[PATCH 4.14 00/43] 4.14.227-rc1 review

[PATCH 4.14 00/43] 4.14.227-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.227 release.
There are 43 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 24 Mar 2021 12:19:09 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.227-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.227-rc1

Thomas Gleixner <tglx@linutronix.de>
    genirq: Disable interrupts for force threaded handlers

Shijie Luo <luoshijie1@huawei.com>
    ext4: fix potential error in ext4_do_update_inode

zhangyi (F) <yi.zhang@huawei.com>
    ext4: do not try to set xattr into ea_inode if value is empty

zhangyi (F) <yi.zhang@huawei.com>
    ext4: find old entry again if failed to rename whiteout

Oleg Nesterov <oleg@redhat.com>
    x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall()

Oleg Nesterov <oleg@redhat.com>
    x86: Move TS_COMPAT back to asm/thread_info.h

Oleg Nesterov <oleg@redhat.com>
    kernel, fs: Introduce and use set_restart_fn() and arch_set_restart_data()

Thomas Gleixner <tglx@linutronix.de>
    x86/ioapic: Ignore IRQ2 again

Kan Liang <kan.liang@linux.intel.com>
    perf/x86/intel: Fix a crash caused by zero PEBS status

Tyrel Datwyler <tyreld@linux.ibm.com>
    PCI: rpadlpar: Fix potential drc_name corruption in store functions

Ye Xiang <xiang.ye@intel.com>
    iio: hid-sensor-temperature: Fix issues of timestamp channel

Ye Xiang <xiang.ye@intel.com>
    iio: hid-sensor-prox: Fix scale not correct issue

Ye Xiang <xiang.ye@intel.com>
    iio: hid-sensor-humidity: Fix alignment issue of timestamp channel

Dinghao Liu <dinghao.liu@zju.edu.cn>
    iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler

Dan Carpenter <dan.carpenter@oracle.com>
    iio: adis16400: Fix an error code in adis16400_initial_setup()

Jonathan Albrieux <jonathan.albrieux@gmail.com>
    iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel

Jonathan Cameron <Jonathan.Cameron@huawei.com>
    iio:adc:stm32-adc: Add HAS_IOMEM dependency

Jim Lin <jilin@nvidia.com>
    usb: gadget: configfs: Fix KASAN use-after-free

Macpaul Lin <macpaul.lin@mediatek.com>
    USB: replace hardcode maximum usb string length by definition

Alan Stern <stern@rowland.harvard.edu>
    usb-storage: Add quirk to defeat Kindle's automatic unload

Sagi Grimberg <sagi@grimberg.me>
    nvme-rdma: fix possible hang when failing to set io queues

Dan Carpenter <dan.carpenter@oracle.com>
    scsi: lpfc: Fix some error codes in debugfs

Pavel Skripkin <paskripkin@gmail.com>
    net/qrtr: fix __netdev_alloc_skb call

Daniel Kobras <kobras@puzzle-itc.de>
    sunrpc: fix refcount leak for rpc auth modules

Timo Rothenpieler <timo@rothenpieler.org>
    svcrdma: disable timeouts on rdma backchannel

Joe Korty <joe.korty@concurrent-rt.com>
    NFSD: Repair misuse of sv_lock in 5.10.16-rt30.

Sagi Grimberg <sagi@grimberg.me>
    nvmet: don't check iosqes,iocqes for discovery controllers

Filipe Manana <fdmanana@suse.com>
    btrfs: fix race when cloning extent buffer during rewind of an old root

Arnaldo Carvalho de Melo <acme@redhat.com>
    tools build feature: Check if pthread_barrier_t is available

Changbin Du <changbin.du@gmail.com>
    perf: Make perf able to build with latest libbfd

Arnaldo Carvalho de Melo <acme@redhat.com>
    tools build: Check if gettid() is available before providing helper

Arnaldo Carvalho de Melo <acme@redhat.com>
    tools build feature: Check if eventfd() is available

Arnaldo Carvalho de Melo <acme@redhat.com>
    tools build feature: Check if get_current_dir_name() is available

Jiri Olsa <jolsa@redhat.com>
    perf tools: Use %define api.pure full instead of %pure-parser

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    Revert "PM: runtime: Update device status before letting suppliers suspend"

Piotr Krysiuk <piotras@gmail.com>
    bpf: Prohibit alu ops for pointer types not defining ptr_limit

Florian Fainelli <f.fainelli@gmail.com>
    net: dsa: b53: Support setting learning on port

Piotr Krysiuk <piotras@gmail.com>
    bpf: Add sanity check for upper ptr_limit

Piotr Krysiuk <piotras@gmail.com>
    bpf: Simplify alu_limit masking for pointer arithmetic

Piotr Krysiuk <piotras@gmail.com>
    bpf: Fix off-by-one for area size in creating mask to left

Jan Kara <jack@suse.cz>
    ext4: check journal inode extents more carefully

Jan Kara <jack@suse.cz>
    ext4: don't allow overlapping system zones

Jan Kara <jack@suse.cz>
    ext4: handle error of ext4_setup_system_zone() on remount


-------------

Diffstat:

 Makefile                                         |  4 +-
 arch/x86/events/intel/ds.c                       |  2 +-
 arch/x86/include/asm/processor.h                 |  9 ---
 arch/x86/include/asm/thread_info.h               | 23 +++++++-
 arch/x86/kernel/apic/io_apic.c                   | 10 ++++
 arch/x86/kernel/signal.c                         | 24 +-------
 drivers/base/power/runtime.c                     | 62 +++++++++------------
 drivers/iio/adc/Kconfig                          |  1 +
 drivers/iio/adc/qcom-spmi-vadc.c                 |  2 +-
 drivers/iio/gyro/mpu3050-core.c                  |  2 +
 drivers/iio/humidity/hid-sensor-humidity.c       | 12 ++--
 drivers/iio/imu/adis16400_core.c                 |  3 +-
 drivers/iio/light/hid-sensor-prox.c              | 13 ++++-
 drivers/iio/temperature/hid-sensor-temperature.c | 14 +++--
 drivers/net/dsa/b53/b53_common.c                 | 20 +++++++
 drivers/net/dsa/b53/b53_regs.h                   |  1 +
 drivers/net/dsa/bcm_sf2.c                        |  5 ++
 drivers/net/dsa/bcm_sf2_regs.h                   |  2 +
 drivers/nvme/host/rdma.c                         |  7 ++-
 drivers/nvme/target/core.c                       | 17 +++++-
 drivers/pci/hotplug/rpadlpar_sysfs.c             | 14 ++---
 drivers/scsi/lpfc/lpfc_debugfs.c                 |  4 +-
 drivers/usb/gadget/composite.c                   |  4 +-
 drivers/usb/gadget/configfs.c                    | 16 ++++--
 drivers/usb/gadget/usbstring.c                   |  4 +-
 drivers/usb/storage/transport.c                  |  7 +++
 drivers/usb/storage/unusual_devs.h               | 12 ++++
 fs/btrfs/ctree.c                                 |  2 +
 fs/ext4/block_validity.c                         | 71 +++++++++++-------------
 fs/ext4/ext4.h                                   |  6 +-
 fs/ext4/extents.c                                | 16 ++----
 fs/ext4/indirect.c                               |  6 +-
 fs/ext4/inode.c                                  | 13 ++---
 fs/ext4/mballoc.c                                |  4 +-
 fs/ext4/namei.c                                  | 29 +++++++++-
 fs/ext4/super.c                                  |  5 +-
 fs/ext4/xattr.c                                  |  2 +-
 fs/select.c                                      | 10 ++--
 include/linux/thread_info.h                      | 13 +++++
 include/linux/usb_usual.h                        |  2 +
 include/uapi/linux/usb/ch9.h                     |  3 +
 kernel/bpf/verifier.c                            | 33 +++++++----
 kernel/futex.c                                   |  3 +-
 kernel/irq/manage.c                              |  4 ++
 kernel/time/alarmtimer.c                         |  2 +-
 kernel/time/hrtimer.c                            |  2 +-
 kernel/time/posix-cpu-timers.c                   |  2 +-
 net/qrtr/qrtr.c                                  |  2 +-
 net/sunrpc/svc.c                                 |  6 +-
 net/sunrpc/svc_xprt.c                            |  4 +-
 net/sunrpc/xprtrdma/svc_rdma_backchannel.c       |  6 +-
 tools/build/Makefile.feature                     |  4 ++
 tools/build/feature/Makefile                     | 16 ++++++
 tools/build/feature/test-all.c                   | 20 +++++++
 tools/build/feature/test-eventfd.c               |  9 +++
 tools/build/feature/test-get_current_dir_name.c  | 10 ++++
 tools/build/feature/test-gettid.c                | 11 ++++
 tools/build/feature/test-pthread-barrier.c       | 12 ++++
 tools/perf/Makefile.config                       | 16 ++++++
 tools/perf/jvmti/jvmti_agent.c                   |  2 +
 tools/perf/util/Build                            |  1 +
 tools/perf/util/expr.y                           |  3 +-
 tools/perf/util/get_current_dir_name.c           | 18 ++++++
 tools/perf/util/parse-events.y                   |  2 +-
 tools/perf/util/srcline.c                        | 16 +++++-
 tools/perf/util/util.h                           |  4 ++
 66 files changed, 469 insertions(+), 215 deletions(-)

[PATCH 4.14 01/43] ext4: handle error of ext4_setup_system_zone() on remount

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

commit d176b1f62f242ab259ff665a26fbac69db1aecba upstream.

ext4_setup_system_zone() can fail. Handle the failure in ext4_remount().

Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200728130437.7804-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/super.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -5364,7 +5364,10 @@ static int ext4_remount(struct super_blo
 		ext4_register_li_request(sb, first_not_zeroed);
 	}
 
-	ext4_setup_system_zone(sb);
+	err = ext4_setup_system_zone(sb);
+	if (err)
+		goto restore_opts;
+
 	if (sbi->s_journal == NULL && !(old_sb_flags & MS_RDONLY))
 		ext4_commit_super(sb, 1);
 

[PATCH 4.14 02/43] ext4: dont allow overlapping system zones

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

commit bf9a379d0980e7413d94cb18dac73db2bfc5f470 upstream.

Currently, add_system_zone() just silently merges two added system zones
that overlap. However the overlap should not happen and it generally
suggests that some unrelated metadata overlap which indicates the fs is
corrupted. We should have caught such problems earlier (e.g. in
ext4_check_descriptors()) but add this check as another line of defense.
In later patch we also use this for stricter checking of journal inode
extent tree.

Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200728130437.7804-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/block_validity.c |   34 ++++++++++++----------------------
 1 file changed, 12 insertions(+), 22 deletions(-)

--- a/fs/ext4/block_validity.c
+++ b/fs/ext4/block_validity.c
@@ -58,7 +58,7 @@ static int add_system_zone(struct ext4_s
 			   ext4_fsblk_t start_blk,
 			   unsigned int count)
 {
-	struct ext4_system_zone *new_entry = NULL, *entry;
+	struct ext4_system_zone *new_entry, *entry;
 	struct rb_node **n = &sbi->system_blks.rb_node, *node;
 	struct rb_node *parent = NULL, *new_node = NULL;
 
@@ -69,30 +69,20 @@ static int add_system_zone(struct ext4_s
 			n = &(*n)->rb_left;
 		else if (start_blk >= (entry->start_blk + entry->count))
 			n = &(*n)->rb_right;
-		else {
-			if (start_blk + count > (entry->start_blk +
-						 entry->count))
-				entry->count = (start_blk + count -
-						entry->start_blk);
-			new_node = *n;
-			new_entry = rb_entry(new_node, struct ext4_system_zone,
-					     node);
-			break;
-		}
+		else	/* Unexpected overlap of system zones. */
+			return -EFSCORRUPTED;
 	}
 
-	if (!new_entry) {
-		new_entry = kmem_cache_alloc(ext4_system_zone_cachep,
-					     GFP_KERNEL);
-		if (!new_entry)
-			return -ENOMEM;
-		new_entry->start_blk = start_blk;
-		new_entry->count = count;
-		new_node = &new_entry->node;
+	new_entry = kmem_cache_alloc(ext4_system_zone_cachep,
+				     GFP_KERNEL);
+	if (!new_entry)
+		return -ENOMEM;
+	new_entry->start_blk = start_blk;
+	new_entry->count = count;
+	new_node = &new_entry->node;
 
-		rb_link_node(new_node, parent, n);
-		rb_insert_color(new_node, &sbi->system_blks);
-	}
+	rb_link_node(new_node, parent, n);
+	rb_insert_color(new_node, &sbi->system_blks);
 
 	/* Can we merge to the left? */
 	node = rb_prev(new_node);

[PATCH 4.14 03/43] ext4: check journal inode extents more carefully

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

commit ce9f24cccdc019229b70a5c15e2b09ad9c0ab5d1 upstream.

Currently, system zones just track ranges of block, that are "important"
fs metadata (bitmaps, group descriptors, journal blocks, etc.). This
however complicates how extent tree (or indirect blocks) can be checked
for inodes that actually track such metadata - currently the journal
inode but arguably we should be treating quota files or resize inode
similarly. We cannot run __ext4_ext_check() on such metadata inodes when
loading their extents as that would immediately trigger the validity
checks and so we just hack around that and special-case the journal
inode. This however leads to a situation that a journal inode which has
extent tree of depth at least one can have invalid extent tree that gets
unnoticed until ext4_cache_extents() crashes.

To overcome this limitation, track inode number each system zone belongs
to (0 is used for zones not belonging to any inode). We can then verify
inode number matches the expected one when verifying extent tree and
thus avoid the false errors. With this there's no need to to
special-case journal inode during extent tree checking anymore so remove
it.

Fixes: 0a944e8a6c66 ("ext4: don't perform block validity checks on the journal inode")
Reported-by: Wolfgang Frisch <wolfgang.frisch@suse.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200728130437.7804-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/block_validity.c |   37 +++++++++++++++++++++----------------
 fs/ext4/ext4.h           |    6 +++---
 fs/ext4/extents.c        |   16 ++++++----------
 fs/ext4/indirect.c       |    6 ++----
 fs/ext4/inode.c          |    5 ++---
 fs/ext4/mballoc.c        |    4 ++--
 6 files changed, 36 insertions(+), 38 deletions(-)

--- a/fs/ext4/block_validity.c
+++ b/fs/ext4/block_validity.c
@@ -24,6 +24,7 @@ struct ext4_system_zone {
 	struct rb_node	node;
 	ext4_fsblk_t	start_blk;
 	unsigned int	count;
+	u32		ino;
 };
 
 static struct kmem_cache *ext4_system_zone_cachep;
@@ -44,7 +45,8 @@ void ext4_exit_system_zone(void)
 static inline int can_merge(struct ext4_system_zone *entry1,
 		     struct ext4_system_zone *entry2)
 {
-	if ((entry1->start_blk + entry1->count) == entry2->start_blk)
+	if ((entry1->start_blk + entry1->count) == entry2->start_blk &&
+	    entry1->ino == entry2->ino)
 		return 1;
 	return 0;
 }
@@ -56,7 +58,7 @@ static inline int can_merge(struct ext4_
  */
 static int add_system_zone(struct ext4_sb_info *sbi,
 			   ext4_fsblk_t start_blk,
-			   unsigned int count)
+			   unsigned int count, u32 ino)
 {
 	struct ext4_system_zone *new_entry, *entry;
 	struct rb_node **n = &sbi->system_blks.rb_node, *node;
@@ -79,6 +81,7 @@ static int add_system_zone(struct ext4_s
 		return -ENOMEM;
 	new_entry->start_blk = start_blk;
 	new_entry->count = count;
+	new_entry->ino = ino;
 	new_node = &new_entry->node;
 
 	rb_link_node(new_node, parent, n);
@@ -154,16 +157,16 @@ static int ext4_protect_reserved_inode(s
 		if (n == 0) {
 			i++;
 		} else {
-			if (!ext4_data_block_valid(sbi, map.m_pblk, n)) {
-				ext4_error(sb, "blocks %llu-%llu from inode %u "
+			err = add_system_zone(sbi, map.m_pblk, n, ino);
+			if (err < 0) {
+				if (err == -EFSCORRUPTED) {
+					ext4_error(sb,
+					   "blocks %llu-%llu from inode %u "
 					   "overlap system zone", map.m_pblk,
 					   map.m_pblk + map.m_len - 1, ino);
-				err = -EFSCORRUPTED;
+				}
 				break;
 			}
-			err = add_system_zone(sbi, map.m_pblk, n);
-			if (err < 0)
-				break;
 			i += n;
 		}
 	}
@@ -192,16 +195,16 @@ int ext4_setup_system_zone(struct super_
 		if (ext4_bg_has_super(sb, i) &&
 		    ((i < 5) || ((i % flex_size) == 0)))
 			add_system_zone(sbi, ext4_group_first_block_no(sb, i),
-					ext4_bg_num_gdb(sb, i) + 1);
+					ext4_bg_num_gdb(sb, i) + 1, 0);
 		gdp = ext4_get_group_desc(sb, i, NULL);
-		ret = add_system_zone(sbi, ext4_block_bitmap(sb, gdp), 1);
+		ret = add_system_zone(sbi, ext4_block_bitmap(sb, gdp), 1, 0);
 		if (ret)
 			return ret;
-		ret = add_system_zone(sbi, ext4_inode_bitmap(sb, gdp), 1);
+		ret = add_system_zone(sbi, ext4_inode_bitmap(sb, gdp), 1, 0);
 		if (ret)
 			return ret;
 		ret = add_system_zone(sbi, ext4_inode_table(sb, gdp),
-				sbi->s_itb_per_group);
+				sbi->s_itb_per_group, 0);
 		if (ret)
 			return ret;
 	}
@@ -234,10 +237,11 @@ void ext4_release_system_zone(struct sup
  * start_blk+count) is valid; 0 if some part of the block region
  * overlaps with filesystem metadata blocks.
  */
-int ext4_data_block_valid(struct ext4_sb_info *sbi, ext4_fsblk_t start_blk,
-			  unsigned int count)
+int ext4_inode_block_valid(struct inode *inode, ext4_fsblk_t start_blk,
+			   unsigned int count)
 {
 	struct ext4_system_zone *entry;
+	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
 	struct rb_node *n = sbi->system_blks.rb_node;
 
 	if ((start_blk <= le32_to_cpu(sbi->s_es->s_first_data_block)) ||
@@ -253,6 +257,8 @@ int ext4_data_block_valid(struct ext4_sb
 		else if (start_blk >= (entry->start_blk + entry->count))
 			n = n->rb_right;
 		else {
+			if (entry->ino == inode->i_ino)
+				return 1;
 			sbi->s_es->s_last_error_block = cpu_to_le64(start_blk);
 			return 0;
 		}
@@ -275,8 +281,7 @@ int ext4_check_blockref(const char *func
 	while (bref < p+max) {
 		blk = le32_to_cpu(*bref++);
 		if (blk &&
-		    unlikely(!ext4_data_block_valid(EXT4_SB(inode->i_sb),
-						    blk, 1))) {
+		    unlikely(!ext4_inode_block_valid(inode, blk, 1))) {
 			es->s_last_error_block = cpu_to_le64(blk);
 			ext4_error_inode(inode, function, line, blk,
 					 "invalid block");
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -3151,9 +3151,9 @@ extern void ext4_release_system_zone(str
 extern int ext4_setup_system_zone(struct super_block *sb);
 extern int __init ext4_init_system_zone(void);
 extern void ext4_exit_system_zone(void);
-extern int ext4_data_block_valid(struct ext4_sb_info *sbi,
-				 ext4_fsblk_t start_blk,
-				 unsigned int count);
+extern int ext4_inode_block_valid(struct inode *inode,
+				  ext4_fsblk_t start_blk,
+				  unsigned int count);
 extern int ext4_check_blockref(const char *, unsigned int,
 			       struct inode *, __le32 *, unsigned int);
 
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -389,7 +389,7 @@ static int ext4_valid_extent(struct inod
 	 */
 	if (lblock + len <= lblock)
 		return 0;
-	return ext4_data_block_valid(EXT4_SB(inode->i_sb), block, len);
+	return ext4_inode_block_valid(inode, block, len);
 }
 
 static int ext4_valid_extent_idx(struct inode *inode,
@@ -397,7 +397,7 @@ static int ext4_valid_extent_idx(struct
 {
 	ext4_fsblk_t block = ext4_idx_pblock(ext_idx);
 
-	return ext4_data_block_valid(EXT4_SB(inode->i_sb), block, 1);
+	return ext4_inode_block_valid(inode, block, 1);
 }
 
 static int ext4_valid_extent_entries(struct inode *inode,
@@ -554,14 +554,10 @@ __read_extent_tree_block(const char *fun
 	}
 	if (buffer_verified(bh) && !(flags & EXT4_EX_FORCE_CACHE))
 		return bh;
-	if (!ext4_has_feature_journal(inode->i_sb) ||
-	    (inode->i_ino !=
-	     le32_to_cpu(EXT4_SB(inode->i_sb)->s_es->s_journal_inum))) {
-		err = __ext4_ext_check(function, line, inode,
-				       ext_block_hdr(bh), depth, pblk);
-		if (err)
-			goto errout;
-	}
+	err = __ext4_ext_check(function, line, inode,
+			       ext_block_hdr(bh), depth, pblk);
+	if (err)
+		goto errout;
 	set_buffer_verified(bh);
 	/*
 	 * If this is a leaf block, cache all of its entries
--- a/fs/ext4/indirect.c
+++ b/fs/ext4/indirect.c
@@ -842,8 +842,7 @@ static int ext4_clear_blocks(handle_t *h
 	else if (ext4_should_journal_data(inode))
 		flags |= EXT4_FREE_BLOCKS_FORGET;
 
-	if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), block_to_free,
-				   count)) {
+	if (!ext4_inode_block_valid(inode, block_to_free, count)) {
 		EXT4_ERROR_INODE(inode, "attempt to clear invalid "
 				 "blocks %llu len %lu",
 				 (unsigned long long) block_to_free, count);
@@ -1005,8 +1004,7 @@ static void ext4_free_branches(handle_t
 			if (!nr)
 				continue;		/* A hole */
 
-			if (!ext4_data_block_valid(EXT4_SB(inode->i_sb),
-						   nr, 1)) {
+			if (!ext4_inode_block_valid(inode, nr, 1)) {
 				EXT4_ERROR_INODE(inode,
 						 "invalid indirect mapped "
 						 "block %lu (level %d)",
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -420,8 +420,7 @@ static int __check_block_validity(struct
 	    (inode->i_ino ==
 	     le32_to_cpu(EXT4_SB(inode->i_sb)->s_es->s_journal_inum)))
 		return 0;
-	if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), map->m_pblk,
-				   map->m_len)) {
+	if (!ext4_inode_block_valid(inode, map->m_pblk, map->m_len)) {
 		ext4_error_inode(inode, func, line, map->m_pblk,
 				 "lblock %lu mapped to illegal pblock %llu "
 				 "(length %d)", (unsigned long) map->m_lblk,
@@ -4940,7 +4939,7 @@ struct inode *__ext4_iget(struct super_b
 
 	ret = 0;
 	if (ei->i_file_acl &&
-	    !ext4_data_block_valid(EXT4_SB(sb), ei->i_file_acl, 1)) {
+	    !ext4_inode_block_valid(inode, ei->i_file_acl, 1)) {
 		ext4_error_inode(inode, function, line, 0,
 				 "iget: bad extended attribute block %llu",
 				 ei->i_file_acl);
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -3017,7 +3017,7 @@ ext4_mb_mark_diskspace_used(struct ext4_
 	block = ext4_grp_offs_to_block(sb, &ac->ac_b_ex);
 
 	len = EXT4_C2B(sbi, ac->ac_b_ex.fe_len);
-	if (!ext4_data_block_valid(sbi, block, len)) {
+	if (!ext4_inode_block_valid(ac->ac_inode, block, len)) {
 		ext4_error(sb, "Allocating blocks %llu-%llu which overlap "
 			   "fs metadata", block, block+len);
 		/* File system mounted not to panic on error
@@ -4783,7 +4783,7 @@ void ext4_free_blocks(handle_t *handle,
 
 	sbi = EXT4_SB(sb);
 	if (!(flags & EXT4_FREE_BLOCKS_VALIDATED) &&
-	    !ext4_data_block_valid(sbi, block, count)) {
+	    !ext4_inode_block_valid(inode, block, count)) {
 		ext4_error(sb, "Freeing blocks not in datazone - "
 			   "block = %llu, count = %lu", block, count);
 		goto error_return;

[PATCH 4.14 04/43] bpf: Fix off-by-one for area size in creating mask to left

[Greg Kroah-Hartman]

From: Piotr Krysiuk <piotras@gmail.com>

commit 10d2bb2e6b1d8c4576c56a748f697dbeb8388899 upstream.

retrieve_ptr_limit() computes the ptr_limit for registers with stack and
map_value type. ptr_limit is the size of the memory area that is still
valid / in-bounds from the point of the current position and direction
of the operation (add / sub). This size will later be used for masking
the operation such that attempting out-of-bounds access in the speculative
domain is redirected to remain within the bounds of the current map value.

When masking to the right the size is correct, however, when masking to
the left, the size is off-by-one which would lead to an incorrect mask
and thus incorrect arithmetic operation in the non-speculative domain.
Piotr found that if the resulting alu_limit value is zero, then the
BPF_MOV32_IMM() from the fixup_bpf_calls() rewrite will end up loading
0xffffffff into AX instead of sign-extending to the full 64 bit range,
and as a result, this allows abuse for executing speculatively out-of-
bounds loads against 4GB window of address space and thus extracting the
contents of kernel memory via side-channel.

Fixes: 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic")
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/bpf/verifier.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2035,13 +2035,13 @@ static int retrieve_ptr_limit(const stru
 	case PTR_TO_STACK:
 		off = ptr_reg->off + ptr_reg->var_off.value;
 		if (mask_to_left)
-			*ptr_limit = MAX_BPF_STACK + off;
+			*ptr_limit = MAX_BPF_STACK + off + 1;
 		else
 			*ptr_limit = -off;
 		return 0;
 	case PTR_TO_MAP_VALUE:
 		if (mask_to_left) {
-			*ptr_limit = ptr_reg->umax_value + ptr_reg->off;
+			*ptr_limit = ptr_reg->umax_value + ptr_reg->off + 1;
 		} else {
 			off = ptr_reg->smin_value + ptr_reg->off;
 			*ptr_limit = ptr_reg->map_ptr->value_size - off;

[PATCH 4.14 05/43] bpf: Simplify alu_limit masking for pointer arithmetic

[Greg Kroah-Hartman]

From: Piotr Krysiuk <piotras@gmail.com>

commit b5871dca250cd391885218b99cc015aca1a51aea upstream.

Instead of having the mov32 with aux->alu_limit - 1 immediate, move this
operation to retrieve_ptr_limit() instead to simplify the logic and to
allow for subsequent sanity boundary checks inside retrieve_ptr_limit().
This avoids in future that at the time of the verifier masking rewrite
we'd run into an underflow which would not sign extend due to the nature
of mov32 instruction.

Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/bpf/verifier.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2035,16 +2035,16 @@ static int retrieve_ptr_limit(const stru
 	case PTR_TO_STACK:
 		off = ptr_reg->off + ptr_reg->var_off.value;
 		if (mask_to_left)
-			*ptr_limit = MAX_BPF_STACK + off + 1;
+			*ptr_limit = MAX_BPF_STACK + off;
 		else
-			*ptr_limit = -off;
+			*ptr_limit = -off - 1;
 		return 0;
 	case PTR_TO_MAP_VALUE:
 		if (mask_to_left) {
-			*ptr_limit = ptr_reg->umax_value + ptr_reg->off + 1;
+			*ptr_limit = ptr_reg->umax_value + ptr_reg->off;
 		} else {
 			off = ptr_reg->smin_value + ptr_reg->off;
-			*ptr_limit = ptr_reg->map_ptr->value_size - off;
+			*ptr_limit = ptr_reg->map_ptr->value_size - off - 1;
 		}
 		return 0;
 	default:
@@ -4802,7 +4802,7 @@ static int fixup_bpf_calls(struct bpf_ve
 			off_reg = issrc ? insn->src_reg : insn->dst_reg;
 			if (isneg)
 				*patch++ = BPF_ALU64_IMM(BPF_MUL, off_reg, -1);
-			*patch++ = BPF_MOV32_IMM(BPF_REG_AX, aux->alu_limit - 1);
+			*patch++ = BPF_MOV32_IMM(BPF_REG_AX, aux->alu_limit);
 			*patch++ = BPF_ALU64_REG(BPF_SUB, BPF_REG_AX, off_reg);
 			*patch++ = BPF_ALU64_REG(BPF_OR, BPF_REG_AX, off_reg);
 			*patch++ = BPF_ALU64_IMM(BPF_NEG, BPF_REG_AX, 0);

[PATCH 4.14 06/43] bpf: Add sanity check for upper ptr_limit

[Greg Kroah-Hartman]

From: Piotr Krysiuk <piotras@gmail.com>

commit 1b1597e64e1a610c7a96710fc4717158e98a08b3 upstream.

Given we know the max possible value of ptr_limit at the time of retrieving
the latter, add basic assertions, so that the verifier can bail out if
anything looks odd and reject the program. Nothing triggered this so far,
but it also does not hurt to have these.

Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/bpf/verifier.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2029,24 +2029,29 @@ static int retrieve_ptr_limit(const stru
 {
 	bool mask_to_left = (opcode == BPF_ADD &&  off_is_neg) ||
 			    (opcode == BPF_SUB && !off_is_neg);
-	u32 off;
+	u32 off, max;
 
 	switch (ptr_reg->type) {
 	case PTR_TO_STACK:
+		/* Offset 0 is out-of-bounds, but acceptable start for the
+		 * left direction, see BPF_REG_FP.
+		 */
+		max = MAX_BPF_STACK + mask_to_left;
 		off = ptr_reg->off + ptr_reg->var_off.value;
 		if (mask_to_left)
 			*ptr_limit = MAX_BPF_STACK + off;
 		else
 			*ptr_limit = -off - 1;
-		return 0;
+		return *ptr_limit >= max ? -ERANGE : 0;
 	case PTR_TO_MAP_VALUE:
+		max = ptr_reg->map_ptr->value_size;
 		if (mask_to_left) {
 			*ptr_limit = ptr_reg->umax_value + ptr_reg->off;
 		} else {
 			off = ptr_reg->smin_value + ptr_reg->off;
 			*ptr_limit = ptr_reg->map_ptr->value_size - off - 1;
 		}
-		return 0;
+		return *ptr_limit >= max ? -ERANGE : 0;
 	default:
 		return -EINVAL;
 	}

[PATCH 4.14 07/43] net: dsa: b53: Support setting learning on port

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

commit f9b3827ee66cfcf297d0acd6ecf33653a5f297ef upstream.

Add support for being able to set the learning attribute on port, and
make sure that the standalone ports start up with learning disabled.

We can remove the code in bcm_sf2 that configured the ports learning
attribute because we want the standalone ports to have learning disabled
by default and port 7 cannot be bridged, so its learning attribute will
not change past its initial configuration.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/dsa/b53/b53_common.c |   20 ++++++++++++++++++++
 drivers/net/dsa/b53/b53_regs.h   |    1 +
 drivers/net/dsa/bcm_sf2.c        |    5 +++++
 drivers/net/dsa/bcm_sf2_regs.h   |    2 ++
 4 files changed, 28 insertions(+)

--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -501,6 +501,19 @@ static void b53_imp_vlan_setup(struct ds
 	}
 }
 
+static void b53_port_set_learning(struct b53_device *dev, int port,
+				  bool learning)
+{
+	u16 reg;
+
+	b53_read16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, &reg);
+	if (learning)
+		reg &= ~BIT(port);
+	else
+		reg |= BIT(port);
+	b53_write16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, reg);
+}
+
 static int b53_enable_port(struct dsa_switch *ds, int port,
 			   struct phy_device *phy)
 {
@@ -508,6 +521,8 @@ static int b53_enable_port(struct dsa_sw
 	unsigned int cpu_port = dev->cpu_port;
 	u16 pvlan;
 
+	b53_port_set_learning(dev, port, false);
+
 	/* Clear the Rx and Tx disable bits and set to no spanning tree */
 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0);
 
@@ -551,6 +566,8 @@ static void b53_enable_cpu_port(struct b
 		    PORT_CTRL_RX_MCST_EN |
 		    PORT_CTRL_RX_UCST_EN;
 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(cpu_port), port_ctrl);
+
+	b53_port_set_learning(dev, cpu_port, false);
 }
 
 static void b53_enable_mib(struct b53_device *dev)
@@ -1342,6 +1359,8 @@ int b53_br_join(struct dsa_switch *ds, i
 	b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
 	dev->ports[port].vlan_ctl_mask = pvlan;
 
+	b53_port_set_learning(dev, port, true);
+
 	return 0;
 }
 EXPORT_SYMBOL(b53_br_join);
@@ -1392,6 +1411,7 @@ void b53_br_leave(struct dsa_switch *ds,
 		vl->untag |= BIT(port) | BIT(dev->cpu_port);
 		b53_set_vlan_entry(dev, pvid, vl);
 	}
+	b53_port_set_learning(dev, port, false);
 }
 EXPORT_SYMBOL(b53_br_leave);
 
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -112,6 +112,7 @@
 #define B53_UC_FLOOD_MASK		0x32
 #define B53_MC_FLOOD_MASK		0x34
 #define B53_IPMC_FLOOD_MASK		0x36
+#define B53_DIS_LEARNING		0x3c
 
 /*
  * Override Ports 0-7 State on devices with xMII interfaces (8 bit)
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -252,6 +252,11 @@ static int bcm_sf2_port_setup(struct dsa
 	reg &= ~P_TXQ_PSM_VDD(port);
 	core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
 
+	/* Disable learning */
+	reg = core_readl(priv, CORE_DIS_LEARN);
+	reg |= BIT(port);
+	core_writel(priv, reg, CORE_DIS_LEARN);
+
 	/* Enable Broadcom tags for that port if requested */
 	if (priv->brcm_tag_mask & BIT(port))
 		bcm_sf2_brcm_hdr_setup(priv, port);
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -150,6 +150,8 @@ enum bcm_sf2_reg_offs {
 #define CORE_SWITCH_CTRL		0x00088
 #define  MII_DUMB_FWDG_EN		(1 << 6)
 
+#define CORE_DIS_LEARN			0x000f0
+
 #define CORE_SFT_LRN_CTRL		0x000f8
 #define  SW_LEARN_CNTL(x)		(1 << (x))
 

[PATCH 4.14 08/43] bpf: Prohibit alu ops for pointer types not defining ptr_limit

[Greg Kroah-Hartman]

From: Piotr Krysiuk <piotras@gmail.com>

commit f232326f6966cf2a1d1db7bc917a4ce5f9f55f76 upstream.

The purpose of this patch is to streamline error propagation and in particular
to propagate retrieve_ptr_limit() errors for pointer types that are not defining
a ptr_limit such that register-based alu ops against these types can be rejected.

The main rationale is that a gap has been identified by Piotr in the existing
protection against speculatively out-of-bounds loads, for example, in case of
ctx pointers, unprivileged programs can still perform pointer arithmetic. This
can be abused to execute speculatively out-of-bounds loads without restrictions
and thus extract contents of kernel memory.

Fix this by rejecting unprivileged programs that attempt any pointer arithmetic
on unprotected pointer types. The two affected ones are pointer to ctx as well
as pointer to map. Field access to a modified ctx' pointer is rejected at a
later point in time in the verifier, and 7c6967326267 ("bpf: Permit map_ptr
arithmetic with opcode add and offset 0") only relevant for root-only use cases.
Risk of unprivileged program breakage is considered very low.

Fixes: 7c6967326267 ("bpf: Permit map_ptr arithmetic with opcode add and offset 0")
Fixes: b2157399cc98 ("bpf: prevent out-of-bounds speculation")
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/bpf/verifier.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2104,6 +2104,7 @@ static int sanitize_ptr_alu(struct bpf_v
 	u32 alu_state, alu_limit;
 	struct bpf_reg_state tmp;
 	bool ret;
+	int err;
 
 	if (can_skip_alu_sanitation(env, insn))
 		return 0;
@@ -2119,10 +2120,13 @@ static int sanitize_ptr_alu(struct bpf_v
 	alu_state |= ptr_is_dst_reg ?
 		     BPF_ALU_SANITIZE_SRC : BPF_ALU_SANITIZE_DST;
 
-	if (retrieve_ptr_limit(ptr_reg, &alu_limit, opcode, off_is_neg))
-		return 0;
-	if (update_alu_sanitation_state(aux, alu_state, alu_limit))
-		return -EACCES;
+	err = retrieve_ptr_limit(ptr_reg, &alu_limit, opcode, off_is_neg);
+	if (err < 0)
+		return err;
+
+	err = update_alu_sanitation_state(aux, alu_state, alu_limit);
+	if (err < 0)
+		return err;
 do_sim:
 	/* Simulate and find potential out-of-bounds access under
 	 * speculative execution from truncation as a result of
@@ -2215,7 +2219,7 @@ static int adjust_ptr_min_max_vals(struc
 	case BPF_ADD:
 		ret = sanitize_ptr_alu(env, insn, ptr_reg, dst_reg, smin_val < 0);
 		if (ret < 0) {
-			verbose("R%d tried to add from different maps or paths\n", dst);
+			verbose("R%d tried to add from different maps, paths, or prohibited types\n", dst);
 			return ret;
 		}
 		/* We can take a fixed offset as long as it doesn't overflow
@@ -2270,7 +2274,7 @@ static int adjust_ptr_min_max_vals(struc
 	case BPF_SUB:
 		ret = sanitize_ptr_alu(env, insn, ptr_reg, dst_reg, smin_val < 0);
 		if (ret < 0) {
-			verbose("R%d tried to sub from different maps or paths\n", dst);
+			verbose("R%d tried to sub from different maps, paths, or prohibited types\n", dst);
 			return ret;
 		}
 		if (dst_reg == off_reg) {

[PATCH 4.14 09/43] Revert "PM: runtime: Update device status before letting suppliers suspend"

[Greg Kroah-Hartman]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

commit 0cab893f409c53634d0d818fa414641cbcdb0dab upstream.

Revert commit 44cc89f76464 ("PM: runtime: Update device status
before letting suppliers suspend") that introduced a race condition
into __rpm_callback() which allowed a concurrent rpm_resume() to
run and resume the device prematurely after its status had been
changed to RPM_SUSPENDED by __rpm_callback().

Fixes: 44cc89f76464 ("PM: runtime: Update device status before letting suppliers suspend")
Link: https://lore.kernel.org/linux-pm/24dfb6fc-5d54-6ee2-9195-26428b7ecf8a@intel.com/
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/base/power/runtime.c |   62 +++++++++++++++++--------------------------
 1 file changed, 25 insertions(+), 37 deletions(-)

--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -306,22 +306,22 @@ static void rpm_put_suppliers(struct dev
 static int __rpm_callback(int (*cb)(struct device *), struct device *dev)
 	__releases(&dev->power.lock) __acquires(&dev->power.lock)
 {
-	bool use_links = dev->power.links_count > 0;
-	bool get = false;
 	int retval, idx;
-	bool put;
+	bool use_links = dev->power.links_count > 0;
 
 	if (dev->power.irq_safe) {
 		spin_unlock(&dev->power.lock);
-	} else if (!use_links) {
-		spin_unlock_irq(&dev->power.lock);
 	} else {
-		get = dev->power.runtime_status == RPM_RESUMING;
-
 		spin_unlock_irq(&dev->power.lock);
 
-		/* Resume suppliers if necessary. */
-		if (get) {
+		/*
+		 * Resume suppliers if necessary.
+		 *
+		 * The device's runtime PM status cannot change until this
+		 * routine returns, so it is safe to read the status outside of
+		 * the lock.
+		 */
+		if (use_links && dev->power.runtime_status == RPM_RESUMING) {
 			idx = device_links_read_lock();
 
 			retval = rpm_get_suppliers(dev);
@@ -336,36 +336,24 @@ static int __rpm_callback(int (*cb)(stru
 
 	if (dev->power.irq_safe) {
 		spin_lock(&dev->power.lock);
-		return retval;
-	}
-
-	spin_lock_irq(&dev->power.lock);
-
-	if (!use_links)
-		return retval;
-
-	/*
-	 * If the device is suspending and the callback has returned success,
-	 * drop the usage counters of the suppliers that have been reference
-	 * counted on its resume.
-	 *
-	 * Do that if the resume fails too.
-	 */
-	put = dev->power.runtime_status == RPM_SUSPENDING && !retval;
-	if (put)
-		__update_runtime_status(dev, RPM_SUSPENDED);
-	else
-		put = get && retval;
-
-	if (put) {
-		spin_unlock_irq(&dev->power.lock);
-
-		idx = device_links_read_lock();
+	} else {
+		/*
+		 * If the device is suspending and the callback has returned
+		 * success, drop the usage counters of the suppliers that have
+		 * been reference counted on its resume.
+		 *
+		 * Do that if resume fails too.
+		 */
+		if (use_links
+		    && ((dev->power.runtime_status == RPM_SUSPENDING && !retval)
+		    || (dev->power.runtime_status == RPM_RESUMING && retval))) {
+			idx = device_links_read_lock();
 
-fail:
-		rpm_put_suppliers(dev);
+ fail:
+			rpm_put_suppliers(dev);
 
-		device_links_read_unlock(idx);
+			device_links_read_unlock(idx);
+		}
 
 		spin_lock_irq(&dev->power.lock);
 	}

[PATCH 4.14 10/43] perf tools: Use %define api.pure full instead of %pure-parser

[Greg Kroah-Hartman]

From: Jiri Olsa <jolsa@redhat.com>

commit fc8c0a99223367b071c83711259d754b6bb7a379 upstream.

bison deprecated the "%pure-parser" directive in favor of "%define
api.pure full".

The api.pure got introduced in bison 2.3 (Oct 2007), so it seems safe to
use it without any version check.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200112192259.GA35080@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/expr.y         |    3 ++-
 tools/perf/util/parse-events.y |    2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

--- a/tools/perf/util/expr.y
+++ b/tools/perf/util/expr.y
@@ -10,7 +10,8 @@
 #define MAXIDLEN 256
 %}
 
-%pure-parser
+%define api.pure full
+
 %parse-param { double *final_val }
 %parse-param { struct parse_ctx *ctx }
 %parse-param { const char **pp }
--- a/tools/perf/util/parse-events.y
+++ b/tools/perf/util/parse-events.y
@@ -1,4 +1,4 @@
-%pure-parser
+%define api.pure full
 %parse-param {void *_parse_state}
 %parse-param {void *scanner}
 %lex-param {void* scanner}

[PATCH 4.14 11/43] tools build feature: Check if get_current_dir_name() is available

[Greg Kroah-Hartman]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

commit 8feb8efef97a134933620071e0b6384cb3238b4e upstream.

As the namespace support code will use this, which is not available in
some non _GNU_SOURCE libraries such as Android's bionic used in my
container build tests (r12b and r15c at the moment).

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-x56ypm940pwclwu45d7jfj47@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/build/Makefile.feature                    |    1 +
 tools/build/feature/Makefile                    |    4 ++++
 tools/build/feature/test-all.c                  |    5 +++++
 tools/build/feature/test-get_current_dir_name.c |   10 ++++++++++
 tools/perf/Makefile.config                      |    5 +++++
 tools/perf/util/Build                           |    1 +
 tools/perf/util/get_current_dir_name.c          |   18 ++++++++++++++++++
 tools/perf/util/util.h                          |    4 ++++
 8 files changed, 48 insertions(+)
 create mode 100644 tools/build/feature/test-get_current_dir_name.c
 create mode 100644 tools/perf/util/get_current_dir_name.c

--- a/tools/build/Makefile.feature
+++ b/tools/build/Makefile.feature
@@ -33,6 +33,7 @@ FEATURE_TESTS_BASIC :=
         dwarf_getlocations              \
         fortify-source                  \
         sync-compare-and-swap           \
+        get_current_dir_name            \
         glibc                           \
         gtk2                            \
         gtk2-infobar                    \
--- a/tools/build/feature/Makefile
+++ b/tools/build/feature/Makefile
@@ -7,6 +7,7 @@ FILES=
          test-dwarf_getlocations.bin            \
          test-fortify-source.bin                \
          test-sync-compare-and-swap.bin         \
+         test-get_current_dir_name.bin          \
          test-glibc.bin                         \
          test-gtk2.bin                          \
          test-gtk2-infobar.bin                  \
@@ -89,6 +90,9 @@ $(OUTPUT)test-bionic.bin:
 $(OUTPUT)test-libelf.bin:
 	$(BUILD) -lelf
 
+$(OUTPUT)test-get_current_dir_name.bin:
+	$(BUILD)
+
 $(OUTPUT)test-glibc.bin:
 	$(BUILD)
 
--- a/tools/build/feature/test-all.c
+++ b/tools/build/feature/test-all.c
@@ -34,6 +34,10 @@
 # include "test-libelf-mmap.c"
 #undef main
 
+#define main main_test_get_current_dir_name
+# include "test-get_current_dir_name.c"
+#undef main
+
 #define main main_test_glibc
 # include "test-glibc.c"
 #undef main
@@ -166,6 +170,7 @@ int main(int argc, char *argv[])
 	main_test_hello();
 	main_test_libelf();
 	main_test_libelf_mmap();
+	main_test_get_current_dir_name();
 	main_test_glibc();
 	main_test_dwarf();
 	main_test_dwarf_getlocations();
--- /dev/null
+++ b/tools/build/feature/test-get_current_dir_name.c
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+#define _GNU_SOURCE
+#include <unistd.h>
+#include <stdlib.h>
+
+int main(void)
+{
+	free(get_current_dir_name());
+	return 0;
+}
--- a/tools/perf/Makefile.config
+++ b/tools/perf/Makefile.config
@@ -281,6 +281,11 @@ ifndef NO_BIONIC
   endif
 endif
 
+ifeq ($(feature-get_current_dir_name), 1)
+  CFLAGS += -DHAVE_GET_CURRENT_DIR_NAME
+endif
+
+
 ifdef NO_LIBELF
   NO_DWARF := 1
   NO_DEMANGLE := 1
--- a/tools/perf/util/Build
+++ b/tools/perf/util/Build
@@ -10,6 +10,7 @@ libperf-y += evlist.o
 libperf-y += evsel.o
 libperf-y += evsel_fprintf.o
 libperf-y += find_bit.o
+libperf-y += get_current_dir_name.o
 libperf-y += kallsyms.o
 libperf-y += levenshtein.o
 libperf-y += llvm-utils.o
--- /dev/null
+++ b/tools/perf/util/get_current_dir_name.c
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+//
+#ifndef HAVE_GET_CURRENT_DIR_NAME
+#include "util.h"
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdlib.h>
+
+/* Android's 'bionic' library, for one, doesn't have this */
+
+char *get_current_dir_name(void)
+{
+	char pwd[PATH_MAX];
+
+	return getcwd(pwd, sizeof(pwd)) == NULL ? NULL : strdup(pwd);
+}
+#endif // HAVE_GET_CURRENT_DIR_NAME
--- a/tools/perf/util/util.h
+++ b/tools/perf/util/util.h
@@ -57,6 +57,10 @@ int fetch_kernel_version(unsigned int *p
 
 const char *perf_tip(const char *dirpath);
 
+#ifndef HAVE_GET_CURRENT_DIR_NAME
+char *get_current_dir_name(void);
+#endif
+
 #ifndef HAVE_SCHED_GETCPU_SUPPORT
 int sched_getcpu(void);
 #endif

[PATCH 4.14 12/43] tools build feature: Check if eventfd() is available

[Greg Kroah-Hartman]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

commit 11c6cbe706f218a8dc7e1f962f12b3a52ddd33a9 upstream.

A new 'perf bench epoll' will use this, and to disable it for older
systems, add a feature test for this API.

This is just a simple program that if successfully compiled, means that
the feature is present, at least at the library level, in a build that
sets the output directory to /tmp/build/perf (using O=/tmp/build/perf),
we end up with:

  $ ls -la /tmp/build/perf/feature/test-eventfd*
  -rwxrwxr-x. 1 acme acme 8176 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.bin
  -rw-rw-r--. 1 acme acme  588 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.d
  -rw-rw-r--. 1 acme acme    0 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.make.output
  $ ldd /tmp/build/perf/feature/test-eventfd.bin
	  linux-vdso.so.1 (0x00007fff3bf3f000)
	  libc.so.6 => /lib64/libc.so.6 (0x00007fa984061000)
	  /lib64/ld-linux-x86-64.so.2 (0x00007fa984417000)
  $ grep eventfd -A 2 -B 2 /tmp/build/perf/FEATURE-DUMP
  feature-dwarf=1
  feature-dwarf_getlocations=1
  feature-eventfd=1
  feature-fortify-source=1
  feature-sync-compare-and-swap=1
  $

The main thing here is that in the end we'll have -DHAVE_EVENTFD in
CFLAGS, and then the 'perf bench' entry needing that API can be
selectively pruned.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-wkeldwob7dpx6jvtuzl8164k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/build/Makefile.feature       |    1 +
 tools/build/feature/Makefile       |    4 ++++
 tools/build/feature/test-all.c     |    5 +++++
 tools/build/feature/test-eventfd.c |    9 +++++++++
 tools/perf/Makefile.config         |    5 ++++-
 5 files changed, 23 insertions(+), 1 deletion(-)
 create mode 100644 tools/build/feature/test-eventfd.c

--- a/tools/build/Makefile.feature
+++ b/tools/build/Makefile.feature
@@ -31,6 +31,7 @@ FEATURE_TESTS_BASIC :=
         backtrace                       \
         dwarf                           \
         dwarf_getlocations              \
+        eventfd                         \
         fortify-source                  \
         sync-compare-and-swap           \
         get_current_dir_name            \
--- a/tools/build/feature/Makefile
+++ b/tools/build/feature/Makefile
@@ -5,6 +5,7 @@ FILES=
          test-bionic.bin                        \
          test-dwarf.bin                         \
          test-dwarf_getlocations.bin            \
+         test-eventfd.bin                       \
          test-fortify-source.bin                \
          test-sync-compare-and-swap.bin         \
          test-get_current_dir_name.bin          \
@@ -90,6 +91,9 @@ $(OUTPUT)test-bionic.bin:
 $(OUTPUT)test-libelf.bin:
 	$(BUILD) -lelf
 
+$(OUTPUT)test-eventfd.bin:
+	$(BUILD)
+
 $(OUTPUT)test-get_current_dir_name.bin:
 	$(BUILD)
 
--- a/tools/build/feature/test-all.c
+++ b/tools/build/feature/test-all.c
@@ -50,6 +50,10 @@
 # include "test-dwarf_getlocations.c"
 #undef main
 
+#define main main_test_eventfd
+# include "test-eventfd.c"
+#undef main
+
 #define main main_test_libelf_getphdrnum
 # include "test-libelf-getphdrnum.c"
 #undef main
@@ -174,6 +178,7 @@ int main(int argc, char *argv[])
 	main_test_glibc();
 	main_test_dwarf();
 	main_test_dwarf_getlocations();
+	main_test_eventfd();
 	main_test_libelf_getphdrnum();
 	main_test_libelf_gelf_getnote();
 	main_test_libelf_getshdrstrndx();
--- /dev/null
+++ b/tools/build/feature/test-eventfd.c
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+
+#include <sys/eventfd.h>
+
+int main(void)
+{
+	return eventfd(0, EFD_NONBLOCK);
+}
--- a/tools/perf/Makefile.config
+++ b/tools/perf/Makefile.config
@@ -281,11 +281,14 @@ ifndef NO_BIONIC
   endif
 endif
 
+ifeq ($(feature-eventfd), 1)
+  CFLAGS += -DHAVE_EVENTFD
+endif
+
 ifeq ($(feature-get_current_dir_name), 1)
   CFLAGS += -DHAVE_GET_CURRENT_DIR_NAME
 endif
 
-
 ifdef NO_LIBELF
   NO_DWARF := 1
   NO_DEMANGLE := 1

[PATCH 4.14 13/43] tools build: Check if gettid() is available before providing helper

[Greg Kroah-Hartman]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

commit 4541a8bb13a86e504416a13360c8dc64d2fd612a upstream.

Laura reported that the perf build failed in fedora when we got a glibc
that provides gettid(), which I reproduced using fedora rawhide with the
glibc-devel-2.29.9000-26.fc31.x86_64 package.

Add a feature check to avoid providing a gettid() helper in such
systems.

On a fedora rawhide system with this patch applied we now get:

  [root@7a5f55352234 perf]# grep gettid /tmp/build/perf/FEATURE-DUMP
  feature-gettid=1
  [root@7a5f55352234 perf]# cat /tmp/build/perf/feature/test-gettid.make.output
  [root@7a5f55352234 perf]# ldd /tmp/build/perf/feature/test-gettid.bin
          linux-vdso.so.1 (0x00007ffc6b1f6000)
          libc.so.6 => /lib64/libc.so.6 (0x00007f04e0a74000)
          /lib64/ld-linux-x86-64.so.2 (0x00007f04e0c47000)
  [root@7a5f55352234 perf]# nm /tmp/build/perf/feature/test-gettid.bin | grep -w gettid
                   U gettid@@GLIBC_2.30
  [root@7a5f55352234 perf]#

While on a fedora:29 system:

  [acme@quaco perf]$ grep gettid /tmp/build/perf/FEATURE-DUMP
  feature-gettid=0
  [acme@quaco perf]$ cat /tmp/build/perf/feature/test-gettid.make.output
  test-gettid.c: In function ‘main’:
  test-gettid.c:8:9: error: implicit declaration of function ‘gettid’; did you mean ‘getgid’? [-Werror=implicit-function-declaration]
    return gettid();
           ^~~~~~
           getgid
  cc1: all warnings being treated as errors
  [acme@quaco perf]$

Reported-by: Laura Abbott <labbott@redhat.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lkml.kernel.org/n/tip-yfy3ch53agmklwu9o7rlgf9c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/build/Makefile.feature      |    1 +
 tools/build/feature/Makefile      |    4 ++++
 tools/build/feature/test-all.c    |    5 +++++
 tools/build/feature/test-gettid.c |   11 +++++++++++
 tools/perf/Makefile.config        |    4 ++++
 tools/perf/jvmti/jvmti_agent.c    |    2 ++
 6 files changed, 27 insertions(+)
 create mode 100644 tools/build/feature/test-gettid.c

--- a/tools/build/Makefile.feature
+++ b/tools/build/Makefile.feature
@@ -35,6 +35,7 @@ FEATURE_TESTS_BASIC :=
         fortify-source                  \
         sync-compare-and-swap           \
         get_current_dir_name            \
+        gettid				\
         glibc                           \
         gtk2                            \
         gtk2-infobar                    \
--- a/tools/build/feature/Makefile
+++ b/tools/build/feature/Makefile
@@ -51,6 +51,7 @@ FILES=
          test-get_cpuid.bin                     \
          test-sdt.bin                           \
          test-cxx.bin                           \
+         test-gettid.bin			\
          test-jvmti.bin				\
          test-sched_getcpu.bin			\
          test-setns.bin
@@ -242,6 +243,9 @@ $(OUTPUT)test-sdt.bin:
 $(OUTPUT)test-cxx.bin:
 	$(BUILDXX) -std=gnu++11
 
+$(OUTPUT)test-gettid.bin:
+	$(BUILD)
+
 $(OUTPUT)test-jvmti.bin:
 	$(BUILD)
 
--- a/tools/build/feature/test-all.c
+++ b/tools/build/feature/test-all.c
@@ -38,6 +38,10 @@
 # include "test-get_current_dir_name.c"
 #undef main
 
+#define main main_test_gettid
+# include "test-gettid.c"
+#undef main
+
 #define main main_test_glibc
 # include "test-glibc.c"
 #undef main
@@ -175,6 +179,7 @@ int main(int argc, char *argv[])
 	main_test_libelf();
 	main_test_libelf_mmap();
 	main_test_get_current_dir_name();
+	main_test_gettid();
 	main_test_glibc();
 	main_test_dwarf();
 	main_test_dwarf_getlocations();
--- /dev/null
+++ b/tools/build/feature/test-gettid.c
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2019, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+#define _GNU_SOURCE
+#include <unistd.h>
+
+int main(void)
+{
+	return gettid();
+}
+
+#undef _GNU_SOURCE
--- a/tools/perf/Makefile.config
+++ b/tools/perf/Makefile.config
@@ -289,6 +289,10 @@ ifeq ($(feature-get_current_dir_name), 1
   CFLAGS += -DHAVE_GET_CURRENT_DIR_NAME
 endif
 
+ifeq ($(feature-gettid), 1)
+  CFLAGS += -DHAVE_GETTID
+endif
+
 ifdef NO_LIBELF
   NO_DWARF := 1
   NO_DEMANGLE := 1
--- a/tools/perf/jvmti/jvmti_agent.c
+++ b/tools/perf/jvmti/jvmti_agent.c
@@ -45,10 +45,12 @@
 static char jit_path[PATH_MAX];
 static void *marker_addr;
 
+#ifndef HAVE_GETTID
 static inline pid_t gettid(void)
 {
 	return (pid_t)syscall(__NR_gettid);
 }
+#endif
 
 static int get_e_machine(struct jitheader *hdr)
 {

[PATCH 4.14 14/43] perf: Make perf able to build with latest libbfd

[Greg Kroah-Hartman]

From: Changbin Du <changbin.du@gmail.com>

commit 0ada120c883d4f1f6aafd01cf0fbb10d8bbba015 upstream.

libbfd has changed the bfd_section_* macros to inline functions
bfd_section_<field> since 2019-09-18. See below two commits:
  o http://www.sourceware.org/ml/gdb-cvs/2019-09/msg00064.html
  o https://www.sourceware.org/ml/gdb-cvs/2019-09/msg00072.html

This fix make perf able to build with both old and new libbfd.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200128152938.31413-1-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/srcline.c |   16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

--- a/tools/perf/util/srcline.c
+++ b/tools/perf/util/srcline.c
@@ -139,16 +139,30 @@ static void find_address_in_section(bfd
 	bfd_vma pc, vma;
 	bfd_size_type size;
 	struct a2l_data *a2l = data;
+	flagword flags;
 
 	if (a2l->found)
 		return;
 
-	if ((bfd_get_section_flags(abfd, section) & SEC_ALLOC) == 0)
+#ifdef bfd_get_section_flags
+	flags = bfd_get_section_flags(abfd, section);
+#else
+	flags = bfd_section_flags(section);
+#endif
+	if ((flags & SEC_ALLOC) == 0)
 		return;
 
 	pc = a2l->addr;
+#ifdef bfd_get_section_vma
 	vma = bfd_get_section_vma(abfd, section);
+#else
+	vma = bfd_section_vma(section);
+#endif
+#ifdef bfd_get_section_size
 	size = bfd_get_section_size(section);
+#else
+	size = bfd_section_size(section);
+#endif
 
 	if (pc < vma || pc >= vma + size)
 		return;

[PATCH 4.14 15/43] tools build feature: Check if pthread_barrier_t is available

[Greg Kroah-Hartman]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

commit 25ab5abf5b141d7fd13eed506c7458aa04749c29 upstream.

As 'perf bench futex wake-parallel" will use this, which is not
available in older systems such as versions of the android NDK used in
my container build tests (r12b and r15c at the moment).

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Yang <james.yang@arm.com
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-1i7iv54in4wj08lwo55b0pzv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/build/Makefile.feature               |    1 +
 tools/build/feature/Makefile               |    4 ++++
 tools/build/feature/test-all.c             |    5 +++++
 tools/build/feature/test-pthread-barrier.c |   12 ++++++++++++
 tools/perf/Makefile.config                 |    4 ++++
 5 files changed, 26 insertions(+)
 create mode 100644 tools/build/feature/test-pthread-barrier.c

--- a/tools/build/Makefile.feature
+++ b/tools/build/Makefile.feature
@@ -59,6 +59,7 @@ FEATURE_TESTS_BASIC :=
         libunwind-arm                   \
         libunwind-aarch64               \
         pthread-attr-setaffinity-np     \
+        pthread-barrier     		\
         stackprotector-all              \
         timerfd                         \
         libdw-dwarf-unwind              \
--- a/tools/build/feature/Makefile
+++ b/tools/build/feature/Makefile
@@ -39,6 +39,7 @@ FILES=
          test-libunwind-debug-frame-arm.bin     \
          test-libunwind-debug-frame-aarch64.bin \
          test-pthread-attr-setaffinity-np.bin   \
+         test-pthread-barrier.bin		\
          test-stackprotector-all.bin            \
          test-timerfd.bin                       \
          test-libdw-dwarf-unwind.bin            \
@@ -80,6 +81,9 @@ $(OUTPUT)test-hello.bin:
 $(OUTPUT)test-pthread-attr-setaffinity-np.bin:
 	$(BUILD) -D_GNU_SOURCE -lpthread
 
+$(OUTPUT)test-pthread-barrier.bin:
+	$(BUILD) -lpthread
+
 $(OUTPUT)test-stackprotector-all.bin:
 	$(BUILD) -fstack-protector-all
 
--- a/tools/build/feature/test-all.c
+++ b/tools/build/feature/test-all.c
@@ -130,6 +130,10 @@
 # include "test-pthread-attr-setaffinity-np.c"
 #undef main
 
+#define main main_test_pthread_barrier
+# include "test-pthread-barrier.c"
+#undef main
+
 #define main main_test_sched_getcpu
 # include "test-sched_getcpu.c"
 #undef main
@@ -202,6 +206,7 @@ int main(int argc, char *argv[])
 	main_test_sync_compare_and_swap(argc, argv);
 	main_test_zlib();
 	main_test_pthread_attr_setaffinity_np();
+	main_test_pthread_barrier();
 	main_test_lzma();
 	main_test_get_cpuid();
 	main_test_bpf();
--- /dev/null
+++ b/tools/build/feature/test-pthread-barrier.c
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <stdint.h>
+#include <pthread.h>
+
+int main(void)
+{
+	pthread_barrier_t barrier;
+
+	pthread_barrier_init(&barrier, NULL, 1);
+	pthread_barrier_wait(&barrier);
+	return pthread_barrier_destroy(&barrier);
+}
--- a/tools/perf/Makefile.config
+++ b/tools/perf/Makefile.config
@@ -272,6 +272,10 @@ ifeq ($(feature-pthread-attr-setaffinity
   CFLAGS += -DHAVE_PTHREAD_ATTR_SETAFFINITY_NP
 endif
 
+ifeq ($(feature-pthread-barrier), 1)
+  CFLAGS += -DHAVE_PTHREAD_BARRIER
+endif
+
 ifndef NO_BIONIC
   $(call feature_check,bionic)
   ifeq ($(feature-bionic), 1)

[PATCH 4.14 16/43] btrfs: fix race when cloning extent buffer during rewind of an old root

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit dbcc7d57bffc0c8cac9dac11bec548597d59a6a5 upstream.

While resolving backreferences, as part of a logical ino ioctl call or
fiemap, we can end up hitting a BUG_ON() when replaying tree mod log
operations of a root, triggering a stack trace like the following:

  ------------[ cut here ]------------
  kernel BUG at fs/btrfs/ctree.c:1210!
  invalid opcode: 0000 [#1] SMP KASAN PTI
  CPU: 1 PID: 19054 Comm: crawl_335 Tainted: G        W         5.11.0-2d11c0084b02-misc-next+ #89
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
  RIP: 0010:__tree_mod_log_rewind+0x3b1/0x3c0
  Code: 05 48 8d 74 10 (...)
  RSP: 0018:ffffc90001eb70b8 EFLAGS: 00010297
  RAX: 0000000000000000 RBX: ffff88812344e400 RCX: ffffffffb28933b6
  RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff88812344e42c
  RBP: ffffc90001eb7108 R08: 1ffff11020b60a20 R09: ffffed1020b60a20
  R10: ffff888105b050f9 R11: ffffed1020b60a1f R12: 00000000000000ee
  R13: ffff8880195520c0 R14: ffff8881bc958500 R15: ffff88812344e42c
  FS:  00007fd1955e8700(0000) GS:ffff8881f5600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007efdb7928718 CR3: 000000010103a006 CR4: 0000000000170ee0
  Call Trace:
   btrfs_search_old_slot+0x265/0x10d0
   ? lock_acquired+0xbb/0x600
   ? btrfs_search_slot+0x1090/0x1090
   ? free_extent_buffer.part.61+0xd7/0x140
   ? free_extent_buffer+0x13/0x20
   resolve_indirect_refs+0x3e9/0xfc0
   ? lock_downgrade+0x3d0/0x3d0
   ? __kasan_check_read+0x11/0x20
   ? add_prelim_ref.part.11+0x150/0x150
   ? lock_downgrade+0x3d0/0x3d0
   ? __kasan_check_read+0x11/0x20
   ? lock_acquired+0xbb/0x600
   ? __kasan_check_write+0x14/0x20
   ? do_raw_spin_unlock+0xa8/0x140
   ? rb_insert_color+0x30/0x360
   ? prelim_ref_insert+0x12d/0x430
   find_parent_nodes+0x5c3/0x1830
   ? resolve_indirect_refs+0xfc0/0xfc0
   ? lock_release+0xc8/0x620
   ? fs_reclaim_acquire+0x67/0xf0
   ? lock_acquire+0xc7/0x510
   ? lock_downgrade+0x3d0/0x3d0
   ? lockdep_hardirqs_on_prepare+0x160/0x210
   ? lock_release+0xc8/0x620
   ? fs_reclaim_acquire+0x67/0xf0
   ? lock_acquire+0xc7/0x510
   ? poison_range+0x38/0x40
   ? unpoison_range+0x14/0x40
   ? trace_hardirqs_on+0x55/0x120
   btrfs_find_all_roots_safe+0x142/0x1e0
   ? find_parent_nodes+0x1830/0x1830
   ? btrfs_inode_flags_to_xflags+0x50/0x50
   iterate_extent_inodes+0x20e/0x580
   ? tree_backref_for_extent+0x230/0x230
   ? lock_downgrade+0x3d0/0x3d0
   ? read_extent_buffer+0xdd/0x110
   ? lock_downgrade+0x3d0/0x3d0
   ? __kasan_check_read+0x11/0x20
   ? lock_acquired+0xbb/0x600
   ? __kasan_check_write+0x14/0x20
   ? _raw_spin_unlock+0x22/0x30
   ? __kasan_check_write+0x14/0x20
   iterate_inodes_from_logical+0x129/0x170
   ? iterate_inodes_from_logical+0x129/0x170
   ? btrfs_inode_flags_to_xflags+0x50/0x50
   ? iterate_extent_inodes+0x580/0x580
   ? __vmalloc_node+0x92/0xb0
   ? init_data_container+0x34/0xb0
   ? init_data_container+0x34/0xb0
   ? kvmalloc_node+0x60/0x80
   btrfs_ioctl_logical_to_ino+0x158/0x230
   btrfs_ioctl+0x205e/0x4040
   ? __might_sleep+0x71/0xe0
   ? btrfs_ioctl_get_supported_features+0x30/0x30
   ? getrusage+0x4b6/0x9c0
   ? __kasan_check_read+0x11/0x20
   ? lock_release+0xc8/0x620
   ? __might_fault+0x64/0xd0
   ? lock_acquire+0xc7/0x510
   ? lock_downgrade+0x3d0/0x3d0
   ? lockdep_hardirqs_on_prepare+0x210/0x210
   ? lockdep_hardirqs_on_prepare+0x210/0x210
   ? __kasan_check_read+0x11/0x20
   ? do_vfs_ioctl+0xfc/0x9d0
   ? ioctl_file_clone+0xe0/0xe0
   ? lock_downgrade+0x3d0/0x3d0
   ? lockdep_hardirqs_on_prepare+0x210/0x210
   ? __kasan_check_read+0x11/0x20
   ? lock_release+0xc8/0x620
   ? __task_pid_nr_ns+0xd3/0x250
   ? lock_acquire+0xc7/0x510
   ? __fget_files+0x160/0x230
   ? __fget_light+0xf2/0x110
   __x64_sys_ioctl+0xc3/0x100
   do_syscall_64+0x37/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7fd1976e2427
  Code: 00 00 90 48 8b 05 (...)
  RSP: 002b:00007fd1955e5cf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 00007fd1955e5f40 RCX: 00007fd1976e2427
  RDX: 00007fd1955e5f48 RSI: 00000000c038943b RDI: 0000000000000004
  RBP: 0000000001000000 R08: 0000000000000000 R09: 00007fd1955e6120
  R10: 0000557835366b00 R11: 0000000000000246 R12: 0000000000000004
  R13: 00007fd1955e5f48 R14: 00007fd1955e5f40 R15: 00007fd1955e5ef8
  Modules linked in:
  ---[ end trace ec8931a1c36e57be ]---

  (gdb) l *(__tree_mod_log_rewind+0x3b1)
  0xffffffff81893521 is in __tree_mod_log_rewind (fs/btrfs/ctree.c:1210).
  1205                     * the modification. as we're going backwards, we do the
  1206                     * opposite of each operation here.
  1207                     */
  1208                    switch (tm->op) {
  1209                    case MOD_LOG_KEY_REMOVE_WHILE_FREEING:
  1210                            BUG_ON(tm->slot < n);
  1211                            fallthrough;
  1212                    case MOD_LOG_KEY_REMOVE_WHILE_MOVING:
  1213                    case MOD_LOG_KEY_REMOVE:
  1214                            btrfs_set_node_key(eb, &tm->key, tm->slot);

Here's what happens to hit that BUG_ON():

1) We have one tree mod log user (through fiemap or the logical ino ioctl),
   with a sequence number of 1, so we have fs_info->tree_mod_seq == 1;

2) Another task is at ctree.c:balance_level() and we have eb X currently as
   the root of the tree, and we promote its single child, eb Y, as the new
   root.

   Then, at ctree.c:balance_level(), we call:

      tree_mod_log_insert_root(eb X, eb Y, 1);

3) At tree_mod_log_insert_root() we create tree mod log elements for each
   slot of eb X, of operation type MOD_LOG_KEY_REMOVE_WHILE_FREEING each
   with a ->logical pointing to ebX->start. These are placed in an array
   named tm_list.
   Lets assume there are N elements (N pointers in eb X);

4) Then, still at tree_mod_log_insert_root(), we create a tree mod log
   element of operation type MOD_LOG_ROOT_REPLACE, ->logical set to
   ebY->start, ->old_root.logical set to ebX->start, ->old_root.level set
   to the level of eb X and ->generation set to the generation of eb X;

5) Then tree_mod_log_insert_root() calls tree_mod_log_free_eb() with
   tm_list as argument. After that, tree_mod_log_free_eb() calls
   __tree_mod_log_insert() for each member of tm_list in reverse order,
   from highest slot in eb X, slot N - 1, to slot 0 of eb X;

6) __tree_mod_log_insert() sets the sequence number of each given tree mod
   log operation - it increments fs_info->tree_mod_seq and sets
   fs_info->tree_mod_seq as the sequence number of the given tree mod log
   operation.

   This means that for the tm_list created at tree_mod_log_insert_root(),
   the element corresponding to slot 0 of eb X has the highest sequence
   number (1 + N), and the element corresponding to the last slot has the
   lowest sequence number (2);

7) Then, after inserting tm_list's elements into the tree mod log rbtree,
   the MOD_LOG_ROOT_REPLACE element is inserted, which gets the highest
   sequence number, which is N + 2;

8) Back to ctree.c:balance_level(), we free eb X by calling
   btrfs_free_tree_block() on it. Because eb X was created in the current
   transaction, has no other references and writeback did not happen for
   it, we add it back to the free space cache/tree;

9) Later some other task T allocates the metadata extent from eb X, since
   it is marked as free space in the space cache/tree, and uses it as a
   node for some other btree;

10) The tree mod log user task calls btrfs_search_old_slot(), which calls
    get_old_root(), and finally that calls __tree_mod_log_oldest_root()
    with time_seq == 1 and eb_root == eb Y;

11) First iteration of the while loop finds the tree mod log element with
    sequence number N + 2, for the logical address of eb Y and of type
    MOD_LOG_ROOT_REPLACE;

12) Because the operation type is MOD_LOG_ROOT_REPLACE, we don't break out
    of the loop, and set root_logical to point to tm->old_root.logical
    which corresponds to the logical address of eb X;

13) On the next iteration of the while loop, the call to
    tree_mod_log_search_oldest() returns the smallest tree mod log element
    for the logical address of eb X, which has a sequence number of 2, an
    operation type of MOD_LOG_KEY_REMOVE_WHILE_FREEING and corresponds to
    the old slot N - 1 of eb X (eb X had N items in it before being freed);

14) We then break out of the while loop and return the tree mod log operation
    of type MOD_LOG_ROOT_REPLACE (eb Y), and not the one for slot N - 1 of
    eb X, to get_old_root();

15) At get_old_root(), we process the MOD_LOG_ROOT_REPLACE operation
    and set "logical" to the logical address of eb X, which was the old
    root. We then call tree_mod_log_search() passing it the logical
    address of eb X and time_seq == 1;

16) Then before calling tree_mod_log_search(), task T adds a key to eb X,
    which results in adding a tree mod log operation of type
    MOD_LOG_KEY_ADD to the tree mod log - this is done at
    ctree.c:insert_ptr() - but after adding the tree mod log operation
    and before updating the number of items in eb X from 0 to 1...

17) The task at get_old_root() calls tree_mod_log_search() and gets the
    tree mod log operation of type MOD_LOG_KEY_ADD just added by task T.
    Then it enters the following if branch:

    if (old_root && tm && tm->op != MOD_LOG_KEY_REMOVE_WHILE_FREEING) {
       (...)
    } (...)

    Calls read_tree_block() for eb X, which gets a reference on eb X but
    does not lock it - task T has it locked.
    Then it clones eb X while it has nritems set to 0 in its header, before
    task T sets nritems to 1 in eb X's header. From hereupon we use the
    clone of eb X which no other task has access to;

18) Then we call __tree_mod_log_rewind(), passing it the MOD_LOG_KEY_ADD
    mod log operation we just got from tree_mod_log_search() in the
    previous step and the cloned version of eb X;

19) At __tree_mod_log_rewind(), we set the local variable "n" to the number
    of items set in eb X's clone, which is 0. Then we enter the while loop,
    and in its first iteration we process the MOD_LOG_KEY_ADD operation,
    which just decrements "n" from 0 to (u32)-1, since "n" is declared with
    a type of u32. At the end of this iteration we call rb_next() to find the
    next tree mod log operation for eb X, that gives us the mod log operation
    of type MOD_LOG_KEY_REMOVE_WHILE_FREEING, for slot 0, with a sequence
    number of N + 1 (steps 3 to 6);

20) Then we go back to the top of the while loop and trigger the following
    BUG_ON():

        (...)
        switch (tm->op) {
        case MOD_LOG_KEY_REMOVE_WHILE_FREEING:
                 BUG_ON(tm->slot < n);
                 fallthrough;
        (...)

    Because "n" has a value of (u32)-1 (4294967295) and tm->slot is 0.

Fix this by taking a read lock on the extent buffer before cloning it at
ctree.c:get_old_root(). This should be done regardless of the extent
buffer having been freed and reused, as a concurrent task might be
modifying it (while holding a write lock on it).

Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/20210227155037.GN28049@hungrycats.org/
Fixes: 834328a8493079 ("Btrfs: tree mod log's old roots could still be part of the tree")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/ctree.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -1431,7 +1431,9 @@ get_old_root(struct btrfs_root *root, u6
 				   "failed to read tree block %llu from get_old_root",
 				   logical);
 		} else {
+			btrfs_tree_read_lock(old);
 			eb = btrfs_clone_extent_buffer(old);
+			btrfs_tree_read_unlock(old);
 			free_extent_buffer(old);
 		}
 	} else if (old_root) {

[PATCH 4.14 17/43] nvmet: dont check iosqes,iocqes for discovery controllers

[Greg Kroah-Hartman]

From: Sagi Grimberg <sagi@grimberg.me>

commit d218a8a3003e84ab136e69a4e30dd4ec7dab2d22 upstream.

>From the base spec, Figure 78:

  "Controller Configuration, these fields are defined as parameters to
   configure an "I/O Controller (IOC)" and not to configure a "Discovery
   Controller (DC).

   ...
   If the controller does not support I/O queues, then this field shall
   be read-only with a value of 0h

Just perform this check for I/O controllers.

Fixes: a07b4970f464 ("nvmet: add a generic NVMe target")
Reported-by: Belanger, Martin <Martin.Belanger@dell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nvme/target/core.c |   17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -594,9 +594,20 @@ static void nvmet_start_ctrl(struct nvme
 {
 	lockdep_assert_held(&ctrl->lock);
 
-	if (nvmet_cc_iosqes(ctrl->cc) != NVME_NVM_IOSQES ||
-	    nvmet_cc_iocqes(ctrl->cc) != NVME_NVM_IOCQES ||
-	    nvmet_cc_mps(ctrl->cc) != 0 ||
+	/*
+	 * Only I/O controllers should verify iosqes,iocqes.
+	 * Strictly speaking, the spec says a discovery controller
+	 * should verify iosqes,iocqes are zeroed, however that
+	 * would break backwards compatibility, so don't enforce it.
+	 */
+	if (ctrl->subsys->type != NVME_NQN_DISC &&
+	    (nvmet_cc_iosqes(ctrl->cc) != NVME_NVM_IOSQES ||
+	     nvmet_cc_iocqes(ctrl->cc) != NVME_NVM_IOCQES)) {
+		ctrl->csts = NVME_CSTS_CFS;
+		return;
+	}
+
+	if (nvmet_cc_mps(ctrl->cc) != 0 ||
 	    nvmet_cc_ams(ctrl->cc) != 0 ||
 	    nvmet_cc_css(ctrl->cc) != 0) {
 		ctrl->csts = NVME_CSTS_CFS;

[PATCH 4.14 18/43] NFSD: Repair misuse of sv_lock in 5.10.16-rt30.

[Greg Kroah-Hartman]

From: Joe Korty <joe.korty@concurrent-rt.com>

commit c7de87ff9dac5f396f62d584f3908f80ddc0e07b upstream.

[ This problem is in mainline, but only rt has the chops to be
able to detect it. ]

Lockdep reports a circular lock dependency between serv->sv_lock and
softirq_ctl.lock on system shutdown, when using a kernel built with
CONFIG_PREEMPT_RT=y, and a nfs mount exists.

This is due to the definition of spin_lock_bh on rt:

	local_bh_disable();
	rt_spin_lock(lock);

which forces a softirq_ctl.lock -> serv->sv_lock dependency.  This is
not a problem as long as _every_ lock of serv->sv_lock is a:

	spin_lock_bh(&serv->sv_lock);

but there is one of the form:

	spin_lock(&serv->sv_lock);

This is what is causing the circular dependency splat.  The spin_lock()
grabs the lock without first grabbing softirq_ctl.lock via local_bh_disable.
If later on in the critical region,  someone does a local_bh_disable, we
get a serv->sv_lock -> softirq_ctrl.lock dependency established.  Deadlock.

Fix is to make serv->sv_lock be locked with spin_lock_bh everywhere, no
exceptions.

[  OK  ] Stopped target NFS client services.
         Stopping Logout off all iSCSI sessions on shutdown...
         Stopping NFS server and services...
[  109.442380]
[  109.442385] ======================================================
[  109.442386] WARNING: possible circular locking dependency detected
[  109.442387] 5.10.16-rt30 #1 Not tainted
[  109.442389] ------------------------------------------------------
[  109.442390] nfsd/1032 is trying to acquire lock:
[  109.442392] ffff994237617f60 ((softirq_ctrl.lock).lock){+.+.}-{2:2}, at: __local_bh_disable_ip+0xd9/0x270
[  109.442405]
[  109.442405] but task is already holding lock:
[  109.442406] ffff994245cb00b0 (&serv->sv_lock){+.+.}-{0:0}, at: svc_close_list+0x1f/0x90
[  109.442415]
[  109.442415] which lock already depends on the new lock.
[  109.442415]
[  109.442416]
[  109.442416] the existing dependency chain (in reverse order) is:
[  109.442417]
[  109.442417] -> #1 (&serv->sv_lock){+.+.}-{0:0}:
[  109.442421]        rt_spin_lock+0x2b/0xc0
[  109.442428]        svc_add_new_perm_xprt+0x42/0xa0
[  109.442430]        svc_addsock+0x135/0x220
[  109.442434]        write_ports+0x4b3/0x620
[  109.442438]        nfsctl_transaction_write+0x45/0x80
[  109.442440]        vfs_write+0xff/0x420
[  109.442444]        ksys_write+0x4f/0xc0
[  109.442446]        do_syscall_64+0x33/0x40
[  109.442450]        entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  109.442454]
[  109.442454] -> #0 ((softirq_ctrl.lock).lock){+.+.}-{2:2}:
[  109.442457]        __lock_acquire+0x1264/0x20b0
[  109.442463]        lock_acquire+0xc2/0x400
[  109.442466]        rt_spin_lock+0x2b/0xc0
[  109.442469]        __local_bh_disable_ip+0xd9/0x270
[  109.442471]        svc_xprt_do_enqueue+0xc0/0x4d0
[  109.442474]        svc_close_list+0x60/0x90
[  109.442476]        svc_close_net+0x49/0x1a0
[  109.442478]        svc_shutdown_net+0x12/0x40
[  109.442480]        nfsd_destroy+0xc5/0x180
[  109.442482]        nfsd+0x1bc/0x270
[  109.442483]        kthread+0x194/0x1b0
[  109.442487]        ret_from_fork+0x22/0x30
[  109.442492]
[  109.442492] other info that might help us debug this:
[  109.442492]
[  109.442493]  Possible unsafe locking scenario:
[  109.442493]
[  109.442493]        CPU0                    CPU1
[  109.442494]        ----                    ----
[  109.442495]   lock(&serv->sv_lock);
[  109.442496]                                lock((softirq_ctrl.lock).lock);
[  109.442498]                                lock(&serv->sv_lock);
[  109.442499]   lock((softirq_ctrl.lock).lock);
[  109.442501]
[  109.442501]  *** DEADLOCK ***
[  109.442501]
[  109.442501] 3 locks held by nfsd/1032:
[  109.442503]  #0: ffffffff93b49258 (nfsd_mutex){+.+.}-{3:3}, at: nfsd+0x19a/0x270
[  109.442508]  #1: ffff994245cb00b0 (&serv->sv_lock){+.+.}-{0:0}, at: svc_close_list+0x1f/0x90
[  109.442512]  #2: ffffffff93a81b20 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0x5/0xc0
[  109.442518]
[  109.442518] stack backtrace:
[  109.442519] CPU: 0 PID: 1032 Comm: nfsd Not tainted 5.10.16-rt30 #1
[  109.442522] Hardware name: Supermicro X9DRL-3F/iF/X9DRL-3F/iF, BIOS 3.2 09/22/2015
[  109.442524] Call Trace:
[  109.442527]  dump_stack+0x77/0x97
[  109.442533]  check_noncircular+0xdc/0xf0
[  109.442546]  __lock_acquire+0x1264/0x20b0
[  109.442553]  lock_acquire+0xc2/0x400
[  109.442564]  rt_spin_lock+0x2b/0xc0
[  109.442570]  __local_bh_disable_ip+0xd9/0x270
[  109.442573]  svc_xprt_do_enqueue+0xc0/0x4d0
[  109.442577]  svc_close_list+0x60/0x90
[  109.442581]  svc_close_net+0x49/0x1a0
[  109.442585]  svc_shutdown_net+0x12/0x40
[  109.442588]  nfsd_destroy+0xc5/0x180
[  109.442590]  nfsd+0x1bc/0x270
[  109.442595]  kthread+0x194/0x1b0
[  109.442600]  ret_from_fork+0x22/0x30
[  109.518225] nfsd: last server has exited, flushing export cache
[  OK  ] Stopped NFSv4 ID-name mapping service.
[  OK  ] Stopped GSSAPI Proxy Daemon.
[  OK  ] Stopped NFS Mount Daemon.
[  OK  ] Stopped NFS status monitor for NFSv2/3 locking..

Fixes: 719f8bcc883e ("svcrpc: fix xpt_list traversal locking on shutdown")
Signed-off-by: Joe Korty <joe.korty@concurrent-rt.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sunrpc/svc_xprt.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -1106,7 +1106,7 @@ static int svc_close_list(struct svc_ser
 	struct svc_xprt *xprt;
 	int ret = 0;
 
-	spin_lock(&serv->sv_lock);
+	spin_lock_bh(&serv->sv_lock);
 	list_for_each_entry(xprt, xprt_list, xpt_list) {
 		if (xprt->xpt_net != net)
 			continue;
@@ -1114,7 +1114,7 @@ static int svc_close_list(struct svc_ser
 		set_bit(XPT_CLOSE, &xprt->xpt_flags);
 		svc_xprt_enqueue(xprt);
 	}
-	spin_unlock(&serv->sv_lock);
+	spin_unlock_bh(&serv->sv_lock);
 	return ret;
 }
 

[PATCH 4.14 19/43] svcrdma: disable timeouts on rdma backchannel

[Greg Kroah-Hartman]

From: Timo Rothenpieler <timo@rothenpieler.org>

commit 6820bf77864d5894ff67b5c00d7dba8f92011e3d upstream.

This brings it in line with the regular tcp backchannel, which also has
all those timeouts disabled.

Prevents the backchannel from timing out, getting some async operations
like server side copying getting stuck indefinitely on the client side.

Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
Fixes: 5d252f90a800 ("svcrdma: Add class for RDMA backwards direction transport")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sunrpc/xprtrdma/svc_rdma_backchannel.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
@@ -321,9 +321,9 @@ xprt_setup_rdma_bc(struct xprt_create *a
 	xprt->timeout = &xprt_rdma_bc_timeout;
 	xprt_set_bound(xprt);
 	xprt_set_connected(xprt);
-	xprt->bind_timeout = RPCRDMA_BIND_TO;
-	xprt->reestablish_timeout = RPCRDMA_INIT_REEST_TO;
-	xprt->idle_timeout = RPCRDMA_IDLE_DISC_TO;
+	xprt->bind_timeout = 0;
+	xprt->reestablish_timeout = 0;
+	xprt->idle_timeout = 0;
 
 	xprt->prot = XPRT_TRANSPORT_BC_RDMA;
 	xprt->tsh_size = RPCRDMA_HDRLEN_MIN / sizeof(__be32);

[PATCH 4.14 20/43] sunrpc: fix refcount leak for rpc auth modules

[Greg Kroah-Hartman]

From: Daniel Kobras <kobras@puzzle-itc.de>

commit f1442d6349a2e7bb7a6134791bdc26cb776c79af upstream.

If an auth module's accept op returns SVC_CLOSE, svc_process_common()
enters a call path that does not call svc_authorise() before leaving the
function, and thus leaks a reference on the auth module's refcount. Hence,
make sure calls to svc_authenticate() and svc_authorise() are paired for
all call paths, to make sure rpc auth modules can be unloaded.

Signed-off-by: Daniel Kobras <kobras@puzzle-itc.de>
Fixes: 4d712ef1db05 ("svcauth_gss: Close connection when dropping an incoming message")
Link: https://lore.kernel.org/linux-nfs/3F1B347F-B809-478F-A1E9-0BE98E22B0F0@oracle.com/T/#t
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sunrpc/svc.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -1329,7 +1329,7 @@ svc_process_common(struct svc_rqst *rqst
 
  sendit:
 	if (svc_authorise(rqstp))
-		goto close;
+		goto close_xprt;
 	return 1;		/* Caller can now send it */
 
  dropit:
@@ -1338,6 +1338,8 @@ svc_process_common(struct svc_rqst *rqst
 	return 0;
 
  close:
+	svc_authorise(rqstp);
+close_xprt:
 	if (rqstp->rq_xprt && test_bit(XPT_TEMP, &rqstp->rq_xprt->xpt_flags))
 		svc_close_xprt(rqstp->rq_xprt);
 	dprintk("svc: svc_process close\n");
@@ -1346,7 +1348,7 @@ svc_process_common(struct svc_rqst *rqst
 err_short_len:
 	svc_printk(rqstp, "short len %zd, dropping request\n",
 			argv->iov_len);
-	goto close;
+	goto close_xprt;
 
 err_bad_rpc:
 	serv->sv_stats->rpcbadfmt++;

[PATCH 4.14 21/43] net/qrtr: fix __netdev_alloc_skb call

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

commit 093b036aa94e01a0bea31a38d7f0ee28a2749023 upstream.

syzbot found WARNING in __alloc_pages_nodemask()[1] when order >= MAX_ORDER.
It was caused by a huge length value passed from userspace to qrtr_tun_write_iter(),
which tries to allocate skb. Since the value comes from the untrusted source
there is no need to raise a warning in __alloc_pages_nodemask().

[1] WARNING in __alloc_pages_nodemask+0x5f8/0x730 mm/page_alloc.c:5014
Call Trace:
 __alloc_pages include/linux/gfp.h:511 [inline]
 __alloc_pages_node include/linux/gfp.h:524 [inline]
 alloc_pages_node include/linux/gfp.h:538 [inline]
 kmalloc_large_node+0x60/0x110 mm/slub.c:3999
 __kmalloc_node_track_caller+0x319/0x3f0 mm/slub.c:4496
 __kmalloc_reserve net/core/skbuff.c:150 [inline]
 __alloc_skb+0x4e4/0x5a0 net/core/skbuff.c:210
 __netdev_alloc_skb+0x70/0x400 net/core/skbuff.c:446
 netdev_alloc_skb include/linux/skbuff.h:2832 [inline]
 qrtr_endpoint_post+0x84/0x11b0 net/qrtr/qrtr.c:442
 qrtr_tun_write_iter+0x11f/0x1a0 net/qrtr/tun.c:98
 call_write_iter include/linux/fs.h:1901 [inline]
 new_sync_write+0x426/0x650 fs/read_write.c:518
 vfs_write+0x791/0xa30 fs/read_write.c:605
 ksys_write+0x12d/0x250 fs/read_write.c:658
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported-by: syzbot+80dccaee7c6630fa9dcf@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Acked-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/qrtr/qrtr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/qrtr/qrtr.c
+++ b/net/qrtr/qrtr.c
@@ -235,7 +235,7 @@ int qrtr_endpoint_post(struct qrtr_endpo
 	if (dst != QRTR_PORT_CTRL && type != QRTR_TYPE_DATA)
 		return -EINVAL;
 
-	skb = netdev_alloc_skb(NULL, len);
+	skb = __netdev_alloc_skb(NULL, len, GFP_ATOMIC | __GFP_NOWARN);
 	if (!skb)
 		return -ENOMEM;
 

[PATCH 4.14 22/43] scsi: lpfc: Fix some error codes in debugfs

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 19f1bc7edf0f97186810e13a88f5b62069d89097 upstream.

If copy_from_user() or kstrtoull() fail then the correct behavior is to
return a negative error code.

Link: https://lore.kernel.org/r/YEsbU/UxYypVrC7/@mwanda
Fixes: f9bb2da11db8 ("[SCSI] lpfc 8.3.27: T10 additions for SLI4")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_debugfs.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -1753,7 +1753,7 @@ lpfc_debugfs_dif_err_write(struct file *
 	memset(dstbuf, 0, 33);
 	size = (nbytes < 32) ? nbytes : 32;
 	if (copy_from_user(dstbuf, buf, size))
-		return 0;
+		return -EFAULT;
 
 	if (dent == phba->debug_InjErrLBA) {
 		if ((buf[0] == 'o') && (buf[1] == 'f') && (buf[2] == 'f'))
@@ -1761,7 +1761,7 @@ lpfc_debugfs_dif_err_write(struct file *
 	}
 
 	if ((tmp == 0) && (kstrtoull(dstbuf, 0, &tmp)))
-		return 0;
+		return -EINVAL;
 
 	if (dent == phba->debug_writeGuard)
 		phba->lpfc_injerr_wgrd_cnt = (uint32_t)tmp;

[PATCH 4.14 23/43] nvme-rdma: fix possible hang when failing to set io queues

[Greg Kroah-Hartman]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit c4c6df5fc84659690d4391d1fba155cd94185295 ]

We only setup io queues for nvme controllers, and it makes absolutely no
sense to allow a controller (re)connect without any I/O queues.  If we
happen to fail setting the queue count for any reason, we should not allow
this to be a successful reconnect as I/O has no chance in going through.
Instead just fail and schedule another reconnect.

Reported-by: Chao Leng <lengchao@huawei.com>
Fixes: 711023071960 ("nvme-rdma: add a NVMe over Fabrics RDMA host driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/rdma.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index 564e457f1345..57e1c0dd63c4 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -655,8 +655,11 @@ static int nvme_rdma_alloc_io_queues(struct nvme_rdma_ctrl *ctrl)
 		return ret;
 
 	ctrl->ctrl.queue_count = nr_io_queues + 1;
-	if (ctrl->ctrl.queue_count < 2)
-		return 0;
+	if (ctrl->ctrl.queue_count < 2) {
+		dev_err(ctrl->ctrl.device,
+			"unable to set any I/O queues\n");
+		return -ENOMEM;
+	}
 
 	dev_info(ctrl->ctrl.device,
 		"creating %d I/O queues.\n", nr_io_queues);
-- 
2.30.1

[PATCH 4.14 24/43] usb-storage: Add quirk to defeat Kindles automatic unload

[Greg Kroah-Hartman]

From: Alan Stern <stern@rowland.harvard.edu>

commit 546aa0e4ea6ed81b6c51baeebc4364542fa3f3a7 upstream.

Matthias reports that the Amazon Kindle automatically removes its
emulated media if it doesn't receive another SCSI command within about
one second after a SYNCHRONIZE CACHE.  It does so even when the host
has sent a PREVENT MEDIUM REMOVAL command.  The reason for this
behavior isn't clear, although it's not hard to make some guesses.

At any rate, the results can be unexpected for anyone who tries to
access the Kindle in an unusual fashion, and in theory they can lead
to data loss (for example, if one file is closed and synchronized
while other files are still in the middle of being written).

To avoid such problems, this patch creates a new usb-storage quirks
flag telling the driver always to issue a REQUEST SENSE following a
SYNCHRONIZE CACHE command, and adds an unusual_devs entry for the
Kindle with the flag set.  This is sufficient to prevent the Kindle
from doing its automatic unload, without interfering with proper
operation.

Another possible way to deal with this would be to increase the
frequency of TEST UNIT READY polling that the kernel normally carries
out for removable-media storage devices.  However that would increase
the overall load on the system and it is not as reliable, because the
user can override the polling interval.  Changing the driver's
behavior is safer and has minimal overhead.

CC: <stable@vger.kernel.org>
Reported-and-tested-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20210317190654.GA497856@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/storage/transport.c    |    7 +++++++
 drivers/usb/storage/unusual_devs.h |   12 ++++++++++++
 include/linux/usb_usual.h          |    2 ++
 3 files changed, 21 insertions(+)

--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -667,6 +667,13 @@ void usb_stor_invoke_transport(struct sc
 		need_auto_sense = 1;
 	}
 
+	/* Some devices (Kindle) require another command after SYNC CACHE */
+	if ((us->fflags & US_FL_SENSE_AFTER_SYNC) &&
+			srb->cmnd[0] == SYNCHRONIZE_CACHE) {
+		usb_stor_dbg(us, "-- sense after SYNC CACHE\n");
+		need_auto_sense = 1;
+	}
+
 	/*
 	 * If we have a failure, we're going to do a REQUEST_SENSE 
 	 * automatically.  Note that we differentiate between a command
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2231,6 +2231,18 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0
 		US_FL_NO_READ_DISC_INFO ),
 
 /*
+ * Reported by Matthias Schwarzott <zzam@gentoo.org>
+ * The Amazon Kindle treats SYNCHRONIZE CACHE as an indication that
+ * the host may be finished with it, and automatically ejects its
+ * emulated media unless it receives another command within one second.
+ */
+UNUSUAL_DEV( 0x1949, 0x0004, 0x0000, 0x9999,
+		"Amazon",
+		"Kindle",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SENSE_AFTER_SYNC ),
+
+/*
  * Reported by Oliver Neukum <oneukum@suse.com>
  * This device morphes spontaneously into another device if the access
  * pattern of Windows isn't followed. Thus writable media would be dirty
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -86,6 +86,8 @@
 		/* lies about caching, so always sync */	\
 	US_FLAG(NO_SAME, 0x40000000)				\
 		/* Cannot handle WRITE_SAME */			\
+	US_FLAG(SENSE_AFTER_SYNC, 0x80000000)			\
+		/* Do REQUEST_SENSE after SYNCHRONIZE_CACHE */	\
 
 #define US_FLAG(name, value)	US_FL_##name = value ,
 enum { US_DO_ALL_FLAGS };

[PATCH 4.14 25/43] USB: replace hardcode maximum usb string length by definition

[Greg Kroah-Hartman]

From: Macpaul Lin <macpaul.lin@mediatek.com>

commit 81c7462883b0cc0a4eeef0687f80ad5b5baee5f6 upstream.

Replace hardcoded maximum USB string length (126 bytes) by definition
"USB_MAX_STRING_LEN".

Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/1592471618-29428-1-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/composite.c |    4 ++--
 drivers/usb/gadget/configfs.c  |    2 +-
 drivers/usb/gadget/usbstring.c |    4 ++--
 include/uapi/linux/usb/ch9.h   |    3 +++
 4 files changed, 8 insertions(+), 5 deletions(-)

--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1080,7 +1080,7 @@ static void collect_langs(struct usb_gad
 	while (*sp) {
 		s = *sp;
 		language = cpu_to_le16(s->language);
-		for (tmp = buf; *tmp && tmp < &buf[126]; tmp++) {
+		for (tmp = buf; *tmp && tmp < &buf[USB_MAX_STRING_LEN]; tmp++) {
 			if (*tmp == language)
 				goto repeat;
 		}
@@ -1155,7 +1155,7 @@ static int get_string(struct usb_composi
 			collect_langs(sp, s->wData);
 		}
 
-		for (len = 0; len <= 126 && s->wData[len]; len++)
+		for (len = 0; len <= USB_MAX_STRING_LEN && s->wData[len]; len++)
 			continue;
 		if (!len)
 			return -EINVAL;
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -114,7 +114,7 @@ static int usb_string_copy(const char *s
 	char *str;
 	char *copy = *s_copy;
 	ret = strlen(s);
-	if (ret > 126)
+	if (ret > USB_MAX_STRING_LEN)
 		return -EOVERFLOW;
 
 	str = kstrdup(s, GFP_KERNEL);
--- a/drivers/usb/gadget/usbstring.c
+++ b/drivers/usb/gadget/usbstring.c
@@ -59,9 +59,9 @@ usb_gadget_get_string (struct usb_gadget
 		return -EINVAL;
 
 	/* string descriptors have length, tag, then UTF16-LE text */
-	len = min ((size_t) 126, strlen (s->s));
+	len = min((size_t)USB_MAX_STRING_LEN, strlen(s->s));
 	len = utf8s_to_utf16s(s->s, len, UTF16_LITTLE_ENDIAN,
-			(wchar_t *) &buf[2], 126);
+			(wchar_t *) &buf[2], USB_MAX_STRING_LEN);
 	if (len < 0)
 		return -EINVAL;
 	buf [0] = (len + 1) * 2;
--- a/include/uapi/linux/usb/ch9.h
+++ b/include/uapi/linux/usb/ch9.h
@@ -360,6 +360,9 @@ struct usb_config_descriptor {
 
 /*-------------------------------------------------------------------------*/
 
+/* USB String descriptors can contain at most 126 characters. */
+#define USB_MAX_STRING_LEN	126
+
 /* USB_DT_STRING: String descriptor */
 struct usb_string_descriptor {
 	__u8  bLength;

[PATCH 4.14 26/43] usb: gadget: configfs: Fix KASAN use-after-free

[Greg Kroah-Hartman]

From: Jim Lin <jilin@nvidia.com>

commit 98f153a10da403ddd5e9d98a3c8c2bb54bb5a0b6 upstream.

When gadget is disconnected, running sequence is like this.
. composite_disconnect
. Call trace:
  usb_string_copy+0xd0/0x128
  gadget_config_name_configuration_store+0x4
  gadget_config_name_attr_store+0x40/0x50
  configfs_write_file+0x198/0x1f4
  vfs_write+0x100/0x220
  SyS_write+0x58/0xa8
. configfs_composite_unbind
. configfs_composite_bind

In configfs_composite_bind, it has
"cn->strings.s = cn->configuration;"

When usb_string_copy is invoked. it would
allocate memory, copy input string, release previous pointed memory space,
and use new allocated memory.

When gadget is connected, host sends down request to get information.
Call trace:
  usb_gadget_get_string+0xec/0x168
  lookup_string+0x64/0x98
  composite_setup+0xa34/0x1ee8

If gadget is disconnected and connected quickly, in the failed case,
cn->configuration memory has been released by usb_string_copy kfree but
configfs_composite_bind hasn't been run in time to assign new allocated
"cn->configuration" pointer to "cn->strings.s".

When "strlen(s->s) of usb_gadget_get_string is being executed, the dangling
memory is accessed, "BUG: KASAN: use-after-free" error occurs.

Cc: stable@vger.kernel.org
Signed-off-by: Jim Lin <jilin@nvidia.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/1615444961-13376-1-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/configfs.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -108,6 +108,8 @@ struct gadget_config_name {
 	struct list_head list;
 };
 
+#define USB_MAX_STRING_WITH_NULL_LEN	(USB_MAX_STRING_LEN+1)
+
 static int usb_string_copy(const char *s, char **s_copy)
 {
 	int ret;
@@ -117,12 +119,16 @@ static int usb_string_copy(const char *s
 	if (ret > USB_MAX_STRING_LEN)
 		return -EOVERFLOW;
 
-	str = kstrdup(s, GFP_KERNEL);
-	if (!str)
-		return -ENOMEM;
+	if (copy) {
+		str = copy;
+	} else {
+		str = kmalloc(USB_MAX_STRING_WITH_NULL_LEN, GFP_KERNEL);
+		if (!str)
+			return -ENOMEM;
+	}
+	strcpy(str, s);
 	if (str[ret - 1] == '\n')
 		str[ret - 1] = '\0';
-	kfree(copy);
 	*s_copy = str;
 	return 0;
 }

[PATCH 4.14 27/43] iio:adc:stm32-adc: Add HAS_IOMEM dependency

[Greg Kroah-Hartman]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

commit 121875b28e3bd7519a675bf8ea2c2e793452c2bd upstream.

Seems that there are config combinations in which this driver gets enabled
and hence selects the MFD, but with out HAS_IOMEM getting pulled in
via some other route.  MFD is entirely contained in an
if HAS_IOMEM block, leading to the build issue in this bugzilla.

https://bugzilla.kernel.org/show_bug.cgi?id=209889

Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210124195034.22576-1-jic23@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/adc/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -635,6 +635,7 @@ config STM32_ADC_CORE
 	depends on HAS_DMA
 	depends on OF
 	depends on REGULATOR
+	depends on HAS_IOMEM
 	select IIO_BUFFER
 	select MFD_STM32_TIMERS
 	select IIO_STM32_TIMER_TRIGGER

[PATCH 4.14 28/43] iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel

[Greg Kroah-Hartman]

From: Jonathan Albrieux <jonathan.albrieux@gmail.com>

commit 7d200b283aa049fcda0d43dd6e03e9e783d2799c upstream.

Checking at both msm8909-pm8916.dtsi and msm8916.dtsi from downstream
it is indicated that "batt_id" channel has to be scaled with the default
function:

	chan@31 {
		label = "batt_id";
		reg = <0x31>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0xb>;
		qcom,fast-avg-setup = <0>;
	};

Change LR_MUX2_BAT_ID scaling accordingly.

Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: 7c271eea7b8a ("iio: adc: spmi-vadc: Changes to support different scaling")
Link: https://lore.kernel.org/r/20210113151808.4628-2-jonathan.albrieux@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/adc/qcom-spmi-vadc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/adc/qcom-spmi-vadc.c
+++ b/drivers/iio/adc/qcom-spmi-vadc.c
@@ -607,7 +607,7 @@ static const struct vadc_channels vadc_c
 	VADC_CHAN_NO_SCALE(P_MUX16_1_3, 1)
 
 	VADC_CHAN_NO_SCALE(LR_MUX1_BAT_THERM, 0)
-	VADC_CHAN_NO_SCALE(LR_MUX2_BAT_ID, 0)
+	VADC_CHAN_VOLT(LR_MUX2_BAT_ID, 0, SCALE_DEFAULT)
 	VADC_CHAN_NO_SCALE(LR_MUX3_XO_THERM, 0)
 	VADC_CHAN_NO_SCALE(LR_MUX4_AMUX_THM1, 0)
 	VADC_CHAN_NO_SCALE(LR_MUX5_AMUX_THM2, 0)

[PATCH 4.14 29/43] iio: adis16400: Fix an error code in adis16400_initial_setup()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit a71266e454b5df10d019b06f5ebacd579f76be28 upstream.

This is to silence a new Smatch warning:

    drivers/iio/imu/adis16400.c:492 adis16400_initial_setup()
    warn: sscanf doesn't return error codes

If the condition "if (st->variant->flags & ADIS16400_HAS_SLOW_MODE) {"
is false then we return 1 instead of returning 0 and probe will fail.

Fixes: 72a868b38bdd ("iio: imu: check sscanf return value")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YCwgFb3JVG6qrlQ+@mwanda
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/imu/adis16400_core.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/iio/imu/adis16400_core.c
+++ b/drivers/iio/imu/adis16400_core.c
@@ -288,8 +288,7 @@ static int adis16400_initial_setup(struc
 		if (ret)
 			goto err_ret;
 
-		ret = sscanf(indio_dev->name, "adis%u\n", &device_id);
-		if (ret != 1) {
+		if (sscanf(indio_dev->name, "adis%u\n", &device_id) != 1) {
 			ret = -EINVAL;
 			goto err_ret;
 		}

[PATCH 4.14 30/43] iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

commit 6dbbbe4cfd398704b72b21c1d4a5d3807e909d60 upstream.

There is one regmap_bulk_read() call in mpu3050_trigger_handler
that we have caught its return value bug lack further handling.
Check and terminate the execution flow just like the other three
regmap_bulk_read() calls in this function.

Fixes: 3904b28efb2c7 ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210301080421.13436-1-dinghao.liu@zju.edu.cn
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/gyro/mpu3050-core.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/iio/gyro/mpu3050-core.c
+++ b/drivers/iio/gyro/mpu3050-core.c
@@ -549,6 +549,8 @@ static irqreturn_t mpu3050_trigger_handl
 					       MPU3050_FIFO_R,
 					       &fifo_values[offset],
 					       toread);
+			if (ret)
+				goto out_trigger_unlock;
 
 			dev_dbg(mpu3050->dev,
 				"%04x %04x %04x %04x %04x\n",

[PATCH 4.14 31/43] iio: hid-sensor-humidity: Fix alignment issue of timestamp channel

[Greg Kroah-Hartman]

From: Ye Xiang <xiang.ye@intel.com>

commit 37e89e574dc238a4ebe439543c5ab4fbb2f0311b upstream.

This patch ensures that, there is sufficient space and correct
alignment for the timestamp.

Fixes: d7ed89d5aadf ("iio: hid: Add humidity sensor support")
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210303063615.12130-2-xiang.ye@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/humidity/hid-sensor-humidity.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/iio/humidity/hid-sensor-humidity.c
+++ b/drivers/iio/humidity/hid-sensor-humidity.c
@@ -28,7 +28,10 @@
 struct hid_humidity_state {
 	struct hid_sensor_common common_attributes;
 	struct hid_sensor_hub_attribute_info humidity_attr;
-	s32 humidity_data;
+	struct {
+		s32 humidity_data;
+		u64 timestamp __aligned(8);
+	} scan;
 	int scale_pre_decml;
 	int scale_post_decml;
 	int scale_precision;
@@ -139,9 +142,8 @@ static int humidity_proc_event(struct hi
 	struct hid_humidity_state *humid_st = iio_priv(indio_dev);
 
 	if (atomic_read(&humid_st->common_attributes.data_ready))
-		iio_push_to_buffers_with_timestamp(indio_dev,
-					&humid_st->humidity_data,
-					iio_get_time_ns(indio_dev));
+		iio_push_to_buffers_with_timestamp(indio_dev, &humid_st->scan,
+						   iio_get_time_ns(indio_dev));
 
 	return 0;
 }
@@ -156,7 +158,7 @@ static int humidity_capture_sample(struc
 
 	switch (usage_id) {
 	case HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY:
-		humid_st->humidity_data = *(s32 *)raw_data;
+		humid_st->scan.humidity_data = *(s32 *)raw_data;
 
 		return 0;
 	default:

[PATCH 4.14 32/43] iio: hid-sensor-prox: Fix scale not correct issue

[Greg Kroah-Hartman]

From: Ye Xiang <xiang.ye@intel.com>

commit d68c592e02f6f49a88e705f13dfc1883432cf300 upstream.

Currently, the proxy sensor scale is zero because it just return the
exponent directly. To fix this issue, this patch use
hid_sensor_format_scale to process the scale first then return the
output.

Fixes: 39a3a0138f61 ("iio: hid-sensors: Added Proximity Sensor Driver")
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Link: https://lore.kernel.org/r/20210130102530.31064-1-xiang.ye@intel.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/light/hid-sensor-prox.c |   13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

--- a/drivers/iio/light/hid-sensor-prox.c
+++ b/drivers/iio/light/hid-sensor-prox.c
@@ -37,6 +37,9 @@ struct prox_state {
 	struct hid_sensor_common common_attributes;
 	struct hid_sensor_hub_attribute_info prox_attr;
 	u32 human_presence;
+	int scale_pre_decml;
+	int scale_post_decml;
+	int scale_precision;
 };
 
 /* Channel definitions */
@@ -107,8 +110,9 @@ static int prox_read_raw(struct iio_dev
 		ret_type = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SCALE:
-		*val = prox_state->prox_attr.units;
-		ret_type = IIO_VAL_INT;
+		*val = prox_state->scale_pre_decml;
+		*val2 = prox_state->scale_post_decml;
+		ret_type = prox_state->scale_precision;
 		break;
 	case IIO_CHAN_INFO_OFFSET:
 		*val = hid_sensor_convert_exponent(
@@ -249,6 +253,11 @@ static int prox_parse_report(struct plat
 			HID_USAGE_SENSOR_HUMAN_PRESENCE,
 			&st->common_attributes.sensitivity);
 
+	st->scale_precision = hid_sensor_format_scale(
+				hsdev->usage,
+				&st->prox_attr,
+				&st->scale_pre_decml, &st->scale_post_decml);
+
 	return ret;
 }
 

[PATCH 4.14 33/43] iio: hid-sensor-temperature: Fix issues of timestamp channel

[Greg Kroah-Hartman]

From: Ye Xiang <xiang.ye@intel.com>

commit 141e7633aa4d2838d1f6ad5c74cccc53547c16ac upstream.

This patch fixes 2 issues of timestamp channel:
1. This patch ensures that there is sufficient space and correct
alignment for the timestamp.
2. Correct the timestamp channel scan index.

Fixes: 59d0f2da3569 ("iio: hid: Add temperature sensor support")
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210303063615.12130-4-xiang.ye@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/temperature/hid-sensor-temperature.c |   14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

--- a/drivers/iio/temperature/hid-sensor-temperature.c
+++ b/drivers/iio/temperature/hid-sensor-temperature.c
@@ -28,7 +28,10 @@
 struct temperature_state {
 	struct hid_sensor_common common_attributes;
 	struct hid_sensor_hub_attribute_info temperature_attr;
-	s32 temperature_data;
+	struct {
+		s32 temperature_data;
+		u64 timestamp __aligned(8);
+	} scan;
 	int scale_pre_decml;
 	int scale_post_decml;
 	int scale_precision;
@@ -45,7 +48,7 @@ static const struct iio_chan_spec temper
 			BIT(IIO_CHAN_INFO_SAMP_FREQ) |
 			BIT(IIO_CHAN_INFO_HYSTERESIS),
 	},
-	IIO_CHAN_SOFT_TIMESTAMP(3),
+	IIO_CHAN_SOFT_TIMESTAMP(1),
 };
 
 /* Adjust channel real bits based on report descriptor */
@@ -137,9 +140,8 @@ static int temperature_proc_event(struct
 	struct temperature_state *temp_st = iio_priv(indio_dev);
 
 	if (atomic_read(&temp_st->common_attributes.data_ready))
-		iio_push_to_buffers_with_timestamp(indio_dev,
-				&temp_st->temperature_data,
-				iio_get_time_ns(indio_dev));
+		iio_push_to_buffers_with_timestamp(indio_dev, &temp_st->scan,
+						   iio_get_time_ns(indio_dev));
 
 	return 0;
 }
@@ -154,7 +156,7 @@ static int temperature_capture_sample(st
 
 	switch (usage_id) {
 	case HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERATURE:
-		temp_st->temperature_data = *(s32 *)raw_data;
+		temp_st->scan.temperature_data = *(s32 *)raw_data;
 		return 0;
 	default:
 		return -EINVAL;

[PATCH 4.14 34/43] PCI: rpadlpar: Fix potential drc_name corruption in store functions

[Greg Kroah-Hartman]

From: Tyrel Datwyler <tyreld@linux.ibm.com>

commit cc7a0bb058b85ea03db87169c60c7cfdd5d34678 upstream.

Both add_slot_store() and remove_slot_store() try to fix up the
drc_name copied from the store buffer by placing a NUL terminator at
nbyte + 1 or in place of a '\n' if present. However, the static buffer
that we copy the drc_name data into is not zeroed and can contain
anything past the n-th byte.

This is problematic if a '\n' byte appears in that buffer after nbytes
and the string copied into the store buffer was not NUL terminated to
start with as the strchr() search for a '\n' byte will mark this
incorrectly as the end of the drc_name string resulting in a drc_name
string that contains garbage data after the n-th byte.

Additionally it will cause us to overwrite that '\n' byte on the stack
with NUL, potentially corrupting data on the stack.

The following debugging shows an example of the drmgr utility writing
"PHB 4543" to the add_slot sysfs attribute, but add_slot_store()
logging a corrupted string value.

  drmgr: drmgr: -c phb -a -s PHB 4543 -d 1
  add_slot_store: drc_name = PHB 4543°|<82>!, rc = -19

Fix this by using strscpy() instead of memcpy() to ensure the string
is NUL terminated when copied into the static drc_name buffer.
Further, since the string is now NUL terminated the code only needs to
change '\n' to '\0' when present.

Cc: stable@vger.kernel.org
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
[mpe: Reformat change log and add mention of possible stack corruption]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210315214821.452959-1-tyreld@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/hotplug/rpadlpar_sysfs.c |   14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

--- a/drivers/pci/hotplug/rpadlpar_sysfs.c
+++ b/drivers/pci/hotplug/rpadlpar_sysfs.c
@@ -39,12 +39,11 @@ static ssize_t add_slot_store(struct kob
 	if (nbytes >= MAX_DRC_NAME_LEN)
 		return 0;
 
-	memcpy(drc_name, buf, nbytes);
+	strscpy(drc_name, buf, nbytes + 1);
 
 	end = strchr(drc_name, '\n');
-	if (!end)
-		end = &drc_name[nbytes];
-	*end = '\0';
+	if (end)
+		*end = '\0';
 
 	rc = dlpar_add_slot(drc_name);
 	if (rc)
@@ -70,12 +69,11 @@ static ssize_t remove_slot_store(struct
 	if (nbytes >= MAX_DRC_NAME_LEN)
 		return 0;
 
-	memcpy(drc_name, buf, nbytes);
+	strscpy(drc_name, buf, nbytes + 1);
 
 	end = strchr(drc_name, '\n');
-	if (!end)
-		end = &drc_name[nbytes];
-	*end = '\0';
+	if (end)
+		*end = '\0';
 
 	rc = dlpar_remove_slot(drc_name);
 	if (rc)

[PATCH 4.14 35/43] perf/x86/intel: Fix a crash caused by zero PEBS status

[Greg Kroah-Hartman]

From: Kan Liang <kan.liang@linux.intel.com>

commit d88d05a9e0b6d9356e97129d4ff9942d765f46ea upstream.

A repeatable crash can be triggered by the perf_fuzzer on some Haswell
system.
https://lore.kernel.org/lkml/7170d3b-c17f-1ded-52aa-cc6d9ae999f4@maine.edu/

For some old CPUs (HSW and earlier), the PEBS status in a PEBS record
may be mistakenly set to 0. To minimize the impact of the defect, the
commit was introduced to try to avoid dropping the PEBS record for some
cases. It adds a check in the intel_pmu_drain_pebs_nhm(), and updates
the local pebs_status accordingly. However, it doesn't correct the PEBS
status in the PEBS record, which may trigger the crash, especially for
the large PEBS.

It's possible that all the PEBS records in a large PEBS have the PEBS
status 0. If so, the first get_next_pebs_record_by_bit() in the
__intel_pmu_pebs_event() returns NULL. The at = NULL. Since it's a large
PEBS, the 'count' parameter must > 1. The second
get_next_pebs_record_by_bit() will crash.

Besides the local pebs_status, correct the PEBS status in the PEBS
record as well.

Fixes: 01330d7288e0 ("perf/x86: Allow zero PEBS status with only single active event")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1615555298-140216-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/events/intel/ds.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/events/intel/ds.c
+++ b/arch/x86/events/intel/ds.c
@@ -1515,7 +1515,7 @@ static void intel_pmu_drain_pebs_nhm(str
 		 */
 		if (!pebs_status && cpuc->pebs_enabled &&
 			!(cpuc->pebs_enabled & (cpuc->pebs_enabled-1)))
-			pebs_status = cpuc->pebs_enabled;
+			pebs_status = p->status = cpuc->pebs_enabled;
 
 		bit = find_first_bit((unsigned long *)&pebs_status,
 					x86_pmu.max_pebs_events);

[PATCH 4.14 36/43] x86/ioapic: Ignore IRQ2 again

[Greg Kroah-Hartman]

From: Thomas Gleixner <tglx@linutronix.de>

commit a501b048a95b79e1e34f03cac3c87ff1e9f229ad upstream.

Vitaly ran into an issue with hotplugging CPU0 on an Amazon instance where
the matrix allocator claimed to be out of vectors. He analyzed it down to
the point that IRQ2, the PIC cascade interrupt, which is supposed to be not
ever routed to the IO/APIC ended up having an interrupt vector assigned
which got moved during unplug of CPU0.

The underlying issue is that IRQ2 for various reasons (see commit
af174783b925 ("x86: I/O APIC: Never configure IRQ2" for details) is treated
as a reserved system vector by the vector core code and is not accounted as
a regular vector. The Amazon BIOS has an routing entry of pin2 to IRQ2
which causes the IO/APIC setup to claim that interrupt which is granted by
the vector domain because there is no sanity check. As a consequence the
allocation counter of CPU0 underflows which causes a subsequent unplug to
fail with:

  [ ... ] CPU 0 has 4294967295 vectors, 589 available. Cannot disable CPU

There is another sanity check missing in the matrix allocator, but the
underlying root cause is that the IO/APIC code lost the IRQ2 ignore logic
during the conversion to irqdomains.

For almost 6 years nobody complained about this wreckage, which might
indicate that this requirement could be lifted, but for any system which
actually has a PIC IRQ2 is unusable by design so any routing entry has no
effect and the interrupt cannot be connected to a device anyway.

Due to that and due to history biased paranoia reasons restore the IRQ2
ignore logic and treat it as non existent despite a routing entry claiming
otherwise.

Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces")
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210318192819.636943062@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/apic/io_apic.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1042,6 +1042,16 @@ static int mp_map_pin_to_irq(u32 gsi, in
 	if (idx >= 0 && test_bit(mp_irqs[idx].srcbus, mp_bus_not_pci)) {
 		irq = mp_irqs[idx].srcbusirq;
 		legacy = mp_is_legacy_irq(irq);
+		/*
+		 * IRQ2 is unusable for historical reasons on systems which
+		 * have a legacy PIC. See the comment vs. IRQ2 further down.
+		 *
+		 * If this gets removed at some point then the related code
+		 * in lapic_assign_system_vectors() needs to be adjusted as
+		 * well.
+		 */
+		if (legacy && irq == PIC_CASCADE_IR)
+			return -EINVAL;
 	}
 
 	mutex_lock(&ioapic_mutex);

[PATCH 4.14 37/43] kernel, fs: Introduce and use set_restart_fn() and arch_set_restart_data()

[Greg Kroah-Hartman]

From: Oleg Nesterov <oleg@redhat.com>

commit 5abbe51a526253b9f003e9a0a195638dc882d660 upstream.

Preparation for fixing get_nr_restart_syscall() on X86 for COMPAT.

Add a new helper which sets restart_block->fn and calls a dummy
arch_set_restart_data() helper.

Fixes: 609c19a385c8 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210201174641.GA17871@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/select.c                    |   10 ++++------
 include/linux/thread_info.h    |   13 +++++++++++++
 kernel/futex.c                 |    3 +--
 kernel/time/alarmtimer.c       |    2 +-
 kernel/time/hrtimer.c          |    2 +-
 kernel/time/posix-cpu-timers.c |    2 +-
 6 files changed, 21 insertions(+), 11 deletions(-)

--- a/fs/select.c
+++ b/fs/select.c
@@ -1006,10 +1006,9 @@ static long do_restart_poll(struct resta
 
 	ret = do_sys_poll(ufds, nfds, to);
 
-	if (ret == -EINTR) {
-		restart_block->fn = do_restart_poll;
-		ret = -ERESTART_RESTARTBLOCK;
-	}
+	if (ret == -EINTR)
+		ret = set_restart_fn(restart_block, do_restart_poll);
+
 	return ret;
 }
 
@@ -1031,7 +1030,6 @@ SYSCALL_DEFINE3(poll, struct pollfd __us
 		struct restart_block *restart_block;
 
 		restart_block = &current->restart_block;
-		restart_block->fn = do_restart_poll;
 		restart_block->poll.ufds = ufds;
 		restart_block->poll.nfds = nfds;
 
@@ -1042,7 +1040,7 @@ SYSCALL_DEFINE3(poll, struct pollfd __us
 		} else
 			restart_block->poll.has_timeout = 0;
 
-		ret = -ERESTART_RESTARTBLOCK;
+		ret = set_restart_fn(restart_block, do_restart_poll);
 	}
 	return ret;
 }
--- a/include/linux/thread_info.h
+++ b/include/linux/thread_info.h
@@ -11,6 +11,7 @@
 #include <linux/types.h>
 #include <linux/bug.h>
 #include <linux/restart_block.h>
+#include <linux/errno.h>
 
 #ifdef CONFIG_THREAD_INFO_IN_TASK
 /*
@@ -39,6 +40,18 @@ enum {
 
 #ifdef __KERNEL__
 
+#ifndef arch_set_restart_data
+#define arch_set_restart_data(restart) do { } while (0)
+#endif
+
+static inline long set_restart_fn(struct restart_block *restart,
+					long (*fn)(struct restart_block *))
+{
+	restart->fn = fn;
+	arch_set_restart_data(restart);
+	return -ERESTART_RESTARTBLOCK;
+}
+
 #ifndef THREAD_ALIGN
 #define THREAD_ALIGN	THREAD_SIZE
 #endif
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -2875,14 +2875,13 @@ retry:
 		goto out;
 
 	restart = &current->restart_block;
-	restart->fn = futex_wait_restart;
 	restart->futex.uaddr = uaddr;
 	restart->futex.val = val;
 	restart->futex.time = *abs_time;
 	restart->futex.bitset = bitset;
 	restart->futex.flags = flags | FLAGS_HAS_TIMEOUT;
 
-	ret = -ERESTART_RESTARTBLOCK;
+	ret = set_restart_fn(restart, futex_wait_restart);
 
 out:
 	if (to) {
--- a/kernel/time/alarmtimer.c
+++ b/kernel/time/alarmtimer.c
@@ -822,9 +822,9 @@ static int alarm_timer_nsleep(const cloc
 	if (flags == TIMER_ABSTIME)
 		return -ERESTARTNOHAND;
 
-	restart->fn = alarm_timer_nsleep_restart;
 	restart->nanosleep.clockid = type;
 	restart->nanosleep.expires = exp;
+	set_restart_fn(restart, alarm_timer_nsleep_restart);
 	return ret;
 }
 
--- a/kernel/time/hrtimer.c
+++ b/kernel/time/hrtimer.c
@@ -1545,9 +1545,9 @@ long hrtimer_nanosleep(const struct time
 	}
 
 	restart = &current->restart_block;
-	restart->fn = hrtimer_nanosleep_restart;
 	restart->nanosleep.clockid = t.timer.base->clockid;
 	restart->nanosleep.expires = hrtimer_get_expires_tv64(&t.timer);
+	set_restart_fn(restart, hrtimer_nanosleep_restart);
 out:
 	destroy_hrtimer_on_stack(&t.timer);
 	return ret;
--- a/kernel/time/posix-cpu-timers.c
+++ b/kernel/time/posix-cpu-timers.c
@@ -1348,8 +1348,8 @@ static int posix_cpu_nsleep(const clocki
 		if (flags & TIMER_ABSTIME)
 			return -ERESTARTNOHAND;
 
-		restart_block->fn = posix_cpu_nsleep_restart;
 		restart_block->nanosleep.clockid = which_clock;
+		set_restart_fn(restart_block, posix_cpu_nsleep_restart);
 	}
 	return error;
 }

[PATCH 4.14 38/43] x86: Move TS_COMPAT back to asm/thread_info.h

[Greg Kroah-Hartman]

From: Oleg Nesterov <oleg@redhat.com>

commit 66c1b6d74cd7035e85c426f0af4aede19e805c8a upstream.

Move TS_COMPAT back to asm/thread_info.h, close to TS_I386_REGS_POKED.

It was moved to asm/processor.h by b9d989c7218a ("x86/asm: Move the
thread_info::status field to thread_struct"), then later 37a8f7c38339
("x86/asm: Move 'status' from thread_struct to thread_info") moved the
'status' field back but TS_COMPAT was forgotten.

Preparatory patch to fix the COMPAT case for get_nr_restart_syscall()

Fixes: 609c19a385c8 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210201174649.GA17880@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/include/asm/processor.h   |    9 ---------
 arch/x86/include/asm/thread_info.h |    9 +++++++++
 2 files changed, 9 insertions(+), 9 deletions(-)

--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -512,15 +512,6 @@ struct thread_struct {
 };
 
 /*
- * Thread-synchronous status.
- *
- * This is different from the flags in that nobody else
- * ever touches our thread-synchronous status, so we don't
- * have to worry about atomic accesses.
- */
-#define TS_COMPAT		0x0002	/* 32bit syscall active (64BIT)*/
-
-/*
  * Set IOPL bits in EFLAGS from given mask
  */
 static inline void native_set_iopl_mask(unsigned mask)
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -229,6 +229,15 @@ static inline int arch_within_stack_fram
 
 #endif
 
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+#define TS_COMPAT		0x0002	/* 32bit syscall active (64BIT)*/
+
 #ifdef CONFIG_COMPAT
 #define TS_I386_REGS_POKED	0x0004	/* regs poked by 32-bit ptracer */
 #endif

[PATCH 4.14 39/43] x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall()

[Greg Kroah-Hartman]

From: Oleg Nesterov <oleg@redhat.com>

commit 8c150ba2fb5995c84a7a43848250d444a3329a7d upstream.

The comment in get_nr_restart_syscall() says:

	 * The problem is that we can get here when ptrace pokes
	 * syscall-like values into regs even if we're not in a syscall
	 * at all.

Yes, but if not in a syscall then the

	status & (TS_COMPAT|TS_I386_REGS_POKED)

check below can't really help:

	- TS_COMPAT can't be set

	- TS_I386_REGS_POKED is only set if regs->orig_ax was changed by
	  32bit debugger; and even in this case get_nr_restart_syscall()
	  is only correct if the tracee is 32bit too.

Suppose that a 64bit debugger plays with a 32bit tracee and

	* Tracee calls sleep(2)	// TS_COMPAT is set
	* User interrupts the tracee by CTRL-C after 1 sec and does
	  "(gdb) call func()"
	* gdb saves the regs by PTRACE_GETREGS
	* does PTRACE_SETREGS to set %rip='func' and %orig_rax=-1
	* PTRACE_CONT		// TS_COMPAT is cleared
	* func() hits int3.
	* Debugger catches SIGTRAP.
	* Restore original regs by PTRACE_SETREGS.
	* PTRACE_CONT

get_nr_restart_syscall() wrongly returns __NR_restart_syscall==219, the
tracee calls ia32_sys_call_table[219] == sys_madvise.

Add the sticky TS_COMPAT_RESTART flag which survives after return to user
mode. It's going to be removed in the next step again by storing the
information in the restart block. As a further cleanup it might be possible
to remove also TS_I386_REGS_POKED with that.

Test-case:

  $ cvs -d :pserver:anoncvs:anoncvs@sourceware.org:/cvs/systemtap co ptrace-tests
  $ gcc -o erestartsys-trap-debuggee ptrace-tests/tests/erestartsys-trap-debuggee.c --m32
  $ gcc -o erestartsys-trap-debugger ptrace-tests/tests/erestartsys-trap-debugger.c -lutil
  $ ./erestartsys-trap-debugger
  Unexpected: retval 1, errno 22
  erestartsys-trap-debugger: ptrace-tests/tests/erestartsys-trap-debugger.c:421

Fixes: 609c19a385c8 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code")
Reported-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210201174709.GA17895@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/include/asm/thread_info.h |   14 +++++++++++++-
 arch/x86/kernel/signal.c           |   24 +-----------------------
 2 files changed, 14 insertions(+), 24 deletions(-)

--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -238,10 +238,22 @@ static inline int arch_within_stack_fram
  */
 #define TS_COMPAT		0x0002	/* 32bit syscall active (64BIT)*/
 
+#ifndef __ASSEMBLY__
 #ifdef CONFIG_COMPAT
 #define TS_I386_REGS_POKED	0x0004	/* regs poked by 32-bit ptracer */
+#define TS_COMPAT_RESTART	0x0008
+
+#define arch_set_restart_data	arch_set_restart_data
+
+static inline void arch_set_restart_data(struct restart_block *restart)
+{
+	struct thread_info *ti = current_thread_info();
+	if (ti->status & TS_COMPAT)
+		ti->status |= TS_COMPAT_RESTART;
+	else
+		ti->status &= ~TS_COMPAT_RESTART;
+}
 #endif
-#ifndef __ASSEMBLY__
 
 #ifdef CONFIG_X86_32
 #define in_ia32_syscall() true
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -769,30 +769,8 @@ handle_signal(struct ksignal *ksig, stru
 
 static inline unsigned long get_nr_restart_syscall(const struct pt_regs *regs)
 {
-	/*
-	 * This function is fundamentally broken as currently
-	 * implemented.
-	 *
-	 * The idea is that we want to trigger a call to the
-	 * restart_block() syscall and that we want in_ia32_syscall(),
-	 * in_x32_syscall(), etc. to match whatever they were in the
-	 * syscall being restarted.  We assume that the syscall
-	 * instruction at (regs->ip - 2) matches whatever syscall
-	 * instruction we used to enter in the first place.
-	 *
-	 * The problem is that we can get here when ptrace pokes
-	 * syscall-like values into regs even if we're not in a syscall
-	 * at all.
-	 *
-	 * For now, we maintain historical behavior and guess based on
-	 * stored state.  We could do better by saving the actual
-	 * syscall arch in restart_block or (with caveats on x32) by
-	 * checking if regs->ip points to 'int $0x80'.  The current
-	 * behavior is incorrect if a tracer has a different bitness
-	 * than the tracee.
-	 */
 #ifdef CONFIG_IA32_EMULATION
-	if (current_thread_info()->status & (TS_COMPAT|TS_I386_REGS_POKED))
+	if (current_thread_info()->status & TS_COMPAT_RESTART)
 		return __NR_ia32_restart_syscall;
 #endif
 #ifdef CONFIG_X86_X32_ABI

[PATCH 4.14 40/43] ext4: find old entry again if failed to rename whiteout

[Greg Kroah-Hartman]

From: zhangyi (F) <yi.zhang@huawei.com>

commit b7ff91fd030dc9d72ed91b1aab36e445a003af4f upstream.

If we failed to add new entry on rename whiteout, we cannot reset the
old->de entry directly, because the old->de could have moved from under
us during make indexed dir. So find the old entry again before reset is
needed, otherwise it may corrupt the filesystem as below.

  /dev/sda: Entry '00000001' in ??? (12) has deleted/unused inode 15. CLEARED.
  /dev/sda: Unattached inode 75
  /dev/sda: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.

Fixes: 6b4b8e6b4ad ("ext4: fix bug for rename with RENAME_WHITEOUT")
Cc: stable@vger.kernel.org
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210303131703.330415-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/namei.c |   29 +++++++++++++++++++++++++++--
 1 file changed, 27 insertions(+), 2 deletions(-)

--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -3445,6 +3445,31 @@ static int ext4_setent(handle_t *handle,
 	return 0;
 }
 
+static void ext4_resetent(handle_t *handle, struct ext4_renament *ent,
+			  unsigned ino, unsigned file_type)
+{
+	struct ext4_renament old = *ent;
+	int retval = 0;
+
+	/*
+	 * old->de could have moved from under us during make indexed dir,
+	 * so the old->de may no longer valid and need to find it again
+	 * before reset old inode info.
+	 */
+	old.bh = ext4_find_entry(old.dir, &old.dentry->d_name, &old.de, NULL);
+	if (IS_ERR(old.bh))
+		retval = PTR_ERR(old.bh);
+	if (!old.bh)
+		retval = -ENOENT;
+	if (retval) {
+		ext4_std_error(old.dir->i_sb, retval);
+		return;
+	}
+
+	ext4_setent(handle, &old, ino, file_type);
+	brelse(old.bh);
+}
+
 static int ext4_find_delete_entry(handle_t *handle, struct inode *dir,
 				  const struct qstr *d_name)
 {
@@ -3754,8 +3779,8 @@ static int ext4_rename(struct inode *old
 end_rename:
 	if (whiteout) {
 		if (retval) {
-			ext4_setent(handle, &old,
-				old.inode->i_ino, old_file_type);
+			ext4_resetent(handle, &old,
+				      old.inode->i_ino, old_file_type);
 			drop_nlink(whiteout);
 		}
 		unlock_new_inode(whiteout);

[PATCH 4.14 41/43] ext4: do not try to set xattr into ea_inode if value is empty

[Greg Kroah-Hartman]

From: zhangyi (F) <yi.zhang@huawei.com>

commit 6b22489911b726eebbf169caee52fea52013fbdd upstream.

Syzbot report a warning that ext4 may create an empty ea_inode if set
an empty extent attribute to a file on the file system which is no free
blocks left.

  WARNING: CPU: 6 PID: 10667 at fs/ext4/xattr.c:1640 ext4_xattr_set_entry+0x10f8/0x1114 fs/ext4/xattr.c:1640
  ...
  Call trace:
   ext4_xattr_set_entry+0x10f8/0x1114 fs/ext4/xattr.c:1640
   ext4_xattr_block_set+0x1d0/0x1b1c fs/ext4/xattr.c:1942
   ext4_xattr_set_handle+0x8a0/0xf1c fs/ext4/xattr.c:2390
   ext4_xattr_set+0x120/0x1f0 fs/ext4/xattr.c:2491
   ext4_xattr_trusted_set+0x48/0x5c fs/ext4/xattr_trusted.c:37
   __vfs_setxattr+0x208/0x23c fs/xattr.c:177
  ...

Now, ext4 try to store extent attribute into an external inode if
ext4_xattr_block_set() return -ENOSPC, but for the case of store an
empty extent attribute, store the extent entry into the extent
attribute block is enough. A simple reproduce below.

  fallocate test.img -l 1M
  mkfs.ext4 -F -b 2048 -O ea_inode test.img
  mount test.img /mnt
  dd if=/dev/zero of=/mnt/foo bs=2048 count=500
  setfattr -n "user.test" /mnt/foo

Reported-by: syzbot+98b881fdd8ebf45ab4ae@syzkaller.appspotmail.com
Fixes: 9c6e7853c531 ("ext4: reserve space for xattr entries/names")
Cc: stable@kernel.org
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210305120508.298465-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/xattr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -2418,7 +2418,7 @@ retry_inode:
 				 * external inode if possible.
 				 */
 				if (ext4_has_feature_ea_inode(inode->i_sb) &&
-				    !i.in_inode) {
+				    i.value_len && !i.in_inode) {
 					i.in_inode = 1;
 					goto retry_inode;
 				}

[PATCH 4.14 42/43] ext4: fix potential error in ext4_do_update_inode

[Greg Kroah-Hartman]

From: Shijie Luo <luoshijie1@huawei.com>

commit 7d8bd3c76da1d94b85e6c9b7007e20e980bfcfe6 upstream.

If set_large_file = 1 and errors occur in ext4_handle_dirty_metadata(),
the error code will be overridden, go to out_brelse to avoid this
situation.

Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Link: https://lore.kernel.org/r/20210312065051.36314-1-luoshijie1@huawei.com
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/inode.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -5130,7 +5130,7 @@ static int ext4_do_update_inode(handle_t
 	struct ext4_inode_info *ei = EXT4_I(inode);
 	struct buffer_head *bh = iloc->bh;
 	struct super_block *sb = inode->i_sb;
-	int err = 0, rc, block;
+	int err = 0, block;
 	int need_datasync = 0, set_large_file = 0;
 	uid_t i_uid;
 	gid_t i_gid;
@@ -5240,9 +5240,9 @@ static int ext4_do_update_inode(handle_t
 					      bh->b_data);
 
 	BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata");
-	rc = ext4_handle_dirty_metadata(handle, NULL, bh);
-	if (!err)
-		err = rc;
+	err = ext4_handle_dirty_metadata(handle, NULL, bh);
+	if (err)
+		goto out_brelse;
 	ext4_clear_inode_state(inode, EXT4_STATE_NEW);
 	if (set_large_file) {
 		BUFFER_TRACE(EXT4_SB(sb)->s_sbh, "get write access");

[PATCH 4.14 43/43] genirq: Disable interrupts for force threaded handlers

[Greg Kroah-Hartman]

From: Thomas Gleixner <tglx@linutronix.de>

commit 81e2073c175b887398e5bca6c004efa89983f58d upstream.

With interrupt force threading all device interrupt handlers are invoked
from kernel threads. Contrary to hard interrupt context the invocation only
disables bottom halfs, but not interrupts. This was an oversight back then
because any code like this will have an issue:

thread(irq_A)
  irq_handler(A)
    spin_lock(&foo->lock);

interrupt(irq_B)
  irq_handler(B)
    spin_lock(&foo->lock);

This has been triggered with networking (NAPI vs. hrtimers) and console
drivers where printk() happens from an interrupt which interrupted the
force threaded handler.

Now people noticed and started to change the spin_lock() in the handler to
spin_lock_irqsave() which affects performance or add IRQF_NOTHREAD to the
interrupt request which in turn breaks RT.

Fix the root cause and not the symptom and disable interrupts before
invoking the force threaded handler which preserves the regular semantics
and the usefulness of the interrupt force threading as a general debugging
tool.

For not RT this is not changing much, except that during the execution of
the threaded handler interrupts are delayed until the handler
returns. Vs. scheduling and softirq processing there is no difference.

For RT kernels there is no issue.

Fixes: 8d32a307e4fa ("genirq: Provide forced interrupt threading")
Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Johan Hovold <johan@kernel.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20210317143859.513307808@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/irq/manage.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -916,11 +916,15 @@ irq_forced_thread_fn(struct irq_desc *de
 	irqreturn_t ret;
 
 	local_bh_disable();
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT_BASE))
+		local_irq_disable();
 	ret = action->thread_fn(action->irq, action->dev_id);
 	if (ret == IRQ_HANDLED)
 		atomic_inc(&desc->threads_handled);
 
 	irq_finalize_oneshot(desc, action);
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT_BASE))
+		local_irq_enable();
 	local_bh_enable();
 	return ret;
 }

Re: [PATCH 4.14 00/43] 4.14.227-rc1 review

[Jon Hunter]

On Mon, 22 Mar 2021 13:28:41 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.227 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 24 Mar 2021 12:19:09 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.227-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.14:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    34 tests:	34 pass, 0 fail

Linux version:	4.14.227-rc1-gdbfdb55a0970
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 4.14 00/43] 4.14.227-rc1 review

[Guenter Roeck]

On Mon, Mar 22, 2021 at 01:28:41PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.227 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 24 Mar 2021 12:19:09 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 168 pass: 168 fail: 0
Qemu test results:
	total: 406 pass: 406 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.14 00/43] 4.14.227-rc1 review

[Naresh Kamboju]

On Mon, 22 Mar 2021 at 18:29, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.14.227 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 24 Mar 2021 12:19:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.227-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

Summary
------------------------------------------------------------------------

kernel: 4.14.227-rc1
git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: dbfdb55a0970570a02a8d7bb6abc2e4db71218c8
git describe: v4.14.226-44-gdbfdb55a0970
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.226-44-gdbfdb55a0970

No regressions (compared to v4.14.226-8-g085047cda613)

No fixes (compared to v4.14.226-8-g085047cda613)

Ran 48680 total tests in the following environments and test suites.

Environments
--------------
- arm
- arm64
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- mips
- nxp-ls2088
- nxp-ls2088-64k_page_size
- powerpc
- qemu-arm-debug
- qemu-arm64-clang
- qemu-arm64-debug
- qemu-arm64-kasan
- qemu-i386-debug
- qemu-x86_64-clang
- qemu-x86_64-debug
- qemu-x86_64-kasan
- qemu_arm
- qemu_arm64
- qemu_arm64-compat
- qemu_i386
- qemu_x86_64
- qemu_x86_64-compat
- s390
- sparc
- x15 - arm
- x86_64
- x86-kasan
- x86_64

Test Suites
-----------
* build
* linux-log-parser
* install-android-platform-tools-r2600
* kselftest-
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-intel_pstate
* kselftest-kvm
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-zram
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-tracing-tests
* v4l2-compliance
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-lib
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kvm-unit-tests
* ltp-fs-tests
* network-basic-tests
* perf
* kselftest-kexec
* kselftest-vm
* kselftest-x86
* ltp-open-posix-tests
* ltp-syscalls-tests
* fwts
* rcutorture
* igt-gpu-tools
* ssuite
* kselftest-vsyscall-mode-native-
* kselftest-vsyscall-mode-none-

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.14 00/43] 4.14.227-rc1 review

[Samuel Zou]

On 2021/3/22 20:28, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.227 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 24 Mar 2021 12:19:09 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.227-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on x86 for 4.14.227-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.14.y
Version: 4.14.227-rc1
Commit: dbfdb55a0970570a02a8d7bb6abc2e4db71218c8
Compiler: gcc version 7.3.0 (GCC)


x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 4667
passed: 4667
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>