All of lore.kernel.org
 help / color / mirror / Atom feed
From: Robert Marko <robert.marko@sartura.hr>
To: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Linus Walleij <linus.walleij@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	linux-gpio <linux-gpio@vger.kernel.org>,
	linux-devicetree <devicetree@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>,
	Luka Perkov <luka.perkov@sartura.hr>
Subject: Re: [PATCH 1/2] gpio: tn48m: Add support for Delta TN4810M CPLD
Date: Tue, 3 Aug 2021 21:24:04 +0200	[thread overview]
Message-ID: <CA+HBbNGZ7=bfVQ0k6Yz6ywomBpf7upG7gOxN8dJEd6ErdWzaMA@mail.gmail.com> (raw)
In-Reply-To: <CAMpxmJVJzaRRe5XyyZM6qOzpi2t36hSbsTec=M3EUk9w17W4qQ@mail.gmail.com>

On Mon, Aug 2, 2021 at 2:12 PM Bartosz Golaszewski
<bgolaszewski@baylibre.com> wrote:
>
> On Mon, Aug 2, 2021 at 2:10 PM Bartosz Golaszewski
> <bgolaszewski@baylibre.com> wrote:
> >
> > On Sat, Jul 17, 2021 at 12:17 AM Robert Marko <robert.marko@sartura.hr> wrote:
> > >
> > > Delta TN4810M uses a similar CPLD GPIO expander
> > > like the TN48M, but it has pins for 48 SFP+ ports,
> > > making a total of 192 pins.
> > > It also provides the TX fault pins which the TN48M
> > > does not.
> > >
> > > Only TX disable pins like on the TN48M are output
> > > ones.
> > >
> > > Thankfully, regmap GPIO allows for the driver to be
> > > easily extended to support the TN4810M.
> > >
> > > Note that this patch depends on the following series:
> > > https://patchwork.ozlabs.org/project/linux-gpio/list/?series=247538
> > >
> > > Signed-off-by: Robert Marko <robert.marko@sartura.hr>
> > > ---
> > >  drivers/gpio/gpio-tn48m.c | 56 ++++++++++++++++++++++++++++++++++++---
> > >  1 file changed, 52 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/gpio/gpio-tn48m.c b/drivers/gpio/gpio-tn48m.c
> > > index b12a6b4bc4b3..e429e7ade941 100644
> > > --- a/drivers/gpio/gpio-tn48m.c
> > > +++ b/drivers/gpio/gpio-tn48m.c
> > > @@ -19,6 +19,10 @@ enum tn48m_gpio_type {
> > >         TN48M_SFP_TX_DISABLE = 1,
> > >         TN48M_SFP_PRESENT,
> > >         TN48M_SFP_LOS,
> > > +       TN4810M_SFP_TX_DISABLE,
> > > +       TN4810M_SFP_TX_FAULT,
> > > +       TN4810M_SFP_PRESENT,
> > > +       TN4810M_SFP_LOS,
> > >  };
> > >
> > >  static int tn48m_gpio_probe(struct platform_device *pdev)
> > > @@ -46,17 +50,36 @@ static int tn48m_gpio_probe(struct platform_device *pdev)
> > >
> > >         config.regmap = regmap;
> > >         config.parent = &pdev->dev;
> > > -       config.ngpio = 4;
> > > +       config.ngpio_per_reg = 8;
> > >
> > >         switch (type) {
> > >         case TN48M_SFP_TX_DISABLE:
> > >                 config.reg_set_base = base;
> > > +               config.ngpio = 4;
> > >                 break;
> > >         case TN48M_SFP_PRESENT:
> > >                 config.reg_dat_base = base;
> > > +               config.ngpio = 4;
> > >                 break;
> > >         case TN48M_SFP_LOS:
> > >                 config.reg_dat_base = base;
> > > +               config.ngpio = 4;
> > > +               break;
> > > +       case TN4810M_SFP_TX_DISABLE:
> > > +               config.reg_set_base = base;
> > > +               config.ngpio = 48;
> > > +               break;
> > > +       case TN4810M_SFP_TX_FAULT:
> > > +               config.reg_dat_base = base;
> > > +               config.ngpio = 48;
> > > +               break;
> > > +       case TN4810M_SFP_PRESENT:
> > > +               config.reg_dat_base = base;
> > > +               config.ngpio = 48;
> > > +               break;
> > > +       case TN4810M_SFP_LOS:
> > > +               config.reg_dat_base = base;
> > > +               config.ngpio = 48;
> > >                 break;
> > >         default:
> > >                 dev_err(&pdev->dev, "unknown type %d\n", type);
> > > @@ -67,9 +90,34 @@ static int tn48m_gpio_probe(struct platform_device *pdev)
> > >  }
> > >
> > >  static const struct of_device_id tn48m_gpio_of_match[] = {
> > > -       { .compatible = "delta,tn48m-gpio-sfp-tx-disable", .data = (void *)TN48M_SFP_TX_DISABLE },
> > > -       { .compatible = "delta,tn48m-gpio-sfp-present", .data = (void *)TN48M_SFP_PRESENT },
> > > -       { .compatible = "delta,tn48m-gpio-sfp-los", .data = (void *)TN48M_SFP_LOS },
> > > +       {
> > > +               .compatible = "delta,tn48m-gpio-sfp-tx-disable",
> > > +               .data = (void *)TN48M_SFP_TX_DISABLE
> > > +       },
> > > +       {
> > > +               .compatible = "delta,tn48m-gpio-sfp-present",
> > > +               .data = (void *)TN48M_SFP_PRESENT
> > > +       },
> > > +       {
> > > +               .compatible = "delta,tn48m-gpio-sfp-los",
> > > +               .data = (void *)TN48M_SFP_LOS
> > > +       },
> > > +       {
> > > +               .compatible = "delta,tn4810m-gpio-sfp-tx-disable",
> > > +               .data = (void *)TN4810M_SFP_TX_DISABLE
> > > +       },
> > > +       {
> > > +               .compatible = "delta,tn4810m-gpio-sfp-tx-fault",
> > > +               .data = (void *)TN4810M_SFP_TX_FAULT
> > > +       },
> > > +       {
> > > +               .compatible = "delta,tn4810m-gpio-sfp-present",
> > > +               .data = (void *)TN4810M_SFP_PRESENT
> > > +       },
> > > +       {
> > > +               .compatible = "delta,tn4810m-gpio-sfp-los",
> > > +               .data = (void *)TN4810M_SFP_LOS
> > > +       },
> > >         { }
> > >  };
> > >  MODULE_DEVICE_TABLE(of, tn48m_gpio_of_match);
> > > --
> > > 2.31.1
> > >
> >
> > This looks good to me. I suppose the other patches are going in
> > through the MFD tree. I don't see anything that can fail here at
> > build-time - can you confirm that I can pick these patches up
> > separately for v5.15?
> >
> > Bartosz
>
> Scratch that, I now saw Linus' comment about the special purpose pins
> under the other series. Let's clear that up first.

Yeah,
I have finally replied to Linus,
hopefully, we can clear it up.

Thanks,
Robert
>
> Bart



-- 
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko@sartura.hr
Web: www.sartura.hr

      reply	other threads:[~2021-08-03 19:24 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-16 22:17 [PATCH 1/2] gpio: tn48m: Add support for Delta TN4810M CPLD Robert Marko
2021-07-16 22:17 ` [PATCH 2/2] dt-bindings: gpio: tn48m: document TN4810M support Robert Marko
2021-09-22 10:16   ` Bartosz Golaszewski
2021-09-22 10:24     ` Robert Marko
2021-08-02 12:10 ` [PATCH 1/2] gpio: tn48m: Add support for Delta TN4810M CPLD Bartosz Golaszewski
2021-08-02 12:12   ` Bartosz Golaszewski
2021-08-03 19:24     ` Robert Marko [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CA+HBbNGZ7=bfVQ0k6Yz6ywomBpf7upG7gOxN8dJEd6ErdWzaMA@mail.gmail.com' \
    --to=robert.marko@sartura.hr \
    --cc=bgolaszewski@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luka.perkov@sartura.hr \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.