652.0c535c7c@xps13/T/#m09fad7eacdf86aee0834bbd8863d6d5ee2e69f8c

I think this thread initially reported two distinct defects, one has
been solved, the second one is in my hands but I couldn't find the root
cause yet. I tried to reproduce, without luck, with another NAND
controller. If someone has an imx based board and a NAND controller on
it, I would appreciate some help.

Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-10-10 18:53                 ` Stephen Rothwell
@ 2020-10-15  7:48                   ` Christoph Hellwig
  -1 siblings, 0 replies; 41+ messages in thread
From: Christoph Hellwig @ 2020-10-15  7:48 UTC (permalink / raw)
  To: Stephen Rothwell
  Cc: Naresh Kamboju, Joerg Roedel, Robin Murphy, Poonam Aggrwal,
	Rob Herring, Joerg Roedel, Arnd Bergmann, Richard Weinberger,
	open list, lkft-triage, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang, Will Deacon, Z.Q. Hou,
	Christoph Hellwig, Jim Quinlan

On Sun, Oct 11, 2020 at 05:53:37AM +1100, Stephen Rothwell wrote:
> Hi Naresh,
> 
> Just adding Christoph and Jim to cc]

Well, a Cc doesn't help on its own.  Can you send an actual bug
report including the setup, warnings and error messages, a bisection
result and the usual suspects?

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-10-15  7:48                   ` Christoph Hellwig
  0 siblings, 0 replies; 41+ messages in thread
From: Christoph Hellwig @ 2020-10-15  7:48 UTC (permalink / raw)
  To: Stephen Rothwell
  Cc: Poonam Aggrwal, Rob Herring, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Naresh Kamboju, Z.Q. Hou, open list,
	lkft-triage, Christoph Hellwig, Will Deacon,
	Linux-Next Mailing List, linux-mtd, Jim Quinlan, Miquel Raynal,
	Suram Suram, masonccyang, Robin Murphy, Joerg Roedel

On Sun, Oct 11, 2020 at 05:53:37AM +1100, Stephen Rothwell wrote:
> Hi Naresh,
> 
> Just adding Christoph and Jim to cc]

Well, a Cc doesn't help on its own.  Can you send an actual bug
report including the setup, warnings and error messages, a bisection
result and the usual suspects?

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-10-15  7:48                   ` Christoph Hellwig
@ 2020-10-15 18:17                     ` Florian Fainelli
  -1 siblings, 0 replies; 41+ messages in thread
From: Florian Fainelli @ 2020-10-15 18:17 UTC (permalink / raw)
  To: Christoph Hellwig, Stephen Rothwell
  Cc: Poonam Aggrwal, Rob Herring, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Naresh Kamboju, Z.Q. Hou, open list,
	lkft-triage, Will Deacon, Linux-Next Mailing List, linux-mtd,
	Jim Quinlan, Miquel Raynal, Suram Suram, masonccyang,
	Robin Murphy, Joerg Roedel

On 10/15/20 12:48 AM, Christoph Hellwig wrote:
> On Sun, Oct 11, 2020 at 05:53:37AM +1100, Stephen Rothwell wrote:
>> Hi Naresh,
>>
>> Just adding Christoph and Jim to cc]
> 
> Well, a Cc doesn't help on its own.  Can you send an actual bug
> report including the setup, warnings and error messages, a bisection
> result and the usual suspects?

I don't believe there is a DMA regression for you to look at, this was
solved a long time ago thanks to Robin, here is the beginning of the thread:

https://lore.kernel.org/lkml/CA+G9fYvuq58q+GsWnzni0sKSHbubuQz-UaK3TASX26V_a7yBVw@mail.gmail.com/
-- 
Florian

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-10-15 18:17                     ` Florian Fainelli
  0 siblings, 0 replies; 41+ messages in thread
From: Florian Fainelli @ 2020-10-15 18:17 UTC (permalink / raw)
  To: Christoph Hellwig, Stephen Rothwell
  Cc: Poonam Aggrwal, Rob Herring, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Naresh Kamboju, Joerg Roedel, open list,
	lkft-triage, Linux-Next Mailing List, linux-mtd, Jim Quinlan,
	Miquel Raynal, Suram Suram, masonccyang, Will Deacon, Z.Q. Hou,
	Robin Murphy

On 10/15/20 12:48 AM, Christoph Hellwig wrote:
> On Sun, Oct 11, 2020 at 05:53:37AM +1100, Stephen Rothwell wrote:
>> Hi Naresh,
>>
>> Just adding Christoph and Jim to cc]
> 
> Well, a Cc doesn't help on its own.  Can you send an actual bug
> report including the setup, warnings and error messages, a bisection
> result and the usual suspects?

I don't believe there is a DMA regression for you to look at, this was
solved a long time ago thanks to Robin, here is the beginning of the thread:

https://lore.kernel.org/lkml/CA+G9fYvuq58q+GsWnzni0sKSHbubuQz-UaK3TASX26V_a7yBVw@mail.gmail.com/
-- 
Florian

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 41+ messages in thread

end of thread, other threads:[~2020-10-15 18:18 UTC | newest]

Thread overview: 41+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-21 13:20 arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables Naresh Kamboju
2020-09-21 13:20 ` Naresh Kamboju
2020-09-21 13:20 ` Naresh Kamboju
2020-09-21 14:51 ` Robin Murphy
2020-09-21 14:51   ` Robin Murphy
2020-09-21 14:51   ` Robin Murphy
2020-09-24  9:03 ` Joerg Roedel
2020-09-24  9:03   ` Joerg Roedel
2020-09-24  9:03   ` Joerg Roedel
2020-09-24  9:08   ` Robin Murphy
2020-09-24  9:08     ` Robin Murphy
2020-09-24  9:08     ` Robin Murphy
2020-09-24  9:25     ` Joerg Roedel
2020-09-24  9:25       ` Joerg Roedel
2020-09-24  9:25       ` Joerg Roedel
2020-09-24  9:36       ` Robin Murphy
2020-09-24  9:36         ` Robin Murphy
2020-09-24  9:36         ` Robin Murphy
2020-09-24  9:56         ` Joerg Roedel
2020-09-24  9:56           ` Joerg Roedel
2020-09-24  9:56           ` Joerg Roedel
2020-10-09 13:54           ` Naresh Kamboju
2020-10-09 13:54             ` Naresh Kamboju
2020-10-09 13:54             ` Naresh Kamboju
2020-10-09 13:56             ` Naresh Kamboju
2020-10-09 13:56               ` Naresh Kamboju
2020-10-09 13:56               ` Naresh Kamboju
2020-10-10 18:53               ` Stephen Rothwell
2020-10-10 18:53                 ` Stephen Rothwell
2020-10-11 20:36                 ` Jim Quinlan
2020-10-11 20:36                   ` Jim Quinlan
2020-10-11 21:59                   ` Florian Fainelli
2020-10-11 21:59                     ` Florian Fainelli
2020-10-14 12:28                     ` Fabio Estevam
2020-10-14 12:28                       ` Fabio Estevam
2020-10-14 12:58                       ` Miquel Raynal
2020-10-14 12:58                         ` Miquel Raynal
2020-10-15  7:48                 ` Christoph Hellwig
2020-10-15  7:48                   ` Christoph Hellwig
2020-10-15 18:17                   ` Florian Fainelli
2020-10-15 18:17                     ` Florian Fainelli

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.