All of lore.kernel.org
 help / color / mirror / Atom feed
From: Robert Marko <robert.marko@sartura.hr>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	robh+dt@kernel.org, linux-arm-msm <linux-arm-msm@vger.kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: John Crispin <john@phrozen.org>,
	Luka Perkov <luka.perkov@sartura.hr>,
	Vinod Koul <vkoul@kernel.org>
Subject: Re: [PATCH v8] ARM: dts: qcom: ipq4019: add USB devicetree nodes
Date: Fri, 2 Oct 2020 19:39:15 +0200	[thread overview]
Message-ID: <CA+HBbNGZmeejTPszL1jf_01wZP6xZqRyZUa15XpO+y6JCw3ajg@mail.gmail.com> (raw)
In-Reply-To: <20200909163831.1894142-1-robert.marko@sartura.hr>

On Wed, Sep 9, 2020 at 6:38 PM Robert Marko <robert.marko@sartura.hr> wrote:
>
> From: John Crispin <john@phrozen.org>
>
> Since we now have driver for the USB PHY, and USB controller is already supported by the DWC3 driver lets add the necessary nodes to DTSI.
>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Robert Marko <robert.marko@sartura.hr>
> Cc: Luka Perkov <luka.perkov@sartura.hr>
> Reviewed-by: Vinod Koul <vkoul@kernel.org>
> ---
> Changes from v7 to v8:
> * Add labels for usb2 and usb3 nodes
> Changes from v6 to v7:
> * Remove changes to qcom-ipq4019-ap.dk01.1.dtsi
> It has slipped in unwanted, we only want to add
> nodes to the DTSI.
>
>  arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++++
>  1 file changed, 74 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> index 74d8e2c8e4b3..4a973253024a 100644
> --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> @@ -605,5 +605,79 @@ ethphy4: ethernet-phy@4 {
>                                 reg = <4>;
>                         };
>                 };
> +
> +               usb3_ss_phy: ssphy@9a000 {
> +                       compatible = "qcom,usb-ss-ipq4019-phy";
> +                       #phy-cells = <0>;
> +                       reg = <0x9a000 0x800>;
> +                       reg-names = "phy_base";
> +                       resets = <&gcc USB3_UNIPHY_PHY_ARES>;
> +                       reset-names = "por_rst";
> +                       status = "disabled";
> +               };
> +
> +               usb3_hs_phy: hsphy@a6000 {
> +                       compatible = "qcom,usb-hs-ipq4019-phy";
> +                       #phy-cells = <0>;
> +                       reg = <0xa6000 0x40>;
> +                       reg-names = "phy_base";
> +                       resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
> +                       reset-names = "por_rst", "srif_rst";
> +                       status = "disabled";
> +               };
> +
> +               usb3: usb3@8af8800 {
> +                       compatible = "qcom,dwc3";
> +                       reg = <0x8af8800 0x100>;
> +                       #address-cells = <1>;
> +                       #size-cells = <1>;
> +                       clocks = <&gcc GCC_USB3_MASTER_CLK>,
> +                                <&gcc GCC_USB3_SLEEP_CLK>,
> +                                <&gcc GCC_USB3_MOCK_UTMI_CLK>;
> +                       clock-names = "master", "sleep", "mock_utmi";
> +                       ranges;
> +                       status = "disabled";
> +
> +                       dwc3@8a00000 {
> +                               compatible = "snps,dwc3";
> +                               reg = <0x8a00000 0xf8000>;
> +                               interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
> +                               phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
> +                               phy-names = "usb2-phy", "usb3-phy";
> +                               dr_mode = "host";
> +                       };
> +               };
> +
> +               usb2_hs_phy: hsphy@a8000 {
> +                       compatible = "qcom,usb-hs-ipq4019-phy";
> +                       #phy-cells = <0>;
> +                       reg = <0xa8000 0x40>;
> +                       reg-names = "phy_base";
> +                       resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
> +                       reset-names = "por_rst", "srif_rst";
> +                       status = "disabled";
> +               };
> +
> +               usb2: usb2@60f8800 {
> +                       compatible = "qcom,dwc3";
> +                       reg = <0x60f8800 0x100>;
> +                       #address-cells = <1>;
> +                       #size-cells = <1>;
> +                       clocks = <&gcc GCC_USB2_MASTER_CLK>,
> +                                <&gcc GCC_USB2_SLEEP_CLK>,
> +                                <&gcc GCC_USB2_MOCK_UTMI_CLK>;
> +                       clock-names = "master", "sleep", "mock_utmi";
> +                       ranges;
> +                       status = "disabled";
> +
> +                       dwc3@6000000 {
> +                               compatible = "snps,dwc3";
> +                               reg = <0x6000000 0xf8000>;
> +                               interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
> +                               phys = <&usb2_hs_phy>;
> +                               phy-names = "usb2-phy";
> +                               dr_mode = "host";
> +                       };
> +               };
>         };
>  };
> --
> 2.26.2
>

Hi,
Is there an issue with the patch preventing the review?

Regards,
Robert

  reply	other threads:[~2020-10-02 17:39 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-09 16:38 Robert Marko
2020-10-02 17:39 ` Robert Marko [this message]
2020-11-04 13:44 ` Robert Marko
2021-01-22 21:40 ` patchwork-bot+linux-arm-msm

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CA+HBbNGZmeejTPszL1jf_01wZP6xZqRyZUa15XpO+y6JCw3ajg@mail.gmail.com \
    --to=robert.marko@sartura.hr \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=john@phrozen.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luka.perkov@sartura.hr \
    --cc=robh+dt@kernel.org \
    --cc=vkoul@kernel.org \
    --subject='Re: [PATCH v8] ARM: dts: qcom: ipq4019: add USB devicetree nodes' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.