* [next] arm64: juno-r2: BUG: KASAN: use-after-free in __pci_enable_msi_range
@ 2021-12-20 9:54 ` Naresh Kamboju
0 siblings, 0 replies; 2+ messages in thread
From: Naresh Kamboju @ 2021-12-20 9:54 UTC (permalink / raw)
To: PCI, open list, Linux ARM, Linux-Next Mailing List
Cc: Bjorn Helgaas, Jason Gunthorpe, Thomas Gleixner,
Greg Kroah-Hartman, Juergen Gross, Jason Gunthorpe, regressions,
lkft-triage
While booting Linux next 20211215 and next 20211217 on arm64 juno-r2 device
the following kernel crash reported and several LTP syscalls test cases,
Only noticed on juno-r2 whereas dragonboard-410c and hikey-hi6220 tests pass.
Test case failure:
add_key05.c:207: TBROK: Failed to open FILE
'/proc/sys/kernel/keys/gc_delay' for writing: ENOENT (2)
tst_taint.c:15: TBROK: Failed to open FILE '/proc/sys/kernel/tainted'
for reading: ENOENT (2)
tst_pid.c:43: TBROK: Failed to open FILE '/proc/sys/kernel/pid_max'
for reading: ENOENT (2)
arm64 juno-r2 kernel crash log while booting.
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000100 [0x410fd033]
[ 0.000000] Linux version 5.16.0-rc5-next-20211217
(tuxmake@tuxmake) (aarch64-linux-gnu-gcc (Debian 11.2.0-9) 11.2.0, GNU
ld (GNU Binutils for Debian) 2.37) #1 SMP PREEMPT @1639749733
[ 0.000000] Machine model: ARM Juno development board (r2)
<trim>
[ 2.191774] hw perfevents: enabled with armv8_cortex_a72 PMU
driver, 7 counters available
[ 2.201822] sysctl duplicate entry: /kernel//perf_user_access
[ 2.207718] CPU: 2 PID: 1 Comm: swapper/0 Not tainted
5.16.0-rc5-next-20211217 #1
[ 2.215235] Hardware name: ARM Juno development board (r2) (DT)
[ 2.221175] Call trace:
[ 2.223629] dump_backtrace+0x228/0x240
[ 2.227493] show_stack+0x24/0x80
[ 2.230827] dump_stack_lvl+0x8c/0xb8
[ 2.234515] dump_stack+0x1c/0x38
[ 2.237851] __register_sysctl_table+0x520/0xa30
[ 2.242499] register_sysctl+0x2c/0x40
[ 2.246273] armv8_a53_pmu_init+0x21c/0x264
[ 2.250481] arm_pmu_device_probe+0x254/0x6e0
[ 2.254867] armv8_pmu_device_probe+0x28/0x34
[ 2.259248] platform_probe+0x98/0x120
[ 2.263018] really_probe+0x11c/0x684
[ 2.266705] __driver_probe_device+0x194/0x22c
[ 2.271177] driver_probe_device+0x68/0x150
[ 2.275386] __driver_attach+0x124/0x260
[ 2.279335] bus_for_each_dev+0xf0/0x160
[ 2.283281] driver_attach+0x40/0x50
[ 2.286880] bus_add_driver+0x20c/0x300
[ 2.290739] driver_register+0xf8/0x21c
[ 2.294601] __platform_driver_register+0x50/0x60
[ 2.299328] armv8_pmu_driver_init+0x40/0x60
[ 2.303623] do_one_initcall+0xa8/0x3ec
[ 2.307480] kernel_init_freeable+0x300/0x388
[ 2.311864] kernel_init+0x30/0x15c
[ 2.315374] ret_from_fork+0x10/0x20
[ 2.320928] hw perfevents: enabled with armv8_cortex_a53 PMU
driver, 7 counters available
[ 2.329472] kvm [1]: IPA Size Limit: 40 bits
[ 2.342423] kvm [1]: vgic interrupt IRQ9
[ 2.347393] kvm [1]: Hyp mode initialized successfully
[ 2.362544] Initialise system trusted keyrings
[ 2.368278] workingset: timestamp_bits=42 max_order=21 bucket_order=0
[ 2.428029] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.439945] NFS: Registering the id_resolver key type
[ 2.445176] Key type id_resolver registered
[ 2.449411] Key type id_legacy registered
[ 2.454010] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 2.460773] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver
Registering...
[ 2.469105] 9p: Installing v9fs 9p2000 file system support
[ 2.515228] NET: Registered PF_ALG protocol family
[ 2.520108] Key type asymmetric registered
[ 2.524277] Asymmetric key parser 'x509' registered
[ 2.529923] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 244)
[ 2.537382] io scheduler mq-deadline registered
[ 2.541964] io scheduler kyber registered
[ 2.631942] pl061_gpio 1c1d0000.gpio: PL061 GPIO chip registered
[ 2.653688] pci-host-generic 40000000.pcie: host bridge
/pcie@40000000 ranges:
[ 2.661162] pci-host-generic 40000000.pcie: IO
0x005f800000..0x005fffffff -> 0x0000000000
[ 2.670092] pci-host-generic 40000000.pcie: MEM
0x0050000000..0x0057ffffff -> 0x0050000000
[ 2.678953] pci-host-generic 40000000.pcie: MEM
0x4000000000..0x40ffffffff -> 0x4000000000
[ 2.687901] pci-host-generic 40000000.pcie: IB MEM
0x002c1c0000..0x002c1fffff -> 0x002c1c0000
[ 2.696819] pci-host-generic 40000000.pcie: IB MEM
0x0080000000..0x00ffffffff -> 0x0080000000
[ 2.705670] pci-host-generic 40000000.pcie: IB MEM
0x0800000000..0x09ffffffff -> 0x0800000000
[ 2.793723] pci-host-generic 40000000.pcie: ECAM at [mem
0x40000000-0x4fffffff] for [bus 00-ff]
[ 2.803466] pci-host-generic 40000000.pcie: PCI host bridge to bus 0000:00
[ 2.810427] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.816008] pci_bus 0000:00: root bus resource [io 0x0000-0x7fffff]
[ 2.822435] pci_bus 0000:00: root bus resource [mem 0x50000000-0x57ffffff]
[ 2.829384] pci_bus 0000:00: root bus resource [mem
0x4000000000-0x40ffffffff pref]
[ 2.837252] pci 0000:00:00.0: [1556:1100] type 01 class 0x060400
[ 2.843508] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00003fff
64bit pref]
[ 2.851351] pci 0000:00:00.0: supports D1 D2
[ 2.855676] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.868561] pci 0000:00:00.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 2.877468] pci 0000:01:00.0: [111d:8090] type 01 class 0x060400
[ 2.883811] pci 0000:01:00.0: enabling Extended Tags
[ 2.889300] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 2.912035] pci 0000:01:00.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 2.921096] pci 0000:02:01.0: [111d:8090] type 01 class 0x060400
[ 2.927464] pci 0000:02:01.0: enabling Extended Tags
[ 2.933019] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 2.940888] pci 0000:02:02.0: [111d:8090] type 01 class 0x060400
[ 2.947239] pci 0000:02:02.0: enabling Extended Tags
[ 2.952800] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[ 2.960528] pci 0000:02:03.0: [111d:8090] type 01 class 0x060400
[ 2.966878] pci 0000:02:03.0: enabling Extended Tags
[ 2.972510] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
[ 2.981398] pci 0000:02:0c.0: [111d:8090] type 01 class 0x060400
[ 2.987748] pci 0000:02:0c.0: enabling Extended Tags
[ 2.993290] pci 0000:02:0c.0: PME# supported from D0 D3hot D3cold
[ 3.001459] pci 0000:02:10.0: [111d:8090] type 01 class 0x060400
[ 3.007800] pci 0000:02:10.0: enabling Extended Tags
[ 3.013328] pci 0000:02:10.0: PME# supported from D0 D3hot D3cold
[ 3.023092] pci 0000:02:1f.0: [111d:8090] type 01 class 0x060400
[ 3.029441] pci 0000:02:1f.0: enabling Extended Tags
[ 3.035006] pci 0000:02:1f.0: PME# supported from D0 D3hot D3cold
[ 3.042616] pci 0000:02:01.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 3.050758] pci 0000:02:02.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 3.058875] pci 0000:02:03.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 3.066990] pci 0000:02:0c.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 3.075105] pci 0000:02:10.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 3.083220] pci 0000:02:1f.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 3.092250] pci 0000:03:00.0: [1095:3132] type 00 class 0x018000
[ 3.098460] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x0000007f 64bit]
[ 3.105387] pci 0000:03:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit]
[ 3.112282] pci 0000:03:00.0: reg 0x20: [io 0x0000-0x007f]
[ 3.117995] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 3.125153] pci 0000:03:00.0: supports D1 D2
[ 3.130712] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe
device. You can enable it with 'pcie_aspm=force'
[ 3.145388] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
[ 3.157318] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
[ 3.169246] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05
[ 3.181213] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06
[ 3.193081] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07
[ 3.200561] pci 0000:08:00.0: [11ab:4380] type 00 class 0x020000
[ 3.206755] pci 0000:08:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[ 3.213669] pci 0000:08:00.0: reg 0x18: [io 0x0000-0x00ff]
[ 3.219884] pci 0000:08:00.0: supports D1 D2
[ 3.224209] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.237040] pci_bus 0000:08: busn_res: [bus 08-ff] end is updated to 08
[ 3.243744] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 08
[ 3.250445] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 08
[ 3.257237] pci 0000:00:00.0: BAR 14: assigned [mem 0x50000000-0x501fffff]
[ 3.264190] pci 0000:00:00.0: BAR 0: assigned [mem
0x4000000000-0x4000003fff 64bit pref]
[ 3.272421] pci 0000:00:00.0: BAR 13: assigned [io 0x1000-0x2fff]
[ 3.278807] pci 0000:01:00.0: BAR 14: assigned [mem 0x50000000-0x501fffff]
[ 3.285768] pci 0000:01:00.0: BAR 13: assigned [io 0x1000-0x2fff]
[ 3.292159] pci 0000:02:01.0: BAR 14: assigned [mem 0x50000000-0x500fffff]
[ 3.299105] pci 0000:02:1f.0: BAR 14: assigned [mem 0x50100000-0x501fffff]
[ 3.306048] pci 0000:02:01.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 3.312295] pci 0000:02:1f.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 3.318657] pci 0000:03:00.0: BAR 6: assigned [mem
0x50000000-0x5007ffff pref]
[ 3.325957] pci 0000:03:00.0: BAR 2: assigned [mem
0x50080000-0x50083fff 64bit]
[ 3.333419] pci 0000:03:00.0: BAR 0: assigned [mem
0x50084000-0x5008407f 64bit]
[ 3.340857] pci 0000:03:00.0: BAR 4: assigned [io 0x1000-0x107f]
[ 3.347089] pci 0000:02:01.0: PCI bridge to [bus 03]
[ 3.352118] pci 0000:02:01.0: bridge window [io 0x1000-0x1fff]
[ 3.358296] pci 0000:02:01.0: bridge window [mem 0x50000000-0x500fffff]
[ 3.365221] pci 0000:02:02.0: PCI bridge to [bus 04]
[ 3.370319] pci 0000:02:03.0: PCI bridge to [bus 05]
[ 3.375415] pci 0000:02:0c.0: PCI bridge to [bus 06]
[ 3.380514] pci 0000:02:10.0: PCI bridge to [bus 07]
[ 3.385703] pci 0000:08:00.0: BAR 0: assigned [mem
0x50100000-0x50103fff 64bit]
[ 3.393160] pci 0000:08:00.0: BAR 2: assigned [io 0x2000-0x20ff]
[ 3.399426] pci 0000:02:1f.0: PCI bridge to [bus 08]
[ 3.404456] pci 0000:02:1f.0: bridge window [io 0x2000-0x2fff]
[ 3.410634] pci 0000:02:1f.0: bridge window [mem 0x50100000-0x501fffff]
[ 3.417533] pci 0000:01:00.0: PCI bridge to [bus 02-08]
[ 3.422824] pci 0000:01:00.0: bridge window [io 0x1000-0x2fff]
[ 3.429001] pci 0000:01:00.0: bridge window [mem 0x50000000-0x501fffff]
[ 3.435901] pci 0000:00:00.0: PCI bridge to [bus 01-08]
[ 3.441190] pci 0000:00:00.0: bridge window [io 0x1000-0x2fff]
[ 3.447362] pci 0000:00:00.0: bridge window [mem 0x50000000-0x501fffff]
[ 3.476228] EINJ: ACPI disabled.
[ 3.623896] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 3.665227] SuperH (H)SCI(F) driver initialized
[ 3.673416] msm_serial: driver initialized
[ 3.686482] arm-smmu 2b500000.iommu: probing hardware configuration...
[ 3.693103] arm-smmu 2b500000.iommu: SMMUv1 with:
[ 3.697866] arm-smmu 2b500000.iommu: stage 2 translation
[ 3.703321] arm-smmu 2b500000.iommu: coherent table walk
[ 3.708856] arm-smmu 2b500000.iommu: stream matching with 32 register groups
[ 3.716063] arm-smmu 2b500000.iommu: 4 context banks (4 stage-2 only)
[ 3.722660] arm-smmu 2b500000.iommu: Supported page sizes: 0x60211000
[ 3.729248] arm-smmu 2b500000.iommu: Stage-2: 40-bit IPA -> 40-bit PA
[ 3.739538] arm-smmu 7fb00000.iommu: probing hardware configuration...
[ 3.746128] arm-smmu 7fb00000.iommu: SMMUv1 with:
[ 3.750887] arm-smmu 7fb00000.iommu: stage 2 translation
[ 3.756361] arm-smmu 7fb00000.iommu: coherent table walk
[ 3.761824] arm-smmu 7fb00000.iommu: stream matching with 16 register groups
[ 3.769028] arm-smmu 7fb00000.iommu: 4 context banks (4 stage-2 only)
[ 3.775623] arm-smmu 7fb00000.iommu: Supported page sizes: 0x60211000
[ 3.782233] arm-smmu 7fb00000.iommu: Stage-2: 40-bit IPA -> 40-bit PA
[ 3.790366] arm-smmu 7fb10000.iommu: probing hardware configuration...
[ 3.796958] arm-smmu 7fb10000.iommu: SMMUv1 with:
[ 3.801717] arm-smmu 7fb10000.iommu: stage 2 translation
[ 3.807170] arm-smmu 7fb10000.iommu: non-coherent table walk
[ 3.812972] arm-smmu 7fb10000.iommu: (IDR0.CTTW overridden by FW
configuration)
[ 3.820529] arm-smmu 7fb10000.iommu: stream matching with 2 register groups
[ 3.827647] arm-smmu 7fb10000.iommu: 1 context banks (1 stage-2 only)
[ 3.834326] arm-smmu 7fb10000.iommu: Supported page sizes: 0x60211000
[ 3.840917] arm-smmu 7fb10000.iommu: Stage-2: 40-bit IPA -> 40-bit PA
[ 3.849014] arm-smmu 7fb20000.iommu: probing hardware configuration...
[ 3.855605] arm-smmu 7fb20000.iommu: SMMUv1 with:
[ 3.860365] arm-smmu 7fb20000.iommu: stage 2 translation
[ 3.865818] arm-smmu 7fb20000.iommu: non-coherent table walk
[ 3.871620] arm-smmu 7fb20000.iommu: (IDR0.CTTW overridden by FW
configuration)
[ 3.879099] arm-smmu 7fb20000.iommu: stream matching with 2 register groups
[ 3.886253] arm-smmu 7fb20000.iommu: 1 context banks (1 stage-2 only)
[ 3.892849] arm-smmu 7fb20000.iommu: Supported page sizes: 0x60211000
[ 3.899436] arm-smmu 7fb20000.iommu: Stage-2: 40-bit IPA -> 40-bit PA
[ 3.907530] arm-smmu 7fb30000.iommu: probing hardware configuration...
[ 3.914119] arm-smmu 7fb30000.iommu: SMMUv1 with:
[ 3.918878] arm-smmu 7fb30000.iommu: stage 2 translation
[ 3.924331] arm-smmu 7fb30000.iommu: coherent table walk
[ 3.929792] arm-smmu 7fb30000.iommu: stream matching with 2 register groups
[ 3.936908] arm-smmu 7fb30000.iommu: 1 context banks (1 stage-2 only)
[ 3.943523] arm-smmu 7fb30000.iommu: Supported page sizes: 0x60211000
[ 3.950111] arm-smmu 7fb30000.iommu: Stage-2: 40-bit IPA -> 40-bit PA
[ 4.004593] loop: module loaded
[ 4.016062] megasas: 07.719.03.00-rc1
[ 4.029694] sata_sil24 0000:03:00.0: Adding to iommu group 0
[ 4.037159] pci 0000:00:00.0: enabling device (0000 -> 0003)
[ 4.042945] pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 4.048726] pci 0000:02:01.0: enabling device (0000 -> 0003)
[ 4.054489] sata_sil24 0000:03:00.0: enabling device (0000 -> 0003)
[ 4.069542] scsi host0: sata_sil24
[ 4.077595] scsi host1: sata_sil24
[ 4.082454] ata1: SATA max UDMA/100 host m128@0x50084000 port
0x50080000 irq 53
[ 4.089834] ata2: SATA max UDMA/100 host m128@0x50084000 port
0x50082000 irq 53
[ 4.127375] libphy: Fixed MDIO Bus: probed
[ 4.147584] thunder_xcv, ver 1.0
[ 4.151216] thunder_bgx, ver 1.0
[ 4.154892] nicpf, ver 1.0
[ 4.167502] hclge is initializing
[ 4.170980] hns3: Hisilicon Ethernet Network Driver for Hip08
Family - version
[ 4.178262] hns3: Copyright (c) 2017 Huawei Corporation.
[ 4.184055] e1000: Intel(R) PRO/1000 Network Driver
[ 4.188985] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 4.195196] e1000e: Intel(R) PRO/1000 Network Driver
[ 4.200212] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 4.206602] igb: Intel(R) Gigabit Ethernet Network Driver
[ 4.212079] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 4.218093] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 4.224416] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 4.232850] sky2: driver version 1.30
[ 4.238276] sky2 0000:08:00.0: Adding to iommu group 0
[ 4.244144] pci 0000:02:1f.0: enabling device (0000 -> 0003)
[ 4.249918] sky2 0000:08:00.0: enabling device (0000 -> 0003)
[ 4.256092] sky2 0000:08:00.0: Yukon-2 UL 2 chip revision 0
[ 4.261855] sky2 0000:08:00.0: Invalid MAC address, defaulting to random
[ 4.272572] sky2 0000:08:00.0 eth0: addr ba:6d:65:73:db:e5
[ 4.278606] QLogic FastLinQ 4xxxx Core Module qed
[ 4.283375] qede init: QLogic FastLinQ 4xxxx Ethernet Driver qede
[ 4.326539] libphy: smsc911x-mdio: probed
[ 4.333293] smsc911x 18000000.ethernet eth1: MAC Address: 00:02:f7:00:66:df
[ 4.344531] usbcore: registered new interface driver asix
[ 4.350213] usbcore: registered new interface driver ax88179_178a
[ 4.357666] VFIO - User Level meta-driver version: 0.3
[ 4.376743] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.383410] ehci-pci: EHCI PCI platform driver
[ 4.388190] ehci-platform: EHCI generic platform driver
[ 4.395070] ehci-platform 7ffc0000.usb: Adding to iommu group 1
[ 4.402738] ehci-platform 7ffc0000.usb: EHCI Host Controller
[ 4.408554] ehci-platform 7ffc0000.usb: new USB bus registered,
assigned bus number 1
[ 4.417545] ehci-platform 7ffc0000.usb: irq 44, io mem 0x7ffc0000
[ 4.439375] ehci-platform 7ffc0000.usb: USB 2.0 started, EHCI 1.00
[ 4.451188] hub 1-0:1.0: USB hub found
[ 4.455356] hub 1-0:1.0: 1 port detected
[ 4.462281] ehci-orion: EHCI orion driver
[ 4.467189] ehci-exynos: EHCI Exynos driver
[ 4.472157] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.478454] ohci-pci: OHCI PCI platform driver
[ 4.483333] ohci-platform: OHCI generic platform driver
[ 4.490060] ohci-platform 7ffb0000.usb: Adding to iommu group 1
[ 4.496683] ohci-platform 7ffb0000.usb: Generic Platform OHCI controller
[ 4.503532] ohci-platform 7ffb0000.usb: new USB bus registered,
assigned bus number 2
[ 4.512246] ohci-platform 7ffb0000.usb: irq 43, io mem 0x7ffb0000
[ 4.600271] hub 2-0:1.0: USB hub found
[ 4.604395] hub 2-0:1.0: 1 port detected
[ 4.611427] ohci-exynos: OHCI Exynos driver
[ 4.619443] usbcore: registered new interface driver usb-storage
[ 4.649441] rtc-pl031 1c170000.rtc: registered as rtc0
[ 4.654710] rtc-pl031 1c170000.rtc: setting system clock to
2021-12-18T15:25:29 UTC (1639841129)
[ 4.668155] i2c_dev: i2c /dev entries driver
[ 4.705169] sp805-wdt 1c0f0000.watchdog: registration successful
[ 4.715487] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 4.739832] mmci-pl18x 1c050000.mmc: mmc0: PL180 manf 41 rev0 at
0x1c050000 irq 17,0 (pio)
[ 4.775015] sdhci: Secure Digital Host Controller Interface driver
[ 4.781367] sdhci: Copyright(c) Pierre Ossman
[ 4.791511] Synopsys Designware Multimedia Card Interface Driver
[ 4.805011] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.822209] leds-syscon 1c010008.0.led: registered LED (null)
[ 4.829674] leds-syscon 1c010008.1.led: registered LED (null)
[ 4.836726] leds-syscon 1c010008.2.led: registered LED (null)
[ 4.843752] leds-syscon 1c010008.3.led: registered LED (null)
[ 4.850854] leds-syscon 1c010008.4.led: registered LED (null)
[ 4.858314] leds-syscon 1c010008.5.led: registered LED (null)
[ 4.865509] leds-syscon 1c010008.6.led: registered LED (null)
[ 4.872520] leds-syscon 1c010008.7.led: registered LED (null)
[ 4.882523] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.891915] hub 1-1:1.0: USB hub found
[ 4.896529] hub 1-1:1.0: 4 ports detected
[ 4.906827] usbcore: registered new interface driver usbhid
[ 4.912467] usbhid: USB HID core driver
[ 4.920845] mhu 2b1f0000.mhu: ARM MHU Mailbox registered
[ 4.943934] cs_system_cfg: CoreSight Configuration manager initialised
[ 4.981366] NET: Registered PF_INET6 protocol family
[ 4.995703] Segment Routing with IPv6
[ 4.999593] In-situ OAM (IOAM) with IPv6
[ 5.003834] NET: Registered PF_PACKET protocol family
[ 5.009800] 9pnet: Installing 9P2000 support
[ 5.014476] Key type dns_resolver registered
[ 5.026562] registered taskstats version 1
[ 5.030906] Loading compiled-in X.509 certificates
[ 5.233983] pcieport 0000:00:00.0: Adding to iommu group 0
[ 5.262137] sysfs: cannot create duplicate filename
'/devices/platform/40000000.pcie/pci0000:00/0000:00:00.0/msi_irqs/57'
[ 5.273266] CPU: 0 PID: 81 Comm: kworker/u12:4 Not tainted
5.16.0-rc5-next-20211217 #1
[ 5.281255] Hardware name: ARM Juno development board (r2) (DT)
[ 5.287225] Workqueue: events_unbound deferred_probe_work_func
[ 5.293171] Call trace:
[ 5.295646] dump_backtrace+0x228/0x240
[ 5.299545] show_stack+0x24/0x80
[ 5.302913] dump_stack_lvl+0x8c/0xb8
[ 5.306650] dump_stack+0x1c/0x38
[ 5.310032] sysfs_warn_dup+0x7c/0xa0
[ 5.313765] sysfs_add_file_mode_ns+0x1ac/0x1b4
[ 5.318369] sysfs_add_file_to_group+0xf0/0x160
[ 5.322972] __msi_domain_alloc_irqs+0x3f0/0x554
[ 5.327662] msi_domain_alloc_irqs_descs_locked+0x78/0x130
[ 5.333225] pci_msi_setup_msi_irqs+0x58/0x80
[ 5.337656] __pci_enable_msi_range+0x428/0x5f0
[ 5.342257] pci_alloc_irq_vectors_affinity+0x15c/0x1c0
[ 5.347559] pcie_port_device_register+0x1e0/0x564
[ 5.352426] pcie_portdrv_probe+0x5c/0x130
[ 5.356593] local_pci_probe+0x84/0x10c
[ 5.360501] pci_device_probe+0x284/0x300
[ 5.364584] really_probe+0x11c/0x684
[ 5.368322] __driver_probe_device+0x194/0x22c
[ 5.372845] driver_probe_device+0x68/0x150
[ 5.377106] __device_attach_driver+0xf8/0x180
[ 5.381631] bus_for_each_drv+0xf8/0x160
[ 5.385625] __device_attach+0x170/0x294
[ 5.389624] device_initial_probe+0x20/0x30
[ 5.393886] bus_probe_device+0xf4/0x104
[ 5.397882] deferred_probe_work_func+0x108/0x160
[ 5.402667] process_one_work+0x3c8/0x850
[ 5.406745] worker_thread+0x3d8/0x734
[ 5.410559] kthread+0x1fc/0x214
[ 5.413861] ret_from_fork+0x10/0x20
[ 5.427632] ==================================================================
[ 5.434888] BUG: KASAN: use-after-free in __pci_enable_msi_range+0x208/0x5f0
[ 5.441983] Read of size 2 at addr ffff000826404554 by task kworker/u12:4/81
[ 5.449059]
[ 5.450557] CPU: 1 PID: 81 Comm: kworker/u12:4 Not tainted
5.16.0-rc5-next-20211217 #1
[ 5.458507] Hardware name: ARM Juno development board (r2) (DT)
[ 5.464446] Workqueue: events_unbound deferred_probe_work_func
[ 5.470322] Call trace:
[ 5.472776] dump_backtrace+0x228/0x240
[ 5.476635] show_stack+0x24/0x80
[ 5.479967] dump_stack_lvl+0x8c/0xb8
[ 5.483656] print_address_description.constprop.0+0x74/0x2b8
[ 5.489433] kasan_report+0x1e8/0x250
[ 5.493119] __asan_load2+0x9c/0xc4
[ 5.496629] __pci_enable_msi_range+0x208/0x5f0
[ 5.501184] pci_alloc_irq_vectors_affinity+0x15c/0x1c0
[ 5.506438] pcie_port_device_register+0x1e0/0x564
[ 5.511255] pcie_portdrv_probe+0x5c/0x130
[ 5.515376] local_pci_probe+0x84/0x10c
[ 5.519235] pci_device_probe+0x284/0x300
[ 5.523270] really_probe+0x11c/0x684
[ 5.526956] __driver_probe_device+0x194/0x22c
[ 5.531427] driver_probe_device+0x68/0x150
[ 5.535637] __device_attach_driver+0xf8/0x180
[ 5.540108] bus_for_each_drv+0xf8/0x160
[ 5.544054] __device_attach+0x170/0x294
[ 5.548002] device_initial_probe+0x20/0x30
[ 5.552212] bus_probe_device+0xf4/0x104
[ 5.556159] deferred_probe_work_func+0x108/0x160
[ 5.560890] process_one_work+0x3c8/0x850
[ 5.564923] worker_thread+0x3d8/0x734
[ 5.568693] kthread+0x1fc/0x214
[ 5.571944] ret_from_fork+0x10/0x20
[ 5.575543]
[ 5.577038] Allocated by task 81:
[ 5.580364] kasan_save_stack+0x2c/0x54
[ 5.584223] __kasan_kmalloc+0xac/0x10c
[ 5.588080] kmem_cache_alloc_trace+0x220/0x3e0
[ 5.592633] msi_add_msi_desc+0x64/0x1a0
[ 5.596577] msi_setup_msi_desc+0x1b8/0x210
[ 5.600782] __pci_enable_msi_range+0x3c8/0x5f0
[ 5.605337] pci_alloc_irq_vectors_affinity+0x15c/0x1c0
[ 5.610588] pcie_port_device_register+0x1e0/0x564
[ 5.615405] pcie_portdrv_probe+0x5c/0x130
[ 5.619524] local_pci_probe+0x84/0x10c
[ 5.623382] pci_device_probe+0x284/0x300
[ 5.627415] really_probe+0x11c/0x684
[ 5.631100] __driver_probe_device+0x194/0x22c
[ 5.635571] driver_probe_device+0x68/0x150
[ 5.639779] __device_attach_driver+0xf8/0x180
[ 5.644249] bus_for_each_drv+0xf8/0x160
[ 5.648194] __device_attach+0x170/0x294
[ 5.652141] device_initial_probe+0x20/0x30
[ 5.655485] atkbd serio0: keyboard reset failed on 1c060000.kmi
[ 5.656348] bus_probe_device+0xf4/0x104
[ 5.666210] deferred_probe_work_func+0x108/0x160
[ 5.670941] process_one_work+0x3c8/0x850
[ 5.674971] worker_thread+0x3d8/0x734
[ 5.678740] kthread+0x1fc/0x214
[ 5.681991] ret_from_fork+0x10/0x20
[ 5.685586]
[ 5.687081] Freed by task 81:
[ 5.690058] kasan_save_stack+0x2c/0x54
[ 5.693915] kasan_set_track+0x2c/0x40
[ 5.697684] kasan_set_free_info+0x28/0x50
[ 5.701804] __kasan_slab_free+0x108/0x15c
[ 5.705923] slab_free_freelist_hook+0xc0/0x220
[ 5.710475] kfree+0xe8/0x3e0
[ 5.713459] msi_free_msi_descs_range+0x12c/0x1a0
[ 5.718186] msi_domain_alloc_irqs_descs_locked+0xf0/0x130
[ 5.723700] pci_msi_setup_msi_irqs+0x58/0x80
[ 5.728080] __pci_enable_msi_range+0x428/0x5f0
[ 5.732634] pci_alloc_irq_vectors_affinity+0x15c/0x1c0
[ 5.737885] pcie_port_device_register+0x1e0/0x564
[ 5.742702] pcie_portdrv_probe+0x5c/0x130
[ 5.746821] local_pci_probe+0x84/0x10c
[ 5.750679] pci_device_probe+0x284/0x300
[ 5.754712] really_probe+0x11c/0x684
[ 5.758397] __driver_probe_device+0x194/0x22c
[ 5.762867] driver_probe_device+0x68/0x150
[ 5.767076] __device_attach_driver+0xf8/0x180
[ 5.771545] bus_for_each_drv+0xf8/0x160
[ 5.775491] __device_attach+0x170/0x294
[ 5.779437] device_initial_probe+0x20/0x30
[ 5.783646] bus_probe_device+0xf4/0x104
[ 5.787592] deferred_probe_work_func+0x108/0x160
[ 5.792323] process_one_work+0x3c8/0x850
[ 5.796354] worker_thread+0x3d8/0x734
[ 5.800123] kthread+0x1fc/0x214
[ 5.803373] ret_from_fork+0x10/0x20
[ 5.806968]
[ 5.808462] The buggy address belongs to the object at ffff000826404500
[ 5.808462] which belongs to the cache kmalloc-128 of size 128
[ 5.821018] The buggy address is located 84 bytes inside of
[ 5.821018] 128-byte region [ffff000826404500, ffff000826404580)
[ 5.832708] The buggy address belongs to the page:
[ 5.837513] page:(____ptrval____) refcount:1 mapcount:0
mapping:0000000000000000 index:0x0 pfn:0x8a6404
[ 5.846939] flags: 0xbfffc0000000200(slab|node=0|zone=2|lastcpupid=0xffff)
[ 5.853852] raw: 0bfffc0000000200 0000000000000000 dead000000000122
ffff000800002300
[ 5.861625] raw: 0000000000000000 0000000000100010 00000001ffffffff
0000000000000000
[ 5.869390] page dumped because: kasan: bad access detected
[ 5.874978]
[ 5.876472] Memory state around the buggy address:
[ 5.881279] ffff000826404400: 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
[ 5.888525] ffff000826404480: fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc fc
[ 5.895771] >ffff000826404500: fa fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[ 5.903014] ^
[ 5.908866] ffff000826404580: fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc fc
[ 5.916112] ffff000826404600: 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
[ 5.923356] ==================================================================
[ 5.930596] Disabling lock debugging due to kernel taint
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Test log link,
https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20211217/testrun/6919678/suite/ltp-syscalls-tests/test/add_key05/log
Test results comparison:
https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20211217/testrun/6919678/suite/ltp-syscalls-tests/test/add_key05/history/
meta data:
-----------
git describe: next-20211215 and next-20211217
git_repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
git_sha: 93bf6eee76c0e716f6b32de690b1c52991547bb4
git_short_log: 93bf6eee76c0 (\"Add linux-next specific files for 20211215\")
target_arch: arm64
toolchain: gcc-10
Kconfig: https://builds.tuxbuild.com/22LCvyVwJ8E7fRfLPA2BgPKnWiR/config
vmlinux: https://builds.tuxbuild.com/22PqZcj0pMjg0qWW8Ilyx0MhKOH/vmlinux.xz
System.map :
https://builds.tuxbuild.com/22PqZcj0pMjg0qWW8Ilyx0MhKOH/System.map
build log: https://builds.tuxbuild.com/22LCvyVwJ8E7fRfLPA2BgPKnWiR/
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 2+ messages in thread
* [next] arm64: juno-r2: BUG: KASAN: use-after-free in __pci_enable_msi_range
@ 2021-12-20 9:54 ` Naresh Kamboju
0 siblings, 0 replies; 2+ messages in thread
From: Naresh Kamboju @ 2021-12-20 9:54 UTC (permalink / raw)
To: PCI, open list, Linux ARM, Linux-Next Mailing List
Cc: Bjorn Helgaas, Jason Gunthorpe, Thomas Gleixner,
Greg Kroah-Hartman, Juergen Gross, Jason Gunthorpe, regressions,
lkft-triage
While booting Linux next 20211215 and next 20211217 on arm64 juno-r2 device
the following kernel crash reported and several LTP syscalls test cases,
Only noticed on juno-r2 whereas dragonboard-410c and hikey-hi6220 tests pass.
Test case failure:
add_key05.c:207: TBROK: Failed to open FILE
'/proc/sys/kernel/keys/gc_delay' for writing: ENOENT (2)
tst_taint.c:15: TBROK: Failed to open FILE '/proc/sys/kernel/tainted'
for reading: ENOENT (2)
tst_pid.c:43: TBROK: Failed to open FILE '/proc/sys/kernel/pid_max'
for reading: ENOENT (2)
arm64 juno-r2 kernel crash log while booting.
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000100 [0x410fd033]
[ 0.000000] Linux version 5.16.0-rc5-next-20211217
(tuxmake@tuxmake) (aarch64-linux-gnu-gcc (Debian 11.2.0-9) 11.2.0, GNU
ld (GNU Binutils for Debian) 2.37) #1 SMP PREEMPT @1639749733
[ 0.000000] Machine model: ARM Juno development board (r2)
<trim>
[ 2.191774] hw perfevents: enabled with armv8_cortex_a72 PMU
driver, 7 counters available
[ 2.201822] sysctl duplicate entry: /kernel//perf_user_access
[ 2.207718] CPU: 2 PID: 1 Comm: swapper/0 Not tainted
5.16.0-rc5-next-20211217 #1
[ 2.215235] Hardware name: ARM Juno development board (r2) (DT)
[ 2.221175] Call trace:
[ 2.223629] dump_backtrace+0x228/0x240
[ 2.227493] show_stack+0x24/0x80
[ 2.230827] dump_stack_lvl+0x8c/0xb8
[ 2.234515] dump_stack+0x1c/0x38
[ 2.237851] __register_sysctl_table+0x520/0xa30
[ 2.242499] register_sysctl+0x2c/0x40
[ 2.246273] armv8_a53_pmu_init+0x21c/0x264
[ 2.250481] arm_pmu_device_probe+0x254/0x6e0
[ 2.254867] armv8_pmu_device_probe+0x28/0x34
[ 2.259248] platform_probe+0x98/0x120
[ 2.263018] really_probe+0x11c/0x684
[ 2.266705] __driver_probe_device+0x194/0x22c
[ 2.271177] driver_probe_device+0x68/0x150
[ 2.275386] __driver_attach+0x124/0x260
[ 2.279335] bus_for_each_dev+0xf0/0x160
[ 2.283281] driver_attach+0x40/0x50
[ 2.286880] bus_add_driver+0x20c/0x300
[ 2.290739] driver_register+0xf8/0x21c
[ 2.294601] __platform_driver_register+0x50/0x60
[ 2.299328] armv8_pmu_driver_init+0x40/0x60
[ 2.303623] do_one_initcall+0xa8/0x3ec
[ 2.307480] kernel_init_freeable+0x300/0x388
[ 2.311864] kernel_init+0x30/0x15c
[ 2.315374] ret_from_fork+0x10/0x20
[ 2.320928] hw perfevents: enabled with armv8_cortex_a53 PMU
driver, 7 counters available
[ 2.329472] kvm [1]: IPA Size Limit: 40 bits
[ 2.342423] kvm [1]: vgic interrupt IRQ9
[ 2.347393] kvm [1]: Hyp mode initialized successfully
[ 2.362544] Initialise system trusted keyrings
[ 2.368278] workingset: timestamp_bits=42 max_order=21 bucket_order=0
[ 2.428029] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.439945] NFS: Registering the id_resolver key type
[ 2.445176] Key type id_resolver registered
[ 2.449411] Key type id_legacy registered
[ 2.454010] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 2.460773] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver
Registering...
[ 2.469105] 9p: Installing v9fs 9p2000 file system support
[ 2.515228] NET: Registered PF_ALG protocol family
[ 2.520108] Key type asymmetric registered
[ 2.524277] Asymmetric key parser 'x509' registered
[ 2.529923] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 244)
[ 2.537382] io scheduler mq-deadline registered
[ 2.541964] io scheduler kyber registered
[ 2.631942] pl061_gpio 1c1d0000.gpio: PL061 GPIO chip registered
[ 2.653688] pci-host-generic 40000000.pcie: host bridge
/pcie@40000000 ranges:
[ 2.661162] pci-host-generic 40000000.pcie: IO
0x005f800000..0x005fffffff -> 0x0000000000
[ 2.670092] pci-host-generic 40000000.pcie: MEM
0x0050000000..0x0057ffffff -> 0x0050000000
[ 2.678953] pci-host-generic 40000000.pcie: MEM
0x4000000000..0x40ffffffff -> 0x4000000000
[ 2.687901] pci-host-generic 40000000.pcie: IB MEM
0x002c1c0000..0x002c1fffff -> 0x002c1c0000
[ 2.696819] pci-host-generic 40000000.pcie: IB MEM
0x0080000000..0x00ffffffff -> 0x0080000000
[ 2.705670] pci-host-generic 40000000.pcie: IB MEM
0x0800000000..0x09ffffffff -> 0x0800000000
[ 2.793723] pci-host-generic 40000000.pcie: ECAM at [mem
0x40000000-0x4fffffff] for [bus 00-ff]
[ 2.803466] pci-host-generic 40000000.pcie: PCI host bridge to bus 0000:00
[ 2.810427] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.816008] pci_bus 0000:00: root bus resource [io 0x0000-0x7fffff]
[ 2.822435] pci_bus 0000:00: root bus resource [mem 0x50000000-0x57ffffff]
[ 2.829384] pci_bus 0000:00: root bus resource [mem
0x4000000000-0x40ffffffff pref]
[ 2.837252] pci 0000:00:00.0: [1556:1100] type 01 class 0x060400
[ 2.843508] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00003fff
64bit pref]
[ 2.851351] pci 0000:00:00.0: supports D1 D2
[ 2.855676] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.868561] pci 0000:00:00.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 2.877468] pci 0000:01:00.0: [111d:8090] type 01 class 0x060400
[ 2.883811] pci 0000:01:00.0: enabling Extended Tags
[ 2.889300] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 2.912035] pci 0000:01:00.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 2.921096] pci 0000:02:01.0: [111d:8090] type 01 class 0x060400
[ 2.927464] pci 0000:02:01.0: enabling Extended Tags
[ 2.933019] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 2.940888] pci 0000:02:02.0: [111d:8090] type 01 class 0x060400
[ 2.947239] pci 0000:02:02.0: enabling Extended Tags
[ 2.952800] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[ 2.960528] pci 0000:02:03.0: [111d:8090] type 01 class 0x060400
[ 2.966878] pci 0000:02:03.0: enabling Extended Tags
[ 2.972510] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
[ 2.981398] pci 0000:02:0c.0: [111d:8090] type 01 class 0x060400
[ 2.987748] pci 0000:02:0c.0: enabling Extended Tags
[ 2.993290] pci 0000:02:0c.0: PME# supported from D0 D3hot D3cold
[ 3.001459] pci 0000:02:10.0: [111d:8090] type 01 class 0x060400
[ 3.007800] pci 0000:02:10.0: enabling Extended Tags
[ 3.013328] pci 0000:02:10.0: PME# supported from D0 D3hot D3cold
[ 3.023092] pci 0000:02:1f.0: [111d:8090] type 01 class 0x060400
[ 3.029441] pci 0000:02:1f.0: enabling Extended Tags
[ 3.035006] pci 0000:02:1f.0: PME# supported from D0 D3hot D3cold
[ 3.042616] pci 0000:02:01.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 3.050758] pci 0000:02:02.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 3.058875] pci 0000:02:03.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 3.066990] pci 0000:02:0c.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 3.075105] pci 0000:02:10.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 3.083220] pci 0000:02:1f.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 3.092250] pci 0000:03:00.0: [1095:3132] type 00 class 0x018000
[ 3.098460] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x0000007f 64bit]
[ 3.105387] pci 0000:03:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit]
[ 3.112282] pci 0000:03:00.0: reg 0x20: [io 0x0000-0x007f]
[ 3.117995] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 3.125153] pci 0000:03:00.0: supports D1 D2
[ 3.130712] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe
device. You can enable it with 'pcie_aspm=force'
[ 3.145388] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
[ 3.157318] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
[ 3.169246] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05
[ 3.181213] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06
[ 3.193081] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07
[ 3.200561] pci 0000:08:00.0: [11ab:4380] type 00 class 0x020000
[ 3.206755] pci 0000:08:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[ 3.213669] pci 0000:08:00.0: reg 0x18: [io 0x0000-0x00ff]
[ 3.219884] pci 0000:08:00.0: supports D1 D2
[ 3.224209] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.237040] pci_bus 0000:08: busn_res: [bus 08-ff] end is updated to 08
[ 3.243744] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 08
[ 3.250445] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 08
[ 3.257237] pci 0000:00:00.0: BAR 14: assigned [mem 0x50000000-0x501fffff]
[ 3.264190] pci 0000:00:00.0: BAR 0: assigned [mem
0x4000000000-0x4000003fff 64bit pref]
[ 3.272421] pci 0000:00:00.0: BAR 13: assigned [io 0x1000-0x2fff]
[ 3.278807] pci 0000:01:00.0: BAR 14: assigned [mem 0x50000000-0x501fffff]
[ 3.285768] pci 0000:01:00.0: BAR 13: assigned [io 0x1000-0x2fff]
[ 3.292159] pci 0000:02:01.0: BAR 14: assigned [mem 0x50000000-0x500fffff]
[ 3.299105] pci 0000:02:1f.0: BAR 14: assigned [mem 0x50100000-0x501fffff]
[ 3.306048] pci 0000:02:01.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 3.312295] pci 0000:02:1f.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 3.318657] pci 0000:03:00.0: BAR 6: assigned [mem
0x50000000-0x5007ffff pref]
[ 3.325957] pci 0000:03:00.0: BAR 2: assigned [mem
0x50080000-0x50083fff 64bit]
[ 3.333419] pci 0000:03:00.0: BAR 0: assigned [mem
0x50084000-0x5008407f 64bit]
[ 3.340857] pci 0000:03:00.0: BAR 4: assigned [io 0x1000-0x107f]
[ 3.347089] pci 0000:02:01.0: PCI bridge to [bus 03]
[ 3.352118] pci 0000:02:01.0: bridge window [io 0x1000-0x1fff]
[ 3.358296] pci 0000:02:01.0: bridge window [mem 0x50000000-0x500fffff]
[ 3.365221] pci 0000:02:02.0: PCI bridge to [bus 04]
[ 3.370319] pci 0000:02:03.0: PCI bridge to [bus 05]
[ 3.375415] pci 0000:02:0c.0: PCI bridge to [bus 06]
[ 3.380514] pci 0000:02:10.0: PCI bridge to [bus 07]
[ 3.385703] pci 0000:08:00.0: BAR 0: assigned [mem
0x50100000-0x50103fff 64bit]
[ 3.393160] pci 0000:08:00.0: BAR 2: assigned [io 0x2000-0x20ff]
[ 3.399426] pci 0000:02:1f.0: PCI bridge to [bus 08]
[ 3.404456] pci 0000:02:1f.0: bridge window [io 0x2000-0x2fff]
[ 3.410634] pci 0000:02:1f.0: bridge window [mem 0x50100000-0x501fffff]
[ 3.417533] pci 0000:01:00.0: PCI bridge to [bus 02-08]
[ 3.422824] pci 0000:01:00.0: bridge window [io 0x1000-0x2fff]
[ 3.429001] pci 0000:01:00.0: bridge window [mem 0x50000000-0x501fffff]
[ 3.435901] pci 0000:00:00.0: PCI bridge to [bus 01-08]
[ 3.441190] pci 0000:00:00.0: bridge window [io 0x1000-0x2fff]
[ 3.447362] pci 0000:00:00.0: bridge window [mem 0x50000000-0x501fffff]
[ 3.476228] EINJ: ACPI disabled.
[ 3.623896] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 3.665227] SuperH (H)SCI(F) driver initialized
[ 3.673416] msm_serial: driver initialized
[ 3.686482] arm-smmu 2b500000.iommu: probing hardware configuration...
[ 3.693103] arm-smmu 2b500000.iommu: SMMUv1 with:
[ 3.697866] arm-smmu 2b500000.iommu: stage 2 translation
[ 3.703321] arm-smmu 2b500000.iommu: coherent table walk
[ 3.708856] arm-smmu 2b500000.iommu: stream matching with 32 register groups
[ 3.716063] arm-smmu 2b500000.iommu: 4 context banks (4 stage-2 only)
[ 3.722660] arm-smmu 2b500000.iommu: Supported page sizes: 0x60211000
[ 3.729248] arm-smmu 2b500000.iommu: Stage-2: 40-bit IPA -> 40-bit PA
[ 3.739538] arm-smmu 7fb00000.iommu: probing hardware configuration...
[ 3.746128] arm-smmu 7fb00000.iommu: SMMUv1 with:
[ 3.750887] arm-smmu 7fb00000.iommu: stage 2 translation
[ 3.756361] arm-smmu 7fb00000.iommu: coherent table walk
[ 3.761824] arm-smmu 7fb00000.iommu: stream matching with 16 register groups
[ 3.769028] arm-smmu 7fb00000.iommu: 4 context banks (4 stage-2 only)
[ 3.775623] arm-smmu 7fb00000.iommu: Supported page sizes: 0x60211000
[ 3.782233] arm-smmu 7fb00000.iommu: Stage-2: 40-bit IPA -> 40-bit PA
[ 3.790366] arm-smmu 7fb10000.iommu: probing hardware configuration...
[ 3.796958] arm-smmu 7fb10000.iommu: SMMUv1 with:
[ 3.801717] arm-smmu 7fb10000.iommu: stage 2 translation
[ 3.807170] arm-smmu 7fb10000.iommu: non-coherent table walk
[ 3.812972] arm-smmu 7fb10000.iommu: (IDR0.CTTW overridden by FW
configuration)
[ 3.820529] arm-smmu 7fb10000.iommu: stream matching with 2 register groups
[ 3.827647] arm-smmu 7fb10000.iommu: 1 context banks (1 stage-2 only)
[ 3.834326] arm-smmu 7fb10000.iommu: Supported page sizes: 0x60211000
[ 3.840917] arm-smmu 7fb10000.iommu: Stage-2: 40-bit IPA -> 40-bit PA
[ 3.849014] arm-smmu 7fb20000.iommu: probing hardware configuration...
[ 3.855605] arm-smmu 7fb20000.iommu: SMMUv1 with:
[ 3.860365] arm-smmu 7fb20000.iommu: stage 2 translation
[ 3.865818] arm-smmu 7fb20000.iommu: non-coherent table walk
[ 3.871620] arm-smmu 7fb20000.iommu: (IDR0.CTTW overridden by FW
configuration)
[ 3.879099] arm-smmu 7fb20000.iommu: stream matching with 2 register groups
[ 3.886253] arm-smmu 7fb20000.iommu: 1 context banks (1 stage-2 only)
[ 3.892849] arm-smmu 7fb20000.iommu: Supported page sizes: 0x60211000
[ 3.899436] arm-smmu 7fb20000.iommu: Stage-2: 40-bit IPA -> 40-bit PA
[ 3.907530] arm-smmu 7fb30000.iommu: probing hardware configuration...
[ 3.914119] arm-smmu 7fb30000.iommu: SMMUv1 with:
[ 3.918878] arm-smmu 7fb30000.iommu: stage 2 translation
[ 3.924331] arm-smmu 7fb30000.iommu: coherent table walk
[ 3.929792] arm-smmu 7fb30000.iommu: stream matching with 2 register groups
[ 3.936908] arm-smmu 7fb30000.iommu: 1 context banks (1 stage-2 only)
[ 3.943523] arm-smmu 7fb30000.iommu: Supported page sizes: 0x60211000
[ 3.950111] arm-smmu 7fb30000.iommu: Stage-2: 40-bit IPA -> 40-bit PA
[ 4.004593] loop: module loaded
[ 4.016062] megasas: 07.719.03.00-rc1
[ 4.029694] sata_sil24 0000:03:00.0: Adding to iommu group 0
[ 4.037159] pci 0000:00:00.0: enabling device (0000 -> 0003)
[ 4.042945] pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 4.048726] pci 0000:02:01.0: enabling device (0000 -> 0003)
[ 4.054489] sata_sil24 0000:03:00.0: enabling device (0000 -> 0003)
[ 4.069542] scsi host0: sata_sil24
[ 4.077595] scsi host1: sata_sil24
[ 4.082454] ata1: SATA max UDMA/100 host m128@0x50084000 port
0x50080000 irq 53
[ 4.089834] ata2: SATA max UDMA/100 host m128@0x50084000 port
0x50082000 irq 53
[ 4.127375] libphy: Fixed MDIO Bus: probed
[ 4.147584] thunder_xcv, ver 1.0
[ 4.151216] thunder_bgx, ver 1.0
[ 4.154892] nicpf, ver 1.0
[ 4.167502] hclge is initializing
[ 4.170980] hns3: Hisilicon Ethernet Network Driver for Hip08
Family - version
[ 4.178262] hns3: Copyright (c) 2017 Huawei Corporation.
[ 4.184055] e1000: Intel(R) PRO/1000 Network Driver
[ 4.188985] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 4.195196] e1000e: Intel(R) PRO/1000 Network Driver
[ 4.200212] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 4.206602] igb: Intel(R) Gigabit Ethernet Network Driver
[ 4.212079] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 4.218093] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 4.224416] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 4.232850] sky2: driver version 1.30
[ 4.238276] sky2 0000:08:00.0: Adding to iommu group 0
[ 4.244144] pci 0000:02:1f.0: enabling device (0000 -> 0003)
[ 4.249918] sky2 0000:08:00.0: enabling device (0000 -> 0003)
[ 4.256092] sky2 0000:08:00.0: Yukon-2 UL 2 chip revision 0
[ 4.261855] sky2 0000:08:00.0: Invalid MAC address, defaulting to random
[ 4.272572] sky2 0000:08:00.0 eth0: addr ba:6d:65:73:db:e5
[ 4.278606] QLogic FastLinQ 4xxxx Core Module qed
[ 4.283375] qede init: QLogic FastLinQ 4xxxx Ethernet Driver qede
[ 4.326539] libphy: smsc911x-mdio: probed
[ 4.333293] smsc911x 18000000.ethernet eth1: MAC Address: 00:02:f7:00:66:df
[ 4.344531] usbcore: registered new interface driver asix
[ 4.350213] usbcore: registered new interface driver ax88179_178a
[ 4.357666] VFIO - User Level meta-driver version: 0.3
[ 4.376743] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.383410] ehci-pci: EHCI PCI platform driver
[ 4.388190] ehci-platform: EHCI generic platform driver
[ 4.395070] ehci-platform 7ffc0000.usb: Adding to iommu group 1
[ 4.402738] ehci-platform 7ffc0000.usb: EHCI Host Controller
[ 4.408554] ehci-platform 7ffc0000.usb: new USB bus registered,
assigned bus number 1
[ 4.417545] ehci-platform 7ffc0000.usb: irq 44, io mem 0x7ffc0000
[ 4.439375] ehci-platform 7ffc0000.usb: USB 2.0 started, EHCI 1.00
[ 4.451188] hub 1-0:1.0: USB hub found
[ 4.455356] hub 1-0:1.0: 1 port detected
[ 4.462281] ehci-orion: EHCI orion driver
[ 4.467189] ehci-exynos: EHCI Exynos driver
[ 4.472157] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.478454] ohci-pci: OHCI PCI platform driver
[ 4.483333] ohci-platform: OHCI generic platform driver
[ 4.490060] ohci-platform 7ffb0000.usb: Adding to iommu group 1
[ 4.496683] ohci-platform 7ffb0000.usb: Generic Platform OHCI controller
[ 4.503532] ohci-platform 7ffb0000.usb: new USB bus registered,
assigned bus number 2
[ 4.512246] ohci-platform 7ffb0000.usb: irq 43, io mem 0x7ffb0000
[ 4.600271] hub 2-0:1.0: USB hub found
[ 4.604395] hub 2-0:1.0: 1 port detected
[ 4.611427] ohci-exynos: OHCI Exynos driver
[ 4.619443] usbcore: registered new interface driver usb-storage
[ 4.649441] rtc-pl031 1c170000.rtc: registered as rtc0
[ 4.654710] rtc-pl031 1c170000.rtc: setting system clock to
2021-12-18T15:25:29 UTC (1639841129)
[ 4.668155] i2c_dev: i2c /dev entries driver
[ 4.705169] sp805-wdt 1c0f0000.watchdog: registration successful
[ 4.715487] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 4.739832] mmci-pl18x 1c050000.mmc: mmc0: PL180 manf 41 rev0 at
0x1c050000 irq 17,0 (pio)
[ 4.775015] sdhci: Secure Digital Host Controller Interface driver
[ 4.781367] sdhci: Copyright(c) Pierre Ossman
[ 4.791511] Synopsys Designware Multimedia Card Interface Driver
[ 4.805011] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.822209] leds-syscon 1c010008.0.led: registered LED (null)
[ 4.829674] leds-syscon 1c010008.1.led: registered LED (null)
[ 4.836726] leds-syscon 1c010008.2.led: registered LED (null)
[ 4.843752] leds-syscon 1c010008.3.led: registered LED (null)
[ 4.850854] leds-syscon 1c010008.4.led: registered LED (null)
[ 4.858314] leds-syscon 1c010008.5.led: registered LED (null)
[ 4.865509] leds-syscon 1c010008.6.led: registered LED (null)
[ 4.872520] leds-syscon 1c010008.7.led: registered LED (null)
[ 4.882523] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.891915] hub 1-1:1.0: USB hub found
[ 4.896529] hub 1-1:1.0: 4 ports detected
[ 4.906827] usbcore: registered new interface driver usbhid
[ 4.912467] usbhid: USB HID core driver
[ 4.920845] mhu 2b1f0000.mhu: ARM MHU Mailbox registered
[ 4.943934] cs_system_cfg: CoreSight Configuration manager initialised
[ 4.981366] NET: Registered PF_INET6 protocol family
[ 4.995703] Segment Routing with IPv6
[ 4.999593] In-situ OAM (IOAM) with IPv6
[ 5.003834] NET: Registered PF_PACKET protocol family
[ 5.009800] 9pnet: Installing 9P2000 support
[ 5.014476] Key type dns_resolver registered
[ 5.026562] registered taskstats version 1
[ 5.030906] Loading compiled-in X.509 certificates
[ 5.233983] pcieport 0000:00:00.0: Adding to iommu group 0
[ 5.262137] sysfs: cannot create duplicate filename
'/devices/platform/40000000.pcie/pci0000:00/0000:00:00.0/msi_irqs/57'
[ 5.273266] CPU: 0 PID: 81 Comm: kworker/u12:4 Not tainted
5.16.0-rc5-next-20211217 #1
[ 5.281255] Hardware name: ARM Juno development board (r2) (DT)
[ 5.287225] Workqueue: events_unbound deferred_probe_work_func
[ 5.293171] Call trace:
[ 5.295646] dump_backtrace+0x228/0x240
[ 5.299545] show_stack+0x24/0x80
[ 5.302913] dump_stack_lvl+0x8c/0xb8
[ 5.306650] dump_stack+0x1c/0x38
[ 5.310032] sysfs_warn_dup+0x7c/0xa0
[ 5.313765] sysfs_add_file_mode_ns+0x1ac/0x1b4
[ 5.318369] sysfs_add_file_to_group+0xf0/0x160
[ 5.322972] __msi_domain_alloc_irqs+0x3f0/0x554
[ 5.327662] msi_domain_alloc_irqs_descs_locked+0x78/0x130
[ 5.333225] pci_msi_setup_msi_irqs+0x58/0x80
[ 5.337656] __pci_enable_msi_range+0x428/0x5f0
[ 5.342257] pci_alloc_irq_vectors_affinity+0x15c/0x1c0
[ 5.347559] pcie_port_device_register+0x1e0/0x564
[ 5.352426] pcie_portdrv_probe+0x5c/0x130
[ 5.356593] local_pci_probe+0x84/0x10c
[ 5.360501] pci_device_probe+0x284/0x300
[ 5.364584] really_probe+0x11c/0x684
[ 5.368322] __driver_probe_device+0x194/0x22c
[ 5.372845] driver_probe_device+0x68/0x150
[ 5.377106] __device_attach_driver+0xf8/0x180
[ 5.381631] bus_for_each_drv+0xf8/0x160
[ 5.385625] __device_attach+0x170/0x294
[ 5.389624] device_initial_probe+0x20/0x30
[ 5.393886] bus_probe_device+0xf4/0x104
[ 5.397882] deferred_probe_work_func+0x108/0x160
[ 5.402667] process_one_work+0x3c8/0x850
[ 5.406745] worker_thread+0x3d8/0x734
[ 5.410559] kthread+0x1fc/0x214
[ 5.413861] ret_from_fork+0x10/0x20
[ 5.427632] ==================================================================
[ 5.434888] BUG: KASAN: use-after-free in __pci_enable_msi_range+0x208/0x5f0
[ 5.441983] Read of size 2 at addr ffff000826404554 by task kworker/u12:4/81
[ 5.449059]
[ 5.450557] CPU: 1 PID: 81 Comm: kworker/u12:4 Not tainted
5.16.0-rc5-next-20211217 #1
[ 5.458507] Hardware name: ARM Juno development board (r2) (DT)
[ 5.464446] Workqueue: events_unbound deferred_probe_work_func
[ 5.470322] Call trace:
[ 5.472776] dump_backtrace+0x228/0x240
[ 5.476635] show_stack+0x24/0x80
[ 5.479967] dump_stack_lvl+0x8c/0xb8
[ 5.483656] print_address_description.constprop.0+0x74/0x2b8
[ 5.489433] kasan_report+0x1e8/0x250
[ 5.493119] __asan_load2+0x9c/0xc4
[ 5.496629] __pci_enable_msi_range+0x208/0x5f0
[ 5.501184] pci_alloc_irq_vectors_affinity+0x15c/0x1c0
[ 5.506438] pcie_port_device_register+0x1e0/0x564
[ 5.511255] pcie_portdrv_probe+0x5c/0x130
[ 5.515376] local_pci_probe+0x84/0x10c
[ 5.519235] pci_device_probe+0x284/0x300
[ 5.523270] really_probe+0x11c/0x684
[ 5.526956] __driver_probe_device+0x194/0x22c
[ 5.531427] driver_probe_device+0x68/0x150
[ 5.535637] __device_attach_driver+0xf8/0x180
[ 5.540108] bus_for_each_drv+0xf8/0x160
[ 5.544054] __device_attach+0x170/0x294
[ 5.548002] device_initial_probe+0x20/0x30
[ 5.552212] bus_probe_device+0xf4/0x104
[ 5.556159] deferred_probe_work_func+0x108/0x160
[ 5.560890] process_one_work+0x3c8/0x850
[ 5.564923] worker_thread+0x3d8/0x734
[ 5.568693] kthread+0x1fc/0x214
[ 5.571944] ret_from_fork+0x10/0x20
[ 5.575543]
[ 5.577038] Allocated by task 81:
[ 5.580364] kasan_save_stack+0x2c/0x54
[ 5.584223] __kasan_kmalloc+0xac/0x10c
[ 5.588080] kmem_cache_alloc_trace+0x220/0x3e0
[ 5.592633] msi_add_msi_desc+0x64/0x1a0
[ 5.596577] msi_setup_msi_desc+0x1b8/0x210
[ 5.600782] __pci_enable_msi_range+0x3c8/0x5f0
[ 5.605337] pci_alloc_irq_vectors_affinity+0x15c/0x1c0
[ 5.610588] pcie_port_device_register+0x1e0/0x564
[ 5.615405] pcie_portdrv_probe+0x5c/0x130
[ 5.619524] local_pci_probe+0x84/0x10c
[ 5.623382] pci_device_probe+0x284/0x300
[ 5.627415] really_probe+0x11c/0x684
[ 5.631100] __driver_probe_device+0x194/0x22c
[ 5.635571] driver_probe_device+0x68/0x150
[ 5.639779] __device_attach_driver+0xf8/0x180
[ 5.644249] bus_for_each_drv+0xf8/0x160
[ 5.648194] __device_attach+0x170/0x294
[ 5.652141] device_initial_probe+0x20/0x30
[ 5.655485] atkbd serio0: keyboard reset failed on 1c060000.kmi
[ 5.656348] bus_probe_device+0xf4/0x104
[ 5.666210] deferred_probe_work_func+0x108/0x160
[ 5.670941] process_one_work+0x3c8/0x850
[ 5.674971] worker_thread+0x3d8/0x734
[ 5.678740] kthread+0x1fc/0x214
[ 5.681991] ret_from_fork+0x10/0x20
[ 5.685586]
[ 5.687081] Freed by task 81:
[ 5.690058] kasan_save_stack+0x2c/0x54
[ 5.693915] kasan_set_track+0x2c/0x40
[ 5.697684] kasan_set_free_info+0x28/0x50
[ 5.701804] __kasan_slab_free+0x108/0x15c
[ 5.705923] slab_free_freelist_hook+0xc0/0x220
[ 5.710475] kfree+0xe8/0x3e0
[ 5.713459] msi_free_msi_descs_range+0x12c/0x1a0
[ 5.718186] msi_domain_alloc_irqs_descs_locked+0xf0/0x130
[ 5.723700] pci_msi_setup_msi_irqs+0x58/0x80
[ 5.728080] __pci_enable_msi_range+0x428/0x5f0
[ 5.732634] pci_alloc_irq_vectors_affinity+0x15c/0x1c0
[ 5.737885] pcie_port_device_register+0x1e0/0x564
[ 5.742702] pcie_portdrv_probe+0x5c/0x130
[ 5.746821] local_pci_probe+0x84/0x10c
[ 5.750679] pci_device_probe+0x284/0x300
[ 5.754712] really_probe+0x11c/0x684
[ 5.758397] __driver_probe_device+0x194/0x22c
[ 5.762867] driver_probe_device+0x68/0x150
[ 5.767076] __device_attach_driver+0xf8/0x180
[ 5.771545] bus_for_each_drv+0xf8/0x160
[ 5.775491] __device_attach+0x170/0x294
[ 5.779437] device_initial_probe+0x20/0x30
[ 5.783646] bus_probe_device+0xf4/0x104
[ 5.787592] deferred_probe_work_func+0x108/0x160
[ 5.792323] process_one_work+0x3c8/0x850
[ 5.796354] worker_thread+0x3d8/0x734
[ 5.800123] kthread+0x1fc/0x214
[ 5.803373] ret_from_fork+0x10/0x20
[ 5.806968]
[ 5.808462] The buggy address belongs to the object at ffff000826404500
[ 5.808462] which belongs to the cache kmalloc-128 of size 128
[ 5.821018] The buggy address is located 84 bytes inside of
[ 5.821018] 128-byte region [ffff000826404500, ffff000826404580)
[ 5.832708] The buggy address belongs to the page:
[ 5.837513] page:(____ptrval____) refcount:1 mapcount:0
mapping:0000000000000000 index:0x0 pfn:0x8a6404
[ 5.846939] flags: 0xbfffc0000000200(slab|node=0|zone=2|lastcpupid=0xffff)
[ 5.853852] raw: 0bfffc0000000200 0000000000000000 dead000000000122
ffff000800002300
[ 5.861625] raw: 0000000000000000 0000000000100010 00000001ffffffff
0000000000000000
[ 5.869390] page dumped because: kasan: bad access detected
[ 5.874978]
[ 5.876472] Memory state around the buggy address:
[ 5.881279] ffff000826404400: 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
[ 5.888525] ffff000826404480: fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc fc
[ 5.895771] >ffff000826404500: fa fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[ 5.903014] ^
[ 5.908866] ffff000826404580: fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc fc
[ 5.916112] ffff000826404600: 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
[ 5.923356] ==================================================================
[ 5.930596] Disabling lock debugging due to kernel taint
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Test log link,
https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20211217/testrun/6919678/suite/ltp-syscalls-tests/test/add_key05/log
Test results comparison:
https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20211217/testrun/6919678/suite/ltp-syscalls-tests/test/add_key05/history/
meta data:
-----------
git describe: next-20211215 and next-20211217
git_repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
git_sha: 93bf6eee76c0e716f6b32de690b1c52991547bb4
git_short_log: 93bf6eee76c0 (\"Add linux-next specific files for 20211215\")
target_arch: arm64
toolchain: gcc-10
Kconfig: https://builds.tuxbuild.com/22LCvyVwJ8E7fRfLPA2BgPKnWiR/config
vmlinux: https://builds.tuxbuild.com/22PqZcj0pMjg0qWW8Ilyx0MhKOH/vmlinux.xz
System.map :
https://builds.tuxbuild.com/22PqZcj0pMjg0qWW8Ilyx0MhKOH/System.map
build log: https://builds.tuxbuild.com/22LCvyVwJ8E7fRfLPA2BgPKnWiR/
--
Linaro LKFT
https://lkft.linaro.org
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-12-20 9:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-20 9:54 [next] arm64: juno-r2: BUG: KASAN: use-after-free in __pci_enable_msi_range Naresh Kamboju
2021-12-20 9:54 ` Naresh Kamboju
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.