[PATCH 4.14 00/45] 4.14.145-stable review

[PATCH 4.14 00/45] 4.14.145-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.145 release.
There are 45 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri 20 Sep 2019 06:09:47 AM UTC.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.145-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.145-rc1

Linus Torvalds <torvalds@linux-foundation.org>
    x86/build: Add -Wnoaddress-of-packed-member to REALMODE_CFLAGS, to silence GCC9 build warning

Jean Delvare <jdelvare@suse.de>
    nvmem: Use the same permissions for eeprom as for nvmem

Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
    platform/x86: pmc_atom: Add CB4063 Beckhoff Automation board to critclk_systems DMI table

Mario Limonciello <mario.limonciello@dell.com>
    Revert "Bluetooth: btusb: driver to enable the usb-wakeup feature"

Nishka Dasgupta <nishkadg.linux@gmail.com>
    drm/mediatek: mtk_drm_drv.c: Add of_node_put() before goto

Andrew F. Davis <afd@ti.com>
    firmware: ti_sci: Always request response from firmware

Christophe Leroy <christophe.leroy@c-s.fr>
    crypto: talitos - HMAC SNOOP NO AFEU mode requires SW icv checking.

Christophe Leroy <christophe.leroy@c-s.fr>
    crypto: talitos - Do not modify req->cryptlen on decryption.

Christophe Leroy <christophe.leroy@c-s.fr>
    crypto: talitos - fix ECB algs ivsize

Christophe Leroy <christophe.leroy@c-s.fr>
    crypto: talitos - check data blocksize in ablkcipher.

Christophe Leroy <christophe.leroy@c-s.fr>
    crypto: talitos - fix CTR alg blocksize

Christophe Leroy <christophe.leroy@c-s.fr>
    crypto: talitos - check AES key size

Muchun Song <smuchun@gmail.com>
    driver core: Fix use-after-free and double free on glue directory

Richard Weinberger <richard@nod.at>
    ubifs: Correctly use tnc_next() in search_dh_cookie()

Alex Williamson <alex.williamson@redhat.com>
    PCI: Always allow probing with driver_override

Xiaolei Li <xiaolei.li@mediatek.com>
    mtd: rawnand: mtk: Fix wrongly assigned OOB buffer pointer issue

Douglas Anderson <dianders@chromium.org>
    clk: rockchip: Don't yell about bad mmc phases when getting

Neil Armstrong <narmstrong@baylibre.com>
    drm/meson: Add support for XBGR8888 & ABGR8888 formats

Suraj Jitindar Singh <sjitindarsingh@gmail.com>
    powerpc: Add barrier_nospec to raw_copy_in_user()

Paul Burton <paul.burton@mips.com>
    MIPS: VDSO: Use same -m%-float cflag as the kernel proper

Paul Burton <paul.burton@mips.com>
    MIPS: VDSO: Prevent use of smp_processor_id()

Paolo Bonzini <pbonzini@redhat.com>
    KVM: nVMX: handle page fault in vmread

Fuqian Huang <huangfq.daxian@gmail.com>
    KVM: x86: work around leak of uninitialized stack contents

Thomas Huth <thuth@redhat.com>
    KVM: s390: Do not leak kernel stack data in the KVM_S390_INTERRUPT ioctl

Yunfeng Ye <yeyunfeng@huawei.com>
    genirq: Prevent NULL pointer dereference in resend_irqs()

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix assertion failure during fsync and use of stale transaction

Kent Gibson <warthog618@gmail.com>
    gpio: fix line flag validation in lineevent_create

Kent Gibson <warthog618@gmail.com>
    gpio: fix line flag validation in linehandle_create

Hans de Goede <hdegoede@redhat.com>
    gpiolib: acpi: Add gpiolib_acpi_run_edge_events_on_boot option and blacklist

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "MIPS: SiByte: Enable swiotlb for SWARM, LittleSur and BigSur"

Johannes Thumshirn <jthumshirn@suse.de>
    btrfs: correctly validate compression type

David Sterba <dsterba@suse.com>
    btrfs: compression: add helper for type to string conversion

Yang Yingliang <yangyingliang@huawei.com>
    tun: fix use-after-free when register netdev failed

Xin Long <lucien.xin@gmail.com>
    tipc: add NULL pointer check before calling kfree_rcu

Neal Cardwell <ncardwell@google.com>
    tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR

Xin Long <lucien.xin@gmail.com>
    sctp: use transport pf_retrans in sctp_do_8_2_transport_strike

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()'

Cong Wang <xiyou.wangcong@gmail.com>
    sch_hhf: ensure quantum and hhf_non_hh_weight are non-zero

Stefan Chulski <stefanc@marvell.com>
    net: phylink: Fix flow control resolution

Shmulik Ladkani <shmulik@metanetworks.com>
    net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list

Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
    net: Fix null de-reference of device refcount

Eric Biggers <ebiggers@google.com>
    isdn/capi: check message length in capi_write()

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()'

Bjørn Mork <bjorn@mork.no>
    cdc_ether: fix rndis support for Mediatek based smartphones

Nicolas Dichtel <nicolas.dichtel@6wind.com>
    bridge/mdb: remove wrong use of NLM_F_MULTI


-------------

Diffstat:

 Makefile                               |  4 +-
 arch/mips/Kconfig                      |  3 --
 arch/mips/include/asm/smp.h            | 12 +++++-
 arch/mips/sibyte/common/Makefile       |  1 -
 arch/mips/sibyte/common/dma.c          | 14 -------
 arch/mips/vdso/Makefile                |  4 +-
 arch/powerpc/include/asm/uaccess.h     |  1 +
 arch/s390/kvm/interrupt.c              | 10 +++++
 arch/s390/kvm/kvm-s390.c               |  2 +-
 arch/x86/Makefile                      |  1 +
 arch/x86/kvm/vmx.c                     |  7 +++-
 arch/x86/kvm/x86.c                     |  7 ++++
 drivers/base/core.c                    | 53 ++++++++++++++++++++++++++-
 drivers/bluetooth/btusb.c              |  5 ---
 drivers/clk/rockchip/clk-mmc-phase.c   |  4 +-
 drivers/crypto/talitos.c               | 67 +++++++++++++++++++++++++---------
 drivers/firmware/ti_sci.c              |  8 ++--
 drivers/gpio/gpiolib-acpi.c            | 42 +++++++++++++++++++--
 drivers/gpio/gpiolib.c                 | 20 +++++++---
 drivers/gpu/drm/mediatek/mtk_drm_drv.c |  5 ++-
 drivers/gpu/drm/meson/meson_plane.c    | 16 ++++++++
 drivers/isdn/capi/capi.c               | 10 ++++-
 drivers/mtd/nand/mtk_nand.c            | 21 +++++------
 drivers/net/phy/phylink.c              |  6 +--
 drivers/net/tun.c                      | 16 +++++---
 drivers/net/usb/cdc_ether.c            | 13 +++++--
 drivers/nvmem/core.c                   | 15 ++++++--
 drivers/pci/pci-driver.c               |  3 +-
 drivers/platform/x86/pmc_atom.c        |  8 ++++
 fs/btrfs/compression.c                 | 31 ++++++++++++++++
 fs/btrfs/compression.h                 |  3 ++
 fs/btrfs/props.c                       |  6 +--
 fs/btrfs/tree-log.c                    |  8 ++--
 fs/ubifs/tnc.c                         | 16 +++++---
 include/uapi/linux/isdn/capicmd.h      |  1 +
 kernel/irq/resend.c                    |  2 +
 net/bridge/br_mdb.c                    |  2 +-
 net/core/dev.c                         |  2 +
 net/core/skbuff.c                      | 19 ++++++++++
 net/ipv4/tcp_input.c                   |  2 +-
 net/ipv6/ping.c                        |  2 +-
 net/sched/sch_hhf.c                    |  2 +-
 net/sctp/protocol.c                    |  2 +-
 net/sctp/sm_sideeffect.c               |  2 +-
 net/tipc/name_distr.c                  |  3 +-
 45 files changed, 366 insertions(+), 115 deletions(-)

[PATCH 4.14 01/45] bridge/mdb: remove wrong use of NLM_F_MULTI

[Greg Kroah-Hartman]

From: Nicolas Dichtel <nicolas.dichtel@6wind.com>

[ Upstream commit 94a72b3f024fc7e9ab640897a1e38583a470659d ]

NLM_F_MULTI must be used only when a NLMSG_DONE message is sent at the end.
In fact, NLMSG_DONE is sent only at the end of a dump.

Libraries like libnl will wait forever for NLMSG_DONE.

Fixes: 949f1e39a617 ("bridge: mdb: notify on router port add and del")
CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/br_mdb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/bridge/br_mdb.c
+++ b/net/bridge/br_mdb.c
@@ -373,7 +373,7 @@ static int nlmsg_populate_rtr_fill(struc
 	struct nlmsghdr *nlh;
 	struct nlattr *nest;
 
-	nlh = nlmsg_put(skb, pid, seq, type, sizeof(*bpm), NLM_F_MULTI);
+	nlh = nlmsg_put(skb, pid, seq, type, sizeof(*bpm), 0);
 	if (!nlh)
 		return -EMSGSIZE;
 

[PATCH 4.14 02/45] cdc_ether: fix rndis support for Mediatek based smartphones

[Greg Kroah-Hartman]

From: "Bjørn Mork" <bjorn@mork.no>

[ Upstream commit 4d7ffcf3bf1be98d876c570cab8fc31d9fa92725 ]

A Mediatek based smartphone owner reports problems with USB
tethering in Linux.  The verbose USB listing shows a rndis_host
interface pair (e0/01/03 + 10/00/00), but the driver fails to
bind with

[  355.960428] usb 1-4: bad CDC descriptors

The problem is a failsafe test intended to filter out ACM serial
functions using the same 02/02/ff class/subclass/protocol as RNDIS.
The serial functions are recognized by their non-zero bmCapabilities.

No RNDIS function with non-zero bmCapabilities were known at the time
this failsafe was added. But it turns out that some Wireless class
RNDIS functions are using the bmCapabilities field. These functions
are uniquely identified as RNDIS by their class/subclass/protocol, so
the failing test can safely be disabled.  The same applies to the two
types of Misc class RNDIS functions.

Applying the failsafe to Communication class functions only retains
the original functionality, and fixes the problem for the Mediatek based
smartphone.

Tow examples of CDC functional descriptors with non-zero bmCapabilities
from Wireless class RNDIS functions are:

0e8d:000a  Mediatek Crosscall Spider X5 3G Phone

      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x0f
          connection notifications
          sends break
          line coding and serial state
          get/set/clear comm features
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1

and

19d2:1023  ZTE K4201-z

      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1

The Mediatek example is believed to apply to most smartphones with
Mediatek firmware.  The ZTE example is most likely also part of a larger
family of devices/firmwares.

Suggested-by: Lars Melin <larsm17@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/cdc_ether.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -221,9 +221,16 @@ int usbnet_generic_cdc_bind(struct usbne
 		goto bad_desc;
 	}
 skip:
-	if (	rndis &&
-		header.usb_cdc_acm_descriptor &&
-		header.usb_cdc_acm_descriptor->bmCapabilities) {
+	/* Communcation class functions with bmCapabilities are not
+	 * RNDIS.  But some Wireless class RNDIS functions use
+	 * bmCapabilities for their own purpose. The failsafe is
+	 * therefore applied only to Communication class RNDIS
+	 * functions.  The rndis test is redundant, but a cheap
+	 * optimization.
+	 */
+	if (rndis && is_rndis(&intf->cur_altsetting->desc) &&
+	    header.usb_cdc_acm_descriptor &&
+	    header.usb_cdc_acm_descriptor->bmCapabilities) {
 			dev_dbg(&intf->dev,
 				"ACM capabilities %02x, not really RNDIS?\n",
 				header.usb_cdc_acm_descriptor->bmCapabilities);

[PATCH 4.14 03/45] ipv6: Fix the link time qualifier of ping_v6_proc_exit_net()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit d23dbc479a8e813db4161a695d67da0e36557846 ]

The '.exit' functions from 'pernet_operations' structure should be marked
as __net_exit, not __net_init.

Fixes: d862e5461423 ("net: ipv6: Implement /proc/net/icmp6.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ping.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv6/ping.c
+++ b/net/ipv6/ping.c
@@ -233,7 +233,7 @@ static int __net_init ping_v6_proc_init_
 	return ping_proc_register(net, &ping_v6_seq_afinfo);
 }
 
-static void __net_init ping_v6_proc_exit_net(struct net *net)
+static void __net_exit ping_v6_proc_exit_net(struct net *net)
 {
 	return ping_proc_unregister(net, &ping_v6_seq_afinfo);
 }

[PATCH 4.14 04/45] isdn/capi: check message length in capi_write()

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

[ Upstream commit fe163e534e5eecdfd7b5920b0dfd24c458ee85d6 ]

syzbot reported:

    BUG: KMSAN: uninit-value in capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700
    CPU: 0 PID: 10025 Comm: syz-executor379 Not tainted 4.20.0-rc7+ #2
    Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
    Call Trace:
      __dump_stack lib/dump_stack.c:77 [inline]
      dump_stack+0x173/0x1d0 lib/dump_stack.c:113
      kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613
      __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313
      capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700
      do_loop_readv_writev fs/read_write.c:703 [inline]
      do_iter_write+0x83e/0xd80 fs/read_write.c:961
      vfs_writev fs/read_write.c:1004 [inline]
      do_writev+0x397/0x840 fs/read_write.c:1039
      __do_sys_writev fs/read_write.c:1112 [inline]
      __se_sys_writev+0x9b/0xb0 fs/read_write.c:1109
      __x64_sys_writev+0x4a/0x70 fs/read_write.c:1109
      do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
      entry_SYSCALL_64_after_hwframe+0x63/0xe7
    [...]

The problem is that capi_write() is reading past the end of the message.
Fix it by checking the message's length in the needed places.

Reported-and-tested-by: syzbot+0849c524d9c634f5ae66@syzkaller.appspotmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/isdn/capi/capi.c          |   10 +++++++++-
 include/uapi/linux/isdn/capicmd.h |    1 +
 2 files changed, 10 insertions(+), 1 deletion(-)

--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -687,6 +687,9 @@ capi_write(struct file *file, const char
 	if (!cdev->ap.applid)
 		return -ENODEV;
 
+	if (count < CAPIMSG_BASELEN)
+		return -EINVAL;
+
 	skb = alloc_skb(count, GFP_USER);
 	if (!skb)
 		return -ENOMEM;
@@ -697,7 +700,8 @@ capi_write(struct file *file, const char
 	}
 	mlen = CAPIMSG_LEN(skb->data);
 	if (CAPIMSG_CMD(skb->data) == CAPI_DATA_B3_REQ) {
-		if ((size_t)(mlen + CAPIMSG_DATALEN(skb->data)) != count) {
+		if (count < CAPI_DATA_B3_REQ_LEN ||
+		    (size_t)(mlen + CAPIMSG_DATALEN(skb->data)) != count) {
 			kfree_skb(skb);
 			return -EINVAL;
 		}
@@ -710,6 +714,10 @@ capi_write(struct file *file, const char
 	CAPIMSG_SETAPPID(skb->data, cdev->ap.applid);
 
 	if (CAPIMSG_CMD(skb->data) == CAPI_DISCONNECT_B3_RESP) {
+		if (count < CAPI_DISCONNECT_B3_RESP_LEN) {
+			kfree_skb(skb);
+			return -EINVAL;
+		}
 		mutex_lock(&cdev->lock);
 		capincci_free(cdev, CAPIMSG_NCCI(skb->data));
 		mutex_unlock(&cdev->lock);
--- a/include/uapi/linux/isdn/capicmd.h
+++ b/include/uapi/linux/isdn/capicmd.h
@@ -16,6 +16,7 @@
 #define CAPI_MSG_BASELEN		8
 #define CAPI_DATA_B3_REQ_LEN		(CAPI_MSG_BASELEN+4+4+2+2+2)
 #define CAPI_DATA_B3_RESP_LEN		(CAPI_MSG_BASELEN+4+2)
+#define CAPI_DISCONNECT_B3_RESP_LEN	(CAPI_MSG_BASELEN+4)
 
 /*----- CAPI commands -----*/
 #define CAPI_ALERT		    0x01

[PATCH 4.14 05/45] net: Fix null de-reference of device refcount

[Greg Kroah-Hartman]

From: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>

[ Upstream commit 10cc514f451a0f239aa34f91bc9dc954a9397840 ]

In event of failure during register_netdevice, free_netdev is
invoked immediately. free_netdev assumes that all the netdevice
refcounts have been dropped prior to it being called and as a
result frees and clears out the refcount pointer.

However, this is not necessarily true as some of the operations
in the NETDEV_UNREGISTER notifier handlers queue RCU callbacks for
invocation after a grace period. The IPv4 callback in_dev_rcu_put
tries to access the refcount after free_netdev is called which
leads to a null de-reference-

44837.761523:   <6> Unable to handle kernel paging request at
                    virtual address 0000004a88287000
44837.761651:   <2> pc : in_dev_finish_destroy+0x4c/0xc8
44837.761654:   <2> lr : in_dev_finish_destroy+0x2c/0xc8
44837.762393:   <2> Call trace:
44837.762398:   <2>  in_dev_finish_destroy+0x4c/0xc8
44837.762404:   <2>  in_dev_rcu_put+0x24/0x30
44837.762412:   <2>  rcu_nocb_kthread+0x43c/0x468
44837.762418:   <2>  kthread+0x118/0x128
44837.762424:   <2>  ret_from_fork+0x10/0x1c

Fix this by waiting for the completion of the call_rcu() in
case of register_netdevice errors.

Fixes: 93ee31f14f6f ("[NET]: Fix free_netdev on register_netdev failure.")
Cc: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/dev.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -7698,6 +7698,8 @@ int register_netdevice(struct net_device
 	ret = notifier_to_errno(ret);
 	if (ret) {
 		rollback_registered(dev);
+		rcu_barrier();
+
 		dev->reg_state = NETREG_UNREGISTERED;
 	}
 	/*

[PATCH 4.14 06/45] net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list

[Greg Kroah-Hartman]

From: Shmulik Ladkani <shmulik@metanetworks.com>

[ Upstream commit 3dcbdb134f329842a38f0e6797191b885ab00a00 ]

Historically, support for frag_list packets entering skb_segment() was
limited to frag_list members terminating on exact same gso_size
boundaries. This is verified with a BUG_ON since commit 89319d3801d1
("net: Add frag_list support to skb_segment"), quote:

    As such we require all frag_list members terminate on exact MSS
    boundaries.  This is checked using BUG_ON.
    As there should only be one producer in the kernel of such packets,
    namely GRO, this requirement should not be difficult to maintain.

However, since commit 6578171a7ff0 ("bpf: add bpf_skb_change_proto helper"),
the "exact MSS boundaries" assumption no longer holds:
An eBPF program using bpf_skb_change_proto() DOES modify 'gso_size', but
leaves the frag_list members as originally merged by GRO with the
original 'gso_size'. Example of such programs are bpf-based NAT46 or
NAT64.

This lead to a kernel BUG_ON for flows involving:
 - GRO generating a frag_list skb
 - bpf program performing bpf_skb_change_proto() or bpf_skb_adjust_room()
 - skb_segment() of the skb

See example BUG_ON reports in [0].

In commit 13acc94eff12 ("net: permit skb_segment on head_frag frag_list skb"),
skb_segment() was modified to support the "gso_size mangling" case of
a frag_list GRO'ed skb, but *only* for frag_list members having
head_frag==true (having a page-fragment head).

Alas, GRO packets having frag_list members with a linear kmalloced head
(head_frag==false) still hit the BUG_ON.

This commit adds support to skb_segment() for a 'head_skb' packet having
a frag_list whose members are *non* head_frag, with gso_size mangled, by
disabling SG and thus falling-back to copying the data from the given
'head_skb' into the generated segmented skbs - as suggested by Willem de
Bruijn [1].

Since this approach involves the penalty of skb_copy_and_csum_bits()
when building the segments, care was taken in order to enable this
solution only when required:
 - untrusted gso_size, by testing SKB_GSO_DODGY is set
   (SKB_GSO_DODGY is set by any gso_size mangling functions in
    net/core/filter.c)
 - the frag_list is non empty, its item is a non head_frag, *and* the
   headlen of the given 'head_skb' does not match the gso_size.

[0]
https://lore.kernel.org/netdev/20190826170724.25ff616f@pixies/
https://lore.kernel.org/netdev/9265b93f-253d-6b8c-f2b8-4b54eff1835c@fb.com/

[1]
https://lore.kernel.org/netdev/CA+FuTSfVsgNDi7c=GUU8nMg2hWxF2SjCNLXetHeVPdnxAW5K-w@mail.gmail.com/

Fixes: 6578171a7ff0 ("bpf: add bpf_skb_change_proto helper")
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/skbuff.c |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -3514,6 +3514,25 @@ struct sk_buff *skb_segment(struct sk_bu
 	int pos;
 	int dummy;
 
+	if (list_skb && !list_skb->head_frag && skb_headlen(list_skb) &&
+	    (skb_shinfo(head_skb)->gso_type & SKB_GSO_DODGY)) {
+		/* gso_size is untrusted, and we have a frag_list with a linear
+		 * non head_frag head.
+		 *
+		 * (we assume checking the first list_skb member suffices;
+		 * i.e if either of the list_skb members have non head_frag
+		 * head, then the first one has too).
+		 *
+		 * If head_skb's headlen does not fit requested gso_size, it
+		 * means that the frag_list members do NOT terminate on exact
+		 * gso_size boundaries. Hence we cannot perform skb_frag_t page
+		 * sharing. Therefore we must fallback to copying the frag_list
+		 * skbs; we do so by disabling SG.
+		 */
+		if (mss != GSO_BY_FRAGS && mss != skb_headlen(head_skb))
+			features &= ~NETIF_F_SG;
+	}
+
 	__skb_push(head_skb, doffset);
 	proto = skb_network_protocol(head_skb, &dummy);
 	if (unlikely(!proto))

[PATCH 4.14 07/45] net: phylink: Fix flow control resolution

[Greg Kroah-Hartman]

From: Stefan Chulski <stefanc@marvell.com>

[ Upstream commit 63b2ed4e10b2e6c913e1d8cdd728e7fba4115a3d ]

Regarding to IEEE 802.3-2015 standard section 2
28B.3 Priority resolution - Table 28-3 - Pause resolution

In case of Local device Pause=1 AsymDir=0, Link partner
Pause=1 AsymDir=1, Local device resolution should be enable PAUSE
transmit, disable PAUSE receive.
And in case of Local device Pause=1 AsymDir=1, Link partner
Pause=1 AsymDir=0, Local device resolution should be enable PAUSE
receive, disable PAUSE transmit.

Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Reported-by: Shaul Ben-Mayor <shaulb@marvell.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/phylink.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -359,8 +359,8 @@ static void phylink_get_fixed_state(stru
  *  Local device  Link partner
  *  Pause AsymDir Pause AsymDir Result
  *    1     X       1     X     TX+RX
- *    0     1       1     1     RX
- *    1     1       0     1     TX
+ *    0     1       1     1     TX
+ *    1     1       0     1     RX
  */
 static void phylink_resolve_flow(struct phylink *pl,
 	struct phylink_link_state *state)
@@ -381,7 +381,7 @@ static void phylink_resolve_flow(struct
 			new_pause = MLO_PAUSE_TX | MLO_PAUSE_RX;
 		else if (pause & MLO_PAUSE_ASYM)
 			new_pause = state->pause & MLO_PAUSE_SYM ?
-				 MLO_PAUSE_RX : MLO_PAUSE_TX;
+				 MLO_PAUSE_TX : MLO_PAUSE_RX;
 	} else {
 		new_pause = pl->link_config.pause & MLO_PAUSE_TXRX_MASK;
 	}

[PATCH 4.14 08/45] sch_hhf: ensure quantum and hhf_non_hh_weight are non-zero

[Greg Kroah-Hartman]

From: Cong Wang <xiyou.wangcong@gmail.com>

[ Upstream commit d4d6ec6dac07f263f06d847d6f732d6855522845 ]

In case of TCA_HHF_NON_HH_WEIGHT or TCA_HHF_QUANTUM is zero,
it would make no progress inside the loop in hhf_dequeue() thus
kernel would get stuck.

Fix this by checking this corner case in hhf_change().

Fixes: 10239edf86f1 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
Reported-by: syzbot+bc6297c11f19ee807dc2@syzkaller.appspotmail.com
Reported-by: syzbot+041483004a7f45f1f20a@syzkaller.appspotmail.com
Reported-by: syzbot+55be5f513bed37fc4367@syzkaller.appspotmail.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Terry Lam <vtlam@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_hhf.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/sched/sch_hhf.c
+++ b/net/sched/sch_hhf.c
@@ -528,7 +528,7 @@ static int hhf_change(struct Qdisc *sch,
 		new_hhf_non_hh_weight = nla_get_u32(tb[TCA_HHF_NON_HH_WEIGHT]);
 
 	non_hh_quantum = (u64)new_quantum * new_hhf_non_hh_weight;
-	if (non_hh_quantum > INT_MAX)
+	if (non_hh_quantum == 0 || non_hh_quantum > INT_MAX)
 		return -EINVAL;
 
 	sch_tree_lock(sch);

[PATCH 4.14 09/45] sctp: Fix the link time qualifier of sctp_ctrlsock_exit()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit b456d72412ca8797234449c25815e82f4e1426c0 ]

The '.exit' functions from 'pernet_operations' structure should be marked
as __net_exit, not __net_init.

Fixes: 8e2d61e0aed2 ("sctp: fix race on protocol/netns initialization")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/protocol.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -1344,7 +1344,7 @@ static int __net_init sctp_ctrlsock_init
 	return status;
 }
 
-static void __net_init sctp_ctrlsock_exit(struct net *net)
+static void __net_exit sctp_ctrlsock_exit(struct net *net)
 {
 	/* Free the control endpoint.  */
 	inet_ctl_sock_destroy(net->sctp.ctl_sock);

[PATCH 4.14 10/45] sctp: use transport pf_retrans in sctp_do_8_2_transport_strike

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 10eb56c582c557c629271f1ee31e15e7a9b2558b ]

Transport should use its own pf_retrans to do the error_count
check, instead of asoc's. Otherwise, it's meaningless to make
pf_retrans per transport.

Fixes: 5aa93bcf66f4 ("sctp: Implement quick failover draft from tsvwg")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/sm_sideeffect.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -542,7 +542,7 @@ static void sctp_do_8_2_transport_strike
 	if (net->sctp.pf_enable &&
 	   (transport->state == SCTP_ACTIVE) &&
 	   (transport->error_count < transport->pathmaxrxt) &&
-	   (transport->error_count > asoc->pf_retrans)) {
+	   (transport->error_count > transport->pf_retrans)) {
 
 		sctp_assoc_control_transport(asoc, transport,
 					     SCTP_TRANSPORT_PF,

[PATCH 4.14 11/45] tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR

[Greg Kroah-Hartman]

From: Neal Cardwell <ncardwell@google.com>

[ Upstream commit af38d07ed391b21f7405fa1f936ca9686787d6d2 ]

Fix tcp_ecn_withdraw_cwr() to clear the correct bit:
TCP_ECN_QUEUE_CWR.

Rationale: basically, TCP_ECN_DEMAND_CWR is a bit that is purely about
the behavior of data receivers, and deciding whether to reflect
incoming IP ECN CE marks as outgoing TCP th->ece marks. The
TCP_ECN_QUEUE_CWR bit is purely about the behavior of data senders,
and deciding whether to send CWR. The tcp_ecn_withdraw_cwr() function
is only called from tcp_undo_cwnd_reduction() by data senders during
an undo, so it should zero the sender-side state,
TCP_ECN_QUEUE_CWR. It does not make sense to stop the reflection of
incoming CE bits on incoming data packets just because outgoing
packets were spuriously retransmitted.

The bug has been reproduced with packetdrill to manifest in a scenario
with RFC3168 ECN, with an incoming data packet with CE bit set and
carrying a TCP timestamp value that causes cwnd undo. Before this fix,
the IP CE bit was ignored and not reflected in the TCP ECE header bit,
and sender sent a TCP CWR ('W') bit on the next outgoing data packet,
even though the cwnd reduction had been undone.  After this fix, the
sender properly reflects the CE bit and does not set the W bit.

Note: the bug actually predates 2005 git history; this Fixes footer is
chosen to be the oldest SHA1 I have tested (from Sep 2007) for which
the patch applies cleanly (since before this commit the code was in a
.h file).

Fixes: bdf1ee5d3bd3 ("[TCP]: Move code from tcp_ecn.h to tcp*.c and tcp.h & remove it")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_input.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -247,7 +247,7 @@ static void tcp_ecn_accept_cwr(struct tc
 
 static void tcp_ecn_withdraw_cwr(struct tcp_sock *tp)
 {
-	tp->ecn_flags &= ~TCP_ECN_DEMAND_CWR;
+	tp->ecn_flags &= ~TCP_ECN_QUEUE_CWR;
 }
 
 static void __tcp_ecn_check_ce(struct sock *sk, const struct sk_buff *skb)

[PATCH 4.14 12/45] tipc: add NULL pointer check before calling kfree_rcu

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 42dec1dbe38239cf91cc1f4df7830c66276ced37 ]

Unlike kfree(p), kfree_rcu(p, rcu) won't do NULL pointer check. When
tipc_nametbl_remove_publ returns NULL, the panic below happens:

   BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
   RIP: 0010:__call_rcu+0x1d/0x290
   Call Trace:
    <IRQ>
    tipc_publ_notify+0xa9/0x170 [tipc]
    tipc_node_write_unlock+0x8d/0x100 [tipc]
    tipc_node_link_down+0xae/0x1d0 [tipc]
    tipc_node_check_dest+0x3ea/0x8f0 [tipc]
    ? tipc_disc_rcv+0x2c7/0x430 [tipc]
    tipc_disc_rcv+0x2c7/0x430 [tipc]
    ? tipc_rcv+0x6bb/0xf20 [tipc]
    tipc_rcv+0x6bb/0xf20 [tipc]
    ? ip_route_input_slow+0x9cf/0xb10
    tipc_udp_recv+0x195/0x1e0 [tipc]
    ? tipc_udp_is_known_peer+0x80/0x80 [tipc]
    udp_queue_rcv_skb+0x180/0x460
    udp_unicast_rcv_skb.isra.56+0x75/0x90
    __udp4_lib_rcv+0x4ce/0xb90
    ip_local_deliver_finish+0x11c/0x210
    ip_local_deliver+0x6b/0xe0
    ? ip_rcv_finish+0xa9/0x410
    ip_rcv+0x273/0x362

Fixes: 97ede29e80ee ("tipc: convert name table read-write lock to RCU")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/tipc/name_distr.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/tipc/name_distr.c
+++ b/net/tipc/name_distr.c
@@ -224,7 +224,8 @@ static void tipc_publ_purge(struct net *
 		       publ->key);
 	}
 
-	kfree_rcu(p, rcu);
+	if (p)
+		kfree_rcu(p, rcu);
 }
 
 /**

[PATCH 4.14 13/45] tun: fix use-after-free when register netdev failed

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 77f22f92dff8e7b45c7786a430626d38071d4670 ]

I got a UAF repport in tun driver when doing fuzzy test:

[  466.269490] ==================================================================
[  466.271792] BUG: KASAN: use-after-free in tun_chr_read_iter+0x2ca/0x2d0
[  466.271806] Read of size 8 at addr ffff888372139250 by task tun-test/2699
[  466.271810]
[  466.271824] CPU: 1 PID: 2699 Comm: tun-test Not tainted 5.3.0-rc1-00001-g5a9433db2614-dirty #427
[  466.271833] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[  466.271838] Call Trace:
[  466.271858]  dump_stack+0xca/0x13e
[  466.271871]  ? tun_chr_read_iter+0x2ca/0x2d0
[  466.271890]  print_address_description+0x79/0x440
[  466.271906]  ? vprintk_func+0x5e/0xf0
[  466.271920]  ? tun_chr_read_iter+0x2ca/0x2d0
[  466.271935]  __kasan_report+0x15c/0x1df
[  466.271958]  ? tun_chr_read_iter+0x2ca/0x2d0
[  466.271976]  kasan_report+0xe/0x20
[  466.271987]  tun_chr_read_iter+0x2ca/0x2d0
[  466.272013]  do_iter_readv_writev+0x4b7/0x740
[  466.272032]  ? default_llseek+0x2d0/0x2d0
[  466.272072]  do_iter_read+0x1c5/0x5e0
[  466.272110]  vfs_readv+0x108/0x180
[  466.299007]  ? compat_rw_copy_check_uvector+0x440/0x440
[  466.299020]  ? fsnotify+0x888/0xd50
[  466.299040]  ? __fsnotify_parent+0xd0/0x350
[  466.299064]  ? fsnotify_first_mark+0x1e0/0x1e0
[  466.304548]  ? vfs_write+0x264/0x510
[  466.304569]  ? ksys_write+0x101/0x210
[  466.304591]  ? do_preadv+0x116/0x1a0
[  466.304609]  do_preadv+0x116/0x1a0
[  466.309829]  do_syscall_64+0xc8/0x600
[  466.309849]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  466.309861] RIP: 0033:0x4560f9
[  466.309875] Code: 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
[  466.309889] RSP: 002b:00007ffffa5166e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000127
[  466.322992] RAX: ffffffffffffffda RBX: 0000000000400460 RCX: 00000000004560f9
[  466.322999] RDX: 0000000000000003 RSI: 00000000200008c0 RDI: 0000000000000003
[  466.323007] RBP: 00007ffffa516700 R08: 0000000000000004 R09: 0000000000000000
[  466.323014] R10: 0000000000000000 R11: 0000000000000206 R12: 000000000040cb10
[  466.323021] R13: 0000000000000000 R14: 00000000006d7018 R15: 0000000000000000
[  466.323057]
[  466.323064] Allocated by task 2605:
[  466.335165]  save_stack+0x19/0x80
[  466.336240]  __kasan_kmalloc.constprop.8+0xa0/0xd0
[  466.337755]  kmem_cache_alloc+0xe8/0x320
[  466.339050]  getname_flags+0xca/0x560
[  466.340229]  user_path_at_empty+0x2c/0x50
[  466.341508]  vfs_statx+0xe6/0x190
[  466.342619]  __do_sys_newstat+0x81/0x100
[  466.343908]  do_syscall_64+0xc8/0x600
[  466.345303]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  466.347034]
[  466.347517] Freed by task 2605:
[  466.348471]  save_stack+0x19/0x80
[  466.349476]  __kasan_slab_free+0x12e/0x180
[  466.350726]  kmem_cache_free+0xc8/0x430
[  466.351874]  putname+0xe2/0x120
[  466.352921]  filename_lookup+0x257/0x3e0
[  466.354319]  vfs_statx+0xe6/0x190
[  466.355498]  __do_sys_newstat+0x81/0x100
[  466.356889]  do_syscall_64+0xc8/0x600
[  466.358037]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  466.359567]
[  466.360050] The buggy address belongs to the object at ffff888372139100
[  466.360050]  which belongs to the cache names_cache of size 4096
[  466.363735] The buggy address is located 336 bytes inside of
[  466.363735]  4096-byte region [ffff888372139100, ffff88837213a100)
[  466.367179] The buggy address belongs to the page:
[  466.368604] page:ffffea000dc84e00 refcount:1 mapcount:0 mapping:ffff8883df1b4f00 index:0x0 compound_mapcount: 0
[  466.371582] flags: 0x2fffff80010200(slab|head)
[  466.372910] raw: 002fffff80010200 dead000000000100 dead000000000122 ffff8883df1b4f00
[  466.375209] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
[  466.377778] page dumped because: kasan: bad access detected
[  466.379730]
[  466.380288] Memory state around the buggy address:
[  466.381844]  ffff888372139100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.384009]  ffff888372139180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.386131] >ffff888372139200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.388257]                                                  ^
[  466.390234]  ffff888372139280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.392512]  ffff888372139300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.394667] ==================================================================

tun_chr_read_iter() accessed the memory which freed by free_netdev()
called by tun_set_iff():

        CPUA                                           CPUB
  tun_set_iff()
    alloc_netdev_mqs()
    tun_attach()
                                                  tun_chr_read_iter()
                                                    tun_get()
                                                    tun_do_read()
                                                      tun_ring_recv()
    register_netdevice() <-- inject error
    goto err_detach
    tun_detach_all() <-- set RCV_SHUTDOWN
    free_netdev() <-- called from
                     err_free_dev path
      netdev_freemem() <-- free the memory
                        without check refcount
      (In this path, the refcount cannot prevent
       freeing the memory of dev, and the memory
       will be used by dev_put() called by
       tun_chr_read_iter() on CPUB.)
                                                     (Break from tun_ring_recv(),
                                                     because RCV_SHUTDOWN is set)
                                                   tun_put()
                                                     dev_put() <-- use the memory
                                                                   freed by netdev_freemem()

Put the publishing of tfile->tun after register_netdevice(),
so tun_get() won't get the tun pointer that freed by
err_detach path if register_netdevice() failed.

Fixes: eb0fb363f920 ("tuntap: attach queue 0 before registering netdevice")
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/tun.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -630,7 +630,8 @@ static void tun_detach_all(struct net_de
 		module_put(THIS_MODULE);
 }
 
-static int tun_attach(struct tun_struct *tun, struct file *file, bool skip_filter)
+static int tun_attach(struct tun_struct *tun, struct file *file,
+		      bool skip_filter, bool publish_tun)
 {
 	struct tun_file *tfile = file->private_data;
 	struct net_device *dev = tun->dev;
@@ -672,7 +673,8 @@ static int tun_attach(struct tun_struct
 
 	tfile->queue_index = tun->numqueues;
 	tfile->socket.sk->sk_shutdown &= ~RCV_SHUTDOWN;
-	rcu_assign_pointer(tfile->tun, tun);
+	if (publish_tun)
+		rcu_assign_pointer(tfile->tun, tun);
 	rcu_assign_pointer(tun->tfiles[tun->numqueues], tfile);
 	tun->numqueues++;
 
@@ -2011,7 +2013,7 @@ static int tun_set_iff(struct net *net,
 		if (err < 0)
 			return err;
 
-		err = tun_attach(tun, file, ifr->ifr_flags & IFF_NOFILTER);
+		err = tun_attach(tun, file, ifr->ifr_flags & IFF_NOFILTER, true);
 		if (err < 0)
 			return err;
 
@@ -2100,13 +2102,17 @@ static int tun_set_iff(struct net *net,
 				       NETIF_F_HW_VLAN_STAG_TX);
 
 		INIT_LIST_HEAD(&tun->disabled);
-		err = tun_attach(tun, file, false);
+		err = tun_attach(tun, file, false, false);
 		if (err < 0)
 			goto err_free_flow;
 
 		err = register_netdevice(tun->dev);
 		if (err < 0)
 			goto err_detach;
+		/* free_netdev() won't check refcnt, to aovid race
+		 * with dev_put() we need publish tun after registration.
+		 */
+		rcu_assign_pointer(tfile->tun, tun);
 	}
 
 	netif_carrier_on(tun->dev);
@@ -2252,7 +2258,7 @@ static int tun_set_queue(struct file *fi
 		ret = security_tun_dev_attach_queue(tun->security);
 		if (ret < 0)
 			goto unlock;
-		ret = tun_attach(tun, file, false);
+		ret = tun_attach(tun, file, false, true);
 	} else if (ifr->ifr_flags & IFF_DETACH_QUEUE) {
 		tun = rtnl_dereference(tfile->tun);
 		if (!tun || !(tun->flags & IFF_MULTI_QUEUE) || tfile->detached)

[PATCH 4.14 14/45] btrfs: compression: add helper for type to string conversion

[Greg Kroah-Hartman]

From: David Sterba <dsterba@suse.com>

commit e128f9c3f7242318e1c76d204c7ae32bc878b8c7 upstream.

There are several places opencoding this conversion, add a helper now
that we have 3 compression algorithms.

Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/compression.c |   15 +++++++++++++++
 fs/btrfs/compression.h |    2 ++
 2 files changed, 17 insertions(+)

--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -43,6 +43,21 @@
 #include "extent_io.h"
 #include "extent_map.h"
 
+static const char* const btrfs_compress_types[] = { "", "zlib", "lzo", "zstd" };
+
+const char* btrfs_compress_type2str(enum btrfs_compression_type type)
+{
+	switch (type) {
+	case BTRFS_COMPRESS_ZLIB:
+	case BTRFS_COMPRESS_LZO:
+	case BTRFS_COMPRESS_ZSTD:
+	case BTRFS_COMPRESS_NONE:
+		return btrfs_compress_types[type];
+	}
+
+	return NULL;
+}
+
 static int btrfs_decompress_bio(struct compressed_bio *cb);
 
 static inline int compressed_bio_size(struct btrfs_fs_info *fs_info,
--- a/fs/btrfs/compression.h
+++ b/fs/btrfs/compression.h
@@ -130,6 +130,8 @@ extern const struct btrfs_compress_op bt
 extern const struct btrfs_compress_op btrfs_lzo_compress;
 extern const struct btrfs_compress_op btrfs_zstd_compress;
 
+const char* btrfs_compress_type2str(enum btrfs_compression_type type);
+
 int btrfs_compress_heuristic(struct inode *inode, u64 start, u64 end);
 
 #endif

[PATCH 4.14 15/45] btrfs: correctly validate compression type

[Greg Kroah-Hartman]

From: Johannes Thumshirn <jthumshirn@suse.de>

commit aa53e3bfac7205fb3a8815ac1c937fd6ed01b41e upstream.

Nikolay reported the following KASAN splat when running btrfs/048:

[ 1843.470920] ==================================================================
[ 1843.471971] BUG: KASAN: slab-out-of-bounds in strncmp+0x66/0xb0
[ 1843.472775] Read of size 1 at addr ffff888111e369e2 by task btrfs/3979

[ 1843.473904] CPU: 3 PID: 3979 Comm: btrfs Not tainted 5.2.0-rc3-default #536
[ 1843.475009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1843.476322] Call Trace:
[ 1843.476674]  dump_stack+0x7c/0xbb
[ 1843.477132]  ? strncmp+0x66/0xb0
[ 1843.477587]  print_address_description+0x114/0x320
[ 1843.478256]  ? strncmp+0x66/0xb0
[ 1843.478740]  ? strncmp+0x66/0xb0
[ 1843.479185]  __kasan_report+0x14e/0x192
[ 1843.479759]  ? strncmp+0x66/0xb0
[ 1843.480209]  kasan_report+0xe/0x20
[ 1843.480679]  strncmp+0x66/0xb0
[ 1843.481105]  prop_compression_validate+0x24/0x70
[ 1843.481798]  btrfs_xattr_handler_set_prop+0x65/0x160
[ 1843.482509]  __vfs_setxattr+0x71/0x90
[ 1843.483012]  __vfs_setxattr_noperm+0x84/0x130
[ 1843.483606]  vfs_setxattr+0xac/0xb0
[ 1843.484085]  setxattr+0x18c/0x230
[ 1843.484546]  ? vfs_setxattr+0xb0/0xb0
[ 1843.485048]  ? __mod_node_page_state+0x1f/0xa0
[ 1843.485672]  ? _raw_spin_unlock+0x24/0x40
[ 1843.486233]  ? __handle_mm_fault+0x988/0x1290
[ 1843.486823]  ? lock_acquire+0xb4/0x1e0
[ 1843.487330]  ? lock_acquire+0xb4/0x1e0
[ 1843.487842]  ? mnt_want_write_file+0x3c/0x80
[ 1843.488442]  ? debug_lockdep_rcu_enabled+0x22/0x40
[ 1843.489089]  ? rcu_sync_lockdep_assert+0xe/0x70
[ 1843.489707]  ? __sb_start_write+0x158/0x200
[ 1843.490278]  ? mnt_want_write_file+0x3c/0x80
[ 1843.490855]  ? __mnt_want_write+0x98/0xe0
[ 1843.491397]  __x64_sys_fsetxattr+0xba/0xe0
[ 1843.492201]  ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 1843.493201]  do_syscall_64+0x6c/0x230
[ 1843.493988]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1843.495041] RIP: 0033:0x7fa7a8a7707a
[ 1843.495819] Code: 48 8b 0d 21 de 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 be 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ee dd 2b 00 f7 d8 64 89 01 48
[ 1843.499203] RSP: 002b:00007ffcb73bca38 EFLAGS: 00000202 ORIG_RAX: 00000000000000be
[ 1843.500210] RAX: ffffffffffffffda RBX: 00007ffcb73bda9d RCX: 00007fa7a8a7707a
[ 1843.501170] RDX: 00007ffcb73bda9d RSI: 00000000006dc050 RDI: 0000000000000003
[ 1843.502152] RBP: 00000000006dc050 R08: 0000000000000000 R09: 0000000000000000
[ 1843.503109] R10: 0000000000000002 R11: 0000000000000202 R12: 00007ffcb73bda91
[ 1843.504055] R13: 0000000000000003 R14: 00007ffcb73bda82 R15: ffffffffffffffff

[ 1843.505268] Allocated by task 3979:
[ 1843.505771]  save_stack+0x19/0x80
[ 1843.506211]  __kasan_kmalloc.constprop.5+0xa0/0xd0
[ 1843.506836]  setxattr+0xeb/0x230
[ 1843.507264]  __x64_sys_fsetxattr+0xba/0xe0
[ 1843.507886]  do_syscall_64+0x6c/0x230
[ 1843.508429]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

[ 1843.509558] Freed by task 0:
[ 1843.510188] (stack is not available)

[ 1843.511309] The buggy address belongs to the object at ffff888111e369e0
                which belongs to the cache kmalloc-8 of size 8
[ 1843.514095] The buggy address is located 2 bytes inside of
                8-byte region [ffff888111e369e0, ffff888111e369e8)
[ 1843.516524] The buggy address belongs to the page:
[ 1843.517561] page:ffff88813f478d80 refcount:1 mapcount:0 mapping:ffff88811940c300 index:0xffff888111e373b8 compound_mapcount: 0
[ 1843.519993] flags: 0x4404000010200(slab|head)
[ 1843.520951] raw: 0004404000010200 ffff88813f48b008 ffff888119403d50 ffff88811940c300
[ 1843.522616] raw: ffff888111e373b8 000000000016000f 00000001ffffffff 0000000000000000
[ 1843.524281] page dumped because: kasan: bad access detected

[ 1843.525936] Memory state around the buggy address:
[ 1843.526975]  ffff888111e36880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.528479]  ffff888111e36900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.530138] >ffff888111e36980: fc fc fc fc fc fc fc fc fc fc fc fc 02 fc fc fc
[ 1843.531877]                                                        ^
[ 1843.533287]  ffff888111e36a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.534874]  ffff888111e36a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.536468] ==================================================================

This is caused by supplying a too short compression value ('lz') in the
test-case and comparing it to 'lzo' with strncmp() and a length of 3.
strncmp() read past the 'lz' when looking for the 'o' and thus caused an
out-of-bounds read.

Introduce a new check 'btrfs_compress_is_valid_type()' which not only
checks the user-supplied value against known compression types, but also
employs checks for too short values.


Reported-by: Nikolay Borisov <nborisov@suse.com>
Fixes: 272e5326c783 ("btrfs: prop: fix vanished compression property after failed set")
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/compression.c |   16 ++++++++++++++++
 fs/btrfs/compression.h |    1 +
 fs/btrfs/props.c       |    6 +-----
 3 files changed, 18 insertions(+), 5 deletions(-)

--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -58,6 +58,22 @@ const char* btrfs_compress_type2str(enum
 	return NULL;
 }
 
+bool btrfs_compress_is_valid_type(const char *str, size_t len)
+{
+	int i;
+
+	for (i = 1; i < ARRAY_SIZE(btrfs_compress_types); i++) {
+		size_t comp_len = strlen(btrfs_compress_types[i]);
+
+		if (len < comp_len)
+			continue;
+
+		if (!strncmp(btrfs_compress_types[i], str, comp_len))
+			return true;
+	}
+	return false;
+}
+
 static int btrfs_decompress_bio(struct compressed_bio *cb);
 
 static inline int compressed_bio_size(struct btrfs_fs_info *fs_info,
--- a/fs/btrfs/compression.h
+++ b/fs/btrfs/compression.h
@@ -131,6 +131,7 @@ extern const struct btrfs_compress_op bt
 extern const struct btrfs_compress_op btrfs_zstd_compress;
 
 const char* btrfs_compress_type2str(enum btrfs_compression_type type);
+bool btrfs_compress_is_valid_type(const char *str, size_t len);
 
 int btrfs_compress_heuristic(struct inode *inode, u64 start, u64 end);
 
--- a/fs/btrfs/props.c
+++ b/fs/btrfs/props.c
@@ -386,11 +386,7 @@ int btrfs_subvol_inherit_props(struct bt
 
 static int prop_compression_validate(const char *value, size_t len)
 {
-	if (!strncmp("lzo", value, 3))
-		return 0;
-	else if (!strncmp("zlib", value, 4))
-		return 0;
-	else if (!strncmp("zstd", value, 4))
+	if (btrfs_compress_is_valid_type(value, len))
 		return 0;
 
 	return -EINVAL;

[PATCH 4.14 16/45] Revert "MIPS: SiByte: Enable swiotlb for SWARM, LittleSur and BigSur"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit c85acbf72786a5901a2170b2145761ed7cf06429 which is
commit e4849aff1e169b86c561738daf8ff020e9de1011 upstream

Guenter writes:
	Upstream commit e4849aff1e16 ("MIPS: SiByte: Enable swiotlb for SWARM,
	LittleSur and BigSur") results in build failures in v4.4.y and v4.14.y.

	make bigsur_defconfig:

	warning: (SIBYTE_SWARM && SIBYTE_SENTOSA && SIBYTE_BIGSUR && SWIOTLB_XEN && AMD_IOMMU) selects SWIOTLB which has unmet direct dependencies (CAVIUM_OCTEON_SOC || MACH_LOONGSON64 && CPU_LOONGSON3 || NLM_XLP_BOARD || NLM_XLR_BOARD)
	warning: (SIBYTE_SWARM && SIBYTE_SENTOSA && SIBYTE_BIGSUR && SWIOTLB_XEN && AMD_IOMMU) selects SWIOTLB which has unmet direct dependencies (CAVIUM_OCTEON_SOC || MACH_LOONGSON64 && CPU_LOONGSON3 || NLM_XLP_BOARD || NLM_XLR_BOARD)

	and the actual build:

	lib/swiotlb.o: In function `swiotlb_tbl_map_single':
	(.text+0x1c0): undefined reference to `iommu_is_span_boundary'
	Makefile:1021: recipe for target 'vmlinux' failed

Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/Kconfig                |    3 ---
 arch/mips/sibyte/common/Makefile |    1 -
 arch/mips/sibyte/common/dma.c    |   14 --------------
 3 files changed, 18 deletions(-)
 delete mode 100644 arch/mips/sibyte/common/dma.c

--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -800,7 +800,6 @@ config SIBYTE_SWARM
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select ZONE_DMA32 if 64BIT
-	select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
 
 config SIBYTE_LITTLESUR
 	bool "Sibyte BCM91250C2-LittleSur"
@@ -823,7 +822,6 @@ config SIBYTE_SENTOSA
 	select SYS_HAS_CPU_SB1
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
 
 config SIBYTE_BIGSUR
 	bool "Sibyte BCM91480B-BigSur"
@@ -837,7 +835,6 @@ config SIBYTE_BIGSUR
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select ZONE_DMA32 if 64BIT
-	select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
 
 config SNI_RM
 	bool "SNI RM200/300/400"
--- a/arch/mips/sibyte/common/Makefile
+++ b/arch/mips/sibyte/common/Makefile
@@ -1,5 +1,4 @@
 obj-y := cfe.o
-obj-$(CONFIG_SWIOTLB)			+= dma.o
 obj-$(CONFIG_SIBYTE_BUS_WATCHER)	+= bus_watcher.o
 obj-$(CONFIG_SIBYTE_CFE_CONSOLE)	+= cfe_console.o
 obj-$(CONFIG_SIBYTE_TBPROF)		+= sb_tbprof.o
--- a/arch/mips/sibyte/common/dma.c
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *	DMA support for Broadcom SiByte platforms.
- *
- *	Copyright (c) 2018  Maciej W. Rozycki
- */
-
-#include <linux/swiotlb.h>
-#include <asm/bootinfo.h>
-
-void __init plat_swiotlb_setup(void)
-{
-	swiotlb_init(1);
-}

[PATCH 4.14 17/45] gpiolib: acpi: Add gpiolib_acpi_run_edge_events_on_boot option and blacklist

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

commit 61f7f7c8f978b1c0d80e43c83b7d110ca0496eb4 upstream.

Another day; another DSDT bug we need to workaround...

Since commit ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events
at least once on boot") we call _AEI edge handlers at boot.

In some rare cases this causes problems. One example of this is the Minix
Neo Z83-4 mini PC, this device has a clear DSDT bug where it has some copy
and pasted code for dealing with Micro USB-B connector host/device role
switching, while the mini PC does not even have a micro-USB connector.
This code, which should not be there, messes with the DDC data pin from
the HDMI connector (switching it to GPIO mode) breaking HDMI support.

To avoid problems like this, this commit adds a new
gpiolib_acpi.run_edge_events_on_boot kernel commandline option, which
allows disabling the running of _AEI edge event handlers at boot.

The default value is -1/auto which uses a DMI based blacklist, the initial
version of this blacklist contains the Neo Z83-4 fixing the HDMI breakage.

Cc: stable@vger.kernel.org
Cc: Daniel Drake <drake@endlessm.com>
Cc: Ian W MORRISON <ianwmorrison@gmail.com>
Reported-by: Ian W MORRISON <ianwmorrison@gmail.com>
Suggested-by: Ian W MORRISON <ianwmorrison@gmail.com>
Fixes: ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events at least once on boot")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20190827202835.213456-1-hdegoede@redhat.com
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ian W MORRISON <ianwmorrison@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpio/gpiolib-acpi.c |   42 ++++++++++++++++++++++++++++++++++++++----
 1 file changed, 38 insertions(+), 4 deletions(-)

--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/dmi.h>
 #include <linux/errno.h>
 #include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
@@ -23,6 +24,11 @@
 
 #include "gpiolib.h"
 
+static int run_edge_events_on_boot = -1;
+module_param(run_edge_events_on_boot, int, 0444);
+MODULE_PARM_DESC(run_edge_events_on_boot,
+		 "Run edge _AEI event-handlers at boot: 0=no, 1=yes, -1=auto");
+
 /**
  * struct acpi_gpio_event - ACPI GPIO event handler data
  *
@@ -231,10 +237,13 @@ static void acpi_gpiochip_request_irq(st
 	event->irq_requested = true;
 
 	/* Make sure we trigger the initial state of edge-triggered IRQs */
-	value = gpiod_get_raw_value_cansleep(event->desc);
-	if (((event->irqflags & IRQF_TRIGGER_RISING) && value == 1) ||
-	    ((event->irqflags & IRQF_TRIGGER_FALLING) && value == 0))
-		event->handler(event->irq, event);
+	if (run_edge_events_on_boot &&
+	    (event->irqflags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING))) {
+		value = gpiod_get_raw_value_cansleep(event->desc);
+		if (((event->irqflags & IRQF_TRIGGER_RISING) && value == 1) ||
+		    ((event->irqflags & IRQF_TRIGGER_FALLING) && value == 0))
+			event->handler(event->irq, event);
+	}
 }
 
 static void acpi_gpiochip_request_irqs(struct acpi_gpio_chip *acpi_gpio)
@@ -1302,3 +1311,28 @@ static int acpi_gpio_handle_deferred_req
 }
 /* We must use _sync so that this runs after the first deferred_probe run */
 late_initcall_sync(acpi_gpio_handle_deferred_request_irqs);
+
+static const struct dmi_system_id run_edge_events_on_boot_blacklist[] = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MINIX"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"),
+		}
+	},
+	{} /* Terminating entry */
+};
+
+static int acpi_gpio_setup_params(void)
+{
+	if (run_edge_events_on_boot < 0) {
+		if (dmi_check_system(run_edge_events_on_boot_blacklist))
+			run_edge_events_on_boot = 0;
+		else
+			run_edge_events_on_boot = 1;
+	}
+
+	return 0;
+}
+
+/* Directly after dmi_setup() which runs as core_initcall() */
+postcore_initcall(acpi_gpio_setup_params);

[PATCH 4.14 18/45] gpio: fix line flag validation in linehandle_create

[Greg Kroah-Hartman]

From: Kent Gibson <warthog618@gmail.com>

commit e95fbc130a162ba9ad956311b95aa0da269eea48 upstream.

linehandle_create should not allow both GPIOHANDLE_REQUEST_INPUT
and GPIOHANDLE_REQUEST_OUTPUT to be set.

Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpio/gpiolib.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -444,12 +444,23 @@ static int linehandle_create(struct gpio
 	struct linehandle_state *lh;
 	struct file *file;
 	int fd, i, count = 0, ret;
+	u32 lflags;
 
 	if (copy_from_user(&handlereq, ip, sizeof(handlereq)))
 		return -EFAULT;
 	if ((handlereq.lines == 0) || (handlereq.lines > GPIOHANDLES_MAX))
 		return -EINVAL;
 
+	lflags = handlereq.flags;
+
+	/*
+	 * Do not allow both INPUT & OUTPUT flags to be set as they are
+	 * contradictory.
+	 */
+	if ((lflags & GPIOHANDLE_REQUEST_INPUT) &&
+	    (lflags & GPIOHANDLE_REQUEST_OUTPUT))
+		return -EINVAL;
+
 	lh = kzalloc(sizeof(*lh), GFP_KERNEL);
 	if (!lh)
 		return -ENOMEM;
@@ -470,7 +481,6 @@ static int linehandle_create(struct gpio
 	/* Request each GPIO */
 	for (i = 0; i < handlereq.lines; i++) {
 		u32 offset = handlereq.lineoffsets[i];
-		u32 lflags = handlereq.flags;
 		struct gpio_desc *desc;
 
 		if (offset >= gdev->ngpio) {

[PATCH 4.14 19/45] gpio: fix line flag validation in lineevent_create

[Greg Kroah-Hartman]

From: Kent Gibson <warthog618@gmail.com>

commit 5ca2f54b597c816df54ff1b28eb99cf7262b955d upstream.

lineevent_create should not allow any of GPIOHANDLE_REQUEST_OUTPUT,
GPIOHANDLE_REQUEST_OPEN_DRAIN or GPIOHANDLE_REQUEST_OPEN_SOURCE to be set.

Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpio/gpiolib.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -815,7 +815,9 @@ static int lineevent_create(struct gpio_
 	}
 
 	/* This is just wrong: we don't look for events on output lines */
-	if (lflags & GPIOHANDLE_REQUEST_OUTPUT) {
+	if ((lflags & GPIOHANDLE_REQUEST_OUTPUT) ||
+	    (lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN) ||
+	    (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE)) {
 		ret = -EINVAL;
 		goto out_free_label;
 	}
@@ -829,10 +831,6 @@ static int lineevent_create(struct gpio_
 
 	if (lflags & GPIOHANDLE_REQUEST_ACTIVE_LOW)
 		set_bit(FLAG_ACTIVE_LOW, &desc->flags);
-	if (lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN)
-		set_bit(FLAG_OPEN_DRAIN, &desc->flags);
-	if (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE)
-		set_bit(FLAG_OPEN_SOURCE, &desc->flags);
 
 	ret = gpiod_direction_input(desc);
 	if (ret)

[PATCH 4.14 20/45] Btrfs: fix assertion failure during fsync and use of stale transaction

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit 410f954cb1d1c79ae485dd83a175f21954fd87cd upstream.

Sometimes when fsync'ing a file we need to log that other inodes exist and
when we need to do that we acquire a reference on the inodes and then drop
that reference using iput() after logging them.

That generally is not a problem except if we end up doing the final iput()
(dropping the last reference) on the inode and that inode has a link count
of 0, which can happen in a very short time window if the logging path
gets a reference on the inode while it's being unlinked.

In that case we end up getting the eviction callback, btrfs_evict_inode(),
invoked through the iput() call chain which needs to drop all of the
inode's items from its subvolume btree, and in order to do that, it needs
to join a transaction at the helper function evict_refill_and_join().
However because the task previously started a transaction at the fsync
handler, btrfs_sync_file(), it has current->journal_info already pointing
to a transaction handle and therefore evict_refill_and_join() will get
that transaction handle from btrfs_join_transaction(). From this point on,
two different problems can happen:

1) evict_refill_and_join() will often change the transaction handle's
   block reserve (->block_rsv) and set its ->bytes_reserved field to a
   value greater than 0. If evict_refill_and_join() never commits the
   transaction, the eviction handler ends up decreasing the reference
   count (->use_count) of the transaction handle through the call to
   btrfs_end_transaction(), and after that point we have a transaction
   handle with a NULL ->block_rsv (which is the value prior to the
   transaction join from evict_refill_and_join()) and a ->bytes_reserved
   value greater than 0. If after the eviction/iput completes the inode
   logging path hits an error or it decides that it must fallback to a
   transaction commit, the btrfs fsync handle, btrfs_sync_file(), gets a
   non-zero value from btrfs_log_dentry_safe(), and because of that
   non-zero value it tries to commit the transaction using a handle with
   a NULL ->block_rsv and a non-zero ->bytes_reserved value. This makes
   the transaction commit hit an assertion failure at
   btrfs_trans_release_metadata() because ->bytes_reserved is not zero but
   the ->block_rsv is NULL. The produced stack trace for that is like the
   following:

   [192922.917158] assertion failed: !trans->bytes_reserved, file: fs/btrfs/transaction.c, line: 816
   [192922.917553] ------------[ cut here ]------------
   [192922.917922] kernel BUG at fs/btrfs/ctree.h:3532!
   [192922.918310] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
   [192922.918666] CPU: 2 PID: 883 Comm: fsstress Tainted: G        W         5.1.4-btrfs-next-47 #1
   [192922.919035] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
   [192922.919801] RIP: 0010:assfail.constprop.25+0x18/0x1a [btrfs]
   (...)
   [192922.920925] RSP: 0018:ffffaebdc8a27da8 EFLAGS: 00010286
   [192922.921315] RAX: 0000000000000051 RBX: ffff95c9c16a41c0 RCX: 0000000000000000
   [192922.921692] RDX: 0000000000000000 RSI: ffff95cab6b16838 RDI: ffff95cab6b16838
   [192922.922066] RBP: ffff95c9c16a41c0 R08: 0000000000000000 R09: 0000000000000000
   [192922.922442] R10: ffffaebdc8a27e70 R11: 0000000000000000 R12: ffff95ca731a0980
   [192922.922820] R13: 0000000000000000 R14: ffff95ca84c73338 R15: ffff95ca731a0ea8
   [192922.923200] FS:  00007f337eda4e80(0000) GS:ffff95cab6b00000(0000) knlGS:0000000000000000
   [192922.923579] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
   [192922.923948] CR2: 00007f337edad000 CR3: 00000001e00f6002 CR4: 00000000003606e0
   [192922.924329] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
   [192922.924711] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
   [192922.925105] Call Trace:
   [192922.925505]  btrfs_trans_release_metadata+0x10c/0x170 [btrfs]
   [192922.925911]  btrfs_commit_transaction+0x3e/0xaf0 [btrfs]
   [192922.926324]  btrfs_sync_file+0x44c/0x490 [btrfs]
   [192922.926731]  do_fsync+0x38/0x60
   [192922.927138]  __x64_sys_fdatasync+0x13/0x20
   [192922.927543]  do_syscall_64+0x60/0x1c0
   [192922.927939]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
   (...)
   [192922.934077] ---[ end trace f00808b12068168f ]---

2) If evict_refill_and_join() decides to commit the transaction, it will
   be able to do it, since the nested transaction join only increments the
   transaction handle's ->use_count reference counter and it does not
   prevent the transaction from getting committed. This means that after
   eviction completes, the fsync logging path will be using a transaction
   handle that refers to an already committed transaction. What happens
   when using such a stale transaction can be unpredictable, we are at
   least having a use-after-free on the transaction handle itself, since
   the transaction commit will call kmem_cache_free() against the handle
   regardless of its ->use_count value, or we can end up silently losing
   all the updates to the log tree after that iput() in the logging path,
   or using a transaction handle that in the meanwhile was allocated to
   another task for a new transaction, etc, pretty much unpredictable
   what can happen.

In order to fix both of them, instead of using iput() during logging, use
btrfs_add_delayed_iput(), so that the logging path of fsync never drops
the last reference on an inode, that step is offloaded to a safe context
(usually the cleaner kthread).

The assertion failure issue was sporadically triggered by the test case
generic/475 from fstests, which loads the dm error target while fsstress
is running, which lead to fsync failing while logging inodes with -EIO
errors and then trying later to commit the transaction, triggering the
assertion failure.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/tree-log.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -5122,7 +5122,7 @@ again:
 						BTRFS_I(other_inode),
 						LOG_OTHER_INODE, 0, LLONG_MAX,
 						ctx);
-				iput(other_inode);
+				btrfs_add_delayed_iput(other_inode);
 				if (err)
 					goto out_unlock;
 				else
@@ -5539,7 +5539,7 @@ process_leaf:
 			}
 
 			if (btrfs_inode_in_log(BTRFS_I(di_inode), trans->transid)) {
-				iput(di_inode);
+				btrfs_add_delayed_iput(di_inode);
 				break;
 			}
 
@@ -5551,7 +5551,7 @@ process_leaf:
 			if (!ret &&
 			    btrfs_must_commit_transaction(trans, BTRFS_I(di_inode)))
 				ret = 1;
-			iput(di_inode);
+			btrfs_add_delayed_iput(di_inode);
 			if (ret)
 				goto next_dir_inode;
 			if (ctx->log_new_dentries) {
@@ -5698,7 +5698,7 @@ static int btrfs_log_all_parents(struct
 			if (!ret && ctx && ctx->log_new_dentries)
 				ret = log_new_dir_dentries(trans, root,
 						   BTRFS_I(dir_inode), ctx);
-			iput(dir_inode);
+			btrfs_add_delayed_iput(dir_inode);
 			if (ret)
 				goto out;
 		}

[PATCH 4.14 21/45] genirq: Prevent NULL pointer dereference in resend_irqs()

[Greg Kroah-Hartman]

From: Yunfeng Ye <yeyunfeng@huawei.com>

commit eddf3e9c7c7e4d0707c68d1bb22cc6ec8aef7d4a upstream.

The following crash was observed:

  Unable to handle kernel NULL pointer dereference at 0000000000000158
  Internal error: Oops: 96000004 [#1] SMP
  pc : resend_irqs+0x68/0xb0
  lr : resend_irqs+0x64/0xb0
  ...
  Call trace:
   resend_irqs+0x68/0xb0
   tasklet_action_common.isra.6+0x84/0x138
   tasklet_action+0x2c/0x38
   __do_softirq+0x120/0x324
   run_ksoftirqd+0x44/0x60
   smpboot_thread_fn+0x1ac/0x1e8
   kthread+0x134/0x138
   ret_from_fork+0x10/0x18

The reason for this is that the interrupt resend mechanism happens in soft
interrupt context, which is a asynchronous mechanism versus other
operations on interrupts. free_irq() does not take resend handling into
account. Thus, the irq descriptor might be already freed before the resend
tasklet is executed. resend_irqs() does not check the return value of the
interrupt descriptor lookup and derefences the return value
unconditionally.

  1):
  __setup_irq
    irq_startup
      check_irq_resend  // activate softirq to handle resend irq
  2):
  irq_domain_free_irqs
    irq_free_descs
      free_desc
        call_rcu(&desc->rcu, delayed_free_desc)
  3):
  __do_softirq
    tasklet_action
      resend_irqs
        desc = irq_to_desc(irq)
        desc->handle_irq(desc)  // desc is NULL --> Ooops

Fix this by adding a NULL pointer check in resend_irqs() before derefencing
the irq descriptor.

Fixes: a4633adcdbc1 ("[PATCH] genirq: add genirq sw IRQ-retrigger")
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1630ae13-5c8e-901e-de09-e740b6a426a7@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/irq/resend.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/kernel/irq/resend.c
+++ b/kernel/irq/resend.c
@@ -38,6 +38,8 @@ static void resend_irqs(unsigned long ar
 		irq = find_first_bit(irqs_resend, nr_irqs);
 		clear_bit(irq, irqs_resend);
 		desc = irq_to_desc(irq);
+		if (!desc)
+			continue;
 		local_irq_disable();
 		desc->handle_irq(desc);
 		local_irq_enable();

[PATCH 4.14 22/45] KVM: s390: Do not leak kernel stack data in the KVM_S390_INTERRUPT ioctl

[Greg Kroah-Hartman]

From: Thomas Huth <thuth@redhat.com>

commit 53936b5bf35e140ae27e4bbf0447a61063f400da upstream.

When the userspace program runs the KVM_S390_INTERRUPT ioctl to inject
an interrupt, we convert them from the legacy struct kvm_s390_interrupt
to the new struct kvm_s390_irq via the s390int_to_s390irq() function.
However, this function does not take care of all types of interrupts
that we can inject into the guest later (see do_inject_vcpu()). Since we
do not clear out the s390irq values before calling s390int_to_s390irq(),
there is a chance that we copy random data from the kernel stack which
could be leaked to the userspace later.

Specifically, the problem exists with the KVM_S390_INT_PFAULT_INIT
interrupt: s390int_to_s390irq() does not handle it, and the function
__inject_pfault_init() later copies irq->u.ext which contains the
random kernel stack data. This data can then be leaked either to
the guest memory in __deliver_pfault_init(), or the userspace might
retrieve it directly with the KVM_S390_GET_IRQ_STATE ioctl.

Fix it by handling that interrupt type in s390int_to_s390irq(), too,
and by making sure that the s390irq struct is properly pre-initialized.
And while we're at it, make sure that s390int_to_s390irq() now
directly returns -EINVAL for unknown interrupt types, so that we
immediately get a proper error code in case we add more interrupt
types to do_inject_vcpu() without updating s390int_to_s390irq()
sometime in the future.

Cc: stable@vger.kernel.org
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/kvm/20190912115438.25761-1-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/kvm/interrupt.c |   10 ++++++++++
 arch/s390/kvm/kvm-s390.c  |    2 +-
 2 files changed, 11 insertions(+), 1 deletion(-)

--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -1701,6 +1701,16 @@ int s390int_to_s390irq(struct kvm_s390_i
 	case KVM_S390_MCHK:
 		irq->u.mchk.mcic = s390int->parm64;
 		break;
+	case KVM_S390_INT_PFAULT_INIT:
+		irq->u.ext.ext_params = s390int->parm;
+		irq->u.ext.ext_params2 = s390int->parm64;
+		break;
+	case KVM_S390_RESTART:
+	case KVM_S390_INT_CLOCK_COMP:
+	case KVM_S390_INT_CPU_TIMER:
+		break;
+	default:
+		return -EINVAL;
 	}
 	return 0;
 }
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -3730,7 +3730,7 @@ long kvm_arch_vcpu_ioctl(struct file *fi
 	}
 	case KVM_S390_INTERRUPT: {
 		struct kvm_s390_interrupt s390int;
-		struct kvm_s390_irq s390irq;
+		struct kvm_s390_irq s390irq = {};
 
 		r = -EFAULT;
 		if (copy_from_user(&s390int, argp, sizeof(s390int)))

[PATCH 4.14 23/45] KVM: x86: work around leak of uninitialized stack contents

[Greg Kroah-Hartman]

From: Fuqian Huang <huangfq.daxian@gmail.com>

commit 541ab2aeb28251bf7135c7961f3a6080eebcc705 upstream.

Emulation of VMPTRST can incorrectly inject a page fault
when passed an operand that points to an MMIO address.
The page fault will use uninitialized kernel stack memory
as the CR2 and error code.

The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR
exit to userspace; however, it is not an easy fix, so for now just ensure
that the error code and CR2 are zero.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Cc: stable@vger.kernel.org
[add comment]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/x86.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4721,6 +4721,13 @@ int kvm_write_guest_virt_system(struct k
 	/* kvm_write_guest_virt_system can pull in tons of pages. */
 	vcpu->arch.l1tf_flush_l1d = true;
 
+	/*
+	 * FIXME: this should call handle_emulation_failure if X86EMUL_IO_NEEDED
+	 * is returned, but our callers are not ready for that and they blindly
+	 * call kvm_inject_page_fault.  Ensure that they at least do not leak
+	 * uninitialized kernel stack memory into cr2 and error code.
+	 */
+	memset(exception, 0, sizeof(*exception));
 	return kvm_write_guest_virt_helper(addr, val, bytes, vcpu,
 					   PFERR_WRITE_MASK, exception);
 }

[PATCH 4.14 24/45] KVM: nVMX: handle page fault in vmread

[Greg Kroah-Hartman]

From: Paolo Bonzini <pbonzini@redhat.com>

commit f7eea636c3d505fe6f1d1066234f1aaf7171b681 upstream.

The implementation of vmread to memory is still incomplete, as it
lacks the ability to do vmread to I/O memory just like vmptrst.

Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/vmx.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -7996,6 +7996,7 @@ static int handle_vmread(struct kvm_vcpu
 	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
 	u32 vmx_instruction_info = vmcs_read32(VMX_INSTRUCTION_INFO);
 	gva_t gva = 0;
+	struct x86_exception e;
 
 	if (!nested_vmx_check_permission(vcpu))
 		return 1;
@@ -8023,8 +8024,10 @@ static int handle_vmread(struct kvm_vcpu
 				vmx_instruction_info, true, &gva))
 			return 1;
 		/* _system ok, nested_vmx_check_permission has verified cpl=0 */
-		kvm_write_guest_virt_system(vcpu, gva, &field_value,
-					    (is_long_mode(vcpu) ? 8 : 4), NULL);
+		if (kvm_write_guest_virt_system(vcpu, gva, &field_value,
+						(is_long_mode(vcpu) ? 8 : 4),
+						NULL))
+			kvm_inject_page_fault(vcpu, &e);
 	}
 
 	nested_vmx_succeed(vcpu);

[PATCH 4.14 25/45] MIPS: VDSO: Prevent use of smp_processor_id()

[Greg Kroah-Hartman]

From: Paul Burton <paul.burton@mips.com>

commit 351fdddd366245c0fb4636f32edfb4198c8d6b8c upstream.

VDSO code should not be using smp_processor_id(), since it is executed
in user mode.
Introduce a VDSO-specific path which will cause a compile-time
or link-time error (depending upon support for __compiletime_error) if
the VDSO ever incorrectly attempts to use smp_processor_id().

[Matt Redfearn <matt.redfearn@imgtec.com>: Move before change to
smp_processor_id in series]

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/17932/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/include/asm/smp.h |   12 +++++++++++-
 arch/mips/vdso/Makefile     |    3 ++-
 2 files changed, 13 insertions(+), 2 deletions(-)

--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -25,7 +25,17 @@ extern cpumask_t cpu_sibling_map[];
 extern cpumask_t cpu_core_map[];
 extern cpumask_t cpu_foreign_map[];
 
-#define raw_smp_processor_id() (current_thread_info()->cpu)
+static inline int raw_smp_processor_id(void)
+{
+#if defined(__VDSO__)
+	extern int vdso_smp_processor_id(void)
+		__compiletime_error("VDSO should not call smp_processor_id()");
+	return vdso_smp_processor_id();
+#else
+	return current_thread_info()->cpu;
+#endif
+}
+#define raw_smp_processor_id raw_smp_processor_id
 
 /* Map from cpu id to sequential logical cpu number.  This will only
    not be idempotent when cpus failed to come on-line.	*/
--- a/arch/mips/vdso/Makefile
+++ b/arch/mips/vdso/Makefile
@@ -7,7 +7,8 @@ ccflags-vdso := \
 	$(filter -I%,$(KBUILD_CFLAGS)) \
 	$(filter -E%,$(KBUILD_CFLAGS)) \
 	$(filter -mmicromips,$(KBUILD_CFLAGS)) \
-	$(filter -march=%,$(KBUILD_CFLAGS))
+	$(filter -march=%,$(KBUILD_CFLAGS)) \
+	-D__VDSO__
 cflags-vdso := $(ccflags-vdso) \
 	$(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \
 	-O2 -g -fPIC -fno-strict-aliasing -fno-common -fno-builtin -G 0 \

[PATCH 4.14 26/45] MIPS: VDSO: Use same -m%-float cflag as the kernel proper

[Greg Kroah-Hartman]

From: Paul Burton <paul.burton@mips.com>

commit 0648e50e548d881d025b9419a1a168753c8e2bf7 upstream.

The MIPS VDSO build currently doesn't provide the -msoft-float flag to
the compiler as the kernel proper does. This results in an attempt to
use the compiler's default floating point configuration, which can be
problematic in cases where this is incompatible with the target CPU's
-march= flag. For example decstation_defconfig fails to build using
toolchains in which gcc was configured --with-fp-32=xx with the
following error:

    LDS     arch/mips/vdso/vdso.lds
  cc1: error: '-march=r3000' requires '-mfp32'
  make[2]: *** [scripts/Makefile.build:379: arch/mips/vdso/vdso.lds] Error 1

The kernel proper avoids this error because we build with the
-msoft-float compiler flag, rather than using the compiler's default.
Pass this flag through to the VDSO build so that it too becomes agnostic
to the toolchain's floating point configuration.

Note that this is filtered out from KBUILD_CFLAGS rather than simply
always using -msoft-float such that if we switch the kernel to use
-mno-float in the future the VDSO will automatically inherit the change.

The VDSO doesn't actually include any floating point code, and its
.MIPS.abiflags section is already manually generated to specify that
it's compatible with any floating point ABI. As such this change should
have no effect on the resulting VDSO, apart from fixing the build
failure for affected toolchains.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Kevin Hilman <khilman@baylibre.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v4.4+
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/vdso/Makefile |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/mips/vdso/Makefile
+++ b/arch/mips/vdso/Makefile
@@ -8,6 +8,7 @@ ccflags-vdso := \
 	$(filter -E%,$(KBUILD_CFLAGS)) \
 	$(filter -mmicromips,$(KBUILD_CFLAGS)) \
 	$(filter -march=%,$(KBUILD_CFLAGS)) \
+	$(filter -m%-float,$(KBUILD_CFLAGS)) \
 	-D__VDSO__
 cflags-vdso := $(ccflags-vdso) \
 	$(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \

[PATCH 4.14 27/45] powerpc: Add barrier_nospec to raw_copy_in_user()

[Greg Kroah-Hartman]

From: Suraj Jitindar Singh <sjitindarsingh@gmail.com>

commit 6fbcdd59094ade30db63f32316e9502425d7b256 upstream.

Commit ddf35cf3764b ("powerpc: Use barrier_nospec in copy_from_user()")
Added barrier_nospec before loading from user-controlled pointers. The
intention was to order the load from the potentially user-controlled
pointer vs a previous branch based on an access_ok() check or similar.

In order to achieve the same result, add a barrier_nospec to the
raw_copy_in_user() function before loading from such a user-controlled
pointer.

Fixes: ddf35cf3764b ("powerpc: Use barrier_nospec in copy_from_user()")
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/uaccess.h |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -280,6 +280,7 @@ extern unsigned long __copy_tofrom_user(
 static inline unsigned long
 raw_copy_in_user(void __user *to, const void __user *from, unsigned long n)
 {
+	barrier_nospec();
 	return __copy_tofrom_user(to, from, n);
 }
 #endif /* __powerpc64__ */

[PATCH 4.14 28/45] drm/meson: Add support for XBGR8888 & ABGR8888 formats

[Greg Kroah-Hartman]

From: Neil Armstrong <narmstrong@baylibre.com>

commit 5ffff4415f9eeae834960226770963e2947e17eb upstream.

Add missing XBGR8888 & ABGR8888 formats variants from the primary plane.

Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190429075238.7884-1-narmstrong@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/meson/meson_plane.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/drivers/gpu/drm/meson/meson_plane.c
+++ b/drivers/gpu/drm/meson/meson_plane.c
@@ -124,6 +124,13 @@ static void meson_plane_atomic_update(st
 		priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
 					      OSD_COLOR_MATRIX_32_ARGB;
 		break;
+	case DRM_FORMAT_XBGR8888:
+		/* For XRGB, replace the pixel's alpha by 0xFF */
+		writel_bits_relaxed(OSD_REPLACE_EN, OSD_REPLACE_EN,
+				    priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
+		priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
+					      OSD_COLOR_MATRIX_32_ABGR;
+		break;
 	case DRM_FORMAT_ARGB8888:
 		/* For ARGB, use the pixel's alpha */
 		writel_bits_relaxed(OSD_REPLACE_EN, 0,
@@ -131,6 +138,13 @@ static void meson_plane_atomic_update(st
 		priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
 					      OSD_COLOR_MATRIX_32_ARGB;
 		break;
+	case DRM_FORMAT_ABGR8888:
+		/* For ARGB, use the pixel's alpha */
+		writel_bits_relaxed(OSD_REPLACE_EN, 0,
+				    priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
+		priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
+					      OSD_COLOR_MATRIX_32_ABGR;
+		break;
 	case DRM_FORMAT_RGB888:
 		priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_24 |
 					      OSD_COLOR_MATRIX_24_RGB;
@@ -200,7 +214,9 @@ static const struct drm_plane_funcs meso
 
 static const uint32_t supported_drm_formats[] = {
 	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_ABGR8888,
 	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_XBGR8888,
 	DRM_FORMAT_RGB888,
 	DRM_FORMAT_RGB565,
 };

[PATCH 4.14 29/45] clk: rockchip: Dont yell about bad mmc phases when getting

[Greg Kroah-Hartman]

From: Douglas Anderson <dianders@chromium.org>

commit 6943b839721ad4a31ad2bacf6e71b21f2dfe3134 upstream.

At boot time, my rk3288-veyron devices yell with 8 lines that look
like this:
  [    0.000000] rockchip_mmc_get_phase: invalid clk rate

This is because the clock framework at clk_register() time tries to
get the phase but we don't have a parent yet.

While the errors appear to be harmless they are still ugly and, in
general, we don't want yells like this in the log unless they are
important.

There's no real reason to be yelling here.  We can still return
-EINVAL to indicate that the phase makes no sense without a parent.
If someone really tries to do tuning and the clock is reported as 0
then we'll see the yells in rockchip_mmc_set_phase().

Fixes: 4bf59902b500 ("clk: rockchip: Prevent calculating mmc phase if clock rate is zero")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/rockchip/clk-mmc-phase.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/clk/rockchip/clk-mmc-phase.c
+++ b/drivers/clk/rockchip/clk-mmc-phase.c
@@ -59,10 +59,8 @@ static int rockchip_mmc_get_phase(struct
 	u32 delay_num = 0;
 
 	/* See the comment for rockchip_mmc_set_phase below */
-	if (!rate) {
-		pr_err("%s: invalid clk rate\n", __func__);
+	if (!rate)
 		return -EINVAL;
-	}
 
 	raw_value = readl(mmc_clock->reg) >> (mmc_clock->shift);
 

[PATCH 4.14 30/45] mtd: rawnand: mtk: Fix wrongly assigned OOB buffer pointer issue

[Greg Kroah-Hartman]

From: Xiaolei Li <xiaolei.li@mediatek.com>

commit 336d4b138be2dad372b67a2388e42805c48aaa38 upstream.

One main goal of the function mtk_nfc_update_ecc_stats is to check
whether sectors are all empty. If they are empty, set these sectors's
data buffer and OOB buffer as 0xff.

But now, the sector OOB buffer pointer is wrongly assigned. We always
do memset from sector 0.

To fix this issue, pass start sector number to make OOB buffer pointer
be properly assigned.

Fixes: 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device")
Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/mtk_nand.c |   21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

--- a/drivers/mtd/nand/mtk_nand.c
+++ b/drivers/mtd/nand/mtk_nand.c
@@ -846,19 +846,21 @@ static int mtk_nfc_write_oob_std(struct
 	return ret & NAND_STATUS_FAIL ? -EIO : 0;
 }
 
-static int mtk_nfc_update_ecc_stats(struct mtd_info *mtd, u8 *buf, u32 sectors)
+static int mtk_nfc_update_ecc_stats(struct mtd_info *mtd, u8 *buf, u32 start,
+				    u32 sectors)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
 	struct mtk_nfc *nfc = nand_get_controller_data(chip);
 	struct mtk_nfc_nand_chip *mtk_nand = to_mtk_nand(chip);
 	struct mtk_ecc_stats stats;
+	u32 reg_size = mtk_nand->fdm.reg_size;
 	int rc, i;
 
 	rc = nfi_readl(nfc, NFI_STA) & STA_EMP_PAGE;
 	if (rc) {
 		memset(buf, 0xff, sectors * chip->ecc.size);
 		for (i = 0; i < sectors; i++)
-			memset(oob_ptr(chip, i), 0xff, mtk_nand->fdm.reg_size);
+			memset(oob_ptr(chip, start + i), 0xff, reg_size);
 		return 0;
 	}
 
@@ -878,7 +880,7 @@ static int mtk_nfc_read_subpage(struct m
 	u32 spare = mtk_nand->spare_per_sector;
 	u32 column, sectors, start, end, reg;
 	dma_addr_t addr;
-	int bitflips;
+	int bitflips = 0;
 	size_t len;
 	u8 *buf;
 	int rc;
@@ -946,14 +948,11 @@ static int mtk_nfc_read_subpage(struct m
 	if (rc < 0) {
 		dev_err(nfc->dev, "subpage done timeout\n");
 		bitflips = -EIO;
-	} else {
-		bitflips = 0;
-		if (!raw) {
-			rc = mtk_ecc_wait_done(nfc->ecc, ECC_DECODE);
-			bitflips = rc < 0 ? -ETIMEDOUT :
-				mtk_nfc_update_ecc_stats(mtd, buf, sectors);
-			mtk_nfc_read_fdm(chip, start, sectors);
-		}
+	} else if (!raw) {
+		rc = mtk_ecc_wait_done(nfc->ecc, ECC_DECODE);
+		bitflips = rc < 0 ? -ETIMEDOUT :
+			mtk_nfc_update_ecc_stats(mtd, buf, start, sectors);
+		mtk_nfc_read_fdm(chip, start, sectors);
 	}
 
 	dma_unmap_single(nfc->dev, addr, len, DMA_FROM_DEVICE);

[PATCH 4.14 31/45] PCI: Always allow probing with driver_override

[Greg Kroah-Hartman]

From: Alex Williamson <alex.williamson@redhat.com>

commit 2d2f4273cbe9058d1f5a518e5e880d27d7b3b30f upstream.

Commit 0e7df22401a3 ("PCI: Add sysfs sriov_drivers_autoprobe to control
VF driver binding") introduced the sriov_drivers_autoprobe attribute
which allows users to prevent the kernel from automatically probing a
driver for new VFs as they are created.  This allows VFs to be spawned
without automatically binding the new device to a host driver, such as
in cases where the user intends to use the device only with a meta
driver like vfio-pci.  However, the current implementation prevents any
use of drivers_probe with the VF while sriov_drivers_autoprobe=0.  This
blocks the now current general practice of setting driver_override
followed by using drivers_probe to bind a device to a specified driver.

The kernel never automatically sets a driver_override therefore it seems
we can assume a driver_override reflects the intent of the user.  Also,
probing a device using a driver_override match seems outside the scope
of the 'auto' part of sriov_drivers_autoprobe.  Therefore, let's allow
driver_override matches regardless of sriov_drivers_autoprobe, which we
can do by simply testing if a driver_override is set for a device as a
'can probe' condition.

Fixes: 0e7df22401a3 ("PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding")
Link: https://lore.kernel.org/lkml/155742996741.21878.569845487290798703.stgit@gimli.home
Link: https://lore.kernel.org/linux-pci/155672991496.20698.4279330795743262888.stgit@gimli.home/T/#u
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/pci-driver.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -400,7 +400,8 @@ void __weak pcibios_free_irq(struct pci_
 #ifdef CONFIG_PCI_IOV
 static inline bool pci_device_can_probe(struct pci_dev *pdev)
 {
-	return (!pdev->is_virtfn || pdev->physfn->sriov->drivers_autoprobe);
+	return (!pdev->is_virtfn || pdev->physfn->sriov->drivers_autoprobe ||
+		pdev->driver_override);
 }
 #else
 static inline bool pci_device_can_probe(struct pci_dev *pdev)

[PATCH 4.14 32/45] ubifs: Correctly use tnc_next() in search_dh_cookie()

[Greg Kroah-Hartman]

From: Richard Weinberger <richard@nod.at>

commit bacfa94b08027b9f66ede7044972e3b066766b3e upstream.

Commit c877154d307f fixed an uninitialized variable and optimized
the function to not call tnc_next() in the first iteration of the
loop. While this seemed perfectly legit and wise, it turned out to
be illegal.
If the lookup function does not find an exact match it will rewind
the cursor by 1.
The rewinded cursor will not match the name hash we are looking for
and this results in a spurious -ENOENT.
So we need to move to the next entry in case of an non-exact match,
but not if the match was exact.

While we are here, update the documentation to avoid further confusion.

Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: c877154d307f ("ubifs: Fix uninitialized variable in search_dh_cookie()")
Fixes: 781f675e2d7e ("ubifs: Fix unlink code wrt. double hash lookups")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ubifs/tnc.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

--- a/fs/ubifs/tnc.c
+++ b/fs/ubifs/tnc.c
@@ -1164,8 +1164,8 @@ static struct ubifs_znode *dirty_cow_bot
  *   o exact match, i.e. the found zero-level znode contains key @key, then %1
  *     is returned and slot number of the matched branch is stored in @n;
  *   o not exact match, which means that zero-level znode does not contain
- *     @key, then %0 is returned and slot number of the closest branch is stored
- *     in @n;
+ *     @key, then %0 is returned and slot number of the closest branch or %-1
+ *     is stored in @n; In this case calling tnc_next() is mandatory.
  *   o @key is so small that it is even less than the lowest key of the
  *     leftmost zero-level node, then %0 is returned and %0 is stored in @n.
  *
@@ -1882,13 +1882,19 @@ int ubifs_tnc_lookup_nm(struct ubifs_inf
 
 static int search_dh_cookie(struct ubifs_info *c, const union ubifs_key *key,
 			    struct ubifs_dent_node *dent, uint32_t cookie,
-			    struct ubifs_znode **zn, int *n)
+			    struct ubifs_znode **zn, int *n, int exact)
 {
 	int err;
 	struct ubifs_znode *znode = *zn;
 	struct ubifs_zbranch *zbr;
 	union ubifs_key *dkey;
 
+	if (!exact) {
+		err = tnc_next(c, &znode, n);
+		if (err)
+			return err;
+	}
+
 	for (;;) {
 		zbr = &znode->zbranch[*n];
 		dkey = &zbr->key;
@@ -1930,7 +1936,7 @@ static int do_lookup_dh(struct ubifs_inf
 	if (unlikely(err < 0))
 		goto out_unlock;
 
-	err = search_dh_cookie(c, key, dent, cookie, &znode, &n);
+	err = search_dh_cookie(c, key, dent, cookie, &znode, &n, err);
 
 out_unlock:
 	mutex_unlock(&c->tnc_mutex);
@@ -2716,7 +2722,7 @@ int ubifs_tnc_remove_dh(struct ubifs_inf
 		if (unlikely(err < 0))
 			goto out_free;
 
-		err = search_dh_cookie(c, key, dent, cookie, &znode, &n);
+		err = search_dh_cookie(c, key, dent, cookie, &znode, &n, err);
 		if (err)
 			goto out_free;
 	}

[PATCH 4.14 33/45] driver core: Fix use-after-free and double free on glue directory

[Greg Kroah-Hartman]

From: Muchun Song <smuchun@gmail.com>

commit ac43432cb1f5c2950408534987e57c2071e24d8f upstream.

There is a race condition between removing glue directory and adding a new
device under the glue dir. It can be reproduced in following test:

CPU1:                                         CPU2:

device_add()
  get_device_parent()
    class_dir_create_and_add()
      kobject_add_internal()
        create_dir()    // create glue_dir

                                              device_add()
                                                get_device_parent()
                                                  kobject_get() // get glue_dir

device_del()
  cleanup_glue_dir()
    kobject_del(glue_dir)

                                                kobject_add()
                                                  kobject_add_internal()
                                                    create_dir() // in glue_dir
                                                      sysfs_create_dir_ns()
                                                        kernfs_create_dir_ns(sd)

      sysfs_remove_dir() // glue_dir->sd=NULL
      sysfs_put()        // free glue_dir->sd

                                                          // sd is freed
                                                          kernfs_new_node(sd)
                                                            kernfs_get(glue_dir)
                                                            kernfs_add_one()
                                                            kernfs_put()

Before CPU1 remove last child device under glue dir, if CPU2 add a new
device under glue dir, the glue_dir kobject reference count will be
increase to 2 via kobject_get() in get_device_parent(). And CPU2 has
been called kernfs_create_dir_ns(), but not call kernfs_new_node().
Meanwhile, CPU1 call sysfs_remove_dir() and sysfs_put(). This result in
glue_dir->sd is freed and it's reference count will be 0. Then CPU2 call
kernfs_get(glue_dir) will trigger a warning in kernfs_get() and increase
it's reference count to 1. Because glue_dir->sd is freed by CPU1, the next
call kernfs_add_one() by CPU2 will fail(This is also use-after-free)
and call kernfs_put() to decrease reference count. Because the reference
count is decremented to 0, it will also call kmem_cache_free() to free
the glue_dir->sd again. This will result in double free.

In order to avoid this happening, we also should make sure that kernfs_node
for glue_dir is released in CPU1 only when refcount for glue_dir kobj is
1 to fix this race.

The following calltrace is captured in kernel 4.14 with the following patch
applied:

commit 726e41097920 ("drivers: core: Remove glue dirs from sysfs earlier")

--------------------------------------------------------------------------
[    3.633703] WARNING: CPU: 4 PID: 513 at .../fs/kernfs/dir.c:494
                Here is WARN_ON(!atomic_read(&kn->count) in kernfs_get().
....
[    3.633986] Call trace:
[    3.633991]  kernfs_create_dir_ns+0xa8/0xb0
[    3.633994]  sysfs_create_dir_ns+0x54/0xe8
[    3.634001]  kobject_add_internal+0x22c/0x3f0
[    3.634005]  kobject_add+0xe4/0x118
[    3.634011]  device_add+0x200/0x870
[    3.634017]  _request_firmware+0x958/0xc38
[    3.634020]  request_firmware_into_buf+0x4c/0x70
....
[    3.634064] kernel BUG at .../mm/slub.c:294!
                Here is BUG_ON(object == fp) in set_freepointer().
....
[    3.634346] Call trace:
[    3.634351]  kmem_cache_free+0x504/0x6b8
[    3.634355]  kernfs_put+0x14c/0x1d8
[    3.634359]  kernfs_create_dir_ns+0x88/0xb0
[    3.634362]  sysfs_create_dir_ns+0x54/0xe8
[    3.634366]  kobject_add_internal+0x22c/0x3f0
[    3.634370]  kobject_add+0xe4/0x118
[    3.634374]  device_add+0x200/0x870
[    3.634378]  _request_firmware+0x958/0xc38
[    3.634381]  request_firmware_into_buf+0x4c/0x70
--------------------------------------------------------------------------

Fixes: 726e41097920 ("drivers: core: Remove glue dirs from sysfs earlier")
Signed-off-by: Muchun Song <smuchun@gmail.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Link: https://lore.kernel.org/r/20190727032122.24639-1-smuchun@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/base/core.c |   53 +++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 52 insertions(+), 1 deletion(-)

--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -1572,12 +1572,63 @@ static inline struct kobject *get_glue_d
  */
 static void cleanup_glue_dir(struct device *dev, struct kobject *glue_dir)
 {
+	unsigned int ref;
+
 	/* see if we live in a "glue" directory */
 	if (!live_in_glue_dir(glue_dir, dev))
 		return;
 
 	mutex_lock(&gdp_mutex);
-	if (!kobject_has_children(glue_dir))
+	/**
+	 * There is a race condition between removing glue directory
+	 * and adding a new device under the glue directory.
+	 *
+	 * CPU1:                                         CPU2:
+	 *
+	 * device_add()
+	 *   get_device_parent()
+	 *     class_dir_create_and_add()
+	 *       kobject_add_internal()
+	 *         create_dir()    // create glue_dir
+	 *
+	 *                                               device_add()
+	 *                                                 get_device_parent()
+	 *                                                   kobject_get() // get glue_dir
+	 *
+	 * device_del()
+	 *   cleanup_glue_dir()
+	 *     kobject_del(glue_dir)
+	 *
+	 *                                               kobject_add()
+	 *                                                 kobject_add_internal()
+	 *                                                   create_dir() // in glue_dir
+	 *                                                     sysfs_create_dir_ns()
+	 *                                                       kernfs_create_dir_ns(sd)
+	 *
+	 *       sysfs_remove_dir() // glue_dir->sd=NULL
+	 *       sysfs_put()        // free glue_dir->sd
+	 *
+	 *                                                         // sd is freed
+	 *                                                         kernfs_new_node(sd)
+	 *                                                           kernfs_get(glue_dir)
+	 *                                                           kernfs_add_one()
+	 *                                                           kernfs_put()
+	 *
+	 * Before CPU1 remove last child device under glue dir, if CPU2 add
+	 * a new device under glue dir, the glue_dir kobject reference count
+	 * will be increase to 2 in kobject_get(k). And CPU2 has been called
+	 * kernfs_create_dir_ns(). Meanwhile, CPU1 call sysfs_remove_dir()
+	 * and sysfs_put(). This result in glue_dir->sd is freed.
+	 *
+	 * Then the CPU2 will see a stale "empty" but still potentially used
+	 * glue dir around in kernfs_new_node().
+	 *
+	 * In order to avoid this happening, we also should make sure that
+	 * kernfs_node for glue_dir is released in CPU1 only when refcount
+	 * for glue_dir kobj is 1.
+	 */
+	ref = kref_read(&glue_dir->kref);
+	if (!kobject_has_children(glue_dir) && !--ref)
 		kobject_del(glue_dir);
 	kobject_put(glue_dir);
 	mutex_unlock(&gdp_mutex);

[PATCH 4.14 34/45] crypto: talitos - check AES key size

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

commit 1ba34e71e9e56ac29a52e0d42b6290f3dc5bfd90 upstream.

Although the HW accepts any size and silently truncates
it to the correct length, the extra tests expects EINVAL
to be returned when the key size is not valid.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 4de9d0b547b9 ("crypto: talitos - Add ablkcipher algorithms")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/talitos.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -1528,6 +1528,18 @@ static int ablkcipher_setkey(struct cryp
 	return 0;
 }
 
+static int ablkcipher_aes_setkey(struct crypto_ablkcipher *cipher,
+				  const u8 *key, unsigned int keylen)
+{
+	if (keylen == AES_KEYSIZE_128 || keylen == AES_KEYSIZE_192 ||
+	    keylen == AES_KEYSIZE_256)
+		return ablkcipher_setkey(cipher, key, keylen);
+
+	crypto_ablkcipher_set_flags(cipher, CRYPTO_TFM_RES_BAD_KEY_LEN);
+
+	return -EINVAL;
+}
+
 static void common_nonsnoop_unmap(struct device *dev,
 				  struct talitos_edesc *edesc,
 				  struct ablkcipher_request *areq)
@@ -2621,6 +2633,7 @@ static struct talitos_alg_template drive
 				.min_keysize = AES_MIN_KEY_SIZE,
 				.max_keysize = AES_MAX_KEY_SIZE,
 				.ivsize = AES_BLOCK_SIZE,
+				.setkey = ablkcipher_aes_setkey,
 			}
 		},
 		.desc_hdr_template = DESC_HDR_TYPE_COMMON_NONSNOOP_NO_AFEU |
@@ -2638,6 +2651,7 @@ static struct talitos_alg_template drive
 				.min_keysize = AES_MIN_KEY_SIZE,
 				.max_keysize = AES_MAX_KEY_SIZE,
 				.ivsize = AES_BLOCK_SIZE,
+				.setkey = ablkcipher_aes_setkey,
 			}
 		},
 		.desc_hdr_template = DESC_HDR_TYPE_AESU_CTR_NONSNOOP |

[PATCH 4.14 35/45] crypto: talitos - fix CTR alg blocksize

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

commit b9a05b6041cb9810a291315569b2af0d63c3680a upstream.

CTR has a blocksize of 1.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 5e75ae1b3cef ("crypto: talitos - add new crypto modes")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/talitos.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -2644,7 +2644,7 @@ static struct talitos_alg_template drive
 		.alg.crypto = {
 			.cra_name = "ctr(aes)",
 			.cra_driver_name = "ctr-aes-talitos",
-			.cra_blocksize = AES_BLOCK_SIZE,
+			.cra_blocksize = 1,
 			.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
 				     CRYPTO_ALG_ASYNC,
 			.cra_ablkcipher = {

[PATCH 4.14 36/45] crypto: talitos - check data blocksize in ablkcipher.

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

commit ee483d32ee1a1a7f7d7e918fbc350c790a5af64a upstream.

When data size is not a multiple of the alg's block size,
the SEC generates an error interrupt and dumps the registers.
And for NULL size, the SEC does just nothing and the interrupt
is awaited forever.

This patch ensures the data size is correct before submitting
the request to the SEC engine.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 4de9d0b547b9 ("crypto: talitos - Add ablkcipher algorithms")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/talitos.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -1668,6 +1668,14 @@ static int ablkcipher_encrypt(struct abl
 	struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
 	struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
 	struct talitos_edesc *edesc;
+	unsigned int blocksize =
+			crypto_tfm_alg_blocksize(crypto_ablkcipher_tfm(cipher));
+
+	if (!areq->nbytes)
+		return 0;
+
+	if (areq->nbytes % blocksize)
+		return -EINVAL;
 
 	/* allocate extended descriptor */
 	edesc = ablkcipher_edesc_alloc(areq, true);
@@ -1685,6 +1693,14 @@ static int ablkcipher_decrypt(struct abl
 	struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
 	struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
 	struct talitos_edesc *edesc;
+	unsigned int blocksize =
+			crypto_tfm_alg_blocksize(crypto_ablkcipher_tfm(cipher));
+
+	if (!areq->nbytes)
+		return 0;
+
+	if (areq->nbytes % blocksize)
+		return -EINVAL;
 
 	/* allocate extended descriptor */
 	edesc = ablkcipher_edesc_alloc(areq, false);

[PATCH 4.14 37/45] crypto: talitos - fix ECB algs ivsize

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

commit d84cc9c9524ec5973a337533e6d8ccd3e5f05f2b upstream.

ECB's ivsize must be 0.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 5e75ae1b3cef ("crypto: talitos - add new crypto modes")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/talitos.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -2666,7 +2666,6 @@ static struct talitos_alg_template drive
 			.cra_ablkcipher = {
 				.min_keysize = AES_MIN_KEY_SIZE,
 				.max_keysize = AES_MAX_KEY_SIZE,
-				.ivsize = AES_BLOCK_SIZE,
 				.setkey = ablkcipher_aes_setkey,
 			}
 		},

[PATCH 4.14 38/45] crypto: talitos - Do not modify req->cryptlen on decryption.

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

commit 7ede4c36cf7c6516986ee9d75b197c8bf73ea96f upstream.

For decrypt, req->cryptlen includes the size of the authentication
part while all functions of the driver expect cryptlen to be
the size of the encrypted data.

As it is not expected to change req->cryptlen, this patch
implements local calculation of cryptlen.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 9c4a79653b35 ("crypto: talitos - Freescale integrated security engine (SEC) driver")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/talitos.c |   31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)

--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -943,11 +943,13 @@ static void talitos_sg_unmap(struct devi
 
 static void ipsec_esp_unmap(struct device *dev,
 			    struct talitos_edesc *edesc,
-			    struct aead_request *areq)
+			    struct aead_request *areq, bool encrypt)
 {
 	struct crypto_aead *aead = crypto_aead_reqtfm(areq);
 	struct talitos_ctx *ctx = crypto_aead_ctx(aead);
 	unsigned int ivsize = crypto_aead_ivsize(aead);
+	unsigned int authsize = crypto_aead_authsize(aead);
+	unsigned int cryptlen = areq->cryptlen - (encrypt ? 0 : authsize);
 
 	if (edesc->desc.hdr & DESC_HDR_TYPE_IPSEC_ESP)
 		unmap_single_talitos_ptr(dev, &edesc->desc.ptr[6],
@@ -956,7 +958,7 @@ static void ipsec_esp_unmap(struct devic
 	unmap_single_talitos_ptr(dev, &edesc->desc.ptr[2], DMA_TO_DEVICE);
 	unmap_single_talitos_ptr(dev, &edesc->desc.ptr[0], DMA_TO_DEVICE);
 
-	talitos_sg_unmap(dev, edesc, areq->src, areq->dst, areq->cryptlen,
+	talitos_sg_unmap(dev, edesc, areq->src, areq->dst, cryptlen,
 			 areq->assoclen);
 
 	if (edesc->dma_len)
@@ -967,7 +969,7 @@ static void ipsec_esp_unmap(struct devic
 		unsigned int dst_nents = edesc->dst_nents ? : 1;
 
 		sg_pcopy_to_buffer(areq->dst, dst_nents, ctx->iv, ivsize,
-				   areq->assoclen + areq->cryptlen - ivsize);
+				   areq->assoclen + cryptlen - ivsize);
 	}
 }
 
@@ -988,7 +990,7 @@ static void ipsec_esp_encrypt_done(struc
 
 	edesc = container_of(desc, struct talitos_edesc, desc);
 
-	ipsec_esp_unmap(dev, edesc, areq);
+	ipsec_esp_unmap(dev, edesc, areq, true);
 
 	/* copy the generated ICV to dst */
 	if (edesc->icv_ool) {
@@ -1020,7 +1022,7 @@ static void ipsec_esp_decrypt_swauth_don
 
 	edesc = container_of(desc, struct talitos_edesc, desc);
 
-	ipsec_esp_unmap(dev, edesc, req);
+	ipsec_esp_unmap(dev, edesc, req, false);
 
 	if (!err) {
 		char icvdata[SHA512_DIGEST_SIZE];
@@ -1066,7 +1068,7 @@ static void ipsec_esp_decrypt_hwauth_don
 
 	edesc = container_of(desc, struct talitos_edesc, desc);
 
-	ipsec_esp_unmap(dev, edesc, req);
+	ipsec_esp_unmap(dev, edesc, req, false);
 
 	/* check ICV auth status */
 	if (!err && ((desc->hdr_lo & DESC_HDR_LO_ICCR1_MASK) !=
@@ -1173,6 +1175,7 @@ static int talitos_sg_map(struct device
  * fill in and submit ipsec_esp descriptor
  */
 static int ipsec_esp(struct talitos_edesc *edesc, struct aead_request *areq,
+		     bool encrypt,
 		     void (*callback)(struct device *dev,
 				      struct talitos_desc *desc,
 				      void *context, int error))
@@ -1182,7 +1185,7 @@ static int ipsec_esp(struct talitos_edes
 	struct talitos_ctx *ctx = crypto_aead_ctx(aead);
 	struct device *dev = ctx->dev;
 	struct talitos_desc *desc = &edesc->desc;
-	unsigned int cryptlen = areq->cryptlen;
+	unsigned int cryptlen = areq->cryptlen - (encrypt ? 0 : authsize);
 	unsigned int ivsize = crypto_aead_ivsize(aead);
 	int tbl_off = 0;
 	int sg_count, ret;
@@ -1324,7 +1327,7 @@ static int ipsec_esp(struct talitos_edes
 
 	ret = talitos_submit(dev, ctx->ch, desc, callback, areq);
 	if (ret != -EINPROGRESS) {
-		ipsec_esp_unmap(dev, edesc, areq);
+		ipsec_esp_unmap(dev, edesc, areq, encrypt);
 		kfree(edesc);
 	}
 	return ret;
@@ -1433,9 +1436,10 @@ static struct talitos_edesc *aead_edesc_
 	unsigned int authsize = crypto_aead_authsize(authenc);
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
 	unsigned int ivsize = crypto_aead_ivsize(authenc);
+	unsigned int cryptlen = areq->cryptlen - (encrypt ? 0 : authsize);
 
 	return talitos_edesc_alloc(ctx->dev, areq->src, areq->dst,
-				   iv, areq->assoclen, areq->cryptlen,
+				   iv, areq->assoclen, cryptlen,
 				   authsize, ivsize, icv_stashing,
 				   areq->base.flags, encrypt);
 }
@@ -1454,7 +1458,7 @@ static int aead_encrypt(struct aead_requ
 	/* set encrypt */
 	edesc->desc.hdr = ctx->desc_hdr_template | DESC_HDR_MODE0_ENCRYPT;
 
-	return ipsec_esp(edesc, req, ipsec_esp_encrypt_done);
+	return ipsec_esp(edesc, req, true, ipsec_esp_encrypt_done);
 }
 
 static int aead_decrypt(struct aead_request *req)
@@ -1466,8 +1470,6 @@ static int aead_decrypt(struct aead_requ
 	struct talitos_edesc *edesc;
 	void *icvdata;
 
-	req->cryptlen -= authsize;
-
 	/* allocate extended descriptor */
 	edesc = aead_edesc_alloc(req, req->iv, 1, false);
 	if (IS_ERR(edesc))
@@ -1485,7 +1487,8 @@ static int aead_decrypt(struct aead_requ
 		/* reset integrity check result bits */
 		edesc->desc.hdr_lo = 0;
 
-		return ipsec_esp(edesc, req, ipsec_esp_decrypt_hwauth_done);
+		return ipsec_esp(edesc, req, false,
+				 ipsec_esp_decrypt_hwauth_done);
 	}
 
 	/* Have to check the ICV with software */
@@ -1501,7 +1504,7 @@ static int aead_decrypt(struct aead_requ
 	sg_pcopy_to_buffer(req->src, edesc->src_nents ? : 1, icvdata, authsize,
 			   req->assoclen + req->cryptlen - authsize);
 
-	return ipsec_esp(edesc, req, ipsec_esp_decrypt_swauth_done);
+	return ipsec_esp(edesc, req, false, ipsec_esp_decrypt_swauth_done);
 }
 
 static int ablkcipher_setkey(struct crypto_ablkcipher *cipher,

[PATCH 4.14 39/45] crypto: talitos - HMAC SNOOP NO AFEU mode requires SW icv checking.

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

commit 4bbfb839259a9c96a0be872e16f7471b7136aee5 upstream.

In that mode, hardware ICV verification is not supported.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 7405c8d7ff97 ("crypto: talitos - templates for AEAD using HMAC_SNOOP_NO_AFEU")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/talitos.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -1475,7 +1475,8 @@ static int aead_decrypt(struct aead_requ
 	if (IS_ERR(edesc))
 		return PTR_ERR(edesc);
 
-	if ((priv->features & TALITOS_FTR_HW_AUTH_CHECK) &&
+	if ((edesc->desc.hdr & DESC_HDR_TYPE_IPSEC_ESP) &&
+	    (priv->features & TALITOS_FTR_HW_AUTH_CHECK) &&
 	    ((!edesc->src_nents && !edesc->dst_nents) ||
 	     priv->features & TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT)) {
 

[PATCH 4.14 40/45] firmware: ti_sci: Always request response from firmware

[Greg Kroah-Hartman]

From: Andrew F. Davis <afd@ti.com>

commit 66f030eac257a572fbedab3d9646d87d647351fd upstream.

TI-SCI firmware will only respond to messages when the
TI_SCI_FLAG_REQ_ACK_ON_PROCESSED flag is set. Most messages already do
this, set this for the ones that do not.

This will be enforced in future firmware that better match the TI-SCI
specifications, this patch will not break users of existing firmware.

Fixes: aa276781a64a ("firmware: Add basic support for TI System Control Interface (TI-SCI) protocol")
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Tested-by: Alejandro Hernandez <ajhernandez@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/firmware/ti_sci.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -471,9 +471,9 @@ static int ti_sci_cmd_get_revision(struc
 	struct ti_sci_xfer *xfer;
 	int ret;
 
-	/* No need to setup flags since it is expected to respond */
 	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_VERSION,
-				   0x0, sizeof(struct ti_sci_msg_hdr),
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(struct ti_sci_msg_hdr),
 				   sizeof(*rev_info));
 	if (IS_ERR(xfer)) {
 		ret = PTR_ERR(xfer);
@@ -601,9 +601,9 @@ static int ti_sci_get_device_state(const
 	info = handle_to_ti_sci_info(handle);
 	dev = info->dev;
 
-	/* Response is expected, so need of any flags */
 	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_DEVICE_STATE,
-				   0, sizeof(*req), sizeof(*resp));
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
 	if (IS_ERR(xfer)) {
 		ret = PTR_ERR(xfer);
 		dev_err(dev, "Message alloc failed(%d)\n", ret);

[PATCH 4.14 41/45] drm/mediatek: mtk_drm_drv.c: Add of_node_put() before goto

[Greg Kroah-Hartman]

From: Nishka Dasgupta <nishkadg.linux@gmail.com>

commit 165d42c012be69900f0e2f8545626cb9e7d4a832 upstream.

Each iteration of for_each_child_of_node puts the previous
node, but in the case of a goto from the middle of the loop, there is
no put, thus causing a memory leak. Hence add an of_node_put before the
goto in two places.
Issue found with Coccinelle.

Fixes: 119f5173628a (drm/mediatek: Add DRM Driver for Mediatek SoC MT8173)

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/mediatek/mtk_drm_drv.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -504,12 +504,15 @@ static int mtk_drm_probe(struct platform
 			comp = devm_kzalloc(dev, sizeof(*comp), GFP_KERNEL);
 			if (!comp) {
 				ret = -ENOMEM;
+				of_node_put(node);
 				goto err_node;
 			}
 
 			ret = mtk_ddp_comp_init(dev, node, comp, comp_id, NULL);
-			if (ret)
+			if (ret) {
+				of_node_put(node);
 				goto err_node;
+			}
 
 			private->ddp_comp[comp_id] = comp;
 		}

[PATCH 4.14 42/45] Revert "Bluetooth: btusb: driver to enable the usb-wakeup feature"

[Greg Kroah-Hartman]

From: Mario Limonciello <mario.limonciello@dell.com>

commit 1ffdb51f28e8ec6be0a2b812c1765b5cf5c44a8f upstream.

This reverts commit a0085f2510e8976614ad8f766b209448b385492f.

This commit has caused regressions in notebooks that support suspend
to idle such as the XPS 9360, XPS 9370 and XPS 9380.

These notebooks will wakeup from suspend to idle from an unsolicited
advertising packet from an unpaired BLE device.

In a bug report it was sugggested that this is caused by a generic
lack of LE privacy support.  Revert this commit until that behavior
can be avoided by the kernel.

Fixes: a0085f2510e8 ("Bluetooth: btusb: driver to enable the usb-wakeup feature")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=200039
Link: https://marc.info/?l=linux-bluetooth&m=156441081612627&w=2
Link: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/750073/
CC: Bastien Nocera <hadess@hadess.net>
CC: Christian Kellner <ckellner@redhat.com>
CC: Sukumar Ghorai <sukumar.ghorai@intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/bluetooth/btusb.c |    5 -----
 1 file changed, 5 deletions(-)

--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -1124,10 +1124,6 @@ static int btusb_open(struct hci_dev *hd
 	}
 
 	data->intf->needs_remote_wakeup = 1;
-	/* device specific wakeup source enabled and required for USB
-	 * remote wakeup while host is suspended
-	 */
-	device_wakeup_enable(&data->udev->dev);
 
 	if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
 		goto done;
@@ -1191,7 +1187,6 @@ static int btusb_close(struct hci_dev *h
 		goto failed;
 
 	data->intf->needs_remote_wakeup = 0;
-	device_wakeup_disable(&data->udev->dev);
 	usb_autopm_put_interface(data->intf);
 
 failed:

[PATCH 4.14 43/45] platform/x86: pmc_atom: Add CB4063 Beckhoff Automation board to critclk_systems DMI table

[Greg Kroah-Hartman]

From: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>

commit 9452fbf5c6cf5f470e0748fe7a14a683e7765f7a upstream.

The CB4063 board uses pmc_plt_clk* clocks for ethernet controllers. This
adds it to the critclk_systems DMI table so the clocks are marked as
CLK_CRITICAL and not turned off.

Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/platform/x86/pmc_atom.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/platform/x86/pmc_atom.c
+++ b/drivers/platform/x86/pmc_atom.c
@@ -453,6 +453,14 @@ static const struct dmi_system_id critcl
 	},
 	{
 		/* pmc_plt_clk* - are used for ethernet controllers */
+		.ident = "Beckhoff CB4063",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff Automation"),
+			DMI_MATCH(DMI_BOARD_NAME, "CB4063"),
+		},
+	},
+	{
+		/* pmc_plt_clk* - are used for ethernet controllers */
 		.ident = "Beckhoff CB6263",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff Automation"),

[PATCH 4.14 44/45] nvmem: Use the same permissions for eeprom as for nvmem

[Greg Kroah-Hartman]

From: Jean Delvare <jdelvare@suse.de>

commit e70d8b287301eb6d7c7761c6171c56af62110ea3 upstream.

The compatibility "eeprom" attribute is currently root-only no
matter what the configuration says. The "nvmem" attribute does
respect the setting of the root_only configuration bit, so do the
same for "eeprom".

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: b6c217ab9be6 ("nvmem: Add backwards compatibility support for older EEPROM drivers.")
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190728184255.563332e6@endymion
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/nvmem/core.c |   15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -407,10 +407,17 @@ static int nvmem_setup_compat(struct nvm
 	if (!config->base_dev)
 		return -EINVAL;
 
-	if (nvmem->read_only)
-		nvmem->eeprom = bin_attr_ro_root_nvmem;
-	else
-		nvmem->eeprom = bin_attr_rw_root_nvmem;
+	if (nvmem->read_only) {
+		if (config->root_only)
+			nvmem->eeprom = bin_attr_ro_root_nvmem;
+		else
+			nvmem->eeprom = bin_attr_ro_nvmem;
+	} else {
+		if (config->root_only)
+			nvmem->eeprom = bin_attr_rw_root_nvmem;
+		else
+			nvmem->eeprom = bin_attr_rw_nvmem;
+	}
 	nvmem->eeprom.attr.name = "eeprom";
 	nvmem->eeprom.size = nvmem->size;
 #ifdef CONFIG_DEBUG_LOCK_ALLOC

[PATCH 4.14 45/45] x86/build: Add -Wnoaddress-of-packed-member to REALMODE_CFLAGS, to silence GCC9 build warning

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 42e0e95474fc6076b5cd68cab8fa0340a1797a72 upstream.

One of the very few warnings I have in the current build comes from
arch/x86/boot/edd.c, where I get the following with a gcc9 build:

   arch/x86/boot/edd.c: In function ‘query_edd’:
   arch/x86/boot/edd.c:148:11: warning: taking address of packed member of ‘struct boot_params’ may result in an unaligned pointer value [-Waddress-of-packed-member]
     148 |  mbrptr = boot_params.edd_mbr_sig_buffer;
         |           ^~~~~~~~~~~

This warning triggers because we throw away all the CFLAGS and then make
a new set for REALMODE_CFLAGS, so the -Wno-address-of-packed-member we
added in the following commit is not present:

  6f303d60534c ("gcc-9: silence 'address-of-packed-member' warning")

The simplest solution for now is to adjust the warning for this version
of CFLAGS as well, but it would definitely make sense to examine whether
REALMODE_CFLAGS could be derived from CFLAGS, so that it picks up changes
in the compiler flags environment automatically.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/Makefile |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -39,6 +39,7 @@ REALMODE_CFLAGS	:= $(M16_CFLAGS) -g -Os
 
 REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -ffreestanding)
 REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -fno-stack-protector)
+REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -Wno-address-of-packed-member)
 REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), $(cc_stack_align4))
 export REALMODE_CFLAGS
 

Re: [PATCH 4.14 00/45] 4.14.145-stable review

[kernelci.org bot]

stable-rc/linux-4.14.y boot: 131 boots: 0 failed, 121 passed with 10 offline (v4.14.144-46-g187d767985cf)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.14.y/kernel/v4.14.144-46-g187d767985cf/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.14.y/kernel/v4.14.144-46-g187d767985cf/

Tree: stable-rc
Branch: linux-4.14.y
Git Describe: v4.14.144-46-g187d767985cf
Git Commit: 187d767985cf878208592ce3ca667e5021abf2f6
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 66 unique boards, 23 SoC families, 13 builds out of 201

Offline Platforms:

arm64:

    defconfig:
        gcc-8
            apq8016-sbc: 1 offline lab

arm:

    multi_v7_defconfig:
        gcc-8
            exynos5800-peach-pi: 1 offline lab
            qcom-apq8064-cm-qs600: 1 offline lab
            qcom-apq8064-ifc6410: 1 offline lab
            sun5i-r8-chip: 1 offline lab

    davinci_all_defconfig:
        gcc-8
            dm365evm,legacy: 1 offline lab

    qcom_defconfig:
        gcc-8
            qcom-apq8064-cm-qs600: 1 offline lab
            qcom-apq8064-ifc6410: 1 offline lab

    sunxi_defconfig:
        gcc-8
            sun5i-r8-chip: 1 offline lab
            sun7i-a20-bananapi: 1 offline lab

---
For more info write to <info@kernelci.org>

Re: [PATCH 4.14 00/45] 4.14.145-stable review

[Naresh Kamboju]

On Wed, 18 Sep 2019 at 11:51, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.14.145 release.
> There are 45 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri 20 Sep 2019 06:09:47 AM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.145-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.14.145-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: 187d767985cf878208592ce3ca667e5021abf2f6
git describe: v4.14.144-46-g187d767985cf
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.144-46-g187d767985cf

No regressions (compared to build v4.14.144)

No fixes (compared to build v4.14.144)

Ran 23713 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-containers-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fs-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-mm-tests
* spectre-meltdown-checker-test
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-cpuhotplug-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* network-basic-tests
* perf
* v4l2-compliance
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.14 00/45] 4.14.145-stable review

[Jon Hunter]

On 18/09/2019 07:18, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.145 release.
> There are 45 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri 20 Sep 2019 06:09:47 AM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.145-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests are passing for Tegra ...

Test results for stable-v4.14:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    24 tests:	24 pass, 0 fail

Linux version:	4.14.145-rc1-g187d767985cf
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.14 00/45] 4.14.145-stable review

[Jon Hunter]

On 18/09/2019 07:18, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.145 release.
> There are 45 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri 20 Sep 2019 06:09:47 AM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.145-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests are passing for Tegra ...

Test results for stable-v4.14:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    24 tests:	24 pass, 0 fail

Linux version:	4.14.145-rc1-g187d767985cf
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.14 00/45] 4.14.145-stable review

[Guenter Roeck]

On Wed, Sep 18, 2019 at 08:18:38AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.145 release.
> There are 45 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri 20 Sep 2019 06:09:47 AM UTC.
> Anything received after that time might be too late.
> 

Build results:
	total: 172 pass: 172 fail: 0
Qemu test results:
	total: 372 pass: 372 fail: 0

Guenter

Re: [PATCH 4.14 00/45] 4.14.145-stable review

[shuah]

On 9/18/19 12:18 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.145 release.
> There are 45 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri 20 Sep 2019 06:09:47 AM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.145-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah