All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandru Ardelean <ardeleanalex@gmail.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: Alexandru Ardelean <alexandru.ardelean@analog.com>,
	linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
	LKML <linux-kernel@vger.kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	jdelvare@suse.com, "Thoren, Mark" <mark.thoren@analog.com>
Subject: Re: [PATCH v2 2/4] docs: hwmon: (ltc2945): change type of val to ULL in ltc2945_val_to_reg()
Date: Wed, 11 Nov 2020 17:28:51 +0200	[thread overview]
Message-ID: <CA+U=DsrOTOZr2pmwAH7T6Jt8TZXNsLJBza482tmFOkyGLuGvAg@mail.gmail.com> (raw)
In-Reply-To: <41f86559-9165-40f9-e7f3-3e7f5eca7315@roeck-us.net>

On Wed, Nov 11, 2020 at 4:54 PM Guenter Roeck <linux@roeck-us.net> wrote:
>
> On 11/11/20 1:12 AM, Alexandru Ardelean wrote:
> > In order to account for any potential overflows that could occur.
> >
> > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
>
> Thinking about it, this can only really happen if the user provides
> excessive values for limit attributes. Those are currently clamped
> later, after the conversion. I think it would be better to modify
> the code to apply a clamp _before_ the conversion as well instead
> of trying to solve the overflow problem with unsigned long long.
>
> Either case, can you send me a register dump for this chip ?

I asked Mark to help out on this.
Right now I don't have a board around my home-office.
I"m just pulling patches from our own tree to send upstream.
Is there a specific command you have in mind for this i2cdump?

Is the output of something like this fine:
# i2cdump -r 0x00-0x31 1 0x6f
?

We have a board that's being developed with this driver (and chip).
I think Mark will try to read values from the eval-board [since he has
one around].

Thanks
Alex

> I'd like to write a module test script to actually check if there
> are any over/underflows or other problems.
>
> Thanks,
> Guenter
>
> > ---
> >  drivers/hwmon/ltc2945.c | 12 ++++++------
> >  1 file changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/hwmon/ltc2945.c b/drivers/hwmon/ltc2945.c
> > index 1cea710df668..6d4569a25471 100644
> > --- a/drivers/hwmon/ltc2945.c
> > +++ b/drivers/hwmon/ltc2945.c
> > @@ -155,7 +155,7 @@ static long long ltc2945_reg_to_val(struct device *dev, u8 reg)
> >  }
> >
> >  static int ltc2945_val_to_reg(struct device *dev, u8 reg,
> > -                           unsigned long val)
> > +                           unsigned long long val)
> >  {
> >       struct ltc2945_state *st = dev_get_drvdata(dev);
> >       struct regmap *regmap = st->regmap;
> > @@ -181,14 +181,14 @@ static int ltc2945_val_to_reg(struct device *dev, u8 reg,
> >                       return ret;
> >               if (control & CONTROL_MULT_SELECT) {
> >                       /* 25 mV * 25 uV = 0.625 uV resolution. */
> > -                     val = DIV_ROUND_CLOSEST(val, 625);
> > +                     val = DIV_ROUND_CLOSEST_ULL(val, 625);
> >               } else {
> >                       /*
> >                        * 0.5 mV * 25 uV = 0.0125 uV resolution.
> >                        * Divide first to avoid overflow;
> >                        * accept loss of accuracy.
> >                        */
> > -                     val = DIV_ROUND_CLOSEST(val, 25) * 2;
> > +                     val = DIV_ROUND_CLOSEST_ULL(val, 25) * 2;
> >               }
> >               break;
> >       case LTC2945_VIN_H:
> > @@ -197,7 +197,7 @@ static int ltc2945_val_to_reg(struct device *dev, u8 reg,
> >       case LTC2945_MAX_VIN_THRES_H:
> >       case LTC2945_MIN_VIN_THRES_H:
> >               /* 25 mV resolution. */
> > -             val /= 25;
> > +             val = div_u64(val, 25);
> >               break;
> >       case LTC2945_ADIN_H:
> >       case LTC2945_MAX_ADIN_H:
> > @@ -219,7 +219,7 @@ static int ltc2945_val_to_reg(struct device *dev, u8 reg,
> >                * dividing the reported current by the sense resistor value
> >                * in mOhm.
> >                */
> > -             val = DIV_ROUND_CLOSEST(val, 25);
> > +             val = DIV_ROUND_CLOSEST_ULL(val, 25);
> >               break;
> >       default:
> >               return -EINVAL;
> > @@ -247,7 +247,7 @@ static ssize_t ltc2945_value_store(struct device *dev,
> >       struct ltc2945_state *st = dev_get_drvdata(dev);
> >       struct regmap *regmap = st->regmap;
> >       u8 reg = attr->index;
> > -     unsigned long val;
> > +     unsigned long long val;
> >       u8 regbuf[3];
> >       int num_regs;
> >       int regval;
> >
>

  reply	other threads:[~2020-11-11 15:29 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-11  9:12 [PATCH v2 0/4] hwmon: (ltc2945): add support for sense resistor Alexandru Ardelean
2020-11-11  9:12 ` [PATCH v2 1/4] hwmon: (ltc2945): wrap regmap into an ltc2945_state struct Alexandru Ardelean
2020-11-11  9:12 ` [PATCH v2 2/4] docs: hwmon: (ltc2945): change type of val to ULL in ltc2945_val_to_reg() Alexandru Ardelean
2020-11-11 14:54   ` Guenter Roeck
2020-11-11 15:28     ` Alexandru Ardelean [this message]
2020-11-11 15:44       ` Guenter Roeck
2020-11-18 14:40     ` Alexandru Ardelean
2020-11-18 15:19       ` Guenter Roeck
2020-11-13  7:25   ` kernel test robot
2020-11-11  9:12 ` [PATCH v2 3/4] hwmon: (ltc2945): add support for sense resistor Alexandru Ardelean
2020-11-18 14:43   ` Alexandru Ardelean
2020-11-18 15:21     ` Guenter Roeck
2020-11-11  9:12 ` [PATCH v2 4/4] dt-bindings: hwmon: ltc2945: add device tree doc for ltc2945 Alexandru Ardelean
2020-11-16 17:36   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CA+U=DsrOTOZr2pmwAH7T6Jt8TZXNsLJBza482tmFOkyGLuGvAg@mail.gmail.com' \
    --to=ardeleanalex@gmail.com \
    --cc=alexandru.ardelean@analog.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mark.thoren@analog.com \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH v2 2/4] docs: hwmon: (ltc2945): change type of val to ULL in ltc2945_val_to_reg()' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.